API tools faq
paste
Guest User

dmseg

a guest
Nov 22nd, 2025
30
0
363 days
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.96 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 6.17.4 (chewitt@toolbox) (aarch64-libreelec-linux-gnu-gcc-15.2.0 (GCC) 15.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP Tue Oct 21 13:14:10 UTC 2025
  3. [ 0.000000] KASLR disabled due to lack of seed
  4. [ 0.000000] Machine model: Amlogic Meson GXBB P201 Development Board
  5. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  6. [ 0.000000] OF: reserved mem: failed to allocate memory for node 'linux,cma': size 896 MiB
  7. [ 0.000000] OF: reserved mem: 0x0000000000000000..0x0000000000ffffff (16384 KiB) nomap non-reusable hwrom@0
  8. [ 0.000000] OF: reserved mem: 0x0000000010000000..0x00000000101fffff (2048 KiB) nomap non-reusable secmon@10000000
  9. [ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000
  10. [ 0.000000] OF: reserved mem: 0x0000000005300000..0x00000000072fffff (32768 KiB) nomap non-reusable secmon@5300000
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff]
  13. [ 0.000000] DMA32 empty
  14. [ 0.000000] Normal empty
  15. [ 0.000000] Movable zone start for each node
  16. [ 0.000000] Early memory node ranges
  17. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
  18. [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
  19. [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
  20. [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
  21. [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
  22. [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000037ffffff]
  23. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff]
  24. [ 0.000000] cma: Reserved 256 MiB at 0x0000000027000000
  25. [ 0.000000] psci: probing for conduit method from DT.
  26. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  27. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  28. [ 0.000000] psci: Trusted OS migration not required
  29. [ 0.000000] percpu: Embedded 22 pages/cpu s51032 r8192 d30888 u90112
  30. [ 0.000000] pcpu-alloc: s51032 r8192 d30888 u90112 alloc=22*4096
  31. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. [ 0.000000] Detected VIPT I-cache on CPU0
  33. [ 0.000000] CPU features: detected: ARM erratum 843419
  34. [ 0.000000] CPU features: detected: ARM erratum 845719
  35. [ 0.000000] alternatives: applying boot alternatives
  36. [ 0.000000] Kernel command line: boot=UUID=2110-1443 disk=UUID=02655f41-ee5e-46e1-9f3a-764c543fb4c8 quiet systemd.debug_shell=ttyAML0 console=ttyAML0,115200n8 console=tty0 mac=00:24:68:D5:CD:17
  37. [ 0.000000] Unknown kernel command line parameters "boot=UUID=2110-1443 disk=UUID=02655f41-ee5e-46e1-9f3a-764c543fb4c8 mac=00:24:68:D5:CD:17", will be passed to user space.
  38. [ 0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
  39. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  40. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  41. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
  42. [ 0.000000] software IO TLB: area num 4.
  43. [ 0.000000] software IO TLB: mapped [mem 0x0000000026d28000-0x0000000026e28000] (1MB)
  44. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 229376
  45. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  46. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  47. [ 0.000000] rcu: Hierarchical RCU implementation.
  48. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  49. [ 0.000000] Tracing variant of Tasks RCU enabled.
  50. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  51. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  52. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  53. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  54. [ 0.000000] Root IRQ handler: gic_handle_irq
  55. [ 0.000000] GIC: Using split EOI/Deactivate mode
  56. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  57. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  58. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  59. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  60. [ 0.000218] Console: colour dummy device 80x25
  61. [ 0.000228] printk: legacy console [tty0] enabled
  62. [ 0.000296] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  63. [ 0.000307] pid_max: default: 32768 minimum: 301
  64. [ 0.000414] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  65. [ 0.000426] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  66. [ 0.001959] rcu: Hierarchical SRCU implementation.
  67. [ 0.001971] rcu: Max phase no-delay instances is 1000.
  68. [ 0.002127] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  69. [ 0.002643] smp: Bringing up secondary CPUs ...
  70. [ 0.003112] Detected VIPT I-cache on CPU1
  71. [ 0.003234] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  72. [ 0.003731] Detected VIPT I-cache on CPU2
  73. [ 0.003806] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  74. [ 0.004293] Detected VIPT I-cache on CPU3
  75. [ 0.004364] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  76. [ 0.004413] smp: Brought up 1 node, 4 CPUs
  77. [ 0.004422] SMP: Total of 4 processors activated.
  78. [ 0.004427] CPU: All CPU(s) started at EL2
  79. [ 0.004430] CPU features: detected: 32-bit EL0 Support
  80. [ 0.004435] CPU features: detected: CRC32 instructions
  81. [ 0.004465] alternatives: applying system-wide alternatives
  82. [ 0.005108] Memory: 550952K/917504K available (13248K kernel code, 1916K rwdata, 5208K rodata, 6592K init, 752K bss, 101456K reserved, 262144K cma-reserved)
  83. [ 0.005662] devtmpfs: initialized
  84. [ 0.009957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  85. [ 0.010022] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
  86. [ 0.010085] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
  87. [ 0.013473] 25792 pages in range for non-PLT usage
  88. [ 0.013490] 517312 pages in range for PLT usage
  89. [ 0.013587] pinctrl core: initialized pinctrl subsystem
  90. [ 0.014443] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  91. [ 0.015106] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  92. [ 0.015174] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  93. [ 0.015267] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  94. [ 0.015624] thermal_sys: Registered thermal governor 'step_wise'
  95. [ 0.015658] cpuidle: using governor menu
  96. [ 0.015739] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  97. [ 0.015798] ASID allocator initialised with 65536 entries
  98. [ 0.018768] /soc/interrupt-controller@c4301000: Fixed dependency cycle(s) with /soc/interrupt-controller@c4301000
  99. [ 0.018908] /soc/vpu@d0100000: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  100. [ 0.018927] /soc/hdmi-tx@c883a000: Fixed dependency cycle(s) with /soc/vpu@d0100000
  101. [ 0.022505] /soc/vpu@d0100000: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  102. [ 0.022633] /soc/vpu@d0100000: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  103. [ 0.022675] /soc/hdmi-tx@c883a000: Fixed dependency cycle(s) with /soc/vpu@d0100000
  104. [ 0.024226] /soc/vpu@d0100000: Fixed dependency cycle(s) with /cvbs-connector
  105. [ 0.024278] /cvbs-connector: Fixed dependency cycle(s) with /soc/vpu@d0100000
  106. [ 0.024384] /soc/hdmi-tx@c883a000: Fixed dependency cycle(s) with /hdmi-connector
  107. [ 0.024432] /hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  108. [ 0.026285] iommu: Default domain type: Translated
  109. [ 0.026298] iommu: DMA domain TLB invalidation policy: strict mode
  110. [ 0.027004] SCSI subsystem initialized
  111. [ 0.027154] usbcore: registered new interface driver usbfs
  112. [ 0.027182] usbcore: registered new interface driver hub
  113. [ 0.027211] usbcore: registered new device driver usb
  114. [ 0.027460] mc: Linux media interface: v0.10
  115. [ 0.027482] videodev: Linux video capture interface: v2.00
  116. [ 0.027550] pps_core: LinuxPPS API ver. 1 registered
  117. [ 0.027554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  118. [ 0.027841] Advanced Linux Sound Architecture Driver Initialized.
  119. [ 0.028446] vgaarb: loaded
  120. [ 0.028681] clocksource: Switched to clocksource arch_sys_counter
  121. [ 0.029044] netfs: FS-Cache loaded
  122. [ 0.033652] NET: Registered PF_INET protocol family
  123. [ 0.033798] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  124. [ 0.034652] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  125. [ 0.034670] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  126. [ 0.034685] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  127. [ 0.034784] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
  128. [ 0.034972] TCP: Hash tables configured (established 8192 bind 8192)
  129. [ 0.035069] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)
  130. [ 0.035102] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)
  131. [ 0.035250] NET: Registered PF_UNIX/PF_LOCAL protocol family
  132. [ 0.035650] RPC: Registered named UNIX socket transport module.
  133. [ 0.035655] RPC: Registered udp transport module.
  134. [ 0.035659] RPC: Registered tcp transport module.
  135. [ 0.035662] RPC: Registered tcp-with-tls transport module.
  136. [ 0.035665] RPC: Registered tcp NFSv4.1 backchannel transport module.
  137. [ 0.035678] PCI: CLS 0 bytes, default 64
  138. [ 0.039514] Initialise system trusted keyrings
  139. [ 0.040059] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  140. [ 0.040616] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  141. [ 0.041164] NFS: Registering the id_resolver key type
  142. [ 0.041208] Key type id_resolver registered
  143. [ 0.041213] Key type id_legacy registered
  144. [ 0.041242] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  145. [ 0.041247] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  146. [ 0.042132] Key type cifs.idmap registered
  147. [ 0.043569] cryptd: max_cpu_qlen set to 1000
  148. [ 0.086153] NET: Registered PF_ALG protocol family
  149. [ 0.086179] Key type asymmetric registered
  150. [ 0.086184] Asymmetric key parser 'x509' registered
  151. [ 0.086277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  152. [ 0.086445] io scheduler mq-deadline registered
  153. [ 0.086450] io scheduler kyber registered
  154. [ 0.086835] irq_meson_gpio: 133 to 8 gpio interrupt mux initialized
  155. [ 0.091453] ledtrig-cpu: registered to indicate activity on CPUs
  156. [ 0.096760] soc soc0: Amlogic Meson GXBB (S905M) Revision 1f:b (22:1) Detected
  157. [ 0.098380] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart
  158. [ 0.098413] printk: legacy console [ttyAML0] enabled
  159. [ 0.101755] random: crng init done
  160. [ 0.108073] brd: module loaded
  161. [ 0.108155] loop: module loaded
  162. [ 0.122700] tun: Universal TUN/TAP device driver, 1.6
  163. [ 0.123235] usbcore: registered new interface driver rtl8150
  164. [ 0.123254] usbcore: registered new device driver r8152-cfgselector
  165. [ 0.123287] usbcore: registered new interface driver r8152
  166. [ 0.124349] usbcore: registered new interface driver uas
  167. [ 0.124380] usbcore: registered new interface driver usb-storage
  168. [ 0.124399] usbcore: registered new device driver onboard-usb-dev
  169. [ 0.124771] mousedev: PS/2 mouse device common for all mice
  170. [ 0.125076] i2c_dev: i2c /dev entries driver
  171. [ 0.127534] meson-sm: secure-monitor enabled
  172. [ 0.127806] hid: raw HID events driver (C) Jiri Kosina
  173. [ 0.127916] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
  174. [ 0.127943] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  175. [ 0.129109] usbcore: registered new interface driver usbhid
  176. [ 0.129125] usbhid: USB HID core driver
  177. [ 0.129606] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  178. [ 0.133037] Initializing XFRM netlink socket
  179. [ 0.133116] NET: Registered PF_INET6 protocol family
  180. [ 0.133760] Segment Routing with IPv6
  181. [ 0.133785] In-situ OAM (IOAM) with IPv6
  182. [ 0.133827] NET: Registered PF_PACKET protocol family
  183. [ 0.133903] Key type dns_resolver registered
  184. [ 0.140086] Loading compiled-in X.509 certificates
  185. [ 0.155668] meson-drm d0100000.vpu: Queued 2 outputs on vpu
  186. [ 0.156734] stackdepot: allocating hash table of 65536 entries via kvcalloc
  187. [ 0.157402] stackdepot: allocating space for 8192 stack pools via kvcalloc
  188. [ 0.178769] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  189. [ 0.179177] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  190. [ 0.179469] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
  191. [ 0.179982] [drm] Initialized meson 1.0.0 for d0100000.vpu on minor 0
  192. [ 0.223335] mmc2: Failed to initialize a non-removable card
  193. [ 0.223349] mmc1: Failed to initialize a non-removable card
  194. [ 0.760737] Console: switching to colour frame buffer device 240x67
  195. [ 0.781727] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
  196. [ 0.782758] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
  197. [ 0.782769] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
  198. [ 0.782776] meson8b-dwmac c9410000.ethernet: IRQ sfty not found
  199. [ 0.782852] meson8b-dwmac c9410000.ethernet: Deprecated MDIO bus assumption used
  200. [ 0.782900] meson8b-dwmac c9410000.ethernet: PTP uses main clock
  201. [ 0.783992] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  202. [ 0.784008] meson8b-dwmac c9410000.ethernet: DWMAC1000
  203. [ 0.784015] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
  204. [ 0.784021] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
  205. [ 0.784026] meson8b-dwmac c9410000.ethernet: COE Type 2
  206. [ 0.784032] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
  207. [ 0.784037] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
  208. [ 0.784098] meson8b-dwmac c9410000.ethernet: Normal descriptors
  209. [ 0.784104] meson8b-dwmac c9410000.ethernet: Ring mode enabled
  210. [ 0.784110] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  211. [ 0.784122] meson8b-dwmac c9410000.ethernet: device MAC address 62:1d:6b:a9:92:60
  212. [ 1.821542] ICPlus IP101G stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  213. [ 1.822867] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
  214. [ 1.822947] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
  215. [ 1.875454] dwc2 c9100000.usb: DWC OTG Controller
  216. [ 1.875476] dwc2 c9100000.usb: new USB bus registered, assigned bus number 1
  217. [ 1.875498] dwc2 c9100000.usb: irq 26, io mem 0xc9100000
  218. [ 1.875648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17
  219. [ 1.875657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  220. [ 1.875663] usb usb1: Product: DWC OTG Controller
  221. [ 1.875669] usb usb1: Manufacturer: Linux 6.17.4 dwc2_hsotg
  222. [ 1.875675] usb usb1: SerialNumber: c9100000.usb
  223. [ 1.876496] hub 1-0:1.0: USB hub found
  224. [ 1.876520] hub 1-0:1.0: 1 port detected
  225. [ 1.877976] meson-gx-mmc d0072000.mmc: Got CD GPIO
  226. [ 1.878644] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  227. [ 1.889283] gx-sound-card sound: workaround: internal PCM chmap controls mapped to device 0
  228. [ 1.894069] dwc2 c9000000.usb: supply vusb_d not found, using dummy regulator
  229. [ 1.894281] dwc2 c9000000.usb: supply vusb_a not found, using dummy regulator
  230. [ 1.909727] dwc2 c9000000.usb: DWC OTG Controller
  231. [ 1.909950] dwc2 c9000000.usb: new USB bus registered, assigned bus number 2
  232. [ 1.910186] dwc2 c9000000.usb: irq 28, io mem 0xc9000000
  233. [ 1.911693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17
  234. [ 1.911816] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  235. [ 1.911915] usb usb2: Product: DWC OTG Controller
  236. [ 1.911999] usb usb2: Manufacturer: Linux 6.17.4 dwc2_hsotg
  237. [ 1.912217] usb usb2: SerialNumber: c9000000.usb
  238. [ 1.913209] hub 2-0:1.0: USB hub found
  239. [ 1.913242] hub 2-0:1.0: 1 port detected
  240. [ 1.914116] netconsole: network logging started
  241. [ 1.914273] clk: Disabling unused clocks
  242. [ 1.914523] PM: genpd: Disabling unused power domains
  243. [ 1.914550] ALSA device list:
  244. [ 1.914556] #0: P201
  245. [ 1.918428] Freeing unused kernel memory: 6592K
  246. [ 1.918570] Run /init as init process
  247. [ 1.918578] with arguments:
  248. [ 1.918585] /init
  249. [ 1.918591] with environment:
  250. [ 1.918598] HOME=/
  251. [ 1.918604] TERM=linux
  252. [ 1.918610] boot=UUID=2110-1443
  253. [ 1.918616] disk=UUID=02655f41-ee5e-46e1-9f3a-764c543fb4c8
  254. [ 1.918623] mac=00:24:68:D5:CD:17
  255. [ 1.986657] Checking disk(s): UUID=2110-1443 UUID=02655f41-ee5e-46e1-9f3a-764c543fb4c8
  256. [ 2.121195] mmc0: new UHS-I speed SDR50 SDXC card at address 0001
  257. [ 2.123456] mmcblk0: mmc0:0001 SD128 116 GiB
  258. [ 2.127040] mmcblk0: p1 p2
  259. [ 2.158927] usb 1-1: new high-speed USB device number 2 using dwc2
  260. [ 2.343356] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  261. [ 2.343410] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  262. [ 2.343449] usb 1-1: Product: USB 2.0 Hub
  263. [ 2.345113] hub 1-1:1.0: USB hub found
  264. [ 2.345333] hub 1-1:1.0: 4 ports detected
  265. [ 2.732090] usb 1-1.2: new full-speed USB device number 3 using dwc2
  266. [ 2.867371] fsck: fsck.fat 4.2 (2021-01-31)
  267. [ 2.867561] fsck: /dev/mmcblk0p1: 102 files, 20145/65501 clusters
  268. [ 2.867759] fsck: STORAGE: clean, 918/7602176 files, 626259/30403584 blocks
  269. [ 2.933381] usb 1-1.2: New USB device found, idVendor=0a05, idProduct=7211, bcdDevice= 1.00
  270. [ 2.933408] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  271. [ 2.933416] usb 1-1.2: Product: USB2.0 HUB
  272. [ 2.934030] hub 1-1.2:1.0: USB hub found
  273. [ 2.934223] hub 1-1.2:1.0: 4 ports detected
  274. [ 3.080435] loop0: detected capacity change from 0 to 285840
  275. [ 3.115404] usb 1-1.3: new high-speed USB device number 4 using dwc2
  276. [ 3.320173] usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
  277. [ 3.320223] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  278. [ 3.320243] usb 1-1.3: Product: 802.11 n WLAN
  279. [ 3.320260] usb 1-1.3: Manufacturer: MediaTek
  280. [ 3.320277] usb 1-1.3: SerialNumber: 1.0
  281. [ 3.390684] EXT4-fs (mmcblk0p2): mounted filesystem 02655f41-ee5e-46e1-9f3a-764c543fb4c8 r/w with ordered data mode. Quota mode: disabled.
  282. [ 3.518771] usb 1-1.2.1: new low-speed USB device number 5 using dwc2
  283. [ 3.633035] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
  284. [ 3.633239] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  285. [ 3.633339] usb 1-1.2.1: Product: Usb Mouse
  286. [ 3.633423] usb 1-1.2.1: Manufacturer: SIGMACHIP
  287. [ 3.639405] input: SIGMACHIP Usb Mouse as /devices/platform/soc/c9100000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0048.0001/input/input0
  288. [ 3.639811] hid-generic 0003:1C4F:0048.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-c9100000.usb-1.2.1/input0
  289. [ 3.671049] kernel-overlays-setup: setup base modules
  290. [ 3.732068] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/6.17.4
  291. [ 3.760622] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  292. [ 3.762791] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  293. [ 3.764680] kernel-overlays-setup: done
  294. [ 4.310963] systemd[1]: System time advanced to built-in epoch: Mon 2025-10-13 15:01:55 UTC
  295. [ 4.669285] systemd[1]: systemd 258.1 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA +IPE -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBCRYPTSETUP_PLUGINS -LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB -ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +SYSVINIT -LIBARCHIVE)
  296. [ 4.669356] systemd[1]: Detected architecture arm64.
  297. [ 5.112667] systemd[1]: Queued start job for default target kodi.target.
  298. [ 5.174987] systemd[1]: Created slice system-modprobe.slice.
  299. [ 5.176923] systemd[1]: Created slice user.slice.
  300. [ 5.177216] systemd[1]: Started systemd-ask-password-console.path.
  301. [ 5.177386] systemd[1]: Started systemd-ask-password-wall.path.
  302. [ 5.177562] systemd[1]: Reached target paths.target.
  303. [ 5.177661] systemd[1]: Reached target slices.target.
  304. [ 5.191911] systemd[1]: Listening on rpcbind.socket.
  305. [ 5.192200] systemd[1]: Reached target rpcbind.target.
  306. [ 5.201221] systemd[1]: Listening on systemd-ask-password.socket.
  307. [ 5.206819] systemd[1]: Listening on systemd-creds.socket.
  308. [ 5.213789] systemd[1]: Listening on systemd-factory-reset.socket.
  309. [ 5.214275] systemd[1]: Listening on systemd-journald-dev-log.socket.
  310. [ 5.214646] systemd[1]: Listening on systemd-journald.socket.
  311. [ 5.215025] systemd[1]: Listening on systemd-udevd-control.socket.
  312. [ 5.215235] systemd[1]: Listening on systemd-udevd-kernel.socket.
  313. [ 5.215598] systemd[1]: Listening on systemd-udevd-varlink.socket.
  314. [ 5.215877] systemd[1]: Listening on systemd-userdbd.socket.
  315. [ 5.229053] systemd[1]: Mounting dev-mqueue.mount...
  316. [ 5.232757] systemd[1]: Mounting sys-kernel-debug.mount...
  317. [ 5.233314] systemd[1]: sys-kernel-tracing.mount was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
  318. [ 5.237279] systemd[1]: Mounting var.mount...
  319. [ 5.245946] systemd[1]: Started debug-shell.service.
  320. [ 5.264611] systemd[1]: Starting kmod-static-nodes.service...
  321. [ 5.269267] systemd[1]: Starting machine-id.service...
  322. [ 5.269505] systemd[1]: [email protected] was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs).
  323. [ 5.274196] systemd[1]: Mounting sys-kernel-config.mount...
  324. [ 5.274499] systemd[1]: [email protected] was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
  325. [ 5.286321] systemd[1]: Starting [email protected]...
  326. [ 5.296988] systemd[1]: Starting show-version.service...
  327. [ 5.303602] systemd[1]: Starting storage-log.service...
  328. [ 5.313736] systemd[1]: Starting swap.service...
  329. [ 5.343722] systemd[1]: Starting systemd-hwdb-update.service...
  330. [ 5.444658] fuse: init (API version 7.44)
  331. [ 5.453198] systemd[1]: Starting systemd-modules-load.service...
  332. [ 5.457380] systemd[1]: Starting systemd-timesyncd-setup.service...
  333. [ 5.467960] systemd[1]: Starting systemd-udev-load-credentials.service...
  334. [ 5.492375] systemd[1]: Starting systemd-udev-trigger.service...
  335. [ 5.496838] systemd[1]: Starting wait-time-sync.service...
  336. [ 5.516038] systemd[1]: Mounted dev-mqueue.mount.
  337. [ 5.516923] systemd[1]: Mounted sys-kernel-debug.mount.
  338. [ 5.517781] systemd[1]: Mounted var.mount.
  339. [ 5.519354] systemd[1]: Finished kmod-static-nodes.service.
  340. [ 5.521643] systemd[1]: Finished machine-id.service.
  341. [ 5.523265] systemd[1]: Mounted sys-kernel-config.mount.
  342. [ 5.524540] systemd[1]: [email protected]: Deactivated successfully.
  343. [ 5.525474] systemd[1]: Finished [email protected].
  344. [ 5.539090] systemd[1]: Mounting sys-fs-fuse-connections.mount...
  345. [ 5.574353] systemd[1]: Starting systemd-journald.service...
  346. [ 5.593304] Asymmetric key parser 'pkcs8' registered
  347. [ 5.599087] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service...
  348. [ 5.611555] systemd[1]: Finished systemd-modules-load.service.
  349. [ 5.613548] systemd[1]: Finished systemd-timesyncd-setup.service.
  350. [ 5.623864] systemd[1]: Finished systemd-udev-load-credentials.service.
  351. [ 5.628289] systemd[1]: Finished storage-log.service.
  352. [ 5.631542] systemd[1]: Finished show-version.service.
  353. [ 5.636433] systemd[1]: Mounted sys-fs-fuse-connections.mount.
  354. [ 5.638196] systemd[1]: var-log.mount was skipped because no trigger condition checks were met.
  355. [ 5.643920] systemd[1]: Starting systemd-sysctl.service...
  356. [ 5.669274] systemd-journald[237]: Collecting audit messages is disabled.
  357. [ 5.769346] systemd[1]: Starting systemd-userdbd.service...
  358. [ 5.770034] systemd[1]: Started systemd-journald.service.
  359. [ 5.881650] systemd-journald[237]: Received client request to flush runtime journal.
  360. [ 9.352422] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  361. [ 9.414346] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [ICPlus IP101G] (irq=POLL)
  362. [ 9.429750] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
  363. [ 9.429787] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
  364. [ 9.432181] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
  365. [ 9.679399] stmmac: wakeup enable
  366. [ 9.799461] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  367. [ 9.842884] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  368. [ 9.843648] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  369. [ 10.231421] meson-vrtc c81000a8.rtc: registered as rtc0
  370. [ 10.231498] meson-vrtc c81000a8.rtc: setting system clock to 2025-10-13T15:02:00 UTC (1760367720)
  371. [ 10.233526] systemd-journald[237]: Time jumped backwards, rotating.
  372. [ 10.250414] Registered IR keymap rc-empty
  373. [ 10.252939] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
  374. [ 10.264397] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  375. [ 10.264574] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input1
  376. [ 10.266809] rc rc0: sw decoder init
  377. [ 10.266885] meson-ir c8100580.ir: receiver initialized
  378. [ 10.482744] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
  379. [ 10.482830] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
  380. [ 10.482897] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
  381. [ 10.482963] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
  382. [ 10.483005] lima d00c0000.gpu: l2_cache0 8K, 4-way, 64byte cache line, 128bit external bus
  383. [ 10.483019] lima d00c0000.gpu: l2_cache1 64K, 4-way, 64byte cache line, 128bit external bus
  384. [ 10.485061] lima d00c0000.gpu: bus rate = 166666667
  385. [ 10.485096] lima d00c0000.gpu: mod rate = 24000000
  386. [ 10.485225] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
  387. [ 10.507378] [drm] Initialized lima 1.1.0 for d00c0000.gpu on minor 1
  388. [ 10.545412] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
  389. [ 10.638800] usb 1-1.3: reset high-speed USB device number 4 using dwc2
  390. [ 10.825177] mt7601u 1-1.3:1.0: ASIC revision: 76010001 MAC revision: 76010500
  391. [ 10.826779] mt7601u 1-1.3:1.0: Direct firmware load for mt7601u.bin failed with error -2
  392. [ 10.827498] mt7601u 1-1.3:1.0: probe with driver mt7601u failed with error -2
  393. [ 10.827671] usbcore: registered new interface driver mt7601u
  394. [ 10.858357] Bluetooth: Core ver 2.22
  395. [ 10.858488] NET: Registered PF_BLUETOOTH protocol family
  396. [ 10.858496] Bluetooth: HCI device and connection manager initialized
  397. [ 10.859088] Bluetooth: HCI socket layer initialized
  398. [ 10.859119] Bluetooth: L2CAP socket layer initialized
  399. [ 10.859147] Bluetooth: SCO socket layer initialized
  400. [ 10.878470] IR NEC protocol handler initialized
  401. [ 10.912928] IR RC6 protocol handler initialized
  402. [ 11.004374] input: eventlircd as /devices/virtual/input/input2
  403. [ 12.479928] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  404. [ 12.497913] 8021q: 802.1Q VLAN Support v1.8
  405. [ 289.308760] rc rc0: two consecutive events of type space
  406.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!