Edge V U-Boot

DDR Version 1.19 20190305
In
channel 0
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 1
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 0 training pass!
channel 1 training pass!
change freq to 400MHz 0,1
channel 0
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 1
CS = 0
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
CS = 1
MR0=0x19
MR4=0x3
MR5=0x6
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0xFF
channel 0 training pass!
channel 1 training pass!
change freq to 800MHz 1,0
Channel 0: LPDDR4,800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 239
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67837
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:          loader1, start:0x40, size:0x1f80
GPT part:  1, name:            uboot, start:0x4000, size:0x2000
GPT part:  2, name:            trust, start:0x6000, size:0x2000
GPT part:  3, name:             misc, start:0x8000, size:0x2000
GPT part:  4, name:         resource, start:0xa000, size:0x8000
GPT part:  5, name:           kernel, start:0x12000, size:0x2e000
GPT part:  6, name:           rootfs, start:0x40000, size:0x39fdfdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf27c4
RunBL31 0x10000

NOTICE:  BL31: v1.3(debug):370ab80
NOTICE:  BL31: Built : 09:23:41, Mar  4 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09 (Aug 08 2019 - 13:27:57 +0530)

Model: Khadas Edge
PreSerial: 2
DRAM:  3.8 GiB
Relocation Offset is: f5bde000
Sysmem: init
I2c speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd-log init 950000 uV
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment

Model: Khadas Edge
Bootdev(atags): mmc 0
PartType: EFI
boot mode: None
Load FDT from resource part
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
Detailed mode clock 120000 kHz, flags[a]
    H: 1080 1184 1188 1315
    V: 1920 1924 1926 1929
bus_format: 100e
final DSI-Link bandwidth: 996 Mbps x 4
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 24000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 120000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Setting bus to 8
I2c speed: 100000Hz
normal power off
boot wol: disable
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc_init: -95, time 9
** Bad device mmc 1 **
cfgload: fatload: no boot.ini or empty file
** File not found /boot/boot.ini **
cfgload: ext4load: no boot.ini or empty file
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Scanning mmc 0:7...
Found U-Boot script /boot/boot.scr
4311 bytes read in 48 ms (86.9 KiB/s)
## Executing script at 00500000
Run Khadas boot script
board type = Edge-V (2)
Uboot loaded from eMMC.
99 bytes read in 51 ms (1000 Bytes/s)
Import env.txt
DTB: /boot/dtb/rk3399-khadas-edgev-linux.dtb
mac address: 98:63:14:70:42:e4
Scanning mmc 0:6...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Scanning mmc 0:7...
6616354 bytes read in 123 ms (51.3 MiB/s)
19746824 bytes read in 202 ms (93.2 MiB/s)
95310 bytes read in 67 ms (1.4 MiB/s)
## Loading init Ramdisk from Legacy Image at 0a200000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    6616290 Bytes = 6.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
  'reserved-memory' region@110000: addr=110000 size=f0000
   Loading Ramdisk to e9774000, end e9dc34e2 ... OK
   Loading Device Tree to 00000000e9759000, end 00000000e977344d ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Can't find file:logo_kernel.bmp
Can't find file:logo_kernel.bmp
Total: 3729.677 ms

Starting kernel ...


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.167 (mohit@mohit-H110M-S2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP Fri Aug 2 15:17:48 IST 2019
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ed6000 s46376 r8192 d31448 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc wol_enable=0 earlyprintk console=ttyFIQ0,1500000n8 console=tty0 rw root=UUID=ba5f9ca7-eb01-449e-9539-836d2c617d3c rootfstype=ext4 init=/sbin/init rootwait board_type=2 board_type_name=Edge-V fan=auto mac=98:63:14:70:42:e4 androidboot.mac=98:63:14:70:42:e4 coherent_pool=2M image_type=EMMC
[    0.000000] uboot setup mac-addr: 98:63:14:70:42:e4
[    0.000000] realtek init mac-addr: 98:63:14:70:42:e4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xef200000-0xf3200000] (64MB) mapped at [ffffffc0ef200000-ffffffc0f31fffff]
[    0.000000] Memory: 3862684K/4030464K available (11774K kernel code, 1748K rwdata, 4588K rodata, 1152K init, 1993K bss, 167780K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009080000 - 0xffffff80091a0000   (  1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008c00000   ( 11776 KB)
[    0.000000]     .rodata : 0xffffff8008c00000 - 0xffffff8009080000   (  4608 KB)
[    0.000000]       .data : 0xffffff80091a0000 - 0xffffff8009355008   (  1749 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @eed00000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000eec90000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000eeca0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001384] Console: colour dummy device 80x25
[    0.003188] console [tty0] enabled
[    0.003232] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003294] pid_max: default: 32768 minimum: 301
[    0.003520] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003559] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004355] Initializing cgroup subsys io
[    0.004399] Initializing cgroup subsys memory
[    0.004457] Initializing cgroup subsys devices
[    0.004496] Initializing cgroup subsys freezer
[    0.004533] Initializing cgroup subsys net_cls
[    0.004569] Initializing cgroup subsys perf_event
[    0.004606] Initializing cgroup subsys net_prio
[    0.004647] Initializing cgroup subsys hugetlb
[    0.004682] Initializing cgroup subsys pids
[    0.004745] ftrace: allocating 43656 entries in 171 pages
[    0.123367] sched-energy: Sched-energy-costs installed from DT
[    0.123414] CPU0: update cpu_capacity 401
[    0.123493] ASID allocator initialised with 32768 entries
[    0.127215] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.127801] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.129196] Detected VIPT I-cache on CPU1
[    0.129229] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.129258] CPU1: using LPI pending table @0x00000000eef30000
[    0.129305] CPU1: update cpu_capacity 401
[    0.129309] CPU1: Booted secondary processor [410fd034]
[    0.129874] Detected VIPT I-cache on CPU2
[    0.129894] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.129922] CPU2: using LPI pending table @0x00000000eef60000
[    0.129949] CPU2: update cpu_capacity 401
[    0.129952] CPU2: Booted secondary processor [410fd034]
[    0.130528] Detected VIPT I-cache on CPU3
[    0.130547] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.130574] CPU3: using LPI pending table @0x00000000eefb0000
[    0.130600] CPU3: update cpu_capacity 401
[    0.130603] CPU3: Booted secondary processor [410fd034]
[    0.131154] Detected PIPT I-cache on CPU4
[    0.131181] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.131220] CPU4: using LPI pending table @0x00000000eeff0000
[    0.131258] CPU4: update cpu_capacity 1024
[    0.131261] CPU4: Booted secondary processor [410fd082]
[    0.131829] Detected PIPT I-cache on CPU5
[    0.131847] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.131883] CPU5: using LPI pending table @0x00000000ee420000
[    0.131910] CPU5: update cpu_capacity 1024
[    0.131913] CPU5: Booted secondary processor [410fd082]
[    0.132000] Brought up 6 CPUs
[    0.132682] SMP: Total of 6 processors activated.
[    0.132715] CPU features: detected feature: GIC system register CPU interface
[    0.132749] CPU features: detected feature: 32-bit EL0 Support
[    0.132785] CPU: All CPU(s) started at EL2
[    0.132855] alternatives: patching kernel code
[    0.134292] devtmpfs: initialized
[    0.151414] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.151471] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.151994] xor: measuring software checksum speed
[    0.190425]    8regs     :  2855.000 MB/sec
[    0.230486]    8regs_prefetch:  2552.000 MB/sec
[    0.270548]    32regs    :  3191.000 MB/sec
[    0.310610]    32regs_prefetch:  2845.000 MB/sec
[    0.310629] xor: using function: 32regs (3191.000 MB/sec)
[    0.310664] pinctrl core: initialized pinctrl subsystem
[    0.311457] NET: Registered protocol family 16
[    0.324588] cpuidle: using governor ladder
[    0.336609] cpuidle: using governor menu
[    0.336648] Registered FIQ tty driver
[    0.337034] vdso: 2 pages (1 code @ ffffff8008c06000, 1 data @ ffffff80091a4000)
[    0.337089] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.338132] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.359450] console [pstore-1] enabled
[    0.359476] pstore: Registered ramoops as persistent store backend
[    0.359500] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.431277] console [ttyFIQ0] enabled
[    0.431837] Registered fiq debugger ttyFIQ0
[    0.518964] raid6: int64x1  gen()   451 MB/s
[    0.587041] raid6: int64x1  xor()   360 MB/s
[    0.655153] raid6: int64x2  gen()   772 MB/s
[    0.723254] raid6: int64x2  xor()   598 MB/s
[    0.791382] raid6: int64x4  gen()  1110 MB/s
[    0.859479] raid6: int64x4  xor()   669 MB/s
[    0.927614] raid6: int64x8  gen()   859 MB/s
[    0.995657] raid6: int64x8  xor()   629 MB/s
[    1.063784] raid6: neonx1   gen()   913 MB/s
[    1.131891] raid6: neonx1   xor()   623 MB/s
[    1.200009] raid6: neonx2   gen()  1549 MB/s
[    1.268080] raid6: neonx2   xor()   976 MB/s
[    1.336205] raid6: neonx4   gen()  1966 MB/s
[    1.404287] raid6: neonx4   xor()  1171 MB/s
[    1.472403] raid6: neonx8   gen()  1694 MB/s
[    1.540491] raid6: neonx8   xor()  1247 MB/s
[    1.540881] raid6: using algorithm neonx4 gen() 1966 MB/s
[    1.541375] raid6: .... xor() 1171 MB/s, rmw enabled
[    1.541833] raid6: using intx1 recovery algorithm
[    1.545733] iommu: Adding device ff650000.vpu_service to group 0
[    1.546355] iommu: Adding device ff660000.rkvdec to group 1
[    1.546963] iommu: Adding device ff8f0000.vop to group 2
[    1.547531] iommu: Adding device ff900000.vop to group 3
[    1.548492] rk_iommu ff650800.iommu: can't get sclk
[    1.549186] rk_iommu ff660480.iommu: can't get sclk
[    1.549824] rk_iommu ff8f3f00.iommu: can't get sclk
[    1.550428] rk_iommu ff903f00.iommu: can't get sclk
[    1.551232] SCSI subsystem initialized
[    1.551927] usbcore: registered new interface driver usbfs
[    1.552490] usbcore: registered new interface driver hub
[    1.553064] usbcore: registered new device driver usb
[    1.553594] media: Linux media interface: v0.10
[    1.554043] Linux video capture interface: v2.00
[    1.554542] pps_core: LinuxPPS API ver. 1 registered
[    1.555002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.555845] PTP clock support registered
[    1.557320] Advanced Linux Sound Architecture Driver Initialized.
[    1.558370] Bluetooth: Core ver 2.21
[    1.558724] NET: Registered protocol family 31
[    1.559138] Bluetooth: HCI device and connection manager initialized
[    1.559719] Bluetooth: HCI socket layer initialized
[    1.560170] Bluetooth: L2CAP socket layer initialized
[    1.560662] Bluetooth: SCO socket layer initialized
[    1.562279] clocksource: Switched to clocksource arch_sys_counter
[    1.605237] FS-Cache: Loaded
[    1.614107] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.615101] NET: Registered protocol family 2
[    1.615943] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.616872] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.618412] TCP: Hash tables configured (established 32768 bind 32768)
[    1.619125] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    1.619851] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    1.620844] NET: Registered protocol family 1
[    1.621560] RPC: Registered named UNIX socket transport module.
[    1.622110] RPC: Registered udp transport module.
[    1.622572] RPC: Registered tcp transport module.
[    1.623008] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.624326] Trying to unpack rootfs image as initramfs...
[    1.924299] Freeing initrd memory: 6460K
[    1.925269] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.926103] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.930161] Initialise system trusted keyring
[    1.931066] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.939810] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.941279] NFS: Registering the id_resolver key type
[    1.941762] Key type id_resolver registered
[    1.942152] Key type id_legacy registered
[    1.942783] FS-Cache: Netfs 'cifs' registered for caching
[    1.943532] Key type cifs.spnego registered
[    1.943937] Key type cifs.idmap registered
[    1.944326] fuse init (API version 7.23)
[    1.945076] SGI XFS with security attributes, no debug enabled
[    1.950981] NET: Registered protocol family 38
[    1.951425] Key type asymmetric registered
[    1.951811] Asymmetric key parser 'x509' registered
[    1.952422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.953240] io scheduler noop registered
[    1.953612] io scheduler deadline registered
[    1.954031] io scheduler cfq registered (default)
[    1.956142] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[    1.962108] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.962824] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.963427] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.964005] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.964624] PCI host bridge /pcie@f8000000 ranges:
[    1.965073]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.965548]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.510328] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    2.510979] rockchip-pcie f8000000.pcie: deferred probe failed
[    2.511627] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    2.513386] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    2.514353] rk-vcodec ff650000.vpu_service: probe device
[    2.515150] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    2.516516] rk-vcodec ff650000.vpu_service: could not find power_model node
[    2.517164] rk-vcodec ff650000.vpu_service: init success
[    2.518057] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    2.519093] rk-vcodec ff660000.rkvdec: probe device
[    2.519782] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    2.520769] rk-vcodec ff660000.rkvdec: could not find power_model node
[    2.521361] rk-vcodec ff660000.rkvdec: init success
[    2.523286] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.523983] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.526222] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.526934] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.529641] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    2.530835] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 34, base_baud = 1500000) is a 16550A
[    2.532691] [drm] Initialized drm 1.1.0 20060810
[    2.536851] [drm] Rockchip DRM driver version: v1.0.1
[    2.539358] mali ff9a0000.gpu: Failed to get regulator
[    2.539832] mali ff9a0000.gpu: Power control initialization failed
[    2.540751] Unable to detect cache hierarchy for CPU 0
[    2.542001] brd: module loaded
[    2.547558] loop: module loaded
[    2.548177] lkdtm: No crash points registered, enable through debugfs
[    2.551496] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.552140] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.552660] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    2.553194] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.553915] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.554572] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.560133] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.560749] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.561209]  Ring mode enabled
[    2.561494]  DMA HW capability register supported
[    2.561897]  Normal descriptors
[    2.562228]  RX Checksum Offload Engine supported (type 2)
[    2.562744]  TX Checksum insertion supported
[    2.563133]  Wake-Up On Lan supported
[    2.563507]  Enable RX Mitigation via HW Watchdog Timer
[    2.698724] libphy: stmmac: probed
[    2.699060] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.699649] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    2.701464] usbcore: registered new interface driver rndis_wlan
[    2.702266] Rockchip WiFi SYS interface (V1.00) ...
[    2.702886] usbcore: registered new interface driver rtl8150
[    2.703467] usbcore: registered new interface driver r8152
[    2.704041] usbcore: registered new interface driver asix
[    2.704591] usbcore: registered new interface driver ax88179_178a
[    2.705198] usbcore: registered new interface driver cdc_ether
[    2.705783] usbcore: registered new interface driver cdc_eem
[    2.706386] usbcore: registered new interface driver rndis_host
[    2.707019] usbcore: registered new interface driver cdc_ncm
[    2.707593] usbcore: registered new interface driver cdc_mbim
[    2.710091] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    2.715574] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.717232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.717836] ehci-pci: EHCI PCI platform driver
[    2.718355] ehci-platform: EHCI generic platform driver
[    2.722314] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.723004] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    2.723828] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    2.734298] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.735014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.735630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.736300] usb usb1: Product: EHCI Host Controller
[    2.736749] usb usb1: Manufacturer: Linux 4.4.167 ehci_hcd
[    2.737256] usb usb1: SerialNumber: fe3c0000.usb
[    2.738318] hub 1-0:1.0: USB hub found
[    2.738726] hub 1-0:1.0: 1 port detected
[    2.739934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.740582] ohci-platform: OHCI generic platform driver
[    2.741756] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    2.742670] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[   24.130276] Watchdog detected hard LOCKUP on cpu 1
[   24.130705] ------------[ cut here ]------------
[   24.131183] WARNING: at kernel/watchdog.c:352
[   24.131592] Modules linked in:
[   24.131900]
[   24.132071] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.167 #1