=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Serial Number:    01C90759089D00075769
Firmware Version: SAFM01.7
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Jul 10 20:16:37 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   30) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.

                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -
       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -
       1116
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -
       413
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -
       105271
170 Unknown_Attribute       0x0003   100   100   010    Pre-fail  Always       -
       682
173 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -
       327695
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -
       175
194 Temperature_Celsius     0x0023   070   070   030    Pre-fail  Always       -
       30 (Min/Max 29/30)
218 Unknown_Attribute       0x000b   100   100   050    Pre-fail  Always       -
       52585
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -
       100
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -
       978

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA
_of_first_error
# 1  Short offline       Completed without error       00%       968         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.