API tools faq
paste
Advertisement
Guest User

HT2000W Router Bootlog

a guest
Apr 9th, 2022
128
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.19 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.4q-A0.a-g13cb6574 (Aug 9 2016 - 13:33:38)
  2.  
  3. ap152 - Dragonfly 1.0DRAM:
  4. sri
  5. ath_ddr_initial_config(278): (ddr2 init)
  6. ath_sys_frequency: cpu 775 ddr 650 ahb 258
  7. Tap values = (0xe, 0xe, 0xe, 0xe)
  8. 128 MB
  9. Top of RAM usable for U-Boot at: 88000000
  10. Reserving 209k for U-Boot at: 87fc8000
  11. Reserving 192k for malloc() at: 87f98000
  12. Reserving 44 Bytes for Board Info at: 87f97fd4
  13. Reserving 36 Bytes for Global Data at: 87f97fb0
  14. Reserving 128k for boot params() at: 87f77fb0
  15. Stack Pointer at: 87f77f98
  16. Now running in RAM - U-Boot at: 87fc8000
  17. Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
  18. flash size 16MB, sector count = 256
  19. Flash: 16 MB
  20. In: serial
  21. Out: serial
  22. Err: serial
  23. Net: ath_gmac_enet_initialize...
  24. No valid address in Flash. Using fixed address
  25. ath_gmac_enet_initialize: reset mask:c02200
  26. athr_mgmt_init ::done
  27. Dragonfly ----> S17 PHY *
  28. athrs17_reg_init: complete
  29. SGMII in forced mode
  30. athr_gmac_sgmii_setup SGMII done
  31. : cfg1 0x80000000 cfg2 0x7114
  32. eth0: 00:03:7f:09:0b:ad
  33. eth0 up
  34. eth0
  35. Setting 0x181162c0 to 0x40802100
  36. check GPIO registers
  37. reg[0x18040000]=[0x00bff5e6]
  38. reg[0x18040004]=[0x800c0e95]
  39. reg[0x18040008]=[0x00affff6]
  40. B-B header connects to HT2000 board
  41. boot param check
  42. Start: 9F03F000
  43. flash version string = [1.1.4.7]
  44. flash md5 string = [7c6bc6d4ad4d0880d173986df784c611]
  45. flash test
  46. Start: 9F050000 End: 9F3FF000 Offset: 00000000
  47. flash md5 string = [62042db86f81be859755ced2818cd42e]
  48. calc md5 string = [62042db86f81be859755ced2818cd42e]
  49. Start: 9F400000 End: 9FFAF000 Offset: 00000000
  50. flash md5 string = [6bea0c5f0251aab375ea4cfa80dff43d]
  51. calc md5 string = [6bea0c5f0251aab375ea4cfa80dff43d]
  52. select boot partition
  53. 1. bootid : 1, bootnum : 0, bootall: 16
  54. run into normal linux!
  55. Protect off 9F040000 ... 9F04FFFF
  56. Un-Protecting sectors 4..4 in bank 1
  57. Un-Protected 1 sectors
  58. Erasing Flash...Erasing flash...
  59. First 0x4 last 0x4 sector size 0x10000
  60.  4
  61. Erased 1 sectors
  62. Writing to Flash... write addr: 9f040000
  63. done
  64. Protecting sectors 4..4 in bank 1
  65. Protected 1 sectors
  66. 2. bootid : 1, bootnum : 1, bootall: 17
  67. Hit any key to stop autoboot: 2  1  0
  68. ## Booting image at 9f400000 ...
  69. Image Name: MIPS OpenWrt Linux-3.3.8
  70. Created: 2018-08-24 4:22:35 UTC
  71. Image Type: MIPS Linux Multi-File Image (lzma compressed)
  72. Data Size: 1097384 Bytes = 1 MB
  73. Load Address: 80060000
  74. Entry Point: 80060000
  75. Contents:
  76. Image 0: 1097376 Bytes = 1 MB
  77. Verifying Checksum at 0x9f400040 ...OK
  78. Uncompressing Multi-File Image ... OK
  79. No initrd
  80. ## Transferring control to Linux (at address 80060000) ...
  81. ## Giving linux memsize in bytes, 134217728
  82.  
  83. Starting kernel ...
  84.  
  85. [ 0.000000] Linux version 3.3.8 (ying_xiang@debian-wheezy-i386) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Fri Aug 24 04:22:22 UTC 2018
  86. [ 0.000000] bootconsole [early0] enabled
  87. [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc)
  88. [ 0.000000] SoC: Qualcomm Atheros QCA956X rev 0
  89. [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
  90. [ 0.000000] Determined physical RAM map:
  91. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  92. [ 0.000000] User-defined physical RAM map:
  93. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  94. [ 0.000000] Initrd not found or empty - disabling initrd
  95. [ 0.000000] Zone PFN ranges:
  96. [ 0.000000] Normal 0x00000000 -> 0x00008000
  97. [ 0.000000] Movable zone start PFN for each node
  98. [ 0.000000] Early memory PFN ranges
  99. [ 0.000000] 0: 0x00000000 -> 0x00008000
  100. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  101. [ 0.000000] Kernel command line: board=AP152 console=ttyS0,115200 root=31:04 panic=10 mtdparts=ath-nor0:256k(ub),64k(ub-env),3776k(tiny),1088k(knl-1),10880k(root-1),64k(board_data),64k(seccfg),64k(pricfg),64k(dev),64k(ART) mem=128M init=/sbin/preinit rootfstype=squashfs noinitrd
  102. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  103. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  104. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  105. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  106. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  107. [ 0.000000] Writing ErrCtl register=00000000
  108. [ 0.000000] Readback ErrCtl register=00000000
  109. [ 0.000000] Memory: 126088k/131072k available (2352k kernel code, 4984k reserved, 639k data, 224k init, 0k highmem)
  110. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  111. [ 0.000000] NR_IRQS:83
  112. [ 0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  113. [ 0.060000] pid_max: default: 32768 minimum: 301
  114. [ 0.060000] Mount-cache hash table entries: 512
  115. [ 0.070000] NET: Registered protocol family 16
  116. [ 0.070000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
  117. [ 0.080000] MIPS: machine is Qualcomm Atheros AP152 reference board
  118. [ 0.080000]
  119. [ 0.080000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!!
  120. [ 0.090000] registering PCI controller with io_map_base unset
  121. [ 0.300000] bio: create slab <bio-0> at 0
  122. [ 0.300000] PCI host bridge to bus 0000:00
  123. [ 0.310000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
  124. [ 0.310000] pci_bus 0000:00: root bus resource [io 0x0001]
  125. [ 0.320000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  126. [ 0.320000] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  127. [ 0.330000] pci 0000:00:00.0: using irq 40 for pin 1
  128. [ 0.330000] Switching to clocksource MIPS
  129. [ 0.340000] NET: Registered protocol family 2
  130. [ 0.340000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  131. [ 0.340000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  132. [ 0.350000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  133. [ 0.350000] TCP: Hash tables configured (established 4096 bind 4096)
  134. [ 0.360000] TCP reno registered
  135. [ 0.360000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  136. [ 0.370000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  137. [ 0.380000] NET: Registered protocol family 1
  138. [ 0.390000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  139. [ 0.400000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  140. [ 0.410000] msgmni has been set to 246
  141. [ 0.410000] io scheduler noop registered
  142. [ 0.420000] io scheduler deadline registered (default)
  143. [ 0.420000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  144. [ 0.450000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  145. [ 0.460000] console [ttyS0] enabled, bootconsole disabled
  146. [ 0.460000] console [ttyS0] enabled, bootconsole disabled
  147. [ 0.470000] 10 cmdlinepart partitions found on MTD device ath-nor0
  148. [ 0.480000] Creating 10 MTD partitions on "ath-nor0":
  149. [ 0.480000] 0x000000000000-0x000000040000 : "ub"
  150. [ 0.490000] 0x000000040000-0x000000050000 : "ub-env"
  151. [ 0.490000] 0x000000050000-0x000000400000 : "tiny"
  152. [ 0.500000] 0x000000400000-0x000000510000 : "knl-1"
  153. [ 0.510000] 0x000000510000-0x000000fb0000 : "root-1"
  154. [ 0.510000] 0x000000fb0000-0x000000fc0000 : "board_data"
  155. [ 0.520000] 0x000000fc0000-0x000000fd0000 : "seccfg"
  156. [ 0.530000] 0x000000fd0000-0x000000fe0000 : "pricfg"
  157. [ 0.530000] 0x000000fe0000-0x000000ff0000 : "dev"
  158. [ 0.540000] 0x000000ff0000-0x000001000000 : "ART"
  159. [ 0.610000] [Read board_data partition]: name=sn,value=A709A3004221
  160. [ 0.670000] [Read board_data partition]: name=mac,value=00:80:AE:AE:8A:B5
  161. [ 0.740000] [Read board_data partition]: name=sec_mac,value=00:80:AE:AE:8A:B6
  162. [ 0.890000] ag71xx_mdio: probed
  163. [ 0.890000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  164. [ 1.470000] eth0: Atheros AR8327 switch driver attached.
  165. [ 4.390000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
  166. [ 4.400000] AR71XX_RESET_REG_WDOG_CTRL: 0x0
  167. [ 4.400000]
  168. [ 4.400000] Netfilter messages via NETLINK v0.30.
  169. [ 4.410000] TCP cubic registered
  170. [ 4.410000] NET: Registered protocol family 17
  171. [ 4.420000] 8021q: 802.1Q VLAN Support v1.8
  172. [ 4.420000] ### of_selftest(): No testcase data in device tree; not running tests
  173. [ 4.440000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  174. [ 4.440000] Freeing unused kernel memory: 224k freed
  175. arca.dbus.mng: is ready
  176. agent_handler(236):arca.dbus.misc: is ready
  177. MD5=[78ca5513ac40b5826ec57d885807d6a3]
  178.  
  179. Please press Enter to activate this console.
  180. hotplug-call start ============
  181. hotplug-call param1 = platform
  182. hotplug-call ACTION = add
  183. hotplug-call BUTTON =
  184. hotplug-call SEEN =
  185. hotplug-call stop +++++++++++++
  186.  
  187.  
  188. hotplug-call start ============
  189. hotplug-call param1 = platform
  190. hotplug-call ACTION = add
  191. hotplug-call BUTTON =
  192. hotplug-call SEEN =
  193. hotplug-call stop +++++++++++++
  194.  
  195.  
  196. hotplug-call start ============
  197. hotplug-call param1 = platform
  198. hotplug-call ACTION = add
  199. hotplug-call BUTTON =
  200. hotplug-call SEEN =
  201. hotplug-call stop +++++++++++++
  202.  
  203.  
  204. hotplug-call start ============
  205. hotplug-call param1 = platform
  206. hotplug-call ACTION = add
  207. hotplug-call BUTTON =
  208. hotplug-call SEEN =
  209. hotplug-call stop +++++++++++++
  210.  
  211.  
  212. hotplug-call start ============
  213. hotplug-call param1 = platform
  214. hotplug-call ACTION = add
  215. hotplug-call BUTTON =
  216. hotplug-call SEEN =
  217. hotplug-call stop +++++++++++++
  218.  
  219.  
  220. hotplug-call start ============
  221. hotplug-call param1 = platform
  222. hotplug-call ACTION = add
  223. hotplug-call BUTTON =
  224. hotplug-call SEEN =
  225. hotplug-call stop +++++++++++++
  226.  
  227.  
  228. hotplug-call start ============
  229. hotplug-call param1 = platform
  230. hotplug-call ACTION = add
  231. hotplug-call BUTTON =
  232. hotplug-call SEEN =
  233. hotplug-call stop +++++++++++++
  234.  
  235.  
  236. hotplug-call start ============
  237. hotplug-call param1 = platform
  238. hotplug-call ACTION = add
  239. hotplug-call BUTTON =
  240. hotplug-call SEEN =
  241. hotplug-call stop +++++++++++++
  242.  
  243.  
  244. hotplug-call start ============
  245. hotplug-call param1 = platform
  246. hotplug-call ACTION = add
  247. hotplug-call BUTTON =
  248. hotplug-call SEEN =
  249. hotplug-call stop +++++++++++++
  250.  
  251.  
  252. hotplug-call start ============
  253. hotplug-call param1 = platform
  254. hotplug-call ACTION = add
  255. hotplug-call BUTTON =
  256. hotplug-call SEEN =
  257. hotplug-call stop +++++++++++++
  258.  
  259.  
  260. hotplug-call start ============
  261. hotplug-call param1 = tty
  262. hotplug-call ACTION = add
  263. hotplug-call BUTTON =
  264. hotplug-call SEEN =
  265. hotplug-call stop +++++++++++++
  266.  
  267. [ 11.240000] mem_manager: module license 'unspecified' taints kernel.
  268. [ 11.250000] Disabling lock debugging due to kernel taint
  269. [ 11.260000] __mm_init_module
  270.  
  271. hotplug-call start ============
  272. hotplug-call param1 = tty
  273. hotplug-call ACTION = add
  274. hotplug-call BUTTON =
  275. hotplug-call SEEN =
  276. hotplug-call stop +++++++++++++
  277.  
  278. [ 11.410000] ath_dfs: Version 2.0.0
  279. [ 11.410000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  280.  
  281. hotplug-call start ============
  282. hotplug-call param1 = tty
  283. hotplug-call ACTION = add
  284. hotplug-call BUTTON =
  285. hotplug-call SEEN[ 11.560000] ath_spectral: Version 2.0.0
  286. [ 11.560000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  287. =
  288. hotplug-call stop +++++++++++++
  289.  
  290.  
  291. hotplug-call start ============
  292. hotplug-call param1 = block
  293. hotplug-call ACTION = add
  294. hotplug-call BUTTON =
  295. hotplug-call SEEN =
  296. hotplug-call stop +++++++++++++
  297.  
  298.  
  299. hotplug-call start ============
  300. hotplug-call param1 = block
  301. hotplug-call ACTION = add
  302. hotplug-call BUTTON =
  303. hotplug-call SEEN =
  304. hotplug-call stop +++++++++++++
  305.  
  306.  
  307. hotplug-call start ============
  308. hotplug-call param1 = block
  309. hotplug-call ACTION = add
  310. hotplug-call BUTTON =
  311. hotplug-call SEEN =
  312. hotplug-call stop +++++++++++++
  313.  
  314.  
  315. hotplug-call start ============
  316. hotplug-call param1 = block
  317. hotplug-call ACTION = add
  318. hotplug-call BUTTON =
  319. hotplug-call SEEN =
  320. hotplug-call stop +++++++++++++
  321.  
  322.  
  323. hotplug-call start ============
  324. hotplug-call param1 = block
  325. hotplug-call ACTION = add
  326. hotplug-call BUTTON =
  327. hotplug-call SEEN =
  328. hotplug-call stop +++++++++++++
  329.  
  330.  
  331. hotplug-call start ============
  332. hotplug-call param1 = block
  333. hotplug-call ACTION = add
  334. hotplug-call BUTTON =
  335. hotplug-call SEEN =
  336. hotplug-call stop +++++++++++++
  337.  
  338.  
  339. hotplug-call start ============
  340. hotplug-call param1 = block
  341. hotplug-call ACTION = add
  342. hotplug-call BUTTON =
  343. hotplug-call SEEN =
  344. hotplug-call stop +++++++++++++
  345.  
  346.  
  347. hotplug-call start ============
  348. hotplug-call param1 = block
  349. hotplug-call ACTION = add
  350. hotplug-call BUTTON =
  351. hotplug-call SEEN =
  352. hotplug-call stop +++++++++++++
  353.  
  354.  
  355. hotplug-call start ============
  356. hotplug-call param1 = block
  357. hotplug-call ACTION = add
  358. hotplug-call BUTTON =
  359. hotplug-call SEEN =
  360. hotplug-call stop +++++++++++++
  361.  
  362.  
  363. hotplug-call start ============
  364. hotplug-call param1 = block
  365. hotplug-call ACTION = add
  366. hotplug-call BUTTON =
  367. hotplug-call SEEN =
  368. hotplug-call stop +++++++++++++
  369.  
  370.  
  371. hotplug-call start ============
  372. hotplug-call param1 = net
  373. hotplug-call ACTION = add
  374. hotplug-call BUTTON =
  375. hotplug-call SEEN =
  376. hotplug-call stop +++++++++++++
  377.  
  378.  
  379. hotplug-call start ============
  380. hotplug-call param1 = net
  381. hotplug-call ACTION = add
  382. hotplug-call BUTTON =
  383. hotplug-call SEEN =
  384. hotplug-call stop +++++++++++++
  385.  
  386. [ 13.180000] ath_ol_pci: (Atheros/multi-bss)
  387. [ 13.180000] ol_ath_pci_probe: PCI device id 003c :003c
  388. [ 13.190000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  389. [ 13.200000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  390. [ 13.200000] *********** Peregrine **************
  391. [ 13.210000]
  392. [ 13.210000] __ol_ath_attach() Allocated scn 872c0380
  393. [ 13.220000] ath_ol_pci 0000:00:00.0: ath DEBUG: sc=0x8799d800
  394. [ 13.220000]
  395. [ 13.220000] ol_ath_pci_configure : num_desired MSI set to 0
  396. [ 13.230000]
  397. [ 13.230000] Using PCI Legacy Interrupt
  398. [ 14.230000]
  399. [ 14.230000] CLOCK PLL skipped
  400. [ 14.240000] __ol_ath_attach: dev name wifi1
  401. [ 14.250000] ol_ath_attach interface_id 1
  402. [ 14.250000] ol_target_init() BMI inited.
  403. [ 14.250000] ol_target_init() BMI Get Target Info.
  404. [ 14.260000] Chip id: 0x7, chip version: 0x4100016c
  405. [ 14.260000]
  406. [ 14.260000] CE WAR Disabled
  407. [ 14.270000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  408. [ 14.280000] ol_target_init() configure Target .
  409. [ 14.280000] ol_transfer_bin_file: flash data file defined
  410. [ 14.290000] ol_transfer_bin_file[3661] Get Caldata for wifi1.
  411. [ 14.290000] __adf_os_fs_read[42], Open File /tmp/wifi1.caldata SUCCESS!!
  412. [ 14.300000] file system magic:16914836
  413. [ 14.300000] super blocksize:4096
  414. [ 14.310000] inode 658
  415. [ 14.310000] file size:12064
  416. [ 14.310000] __adf_os_fs_read[55]: caldata data size mismatch, fsize=12064, cal_size=2116
  417. [ 14.320000] qc98xx_verify_checksum: flash checksum passed: 0xfb4c
  418. [ 14.330000] ol_transfer_bin_file 3722: Download Flash data len 2116
  419. [ 14.330000] Board extended Data download address: 0x0
  420. [ 14.340000]
  421. [ 14.340000] Mission mode: Firmware CHIP Version 0
  422. [ 14.350000] ol_transfer_bin_file: Downloading firmware file: AR9888/hw.2/athwlan.bin
  423.  
  424. hotplug-call start ============
  425. hotplug-call param1 = firmware
  426. hotplug-call ACTION = add
  427. hotplug-call BUTTON =
  428. hotplug-call SEEN =
  429. hotplug-call stop +++++++++++++
  430.  
  431. [ 14.690000] ol_transfer_bin_file 3542: downloading file 1, Download data len 239424
  432. [ 15.710000] ol_target_init() Download FW done.
  433. [ 15.720000] ol_ath_attach() WMI attached. wmi_handle 867f0000
  434. [ 15.720000] htc_wmi_init() HT Create . 87995000
  435. [ 15.730000] htc_wmi_init() HIF Claim.
  436. [ 15.730000] htc_wmi_init 7623 host_enable 1 nss_nwifi_offload 0
  437. [ 15.740000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  438. [ 15.750000] OL_ACBKMinfree : 0
  439. [ 15.750000] OL_ACBEMinfree : 0
  440. [ 15.750000] OL_ACVIMinfree : 0
  441. [ 15.760000] OL_ACVOMinfree : 0
  442. [ 15.760000] CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5
  443. [ 15.770000] CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x5e0d020 nbytes 0 recv_ctxt 0x85e10240
  444. [ 15.780000] Startup Mode-0 set
  445. [ 15.780000]
  446. [ 15.780000] <=== cfg max peer id 1056 ====>
  447. [ 15.790000] HTC Service:0x0300 ep:1 TX flow control disabled
  448. [ 15.800000] htt_peer_map_timer_init Enter pdev 85e18000 hrtimer 85e1c880
  449. [ 15.800000]
  450. [ 15.800000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 8788e000 paddr 788e000
  451. [ 15.810000]
  452. [ 15.810000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  453. [ 15.820000] CE_pkt_dl_len_set CE 4 Pkt download length 64
  454. [ 15.830000] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 85a90000
  455. [ 15.840000] HTC Service:0x0100 ep:2 TX flow control disabled
  456. [ 15.850000] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
  457. [ 15.860000] Firmware_Build_Number:0
  458. [ 15.860000] host/RAM_fw Build Ver Mismatch: H:0x5C, F:0x0 !
  459. [ 15.870000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x338001b2 vht_supp_mcs:0x0000fffa
  460. [ 15.880000]
  461. [ 15.880000] RES CFG Support wmi_service_bitmap 977e
  462. [ 15.880000]
  463. [ 15.880000] Sending Ext resource cfg: HOST PLATFORM as 1 and fw_feature_bitmap as 50 to TGT
  464. [ 15.890000] ol_ath_service_ready_event: tt_support: 0
  465. [ 15.900000] ol_ath_service_ready_event: periodic_chan_stats: 1
  466. [ 15.910000] ol_ath_service_ready_event: sw_cal_support_check_flag: 0
  467. [ 15.910000] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
  468. [ 15.920000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 440 actual units 145
  469. [ 15.930000] ol_ath_alloc_host_mem_chunk req_id 1 idx 0 num_units 145 unit_len 440,
  470. [ 15.930000] chunk 0 len 63800 requested ,ptr 0x5ae0000
  471. [ 15.950000] FIRMWARE:P 145 V 16 T 443
  472. [ 15.950000]
  473. [ 15.960000] wmi_ready_event_rx: WMI UNIFIED READY event
  474. [ 15.960000] ol_ath_ready_event:00:80:ae:ae:8a:b6
  475. [ 15.970000] ol_ath_connect_htc() WMI is ready
  476. [ 15.970000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
  477. [ 15.990000] ol_ath_attach() connect HTC.
  478. [ 15.990000] target uses HTT version 2.2; host uses 2.2
  479. [ 16.000000] bypasswmi : 0
  480. [ 16.000000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  481. [ 16.010000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  482. [ 16.020000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  483. [ 16.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  484. [ 16.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  485. [ 16.040000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  486. [ 16.050000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  487. [ 16.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  488. [ 16.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  489. [ 16.070000] Add VHT80 channel: 5210
  490. [ 16.080000] Add VHT80 channel: 5290
  491. [ 16.080000] Add VHT80 channel: 5530
  492. [ 16.080000] Add VHT80 channel: 5610
  493. [ 16.090000] Add VHT80 channel: 5690
  494. [ 16.090000] Add VHT80 channel: 5775
  495. [ 16.090000] Skipping VHT80 channel 5825
  496. [ 16.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
  497. [ 16.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
  498. [ 16.110000] OL Resmgr Init-ed
  499. [ 16.120000] ieee80211_bsteering_attach: Band steering initialized
  500. [ 16.120000] acfg_attach: 2891: Netlink socket created:87257600
  501. [ 16.130000] SPECTRAL : get_capability not registered
  502. [ 16.140000] HAL_CAP_PHYDIAG : Capable
  503. [ 16.140000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  504. [ 16.150000] SPECTRAL : get_capability not registered
  505. [ 16.150000] HAL_CAP_RADAR : Capable
  506. [ 16.160000] SPECTRAL : Need to fix the capablity check for SPECTRAL
  507. [ 16.160000] (spectral_attach : 242)
  508. [ 16.170000] SPECTRAL : get_capability not registered
  509. [ 16.170000] HAL_CAP_SPECTRAL_SCAN : Capable
  510. [ 16.180000] SPECTRAL : get_tsf64 not registered
  511. [ 16.180000] spectral_init_netlink 78 NULL SKB
  512. [ 16.190000] Green-AP : Green-AP : Attached
  513. [ 16.190000]
  514. [ 16.190000] Green-AP : Attached
  515. [ 16.190000] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
  516. [ 16.200000] ol_if_dfs_attach: called; ptr=85af1974, radar_info=87261b58
  517. [ 16.210000] dfs_attach: event log enabled by default
  518. [ 16.220000] ol_ath_attach() UMAC attach .
  519. [ 16.220000]
  520. [ 16.220000] BURSTING enabled by default
  521. [ 16.230000] ol_ath_attach: Set global_ic[1] ..ptr:867cb4ac
  522. [ 16.230000] ath_lowi_if_netlink_init LOWI Netlink successfully created
  523. [ 16.240000] osif_wrap_attach:441 osif wrap attached
  524. [ 16.240000] osif_wrap_devt_init:402 osif wrap dev table init done
  525. [ 16.250000] Wrap Attached: Wrap_com =87256a00 ic->ic_wrap_com=87256a00 &wrap_com->wc_devt=87256a00
  526. [ 16.260000] __ol_ath_attach: hard_header_len reservation 74
  527. [ 16.270000] ol_ath_thermal_mitigation_attach: TT not supported in FW
  528.  
  529. hotplug-call start ============
  530. hotplug-call param1 = net
  531. hotplug-call ACTION = add
  532. hotplug-call BUTTON =
  533. hotplug-call SEEN =
  534. hotplug-call stop +++++++++++++
  535.  
  536. [ 16.650000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D)
  537. [ 16.670000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  538. [ 16.720000] ath_tx99: Version 2.0
  539. [ 16.720000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
  540. [ 16.890000] [wifi1] FWLOG: [31707] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
  541. [ 16.900000] [wifi1] FWLOG: [31707] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
  542. [ 16.910000] [wifi1] FWLOG: [31707] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
  543. [ 16.910000] [wifi1] FWLOG: [31707] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
  544. [ 16.920000] [wifi1] FWLOG: [31709] WHAL_ERROR_RESET_PM ( )
  545. [ 16.930000] [wifi1] FWLOG: [31716] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
  546. [ 17.000000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  547. [ 17.170000] __ath_attach: Set global_scn[0]
  548. [ 17.170000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead ***
  549. [ 17.180000] ACBKMinfree = 48
  550. [ 17.180000] ACBEMinfree = 32
  551. [ 17.190000] ACVIMinfree = 16
  552. [ 17.190000] ACVOMinfree = 0
  553. [ 17.190000] CABMinfree = 48
  554. [ 17.200000] UAPSDMinfree = 0
  555. [ 17.200000] ATH_TXBUF=2700
  556. [ 17.210000] Enterprise mode: 0x03bda000
  557. [ 17.210000] Restoring Cal data from FS
  558. [ 17.220000] __adf_os_fs_read[42], Open File /tmp/wifi0.caldata SUCCESS!!
  559. [ 17.230000] file system magic:16914836
  560. [ 17.230000] super blocksize:4096
  561. [ 17.230000] inode 657
  562. [ 17.240000] file size:12064
  563. [ 17.240000] __adf_os_fs_read[55]: caldata data size mismatch, fsize=12064, cal_size=1088
  564. [ 17.250000]
  565. [ 17.250000] ART Version : -48.0.0
  566. [ 17.250000] SW Image Version : -48.0.0.0.0
  567. [ 17.260000] Board Revision :
  568. [ 17.260000] ahpriv->ah_devid=[0x3f]!
  569. [ 17.260000] mac address:0:80:ae:ae:8a:b5!
  570. [ 17.270000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125
  571. [ 17.280000] SPECTRAL : get_capability not registered
  572. [ 17.280000] HAL_CAP_PHYDIAG : Capable
  573. [ 17.280000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  574. [ 17.290000] SPECTRAL : get_capability not registered
  575. [ 17.300000] HAL_CAP_RADAR : Capable
  576. [ 17.300000] SPECTRAL : Need to fix the capablity check for SPECTRAL
  577. [ 17.300000] (spectral_attach : 242)
  578. [ 17.310000] SPECTRAL : get_capability not registered
  579. [ 17.320000] HAL_CAP_SPECTRAL_SCAN : Capable
  580. [ 17.320000] SPECTRAL : get_tsf64 not registered
  581. [ 17.330000] spectral_init_netlink 78 NULL SKB
  582. [ 17.330000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT
  583. [ 17.340000] SPECTRAL :----- module attached
  584. [ 17.340000] Green-AP : Green-AP : Attached
  585. [ 17.340000]
  586. [ 17.350000] ath_get_caps[6145] rx chainmask mismatch actual 7 sc_chainmak 0
  587. [ 17.360000] ath_get_caps[6120] tx chainmask mismatch actual 7 sc_chainmak 0
  588. [ 17.370000] band steering initialized for direct attach hardware
  589. [ 17.380000] ieee80211_bsteering_attach: Band steering initialized
  590. [ 17.390000] acfg_attach: Offload using existing sock 87257600
  591. [ 17.390000] ath_attach_dfs[12542] dfsdomain 1
  592. [ 17.400000] dfs_attach: event log enabled by default
  593. [ 17.410000] SPECTRAL : module already attached
  594. [ 17.420000] ath_attach: Set global_ic[2]..gloabl_ic ptr:867cb4ac
  595. [ 17.420000] osif_wrap_attach:441 osif wrap attached
  596. [ 17.430000] osif_wrap_devt_init:402 osif wrap dev table init done
  597. [ 17.430000] Wrap Attached: Wrap_com =8724d000 ic->ic_wrap_com=8724d000 &wrap_com->wc_devt=8724d000
  598. [ 17.450000] ath_tx_paprd_init sc 855e8000 PAPRD disabled in HAL
  599. [ 17.460000] wifi0: Atheros 956X: mem=0xb8100000, irq=47
  600. [ 17.460000] ath_da_pci: (Atheros/multi-bss)
  601. [ 17.520000] pktlog_init: Initializing Pktlog for AR9888, pktlog_hdr_size = 12
  602. [ 17.650000] __sa_init_module
  603.  
  604. hotplug-call start ============
  605. hotplug-call param1 = net
  606. hotplug-call ACTION = add
  607. hotplug-call BUTTON =
  608. hotplug-call SEEN =
  609. hotplug-call stop +++++++++++++
  610.  
  611. [ 18.160000] ssdk_plat_init start
  612. [ 18.200000] Register QCA PHY driver
  613. [ 18.200000] PHY ID is 0x4dd036
  614. [ 18.300000] qca probe f1 phy driver succeeded!
  615. [ 18.310000] qca-ssdk module init succeeded!
  616. [ 18.470000] nf_conntrack version 0.5.0 (1973 buckets, 7892 max)
  617. [ 18.690000] ctnetlink v0.93: registering with nfnetlink.
  618. [ 18.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
  619. [ 19.040000] NET: Registered protocol family 10
  620. [ 19.050000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  621. [ 19.210000] fast-classifier: starting up
  622. [ 19.210000] fast-classifier: registered
  623. [ 19.330000] Button Hotplug driver version 0.4.1
  624. [ 20.460000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  625.  
  626. hotplug-call start ============
  627. hotplug-call param1 = platform
  628. hotplug-call ACTION = add
  629. hotplug-call BUTTON =
  630. hotplug-call SEEN =
  631. hotplug-call stop +++++++++++++
  632.  
  633. [ 20.490000] ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  634. [ 20.510000] ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  635.  
  636. hotplug-call start ============
  637. hotplug-call param1 = platform
  638. hotplug-call ACTION = add
  639. hotplug-call BUTTON =
  640. hotplug-call SEEN =
  641. hotplug-call stop +++++++++++++
  642.  
  643.  
  644. hotplug-call start ============
  645. hotplug-call param1 = platform
  646. hotplug-call ACTION = add
  647. hotplug-call BUTTON =
  648. hotplug-call SEEN =
  649. hotplug-call stop +++++++++++++
  650.  
  651.  
  652. hotplug-call start ============
  653. hotplug-call param1 = platform
  654. hotplug-call ACTION = add
  655. hotplug-call BUTTON =
  656. hotplug-call SEEN =
  657. hotplug-call stop +++++++++++++
  658.  
  659.  
  660. hotplug-call start ============
  661. hotplug-call param1 = platform
  662. hotplug-call ACTION = add
  663. hotplug-call BUTTON =
  664. hotplug-call SEEN =
  665. hotplug-call stop +++++++++++++
  666.  
  667.  
  668. hotplug-call start ============
  669. hotplug-call param1 = platform
  670. hotplug-call ACTION = add
  671. hotplug-call BUTTON =
  672. hotplug-call SEEN =
  673. hotplu[ 21.100000] device eth0.1 entered promiscuous mode
  674. g-call stop ++++[ 21.110000] device eth0 entered promiscuous mode
  675. +++++++++
  676.  
  677.  
  678. hotplug-call start ============
  679. hotplug-call param1 = platform
  680. hotplug-call ACTION = add
  681. hotplug-call BUTTON =
  682. hotplug-call SEEN =
  683. hotplug-call stop ++++[ 21.200000] ADDRCONF(NETDEV_UP): br0: link is not ready
  684. +++++++++
  685.  
  686.  
  687. hotplug-call start ============
  688. hotplug-call param1 = platform
  689. hotplug-call ACTION = add
  690. hotplug-call BUTTON =
  691. hotplug-call SEEN =
  692. hotplug-call stop +++++++++++++
  693.  
  694. [ 21.390000] ath_attach_dfs[12542] dfsdomain 1
  695. [ 21.400000] dfs_attach: event log enabled by default
  696.  
  697. hotplug-call start ============
  698. hotplug-call param1 = platform
  699. hotplug-call ACTION = add
  700. hotplug-call BUTTON =
  701. hotplug-call SEEN =
  702. hotplug-call stop +++++++++++++
  703.  
  704. [ 21.530000] wlan_vap_create : enter. devhandle=0x855f0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  705. [ 21.540000] ieee80211_mbo_vattach:MBO Initialized
  706. [ 21.540000] wlan_vap_create : exit. devhandle=0x855f0380, vap=0x85458000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  707. [ 21.550000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  708. [ 21.560000] VAP device wl0 created osifp: (84cfab80) os_if: (85458000)
  709.  
  710. hotplug-call start ============
  711. hotplug-call param1 = platform
  712. hotplug-call ACTION = add
  713. hotplug-call BUTTON =
  714. hotplug-call SEEN =
  715. hotplug-call stop +++++++++++++
  716.  
  717. [ 21.630000] siwfreq
  718. [ 21.630000] Set freq vap 0 stop send + 85458000
  719. [ 21.630000] Set freq vap 0 stop send -85458000
  720.  
  721. hotplug-call start ============
  722. hotplug-call param1 = tty
  723. hotplug-call ACTION = add
  724. hotplug-call BUTTON =
  725. hotplug-call SEEN =
  726. hotplug-call stop +++++++++++++
  727.  
  728. [ 21.670000] Set wait done --85458000
  729. [ 21.690000] device wl0 entered promiscuous mode
  730. [ 21.700000]
  731. [ 21.700000] DES SSID SET=
  732. [ 21.710000] vap-0(wl0):set SIOC80211NWID, 11 characters
  733. [ 21.720000]
  734. [ 21.720000] DES SSID SET=hug2g933927
  735.  
  736. hotplug-call start ============
  737. hotplug-call param1 = tty
  738. hotplug-call ACTION = add
  739. hotplug-call BUTTON =
  740. hotplug-call SEEN =
  741. hotplug-call stop +++++++++++++
  742.  
  743. [ 21.750000] ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
  744. [ 21.750000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  745. [ 21.760000] br0: port 1(eth0.1) entered forwarding state
  746. [ 21.770000] br0: port 1(eth0.1) entered forwarding state
  747. [ 21.770000] ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  748. [ 21.780000] eth0: link up (1000Mbps/Full duplex)
  749. [ 21.780000] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  750. [ 21.810000] wlan_vap_create : enter. devhandle=0x855f0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  751. [ 21.820000] ieee80211_mbo_vattach:MBO Initialized
  752. [ 21.830000] wlan_vap_create : exit. devhandle=0x855f0380, vap=0x85478000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  753. [ 21.840000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  754. [ 21.840000] VAP device wl2 created osifp: (85469b80) os_if: (85478000)
  755. [ 21.860000] wlan_vap_create : enter. devhandle=0x855f0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  756. [ 21.870000] ieee80211_mbo_vattach:MBO Initialized
  757. [ 21.870000] wlan_vap_create : exit. devhandle=0x855f0380, vap=0x84d48000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  758. [ 21.880000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  759. [ 21.890000] VAP device wl4 created osifp: (8546bb80) os_if: (84d48000)
  760. [ 21.950000] siwfreq
  761. [ 21.950000] Set freq vap 2 stop send + 85458000
  762. [ 21.950000] Set freq vap 2 stop send -85458000
  763.  
  764. hotplug-call start ============
  765. hotplug-call param1 = tty
  766. hotplug-call ACTION = add
  767. hotplug-call BUTTON =
  768. hotplug-call SEEN =
  769. hotplug-call stop +++++++++++++
  770.  
  771. [ 21.990000] Set wait done --85458000
  772. [ 21.990000] Set freq vap 2 stop send + 85478000
  773. [ 21.990000] Set freq vap 2 stop send -85478000
  774. [ 22.030000] Set wait done --85478000
  775. [ 22.030000] Set freq vap 2 stop send + 84d48000
  776. [ 22.030000] Set freq vap 2 stop send -84d48000
  777. [ 22.070000] Set wait done --84d48000
  778.  
  779. hotplug-call start ============
  780. hotplug-call param1 = block
  781. hotplug-call ACTION = add
  782. hotplug-call BUTTON =
  783. hotplug-call SEEN =
  784. hotplug-c[ 22.100000] device wl4 entered promiscuous mode
  785. all stop +++++++++++++
  786.  
  787. [ 22.110000]
  788. [ 22.110000] DES SSID SET=
  789. [ 22.120000] vap-2(wl4):set SIOC80211NWID, 32 characters
  790. [ 22.130000]
  791. [ 22.130000] DES SSID SET=874a5049fd2f93e03b81bd7348923d8a
  792.  
  793. hotplug-call start ============
  794. hotplug-call param1 = block
  795. hotplug-call ACTION = add
  796. hotplug-call BUTTON =
  797. hotplug-call SEEN =
  798. hotplug-call stop +++++++++++++
  799.  
  800.  
  801. hotplug-call start ============
  802. hotplug-call param1 = block
  803. hotplug-call ACTION = add
  804. hotplug-call BUTTON =
  805. hotplug-call SEEN =
  806. hotplug-call stop +++++++++++++
  807.  
  808.  
  809. hotplug-call start ============
  810. hotplug-call param1 = block
  811. hotplug-call ACTION = add
  812. hotplug-call BUTTON =
  813. hotplug-call SEEN =
  814. hotplug-call stop +++++++++++++
  815.  
  816.  
  817. hotplug-call start ============
  818. hotplug-call param1 = block
  819. hotplug-call ACTION = add
  820. hotplug-call BUTTON =
  821. hotplug-call SEEN =
  822. hotplug-call stop +++++++++++++
  823.  
  824.  
  825. hotplug-call start ============
  826. hotplug-call param1 = block
  827. hotplug-call ACTION = add
  828. hotplug-call BUTTON =
  829. hotplug-call SEEN =
  830. hotplug-call stop +++++++++++++
  831.  
  832.  
  833. hotplug-call start ============
  834. hotplug-call param1 = block
  835. hotplug-call ACTION = add
  836. hotplug-call BUTTON =
  837. hotplug-call SEEN =
  838. hotplug-call stop +++++++++++++
  839.  
  840.  
  841. hotplug-call start ============
  842. hotplug-call param1 = block
  843. hotplug-call ACTION = add
  844. hotplug-call BUTTON =
  845. hotplug-call SEEN =
  846. hotplug-call stop +++++++++++++
  847.  
  848.  
  849. hotplug-call start ============
  850. hotplug-call param1 = block
  851. hotplug-call ACTION = add
  852. hotplug-call BUTTON =
  853. hotplug-call SEEN =
  854. hotplug-call stop +++++++++++++
  855.  
  856. [ 23.280000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
  857. [ 23.290000] DEVICE IS DOWN ifname=wl0
  858. [ 23.290000] DEVICE IS DOWN ifname=wl0
  859.  
  860. hotplug-call start ============
  861. hotplug-call param1 = block
  862. hotplug-call ACTION = add
  863. hotplug-call BUTTON =
  864. hotplug-call SEEN =
  865. hotplug-call stop +++++++++++++
  866.  
  867. [ 23.460000] Warning: node not in table 0x84d58000
  868. [ 23.540000] br0: port 2(wl0) entered forwarding state
  869. [ 23.540000] br0: port 2(wl0) entered forwarding state
  870. [ 23.560000] 8021q: adding VLAN 0 to HW filter on device wl0
  871.  
  872. hotplug-call start ============
  873. hotplug-call param1 = net
  874. hotplug-call ACTION = add
  875. hotplug-call BUTTON =
  876. hotplug-call SEEN =
  877. hotplug-call stop +++++++++++++
  878.  
  879. [ 23.690000] ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1
  880. [ 23.700000] DEVICE IS DOWN ifname=wl4
  881. [ 23.710000] DEVICE IS DOWN ifname=wl4
  882.  
  883. hotplug-call start ============
  884. hotplug-call param1 = net
  885. hotplug-call ACTION = add
  886. hotplug-call BUTTON =
  887. hotplug-call SEEN =
  888. hotplug-call stop +++++++++++++
  889.  
  890.  
  891. hotplug-call start ============
  892. hotplug-call param1 = net
  893. hotplug-call ACTION = add
  894. hotplug-call BUTTON =
  895. hotplug-call SEEN =
  896. hotplug-call stop +++++++++++++
  897.  
  898. [ 23.870000] Warning: node not in table 0x84d5a000
  899. [ 23.910000] br0: port 3(wl4) entered forwarding state
  900. [ 23.910000] br0: port 3(wl4) entered forwarding state
  901. [ 23.920000] 8021q: adding VLAN 0 to HW filter on device wl4
  902. [ 23.940000] br0: port 1(eth0.1) entered disabled state
  903.  
  904. hotplug-call start ============
  905. hotplug-call param1 = net
  906. hotplug-call ACTION = add
  907. hotplug-call BUTTON =
  908. hotplug-call SEEN =
  909. hotplug-call stop +++++++++++++
  910.  
  911. [ 24.010000] isCountryCodeValid: EEPROM regdomain 0x0
  912. [ 24.020000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  913. [ 24.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  914. [ 24.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  915. [ 24.040000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  916. [ 24.050000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  917. [ 24.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  918. [ 24.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  919. [ 24.070000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  920. [ 24.080000] Add VHT80 channel: 5210
  921. [ 24.080000] Add VHT80 channel: 5290
  922. [ 24.090000] Add VHT80 channel: 5530
  923. [ 24.090000] Add VHT80 channel: 5610
  924. [ 24.090000] Add VHT80 channel: 5690
  925. [ 24.100000] Add VHT80 channel: 5775
  926. [ 24.100000] Skipping VHT80 channel 5825
  927. [ 24.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
  928. [ 24.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
  929.  
  930. hotplug-call start ============
  931. hotplug-call param1 = net
  932. hotplug-call ACTION = add
  933. hotplug-call BUTTON =
  934. hotplug-call SEEN[ 24.140000] wlan_vap_create : enter. devhandle=0x872c0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  935. =
  936. hotplug-cal[ 24.150000] wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 00:80:ae:ae:8a:b6:
  937. l stop +++++++++[ 24.160000] ieee80211_mbo_vattach:MBO Initialized
  938. ++++
  939.  
  940. [ 24.170000] wlan_vap_create : exit. devhandle=0x872c0380, vap=0x84da8000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  941. [ 24.180000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  942. [ 24.190000] VAP device wl1 created osifp: (84d46b80) os_if: (84da8000)
  943.  
  944. hotplug-call start ============
  945. hotplug-call param1 = net
  946. hotplug-call ACTION = add
  947. hotplug-call BUTTON =
  948. hotplug-call SEEN =
  949. hotplug-call stop +++++++++++++
  950.  
  951. [ 24.310000] siwfreq
  952. [ 24.310000] Set freq vap 0 stop send + 84da8000
  953. [ 24.320000] Set freq vap 0 stop send -84da8000
  954.  
  955. hotplug-call start ============
  956. hotplug-call param1 = net
  957. hotplug-call ACTION = add
  958. hotplug-call BUTTON =
  959. hotplug-call SEEN =
  960. hotplug-call stop +++++++++[ 24.350000] Set wait done --84da8000
  961. ++++
  962.  
  963. [ 24.360000] device wl1 entered promiscuous mode
  964. [ 24.380000]
  965. [ 24.380000] DES SSID SET=
  966. [ 24.390000] vap-0(wl1):set SIOC80211NWID, 11 characters
  967. [ 24.400000]
  968. [ 24.400000] DES SSID SET=hug5g933927
  969.  
  970. hotplug-call start ============
  971. hotplug-call param1 = net
  972. hotplug-call ACTION = add
  973. hotplug-call BUTTON =
  974. hotplug-call SEEN =
  975. hotplug-call stop +++++++++++++
  976.  
  977. [ 24.450000] wlan_vap_create : enter. devhandle=0x872c0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  978. [ 24.460000] wmi_unified_vdev_create_send: ID = 1 Type = 1, Subtype = 0 VAP Addr = 06:80:ae:ae:8a:b6:
  979. [ 24.470000] ieee80211_mbo_vattach:MBO Initialized
  980. [ 24.470000] wlan_vap_create : exit. devhandle=0x872c0380, vap=0x84dc8000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  981. [ 24.480000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  982. [ 24.490000] VAP device wl3 created osifp: (84db8380) os_if: (84dc8000)
  983. [ 24.510000] wlan_vap_create : enter. devhandle=0x872c0380, opmode=IEEE80211_M_HOSTAP, flags=0x1
  984. [ 24.510000] wmi_unified_vdev_create_send: ID = 2 Type = 1, Subtype = 0 VAP Addr = 0a:80:ae:ae:8a:b6:
  985. [ 24.520000] ieee80211_mbo_vattach:MBO Initialized
  986. [ 24.530000] wlan_vap_create : exit. devhandle=0x872c0380, vap=0x84de0000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  987. [ 24.540000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  988. [ 24.550000] VAP device wl5 created osifp: (84dba380) os_if: (84de0000)
  989.  
  990. hotplug-call start ============
  991. hotplug-call param1 = net
  992. hotplug-call ACTION = add
  993. hotplug-call BUTTON =
  994. hotplug-call SEEN =
  995. hotplug-call stop +++++++++++++
  996.  
  997. [ 24.640000] siwfreq
  998. [ 24.640000] Set freq vap 2 stop send + 84da8000
  999. [ 24.640000] Set freq vap 2 stop send -84da8000
  1000.  
  1001. hotplug-call start ============
  1002. hotplug-call param1 = net
  1003. hotp[ 24.680000] Set wait done --84da8000
  1004. lug-call ACTION [ 24.680000] Set freq vap 2 stop send + 84dc8000
  1005. = add
  1006. hotplug-c[ 24.690000] Set freq vap 2 stop send -84dc8000
  1007. all BUTTON =
  1008. hotplug-call SEEN =
  1009. hotplug-call stop +++++++++++++
  1010.  
  1011. [ 24.720000] Set wait done --84dc8000
  1012. [ 24.720000] Set freq vap 2 stop send + 84de0000
  1013. [ 24.720000] Set freq vap 2 stop send -84de0000
  1014. [ 24.740000] [wifi1] FWLOG: [40116] WHAL_ERROR_RESET_CHANNF1 ( )
  1015. [ 24.760000] Set wait done --84de0000
  1016.  
  1017. hotplug-call start ============
  1018. hotplug-call param1 = net
  1019. hotplug-call ACTION [ 24.780000] device wl5 entered promiscuous mode
  1020. = add
  1021. hotplug-call BUTTON =
  1022. hotplug-call SEEN =
  1023. hotplug-call stop +++++++++++++
  1024.  
  1025. [ 24.800000]
  1026. [ 24.800000] DES SSID SET=
  1027. [ 24.820000] vap-2(wl5):set SIOC80211NWID, 32 characters
  1028. [ 24.820000]
  1029. [ 24.820000] DES SSID SET=bda035b86e93800b109988a48088feb0
  1030.  
  1031. hotplug-call start ============
  1032. hotplug-call param1 = net
  1033. hotplug-call ACTION = add
  1034. hotplug-call BUTTON =
  1035. hotplug-call SEEN =
  1036. hotplug-call stop +++++++++++++
  1037.  
  1038. [ 24.900000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
  1039. [ 24.910000] DEVICE IS DOWN ifname=wl1
  1040. [ 24.910000] DEVICE IS DOWN ifname=wl1
  1041.  
  1042. hotplug-call start ============
  1043. hotplug-call param1 = net
  1044. hotplug-call ACTION = add
  1045. hotplug-call BUTTON =
  1046. hotplug-call SEEN =
  1047. hotplug-call stop +++++++++++++
  1048.  
  1049.  
  1050. hotplug-call start ============
  1051. hotplug-call param1 = net
  1052. hotplug-call ACTION = add
  1053. hotplug-call BUTTON =
  1054. hotplug-call SEEN =
  1055. hotplug-call stop +++++++++++++
  1056.  
  1057. [ 25.100000] br0: port 4(wl1) entered forwarding state
  1058. [ 25.100000] br0: port 4(wl1) entered forwarding state
  1059. [ 25.110000] 8021q: adding VLAN 0 to HW filter on device wl1
  1060. [ 25.160000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
  1061. [ 25.170000] DEVICE IS DOWN ifname=wl5
  1062. [ 25.170000] DEVICE IS DOWN ifname=wl5
  1063. [ 25.320000] osif_vap_init: Scan in progress.. Cancelling it. vap: 0x84de0000
  1064. [ 25.360000] br0: port 5(wl5) entered forwarding state
  1065. [ 25.360000] br0: port 5(wl5) entered forwarding state
  1066. [ 25.370000] 8021q: adding VLAN 0 to HW filter on device wl5
  1067. [ 25.740000] [wifi1] FWLOG: [41050] WAL_DBGID_SECURITY_ENCR_EN ( )
  1068. [ 25.750000] [wifi1] FWLOG: [41050] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
  1069. [ 25.750000] [wifi1] FWLOG: [41299] WAL_DBGID_SECURITY_ENCR_EN ( )
  1070. [ 25.760000] [wifi1] FWLOG: [41299] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
  1071. [ 25.770000] [wifi1] FWLOG: [41307] SCAN_STOP_COMMAND_FAILED ( 0x2, 0x1000000, 0x0 )
  1072. [ 25.940000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1073. Set alias interface eth0.2:1 for eth0.2 with IP 192.168.0.254 netmask 255.255.255.0
  1074. [ 26.210000] ADDRCONF(NETDEV_UP): br1: link is not ready
  1075. ext_ifname=eth0.2
  1076. start miniupnpd
  1077. [ 32.300000] wmi_unified_vdev_down_send for vap 0 (867f0000)
  1078. [ 32.300000] OL vap_start +
  1079. [ 32.310000] wmi_unified_vdev_start_send for vap 0 (867f0000)
  1080. [ 32.310000] OL vap_start -
  1081. [ 32.320000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
  1082. [ 32.320000] OL vap_start +
  1083. [ 32.330000] wmi_unified_vdev_start_send for vap 2 (867f0000)
  1084. [ 32.330000] OL vap_start -
  1085. [ 32.340000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
  1086. [ 32.340000] ol_vdev_start_resp_ev for vap 0 (867f0000)
  1087. [ 32.350000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 0
  1088. [ 32.360000] wmi_unified_vdev_up_send for vap 0 (867f0000)
  1089. [ 32.360000] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1090. [ 32.370000] ol_vdev_start_resp_ev for vap 2 (867f0000)
  1091. [ 32.380000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 0
  1092. [ 32.380000] wmi_unified_vdev_up_send for vap 2 (867f0000)
  1093. [ 33.910000] wmi_unified_vdev_stop_send for vap 0 (867f0000)
  1094. [ 33.920000] STOPPED EVENT for vap 0 (867f0000)
  1095. [ 33.930000] wmi_unified_vdev_down_send for vap 0 (867f0000)
  1096. [ 34.020000] OL vap_start +
  1097. [ 34.030000] wmi_unified_vdev_start_send for vap 0 (867f0000)
  1098. [ 34.030000] OL vap_start -
  1099. [ 34.030000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
  1100. [ 34.130000] ol_vdev_start_resp_ev for vap 0 (867f0000)
  1101. [ 34.130000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 0
  1102. [ 34.140000] wmi_unified_vdev_up_send for vap 0 (867f0000)
  1103. [ 34.240000] sc nodebug 0
  1104. wan_idx=0 restart bridge mode
  1105. wan_idx=0 start bridge qos
  1106. Call Update Tr69 Rule.
  1107. The reason is PREINIT6, the interface is eth0.2 and the stateless is 1.
  1108. ##{"luiHdr":{"SAN":"--", "ESN":"12372954" }}##
  1109. ##{"SAN":"--", "ESN":"12372954" }}##
  1110. Parse json ok!
  1111. [ 150.190000] ht2000w_devconnect_proc_write:122 ht2000w_devconnect_enable=1
  1112.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!