Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BusyBox v1.19.4 (2013-07-20 10:17:27 CEST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Bleeding Edge, r36114)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@OpenWrt:/# dmesg
- [ 0.000000] Linux version 3.7.10 (berto@debian) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Sat Jul 20 13:03:32 CEST 2013
- [ 0.000000] Detected Broadcom 0x6358 CPU revision a1
- [ 0.000000] CPU frequency is 300 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] registering 40 GPIOs
- [ 0.000000] board_bcm963xx: Boot address 0xbe000000
- [ 0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
- [ 0.000000] bcm63xx_nvram: nvram checksum invalid (expected 33313330, actual 80bb1805)
- [ 0.000000] No bcm_tag found!
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
- [ 0.000000] board_bcm963xx: board name: HW556_A
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 8029bd60, node_mem_map 81000000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
- [ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 61656k/65536k available (2261k kernel code, 3880k reserved, 424k data, 256k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.036000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
- [ 0.036000] pid_max: default: 32768 minimum: 301
- [ 0.040000] Mount-cache hash table entries: 512
- [ 0.048000] NET: Registered protocol family 16
- [ 0.064000] registering PCI controller with io_map_base unset
- [ 0.084000] bio: create slab <bio-0> at 0
- [ 0.092000] PCI host bridge to bus 0000:00
- [ 0.096000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.100000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.104000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.108000] pci 0000:00:01.0: [1814:3592] type 00 class 0x028000
- [ 0.108000] pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
- [ 0.120000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.120000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
- [ 0.124000] Switching to clocksource MIPS
- [ 0.136000] NET: Registered protocol family 2
- [ 0.144000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.152000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.156000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.164000] TCP: reno registered
- [ 0.168000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.172000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.180000] NET: Registered protocol family 1
- [ 0.184000] PCI: CLS 0 bytes, default 16
- [ 0.188000] audit: initializing netlink socket (disabled)
- [ 0.196000] type=2000 audit(0.195:1): initialized
- [ 0.200000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.208000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.220000] msgmni has been set to 120
- [ 0.224000] io scheduler noop registered
- [ 0.228000] io scheduler deadline registered (default)
- [ 0.236000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
- [ 0.244000] console [ttyS0] enabled, bootconsole disabled
- [ 0.260000] physmap platform flash device: 02000000 at 1e000000
- [ 0.268000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
- [ 0.276000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
- [ 0.276000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.284000] Amd/Fujitsu Extended Query version 1.3.
- [ 0.288000] number of CFI chips: 1
- [ 0.292000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
- [ 0.300000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
- [ 0.304000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
- [ 0.312000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length dc0000
- [ 0.320000] bcm63xxpart: Partition 3 is cal_data offset ee0000 and length 20000
- [ 0.328000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
- [ 0.336000] bcm63xxpart: Partition 5 is linux offset 20000 and length ec0000
- [ 0.344000] bcm63xxpart: Spare partition is offset 680004 and length 85fffc
- [ 0.352000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
- [ 0.356000] Creating 6 MTD partitions on "physmap-flash.0":
- [ 0.364000] 0x000000000000-0x000000020000 : "CFE"
- [ 0.372000] 0x000000020100-0x000000120000 : "kernel"
- [ 0.376000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.392000] 0x000000120000-0x000000ee0000 : "rootfs"
- [ 0.404000] mtd: partition "rootfs" set to be root filesystem
- [ 0.408000] mtd: partition "rootfs_data" created automatically, ofs=680000, len=860000
- [ 0.416000] 0x000000680000-0x000000ee0000 : "rootfs_data"
- [ 0.428000] 0x000000ee0000-0x000000f00000 : "cal_data"
- [ 0.436000] 0x000000fe0000-0x000001000000 : "nvram"
- [ 0.444000] 0x000000020000-0x000000ee0000 : "linux"
- [ 0.456000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542) v0.1.2
- [ 0.476000] libphy: bcm63xx_enet MII bus: probed
- [ 0.484000] b53_common: found switch: BCM5325, rev 0
- [ 0.488000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom B53 (1)]
- [ 0.504000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.512000] Registered led device: HW556:red:message
- [ 0.512000] Registered led device: HW556:red:hspa
- [ 0.512000] Registered led device: HW556:red:dsl
- [ 0.512000] Registered led device: HW556:red:power
- [ 0.512000] Registered led device: HW556:red:all
- [ 0.516000] TCP: cubic registered
- [ 0.520000] NET: Registered protocol family 17
- [ 0.524000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.544000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.552000] Freeing unused kernel memory: 256k freed
- [ 4.016000] Button Hotplug driver version 0.4.1
- [ 4.236000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
- [ 5.564000] eth0: link UP - 100/full - flow control off
- [ 7.924000] jffs2: notice: (346) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
- [ 9.412000] SCSI subsystem initialized
- [ 9.756000] usbcore: registered new interface driver usbfs
- [ 9.764000] usbcore: registered new interface driver hub
- [ 9.772000] usbcore: registered new device driver usb
- [ 10.552000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 10.664000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
- [ 10.668000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
- [ 10.704000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
- [ 10.720000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
- [ 10.728000] hub 1-0:1.0: USB hub found
- [ 10.732000] hub 1-0:1.0: 2 ports detected
- [ 10.944000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 11.052000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
- [ 11.056000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
- [ 11.064000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
- [ 11.132000] hub 2-0:1.0: USB hub found
- [ 11.136000] hub 2-0:1.0: 1 port detected
- [ 11.148000] usb 1-2: new high-speed USB device number 2 using bcm63xx_ehci
- [ 11.264000] uhci_hcd: USB Universal Host Controller Interface driver
- [ 11.296000] Initializing USB Mass Storage driver...
- [ 11.304000] usbcore: registered new interface driver usb-storage
- [ 11.308000] USB Mass Storage support registered.
- [ 11.592000] hub 1-2:1.0: USB hub found
- [ 11.596000] hub 1-2:1.0: 4 ports detected
- [ 32.804000] eth0: link DOWN
- [ 33.916000] Compat-drivers backport release: compat-drivers-2013-01-21-1
- [ 33.924000] Backport based on wireless-testing.git master-2013-02-22
- [ 33.928000] compat.git: wireless-testing.git
- [ 34.128000] cfg80211: Calling CRDA to update world regulatory domain
- [ 34.136000] cfg80211: World regulatory domain updated:
- [ 34.140000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 34.148000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 34.156000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 34.164000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 34.172000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 34.180000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 35.772000] usbcore: registered new interface driver rt2500usb
- [ 36.040000] usbcore: registered new interface driver rt73usb
- [ 36.088000] usbcore: registered new interface driver rtl8187
- [ 36.132000] usbcore: registered new interface driver rt2800usb
- [ 36.688000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 37.404000] PPP generic driver version 2.4.2
- [ 37.628000] usbcore: registered new interface driver p54usb
- [ 38.172000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 38.608000] NET: Registered protocol family 24
- [ 38.804000] nf_conntrack version 0.5.0 (967 buckets, 3868 max)
- [ 40.496000] xt_time: kernel timezone is -0000
- [ 41.064000] usbcore: registered new interface driver ath9k_htc
- [ 41.336000] fuse init (API version 7.20)
- [ 46.784000] eth0: link UP - 100/full - flow control off
- [ 48.708000] device eth0.1 entered promiscuous mode
- [ 48.716000] device eth0 entered promiscuous mode
- [ 48.732000] br-lan: port 1(eth0.1) entered forwarding state
- [ 48.736000] br-lan: port 1(eth0.1) entered forwarding state
- [ 48.928000] eth0: link UP - 100/full - flow control off
- [ 50.740000] br-lan: port 1(eth0.1) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement