API tools faq
paste
Guest User

Kernel Boot Failure

a guest
Feb 6th, 2023
32
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.84 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2021.04-lf_v2021.04+g263b27e076 (Nov 22 2021 - 01:39:23 +0000)
  2.  
  3. CPU: i.MX6ULL rev1.1 900 MHz (running at 396 MHz)
  4. CPU: Commercial temperature grade (0C to 95C) at 39C
  5. Reset cause: POR
  6. Model: i.MX6 ULL 14x14 EVK Board
  7. Board: MX6ULL 14x14 EVK
  8. DRAM: 512 MiB
  9. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  10. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  11.  
  12. [*]-Video Link 0 (480 x 272)
  13. [0] lcdif@21c8000, video
  14. In: serial
  15. Out: serial
  16. Err: serial
  17. switch to partitions #0, OK
  18. mmc1 is current device
  19. flash target is MMC:1
  20. Net: eth1: ethernet@20b4000 [PRIME]Get shared mii bus on ethernet@2188000
  21. , eth0: ethernet@2188000
  22. Fastboot: Normal
  23. Normal Boot
  24. Hit any key to stop autoboot: 0
  25. => load mmc 1 0x82000000 swupdate-image-imx6ull14x14evk-20230206204748.rootfs.ext4.gz.u-boot
  26. 8992560 bytes read in 385 ms (22.3 MiB/s)
  27. => load mmc 1 0x82a00000 imx6ull-14x14-evk.dtb
  28. 35732 bytes read in 4 ms (8.5 MiB/s)
  29. => load mmc 1 0x83000000 zImage
  30. 6559608 bytes read in 282 ms (22.2 MiB/s)
  31. => bootz 0x83000000 0x82000000 0x82a00000
  32. Kernel image @ 0x83000000 [ 0x000000 - 0x641778 ]
  33. ## Loading init Ramdisk from Legacy Image at 82000000 ...
  34. Image Name: swupdate-image-imx6ull14x14evk-2
  35. Image Type: ARM Linux RAMDisk Image (uncompressed)
  36. Data Size: 8992496 Bytes = 8.6 MiB
  37. Load Address: 00000000
  38. Entry Point: 00000000
  39. Verifying Checksum ... OK
  40. ## Flattened Device Tree blob at 82a00000
  41. Booting using the fdt blob at 0x82a00000
  42. Using Device Tree in place at 82a00000, end 82a0bb93
  43. Modify /soc/bus@2200000/epdc@228c000 disabled
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0
  48. [ 0.000000] Linux version 5.10.72-lts-5.10.y+ga98ad3d576bb (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP PREEMPT Tue Nov 23 06:02:20 UTC 2021
  49. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  50. [ 0.000000] CPU: div instructions available: patching division code
  51. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  52. [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 ULL 14x14 EVK Board
  53. [ 0.000000] Memory policy: Data cache writealloc
  54. [ 0.000000] Reserved memory: created CMA memory pool at 0x96000000, size 160 MiB
  55. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  56. [ 0.000000] Zone ranges:
  57. [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff]
  58. [ 0.000000] HighMem empty
  59. [ 0.000000] Movable zone start for each node
  60. [ 0.000000] Early memory node ranges
  61. [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff]
  62. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
  63. [ 0.000000] percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
  64. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
  65. [ 0.000000] Kernel command line: noinitrd console=ttymxc0,115200
  66. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  67. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  68. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  69. [ 0.000000] Memory: 331216K/524288K available (9216K kernel code, 1169K rwdata, 2144K rodata, 1024K init, 424K bss, 29232K reserved, 163840K cma-reserved, 0K highmem)
  70. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  71. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  72. [ 0.000000] rcu: RCU event tracing is enabled.
  73. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  74. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  75. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  76. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  77. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  78. [ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x4e4 with crng_init=0
  79. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  80. [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  81. [ 0.000063] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  82. [ 0.002952] Console: colour dummy device 80x30
  83. [ 0.003034] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  84. [ 0.003083] pid_max: default: 32768 minimum: 301
  85. [ 0.003425] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  86. [ 0.003466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  87. [ 0.005225] CPU: Testing write buffer coherency: ok
  88. [ 0.005779] CPU0: update cpu_capacity 1024
  89. [ 0.005820] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  90. [ 0.007379] Setting up static identity map for 0x80100000 - 0x80100060
  91. [ 0.007686] rcu: Hierarchical SRCU implementation.
  92. [ 0.008440] smp: Bringing up secondary CPUs ...
  93. [ 0.008482] smp: Brought up 1 node, 1 CPU
  94. [ 0.008510] SMP: Total of 1 processors activated (48.00 BogoMIPS).
  95. [ 0.008529] CPU: All CPU(s) started in SVC mode.
  96. [ 0.009412] devtmpfs: initialized
  97. [ 0.025647] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  98. [ 0.026273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  99. [ 0.026331] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
  100. [ 0.039079] pinctrl core: initialized pinctrl subsystem
  101. [ 0.041824] NET: Registered protocol family 16
  102. [ 0.059530] DMA: preallocated 256 KiB pool for atomic coherent allocations
  103. [ 0.062569] thermal_sys: Registered thermal governor 'step_wise'
  104. [ 0.062959] cpuidle: using governor menu
  105. [ 0.381826] vdd3p0: supplied by regulator-dummy
  106. [ 0.396882] cpu: supplied by regulator-dummy
  107. [ 0.412316] vddsoc: supplied by regulator-dummy
  108. [ 1.041037] No ATAGs?
  109. [ 1.041189] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  110. [ 1.041218] hw-breakpoint: maximum watchpoint size is 8 bytes.
  111. [ 1.044271] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
  112. [ 1.045084] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
  113. [ 1.045127] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver
  114. [ 1.048091] imx mu driver is registered.
  115. [ 1.049151] imx rpmsg driver is registered.
  116. [ 1.128607] SCSI subsystem initialized
  117. [ 1.129800] usbcore: registered new interface driver usbfs
  118. [ 1.129960] usbcore: registered new interface driver hub
  119. [ 1.130086] usbcore: registered new device driver usb
  120. [ 1.153469] i2c i2c-0: IMX I2C adapter registered
  121. [ 1.176147] i2c i2c-1: IMX I2C adapter registered
  122. [ 1.177483] pps_core: LinuxPPS API ver. 1 registered
  123. [ 1.177519] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  124. [ 1.177611] PTP clock support registered
  125. [ 1.181077] clocksource: Switched to clocksource mxc_timer1
  126. [ 1.181601] VFS: Disk quotas dquot_6.6.0
  127. [ 1.181793] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  128. [ 1.204330] NET: Registered protocol family 2
  129. [ 1.204724] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  130. [ 1.206725] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  131. [ 1.206853] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  132. [ 1.206969] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  133. [ 1.207133] TCP: Hash tables configured (established 4096 bind 4096)
  134. [ 1.207359] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  135. [ 1.207432] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  136. [ 1.207857] NET: Registered protocol family 1
  137. [ 1.209212] RPC: Registered named UNIX socket transport module.
  138. [ 1.209257] RPC: Registered udp transport module.
  139. [ 1.209276] RPC: Registered tcp transport module.
  140. [ 1.209297] RPC: Registered tcp NFSv4.1 backchannel transport module.
  141. [ 1.209837] Trying to unpack rootfs image as initramfs...
  142. [ 1.210806] rootfs image is not initramfs (no cpio magic); looks like an initrd
  143. [ 1.291387] Freeing initrd memory: 8784K
  144. [ 1.292223] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  145. [ 1.296399] Bus freq driver module loaded
  146. [ 1.298766] Initialise system trusted keyrings
  147. [ 1.299279] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  148. [ 1.313807] NFS: Registering the id_resolver key type
  149. [ 1.313898] Key type id_resolver registered
  150. [ 1.313923] Key type id_legacy registered
  151. [ 1.314162] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  152. [ 1.314192] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  153. [ 1.314289] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  154. [ 1.315555] fuse: init (API version 7.32)
  155. [ 1.552838] Key type asymmetric registered
  156. [ 1.552887] Asymmetric key parser 'x509' registered
  157. [ 1.552947] io scheduler mq-deadline registered
  158. [ 1.552970] io scheduler kyber registered
  159. [ 1.568214] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  160. [ 1.568264] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin
  161. [ 1.573075] mxs-dma 1804000.dma-apbh: initialized
  162. [ 1.580773] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 28, base_baud = 5000000) is a IMX
  163. [ 2.287301] printk: console [ttymxc0] enabled
  164. [ 2.294894] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 74, base_baud = 5000000) is a IMX
  165. [ 2.306960] imx sema4 driver is registered.
  166. [ 2.337366] brd: module loaded
  167. [ 2.361271] loop: module loaded
  168. [ 2.366539] imx ahci driver is registered.
  169. [ 2.388063] spi-nor spi4.0: n25q256a (32768 Kbytes)
  170. [ 2.404893] gpio@0 enforce active low on chipselect handle
  171. [ 2.427422] libphy: Fixed MDIO Bus: probed
  172. [ 2.433062] CAN device driver interface
  173. [ 2.442225] pps pps0: new PPS source ptp0
  174. [ 2.449050] libphy: fec_enet_mii_bus: probed
  175. [ 2.459065] fec 20b4000.ethernet eth0: registered PHC device 0
  176. [ 2.469141] pps pps1: new PPS source ptp1
  177. [ 2.476692] fec 2188000.ethernet eth1: registered PHC device 1
  178. [ 2.485217] usbcore: registered new interface driver r8152
  179. [ 2.490847] usbcore: registered new interface driver lan78xx
  180. [ 2.496628] random: fast init done
  181. [ 2.500261] usbcore: registered new interface driver asix
  182. [ 2.505973] usbcore: registered new interface driver ax88179_178a
  183. [ 2.512320] usbcore: registered new interface driver cdc_ether
  184. [ 2.518289] usbcore: registered new interface driver smsc95xx
  185. [ 2.524231] usbcore: registered new interface driver net1080
  186. [ 2.529993] usbcore: registered new interface driver cdc_subset
  187. [ 2.536076] usbcore: registered new interface driver zaurus
  188. [ 2.541807] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  189. [ 2.549381] usbcore: registered new interface driver cdc_ncm
  190. [ 2.555115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  191. [ 2.561704] ehci-mxc: Freescale On-Chip EHCI Host driver
  192. [ 2.567857] usbcore: registered new interface driver usb-storage
  193. [ 2.583889] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0
  194. [ 2.590095] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
  195. [ 2.599637] i2c /dev entries driver
  196. [ 2.607370] mag3110 0-000e: check mag3110 chip ID
  197. [ 2.612641] mag3110 0-000e: read chip ID 0xfffffffa is not equal to 0xc4!
  198. [ 2.620132] mag3110: probe of 0-000e failed with error -22
  199. [ 2.632182] sdhci: Secure Digital Host Controller Interface driver
  200. [ 2.638400] sdhci: Copyright(c) Pierre Ossman
  201. [ 2.642925] sdhci-pltfm: SDHCI platform and OF driver helper
  202. [ 2.652185] sdhci-esdhc-imx 2190000.mmc: voltage-ranges unspecified
  203. [ 2.658594] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
  204. [ 2.667839] sdhci-esdhc-imx 2194000.mmc: voltage-ranges unspecified
  205. [ 2.678686] usbcore: registered new interface driver usbhid
  206. [ 2.686912] usbhid: USB HID core driver
  207. [ 2.700760] NET: Registered protocol family 26
  208. [ 2.707264] NET: Registered protocol family 10
  209. [ 2.714889] Segment Routing with IPv6
  210. [ 2.718722] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
  211. [ 2.726435] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
  212. [ 2.734285] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  213. [ 2.745835] NET: Registered protocol family 17
  214. [ 2.750440] can: controller area network core
  215. [ 2.755365] NET: Registered protocol family 29
  216. [ 2.759947] can: raw protocol
  217. [ 2.763146] can: broadcast manager protocol
  218. [ 2.767571] can: netlink gateway - max_hops=1
  219. [ 2.772551] can: SAE J1939
  220. [ 2.775496] lib80211: common routines for IEEE802.11 drivers
  221. [ 2.781450] Key type dns_resolver registered
  222. [ 2.802262] mmc1: host does not support reading read-only switch, assuming write-enable
  223. [ 2.815134] mmc1: new high speed SDHC card at address 0001
  224. [ 2.821612] Registering SWP/SWPB emulation handler
  225. [ 2.826910] Loading compiled-in X.509 certificates
  226. [ 2.833708] mmcblk1: mmc1:0001 SD32G 29.1 GiB
  227. [ 2.843430] mmcblk1: p1 p2
  228. [ 2.879378] imx_usb 2184000.usb: No over current polarity defined
  229. [ 2.896591] ci_hdrc ci_hdrc.1: EHCI Host Controller
  230. [ 2.901601] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  231. [ 2.931383] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  232. [ 2.937307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  233. [ 2.945695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  234. [ 2.953000] usb usb1: Product: EHCI Host Controller
  235. [ 2.957903] usb usb1: Manufacturer: Linux 5.10.72-lts-5.10.y+ga98ad3d576bb ehci_hcd
  236. [ 2.965623] usb usb1: SerialNumber: ci_hdrc.1
  237. [ 2.971759] hub 1-0:1.0: USB hub found
  238. [ 2.975690] hub 1-0:1.0: 1 port detected
  239. [ 2.984045] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C
  240. [ 3.005392] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
  241. [ 3.013096] Please append a correct "root=" boot option; here are the available partitions:
  242. [ 3.021615] 0100 65536 ram0
  243. [ 3.021622] (driver?)
  244. [ 3.027744] 0101 65536 ram1
  245. [ 3.027749] (driver?)
  246. [ 3.033910] 0102 65536 ram2
  247. [ 3.033916] (driver?)
  248. [ 3.040029] 0103 65536 ram3
  249. [ 3.040035] (driver?)
  250. [ 3.046223] 0104 65536 ram4
  251. [ 3.046228] (driver?)
  252. [ 3.052369] 0105 65536 ram5
  253. [ 3.052374] (driver?)
  254. [ 3.058488] 0106 65536 ram6
  255. [ 3.058493] (driver?)
  256. [ 3.064632] 0107 65536 ram7
  257. [ 3.064637] (driver?)
  258. [ 3.070750] 0108 65536 ram8
  259. [ 3.070755] (driver?)
  260. [ 3.076920] 0109 65536 ram9
  261. [ 3.076925] (driver?)
  262. [ 3.083069] 010a 65536 ram10
  263. [ 3.083074] (driver?)
  264. [ 3.089276] 010b 65536 ram11
  265. [ 3.089280] (driver?)
  266. [ 3.095506] 010c 65536 ram12
  267. [ 3.095511] (driver?)
  268. [ 3.101757] 010d 65536 ram13
  269. [ 3.101763] (driver?)
  270. [ 3.107964] 010e 65536 ram14
  271. [ 3.107969] (driver?)
  272. [ 3.114194] 010f 65536 ram15
  273. [ 3.114199] (driver?)
  274. [ 3.120406] 1f00 32768 mtdblock0
  275. [ 3.120411] (driver?)
  276. [ 3.127008] b300 30558720 mmcblk1
  277. [ 3.127014] driver: mmcblk
  278. [ 3.133919] b301 22716 mmcblk1p1 20118f0d-01
  279. [ 3.133925]
  280. [ 3.140735] b302 258771 mmcblk1p2 20118f0d-02
  281. [ 3.140741]
  282. [ 3.147612] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  283. [ 3.155899] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
  284.  
  285.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!