Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
- [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CBFFF write-protect
- [ 0.000000] CC000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 07FF00000 mask FFFF00000 write-through
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
- [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
- [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
- [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable)
- [ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
- [ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
- [ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
- [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
- [ 0.000000] RAMDISK: 37857000 - 37fefe54
- [ 0.000000] Allocated new RAMDISK: 008e5000 - 0107de54
- [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefe53 to 008e5000 - 0107de53
- [ 0.000000] ACPI: RSDP 000f6ab0 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 7fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: DSDT 7fee3180 049E4 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
- [ 0.000000] ACPI: FACS 7fee0000 00040
- [ 0.000000] ACPI: HPET 7fee7cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
- [ 0.000000] ACPI: MCFG 7fee7d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: APIC 7fee7bc0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: SSDT 7fee7dc0 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
- [ 0.000000] ACPI: SSDT 7fee8250 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1158MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00008000 - 0000ef00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8]
- [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- [ 0.000000] #5 [00008e1000 - 00008e40f6] BRK ==> [00008e1000 - 00008e40f6]
- [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- [ 0.000000] #7 [00008e5000 - 000107de54] NEW RAMDISK ==> [00008e5000 - 000107de54]
- [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
- [ 0.000000] found SMP MP-table at [c00f5110] f5110
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0007fee0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000002
- [ 0.000000] 0: 0x00000006 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0007fee0
- [ 0.000000] On node 0 totalpages: 523899
- [ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c107f000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2318 pages used for memmap
- [ 0.000000] HighMem zone: 294356 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u1048576
- [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519805
- [ 0.000000] Kernel command line: root=UUID=077e62b3-3ea1-412b-b565-7bcb256e8415 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 10480000 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
- [ 0.000000] Memory: 2050904k/2096000k available (4685k kernel code, 43576k reserved, 2125k data, 660k init, 1186696k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB)
- [ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:440
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2666.831 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.66 BogoMIPS (lpj=10667324)
- [ 0.004017] Security Framework initialized
- [ 0.004033] AppArmor: AppArmor initialized
- [ 0.004038] Mount-cache hash table entries: 512
- [ 0.004130] Initializing cgroup subsys ns
- [ 0.004134] Initializing cgroup subsys cpuacct
- [ 0.004137] Initializing cgroup subsys memory
- [ 0.004142] Initializing cgroup subsys devices
- [ 0.004144] Initializing cgroup subsys freezer
- [ 0.004146] Initializing cgroup subsys net_cls
- [ 0.004162] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004164] CPU: L2 cache: 4096K
- [ 0.004166] CPU: Physical Processor ID: 0
- [ 0.004168] CPU: Processor Core ID: 0
- [ 0.004171] mce: CPU supports 6 MCE banks
- [ 0.004177] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004179] using mwait in idle threads.
- [ 0.004184] Performance Events: Core2 events, Intel PMU driver.
- [ 0.004191] ... version: 2
- [ 0.004192] ... bit width: 40
- [ 0.004193] ... generic registers: 2
- [ 0.004195] ... value mask: 000000ffffffffff
- [ 0.004196] ... max period: 000000007fffffff
- [ 0.004198] ... fixed-purpose events: 3
- [ 0.004199] ... event mask: 0000000700000003
- [ 0.004202] Checking 'hlt' instruction... OK.
- [ 0.022110] ACPI: Core revision 20090903
- [ 0.028019] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.028025] ftrace: allocating 21796 entries in 43 pages
- [ 0.032042] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032340] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.075925] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
- [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 4096K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
- [ 0.160088] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
- [ 0.160094] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.164014] Brought up 2 CPUs
- [ 0.164017] Total of 2 processors activated (10666.97 BogoMIPS).
- [ 0.164540] CPU0 attaching sched-domain:
- [ 0.164542] domain 0: span 0-1 level MC
- [ 0.164544] groups: 0 1
- [ 0.164549] CPU1 attaching sched-domain:
- [ 0.164551] domain 0: span 0-1 level MC
- [ 0.164552] groups: 1 0
- [ 0.164602] devtmpfs: initialized
- [ 0.164602] regulator: core version 0.5
- [ 0.164602] Time: 1:27:00 Date: 02/23/11
- [ 0.164602] NET: Registered protocol family 16
- [ 0.164602] Trying to unpack rootfs image as initramfs...
- [ 0.164602] EISA bus registered
- [ 0.164602] ACPI: bus type pci registered
- [ 0.164602] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
- [ 0.164602] PCI: MCFG area at e0000000 reserved in E820
- [ 0.164602] PCI: Using MMCONFIG for extended config space
- [ 0.164602] PCI: Using configuration type 1 for base access
- [ 0.164602] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.164602] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.164602] mtrr: corrected configuration.
- [ 0.172046] bio: create slab <bio-0> at 0
- [ 0.172545] ACPI: EC: Look up EC in DSDT
- [ 0.176330] ACPI: Interpreter enabled
- [ 0.176336] ACPI: (supports S0 S3 S4 S5)
- [ 0.176355] ACPI: Using IOAPIC for interrupt routing
- [ 0.181141] ACPI: No dock devices found.
- [ 0.181213] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.181299] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.181302] pci 0000:00:01.0: PME# disabled
- [ 0.181363] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
- [ 0.181423] pci 0000:00:1a.1: reg 20 io port: [0xe100-0xe11f]
- [ 0.181484] pci 0000:00:1a.2: reg 20 io port: [0xe500-0xe51f]
- [ 0.181535] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3005000-0xf30053ff]
- [ 0.181605] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3000000-0xf3003fff]
- [ 0.181641] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.181644] pci 0000:00:1b.0: PME# disabled
- [ 0.181697] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.181701] pci 0000:00:1c.0: PME# disabled
- [ 0.181757] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.181760] pci 0000:00:1c.3: PME# disabled
- [ 0.181815] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.181818] pci 0000:00:1c.4: PME# disabled
- [ 0.181865] pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f]
- [ 0.181925] pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f]
- [ 0.181985] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
- [ 0.182036] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3004000-0xf30043ff]
- [ 0.182180] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- [ 0.182183] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
- [ 0.182186] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
- [ 0.182189] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
- [ 0.182236] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
- [ 0.182241] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
- [ 0.182246] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
- [ 0.182250] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
- [ 0.182255] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
- [ 0.182260] pci 0000:00:1f.2: reg 24 io port: [0xfc00-0xfc0f]
- [ 0.182299] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf3006000-0xf30060ff]
- [ 0.182311] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
- [ 0.182348] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]
- [ 0.182353] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]
- [ 0.182358] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]
- [ 0.182363] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]
- [ 0.182368] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]
- [ 0.182373] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
- [ 0.182423] pci 0000:01:00.0: reg 10 32bit mmio: [0xee000000-0xeeffffff]
- [ 0.182430] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.182438] pci 0000:01:00.0: reg 1c 64bit mmio: [0xec000000-0xedffffff]
- [ 0.182443] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f]
- [ 0.182448] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
- [ 0.182501] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
- [ 0.182503] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xefffffff]
- [ 0.182507] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.182542] pci 0000:00:1c.0: bridge io port: [0x9000-0x9fff]
- [ 0.182597] pci 0000:03:00.0: reg 10 io port: [0xb000-0xb007]
- [ 0.182606] pci 0000:03:00.0: reg 14 io port: [0xb100-0xb103]
- [ 0.182614] pci 0000:03:00.0: reg 18 io port: [0xb200-0xb207]
- [ 0.182623] pci 0000:03:00.0: reg 1c io port: [0xb300-0xb303]
- [ 0.182631] pci 0000:03:00.0: reg 20 io port: [0xb400-0xb40f]
- [ 0.182715] pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
- [ 0.182718] pci 0000:00:1c.3: bridge 32bit mmio: [0xf2000000-0xf2ffffff]
- [ 0.182773] pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff]
- [ 0.182793] pci 0000:04:00.0: reg 18 64bit mmio: [0xf1000000-0xf1000fff]
- [ 0.182814] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
- [ 0.182859] pci 0000:04:00.0: supports D1 D2
- [ 0.182860] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.182865] pci 0000:04:00.0: PME# disabled
- [ 0.182912] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
- [ 0.182915] pci 0000:00:1c.4: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
- [ 0.182954] pci 0000:05:01.0: reg 10 io port: [0xd000-0xd01f]
- [ 0.182964] pci 0000:05:01.0: reg 14 64bit mmio: [0xe8000000-0xe81fffff]
- [ 0.182975] pci 0000:05:01.0: reg 1c 64bit mmio: [0xe4000000-0xe7ffffff]
- [ 0.183003] pci 0000:05:01.0: supports D1 D2
- [ 0.183045] pci 0000:00:1e.0: transparent bridge
- [ 0.183048] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
- [ 0.183051] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4000000-0xebffffff]
- [ 0.183072] pci_bus 0000:00: on NUMA node 0
- [ 0.183075] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.183209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.183259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
- [ 0.183315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 0.183362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.196662] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- [ 0.196738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.196814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- [ 0.196889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- [ 0.196965] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.197040] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- [ 0.197114] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
- [ 0.197188] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
- [ 0.197284] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.197288] vgaarb: loaded
- [ 0.197380] SCSI subsystem initialized
- [ 0.197444] libata version 3.00 loaded.
- [ 0.197497] usbcore: registered new interface driver usbfs
- [ 0.197506] usbcore: registered new interface driver hub
- [ 0.197524] usbcore: registered new device driver usb
- [ 0.197620] ACPI: WMI: Mapper loaded
- [ 0.197622] PCI: Using ACPI for IRQ routing
- [ 0.197757] NetLabel: Initializing
- [ 0.197759] NetLabel: domain hash size = 128
- [ 0.197760] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.197769] NetLabel: unlabeled traffic allowed by default
- [ 0.197793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.197798] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.204022] Switching to clocksource tsc
- [ 0.205605] AppArmor: AppArmor Filesystem Enabled
- [ 0.205615] pnp: PnP ACPI init
- [ 0.205625] ACPI: bus type pnp registered
- [ 0.207690] pnp: PnP ACPI: found 13 devices
- [ 0.207692] ACPI: ACPI bus type pnp unregistered
- [ 0.207696] PnPBIOS: Disabled by ACPI PNP
- [ 0.207705] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.207708] system 00:01: ioport range 0x290-0x29f has been reserved
- [ 0.207710] system 00:01: ioport range 0x800-0x87f has been reserved
- [ 0.207712] system 00:01: ioport range 0x290-0x294 has been reserved
- [ 0.207714] system 00:01: ioport range 0x880-0x88f has been reserved
- [ 0.207721] system 00:09: ioport range 0x400-0x4bf could not be reserved
- [ 0.207726] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
- [ 0.207730] system 00:0b: iomem range 0xcce00-0xcffff has been reserved
- [ 0.207732] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
- [ 0.207735] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
- [ 0.207737] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
- [ 0.207739] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
- [ 0.207741] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
- [ 0.207744] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
- [ 0.207746] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.207748] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
- [ 0.207751] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.207753] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.207755] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
- [ 0.207757] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
- [ 0.207760] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
- [ 0.242434] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.242437] pci 0000:00:01.0: IO window: 0xa000-0xafff
- [ 0.242441] pci 0000:00:01.0: MEM window: 0xec000000-0xefffffff
- [ 0.242444] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.242448] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
- [ 0.242450] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
- [ 0.242454] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
- [ 0.242458] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
- [ 0.242463] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
- [ 0.242466] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
- [ 0.242470] pci 0000:00:1c.3: MEM window: 0xf2000000-0xf2ffffff
- [ 0.242473] pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff
- [ 0.242479] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
- [ 0.242481] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
- [ 0.242485] pci 0000:00:1c.4: MEM window: 0xf0000000-0xf1ffffff
- [ 0.242489] pci 0000:00:1c.4: PREFETCH window: 0x80600000-0x807fffff
- [ 0.242494] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
- [ 0.242496] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
- [ 0.242500] pci 0000:00:1e.0: MEM window: 0xe4000000-0xebffffff
- [ 0.242503] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.242515] alloc irq_desc for 16 on node -1
- [ 0.242517] alloc kstat_irqs on node -1
- [ 0.242523] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.242526] pci 0000:00:01.0: setting latency timer to 64
- [ 0.242534] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.242537] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.242544] alloc irq_desc for 19 on node -1
- [ 0.242545] alloc kstat_irqs on node -1
- [ 0.242548] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.242552] pci 0000:00:1c.3: setting latency timer to 64
- [ 0.242558] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.242562] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.242567] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.242571] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.242573] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.242575] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
- [ 0.242577] pci_bus 0000:01: resource 1 mem: [0xec000000-0xefffffff]
- [ 0.242579] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.242581] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
- [ 0.242583] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
- [ 0.242584] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
- [ 0.242586] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
- [ 0.242588] pci_bus 0000:03: resource 1 mem: [0xf2000000-0xf2ffffff]
- [ 0.242590] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
- [ 0.242592] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
- [ 0.242594] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf1ffffff]
- [ 0.242596] pci_bus 0000:04: resource 2 pref mem [0x80600000-0x807fffff]
- [ 0.242598] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
- [ 0.242600] pci_bus 0000:05: resource 1 mem: [0xe4000000-0xebffffff]
- [ 0.242602] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
- [ 0.242604] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
- [ 0.242635] NET: Registered protocol family 2
- [ 0.242721] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.242967] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.243335] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.243514] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.243516] TCP reno registered
- [ 0.243581] NET: Registered protocol family 1
- [ 0.243714] pci 0000:01:00.0: Boot video device
- [ 0.243869] cpufreq-nforce2: No nForce2 chipset.
- [ 0.243889] Scanning for low memory corruption every 60 seconds
- [ 0.243975] audit: initializing netlink socket (disabled)
- [ 0.243983] type=2000 audit(1298424419.243:1): initialized
- [ 0.251521] highmem bounce pool size: 64 pages
- [ 0.251526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.252726] VFS: Disk quotas dquot_6.5.2
- [ 0.252771] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.253204] fuse init (API version 7.13)
- [ 0.253267] msgmni has been set to 1690
- [ 0.253428] alg: No test for stdrng (krng)
- [ 0.253468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.253470] io scheduler noop registered
- [ 0.253472] io scheduler anticipatory registered
- [ 0.253473] io scheduler deadline registered
- [ 0.253504] io scheduler cfq registered (default)
- [ 0.253613] alloc irq_desc for 24 on node -1
- [ 0.253615] alloc kstat_irqs on node -1
- [ 0.253622] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.253628] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.253708] alloc irq_desc for 25 on node -1
- [ 0.253709] alloc kstat_irqs on node -1
- [ 0.253715] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.253721] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.253812] alloc irq_desc for 26 on node -1
- [ 0.253814] alloc kstat_irqs on node -1
- [ 0.253819] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
- [ 0.253826] pcieport 0000:00:1c.3: setting latency timer to 64
- [ 0.253919] alloc irq_desc for 27 on node -1
- [ 0.253921] alloc kstat_irqs on node -1
- [ 0.253926] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
- [ 0.253933] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.253999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.254071] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.254141] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.254144] ACPI: Power Button [PWRB]
- [ 0.254189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.254191] ACPI: Power Button [PWRF]
- [ 0.254463] processor LNXCPU:00: registered as cooling_device0
- [ 0.254598] ACPI: SSDT 7fee81c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
- [ 0.254751] processor LNXCPU:01: registered as cooling_device1
- [ 0.257336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.257423] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.257706] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.258539] brd: module loaded
- [ 0.258893] loop: module loaded
- [ 0.258950] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 0.259019] ata_piix 0000:00:1f.2: version 2.13
- [ 0.259032] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.259036] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
- [ 0.259068] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.259121] scsi0 : ata_piix
- [ 0.259173] scsi1 : ata_piix
- [ 0.259665] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 0.259669] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 0.259685] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.259688] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 0.259717] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 0.259750] scsi2 : ata_piix
- [ 0.259796] isapnp: Scanning for PnP cards...
- [ 0.259796] scsi3 : ata_piix
- [ 0.260248] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
- [ 0.260251] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
- [ 0.260300] pata_acpi 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.260320] pata_acpi 0000:03:00.0: setting latency timer to 64
- [ 0.260331] pata_acpi 0000:03:00.0: PCI INT A disabled
- [ 0.260557] Fixed MDIO Bus: probed
- [ 0.260582] PPP generic driver version 2.4.2
- [ 0.260605] tun: Universal TUN/TAP device driver, 1.6
- [ 0.260606] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.260669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.260682] alloc irq_desc for 18 on node -1
- [ 0.260683] alloc kstat_irqs on node -1
- [ 0.260687] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.260697] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.260700] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.260722] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.264623] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.264635] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3005000
- [ 0.312078] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.312182] usb usb1: configuration #1 chosen from 1 choice
- [ 0.312205] hub 1-0:1.0: USB hub found
- [ 0.312212] hub 1-0:1.0: 6 ports detected
- [ 0.312267] alloc irq_desc for 23 on node -1
- [ 0.312268] alloc kstat_irqs on node -1
- [ 0.312274] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.312286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.312289] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.312317] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.316227] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.316243] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3004000
- [ 0.316247] Freeing initrd memory: 7779k freed
- [ 0.331825] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.331940] usb usb2: configuration #1 chosen from 1 choice
- [ 0.331963] hub 2-0:1.0: USB hub found
- [ 0.331971] hub 2-0:1.0: 6 ports detected
- [ 0.332025] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.332041] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.332083] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.332091] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.332094] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.332125] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.332155] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
- [ 0.332220] usb usb3: configuration #1 chosen from 1 choice
- [ 0.332238] hub 3-0:1.0: USB hub found
- [ 0.332243] hub 3-0:1.0: 2 ports detected
- [ 0.332279] alloc irq_desc for 21 on node -1
- [ 0.332281] alloc kstat_irqs on node -1
- [ 0.332285] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.332289] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.332292] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.332314] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.332338] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
- [ 0.332402] usb usb4: configuration #1 chosen from 1 choice
- [ 0.332423] hub 4-0:1.0: USB hub found
- [ 0.332427] hub 4-0:1.0: 2 ports detected
- [ 0.332459] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.332464] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 0.332466] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.332489] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.332507] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
- [ 0.332574] usb usb5: configuration #1 chosen from 1 choice
- [ 0.332597] hub 5-0:1.0: USB hub found
- [ 0.332603] hub 5-0:1.0: 2 ports detected
- [ 0.332636] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.332641] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.332643] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.332665] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.332684] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
- [ 0.332748] usb usb6: configuration #1 chosen from 1 choice
- [ 0.332770] hub 6-0:1.0: USB hub found
- [ 0.332775] hub 6-0:1.0: 2 ports detected
- [ 0.332807] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.332811] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.332814] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.332835] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.332855] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
- [ 0.332919] usb usb7: configuration #1 chosen from 1 choice
- [ 0.332938] hub 7-0:1.0: USB hub found
- [ 0.332942] hub 7-0:1.0: 2 ports detected
- [ 0.332975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.332979] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.332982] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.333003] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.333022] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
- [ 0.333086] usb usb8: configuration #1 chosen from 1 choice
- [ 0.333105] hub 8-0:1.0: USB hub found
- [ 0.333109] hub 8-0:1.0: 2 ports detected
- [ 0.333185] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.333549] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.333554] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.333646] mice: PS/2 mouse device common for all mice
- [ 0.333747] rtc_cmos 00:03: RTC can wake from S4
- [ 0.333781] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.333802] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.333879] device-mapper: uevent: version 1.0.3
- [ 0.333966] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.334011] device-mapper: multipath: version 1.1.0 loaded
- [ 0.334014] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.334092] EISA: Probing bus 0 at eisa.0
- [ 0.334115] EISA: Detected 0 cards.
- [ 0.334166] cpuidle: using governor ladder
- [ 0.334168] cpuidle: using governor menu
- [ 0.334487] TCP cubic registered
- [ 0.334601] NET: Registered protocol family 10
- [ 0.334968] lo: Disabled Privacy Extensions
- [ 0.335226] NET: Registered protocol family 17
- [ 0.336777] Using IPI No-Shortcut mode
- [ 0.336862] PM: Resume from disk failed.
- [ 0.336876] registered taskstats version 1
- [ 0.337230] Magic number: 15:730:458
- [ 0.337291] rtc_cmos 00:03: setting system clock to 2011-02-23 01:27:00 UTC (1298424420)
- [ 0.337294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.337295] EDD information not available.
- [ 0.624667] isapnp: No Plug & Play device found
- [ 0.634454] ata4: SATA link down (SStatus 0 SControl 300)
- [ 0.780086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.780195] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.780242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.788506] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB01, max UDMA/100
- [ 0.796450] ata3.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
- [ 0.796453] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.804325] ata1.00: configured for UDMA/100
- [ 0.812907] ata3.00: configured for UDMA/133
- [ 0.816349] ata2.00: HPA unlocked: 625140335 -> 625142448, native 625142448
- [ 0.816353] ata2.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
- [ 0.816356] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.816604] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB01 PQ: 0 ANSI: 5
- [ 0.833223] ata2.00: configured for UDMA/133
- [ 0.835640] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.835642] Uniform CD-ROM driver Revision: 3.20
- [ 0.835729] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 0.835774] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 0.835882] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
- [ 0.835959] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 0.835972] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 0.835992] sd 1:0:0:0: [sda] Write Protect is off
- [ 0.835994] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.836037] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.836055] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
- [ 0.836130] sda:
- [ 0.836134] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 0.836177] sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- [ 0.836213] sd 2:0:0:0: [sdb] Write Protect is off
- [ 0.836215] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.836236] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.836335] sdb: sda1 sda2 < sdb2
- [ 0.841106] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 0.858087] sda5 >
- [ 0.858308] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 0.858318] Freeing unused kernel memory: 660k freed
- [ 0.858517] Write protecting the kernel text: 4688k
- [ 0.858547] Write protecting the kernel read-only data: 1844k
- [ 0.870383] udev: starting version 151
- [ 0.931559] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.931592] pata_jmicron 0000:03:00.0: setting latency timer to 64
- [ 0.941207] scsi4 : pata_jmicron
- [ 0.944601] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.944616] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.944652] r8169 0000:04:00.0: setting latency timer to 64
- [ 0.944705] alloc irq_desc for 28 on node -1
- [ 0.944706] alloc kstat_irqs on node -1
- [ 0.944719] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
- [ 0.945207] eth0: RTL8168b/8111b at 0xf805e000, 00:1a:4d:54:e9:a0, XID 18000000 IRQ 28
- [ 0.945752] scsi5 : pata_jmicron
- [ 0.946324] ata5: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 19
- [ 0.946327] ata6: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 19
- [ 0.951068] Floppy drive(s): fd0 is 1.44M
- [ 0.968069] FDC 0 is a post-1991 82077
- [ 1.012055] usb 4-1: new low speed USB device using uhci_hcd and address 2
- [ 1.135002] kjournald starting. Commit interval 5 seconds
- [ 1.135007] EXT3-fs: mounted filesystem with ordered data mode.
- [ 1.191379] usb 4-1: configuration #1 chosen from 1 choice
- [ 1.432530] usb 4-2: new low speed USB device using uhci_hcd and address 3
- [ 1.605360] usb 4-2: configuration #1 chosen from 1 choice
- [ 1.848530] usb 6-2: new full speed USB device using uhci_hcd and address 2
- [ 2.035672] usb 6-2: configuration #1 chosen from 1 choice
- [ 3.247008] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- [ 3.312203] EXT3 FS on sda1, internal journal
- [ 3.494913] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k
- [ 5.348251] udev: starting version 151
- [ 7.695534] vga16fb: initializing
- [ 7.695537] vga16fb: mapped to 0xc00a0000
- [ 7.695663] fb0: VGA16 VGA frame buffer device
- [ 7.700446] Linux agpgart interface v0.103
- [ 7.860404] lp: driver loaded but no devices found
- [ 8.358709] nvidia: module license 'NVIDIA' taints kernel.
- [ 8.358712] Disabling lock debugging due to kernel taint
- [ 9.170805] parport_pc 00:08: reported by Plug and Play ACPI
- [ 9.170846] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 9.250730] ppdev: user-space parallel port driver
- [ 9.251391] usbcore: registered new interface driver hiddev
- [ 9.264638] lp0: using parport0 (interrupt-driven).
- [ 9.266045] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
- [ 9.266096] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input0
- [ 9.284046] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
- [ 9.284117] generic-usb 0003:046D:C404.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.1-2/input0
- [ 9.284136] usbcore: registered new interface driver usbhid
- [ 9.284139] usbhid: v2.6:USB HID core driver
- [ 9.415318] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 9.415325] nvidia 0000:01:00.0: setting latency timer to 64
- [ 9.415329] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 9.415454] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.18 Tue Jan 18 21:44:45 PST 2011
- [ 9.808251] type=1505 audit(1298424429.967:2): operation="profile_load" pid=573 name="/sbin/dhclient3"
- [ 9.808846] type=1505 audit(1298424429.971:3): operation="profile_load" pid=573 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 9.809147] type=1505 audit(1298424429.971:4): operation="profile_load" pid=573 name="/usr/lib/connman/scripts/dhclient-script"
- [ 9.809665] type=1505 audit(1298424429.971:5): operation="profile_replace" pid=557 name="/sbin/dhclient3"
- [ 9.810211] type=1505 audit(1298424429.971:6): operation="profile_replace" pid=557 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 9.810513] type=1505 audit(1298424429.971:7): operation="profile_replace" pid=557 name="/usr/lib/connman/scripts/dhclient-script"
- [ 9.811341] type=1505 audit(1298424429.971:8): operation="profile_replace" pid=584 name="/sbin/dhclient3"
- [ 9.811896] type=1505 audit(1298424429.971:9): operation="profile_replace" pid=584 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 9.812219] type=1505 audit(1298424429.971:10): operation="profile_replace" pid=584 name="/usr/lib/connman/scripts/dhclient-script"
- [ 10.010557] Console: switching to colour frame buffer device 80x30
- [ 10.578126] SB-XFi 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 10.582065] alloc irq_desc for 22 on node -1
- [ 10.582067] alloc kstat_irqs on node -1
- [ 10.582072] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 10.582093] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 10.639581] usbcore: registered new interface driver snd-usb-audio
- [ 11.531102] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
- [ 12.447853] r8169: eth0: link up
- [ 12.447859] r8169: eth0: link up
- [ 14.595187] type=1505 audit(1298424434.754:11): operation="profile_replace" pid=1020 name="/sbin/dhclient3"
- [ 14.822124] __ratelimit: 15 callbacks suppressed
- [ 14.822127] type=1505 audit(1298424434.983:17): operation="profile_load" pid=1024 name="/usr/sbin/mysqld-akonadi"
- [ 14.844239] type=1505 audit(1298424435.003:18): operation="profile_load" pid=1025 name="/usr/sbin/tcpdump"
- [ 14.986836] type=1505 audit(1298424435.148:19): operation="profile_load" pid=1021 name="/usr/bin/evince"
- [ 14.993830] type=1505 audit(1298424435.155:20): operation="profile_load" pid=1021 name="/usr/bin/evince-previewer"
- [ 14.998117] type=1505 audit(1298424435.159:21): operation="profile_load" pid=1021 name="/usr/bin/evince-thumbnailer"
- [ 16.157400] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
- [ 16.157403] apm: disabled - APM is not SMP safe.
- [ 23.236024] eth0: no IPv6 routers present
- [ 26.613130] CPU0 attaching NULL sched-domain.
- [ 26.613134] CPU1 attaching NULL sched-domain.
- [ 26.632583] CPU0 attaching sched-domain:
- [ 26.632586] domain 0: span 0-1 level MC
- [ 26.632589] groups: 0 1
- [ 26.632594] CPU1 attaching sched-domain:
- [ 26.632596] domain 0: span 0-1 level MC
- [ 26.632599] groups: 1 0
- [ 30.449962] CPU0 attaching NULL sched-domain.
- [ 30.449966] CPU1 attaching NULL sched-domain.
- [ 30.472074] CPU0 attaching sched-domain:
- [ 30.472077] domain 0: span 0-1 level MC
- [ 30.472080] groups: 0 1
- [ 30.472085] CPU1 attaching sched-domain:
- [ 30.472087] domain 0: span 0-1 level MC
- [ 30.472089] groups: 1 0
- [ 207.823691] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 207.823696] ata1: SError: { UnrecovData Handshk }
- [ 207.823699] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 207.823711] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 207.823712] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 207.823715] ata1.00: status: { DRDY ERR }
- [ 207.823722] ata1: hard resetting link
- [ 208.296047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 208.320209] ata1.00: configured for UDMA/100
- [ 208.320627] ata1: EH complete
- [ 265.824551] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 265.824556] ata1: SError: { RecovData UnrecovData Handshk }
- [ 265.824559] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
- [ 265.824571] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 265.824572] res 51/40:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 265.824575] ata1.00: status: { DRDY ERR }
- [ 265.824582] ata1: hard resetting link
- [ 266.300046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 266.324209] ata1.00: configured for UDMA/100
- [ 266.324629] ata1: EH complete
- [ 413.819671] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 413.819693] ata1: SError: { UnrecovData Handshk }
- [ 413.819701] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 413.819712] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 413.819714] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 413.819717] ata1.00: status: { DRDY ERR }
- [ 413.819724] ata1: hard resetting link
- [ 414.293229] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 414.316720] ata1.00: configured for UDMA/100
- [ 414.317150] ata1: EH complete
- [ 515.821793] ata1: limiting SATA link speed to 1.5 Gbps
- [ 515.821798] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 515.821802] ata1: SError: { UnrecovData Handshk }
- [ 515.821805] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 515.821817] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 515.821818] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 515.821821] ata1.00: status: { DRDY ERR }
- [ 515.821828] ata1: hard resetting link
- [ 516.296546] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 516.320218] ata1.00: configured for UDMA/100
- [ 516.320654] ata1: EH complete
- [ 571.661813] EXT4-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
- [ 571.687417] EXT4-fs (sdb2): mounted filesystem with ordered data mode
- [ 689.988533] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6 frozen
- [ 689.988538] ata1: SError: { RecovData UnrecovData Handshk }
- [ 689.988541] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 689.988553] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 689.988554] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 689.988557] ata1.00: status: { DRDY }
- [ 689.988565] ata1: hard resetting link
- [ 690.464549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 690.488715] ata1.00: configured for UDMA/100
- [ 690.489157] ata1: EH complete
- [ 714.823388] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 714.823393] ata1: SError: { UnrecovData Handshk }
- [ 714.823396] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 714.823408] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 714.823409] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 714.823412] ata1.00: status: { DRDY ERR }
- [ 714.823421] ata1: hard resetting link
- [ 715.296052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 715.320712] ata1.00: configured for UDMA/100
- [ 715.321130] ata1: EH complete
- [ 720.000313] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 720.000318] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 720.000330] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 720.000331] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
- [ 720.000334] ata1.00: status: { DRDY ERR }
- [ 720.000342] ata1: hard resetting link
- [ 720.476549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 720.500717] ata1.00: configured for UDMA/100
- [ 720.501149] ata1: EH complete
- [ 738.818274] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 738.818280] ata1: SError: { UnrecovData Handshk }
- [ 738.818283] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 738.818294] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 738.818295] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 738.818299] ata1.00: status: { DRDY ERR }
- [ 738.818306] ata1: hard resetting link
- [ 739.292050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 739.326714] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
- [ 739.326718] ata1.00: revalidation failed (errno=-5)
- [ 744.292518] ata1: hard resetting link
- [ 744.768050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 744.792211] ata1.00: configured for UDMA/100
- [ 744.792808] ata1: EH complete
- [ 822.992636] ata1.00: limiting speed to UDMA/66:PIO4
- [ 822.992641] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
- [ 822.992646] ata1: SError: { UnrecovData Handshk }
- [ 822.992649] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 822.992661] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 822.992662] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 822.992665] ata1.00: status: { DRDY }
- [ 822.992673] ata1: hard resetting link
- [ 823.468050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 823.492725] ata1.00: configured for UDMA/66
- [ 823.493151] ata1: EH complete
- [ 832.820151] ata1.00: qc timeout (cmd 0xa0)
- [ 832.820160] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
- [ 832.820165] ata1: SError: { UnrecovData Handshk }
- [ 832.820168] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 832.820180] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 832.820181] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 832.820184] ata1.00: status: { DRDY ERR }
- [ 832.820192] ata1: hard resetting link
- [ 833.296050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 833.320716] ata1.00: configured for UDMA/66
- [ 833.321290] ata1: EH complete
- [ 883.996136] ata1.00: limiting speed to UDMA/33:PIO4
- [ 883.996141] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6 frozen
- [ 883.996146] ata1: SError: { RecovData UnrecovData Handshk }
- [ 883.996149] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 883.996160] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 883.996161] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 883.996164] ata1.00: status: { DRDY }
- [ 883.996172] ata1: hard resetting link
- [ 884.472129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 884.496716] ata1.00: configured for UDMA/33
- [ 884.497161] ata1: EH complete
- [ 884.502642] ata1.00: limiting speed to PIO4
- [ 884.502646] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 884.502650] ata1: SError: { UnrecovData Handshk }
- [ 884.502653] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 884.502664] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 884.502666] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 884.502669] ata1.00: status: { DRDY ERR }
- [ 884.502676] ata1: hard resetting link
- [ 884.976048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 885.000233] ata1.00: configured for PIO4
- [ 885.001560] ata1: EH complete
- [ 885.002313] ata1.00: limiting speed to PIO3
- [ 885.002317] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x800100 action 0x6
- [ 885.002322] ata1: SError: { UnrecovData LinkSeq }
- [ 885.002325] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 885.002336] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 885.002338] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 885.002341] ata1.00: status: { DRDY ERR }
- [ 885.002348] ata1: hard resetting link
- [ 885.476059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 885.500717] ata1.00: configured for PIO3
- [ 885.501146] ata1: EH complete
- [ 891.820239] ata1.00: limiting speed to PIO0
- [ 891.820244] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 891.820249] ata1: SError: { UnrecovData Handshk }
- [ 891.820251] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 891.820263] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 891.820264] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 891.820267] ata1.00: status: { DRDY ERR }
- [ 891.820274] ata1: hard resetting link
- [ 892.296549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 892.320720] ata1.00: configured for PIO0
- [ 892.321129] ata1: EH complete
- [ 905.819272] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 905.819278] ata1: SError: { RecovData UnrecovData Handshk }
- [ 905.819281] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 905.819292] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 905.819294] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 905.819297] ata1.00: status: { DRDY ERR }
- [ 905.819304] ata1: hard resetting link
- [ 906.292375] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 906.316212] ata1.00: configured for PIO0
- [ 906.316630] ata1: EH complete
- [ 908.820062] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 908.820067] ata1: SError: { UnrecovData Handshk }
- [ 908.820070] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
- [ 908.820082] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 908.820083] res 51/40:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 908.820087] ata1.00: status: { DRDY ERR }
- [ 908.820094] ata1: hard resetting link
- [ 909.296556] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 909.320583] ata1.00: configured for PIO0
- [ 909.321016] ata1: EH complete
- [ 925.818800] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 925.818805] ata1: SError: { RecovData UnrecovData Handshk }
- [ 925.818808] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 925.818820] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 925.818821] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 925.818824] ata1.00: status: { DRDY ERR }
- [ 925.818832] ata1: hard resetting link
- [ 926.292494] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 926.316216] ata1.00: configured for PIO0
- [ 926.316643] ata1: EH complete
- [ 943.818029] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 943.818035] ata1: SError: { RecovData UnrecovData Handshk }
- [ 943.818038] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 943.818050] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 943.818051] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 943.818054] ata1.00: status: { DRDY ERR }
- [ 943.818061] ata1: hard resetting link
- [ 944.292550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 944.316716] ata1.00: configured for PIO0
- [ 944.317139] ata1: EH complete
- [ 948.820015] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 948.820020] ata1: SError: { UnrecovData Handshk }
- [ 948.820023] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
- [ 948.820035] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 948.820036] res 51/40:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 948.820040] ata1.00: status: { DRDY ERR }
- [ 948.820047] ata1: hard resetting link
- [ 949.296051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 949.320214] ata1.00: configured for PIO0
- [ 949.320658] ata1: EH complete
- [ 963.816972] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 963.816978] ata1: SError: { UnrecovData Handshk }
- [ 963.816981] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 963.816993] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 963.816994] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 963.816997] ata1.00: status: { DRDY ERR }
- [ 963.817005] ata1: hard resetting link
- [ 964.292550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 964.316713] ata1.00: configured for PIO0
- [ 964.317153] ata1: EH complete
- [ 964.318856] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 964.318860] ata1: SError: { UnrecovData Handshk }
- [ 964.318863] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 964.318874] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 964.318876] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 964.318879] ata1.00: status: { DRDY ERR }
- [ 964.318886] ata1: hard resetting link
- [ 964.792050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 964.816506] ata1.00: configured for PIO0
- [ 964.816929] ata1: EH complete
- [ 965.818650] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0xc00101 action 0x6
- [ 965.818656] ata1: SError: { RecovData UnrecovData Handshk LinkSeq }
- [ 965.818659] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 965.818670] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 965.818672] res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 965.818675] ata1.00: status: { DRDY ERR }
- [ 965.818682] ata1: hard resetting link
- [ 966.292551] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 966.316712] ata1.00: configured for PIO0
- [ 966.317147] ata1: EH complete
- [ 967.819162] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 967.819168] ata1: SError: { UnrecovData Handshk }
- [ 967.819171] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 967.819183] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 967.819184] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 967.819187] ata1.00: status: { DRDY ERR }
- [ 967.819194] ata1: hard resetting link
- [ 968.292050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 968.316212] ata1.00: configured for PIO0
- [ 968.316622] ata1: EH complete
- [ 995.818408] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 995.818413] ata1: SError: { UnrecovData Handshk }
- [ 995.818416] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 995.818428] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 995.818429] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 995.818432] ata1.00: status: { DRDY ERR }
- [ 995.818439] ata1: hard resetting link
- [ 996.292050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 996.316214] ata1.00: configured for PIO0
- [ 996.316646] ata1: EH complete
- [ 1002.818122] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 1002.818127] ata1: SError: { RecovData UnrecovData Handshk }
- [ 1002.818129] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1002.818138] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1002.818139] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1002.818141] ata1.00: status: { DRDY ERR }
- [ 1002.818147] ata1: hard resetting link
- [ 1003.296051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1003.320244] ata1.00: configured for PIO0
- [ 1003.320677] ata1: EH complete
- [ 1010.889206] ata1: drained 32768 bytes to clear DRQ.
- [ 1010.920540] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0xc00101 action 0x6 frozen
- [ 1010.920544] ata1: SError: { RecovData UnrecovData Handshk LinkSeq }
- [ 1010.920546] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1010.920555] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1010.920556] res 58/00:01:00:0c:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
- [ 1010.920558] ata1.00: status: { DRDY DRQ }
- [ 1010.920593] ata1: hard resetting link
- [ 1011.396546] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1011.420211] ata1.00: configured for PIO0
- [ 1011.420642] ata1: EH complete
- [ 1013.820479] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1013.820485] ata1: SError: { UnrecovData Handshk }
- [ 1013.820487] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1013.820499] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1013.820500] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1013.820510] ata1.00: status: { DRDY ERR }
- [ 1013.820517] ata1: hard resetting link
- [ 1014.296048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1014.320214] ata1.00: configured for PIO0
- [ 1014.320634] ata1: EH complete
- [ 1018.817628] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1018.817634] ata1: SError: { UnrecovData Handshk }
- [ 1018.817637] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1018.817648] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1018.817650] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1018.817653] ata1.00: status: { DRDY ERR }
- [ 1018.817660] ata1: hard resetting link
- [ 1019.292550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1019.316715] ata1.00: configured for PIO0
- [ 1019.317134] ata1: EH complete
- [ 1053.988537] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x800000 action 0x6 frozen
- [ 1053.988543] ata1: SError: { LinkSeq }
- [ 1053.988546] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1053.988558] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1053.988559] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
- [ 1053.988562] ata1.00: status: { DRDY }
- [ 1053.988569] ata1: hard resetting link
- [ 1054.464550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1054.488715] ata1.00: configured for PIO0
- [ 1054.489163] ata1: EH complete
- [ 1062.816624] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1062.816629] ata1: SError: { UnrecovData Handshk }
- [ 1062.816632] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1062.816644] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1062.816645] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1062.816648] ata1.00: status: { DRDY ERR }
- [ 1062.816656] ata1: hard resetting link
- [ 1063.292551] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1063.316718] ata1.00: configured for PIO0
- [ 1063.317156] ata1: EH complete
- [ 1067.000305] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 1067.000310] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1067.000323] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1067.000324] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
- [ 1067.000327] ata1.00: status: { DRDY ERR }
- [ 1067.000336] ata1: hard resetting link
- [ 1067.476548] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1067.500714] ata1.00: configured for PIO0
- [ 1067.501152] ata1: EH complete
- [ 1071.815913] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1071.815918] ata1: SError: { UnrecovData Handshk }
- [ 1071.815921] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1071.815932] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1071.815934] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1071.815937] ata1.00: status: { DRDY ERR }
- [ 1071.815945] ata1: hard resetting link
- [ 1072.288050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1072.312214] ata1.00: configured for PIO0
- [ 1072.312668] ata1: EH complete
- [ 1085.812633] ata1.00: qc timeout (cmd 0xa0)
- [ 1085.812645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 1085.812650] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1085.812662] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1085.812663] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
- [ 1085.812666] ata1.00: status: { DRDY ERR }
- [ 1085.812674] ata1: hard resetting link
- [ 1086.288048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1086.312213] ata1.00: configured for PIO0
- [ 1086.312654] ata1: EH complete
- [ 1102.822583] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 1102.822589] ata1: SError: { RecovData UnrecovData Handshk }
- [ 1102.822592] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1102.822603] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1102.822604] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1102.822607] ata1.00: status: { DRDY ERR }
- [ 1102.822615] ata1: hard resetting link
- [ 1103.296051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1103.320213] ata1.00: configured for PIO0
- [ 1103.320630] ata1: EH complete
- [ 1126.824547] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400001 action 0x0
- [ 1126.824552] ata1: SError: { RecovData Handshk }
- [ 1126.824555] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1126.824567] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1126.824568] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
- [ 1126.824571] ata1.00: status: { DRDY ERR }
- [ 1142.821383] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0xc00101 action 0x6
- [ 1142.821389] ata1: SError: { RecovData UnrecovData Handshk LinkSeq }
- [ 1142.821392] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1142.821404] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1142.821405] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1142.821408] ata1.00: status: { DRDY ERR }
- [ 1142.821416] ata1: hard resetting link
- [ 1143.296550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1143.320712] ata1.00: configured for PIO0
- [ 1143.321144] ata1: EH complete
- [ 1144.819679] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 1144.819684] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1144.819695] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1144.819696] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
- [ 1144.819700] ata1.00: status: { DRDY ERR }
- [ 1144.820516] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x800100 action 0x6
- [ 1144.820521] ata1: SError: { UnrecovData LinkSeq }
- [ 1144.820524] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1144.820537] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1144.820538] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1144.820542] ata1.00: status: { DRDY ERR }
- [ 1144.820549] ata1: hard resetting link
- [ 1145.296549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1145.320714] ata1.00: configured for PIO0
- [ 1145.321160] ata1: EH complete
- [ 1151.824129] ata1.00: qc timeout (cmd 0xa0)
- [ 1151.824141] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
- [ 1151.824146] ata1: SError: { UnrecovData Handshk }
- [ 1151.824149] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1151.824160] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1151.824162] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 1151.824165] ata1.00: status: { DRDY ERR }
- [ 1151.824172] ata1: hard resetting link
- [ 1152.300050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1152.324223] ata1.00: configured for PIO0
- [ 1152.324663] ata1: EH complete
- [ 1152.336916] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
- [ 1152.336928] sr: Sense Key : Hardware Error [current]
- [ 1152.336933] sr: Add. Sense: Logical unit communication CRC error (Ultra-DMA/32)
- [ 1162.818702] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0xc00101 action 0x6
- [ 1162.818708] ata1: SError: { RecovData UnrecovData Handshk LinkSeq }
- [ 1162.818711] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1162.818723] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1162.818724] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1162.818727] ata1.00: status: { DRDY ERR }
- [ 1162.818735] ata1: hard resetting link
- [ 1163.292049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1163.317576] ata1.00: configured for PIO0
- [ 1163.318000] ata1: EH complete
- [ 1164.824547] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x800000 action 0x0
- [ 1164.824552] ata1: SError: { LinkSeq }
- [ 1164.824555] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1164.824566] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1164.824568] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
- [ 1164.824571] ata1.00: status: { DRDY ERR }
- [ 1166.819583] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0xc00100 action 0x6
- [ 1166.819589] ata1: SError: { UnrecovData Handshk LinkSeq }
- [ 1166.819592] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1166.819603] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1166.819605] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1166.819608] ata1.00: status: { DRDY ERR }
- [ 1166.819615] ata1: hard resetting link
- [ 1167.292048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1167.316715] ata1.00: configured for PIO0
- [ 1167.317151] ata1: EH complete
- [ 1206.820220] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x6
- [ 1206.820226] ata1: SError: { RecovData UnrecovData Handshk }
- [ 1206.820229] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1206.820240] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1206.820241] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1206.820244] ata1.00: status: { DRDY ERR }
- [ 1206.820252] ata1: hard resetting link
- [ 1207.296051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1207.320330] ata1.00: configured for PIO0
- [ 1207.320750] ata1: EH complete
- [ 1232.818416] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1232.818422] ata1: SError: { UnrecovData Handshk }
- [ 1232.818425] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1232.818437] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1232.818438] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1232.818441] ata1.00: status: { DRDY ERR }
- [ 1232.818448] ata1: hard resetting link
- [ 1233.292054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1233.316213] ata1.00: configured for PIO0
- [ 1233.316640] ata1: EH complete
- [ 1264.988656] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
- [ 1264.988662] ata1: SError: { UnrecovData Handshk }
- [ 1264.988665] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1264.988677] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1264.988678] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x14 (ATA bus error)
- [ 1264.988681] ata1.00: status: { DRDY }
- [ 1264.988688] ata1: hard resetting link
- [ 1265.464562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1265.488713] ata1.00: configured for PIO0
- [ 1265.489142] ata1: EH complete
- [ 1265.496586] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1265.496591] ata1: SError: { UnrecovData Handshk }
- [ 1265.496594] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1265.496605] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1265.496607] res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1265.496610] ata1.00: status: { DRDY ERR }
- [ 1265.496617] ata1: hard resetting link
- [ 1265.972050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1265.996537] ata1.00: configured for PIO0
- [ 1265.996983] ata1: EH complete
- [ 1269.824203] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1269.824209] ata1: SError: { UnrecovData Handshk }
- [ 1269.824212] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
- [ 1269.824223] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1269.824225] res 51/40:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1269.824228] ata1.00: status: { DRDY ERR }
- [ 1269.824235] ata1: hard resetting link
- [ 1270.300050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1270.324213] ata1.00: configured for PIO0
- [ 1270.324638] ata1: EH complete
- [ 1277.818024] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6
- [ 1277.818030] ata1: SError: { UnrecovData Handshk }
- [ 1277.818032] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
- [ 1277.818044] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
- [ 1277.818045] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
- [ 1277.818048] ata1.00: status: { DRDY ERR }
- [ 1277.818055] ata1: hard resetting link
- [ 1278.292184] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1278.316713] ata1.00: configured for PIO0
- [ 1283.316138] ata1.00: qc timeout (cmd 0xa0)
- [ 1283.316144] ata1.00: TEST_UNIT_READY failed (err_mask=0x4)
- [ 1283.316152] ata1: hard resetting link
- [ 1283.792551] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1283.811218] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
- [ 1283.811222] ata1.00: revalidation failed (errno=-5)
- [ 1288.792018] ata1: hard resetting link
- [ 1289.268550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1289.303214] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
- [ 1289.303218] ata1.00: revalidation failed (errno=-5)
- [ 1289.303222] ata1.00: disabled
- [ 1289.303237] ata1: exception Emask 0x42 SAct 0x0 SErr 0xc00 action 0x6 frozen t4
- [ 1289.303240] ata1: SError: { Proto HostInt }
- [ 1289.303247] ata1: hard resetting link
- [ 1289.776549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 1289.776568] ata1: EH complete
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement