API tools faq
paste
Advertisement
zombah

u-boot-gpt 8GB lubuntu-12-10 kernel+ramdisk

zombah
Nov 4th, 2013
228
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 37.96 KB | None | 0 0
raw download clone embed print report
  1. 3471996 bytes read in 253 ms (13.1 MiB/s)
  2. 2484355 bytes read in 200 ms (11.8 MiB/s)
  3. Kernel image @ 0x1000000 [ 0x000000 - 0x34fa7c ]
  4. ## Loading init Ramdisk from Legacy Image at 02200000 ...
  5. Image Name: MyRamDisk
  6. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  7. Data Size: 2484291 Bytes = 2.4 MiB
  8. Load Address: 00000000
  9. Entry Point: 00000000
  10. Verifying Checksum ... OK
  11.  
  12. Starting kernel ...
  13.  
  14. Uncompressing Linux... done, booting the kernel.
  15. <6>Initializing cgroup subsys cpuset
  16. <6>Initializing cgroup subsys cpu
  17. <5>Linux version 3.1.10-6-ac100 (buildd@meissa) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #9-Ubuntu SMP Wed Oct 3 16:27:06 UTC 2012
  18. CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  19. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  20. Machine: Toshiba AC100 / Dynabook AZ
  21. [ 0.000000] Initializing cgroup subsys cpuset
  22. [ 0.000000] Initializing cgroup subsys cpu
  23. [ 0.000000] Linux version 3.1.10-6-ac100 (buildd@meissa) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #9-Ubuntu SMP Wed Oct 3 16:27:06 UTC 2012
  24. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  25. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  26. [ 0.000000] Machine: Toshiba AC100 / Dynabook AZ
  27. <6>bootconsole [earlycon0] enabled
  28. [ 0.000000] bootconsole [earlycon0] enabled
  29. <6>Tegra reserved memory:
  30. LP0: 00000000 - 00000000
  31. Bootloader framebuffer: 00000000 - 00000000
  32. Framebuffer: 1c000000 - 1c7fffff
  33. 2nd Framebuffer: 1c800000 - 1d7fffff
  34. Carveout: 1d800000 - 1fffffff
  35. Vpr: 00000000 - 00000000
  36. [ 0.000000] Tegra reserved memory:
  37. [ 0.000000] LP0: 00000000 - 00000000
  38. [ 0.000000] Bootloader framebuffer: 00000000 - 00000000
  39. [ 0.000000] Framebuffer: 1c000000 - 1c7fffff
  40. [ 0.000000] 2nd Framebuffer: 1c800000 - 1d7fffff
  41. [ 0.000000] Carveout: 1d800000 - 1fffffff
  42. [ 0.000000] Vpr: 00000000 - 00000000
  43. Memory policy: ECC disabled, Data cache writealloc
  44. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  45. <7>On node 0 totalpages: 114688
  46. <7>free_area_init_node: node 0, pgdat c075b240, node_mem_map c07f4000
  47. <7> Normal zone: 1024 pages used for memmap
  48. <7> Normal zone: 0 pages reserved
  49. <7> Normal zone: 113664 pages, LIFO batch:31
  50. <6>Tegra SKU: 8 Rev: A02 CPU Process: 2 Core Process: 1 Speedo ID: 0
  51. [ 0.000000] Tegra SKU: 8 Rev: A02 CPU Process: 2 Core Process: 1 Speedo ID: 0
  52. <6>Tegra Revision: A02 SKU: 0x8 CPU Process: 2 Core Process: 1
  53. [ 0.000000] Tegra Revision: A02 SKU: 0x8 CPU Process: 2 Core Process: 1
  54. <3>Failed to set parent pll_c_out1 for sclk (violates clock limit 240000000)
  55. [ 0.000000] Failed to set parent pll_c_out1 for sclk (violates clock limit 240000000)
  56. <4>Unable to set parent pll_c_out1 of clock sclk: -22
  57. [ 0.000000] Unable to set parent pll_c_out1 of clock sclk: -22
  58. <6>L310 cache controller enabled
  59. [ 0.000000] L310 cache controller enabled
  60. <6>l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  61. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  62. <6>PERCPU: Embedded 8 pages/cpu @c0bf8000 s11136 r8192 d13440 u32768
  63. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0bf8000 s11136 r8192 d13440 u32768
  64. <7>pcpu-alloc: s11136 r8192 d13440 u32768 alloc=8*4096
  65. <7>pcpu-alloc: [0] 0 [0] 1
  66. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  67. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  68. <5>Kernel command line: mem=512M@0 root=/dev/mmcblk1p1 console=ttyS0,115200n8 quite silent earlyprintk rootwait
  69. [ 0.000000] Kernel command line: mem=512M@0 root=/dev/mmcblk1p1 console=ttyS0,115200n8 quite silent earlyprintk rootwait
  70. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  71. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  72. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  73. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  74. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  75. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  76. <6>allocated 2097152 bytes of page_cgroup
  77. [ 0.000000] allocated 2097152 bytes of page_cgroup
  78. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  79. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  80. <6>Memory:[ 0.000000] Memory: 448MB 448MB = 448MB total
  81. = 448MB total
  82. <5>Memory: 441552k/441552k available, 82736k reserved, 0K highmem
  83. [ 0.000000] Memory: 441552k/441552k available, 82736k reserved, 0K highmem
  84. <5>Virtual kernel memory layout:
  85. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  86. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  87. DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  88. vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  89. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  90. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  91. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  92. .text : 0xc0008000 - 0xc06ab1cc (6797 kB)
  93. .init : 0xc06ac000 - 0xc06feb80 ( 331 kB)
  94. .data : 0xc0700000 - 0xc075e99c ( 379 kB)
  95. .bss : 0xc075e9c0 - 0xc07f3988 ( 596 kB)
  96. [ 0.000000] Virtual kernel memory layout:
  97. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  98. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  99. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  100. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  101. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  102. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  103. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  104. [ 0.000000] .text : 0xc0008000 - 0xc06ab1cc (6797 kB)
  105. [ 0.000000] .init : 0xc06ac000 - 0xc06feb80 ( 331 kB)
  106. [ 0.000000] .data : 0xc0700000 - 0xc075e99c ( 379 kB)
  107. [ 0.000000] .bss : 0xc075e9c0 - 0xc07f3988 ( 596 kB)
  108. <6>Hierarchical RCU implementation.
  109. [ 0.000000] Hierarchical RCU implementation.
  110. <6>NR_IRQS:480
  111. [ 0.000000] NR_IRQS:480
  112. <6>sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  113. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  114. <6>Console: colour dummy device 80x30
  115. [ 0.000000] Console: colour dummy device 80x30
  116. <6>Calibrating delay loop... [ 0.010839] Calibrating delay loop... <c>1993.93 BogoMIPS (lpj=9969664)
  117. 1993.93 BogoMIPS (lpj=9969664)
  118. <6>pid_max: default: 32768 minimum: 301
  119. [ 0.079763] pid_max: default: 32768 minimum: 301
  120. <6>Security Framework initialized
  121. [ 0.087806] Security Framework initialized
  122. <6>AppArmor: AppArmor initialized
  123. [ 0.095222] AppArmor: AppArmor initialized
  124. <6>Mount-cache hash table entries: 512
  125. [ 0.103106] Mount-cache hash table entries: 512
  126. <6>Initializing cgroup subsys cpuacct
  127. [ 0.111886] Initializing cgroup subsys cpuacct
  128. <6>Initializing cgroup subsys memory
  129. [ 0.119940] Initializing cgroup subsys memory
  130. <6>Initializing cgroup subsys devices
  131. [ 0.127981] Initializing cgroup subsys devices
  132. <6>Initializing cgroup subsys freezer
  133. [ 0.136086] Initializing cgroup subsys freezer
  134. <6>CPU: Testing write buffer coherency: [ 0.144323] CPU: Testing write buffer coherency: ok
  135. ok
  136. <6>ftrace: allocating 19312 entries in 57 pages
  137. [ 0.154129] ftrace: allocating 19312 entries in 57 pages
  138. <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  139. [ 0.181295] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  140. CPU1: Booted secondary processor
  141. <6>Brought up 2 CPUs
  142. [ 0.193453] CPU1: Booted secondary processor
  143. [ 0.195465] Brought up 2 CPUs
  144. <6>SMP: Total of 2 processors activated (3987.86 BogoMIPS).
  145. [ 0.208459] SMP: Total of 2 processors activated (3987.86 BogoMIPS).
  146. <6>devtmpfs: initialized
  147. [ 0.217961] devtmpfs: initialized
  148. <6>print_constraints: dummy:
  149. [ 0.226819] print_constraints: dummy:
  150. <6>NET: Registered protocol family 16
  151. [ 0.234400] NET: Registered protocol family 16
  152. <6>host1x bus init
  153. [ 0.241481] host1x bus init
  154. <6>Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  155. [ 0.249991] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  156. <4>The pingroup DTA was configured to <UNKNOWN> instead of RSVD1
  157. [ 0.410964] The pingroup DTA was configured to <UNKNOWN> instead of RSVD1
  158. <4>The pingroup DTB was configured to <UNKNOWN> instead of RSVD1
  159. [ 0.423926] The pingroup DTB was configured to <UNKNOWN> instead of RSVD1
  160. <4>The pingroup DTC was configured to <UNKNOWN> instead of RSVD1
  161. [ 0.436882] The pingroup DTC was configured to <UNKNOWN> instead of RSVD1
  162. <4>The pingroup DTD was configured to <UNKNOWN> instead of RSVD1
  163. [ 0.449834] The pingroup DTD was configured to <UNKNOWN> instead of RSVD1
  164. <4>The pingroup DTE was configured to <UNKNOWN> instead of RSVD1
  165. [ 0.462787] The pingroup DTE was configured to <UNKNOWN> instead of RSVD1
  166. <4>The pingroup SPDI was configured to <UNKNOWN> instead of RSVD2
  167. [ 0.476061] The pingroup SPDI was configured to <UNKNOWN> instead of RSVD2
  168. <4>The pingroup SPDO was configured to <UNKNOWN> instead of RSVD2
  169. [ 0.489193] The pingroup SPDO was configured to <UNKNOWN> instead of RSVD2
  170. <4>The pingroup SPIF was configured to <UNKNOWN> instead of RSVD4
  171. [ 0.502339] The pingroup SPIF was configured to <UNKNOWN> instead of RSVD4
  172. <4>The pingroup UAC was configured to <UNKNOWN> instead of RSVD4
  173. [ 0.515394] The pingroup UAC was configured to <UNKNOWN> instead of RSVD4
  174. <6>serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
  175. [ 0.528584] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
  176. <6>console [ttyS0] enabled, bootconsole disabled
  177. [ 0.540129] console [ttyS0] enabled, bootconsole disabled
  178. [ 0.540129] console [ttyS0] enabled, bootconsole disabled
  179. <4>tegra_init_suspend: Suspend mode LP0 requested, no lp0_vec provided by bootlader -- disabling LP0
  180. [ 0.624057] tegra_init_suspend: Suspend mode LP0 requested, no lp0_vec provided by bootlader -- disabling LP0
  181. <6>hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  182. [ 0.641103] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  183. <6>hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  184. [ 0.654315] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  185. <6>hw-breakpoint: maximum watchpoint size is 4 bytes.
  186. [ 0.666532] hw-breakpoint: maximum watchpoint size is 4 bytes.
  187. <6>tegra_arb_init: initialized
  188. [ 0.675389] tegra_arb_init: initialized
  189. <6>tegra_iovmm_register: added iovmm-gart
  190. [ 0.683116] tegra_iovmm_register: added iovmm-gart
  191. <6>bio: create slab <bio-0> at 0
  192. [ 0.700393] bio: create slab <bio-0> at 0
  193. <5>SCSI subsystem initialized
  194. [ 0.707816] SCSI subsystem initialized
  195. <6>usbcore: registered new interface driver usbfs
  196. [ 0.716328] usbcore: registered new interface driver usbfs
  197. <6>usbcore: registered new interface driver hub
  198. [ 0.726231] usbcore: registered new interface driver hub
  199. <6>usbcore: registered new device driver usb
  200. [ 0.735741] usbcore: registered new device driver usb
  201. <6>tegra-otg tegra-otg: otg transceiver registered
  202. [ 0.745506] tegra-otg tegra-otg: otg transceiver registered
  203. <6>tps6586x 4-0034: VERSIONCRC is 05
  204. [ 0.758386] tps6586x 4-0034: VERSIONCRC is 05
  205. <7>tps6586x-regulator tps6586x-regulator.0: Probing reulator 0
  206. <6>print_constraints: REG-SM_0: 725 <--> 1300 mV at 1225 mV normal standby
  207. [ 0.777051] print_constraints: REG-SM_0: 725 <--> 1300 mV at 1225 mV normal standby
  208. <7>tps6586x-regulator tps6586x-regulator.1: Probing reulator 1
  209. <6>print_constraints: REG-SM_1: 725 <--> 1125 mV at 1100 mV normal standby
  210. [ 0.798147] print_constraints: REG-SM_1: 725 <--> 1125 mV at 1100 mV normal standby
  211. <7>tps6586x-regulator tps6586x-regulator.2: Probing reulator 2
  212. <6>print_constraints: REG-SM_2: 3700 mV normal standby
  213. [ 0.817934] print_constraints: REG-SM_2: 3700 mV normal standby
  214. <7>tps6586x-regulator tps6586x-regulator.3: Probing reulator 3
  215. <6>print_constraints: REG-LDO_0: 3300 mV normal standby
  216. [ 0.835662] print_constraints: REG-LDO_0: 3300 mV normal standby
  217. <7>tps6586x-regulator tps6586x-regulator.4: Probing reulator 4
  218. <6>print_constraints: REG-LDO_1: 1100 mV normal standby
  219. [ 0.853631] print_constraints: REG-LDO_1: 1100 mV normal standby
  220. <7>tps6586x-regulator tps6586x-regulator.5: Probing reulator 5
  221. <6>print_constraints: REG-LDO_2: 725 <--> 1275 mV at 1225 mV normal standby
  222. [ 0.872919] print_constraints: REG-LDO_2: 725 <--> 1275 mV at 1225 mV normal standby
  223. <7>tps6586x-regulator tps6586x-regulator.6: Probing reulator 6
  224. <6>print_constraints: REG-LDO_3: 3300 mV normal standby
  225. [ 0.892625] print_constraints: REG-LDO_3: 3300 mV normal standby
  226. <7>tps6586x-regulator tps6586x-regulator.7: Probing reulator 7
  227. <6>print_constraints: REG-LDO_4: 1800 mV normal standby
  228. [ 0.910869] print_constraints: REG-LDO_4: 1800 mV normal standby
  229. <7>tps6586x-regulator tps6586x-regulator.8: Probing reulator 8
  230. <6>print_constraints: REG-LDO_5: 2850 mV normal standby
  231. [ 0.928523] print_constraints: REG-LDO_5: 2850 mV normal standby
  232. <7>tps6586x-regulator tps6586x-regulator.9: Probing reulator 9
  233. <6>print_constraints: REG-LDO_6: 1800 mV normal standby
  234. [ 0.946323] print_constraints: REG-LDO_6: 1800 mV normal standby
  235. <7>tps6586x-regulator tps6586x-regulator.10: Probing reulator 10
  236. <6>print_constraints: REG-LDO_7: 3300 mV normal standby
  237. [ 0.964342] print_constraints: REG-LDO_7: 3300 mV normal standby
  238. <7>tps6586x-regulator tps6586x-regulator.11: Probing reulator 11
  239. <6>print_constraints: REG-LDO_8: 1800 mV normal standby
  240. [ 0.982338] print_constraints: REG-LDO_8: 1800 mV normal standby
  241. <7>tps6586x-regulator tps6586x-regulator.12: Probing reulator 12
  242. <6>print_constraints: REG-LDO_9: 2850 mV normal standby
  243. [ 1.000190] print_constraints: REG-LDO_9: 2850 mV normal standby
  244. <6>NetLabel: Initializing
  245. [ 1.009421] NetLabel: Initializing
  246. <6>NetLabel: domain hash size = 128
  247. [ 1.016205] NetLabel: domain hash size = 128
  248. <6>NetLabel: protocols = UNLABELED CIPSOv4
  249. [ 1.024580] NetLabel: protocols = UNLABELED CIPSOv4
  250. <6>NetLabel: unlabeled traffic allowed by default
  251. [ 1.034209] NetLabel: unlabeled traffic allowed by default
  252. <6>Switching to clocksource timer_us
  253. [ 1.043324] Switching to clocksource timer_us
  254. <6>Switched to NOHz mode on CPU #1
  255. <6>Switched to NOHz mode on CPU #0
  256. [ 1.056710] Switched to NOHz mode on CPU #1
  257. [ 1.059931] Switched to NOHz mode on CPU #0
  258. <5>FS-Cache: Loaded
  259. [ 1.070295] FS-Cache: Loaded
  260. <6>CacheFiles: Loaded
  261. [ 1.075410] CacheFiles: Loaded
  262. <6>AppArmor: AppArmor Filesystem Enabled
  263. [ 1.082319] AppArmor: AppArmor Filesystem Enabled
  264. <6>nvmap_page_pool_init: nvmap uc page pool size=13798 pages[ 1.092449] nvmap_page_pool_init: nvmap uc page pool size=13798 pages<6>nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=13798,totalram=110388, freeram=95945, totalhigh=0, freehigh=0
  265. [ 1.117560] nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=13798,totalram=110388, freeram=95945, totalhigh=0, freehigh=0<6>nvmap_page_pool_init: nvmap wc page pool size=13798 pages
  266. [ 1.175530] nvmap_page_pool_init: nvmap wc page pool size=13798 pages<6>nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=13798,totalram=110388, freeram=82088, totalhigh=0, freehigh=0
  267. [ 1.200855] nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=13798,totalram=110388, freeram=82088, totalhigh=0, freehigh=0<6>nvmap_page_pool_init: nvmap iwb page pool size=13798 pages
  268. [ 1.258946] nvmap_page_pool_init: nvmap iwb page pool size=13798 pages<6>nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=13798,totalram=110388, freeram=68231, totalhigh=0, freehigh=0
  269. [ 1.284476] nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=13798,totalram=110388, freeram=68231, totalhigh=0, freehigh=0<6>tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  270.  
  271. [ 1.342937] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  272. <6>tegra-nvmap tegra-nvmap: created carveout generic-0 (40960KiB)
  273. [ 1.356907] tegra-nvmap tegra-nvmap: created carveout generic-0 (40960KiB)
  274. <6>NET: Registered protocol family 2
  275. [ 1.376217] NET: Registered protocol family 2
  276. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  277. [ 1.386879] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  278. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  279. [ 1.400839] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  280. <6>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  281. [ 1.413968] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  282. <6>TCP: Hash tables configured (established 16384 bind 16384)
  283. [ 1.426402] TCP: Hash tables configured (established 16384 bind 16384)
  284. <6>TCP reno registered
  285. [ 1.435070] TCP reno registered
  286. <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
  287. [ 1.443123] UDP hash table entries: 256 (order: 1, 8192 bytes)
  288. <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  289. [ 1.454330] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  290. <6>NET: Registered protocol family 1
  291. [ 1.464243] NET: Registered protocol family 1
  292. <7>PCI: CLS 0 bytes, default 32
  293. <6>Trying to unpack rootfs image as initramfs...
  294. [ 1.476181] Trying to unpack rootfs image as initramfs...
  295. <6>Freeing initrd memory: 2424K
  296. [ 1.608109] Freeing initrd memory: 2424K
  297. <6>host1x host1x: initialized
  298. [ 1.615703] host1x host1x: initialized
  299. <6>PMU: registered new PMU device of type 0
  300. [ 1.623559] PMU: registered new PMU device of type 0
  301. <6>audit: initializing netlink socket (disabled)
  302. [ 1.633947] audit: initializing netlink socket (disabled)
  303. <5>type=2000 audit(73.809:1): initialized
  304. [ 1.643335] type=2000 audit(73.809:1): initialized
  305. <5>VFS: Disk quotas dquot_6.5.2
  306. [ 1.718921] VFS: Disk quotas dquot_6.5.2
  307. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  308. [ 1.728407] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  309. <6>msgmni has been set to 867
  310. [ 1.738568] msgmni has been set to 867
  311. <6>io scheduler noop registered (default)
  312. [ 1.747228] io scheduler noop registered (default)
  313. <6>io scheduler deadline registered
  314. [ 1.755328] io scheduler deadline registered
  315. <6>io scheduler cfq registered
  316. [ 1.762502] io scheduler cfq registered
  317. <6>mpe mpe: initialized
  318. [ 1.769828] mpe mpe: initialized
  319. <6>gr3d gr3d: initialized
  320. [ 1.776380] gr3d gr3d: initialized
  321. <6>gr2d gr2d: initialized
  322. [ 1.783051] gr2d gr2d: initialized
  323. <6>isp isp: initialized
  324. [ 1.788867] isp isp: initialized
  325. <6>vi vi: initialized
  326. [ 1.794333] vi vi: initialized
  327. <6>tegradc tegradc.0: probed
  328. [ 2.003778] tegradc tegradc.0: probed
  329. <6>Console: switching to colour frame buffer device 128x37
  330. [ 2.044618] Console: switching to colour frame buffer device 128x37
  331. <6>tegradc tegradc.0: probed
  332. [ 2.090431] tegradc tegradc.0: probed
  333. <6>nvhdcp: using "always on" policy.
  334. [ 2.102141] nvhdcp: using "always on" policy.
  335. <6>tegradc tegradc.1: probed
  336. [ 2.109568] tegradc tegradc.1: probed
  337. <6>tegradc tegradc.1: probed
  338. [ 2.116322] tegradc tegradc.1: probed
  339. <6>Initialized tegra uart driver
  340. [ 2.123478] Initialized tegra uart driver
  341. <6>brd: module loaded
  342. [ 2.130182] brd: module loaded
  343. <6>loop: module loaded
  344. [ 2.138349] loop: module loaded
  345. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  346. [ 2.147297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  347. <6>tegra USB phy - inst[1] platform info:
  348. [ 2.157719] tegra USB phy - inst[1] platform info:
  349. <6>port_otg: no
  350. [ 2.164032] port_otg: no
  351. <6>has_hostpc: no
  352. [ 2.168250] has_hostpc: no
  353. <6>phy_interface: USB_PHY_INTF_ULPI_LINK
  354. [ 2.174707] phy_interface: USB_PHY_INTF_ULPI_LINK
  355. <6>op_mode: TEGRA_USB_OPMODE_HOST
  356. [ 2.182533] op_mode: TEGRA_USB_OPMODE_HOST
  357. <6>vbus_gpio: -1
  358. [ 2.188226] vbus_gpio: -1
  359. <6>vbus_reg: NULL
  360. [ 2.192543] vbus_reg: NULL
  361. <6>hot_plug: disabled
  362. [ 2.197294] hot_plug: disabled
  363. <6>remote_wakeup: disabled
  364. [ 2.202846] remote_wakeup: disabled
  365. <6>tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  366. [ 2.223942] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  367. <6>tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  368. [ 2.236545] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  369. <6>tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
  370. [ 2.272632] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
  371. <6>tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  372. [ 2.302705] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  373. <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  374. [ 2.314566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  375. <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  376. [ 2.327667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  377. <6>usb usb1: Product: Tegra EHCI Host Controller
  378. [ 2.339330] usb usb1: Product: Tegra EHCI Host Controller
  379. <6>usb usb1: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  380. [ 2.349879] usb usb1: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  381. <6>usb usb1: SerialNumber: tegra-ehci.1
  382. [ 2.359612] usb usb1: SerialNumber: tegra-ehci.1
  383. <6>hub 1-0:1.0: USB hub found
  384. [ 2.367427] hub 1-0:1.0: USB hub found
  385. <6>hub 1-0:1.0: 1 port detected
  386. [ 2.374132] hub 1-0:1.0: 1 port detected
  387. <3>Failed lp0 wake enable for irq=53
  388. [ 2.381596] Failed lp0 wake enable for irq=53
  389. <6>tegra USB phy - inst[2] platform info:
  390. [ 2.389787] tegra USB phy - inst[2] platform info:
  391. <6>port_otg: no
  392. [ 2.396091] port_otg: no
  393. <6>has_hostpc: no
  394. [ 2.400314] has_hostpc: no
  395. <6>phy_interface: USB_PHY_INTF_UTMI
  396. [ 2.406299] phy_interface: USB_PHY_INTF_UTMI
  397. <6>op_mode: TEGRA_USB_OPMODE_HOST
  398. [ 2.413684] op_mode: TEGRA_USB_OPMODE_HOST
  399. <6>vbus_gpio: -1
  400. [ 2.419382] vbus_gpio: -1
  401. <6>vbus_reg: NULL
  402. [ 2.423682] vbus_reg: NULL
  403. <6>hot_plug: enabled
  404. [ 2.428334] hot_plug: enabled
  405. <6>remote_wakeup: disabled
  406. [ 2.433789] remote_wakeup: disabled
  407. <4>create_regulator: REG-LDO_3: Failed to create debugfs directory
  408. [ 2.443340] create_regulator: REG-LDO_3: Failed to create debugfs directory
  409. <6>tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  410. [ 2.457914] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  411. <6>tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  412. [ 2.470513] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  413. <6>tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  414. [ 2.512723] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  415. <6>tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  416. [ 2.542700] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  417. <6>utmi_phy_irq: usb device plugged-in
  418. [ 2.552180] utmi_phy_irq: usb device plugged-in
  419. <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  420. [ 2.562617] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  421. <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  422. [ 2.575718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  423. <6>usb usb2: Product: Tegra EHCI Host Controller
  424. [ 2.587387] usb usb2: Product: Tegra EHCI Host Controller
  425. <6>usb usb2: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  426. [ 2.597939] usb usb2: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  427. <6>usb usb2: SerialNumber: tegra-ehci.2
  428. [ 2.607673] usb usb2: SerialNumber: tegra-ehci.2
  429. <6>hub 2-0:1.0: USB hub found
  430. [ 2.615519] hub 2-0:1.0: USB hub found
  431. <6>hub 2-0:1.0: 1 port detected
  432. [ 2.622219] hub 2-0:1.0: 1 port detected
  433. <3>Failed lp0 wake enable for irq=129
  434. [ 2.629734] Failed lp0 wake enable for irq=129
  435. <6>Initializing USB Mass Storage driver...
  436. [ 2.638176] Initializing USB Mass Storage driver...
  437. <6>usbcore: registered new interface driver usb-storage
  438. [ 2.648205] usbcore: registered new interface driver usb-storage
  439. <6>USB Mass Storage support registered.
  440. [ 2.657853] USB Mass Storage support registered.
  441. <6>usbcore: registered new interface driver libusual
  442. [ 2.667342] usbcore: registered new interface driver libusual
  443. <6>Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  444. [ 2.680291] Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  445. <6>tegra USB phy - inst[0] platform info:
  446. [ 2.692263] tegra USB phy - inst[0] platform info:
  447. <6>port_otg: yes
  448. [ 2.698644] port_otg: yes
  449. <6>has_hostpc: no
  450. [ 2.702956] has_hostpc: no
  451. <6>phy_interface: USB_PHY_INTF_UTMI
  452. [ 2.708941] phy_interface: USB_PHY_INTF_UTMI
  453. <6>op_mode: TEGRA_USB_OPMODE_DEVICE
  454. [ 2.716497] op_mode: TEGRA_USB_OPMODE_DEVICE
  455. <6>vbus_pmu_irq: 0
  456. [ 2.722550] vbus_pmu_irq: 0
  457. <6>vbus_gpio: -1
  458. [ 2.726934] vbus_gpio: -1
  459. <6>charging: disabled
  460. [ 2.731600] charging: disabled
  461. <6>remote_wakeup: disabled
  462. [ 2.737133] remote_wakeup: disabled
  463. <4>create_regulator: REG-LDO_3: Failed to create debugfs directory
  464. [ 2.746703<] create_regulator: REG-LDO_3: Failed to create debugfs directory
  465. 6>usb 1-1: new high speed USB device number 2 using tegra-ehci
  466. [ 2.759421] usb 1-1: new high speed USB device number 2 using tegra-ehci
  467. <6>tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  468. [ 2.780139] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  469. <6>mousedev: PS/2 mouse device common for all mice
  470. [ 2.794563] mousedev: PS/2 mouse device common for all mice
  471. <6>tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  472. [ 2.807881] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  473. <6>trpc_sema_init: registered misc dev 10:56
  474. [ 2.820160] trpc_sema_init: registered misc dev 10:56
  475. <6>trpc_node_register: Adding 'local' to node list
  476. [ 2.829945] trpc_node_register: Adding 'local' to node list
  477. <6>tegra_avp_probe: allocated carveout memory at 1ff00000 for AVP kernel
  478. [ 2.842237] tegra_avp_probe: allocated carveout memory at 1ff00000 for AVP kernel
  479. <6>trpc_node_register: Adding 'avp-remote' to node list
  480. [ 2.854861] trpc_node_register: Adding 'avp-remote' to node list
  481. <6>tegra_avp_probe: message area 10db0000/10db0110
  482. [ 2.865687] tegra_avp_probe: message area 10db0000/10db0110
  483. <6>cpuidle: using governor ladder
  484. [ 2.874721] cpuidle: using governor ladder
  485. <6>cpuidle: using governor menu
  486. [ 2.881943] cpuidle: using governor menu
  487. <6>sdhci: Secure Digital Host Controller Interface driver
  488. [ 2.891125] sdhci: Secure Digital Host Controller Interface driver
  489. <6>sdhci: Copyright(c) Pierre Ossman
  490. [ 2.900688] sdhci: Copyright(c) Pierre Ossman
  491. <6>sdhci-pltfm: SDHCI platform and OF driver helper
  492. [ 2.909753] sdhci-pltfm: SDHCI platform and OF driver helper
  493. <3>usb 1-1: device descriptor read/64, error -71
  494. [ 2.919869] usb 1-1: device descriptor read/64, error -71
  495. <4>mmc0: Invalid maximum block size, assuming 512 bytes
  496. [ 2.930423] mmc0: Invalid maximum block size, assuming 512 bytes
  497. <7>Registered led device: mmc0::
  498. <6>mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  499. [ 2.946207] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  500. <3>Failed gpio lp0 enable for irq=365, error=-22
  501. [ 2.958090] Failed gpio lp0 enable for irq=365, error=-22
  502. <3>sdhci-tegra sdhci-tegra.0: SD card wake-up event registrationfailed with eroor: -22
  503. [ 2.971314] sdhci-tegra sdhci-tegra.0: SD card wake-up event registrationfailed with eroor: -22
  504. <6>sdhci-tegra sdhci-tegra.0: vddio_sdmmc regulator not found: -19.Assuming vddio_sdmmc is not required.
  505. [ 2.989461] sdhci-tegra sdhci-tegra.0: vddio_sdmmc regulator not found: -19.Assuming vddio_sdmmc is not required.
  506. <6>sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -19. Assuming vddio_sd_slot is not required.
  507. [ 3.010615] sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -19. Assuming vddio_sd_slot is not required.
  508. <4>mmc1: Invalid maximum block size, assuming 512 bytes
  509. [ 3.026433] mmc1: Invalid maximum block size, assuming 512 bytes
  510. <6>mmc1: no vmmc regulator found
  511. [ 3.035533] mmc1: no vmmc regulator found
  512. <7>Registered led device: mmc1::
  513. <6>mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  514. [ 3.052180] mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  515. <7>Registered led device: wifi-led
  516. <4>nvec nvec.2: ec firmware version 01.20.00 / f9
  517. [ 3.078096] nvec nvec.2: ec firmware version 01.20.00 / f9
  518. <6>nvec nvec.2: added 6 NVEC subdevices
  519. [ 3.087870] nvec nvec.2: added 6 NVEC subdevices
  520. <6>input: nvec keyboard as /devices/virtual/input/input0
  521. [ 3.099276] input: nvec keyboard as /devices/virtual/input/input0
  522. <7>Registered led device: nvec-led
  523. <6>input: NVEC sleep button as /devices/virtual/input/input1
  524. [ 4.116689] input: NVEC sleep button as /devices/virtual/input/input1
  525. <6>input: NVEC power button as /devices/virtual/input/input2
  526. [ 4.129547] input: NVEC power button as /devices/virtual/input/input2
  527. <6>input: NVEC lid switch button as /devices/virtual/input/input3
  528. [ 4.143063] input: NVEC lid switch button as /devices/virtual/input/input3
  529. <6>oprofile: using arm/armv7-ca9
  530. [ 4.154131] oprofile: using arm/armv7-ca9
  531. <3>usb 1-1: device descriptor read/64, error -71
  532. [ 4.163273] usb 1-1: device descriptor read/64, error -71
  533. <6>Netfilter messages via NETLINK v0.30.
  534. [ 4.173310] Netfilter messages via NETLINK v0.30.
  535. <6>nf_conntrack version 0.5.0 (6937 buckets, 27748 max)
  536. [ 4.183779] nf_conntrack version 0.5.0 (6937 buckets, 27748 max)
  537. <6>ctnetlink v0.93: registering with nfnetlink.
  538. [ 4.195287] ctnetlink v0.93: registering with nfnetlink.
  539. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  540. [ 4.207769] ip_tables: (C) 2000-2006 Netfilter Core Team
  541. <6>TCP cubic registered
  542. [ 4.216065] TCP cubic registered
  543. <6>NET: Registered protocol family 10
  544. [ 4.224042] NET: Registered protocol family 10
  545. <6>NET: Registered protocol family 17
  546. [ 4.235909] NET: Registered protocol family 17
  547. <6>rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
  548. [ 4.246579] rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
  549. <5>Registering the dns_resolver key type
  550. [ 4.257467] Registering the dns_resolver key type
  551. <6>VFP support v0.3: [ 4.264767] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  552. implementor 41 architecture 3 part 30 variant 9 rev 1
  553. <6>ThumbEE CPU extension supported.
  554. [ 4.282161] ThumbEE CPU extension supported.
  555. <5>Registering SWP/SWPB emulation handler
  556. [ 4.290888] Registering SWP/SWPB emulation handler
  557. <4>Disabling clocks left on by bootloader:
  558. [ 4.307717] Disabling clocks left on by bootloader:
  559. <4> audio_2x
  560. [ 4.314009] audio_2x
  561. <4> dsi2-fixed
  562. [ 4.318079] dsi2-fixed
  563. <4> dsi1-fixed
  564. [ 4.322300] dsi1-fixed
  565. <4> vi
  566. [ 4.325822] vi
  567. <4> i2c3-fast
  568. [ 4.329264] i2c3-fast
  569. <4> nor
  570. [ 4.332768] nor
  571. <4> vde
  572. [ 4.335750] vde
  573. <4> bsev
  574. [ 4.338838] bsev
  575. <4> bsea
  576. [ 4.341995] bsea
  577. <4> fuse_burn
  578. [ 4.345629] fuse_burn
  579. <4> clk_d
  580. [ 4.349327] clk_d
  581. <4> pll_p_out2
  582. [ 4.353108] pll_p_out2
  583. <4> pll_c_out1
  584. [ 4.357320] pll_c_out1
  585. <6>CPU rate: 1000 MHz
  586. [ 4.362032] CPU rate: 1000 MHz
  587. <3>tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  588. [ 4.370630] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  589. <6>registered taskstats version 1
  590. [ 4.385903] registered taskstats version 1
  591. <6>mmc0: new high speed MMC card at address 0001
  592. [ 4.395425] mmc0: new high speed MMC card at address 0001
  593. <6>usb 1-1: new high speed USB device number 3 using tegra-ehci
  594. [ 4.406635] usb 1-1: new high speed USB device number 3 using tegra-ehci
  595. <6>input: gpio-keys as /devices/platform/gpio-keys/input/input4
  596. [ 4.419697] input: gpio-keys as /devices/platform/gpio-keys/input/input4
  597. <6>mmcblk0: mmc0:0001 SEM08G 7.39 GiB
  598. [ 4.430375] mmcblk0: mmc0:0001 SEM08G 7.39 GiB
  599. <6>mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB
  600. [ 4.440403] mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB
  601. <6>tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-11-04 12:11:38 UTC (1383567098)
  602. [ 4.454726] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-11-04 12:11:38 UTC (1383567098)
  603. <6>mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB
  604. [ 4.469177] mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB
  605. <6>Freeing init memory: 328K
  606. [ 4.478234] Freeing init memory: 328K
  607. <6>nvtegrapart: hidden_parts =
  608. [ 4.486067] nvtegrapart: hidden_parts =
  609. <6>nvtegrapart: #1 [PT ] start=2048 size=1024
  610. [ 4.494277] nvtegrapart: #1 [PT ] start=2048 size=1024
  611. <6>nvtegrapart: #2 [EBT ] start=3072 size=4096
  612. [ 4.503777] nvtegrapart: #2 [EBT ] start=3072 size=4096
  613. <6>nvtegrapart: #3 [SOS ] start=7168 size=10240
  614. [ 4.513363] nvtegrapart: #3 [SOS ] start=7168 size=10240
  615. <6>nvtegrapart: #4 [LNX ] start=17408 size=16384
  616. [ 4.523127] nvtegrapart: #4 [LNX ] start=17408 size=16384
  617. <6>nvtegrapart: #5 [MBR ] start=33792 size=2048
  618. [ 4.532886] nvtegrapart: #5 [MBR ] start=33792 size=2048
  619. <6>nvtegrapart: #6 [APP ] start=35840 size=1049600
  620. [ 4.542826] nvtegrapart: #6 [APP ] start=35840 size=1049600
  621. <6>nvtegrapart: #7 [CAC ] start=1085440 size=819200
  622. [ 4.553113] nvtegrapart: #7 [CAC ] start=1085440 size=819200
  623. <6>nvtegrapart: #8 [MSC ] start=1904640 size=4096
  624. [ 4.563315] nvtegrapart: #8 [MSC ] start=1904640 size=4096
  625. <6>nvtegrapart: #9 [EM1 ] start=1908736 size=1024
  626. [ 4.573338] nvtegrapart: #9 [EM1 ] start=1908736 size=1024
  627. <6>nvtegrapart: #10 [UDA ] start=1909760 size=8192000
  628. [ 4.583717] nvtegrapart: #10 [UDA ] start=1909760 size=8192000
  629. <6>nvtegrapart: #11 [EM2 ] start=10101760 size=1024
  630. [ 4.594265] nvtegrapart: #11 [EM2 ] start=10101760 size=1024
  631. <6>nvtegrapart: #12 [UDB ] start=10102784 size=5408768
  632. [ 4.604911] nvtegrapart: #12 [UDB ] start=10102784 size=5408768
  633.  
  634. [ 4.611025]
  635. <6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12[ 4.617047] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12<6>tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot1
  636.  
  637. [ 4.634787] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot1
  638. <6> mmcblk0boot1: unknown partition table
  639. [ 4.647358] mmcblk0boot1: unknown partition table
  640. Loading, please wait...
  641. <6>tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot0
  642. [ 4.660725] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot0
  643. <6> mmcblk0boot0: unknown partition table
  644. [ 4.672817] mmcblk0boot0: unknown partition table
  645. <30>udevd[74]: starting version 175
  646. [ 4.702501] udevd[74]: starting version 175
  647. Begin: Loading essential drivers ... done.
  648. Begin: Running /scripts/init-premount ... done.
  649. <3>usb 1-1: device descriptor read/64, error -71
  650. [ 4.742300] usb 1-1: device descriptor read/64, error -71
  651. Begin: Mounting root file system ... <6>mmc1: new high speed SDXC card at address b368
  652. [ 4.768684] mmc1: new high speed SDXC card at address b368
  653. <6>mmcblk1: mmc1:b368 SDC 59.5 GiB
  654. [ 4.822632] mmcblk1: mmc1:b368 SDC 59.5 GiB
  655. <6>tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk1
  656. [ 4.844896] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk1
  657. <6> mmcblk1: p1
  658. [ 4.896103] mmcblk1: p1
  659. <3>usb 1-1: device descriptor read/64, error -71
  660. [ 4.982288] usb 1-1: device descriptor read/64, error -71
  661. <6>usb 1-1: new high speed USB device number 4 using tegra-ehci
  662. [ 5.223574] usb 1-1: new high speed USB device number 4 using tegra-ehci
  663. <6>elantech: assuming hardware version 3 (with firmware version 0x150500)
  664. [ 5.353522] elantech: assuming hardware version 3 (with firmware version 0x150500)
  665. <6>elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
  666. [ 5.398443] elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
  667. <6>input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input5
  668. [ 5.602749] input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input5
  669. <3>usb 1-1: device not accepting address 4, error -71
  670. [ 5.652628] usb 1-1: device not accepting address 4, error -71
  671. <6>usb 1-1: new high speed USB device number 5 using tegra-ehci
  672. [ 5.783512] usb 1-1: new high speed USB device number 5 using tegra-ehci
  673. <3>usb 1-1: device not accepting address 5, error -71
  674. [ 6.212620] usb 1-1: device not accepting address 5, error -71
  675. <3>hub 1-0:1.0: unable to enumerate USB device on port 1
  676. [ 6.223648] hub 1-0:1.0: unable to enumerate USB device on port 1
  677. <6>usb 2-1: new high speed USB device number 2 using tegra-ehci
  678. [ 6.353513] usb 2-1: new high speed USB device number 2 using tegra-ehci
  679. <6>usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  680. [ 6.513878] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  681. <6>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  682. [ 6.526802] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  683. <6>hub 2-1:1.0: USB hub found
  684. [ 6.539595] hub 2-1:1.0: USB hub found
  685. <6>hub 2-1:1.0: 3 ports detected
  686. [ 6.546874] hub 2-1:1.0: 3 ports detected
  687. <6>usb 2-1.2: new high speed USB device number 3 using tegra-ehci
  688. [ 6.833843] usb 2-1.2: new high speed USB device number 3 using tegra-ehci
  689. <6>usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
  690. [ 6.976305] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
  691. <6>usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  692. [ 6.989580] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  693. <6>usb 2-1.2: Product: USB Camera
  694. [ 7.000036] usb 2-1.2: Product: USB Camera
  695. <6>usb 2-1.2: Manufacturer: Generic
  696. [ 7.007421] usb 2-1.2: Manufacturer: Generic
  697. <6>usb 2-1.2: SerialNumber: 200901010001
  698. [ 7.015422] usb 2-1.2: SerialNumber: 200901010001
  699.  
  700. Found lubuntu-12.10-preinstalled-desktop-armhf+ac100.tar.gz on /dev/mmcblk1p1
  701. Verifying lubuntu-12.10-preinstalled-desktop-armhf+ac100.tar.gz please wait ... done.
  702.  
  703.  
  704.  
  705. Ubuntu AC100 Tarball Installer
  706.  
  707. If you enter Y below, all data on /dev/mmcblk0p10 will be destroyed
  708. and Ubuntu will be installed on it. Entering N will reboot.
  709.  
  710. Are you sure you want to proceed? [y/n] Please enter Y or N
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!