SHARE
TWEET

Untitled

a guest Sep 19th, 2019 629 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # dmesg
  2. [    0.000000] Booting Linux on physical CPU 0
  3. [    0.000000] Linux version 3.4.113 (root@1058e7ceca8f) (gcc version 4.9.3 (Buildroot 2016.05-git-gaf97a9710) ) #1 SMP PREEMPT Sat Jun 15 06:38:31 UTC 2019
  4. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  5. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [    0.000000] Machine: sun8i
  7. [    0.000000] cma: dma_declare_contiguous(278): ION reserve area(0x46c00000~0x50400000) exceed phys memory! adjust size to 148MBytes
  8. [    0.000000] cma: CMA: reserved 148 MiB at 46c00000
  9. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  10. [    0.000000] On node 0 totalpages: 65536
  11. [    0.000000] free_area_init_node: node 0, pgdat c06c1c40, node_mem_map c0808000
  12. [    0.000000]   Normal zone: 576 pages used for memmap
  13. [    0.000000]   Normal zone: 0 pages reserved
  14. [    0.000000]   Normal zone: 64960 pages, LIFO batch:15
  15. [    0.000000] script_init enter!
  16. [    0.000000] script_init exit!
  17. [    0.000000] PERCPU: Embedded 7 pages/cpu @c0a5c000 s6592 r8192 d13888 u32768
  18. [    0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
  19. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
  21. [    0.000000] Kernel command line: boot_type=0 disp_para=100 fb_base=0x0 config_size=42220 boot.serialno=282789088046ffffc566 boot.hardware=sun8i console=ttyS0,115200 noinitrd root=/dev/nandd rootfstype=ext4 rootwait init=/sbin/init ion_cma_512m=150m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=0 partitions=boot-res@nanda:env@nandb:boot@nandc:rootfs@nandd:rootfs_data@nande:misc@nandf:UDISK@nandg
  22. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  23. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  25. [    0.000000] Memory: 256MB = 256MB total
  26. [    0.000000] Memory: 99292k/99292k available, 162852k reserved, 0K highmem
  27. [    0.000000] Virtual kernel memory layout:
  28. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  29. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  30. [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
  31. [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  32. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  33. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  34. [    0.000000]       .text : 0xc0008000 - 0xc062ba08   (6287 kB)
  35. [    0.000000]       .init : 0xc062c000 - 0xc065d9c0   ( 199 kB)
  36. [    0.000000]       .data : 0xc065e000 - 0xc06c2a40   ( 403 kB)
  37. [    0.000000]        .bss : 0xc06c4098 - 0xc08070b8   (1293 kB)
  38. [    0.000000] Preemptible hierarchical RCU implementation.
  39. [    0.000000] NR_IRQS:416
  40. [    0.000000] try to syncboot of clk ats
  41. [    0.000000] try to syncboot of clk usbphy0
  42. [    0.000000] try to syncboot of clk sdmmc2mod
  43. [    0.000000] try to syncboot of clk uart0
  44. [    0.000000] try to syncboot of clk pll_ddr1
  45. [    0.000000] try to syncboot of clk debe0
  46. [    0.000000] try to syncboot of clk nand
  47. [    0.000000] try to syncboot of clk dma
  48. [    0.000000] try to syncboot of clk sat
  49. [    0.000000] try to syncboot of clk usbotg
  50. [    0.000000] try to syncboot of clk pio
  51. [    0.000000] try to syncboot of clk mbus
  52. [    0.000000] try to syncboot of clk drc0
  53. [    0.000000] try to syncboot of clk lcd0ch0
  54. [    0.000000] try to syncboot of clk axi
  55. [    0.000000] Architected local timer running at 24.00MHz.
  56. [    0.000000] Switching to timer-based delay loop
  57. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  58. [    0.000000] Console: colour dummy device 80x30
  59. [    0.000183] Calibrating delay loop (skipped), value calculated using timer frequency.. 14405.00 BogoMIPS (lpj=24000000)
  60. [    0.000202] pid_max: default: 4096 minimum: 301
  61. [    0.000353] Security Framework initialized
  62. [    0.000375] SELinux:  Initializing.
  63. [    0.000420] SELinux:  Starting in permissive mode
  64. [    0.000431] AppArmor: AppArmor disabled by boot time parameter
  65. [    0.000505] Mount-cache hash table entries: 512
  66. [    0.001238] CPU: Testing write buffer coherency: ok
  67. [    0.001438] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  68. [    0.001450] [sunxi_smp_prepare_cpus] enter
  69. [    0.001485] Setting up static identity map for 0x404e8e28 - 0x404e8e80
  70. [    0.003333] CPU1: Booted secondary processor
  71. [    0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  72. [    0.003333] CPU2: Booted secondary processor
  73. [    0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  74. [    0.003333] CPU3: Booted secondary processor
  75. [    0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  76. [    0.043483] Brought up 4 CPUs
  77. [    0.043483] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
  78. [    0.046921] devtmpfs: initialized
  79. [    0.051966] pinctrl core: initialized pinctrl subsystem
  80. [    0.051966] dummy:
  81. [    0.057516] NET: Registered protocol family 16
  82. [    0.065830] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  83. [    0.065902] script_sysfs_init success
  84. [    0.065931] sunxi_dump_init success
  85. [    0.066166] sunxi pinctrl probe enter
  86. [    0.066899] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  87. [    0.068033] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  88. [    0.068218] axp_pinctrl_probe enter...
  89. [    0.068372] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
  90. [    0.068389] mainkey total count : 79
  91. [    0.068398] mainkey name : product, pin count : 0
  92. [    0.068406] mainkey name : platform, pin count : 2
  93. [    0.068416] mainkey name : target, pin count : 0
  94. [    0.068425] mainkey name : power_sply, pin count : 0
  95. [    0.068434] mainkey name : key_detect_en, pin count : 0
  96. [    0.068443] mainkey name : fel_key, pin count : 1
  97. [    0.068452] mainkey name : gpiokey_para, pin count : 2
  98. [    0.068462] mainkey name : card_boot, pin count : 0
  99. [    0.068471] mainkey name : card0_boot_para, pin count : 6
  100. [    0.068482] mainkey name : card2_boot_para, pin count : 10
  101. [    0.068494] mainkey name : twi_para, pin count : 2
  102. [    0.068504] mainkey name : uart_para, pin count : 2
  103. [    0.068515] mainkey name : force_uart_para, pin count : 2
  104. [    0.068524] mainkey name : jtag_para, pin count : 4
  105. [    0.068534] mainkey name : clock, pin count : 0
  106. [    0.068543] mainkey name : pm_para, pin count : 0
  107. [    0.068553] mainkey name : dram_para, pin count : 0
  108. [    0.068562] mainkey name : pm_para, pin count : 0
  109. [    0.068571] mainkey name : wakeup_src_para, pin count : 1
  110. [    0.068580] mainkey name : twi0, pin count : 2
  111. [    0.068589] mainkey name : twi1, pin count : 2
  112. [    0.068598] mainkey name : twi2, pin count : 2
  113. [    0.068607] mainkey name : uart0, pin count : 2
  114. [    0.068616] mainkey name : uart1, pin count : 4
  115. [    0.068626] mainkey name : uart2, pin count : 2
  116. [    0.068635] mainkey name : uart3, pin count : 4
  117. [    0.068644] mainkey name : uart4, pin count : 4
  118. [    0.068653] mainkey name : spi0, pin count : 4
  119. [    0.068662] mainkey name : spi1, pin count : 4
  120. [    0.068672] mainkey name : spi_devices, pin count : 0
  121. [    0.068681] mainkey name : spi_board0, pin count : 0
  122. [    0.068690] mainkey name : ctp_para, pin count : 2
  123. [    0.068699] mainkey name : ctp_list_para, pin count : 0
  124. [    0.068709] mainkey name : tkey_para, pin count : 0
  125. [    0.068718] mainkey name : motor_para, pin count : 1
  126. [    0.068728] map mainkey [motor_para] to pinctrl, map number [2]
  127. [    0.068739] mainkey name : ths_para, pin count : 0
  128. [    0.068748] mainkey name : cooler_table, pin count : 0
  129. [    0.068758] mainkey name : nand0_para, pin count : 19
  130. [    0.068769] mainkey name : hdmi_ep952_para, pin count : 2
  131. [    0.068779] mainkey name : disp_init, pin count : 0
  132. [    0.068788] mainkey name : lcd0_para, pin count : 29
  133. [    0.068800] mainkey name : pwm0_para, pin count : 1
  134. [    0.068811] mainkey name : pwm1_para, pin count : 1
  135. [    0.068821] mainkey name : csi0, pin count : 16
  136. [    0.068833] mainkey name : led_para, pin count : 2
  137. [    0.068843] mainkey name : mmc0_para, pin count : 7
  138. [    0.068854] mainkey name : mmc1_para, pin count : 6
  139. [    0.068864] mainkey name : mmc2_para, pin count : 11
  140. [    0.068875] mainkey name : usbc0, pin count : 3
  141. [    0.068884] map mainkey [usbc0] to pinctrl, map number [2]
  142. [    0.068894] mainkey name : usbc1, pin count : 0
  143. [    0.068903] mainkey name : usb_feature, pin count : 0
  144. [    0.068913] mainkey name : msc_feature, pin count : 0
  145. [    0.068922] mainkey name : gsensor_para, pin count : 1
  146. [    0.068932] mainkey name : gsensor_list_para, pin count : 0
  147. [    0.068942] mainkey name : rf_para, pin count : 0
  148. [    0.068951] mainkey name : wifi_para, pin count : 2
  149. [    0.068961] mainkey name : bt_para, pin count : 3
  150. [    0.068971] mainkey name : gps_para, pin count : 2
  151. [    0.068980] mainkey name : 3g_para, pin count : 4
  152. [    0.068990] mainkey name : gy_para, pin count : 0
  153. [    0.068999] mainkey name : gy_list_para, pin count : 0
  154. [    0.069009] mainkey name : ls_para, pin count : 1
  155. [    0.069019] mainkey name : ls_list_para, pin count : 0
  156. [    0.069028] mainkey name : compass_para, pin count : 0
  157. [    0.069038] mainkey name : i2s0, pin count : 3
  158. [    0.069047] mainkey name : i2s1, pin count : 4
  159. [    0.069057] mainkey name : audio0, pin count : 0
  160. [    0.069066] mainkey name : pmu1_para, pin count : 0
  161. [    0.069075] mainkey name : pmu2_para, pin count : 0
  162. [    0.069085] mainkey name : dvfs_table, pin count : 0
  163. [    0.069094] mainkey name : Vdevice, pin count : 2
  164. [    0.069104] mainkey name : s_uart0, pin count : 2
  165. [    0.069114] mainkey name : s_rsb0, pin count : 2
  166. [    0.069123] mainkey name : s_jtag0, pin count : 4
  167. [    0.069133] mainkey name : s_powchk, pin count : 0
  168. [    0.069143] mainkey name : mali_para, pin count : 0
  169. [    0.069152] mainkey name : dram_dvfs_table, pin count : 0
  170. [    0.069162] mainkey name : charging_type, pin count : 0
  171. [    0.069172] mainkey name : dram_scene_table, pin count : 0
  172. [    0.069180] axp pinctrl driver probe ok
  173. [    0.070116] sunxi_dev_init 453 gpio_buttons_data.nbuttons=2
  174. [    0.070131] sunxi_dev_init 479 gpio_buttons[i].gpio=359 gpio_buttons[i].code=116
  175. [    0.070145] sunxi_dev_init 479 gpio_buttons[i].gpio=356 gpio_buttons[i].code=102
  176. [    0.070449] [sunxi-module]: [sunxi-module.0] probe success
  177. [    0.070487] script config pll3 to 297 Mhz
  178. [    0.070500] script config pll4 to 300 Mhz
  179. [    0.070530] script config pll6 to 600 Mhz
  180. [    0.070542] script config pll8 to 384 Mhz
  181. [    0.070560] script config pll9 to 480 Mhz
  182. [    0.070573] script config pll10 to 297 Mhz
  183. [    0.070580] sunxi_default_clk_init
  184. [    0.070588] try to set pll6ahb1 to 200000000
  185. [    0.070637] try to set ahb clk source to pll6ahb1
  186. [    0.070646] set ahb clk source to pll6ahb1
  187. [    0.070656] try to set ahb1 to 200000000
  188. [    0.070666] try to set apb1 to 100000000
  189. [    0.076815] bio: create slab <bio-0> at 0
  190. [    0.080090] [ARISC] :sunxi-arisc driver v1.60
  191. [    0.113479] [ARISC] :arisc version: [v0.0.23.1]
  192. [    0.113491] [sunxi-module]: arisc register success
  193. [    0.328592] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
  194. [    0.330422] SCSI subsystem initialized
  195. [    0.330550] usbcore: registered new interface driver usbfs
  196. [    0.330618] usbcore: registered new interface driver hub
  197. [    0.333372] usbcore: registered new device driver usb
  198. [    0.333489] twi_chan_cfg()350 - [twi0] has no twi_regulator.
  199. [    0.333503] twi_chan_cfg()350 - [twi1] has no twi_regulator.
  200. [    0.333516] twi_chan_cfg()350 - [twi2] has no twi_regulator.
  201. [    0.334113] Linux video capture interface: v2.00
  202. [    0.333363] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
  203. [    0.336736] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
  204. [    0.336901] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
  205. [    0.336901] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
  206. [    0.336901] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
  207. [    0.336901] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
  208. [    0.336901] axp22_rtc: 3000 mV
  209. [    0.336901] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
  210. [    0.336901] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
  211. [    0.336901] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
  212. [    0.336901] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
  213. [    0.336901] axp22_dldo2: 700 <--> 3300 mV at 700 mV
  214. [    0.336901] axp22_dldo3: 700 <--> 3300 mV at 700 mV
  215. [    0.340070] axp22_dldo4: 700 <--> 3300 mV at 700 mV
  216. [    0.340210] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
  217. [    0.340210] axp22_eldo1: supplied by axp22_dcdc1
  218. [    0.340239] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
  219. [    0.340239] axp22_eldo2: supplied by axp22_dcdc1
  220. [    0.340243] axp22_eldo3: 700 <--> 3300 mV at 700 mV
  221. [    0.340243] axp22_eldo3: supplied by axp22_dcdc1
  222. [    0.340243] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
  223. [    0.340243] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
  224. [    0.340243] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
  225. [    0.340243] axp22_dc1sw: at 700 mV
  226. [    0.340243] axp22_dc1sw: supplied by axp22_dcdc1
  227. [    0.340372] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
  228. [    0.343861] now_rest_vol = 0
  229. [    0.343861] Advanced Linux Sound Architecture Driver Version 1.0.25.
  230. [    0.347305] Switching to clocksource arch_sys_counter
  231. [    0.347610] FS-Cache: Loaded
  232. [    0.347670] CacheFiles: Loaded
  233. [    0.347670] [DISP]disp_module_init
  234. [    0.347670] [DISP]disp_probe
  235. [    0.347670] disp_init_lcd==============
  236. [    0.347837] [DISP] OSAL_Pwm_request,line:12:    OSAL_Pwm_request pwm 1 fail!
  237. [    0.356730] lcd_clk_config111 ======lcd ddddclk = 74250000
  238. [    0.356740] lcd_clk_config222 ======lcd ddddclk = 74250000
  239. [    0.356751] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
  240. [    0.356762] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
  241. [    0.357135] [DISP] OSAL_Pwm_Set_Polarity,line:95:    OSAL_Pwm_Set_Polarity, handle is NULL!
  242. [    0.357150] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
  243. [    0.357279] start_work================111
  244. [    0.357295] [DISP]Fb_Init
  245. [    0.357364] [DISP] parser_disp_init_para,line:130:    fetch script data disp_init.screen2_output_type fail
  246. [    0.357380] [DISP] parser_disp_init_para,line:147:    fetch script data disp_init.screen2_output_mode fail
  247. [    0.357406] [DISP] parser_disp_init_para,line:208:    fetch script data disp_init.fb2_format fail
  248. [    0.357421] [DISP] parser_disp_init_para,line:213:    fetch script data disp_init.fb2_scaler_mode_enable fail
  249. [    0.357437] [DISP] parser_disp_init_para,line:218:    fetch script data disp_init.fb2_width fail
  250. [    0.357452] [DISP] parser_disp_init_para,line:223:    fetch script data disp_init.fb2_height fail
  251. [    0.366079] [DISP]disp_probe finish
  252. [    0.366159] [DISP]capture_module_init
  253. [    0.366460] [DISP]capture_probe
  254. [    0.366489] [DISP]capture finish
  255. [    0.366499] [DISP]disp_module_init finish
  256. [    0.366507] [LCD]lcd_module_init
  257. [    0.366660] LCD_set_panel_funs: ====
  258. [    0.366698] disp_lcd_get_driver_name, EP952
  259. [    0.366707] gdisp.init_para.start_process
  260. [    0.366727] start_work================111
  261. [    0.366735] extern hdmi type...
  262. [    0.366750] disp_lcd_get_driver_name, EP952
  263. [    0.366757] gdisp.init_para.start_process
  264. [    0.366771] start_work================111
  265. [    0.366778] extern hdmi type...
  266. [    0.366791] disp_lcd_get_driver_name, EP952
  267. [    0.366798] gdisp.init_para.start_process
  268. [    0.366811] start_work================111
  269. [    0.366818] extern hdmi type...
  270. [    0.366831] disp_lcd_get_driver_name, EP952
  271. [    0.366838] gdisp.init_para.start_process
  272. [    0.366851] start_work================111
  273. [    0.366858] extern hdmi type...
  274. [    0.366871] disp_lcd_get_driver_name, EP952
  275. [    0.366878] gdisp.init_para.start_process
  276. [    0.366891] start_work================111
  277. [    0.366898] extern hdmi type...
  278. [    0.366910] disp_lcd_get_driver_name, EP952
  279. [    0.366918] gdisp.init_para.start_process
  280. [    0.366931] start_work================111
  281. [    0.366938] extern hdmi type...
  282. [    0.366950] disp_lcd_get_driver_name, EP952
  283. [    0.366957] gdisp.init_para.start_process
  284. [    0.366970] start_work================111
  285. [    0.366978] extern hdmi type...
  286. [    0.366990] disp_lcd_get_driver_name, EP952
  287. [    0.366998] set ep952 lcd
  288. [    0.367004] gdisp.init_para.start_process
  289. [    0.367017] start_work================111
  290. [    0.367024] extern hdmi type...
  291. [    0.367036] [LCD]lcd_module_init finish
  292. [    0.367044] [HDMI]ep952_module_init begin
  293. [    0.367053] hdmi used.
  294. [    0.367062] hdmi i2c id = 0
  295. [    0.367108] hdmi_i2c_detect=============
  296. [    0.367116] hdmi_i2c_detect==111111===========
  297. [    0.367125] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=0, i2c adapter=c6525810
  298. [    0.367229] hdmi_i2c_probe:544
  299. [    0.367237] hdmi_i2c_probe:572
  300. [    0.367244] hdmi_parse_config:104
  301. [    0.367252] hdmi_parse_config:113
  302. [    0.367260] gpio get success!
  303. [    0.367267] hdmi_parse_config:113
  304. [    0.367274] gpio get success!
  305. [    0.367354] hdmi_parse_config:133
  306. [    0.367363] EP952 Code Version : 52.1
  307. [    0.367371] hdmi_gpio_config:141
  308. [    0.367379] hdmi_gpio_config: gpio_info->mul_sel = 1
  309. [    0.380030] hdmi_gpio_config:141
  310. [    0.380038] hdmi_gpio_config: gpio_info->mul_sel = 7
  311. [    0.396427] < EP952 Tx Power Down >
  312. [    0.403000] < EP952 Audio_Mute_enable >
  313. [    0.404653] < EP952 Video_Mute_enable >
  314. [    0.406301] User define - Disable HDCP function
  315. [    0.415948] gdisp.init_para.start_process
  316. [    0.415956] ep952_thread:303
  317. [    0.415974] start_work================111
  318. [    0.415981] extern hdmi type...
  319. [    0.415989] hdmi register
  320. [    0.415996] bsp_disp_ep952_set_mode: ====
  321. [    0.416004] ep952_set_mode: ====hdmi_mode = 5
  322. [    0.416013] ep952_set_mode: ====g_hdmi_vic = 4
  323. [    0.416022] disp_lcd_set_hdmi_mode...pixel_clk = 74250000drv_lcd_enable: ====
  324. [    0.416134] disp_lcd_pre_enable: ====
  325. [    0.416200] lcd_clk_config111 ======lcd ddddclk = 74250000
  326. [    0.416210] lcd_clk_config222 ======lcd ddddclk = 74250000
  327. [    0.416220] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
  328. [    0.416231] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
  329. [    0.416725] hdmi_i2c_detect=============
  330. [    0.416735] err.
  331. [    0.417136] [LCD]open, step 0 finish
  332. [    0.426187] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
  333. [    0.426202] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
  334. [    0.426216] [sunxi_hci_sunxi]: get usb_regulator is nocare
  335. [    0.426243] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
  336. [    0.426255] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
  337. [    0.426267] [sunxi_hci_sunxi]: get usb_regulator is nocare
  338. [    0.426497] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
  339. [    0.426523] get usbc0(usb_restrict pin) failed
  340. [    0.426620] [sw_udc]: udc_init: version 20080411
  341. [    0.426716] [sw_udc]: usb_vbase  = 0xf1c19000
  342. [    0.426728] [sw_udc]: sram_vbase = 0xf1c00000
  343. [    0.426747] [sw_udc]: open_usb_clock
  344. [    0.426794] udc->driver is null, udc is need not stop
  345. [    0.427139] [ddrfreq] dram_clk value is 600
  346. [    0.427148] [ddrfreq] sunxi_ddrfreq_max=600000
  347. [    0.427157] [ddrfreq] dram_type value is 3
  348. [    0.427166] [ddrfreq] dram_zq value is 0x3bbb
  349. [    0.427175] [ddrfreq] dram_odt_en value is 1
  350. [    0.427184] [ddrfreq] dram_para1 value is 0x10e20100
  351. [    0.427193] [ddrfreq] dram_para2 value is 0x0
  352. [    0.427202] [ddrfreq] dram_mr0 value is 0x1c70
  353. [    0.427211] [ddrfreq] dram_mr1 value is 0x40
  354. [    0.427220] [ddrfreq] dram_mr2 value is 0x18
  355. [    0.427229] [ddrfreq] dram_mr3 value is 0x0
  356. [    0.427238] [ddrfreq] dram_tpr0 value is 0x47a14f
  357. [    0.427247] [ddrfreq] dram_tpr1 value is 0x1c2294c
  358. [    0.427257] [ddrfreq] dram_tpr2 value is 0x69049
  359. [    0.427265] [ddrfreq] dram_tpr3 value is 0x0
  360. [    0.427274] [ddrfreq] dram_tpr4 value is 0x0
  361. [    0.427283] [ddrfreq] dram_tpr5 value is 0x0
  362. [    0.427292] [ddrfreq] dram_tpr6 value is 0x0
  363. [    0.427301] [ddrfreq] dram_tpr7 value is 0x0
  364. [    0.427309] [ddrfreq] dram_tpr8 value is 0x0
  365. [    0.427318] [ddrfreq] dram_tpr9 value is 0x0
  366. [    0.427327] [ddrfreq] dram_tpr10 value is 0x0
  367. [    0.427336] [ddrfreq] dram_tpr11 value is 0x0
  368. [    0.427344] [ddrfreq] dram_tpr12 value is 168
  369. [    0.427352] [ddrfreq] sunxi_ddrfreq_min=168000
  370. [    0.427361] [ddrfreq] dram_tpr13 value is 0x10901
  371. [    0.427495] [dsm] use sysconfig
  372. [    0.427503] [dsm] -----------Dram scene-freq Table------------
  373. [    0.427513] [dsm] scene =    0 frequency = 600000KHz
  374. [    0.427522] [dsm] scene =    1 frequency = 360000KHz
  375. [    0.427531] [dsm] scene =    2 frequency = 240000KHz
  376. [    0.427539] [dsm] scene =    3 frequency = 168000KHz
  377. [    0.427547] [dsm] --------------------------------------------
  378. [    0.427678] [ddrfreq] LV_count value is 3
  379. [    0.427699] [ddrfreq] ---------------Dram V-F Table---------------
  380. [    0.427710] [ddrfreq] voltage = 1100mv frequency = 552000KHz
  381. [    0.427719] [ddrfreq] voltage = 1100mv frequency = 360000KHz
  382. [    0.427728] [ddrfreq] voltage = 1100mv frequency =    0KHz
  383. [    0.427737] [ddrfreq] --------------------------------------------
  384. [    0.427896] [ddrfreq] last_vdd=1100
  385. [    0.427966] [ddrfreq] __sram_start: 0xc06c3000, __sram_end: 0xc06c4074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
  386. [    0.427979] [ddrfreq] sunxi dramfreq probe ok!
  387. [    0.428284] NET: Registered protocol family 2
  388. [    0.439732] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  389. [    0.440321] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  390. [    0.440457] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
  391. [    0.440592] TCP: Hash tables configured (established 8192 bind 8192)
  392. [    0.440603] TCP: reno registered
  393. [    0.440875] NET: Registered protocol family 1
  394. [    0.441249] RPC: Registered named UNIX socket transport module.
  395. [    0.441260] RPC: Registered udp transport module.
  396. [    0.441268] RPC: Registered tcp transport module.
  397. [    0.441277] RPC: Registered tcp NFSv4.1 backchannel transport module.
  398. [    0.441990] [pm]aw_pm_init!
  399. [    0.442002] standby_mode = 1.
  400. [    0.442011] wakeup src cnt is : 1.
  401. [    0.442021] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
  402. [    0.442032] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
  403. [    0.442043] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
  404. [    0.442055] sunxi_reg_init enter
  405. [    0.442708] audit: initializing netlink socket (disabled)
  406. [    0.442753] type=2000 audit(0.440:1): initialized
  407. [    0.444775] NTFS driver 2.1.30 [Flags: R/W].
  408. [    0.444950] fuse init (API version 7.18)
  409. [    0.445371] msgmni has been set to 489
  410. [    0.445414] SELinux:  Registering netfilter hooks
  411. [    0.447024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  412. [    0.447042] io scheduler noop registered
  413. [    0.447051] io scheduler deadline registered
  414. [    0.447135] io scheduler cfq registered (default)
  415. [    0.447165] pwm module init!
  416. [    0.447709] sw_uart_get_devinfo()1428 - uart0 has no uart_regulator.
  417. [    0.447726] sw_uart_get_devinfo()1428 - uart1 has no uart_regulator.
  418. [    0.448106] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  419. [    0.448125] sw_console_setup()1188 - console setup baud 115200 parity n bits 8, flow n
  420. [    0.448405] console [ttyS0] enabled
  421. [    0.448733] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  422. [    0.452991] loop: module loaded
  423. [    0.453291] [NAND]panic_buff_handle 0xc7708000 ,0x47708000
  424. [    0.453308] [NAND][NAND]nand init start, nand0_used_flag is 1
  425. [    0.453317] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
  426. [    0.453330] regisger ISP =====================
  427. [    0.453377] [NAND]nand init start
  428. [    0.453387] NandHwInit: Start Nand Hardware initializing .....
  429. [    0.453396] kernel:nand version: 3 5018 20181107 16671134
  430. [    0.453417] [NAND] channel cnt is 1
  431. [    0.453426] ndfc version: 1
  432. [    0.453433] ndfc dma mode: MBUS DMA
  433. [    0.453441] pin count:19
  434. [    0.453550] NAND_ClkRequest: get pll6 rate 600000000HZ
  435. [    0.453740] nand:get voltage axp22_dcdc1 ok:c66bfa80
  436. [    0.453752] Reset NDFC 0
  437. [    0.453762] NFC Randomizer start.
  438. [    0.453784] NFC_ResetChip: 0x101, 0x100 0x10095
  439. [    0.453793] NFC_ResetChip: 0xff, ch: 0
  440. [    0.453861] [PHY_DBG] CH 0 Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
  441. [    0.453871] nand id of two channel is not the same, set to 1 channel mode
  442. [    0.453883] [SCAN_DBG] Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
  443. [    0.453900] [SCAN_DBG] NandTwoPlaneOp: 1, DriverTwoPlaneOPCfg: 1, 0xfffffdbf
  444. [    0.453912] nand_para0, id_number_ctl, nand type err! 0
  445. [    0.453920] _UpdateExtAccessFreqPara: no para.
  446. [    0.453930] NFC_ResetChip: 0x1000101, 0x100 0x10095
  447. [    0.453939] NFC_ResetChip: 0xff, ch: 0
  448. [    0.453977] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
  449. [    0.453988] NFC_ResetChip: 0x2000109, 0x100 0x10095
  450. [    0.453996] NFC_ResetChip: 0xff, ch: 0
  451. [    0.454010] wrong Rb connect Mode, chip = 2 ,RbConnectMode = 1
  452. [    0.454044] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
  453. [    0.454055] NFC_ResetChip: 0x3000109, 0x100 0x10095
  454. [    0.454063] NFC_ResetChip: 0xff, ch: 0
  455. [    0.454077] wrong Rb connect Mode, chip = 3 ,RbConnectMode = 1
  456. [    0.454110] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
  457. [    0.454121] Reset NDFC 0
  458. [    0.454131] PageCachePool.PageCache0: 0xc65f8000
  459. [    0.454145] PageCachePool.PageCache1: 0xc66ee000
  460. [    0.454157] PageCachePool.PageCache2: 0xc6692000
  461. [    0.454169] PageCachePool.PageCache3: 0xc66e2000
  462. [    0.454181] PageCachePool.PageCache4: 0xc66e4000
  463. [    0.454190] PageCachePool.SpareCache: 0xc66372c0
  464. [    0.454201] PageCachePool.TmpPageCache: 0xc66e6000
  465. [    0.454213] PageCachePool.TmpPageCache1: 0xc66e8000
  466. [    0.454224] PHY_ChangeMode: sclk0 will be changed! 10 -> 30
  467. [    0.454236] PHY_ChangeMode: before check blank page, 0x101, 0x100, 0x10095, 0x21f
  468. [    0.455014] _check_scan_data, it is a free page(type 1), block 4
  469. [    0.455024] _check_scan_data, read error, block 4 !
  470. [    0.455776] _check_scan_data, it is a free page(type 1), block 5
  471. [    0.455785] _check_scan_data, read error, block 5 !
  472. [    0.456536] _check_scan_data, it is a free page(type 1), block 6
  473. [    0.456546] _check_scan_data, read error, block 6 !
  474. [    0.457298] _check_scan_data, it is a free page(type 1), block 7
  475. [    0.457308] _check_scan_data, read error, block 7 !
  476. [    0.457647] _check_scan_data, ok, block 8
  477. [    0.457655] _check_scan_data, valid data for ddr scan, block 8
  478. [    0.457664] PHY_ChangeMode: valid burned data!
  479. [    0.457673] PHY_ChangeMode: timing_change 1,  sclk0_bak 10, sclk0 30!
  480. [    0.457693] _get_right_timing_para, set edo to 1 for sdr nand.
  481. [    0.457713] Physic_Info_Read start!!
  482. [    0.457720] Physic_Info_Get_Offset start!!
  483. [    0.459084] physic info start_block 4
  484. [    0.459398] physic info start_block 5
  485. [    0.459710] physic info start_block 6
  486. [    0.460032] physic info start_block 7
  487. [    0.460345] physic info start_block 8
  488. [    0.460488] Physic_Info_Get_One_Copy start!!
  489. [    0.461446] block 14 page 56
  490. [    0.461589] block 14 page 57
  491. [    0.461731] block 14 page 58
  492. [    0.461873] block 14 page 59
  493. [    0.462015] block 14 page 60
  494. [    0.462157] block 14 page 61
  495. [    0.462299] block 14 page 62
  496. [    0.462441] block 14 page 63
  497. [    0.462717] block 15 page 0
  498. [    0.462859] block 15 page 1
  499. [    0.463001] block 15 page 2
  500. [    0.463143] block 15 page 3
  501. [    0.463285] block 15 page 4
  502. [    0.463430] block 15 page 5
  503. [    0.463573] block 15 page 6
  504. [    0.463715] block 15 page 7
  505. [    0.463939] physic info copy is ok
  506. [    0.463947] NandGetPhyInfoFlag !!!!
  507. [    0.463955]
  508. [    0.463957]
  509. [    0.463964] [SCAN_DBG] ==============Nand Architecture Parameter==============
  510. [    0.463975] [SCAN_DBG]    Nand Chip ID:         0x9510dcec 0xffffff56
  511. [    0.463984] [SCAN_DBG]    Nand Channel Count:   0x1
  512. [    0.463992] [SCAN_DBG]    Nand Chip Count:      0x1
  513. [    0.464000] [SCAN_DBG]    Nand Chip Connect:    0x1
  514. [    0.464008] [SCAN_DBG]    Nand Rb Connect Mode:      0x1
  515. [    0.464016] [SCAN_DBG]    Sector Count Of Page: 0x4
  516. [    0.464024] [SCAN_DBG]    Page Count Of Block:  0x40
  517. [    0.464032] [SCAN_DBG]    Block Count Of Die:   0x1000
  518. [    0.464040] [SCAN_DBG]    Plane Count Of Die:   0x2
  519. [    0.464048] [SCAN_DBG]    Die Count Of Chip:    0x1
  520. [    0.464056] [SCAN_DBG]    Bank Count Of Chip:   0x1
  521. [    0.464064] [SCAN_DBG]    Optional Operation:   0x8c
  522. [    0.464072] [SCAN_DBG]    Access Frequency:     0x1e
  523. [    0.464080] [SCAN_DBG]    ECC Mode:             0x0
  524. [    0.464088] [SCAN_DBG]    Read Retry Type:      0x0
  525. [    0.464096] [SCAN_DBG]    DDR Type:             0x0
  526. [    0.464104] [SCAN_DBG] =======================================================
  527. [    0.464109]
  528. [    0.464116] [SCAN_DBG] ==============Optional Operaion Parameter==============
  529. [    0.464126] [SCAN_DBG]    MultiPlaneReadCmd:      0x0, 0x30
  530. [    0.464135] [SCAN_DBG]    MultiPlaneWriteCmd:     0x11, 0x81
  531. [    0.464144] [SCAN_DBG]    MultiPlaneCopyReadCmd:  0x0, 0x0, 0x35
  532. [    0.464154] [SCAN_DBG]    MultiPlaneCopyWriteCmd: 0x85, 0x11, 0x81
  533. [    0.464164] [SCAN_DBG]    MultiPlaneStatusCmd:    0x70
  534. [    0.464172] [SCAN_DBG]    InterBnk0StatusCmd:     0xf1
  535. [    0.464180] [SCAN_DBG]    InterBnk1StatusCmd:     0xf2
  536. [    0.464188] [SCAN_DBG]    BadBlockFlagPosition:   0x1
  537. [    0.464196] [SCAN_DBG]    MultiPlaneBlockOffset:  0x1
  538. [    0.464204] [SCAN_DBG] =======================================================
  539. [    0.464215] kernel:nand info: 9510dcec ffffff56 8c 0 0
  540. [    0.464240] nand_para0, sorting_flag, nand type err! 0
  541. [    0.464249]
  542. [    0.464254] [FORMAT_DBG] ===========Logical Architecture Parameter===========
  543. [    0.464264] [FORMAT_DBG]    Page Count of Logic Block:  0x40
  544. [    0.464273] [FORMAT_DBG]    Sector Count of Logic Page: 0x8
  545. [    0.464281] [FORMAT_DBG]    Block Count of Die:         0x800
  546. [    0.464290] [FORMAT_DBG]    Die Count:                  0x1
  547. [    0.464298] [FORMAT_DBG] ===================================================
  548. [    0.464311] NandHwInit: End Nand Hardware initializing ..... OK!
  549. [    0.464351] [ND]boot start
  550. [    0.464366] [ND]partition->size :931840
  551. [    0.464374] [ND]partition->cross_talk :0
  552. [    0.464381] [ND]partition->attribute :0
  553. [    0.464388] [ND]partition->start.Chip_NO :0
  554. [    0.464396] [ND]partition->start.Block_NO :23
  555. [    0.464403] [ND]partition->end.Chip_NO :0
  556. [    0.464410] [ND]partition->end.Block_NO :2047
  557. [    0.464419] [ND]partition->nand_disk[0].size :32768
  558. [    0.464427] [ND]partition->nand_disk[0].type :0
  559. [    0.464435] [ND]partition->nand_disk[1].size :16384
  560. [    0.464444] [ND]partition->nand_disk[1].type :0
  561. [    0.464452] [ND]partition->nand_disk[2].size :4096
  562. [    0.464460] [ND]partition->nand_disk[2].type :0
  563. [    0.464468] [ND]partition->nand_disk[3].size :16384
  564. [    0.464476] [ND]partition->nand_disk[3].type :0
  565. [    0.464485] [ND]partition->nand_disk[4].size :389120
  566. [    0.464493] [ND]partition->nand_disk[4].type :0
  567. [    0.464501] [ND]partition->nand_disk[5].size :360448
  568. [    0.464510] [ND]partition->nand_disk[5].type :0
  569. [    0.464518] [ND]partition->nand_disk[6].size :8192
  570. [    0.464526] [ND]partition->nand_disk[6].type :0
  571. [    0.464534] [ND]partition->nand_disk[7].size :104448
  572. [    0.464543] [ND]partition->nand_disk[7].type :0
  573. [    0.464551] [ND]partition->nand_disk[8].size :-1
  574. [    0.464559] [ND]partition->nand_disk[8].type :-1
  575. [    0.464567] [ND]partition->nand_disk[9].size :-1
  576. [    0.464575] [ND]partition->nand_disk[9].type :-1
  577. [    0.464583] [ND]partition->nand_disk[10].size :-1
  578. [    0.464592] [ND]partition->nand_disk[10].type :-1
  579. [    0.464600] [ND]partition->nand_disk[11].size :-1
  580. [    0.464608] [ND]partition->nand_disk[11].type :-1
  581. [    0.464616] [ND]partition->nand_disk[12].size :-1
  582. [    0.464625] [ND]partition->nand_disk[12].type :-1
  583. [    0.464633] [ND]partition->nand_disk[13].size :-1
  584. [    0.464641] [ND]partition->nand_disk[13].type :-1
  585. [    0.464649] [ND]partition->nand_disk[14].size :-1
  586. [    0.464658] [ND]partition->nand_disk[14].type :-1
  587. [    0.464666] [ND]partition->nand_disk[15].size :-1
  588. [    0.464674] [ND]partition->nand_disk[15].type :-1
  589. [    0.464682] [ND]partition->nand_disk[16].size :-1
  590. [    0.464691] [ND]partition->nand_disk[16].type :-1
  591. [    0.464699] [ND]partition->nand_disk[17].size :-1
  592. [    0.464707] [ND]partition->nand_disk[17].type :-1
  593. [    0.464716] [ND]partition->nand_disk[18].size :-1
  594. [    0.464724] [ND]partition->nand_disk[18].type :-1
  595. [    0.464732] [ND]partition->nand_disk[19].size :-1
  596. [    0.464740] [ND]partition->nand_disk[19].type :-1
  597. [    0.464749] [ND]partition->nand_disk[20].size :-1
  598. [    0.464757] [ND]partition->nand_disk[20].type :-1
  599. [    0.464765] [ND]partition->nand_disk[21].size :-1
  600. [    0.464773] [ND]partition->nand_disk[21].type :-1
  601. [    0.464782] [ND]partition->nand_disk[22].size :-1
  602. [    0.464790] [ND]partition->nand_disk[22].type :-1
  603. [    0.464798] [ND]partition->nand_disk[23].size :-1
  604. [    0.464806] [ND]partition->nand_disk[23].type :-1
  605. [    0.464819] [NE]partition_num: 0,size :0xe3800,cross_talk 0
  606. [    0.464830] [NE]part mbr size: 0x8000 type: 0
  607. [    0.464839] [NE]part boot-res size: 0x4000 type: 0
  608. [    0.464848] [NE]part env size: 0x1000 type: 0
  609. [    0.464856] [NE]part boot size: 0x4000 type: 0
  610. [    0.464865] [NE]part rootfs size: 0x5f000 type: 0
  611. [    0.464874] [NE]part rootfs_data size: 0x58000 type: 0
  612. [    0.464883] [NE]part misc size: 0x2000 type: 0
  613. [    0.464891] [NE]part UDISK size: 0x19800 type: 0
  614. [    0.465004] [ND]factory bad block:0,1030 PartitionNO:0
  615. [    0.465014] [ND]factory bad block:0,1031 PartitionNO:0
  616. [    0.465113] [ND]factory bad block:0,2047 PartitionNO:0
  617. [    0.465121] [ND]build 1 phy_partition !
  618. [    0.465129] [ND]nand_info->type :0
  619. [    0.465136] [ND]nand_info->SectorNumsPerPage :8
  620. [    0.465144] [ND]nand_info->BytesUserData :16
  621. [    0.465151] [ND]nand_info->PageNumsPerBlk :64
  622. [    0.465159] [ND]nand_info->BlkPerChip :2048
  623. [    0.465166] [ND]nand_info->FirstBuild :0
  624. [    0.465173] [ND]nand_info->FullBitmap :1610612883
  625. [    0.465181] [ND]nand_info->bad_block_addr.Chip_NO :0
  626. [    0.465189] [ND]nand_info->bad_block_addr.Block_NO :0
  627. [    0.465197] [ND]nand_info->mbr_block_addr.Chip_NO :0
  628. [    0.465205] [ND]nand_info->mbr_block_addr.Block_NO :0
  629. [    0.465213] [ND]nand_info->no_used_block_addr.Chip_NO :0
  630. [    0.465222] [ND]nand_info->no_used_block_addr.Block_NO :23
  631. [    0.465230] [ND]nand_info->new_bad_block_addr.Chip_NO :0
  632. [    0.465238] [ND]nand_info->new_bad_block_addr.Block_NO :0
  633. [    0.465247] [ND]nand_info->new_bad_page_addr :65535
  634. [    0.465254] [ND]nand_info->partition_nums :1
  635. [    0.465262] [ND]sizeof partition:2384
  636. [    0.465269] [ND]nand_info->partition:0:
  637. [    0.465276] [ND]size:0xe3800
  638. [    0.465282] [ND]cross_talk:0x0
  639. [    0.465289] [ND]attribute:0x0
  640. [    0.465296] [ND]start: chip:0 block:23
  641. [    0.465303] [ND]end  : chip:0 block:2047
  642. [    0.465311]  check_phyisc start.
  643. [    0.469632] uboot->sys_mode 0
  644. [    0.469640] uboot->use_lsb_page 0
  645. [    0.469646] uboot->copys 4
  646. [    0.469653] uboot->uboot_len 901120
  647. [    0.469660] uboot->total_len 933888
  648. [    0.469667] uboot->uboot_pages 440
  649. [    0.469674] uboot->total_pages 456
  650. [    0.469681] uboot->blocks_per_total 8
  651. [    0.469688] uboot->page_offset_for_nand_info 440
  652. [    0.469695] uboot->uboot_block
  653. [    0.469701]  8 16 24 32 0 0 0 0 0 0 0
  654. [    0.469731]  0 0 0 0 0 0 0 0 0 0
  655. [    0.469757]  0 0 0 0 0 0 0 0 0
  656. [    0.520046] [LCD]open, step 1 finish
  657. [    0.535454] nand_read_uboot_one ok 0
  658. [    0.536736] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
  659. [    0.536750] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
  660. [    0.536776] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
  661. [    0.601473] nand_read_uboot_one ok 1
  662. [    0.623353] [LCD]open, step 2 finish
  663. [    0.626688] ep952_open:454
  664. [    0.626725] ep952_open:468
  665. [    0.626821] [LCD]open, step 3 finish
  666. [    0.626829] ep952_thread:303
  667. [    0.667364] nand_read_uboot_one ok 2
  668. [    0.728558] #####################
  669. [    0.728567] # HDMI - Disconnect #
  670. [    0.728581] #####################
  671. [    0.730245] < EP952 Tx Power Down >
  672. [    0.730253]
  673. [    0.730256] State Transist: Power Down -> [TXS_Search_EDID]
  674. [    0.733525] nand_read_uboot_one ok 3
  675. [    0.733534]  check_phyisc end.
  676. [    0.733757] [NAND]nand_probe
  677. [    0.733792] [NAND]nand type err!
  678. [    0.733981] [ND]nand_partition0
  679. [    0.734108] [ND]nftl start:2025,205
  680. [    0.734373] [ND]first
  681. [    1.001210] [ND]bad block: 1007
  682. [    1.001218] [ND]bad block: 1008
  683. [    1.071711] _ReadCheckSpare: filled invalid page(0,1297,0)...
  684. [    1.073371] _ReadCheckSpare: filled invalid page(0,1304,0)...
  685. [    1.075000] _ReadCheckSpare: filled invalid page(0,1311,0)...
  686. [    1.076583] _ReadCheckSpare: filled invalid page(0,1318,0)...
  687. [    1.078614] _ReadCheckSpare: filled invalid page(0,1327,0)...
  688. [    1.080199] _ReadCheckSpare: filled invalid page(0,1334,0)...
  689. [    1.080451] _ReadCheckSpare: filled invalid page(0,1335,0)...
  690. [    1.084034] _ReadCheckSpare: filled invalid page(0,1351,0)...
  691. [    1.084508] _ReadCheckSpare: filled invalid page(0,1353,0)...
  692. [    1.084758] _ReadCheckSpare: filled invalid page(0,1354,0)...
  693. [    1.085009] _ReadCheckSpare: filled invalid page(0,1355,0)...
  694. [    1.092439] _ReadCheckSpare: filled invalid page(0,1388,0)...
  695. [    1.092690] _ReadCheckSpare: filled invalid page(0,1389,0)...
  696. [    1.092940] _ReadCheckSpare: filled invalid page(0,1390,0)...
  697. [    1.104748] _ReadCheckSpare: filled invalid page(0,1443,0)...
  698. [    1.239153] [ND]bad block: 2024
  699. [    1.239162] [ND]before second 2022 1820.
  700. [    1.443127] [NE]smart->version:aaaaaa01;
  701. [    1.443139] [NE]smart->total_recv_read_sectors:338289;
  702. [    1.443148] [NE]smart->total_recv_write_sectors:362595;
  703. [    1.443156] [NE]smart->total_real_read_pages:45412;
  704. [    1.443164] [NE]smart->total_real_write_pages:46416;
  705. [    1.443172] [NE]smart->total_recv_discard_sectors:376832;
  706. [    1.443180] [NE]smart->total_real_discard_sectors:376832;
  707. [    1.443189] [NE]smart->total_recv_read_claim_pages:0;
  708. [    1.443197] [NE]smart->total_gc_times:0;
  709. [    1.443204] [NE]smart->total_gc_pages:0;
  710. [    1.443211] [NE]smart->total_wl_times:0;
  711. [    1.443219] [NE]smart->total_real_read_error_pages:0;
  712. [    1.443227] [NE]smart->total_real_write_error_pages:0;
  713. [    1.443235] [NE]smart->total_normal_power_cycles:d;
  714. [    1.443243] [NE]smart->total_unusual_power_cycles:0;
  715. [    1.443251] [NE]smart->max_block_erase_times:0;
  716. [    1.443259] [NE]smart->min_block_erase_times:0;
  717. [    1.443266] [NE]smart->max_block_used_counter:0;
  718. [    1.443274] [NE]smart->min_block_used_counter:0;
  719. [    1.443282] [NE]smart->read_reclaim_utc:0;
  720. [    1.443289] [NE]smart->cross_talk_times:0;
  721. [    1.484037] [NE]recover_phy_page_mapping no used page 36!!
  722. [    1.484048] [ND]recover 1294 36
  723. [    1.484062] [ND] nand3.5 version:0001 date:Jun 15 2019 06:37:52
  724. [    1.484071] [ND]zone->nand_chip->blk_per_chip: 2025
  725. [    1.484079] [ND]zone->nand_chip->bytes_per_page: 4096
  726. [    1.484087] [ND]zone->nand_chip->pages_per_blk: 64
  727. [    1.484095] [ND]zone->nand_chip->max_erase_times: 3000
  728. [    1.484104] [ND]zone->nand_chip->support_read_reclaim: 43985
  729. [    1.484112] [ND]zone->test: 0
  730. [    1.484119] [ND]zone->zone_no: 0
  731. [    1.484125] [ND]zone->zone_attr: 0
  732. [    1.484132] [ND]zone->blocks: 2022
  733. [    1.484139] [ND]zone->bad_block: 3
  734. [    1.484146] [ND]zone->logic_cap_in_sects: 931840
  735. [    1.484155] [ND]zone->backup_cap_in_sects: 103424
  736. [    1.484162] [ND]zone->free_block_num: 1356
  737. [    1.484170] [ND]zone->gc_strategy.start_gc_free_blocks: 40
  738. [    1.484179] [ND]zone->gc_strategy.stop_gc_free_blocks: 134
  739. [    1.484187] [ND]zone->gc_strategy.gc_page: 0
  740. [    1.484195] [ND]zone->gc_strategy.process: 1
  741. [    1.484203] [ND]zone->prio_gc.prio_type : 0
  742. [    1.484211] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
  743. [    1.484220] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 2023
  744. [    1.484230] [ND]zone->zone_phy_page_map_for_gc: c66da800
  745. [    1.484238] [ND]zone->current_block.user_info: c666e000
  746. [    1.484247] [ND]zone->current_block.block_info: c5c2b5f8
  747. [    1.484256] [ND]zone->current_block.block_info->phy_block.Block_NO: 1294
  748. [    1.484265] [ND]zone->current_block.page_used: 36
  749. [    1.484273] [ND]zone->current_block.block_info->block_used_count: 732
  750. [    1.484283] [ND]zone->read_reclaim_complete: 0
  751. [    1.484291] [ND]zone->temp_page_buf: c66a1000
  752. [    1.484298] [ND]zone->max_erase_num: 1
  753. [    1.484306] [ND]zone->cache.cache_totals: 0
  754. [    1.484313] [ND]zone->cfg->nftl_dont_use_cache: 0
  755. [    1.484321] [ND]zone->cfg->nftl_use_cache_sort: 1
  756. [    1.484329] [ND]zone->cfg->nftl_support_gc_read_reclaim: 1
  757. [    1.484338] [ND]zone->cfg->nftl_support_wear_leveling: 1
  758. [    1.484346] [ND]zone->cfg->nftl_need_erase: 0
  759. [    1.484354] [ND]zone->cfg->nftl_min_free_block_num: 19
  760. [    1.484363] [ND]zone->cfg->nftl_gc_threshold_free_block_num: 8
  761. [    1.484371] [ND]zone->cfg->nftl_min_free_block: 4
  762. [    1.484379] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
  763. [    1.484388] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
  764. [    1.484397] [ND]zone->cfg->nftl_max_cache_num: 20
  765. [    1.484405] [ND]zone->cfg->nftl_max_cache_write_num: 1
  766. [    1.484413] [ND]zone->cfg->nftl_cross_talk: 0
  767. [    1.484421] [ND]zone->cfg->nftl_read_claim_interval: 1296000
  768. [    1.484430] [NE]smart->version:aaaaaa01;
  769. [    1.484437] [NE]smart->total_recv_read_sectors:338289;
  770. [    1.484445] [NE]smart->total_recv_write_sectors:362595;
  771. [    1.484454] [NE]smart->total_real_read_pages:45513;
  772. [    1.484462] [NE]smart->total_real_write_pages:46416;
  773. [    1.484470] [NE]smart->total_recv_discard_sectors:376832;
  774. [    1.484478] [NE]smart->total_real_discard_sectors:376832;
  775. [    1.484486] [NE]smart->total_recv_read_claim_pages:0;
  776. [    1.484494] [NE]smart->total_gc_times:0;
  777. [    1.484501] [NE]smart->total_gc_pages:0;
  778. [    1.484508] [NE]smart->total_wl_times:0;
  779. [    1.484515] [NE]smart->total_real_read_error_pages:0;
  780. [    1.484524] [NE]smart->total_real_write_error_pages:0;
  781. [    1.484532] [NE]smart->total_normal_power_cycles:d;
  782. [    1.484539] [NE]smart->total_unusual_power_cycles:0;
  783. [    1.484547] [NE]smart->max_block_erase_times:0;
  784. [    1.484555] [NE]smart->min_block_erase_times:0;
  785. [    1.484562] [NE]smart->max_block_used_counter:0;
  786. [    1.484570] [NE]smart->min_block_used_counter:0;
  787. [    1.484577] [NE]smart->read_reclaim_utc:0;
  788. [    1.484585] [NE]smart->cross_talk_times:0;
  789. [    1.484591] [ND]nftl ok!
  790. [    1.484599] [ND] panic block 1287!
  791. [    1.484606] [ND] panic block 1280!
  792. [    1.484612] [ND] panic block 1273!
  793. [    1.484701] [ND]max_erase_times = 20000
  794. [    1.484818] [NAND]nand_dev add mbr
  795. [    1.484827] [NAND]nand_dev add boot-res
  796. [    1.485809]  nanda:
  797. [    1.486017] [NAND]nand_dev add env
  798. [    1.486719]  nandb: unknown partition table
  799. [    1.486907] [NAND]nand_dev add boot
  800. [    1.487484]  nandc:
  801. [    1.487652] [NAND]nand_dev add rootfs
  802. [    1.488220]  nandd: unknown partition table
  803. [    1.488383] [NAND]nand_dev add rootfs_data
  804. [    1.488941]  nande: unknown partition table
  805. [    1.489106] [NAND]nand_dev add misc
  806. [    1.489672]  nandf: unknown partition table
  807. [    1.489838] [NAND]nand_dev add UDISK
  808. [    1.490153]  nandg: unknown partition table
  809. [    1.490413] [NAND]nand init end
  810. [    1.490631] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
  811. [    1.490646] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
  812. [    1.490678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  813. [    1.490767] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc06fa6c4
  814. [    1.490785] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
  815. [    1.510814] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
  816. [    1.510831] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  817. [    1.510864] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  818. [    1.511547] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  819. [    1.520027] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  820. [    1.520057] ehci_irq: highspeed device connect
  821. [    1.520699] usb usb1: hdev->level=0
  822. [    1.520709] hub 1-0:1.0: USB hub found
  823. [    1.520733] hub 1-0:1.0: 1 port detected
  824. [    1.521116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  825. [    1.521185] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc06fa7c8
  826. [    1.521201] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
  827. [    1.541229] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  828. [    1.541259] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  829. [    1.541295] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  830. [    1.597924] usb usb2: hdev->level=0
  831. [    1.597934] hub 2-0:1.0: USB hub found
  832. [    1.597953] hub 2-0:1.0: 1 port detected
  833. [    1.598344] get serial_unique failed
  834. [    1.598539] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
  835. [    1.598555] [sw_udc]: alloc request: ep(0xc06a3668, ep0, 64), req(0xc5c1f540)
  836. [    1.598573] [sw_udc]: sunxi_udc_pullup, is_on = 0
  837. [    1.598586] [sw_udc]: usbd_stop_work
  838. [    1.598683] file system registered
  839. [    1.599739] android_usb gadget: Mass Storage Function, version: 2009/09/11
  840. [    1.599752] android_usb gadget: Number of LUNs=3
  841. [    1.599764]  lun0: LUN: removable file: (no medium)
  842. [    1.599774]  lun1: LUN: removable file: (no medium)
  843. [    1.599784]  lun2: LUN: removable file: (no medium)
  844. [    1.600168] android_usb gadget: android_usb ready
  845. [    1.600192] [sw_hcd0]: usb host driver initialize........
  846. [    1.600569] mousedev: PS/2 mouse device common for all mice
  847. [    1.600975] input: sunxi-keyboard as /devices/virtual/input/input1
  848. [    1.601264] [RTC] WARNING: Rtc time will be wrong!!
  849. [    1.601490] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  850. [    1.601536] i2c /dev entries driver
  851. [    1.601919] sunxi cedar version 0.1
  852. [    1.601970] [cedar]: install start!!!
  853. [    1.602146] [cedar]: install end!!!
  854. [    1.604875] axp22_dcdc1: Failed to create debugfs directory
  855. [    1.606360] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  856. [    1.606707] autohotplug_init init ok
  857. [    1.606743] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
  858. [    1.606759] cur: pll=1008000000, cpudiv=1, axidiv=3
  859. [    1.606784] axp22_dcdc3: Failed to create debugfs directory
  860. [    1.606809] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 120MHz
  861. [    1.606851] -------------------CPU V-F Table--------------------
  862. [    1.606861] frequency = 1536000KHz voltage = 1500mv
  863. [    1.606869] frequency = 1344000KHz voltage = 1460mv
  864. [    1.606878] frequency = 1200000KHz voltage = 1320mv
  865. [    1.606887] frequency = 1008000KHz voltage = 1200mv
  866. [    1.606896] frequency = 816000KHz voltage = 1100mv
  867. [    1.606905] frequency = 648000KHz voltage = 1040mv
  868. [    1.606914] frequency =    0KHz voltage = 1040mv
  869. [    1.606922] frequency =    0KHz voltage = 1040mv
  870. [    1.606930] -----------------------------------------------------
  871. [    1.607148] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.120 2016-08-3 10:59) Compiled in Jun 15 2019 at 06:38:06
  872. [    1.607177] [mmc]: MMC host used card: 0x0, boot card: 0x0, io_card 0
  873. [    1.607274] [led]:sunxi_led_init begin!
  874. [    1.607294] led1 gpio number is 39
  875. [    1.607303] led1_trigger gpio number is none
  876. [    1.607314] led2 gpio number is 33
  877. [    1.607324] led2_trigger gpio number is none
  878. [    1.607616] Registered led device: led1
  879. [    1.607722] Registered led device: led2
  880. [    1.608528] usbcore: registered new interface driver usbhid
  881. [    1.608538] usbhid: USB HID core driver
  882. [    1.609088] ashmem: initialized
  883. [    1.609208] logger: created 256K log 'log_main'
  884. [    1.609322] logger: created 256K log 'log_events'
  885. [    1.609451] logger: created 256K log 'log_radio'
  886. [    1.609569] logger: created 256K log 'log_system'
  887. [    1.609782] Linux telephony interface: v1.00
  888. [    1.610115] usbcore: registered new interface driver snd-usb-audio
  889. [    1.614613] asoc: sndi2s0 <-> i2s0 mapping ok
  890. [    1.616022] [ audio ] err:try to get audio_pa_ctrl failed!
  891. [    1.616044] sunxi-pcm-codec: probe of sunxi-pcm-codec failed with error -14
  892. [    1.616618] input: headset as /devices/virtual/input/input2
  893. [    1.617091] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
  894. [    1.617316] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
  895. [    1.617329] I2S1 driver not init,just return.
  896. [    1.617494] u32 classifier
  897. [    1.617502]     Actions configured
  898. [    1.617513] Netfilter messages via NETLINK v0.30.
  899. [    1.617591] nf_conntrack version 0.5.0 (3919 buckets, 15676 max)
  900. [    1.618016] ctnetlink v0.93: registering with nfnetlink.
  901. [    1.618075] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  902. [    1.618085] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  903. [    1.618297] xt_time: kernel timezone is -0000
  904. [    1.618470] IPv4 over IPv4 tunneling driver
  905. [    1.618937] gre: GRE over IPv4 demultiplexor driver
  906. [    1.618949] ip_gre: GRE over IPv4 tunneling driver
  907. [    1.619613] ip_tables: (C) 2000-2006 Netfilter Core Team
  908. [    1.619807] arp_tables: (C) 2002 David S. Miller
  909. [    1.619870] TCP: cubic registered
  910. [    1.619880] Initializing XFRM netlink socket
  911. [    1.620310] NET: Registered protocol family 10
  912. [    1.621499] Mobile IPv6
  913. [    1.621536] ip6_tables: (C) 2000-2006 Netfilter Core Team
  914. [    1.621724] IPv6 over IPv4 tunneling driver
  915. [    1.622857] NET: Registered protocol family 17
  916. [    1.622890] NET: Registered protocol family 15
  917. [    1.622905] L2TP core driver, V2.0
  918. [    1.622912] L2TP IP encapsulation support (L2TPv3)
  919. [    1.622982] L2TP netlink interface
  920. [    1.623012] L2TP ethernet pseudowire support (L2TPv3)
  921. [    1.623556] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  922. [    1.623579] ThumbEE CPU extension supported.
  923. [    1.623600] Registering SWP/SWPB emulation handler
  924. [    1.624389] axp22_dc5ldo: incomplete constraints, leaving on
  925. [    1.624490] axp22_eldo2: incomplete constraints, leaving on
  926. [    1.624544] axp22_eldo1: incomplete constraints, leaving on
  927. [    1.624729] axp22_dldo1: incomplete constraints, leaving on
  928. [    1.624784] axp22_aldo3: incomplete constraints, leaving on
  929. [    1.624837] axp22_aldo2: incomplete constraints, leaving on
  930. [    1.624891] axp22_aldo1: incomplete constraints, leaving on
  931. [    1.624945] axp22_rtc: incomplete constraints, leaving on
  932. [    1.624999] axp22_dcdc5: incomplete constraints, leaving on
  933. [    1.625097] axp22_dcdc3: incomplete constraints, leaving on
  934. [    1.625150] axp22_dcdc2: incomplete constraints, leaving on
  935. [    1.625288] otg_wakelock_init: No USB transceiver found
  936. [    1.625926] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
  937. [    1.626327] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  938. [    1.626375] ths_fetch_sysconfig_para: type err  device_used = 1.
  939. [    1.626606] input: sunxi-ths as /devices/virtual/input/input4
  940. [    1.626989] suxi_ths: Kernel Thermal management registered
  941. [    1.627012] fetch C0_LV_count from sysconfig failed
  942. [    1.627377] sunxi_ths_bind : thermal-budget-0
  943. [    1.627390] ths_zone trip = 75, adjust lower = 0, upper = 1
  944. [    1.627421] ths_zone trip = 90, adjust lower = 1, upper = 3
  945. [    1.627442] CPU Budget:Register notifier
  946. [    1.627453] CPU Budget:register Success
  947. [    1.627464] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  948. [    1.631259] ALSA device list:
  949. [    1.631272]   #0: sndi2s0
  950. [    1.634395] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
  951. [    1.634459] VFS: Mounted root (ext4 filesystem) on device 93:24.
  952. [    1.635577] devtmpfs: mounted
  953. [    1.635953] Freeing init memory: 196K
  954. [    1.802455] [ND]flush cache 1 0!
  955. [    1.808166] EXT4-fs (nandd): re-mounted. Opts: errors=remount-ro,data=ordered
  956. [    1.826745] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  957. [    1.889027] [ND]flush cache 1 0!
  958. [    1.951872] usb 1-1: hdev->level=1
  959. [    1.951890] hub 1-1:1.0: USB hub found
  960. [    1.952090] hub 1-1:1.0: 4 ports detected
  961. [    2.013143] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
  962. [    2.020924] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
  963. [    2.032812] [ND]flush cache 1 0!
  964. [    2.045067] [ND]flush cache 1 0!
  965. [    2.045920] [ND]flush cache 1 0!
  966. [    2.048255] EXT4-fs (nandd): re-mounted. Opts: errors=remount-ro,data=ordered
  967. [    2.058770] [ND]flush cache 1 0!
  968. [    2.174895] udevd[117]: starting version 3.1.5
  969. [    2.216745] usb 1-1.4: new high-speed USB device number 3 using sunxi-ehci
  970. [    2.273413] ====codec_init_events===
  971. [    2.553427] vmalloc: allocation failure: 0 bytes
  972. [    2.553446] modprobe: page allocation failure: order:0, mode:0xd0
  973. [    2.555060] Get mali parameter successfully
  974. [    2.555101] Init Mali gpu successfully
  975. [    2.556464] Mali: Mali device driver loaded
  976. [    2.672744] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
  977. [    6.553619] [ND]flush cache 1 0!
  978. [    6.554593] [ND]flush cache 1 0!
  979. [    6.556503] [ND]flush cache 1 0!
  980. [   12.347504] [ND]flush cache 1 0!
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top