7206#sh ip ospf interface g0/1.509
GigabitEthernet0/1.509 is up, line protocol is up
  Internet Address xx.xx.xx.5/30, Area 0
  Process ID YYYYY, Router ID xx.xx.xx.xx, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State BDR, Priority 1
  Designated Router (ID) xx.xx.xx.xx, Interface address xx.xx.xx.xx
  Backup Designated router (ID) xx.xx.xx.xx, Interface address xx.xx.xx.xx
  Flush timer for old DR LSA due in 00:02:16
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:06
  Supports Link-local Signaling (LLS)
  Index 47/47, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 1, maximum is 31
  Last flood scan time is 0 msec, maximum is 32 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor xx.xx.xx.xx  (Designated Router)
  Suppress hello for 0 neighbor(s)

2801#sh ip ospf interface f0/0.509
FastEthernet0/0.509 is up, line protocol is up
  Internet Address xx.xx.xx.6/30, Area 0, Attached via Network Statement
  Process ID ZZZZZ, Router ID xx.xx.xx.xx, Network Type BROADCAST, Cost: 10
  Topology-MTID    Cost    Disabled    Shutdown      Topology Name
        0           10        no          no            Base
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) xx.xx.xx.xx, Interface address xx.xx.xx.6
  Backup Designated router (ID) xx.xx.xx.xx, Interface address xx.xx.xx.5
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    oob-resync timeout 40
    Hello due in 00:00:04
  Supports Link-local Signaling (LLS)
  Cisco NSF helper support enabled
  IETF NSF helper support enabled
  Index 9/9, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 0, maximum is 15
  Last flood scan time is 0 msec, maximum is 4 msec
  Neighbor Count is 1, Adjacent neighbor count is 1
    Adjacent with neighbor xx.xx.xx.xx  (Backup Designated Router)
  Suppress hello for 0 neighbor(s)