API tools faq
paste
Guest User

WNDR4700 Opewrt 19.07.1 GOOD USB BOOT

a guest
Feb 14th, 2020
77
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.61 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.162 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10860-a3ffeb413b)) #0 Mon Jan 6 16:47:09 2020
  2. [ 0.000000] Using WNDR4700 Platform machine description
  3. [ 0.000000] -----------------------------------------------------
  4. [ 0.000000] phys_mem_size = 0x10000000
  5. [ 0.000000] dcache_bsize = 0x20
  6. [ 0.000000] icache_bsize = 0x20
  7. [ 0.000000] cpu_features = 0x0000000010100040
  8. [ 0.000000] possible = 0x0000000030100040
  9. [ 0.000000] always = 0x0000000000100000
  10. [ 0.000000] cpu_user_features = 0x8c008000 0x00000000
  11. [ 0.000000] mmu_features = 0x00000008
  12. [ 0.000000] -----------------------------------------------------
  13. [ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000
  14. [ 0.000000] Memory hole size: 0MB
  15. [ 0.000000] Zone ranges:
  16. [ 0.000000] DMA [mem 0x0000000000000000-0x000000000fffffff]
  17. [ 0.000000] Normal empty
  18. [ 0.000000] Movable zone start for each node
  19. [ 0.000000] Early memory node ranges
  20. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
  21. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
  22. [ 0.000000] On node 0 totalpages: 65536
  23. [ 0.000000] free_area_init_node: node 0, pgdat c0560d98, node_mem_map cfdea000
  24. [ 0.000000] DMA zone: 512 pages used for memmap
  25. [ 0.000000] DMA zone: 0 pages reserved
  26. [ 0.000000] DMA zone: 65536 pages, LIFO batch:15
  27. [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
  28. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  29. [ 0.000000] pcpu-alloc: [0] 0
  30. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
  31. [ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
  32. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  33. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  35. [ 0.000000] Memory: 253932K/262144K available (4588K kernel code, 196K rwdata, 600K rodata, 180K init, 238K bss, 8212K reserved, 0K cma-reserved)
  36. [ 0.000000] Kernel virtual memory layout:
  37. [ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
  38. [ 0.000000] * 0xfde00000..0xfe000000 : consistent mem
  39. [ 0.000000] * 0xfde00000..0xfde00000 : early ioremap
  40. [ 0.000000] * 0xd1000000..0xfde00000 : vmalloc & ioremap
  41. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  42. [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
  43. [ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
  44. [ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
  45. [ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
  46. [ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
  47. [ 0.000000] time_init: decrementer frequency = 1000.000010 MHz
  48. [ 0.000000] time_init: processor frequency = 1000.000010 MHz
  49. [ 0.000015] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
  50. [ 0.000026] clocksource: timebase mult[800000] shift[23] registered
  51. [ 0.000047] clockevent: decrementer mult[80000015] shift[31] cpu[0]
  52. [ 0.000083] pid_max: default: 32768 minimum: 301
  53. [ 0.000197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  54. [ 0.000210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  55. [ 0.003353] random: get_random_u32 called from 0xc01ebb38 with crng_init=0
  56. [ 0.003603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  57. [ 0.003627] futex hash table entries: 256 (order: -1, 3072 bytes)
  58. [ 0.004113] NET: Registered protocol family 16
  59. [ 0.005052] PPC4XX OCM1: 32768 Bytes (enabled)
  60. [ 0.005072] PPC4XX OCM1: 32768 Bytes (non-cached)
  61. [ 0.005077] PPC4XX OCM1: 0 Bytes (cached)
  62. [ 0.005126] debugfs ppc4xx ocm: failed to create file
  63. [ 0.005301] 256k L2-cache enabled
  64. [ 0.005412] PCIE0: Checking link...
  65. [ 0.005418] PCIE0: Device detected, waiting for link...
  66. [ 0.005423] PCIE0: link is up !
  67. [ 0.113717] PCI host bridge /plb/pciex@d00000000 (primary) ranges:
  68. [ 0.113744] MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
  69. [ 0.113755] MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
  70. [ 0.113764] IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
  71. [ 0.113782] 4xx PCI DMA offset set to 0x00000000
  72. [ 0.113786] 4xx PCI DMA window base to 0x0000000000000000
  73. [ 0.113791] DMA window size 0x0000000080000000
  74. [ 0.113814] PCIE0: successfully set as root-complex
  75. [ 0.114392] PCI: Probing PCI hardware
  76. [ 0.114526] PCI host bridge to bus 0000:40
  77. [ 0.114545] pci_bus 0000:40: root bus resource [io 0x0000-0xffff]
  78. [ 0.114556] pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff])
  79. [ 0.114566] pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff])
  80. [ 0.114576] pci_bus 0000:40: root bus resource [bus 40-ff]
  81. [ 0.114588] pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to ff
  82. [ 0.114623] pci 0000:40:00.0: [aaa0:bed0] type 01 class 0x060400
  83. [ 0.114655] pci 0000:40:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
  84. [ 0.114683] PCI: Hiding 4xx host bridge resources 0000:40:00.0
  85. [ 0.114983] pci 0000:41:00.0: [111d:803a] type 01 class 0x060400
  86. [ 0.115042] pci 0000:41:00.0: enabling Extended Tags
  87. [ 0.115117] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
  88. [ 0.115250] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
  89. [ 0.115268] pci 0000:40:00.0: bridge window [io 0x0000-0x0fff]
  90. [ 0.115275] pci 0000:40:00.0: bridge window [mem 0xe30000000-0xe302fffff]
  91. [ 0.115292] pci 0000:41:00.0: bridge configuration invalid ([bus 02-05]), reconfiguring
  92. [ 0.115442] pci 0000:42:02.0: [111d:803a] type 01 class 0x060400
  93. [ 0.115504] pci 0000:42:02.0: enabling Extended Tags
  94. [ 0.115589] pci 0000:42:02.0: PME# supported from D0 D3hot D3cold
  95. [ 0.115754] pci 0000:42:03.0: [111d:803a] type 01 class 0x060400
  96. [ 0.115813] pci 0000:42:03.0: enabling Extended Tags
  97. [ 0.115894] pci 0000:42:03.0: PME# supported from D0 D3hot D3cold
  98. [ 0.116046] pci 0000:42:04.0: [111d:803a] type 01 class 0x060400
  99. [ 0.116106] pci 0000:42:04.0: enabling Extended Tags
  100. [ 0.116189] pci 0000:42:04.0: PME# supported from D0 D3hot D3cold
  101. [ 0.116370] pci 0000:41:00.0: PCI bridge to [bus 42-7f]
  102. [ 0.116391] pci 0000:41:00.0: bridge window [mem 0xe30000000-0xe302fffff]
  103. [ 0.116416] pci 0000:42:02.0: bridge configuration invalid ([bus 03-03]), reconfiguring
  104. [ 0.116431] pci 0000:42:03.0: bridge configuration invalid ([bus 04-04]), reconfiguring
  105. [ 0.116459] pci 0000:42:04.0: bridge configuration invalid ([bus 05-05]), reconfiguring
  106. [ 0.116602] pci 0000:43:00.0: [168c:0030] type 00 class 0x028000
  107. [ 0.116651] pci 0000:43:00.0: reg 0x10: [mem 0xe30000000-0xe3001ffff 64bit]
  108. [ 0.116708] pci 0000:43:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref]
  109. [ 0.116812] pci 0000:43:00.0: supports D1
  110. [ 0.116818] pci 0000:43:00.0: PME# supported from D0 D1 D3hot
  111. [ 0.116955] pci 0000:42:02.0: PCI bridge to [bus 43-7f]
  112. [ 0.116977] pci 0000:42:02.0: bridge window [mem 0xe30000000-0xe300fffff]
  113. [ 0.117066] pci_bus 0000:43: busn_res: [bus 43-7f] end is updated to 43
  114. [ 0.117219] pci 0000:44:00.0: [168c:0033] type 00 class 0x028000
  115. [ 0.117267] pci 0000:44:00.0: reg 0x10: [mem 0xe30100000-0xe3011ffff 64bit]
  116. [ 0.117324] pci 0000:44:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref]
  117. [ 0.117439] pci 0000:44:00.0: supports D1
  118. [ 0.117444] pci 0000:44:00.0: PME# supported from D0 D1 D3hot
  119. [ 0.117603] pci 0000:42:03.0: PCI bridge to [bus 44-7f]
  120. [ 0.117625] pci 0000:42:03.0: bridge window [mem 0xe30100000-0xe301fffff]
  121. [ 0.117698] pci_bus 0000:44: busn_res: [bus 44-7f] end is updated to 44
  122. [ 0.117857] pci 0000:45:00.0: [1912:0015] type 00 class 0x0c0330
  123. [ 0.117924] pci 0000:45:00.0: reg 0x10: [mem 0xe30200000-0xe30201fff 64bit]
  124. [ 0.118154] pci 0000:45:00.0: PME# supported from D0 D3hot D3cold
  125. [ 0.118302] pci 0000:42:04.0: PCI bridge to [bus 45-7f]
  126. [ 0.118325] pci 0000:42:04.0: bridge window [mem 0xe30200000-0xe302fffff]
  127. [ 0.118398] pci_bus 0000:45: busn_res: [bus 45-7f] end is updated to 45
  128. [ 0.118411] pci_bus 0000:42: busn_res: [bus 42-7f] end is updated to 45
  129. [ 0.118428] pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to 7f
  130. [ 0.118441] pci 0000:40:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 256
  131. [ 0.118459] pci 0000:41:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
  132. [ 0.118492] pci 0000:42:02.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
  133. [ 0.118510] pci 0000:43:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
  134. [ 0.118525] pci 0000:42:03.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
  135. [ 0.118543] pci 0000:44:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
  136. [ 0.118558] pci 0000:42:04.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
  137. [ 0.118580] pci 0000:45:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
  138. [ 0.118673] pci 0000:40:00.0: disabling bridge window [io 0x0000-0xffffffffffffffff] to [bus 41-7f] (unused)
  139. [ 0.118698] pci 0000:40:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff]
  140. [ 0.118712] pci 0000:41:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff]
  141. [ 0.118725] pci 0000:42:02.0: BAR 8: assigned [mem 0xe00000000-0xe000fffff]
  142. [ 0.118734] pci 0000:42:03.0: BAR 8: assigned [mem 0xe00100000-0xe001fffff]
  143. [ 0.118743] pci 0000:42:04.0: BAR 8: assigned [mem 0xe00200000-0xe002fffff]
  144. [ 0.118756] pci 0000:43:00.0: BAR 0: assigned [mem 0xe00000000-0xe0001ffff 64bit]
  145. [ 0.118777] pci 0000:43:00.0: BAR 6: assigned [mem 0xe00020000-0xe0002ffff pref]
  146. [ 0.118786] pci 0000:42:02.0: PCI bridge to [bus 43]
  147. [ 0.118797] pci 0000:42:02.0: bridge window [mem 0xe00000000-0xe000fffff]
  148. [ 0.118812] pci 0000:44:00.0: BAR 0: assigned [mem 0xe00100000-0xe0011ffff 64bit]
  149. [ 0.118831] pci 0000:44:00.0: BAR 6: assigned [mem 0xe00120000-0xe0012ffff pref]
  150. [ 0.118839] pci 0000:42:03.0: PCI bridge to [bus 44]
  151. [ 0.118849] pci 0000:42:03.0: bridge window [mem 0xe00100000-0xe001fffff]
  152. [ 0.118864] pci 0000:45:00.0: BAR 0: assigned [mem 0xe00200000-0xe00201fff 64bit]
  153. [ 0.118887] pci 0000:42:04.0: PCI bridge to [bus 45]
  154. [ 0.118897] pci 0000:42:04.0: bridge window [mem 0xe00200000-0xe002fffff]
  155. [ 0.118908] pci 0000:41:00.0: PCI bridge to [bus 42-45]
  156. [ 0.118918] pci 0000:41:00.0: bridge window [mem 0xe00000000-0xe002fffff]
  157. [ 0.118930] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
  158. [ 0.118939] pci 0000:40:00.0: bridge window [mem 0xe00000000-0xe002fffff]
  159. [ 0.118950] pci_bus 0000:40: resource 4 [io 0x0000-0xffff]
  160. [ 0.118956] pci_bus 0000:40: resource 5 [mem 0xe00000000-0xe7fffffff]
  161. [ 0.118961] pci_bus 0000:40: resource 6 [mem 0xf00000000-0xf000fffff]
  162. [ 0.118967] pci_bus 0000:41: resource 1 [mem 0xe00000000-0xe002fffff]
  163. [ 0.118973] pci_bus 0000:42: resource 1 [mem 0xe00000000-0xe002fffff]
  164. [ 0.118979] pci_bus 0000:43: resource 1 [mem 0xe00000000-0xe000fffff]
  165. [ 0.118985] pci_bus 0000:44: resource 1 [mem 0xe00100000-0xe001fffff]
  166. [ 0.118990] pci_bus 0000:45: resource 1 [mem 0xe00200000-0xe002fffff]
  167. [ 0.127328] SCSI subsystem initialized
  168. [ 0.127722] libata version 3.00 loaded.
  169. [ 0.129211] clocksource: Switched to clocksource timebase
  170. [ 0.130119] NET: Registered protocol family 2
  171. [ 0.130549] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  172. [ 0.130576] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  173. [ 0.130598] TCP: Hash tables configured (established 2048 bind 2048)
  174. [ 0.130678] UDP hash table entries: 256 (order: 0, 4096 bytes)
  175. [ 0.130695] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  176. [ 0.130809] NET: Registered protocol family 1
  177. [ 0.130988] PCI: CLS 32 bytes, default 32
  178. [ 0.133358] OF: /plb/opb/gpio@ef600b00: could not find phandle
  179. [ 0.134610] dw_dmac 4bffd0800.dma: DesignWare DMA Controller, 2 channels
  180. [ 0.139511] Crashlog allocated RAM at address 0x3f00000
  181. [ 0.140004] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  182. [ 0.142960] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  183. [ 0.151356] io scheduler noop registered
  184. [ 0.151370] io scheduler deadline registered (default)
  185. [ 0.152865] pcieport 0000:40:00.0: request AER IRQ 0 failed
  186. [ 0.152899] aer: probe of 0000:40:00.0:pcie002 failed with error -22
  187. [ 0.152965] pcie_pme: probe of 0000:40:00.0:pcie001 failed with error -22
  188. [ 0.153070] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  189. [ 0.154875] console [ttyS0] disabled
  190. [ 0.154925] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 37, base_baud = 347222) is a TI16750
  191. [ 0.955128] console [ttyS0] enabled
  192. [ 0.959165] sata-dwc 4bffd1800.sata: id 0, controller version 1.91
  193. [ 0.966585] scsi host0: sata-dwc
  194. [ 0.970000] ata1: SATA max UDMA/133 irq 46
  195. [ 0.975237] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
  196. [ 0.981583] nand: Hynix H27U1G8F2BTR-BC
  197. [ 0.985407] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  198. [ 0.992966] Scanning device for bad blocks
  199. [ 1.052517] Bad eraseblock 908 at 0x000007180000
  200. [ 1.064338] 12 fixed-partitions partitions found on MTD device 4e4000000.ndfc.nand
  201. [ 1.071897] Creating 12 MTD partitions on "4e4000000.ndfc.nand":
  202. [ 1.077886] 0x000000000000-0x000008000000 : "NAND 128MiB 3,3V 8-bit"
  203. [ 1.085515] 0x000000000000-0x000000180000 : "uboot"
  204. [ 1.090802] 0x000000180000-0x0000001a0000 : "device-tree"
  205. [ 1.096621] 0x000000180000-0x000000500000 : "kernel"
  206. [ 1.102026] 0x000000500000-0x0000019e0000 : "ubi"
  207. [ 1.107281] 0x0000019e0000-0x000001a60000 : "config"
  208. [ 1.112647] 0x000001a60000-0x000001ae0000 : "pot"
  209. [ 1.117766] 0x000001ae0000-0x000001de0000 : "traffic_meter"
  210. [ 1.123776] 0x000001de0000-0x000001fa0000 : "language"
  211. [ 1.129359] 0x000001fa0000-0x000007fc0000 : "ecos"
  212. [ 1.135146] 0x000007fc0000-0x000008000000 : "wifi_data"
  213. [ 1.140790] 0x000000180000-0x0000019e0000 : "firmware"
  214. [ 1.146956] libphy: Fixed MDIO Bus: probed
  215. [ 1.151066] PPC 4xx OCP EMAC driver, version 3.54
  216. [ 1.156052] MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels
  217. [ 1.161783] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
  218. [ 1.168933] TAH /plb/opb/emac-tah@ef601350 initialized
  219. [ 1.174364] /plb/opb/emac-rgmii@ef601500: input 0 in rgmii mode
  220. [ 1.180378] libphy: emac_mdio: probed
  221. [ 1.190127] switch0: Atheros AR8327 rev. 4 switch registered on 4ef600c00.ethernet
  222. [ 1.302282] ata1: SATA link down (SStatus 0 SControl 300)
  223. [ 1.749838] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 20:e5:2a:55:be:18
  224. [ 1.756708] eth0: found Atheros AR8216/AR8236/AR8316 PHY (0x00)
  225. [ 1.762793] i2c /dev entries driver
  226. [ 1.766703] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
  227. [ 1.793355] booke_wdt: powerpc book-e watchdog driver loaded
  228. [ 1.801815] NET: Registered protocol family 10
  229. [ 1.807693] Segment Routing with IPv6
  230. [ 1.811429] NET: Registered protocol family 17
  231. [ 1.815892] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  232. [ 1.828803] 8021q: 802.1Q VLAN Support v1.8
  233. [ 1.835146] UBI: auto-attach mtd4
  234. [ 1.838488] ubi0: attaching mtd4
  235. [ 1.850692] UBI: EOF marker found, PEBs from 30 will be erased
  236. [ 1.856648] ubi0: scanning is finished
  237. [ 1.881942] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 115 LEBs
  238. [ 1.888946] ubi0: attached mtd4 (name "ubi", size 20 MiB)
  239. [ 1.894356] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
  240. [ 1.901204] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  241. [ 1.907882] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
  242. [ 1.914646] ubi0: good PEBs: 167, bad PEBs: 0, corrupted PEBs: 0
  243. [ 1.920625] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  244. [ 1.927816] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1794220303
  245. [ 1.936912] ubi0: available PEBs: 0, total reserved PEBs: 167, PEBs reserved for bad PEB handling: 20
  246. [ 1.946128] ubi0: background thread "ubi_bgt0d" started, PID 454
  247. [ 1.953173] block ubiblock0_0: created from ubi0:0(rootfs)
  248. [ 1.958666] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  249. [ 1.965602] hctosys: unable to open rtc device (rtc0)
  250. [ 2.002175] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  251. [ 2.009962] Freeing unused kernel memory: 180K
  252. [ 2.405277] init: Console is alive
  253. [ 2.408831] init: - watchdog -
  254. [ 3.080075] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  255. [ 3.125374] usbcore: registered new interface driver usbfs
  256. [ 3.130902] usbcore: registered new interface driver hub
  257. [ 3.136272] usbcore: registered new device driver usb
  258. [ 3.163455] irq: type mismatch, failed to map hwirq-20 for /interrupt-controller1!
  259. [ 3.171193] gpio-keys plb:opb:keys: failed to get irq for gpio:495
  260. [ 3.283309] dwc2 4bff80000.usbotg: DWC OTG Controller
  261. [ 3.288402] dwc2 4bff80000.usbotg: new USB bus registered, assigned bus number 1
  262. [ 3.295808] dwc2 4bff80000.usbotg: irq 42, io mem 0x4bff80000
  263. [ 3.302087] hub 1-0:1.0: USB hub found
  264. [ 3.306013] hub 1-0:1.0: 1 port detected
  265. [ 3.317588] xhci_hcd 0000:45:00.0: Resetting
  266. [ 3.417229] dwc2 4bff80000.usbotg: Overcurrent change detected
  267. [ 3.423115] dwc2 4bff80000.usbotg: Overcurrent change detected
  268. [ 4.385377] xhci_hcd 0000:45:00.0: xHCI Host Controller
  269. [ 4.390631] xhci_hcd 0000:45:00.0: new USB bus registered, assigned bus number 2
  270. [ 5.020093] xhci_hcd 0000:45:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000001000090
  271. [ 5.031675] hub 2-0:1.0: USB hub found
  272. [ 5.035614] hub 2-0:1.0: 2 ports detected
  273. [ 5.040016] xhci_hcd 0000:45:00.0: xHCI Host Controller
  274. [ 5.045259] xhci_hcd 0000:45:00.0: new USB bus registered, assigned bus number 3
  275. [ 5.052645] xhci_hcd 0000:45:00.0: Host supports USB 3.0 SuperSpeed
  276. [ 5.059320] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  277. [ 5.067852] hub 3-0:1.0: USB hub found
  278. [ 5.071792] hub 3-0:1.0: 2 ports detected
  279. [ 5.082452] usbcore: registered new interface driver usb-storage
  280. [ 5.088942] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  281. [ 5.098759] init: - preinit -
  282. [ 5.379308] eth0: link is up, 1000 FDX
  283. [ 5.383380] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  284. [ 5.389343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  285. [ 5.399606] usb 2-2: new high-speed USB device number 2 using xhci_hcd
  286. [ 5.413302] random: procd: uninitialized urandom read (4 bytes read)
  287. [ 5.563446] hub 2-2:1.0: USB hub found
  288. [ 5.567780] hub 2-2:1.0: 4 ports detected
  289. [ 5.665779] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
  290. [ 5.691612] hub 3-2:1.0: USB hub found
  291. [ 5.695911] hub 3-2:1.0: 4 ports detected
  292. [ 5.883219] usb 2-2.1: new high-speed USB device number 3 using xhci_hcd
  293. [ 5.977840] usb-storage 2-2.1:1.0: USB Mass Storage device detected
  294. [ 5.984506] scsi host1: usb-storage 2-2.1:1.0
  295. [ 7.010853] scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 0272 PQ: 0 ANSI: 0
  296. [ 7.169026] sd 1:0:0:0: [sda] 30318592 512-byte logical blocks: (15.5 GB/14.5 GiB)
  297. [ 7.177603] sd 1:0:0:0: [sda] Write Protect is off
  298. [ 7.182391] sd 1:0:0:0: [sda] Mode Sense: 0b 00 00 08
  299. [ 7.183400] sd 1:0:0:0: [sda] No Caching mode page found
  300. [ 7.188710] sd 1:0:0:0: [sda] Assuming drive cache: write through
  301. [ 7.199826] sda: sda1
  302. [ 7.205704] sd 1:0:0:0: [sda] Attached SCSI removable disk
  303. [ 8.511091] mount_root: loading kmods from internal overlay
  304. [ 8.527857] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  305. [ 8.535535] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  306. [ 9.256705] random: fast init done
  307. [ 9.405832] UBIFS (ubi0:1): default file-system created
  308. [ 9.415395] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 604
  309. [ 9.477927] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  310. [ 9.485762] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  311. [ 9.495637] UBIFS (ubi0:1): FS size: 13547520 bytes (12 MiB, 105 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
  312. [ 9.505953] UBIFS (ubi0:1): reserved for root: 639882 bytes (624 KiB)
  313. [ 9.512374] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1D3F5B48-9D1E-4499-8A16-B56CF3514D24, small LPT model
  314. [ 9.524541] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  315. [ 9.531616] block: unable to load configuration (fstab: Entry not found)
  316. [ 9.538367] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  317. [ 9.544884] block: unable to load configuration (fstab: Entry not found)
  318. [ 9.551626] block: attempting to load /etc/config/fstab
  319. [ 9.556966] block: unable to load configuration (fstab: Entry not found)
  320. [ 9.563708] block: no usable configuration
  321. [ 9.571708] UBIFS (ubi0:1): un-mount UBI device 0
  322. [ 9.576417] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
  323. [ 9.590341] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 606
  324. [ 9.655190] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  325. [ 9.663030] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  326. [ 9.672904] UBIFS (ubi0:1): FS size: 13547520 bytes (12 MiB, 105 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
  327. [ 9.683208] UBIFS (ubi0:1): reserved for root: 639882 bytes (624 KiB)
  328. [ 9.689631] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1D3F5B48-9D1E-4499-8A16-B56CF3514D24, small LPT model
  329. [ 10.470504] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  330. [ 10.477556] block: unable to load configuration (fstab: Entry not found)
  331. [ 10.484310] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
  332. [ 10.490834] block: unable to load configuration (fstab: Entry not found)
  333. [ 10.497576] block: attempting to load /etc/config/fstab
  334. [ 10.502878] block: unable to load configuration (fstab: Entry not found)
  335. [ 10.509614] block: no usable configuration
  336. [ 10.515020] mount_root: overlay filesystem has not been fully initialized yet
  337. [ 10.522473] mount_root: switching to ubifs overlay
  338. [ 10.553298] urandom-seed: Seed file not found (/etc/urandom.seed)
  339. [ 10.589840] procd: - early -
  340. [ 10.592809] procd: - watchdog -
  341. [ 11.169261] procd: - watchdog -
  342. [ 11.172714] procd: - ubus -
  343. [ 11.215372] random: ubusd: uninitialized urandom read (4 bytes read)
  344. [ 11.225579] random: ubusd: uninitialized urandom read (4 bytes read)
  345. [ 11.232192] random: ubusd: uninitialized urandom read (4 bytes read)
  346. [ 11.239145] procd: - init -
  347. [ 11.620533] kmodloader: loading kernel modules from /etc/modules.d/*
  348. [ 11.648289] urngd: v1.0.0 started.
  349. [ 11.663810] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  350. [ 11.708761] ip6_tables: (C) 2000-2006 Netfilter Core Team
  351. [ 11.727992] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
  352. [ 11.735570] Backport generated by backports.git v4.19.85-1-0-g8a8be258
  353. [ 11.762647] ip_tables: (C) 2000-2006 Netfilter Core Team
  354. [ 11.779628] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  355. [ 11.840462] random: crng init done
  356. [ 11.843873] random: 6 urandom warning(s) missed due to ratelimiting
  357. [ 11.855119] xt_time: kernel timezone is -0000
  358. [ 11.902995] PPP generic driver version 2.4.2
  359. [ 11.908841] NET: Registered protocol family 24
  360. [ 11.934658] ath9k 0000:43:00.0: Direct firmware load for pci_wmac1.eeprom failed with error -2
  361. [ 11.943262] ath9k 0000:43:00.0: Falling back to user helper
  362. [ 12.049375] ath: EEPROM regdomain: 0x0
  363. [ 12.049383] ath: EEPROM indicates default country code should be used
  364. [ 12.049385] ath: doing EEPROM country->regdmn map search
  365. [ 12.049395] ath: country maps to regdmn code: 0x3a
  366. [ 12.049398] ath: Country alpha2 being used: US
  367. [ 12.049400] ath: Regpair used: 0x3a
  368. [ 12.060625] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  369. [ 12.061922] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xd5aa0000, irq=19
  370. [ 12.070097] ath9k 0000:44:00.0: Direct firmware load for pci_wmac0.eeprom failed with error -2
  371. [ 12.078705] ath9k 0000:44:00.0: Falling back to user helper
  372. [ 12.364598] ath: EEPROM regdomain: 0x0
  373. [ 12.364605] ath: EEPROM indicates default country code should be used
  374. [ 12.364607] ath: doing EEPROM country->regdmn map search
  375. [ 12.364617] ath: country maps to regdmn code: 0x3a
  376. [ 12.364620] ath: Country alpha2 being used: US
  377. [ 12.364622] ath: Regpair used: 0x3a
  378. [ 12.375827] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  379. [ 12.377119] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xd5ae0000, irq=20
  380. [ 12.406120] kmodloader: done loading kernel modules from /etc/modules.d/*
  381. [ 24.870182] eth0: link is up, 1000 FDX
  382. [ 24.891553] br-lan: port 1(eth0.1) entered blocking state
  383. [ 24.896965] br-lan: port 1(eth0.1) entered disabled state
  384. [ 24.902570] device eth0.1 entered promiscuous mode
  385. [ 24.907359] device eth0 entered promiscuous mode
  386. [ 24.965954] br-lan: port 1(eth0.1) entered blocking state
  387. [ 24.971362] br-lan: port 1(eth0.1) entered forwarding state
  388. [ 24.977018] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  389. [ 25.889478] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!