API tools faq
paste
WalterHWhite

Raspbian Buster on 2B

WalterHWhite
Jul 23rd, 2019
541
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.29 KB | None | 0 0
raw download clone embed print report
  1. hbarta@raspigold4gb:~ $ raspinfo
  2. System Information
  3. ------------------
  4.  
  5. Raspberry Pi 2 Model B Rev 1.1
  6. PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
  7. NAME="Raspbian GNU/Linux"
  8. VERSION_ID="10"
  9. VERSION="10 (buster)"
  10.  
  11. Raspberry Pi reference 2019-07-10
  12. Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 175dfb027ffabd4b8d5080097af0e51ed9a4a56c, stage2
  13.  
  14. Linux raspigold4gb 4.19.58-v7+ #1245 SMP Fri Jul 12 17:25:51 BST 2019 armv7l GNU/Linux
  15. Hardware : BCM2835
  16. Revision : a21041
  17. Serial : 00000000f5aae62f
  18. Throttled flag : throttled=0x0
  19. Camera : supported=0 detected=0
  20.  
  21. Videocore information
  22. ---------------------
  23.  
  24. Jul 9 2019 14:40:53
  25. Copyright (c) 2012 Broadcom
  26. version 6c3fe3f096a93de3b34252ad98cdccadeb534be2 (clean) (release) (start)
  27.  
  28. alloc failures: 0
  29. compactions: 0
  30. legacy block fails: 0
  31.  
  32. Filesystem information
  33. ----------------------
  34. Filesystem 1K-blocks Used Available Use% Mounted on
  35. /dev/root 3528944 1221668 2131072 37% /
  36. devtmpfs 469544 0 469544 0% /dev
  37. tmpfs 474152 0 474152 0% /dev/shm
  38. tmpfs 474152 6380 467772 2% /run
  39. tmpfs 5120 4 5116 1% /run/lock
  40. tmpfs 474152 0 474152 0% /sys/fs/cgroup
  41. /dev/mmcblk0p1 258096 39973 218123 16% /boot
  42. tmpfs 94828 0 94828 0% /run/user/1000
  43.  
  44. Filename Type Size Used Priority
  45. /var/swap file 102396 0 -2
  46.  
  47. Package version information
  48. ---------------------------
  49. raspberrypi-ui-mods:
  50. Installed: (none)
  51. raspberrypi-sys-mods:
  52. Installed: 20190722
  53. openbox:
  54. Installed: (none)
  55. lxpanel:
  56. Installed: (none)
  57. pcmanfm:
  58. Installed: (none)
  59. rpd-plym-splash:
  60. Installed: (none)
  61.  
  62. Networking Information
  63. ----------------------
  64.  
  65. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  66. inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
  67. inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
  68. inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
  69. inet6 2601:249:e00:y::y.y.y.y prefixlen 128 scopeid 0x0<global>
  70. ether m.m.m.m txqueuelen 1000 (Ethernet)
  71. RX packets 576 bytes 62549 (61.0 KiB)
  72. RX errors 0 dropped 0 overruns 0 frame 0
  73. TX packets 433 bytes 92651 (90.4 KiB)
  74. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  75.  
  76. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  77. inet x.x.x.x netmask x.x.x.x
  78. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  79. loop txqueuelen 1000 (Local Loopback)
  80. RX packets 0 bytes 0 (0.0 B)
  81. RX errors 0 dropped 0 overruns 0 frame 0
  82. TX packets 0 bytes 0 (0.0 B)
  83. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  84.  
  85. wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
  86. ether m.m.m.m txqueuelen 1000 (Ethernet)
  87. RX packets 0 bytes 0 (0.0 B)
  88. RX errors 0 dropped 0 overruns 0 frame 0
  89. TX packets 0 bytes 0 (0.0 B)
  90. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  91.  
  92.  
  93. USB Information
  94. ---------------
  95.  
  96. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
  97. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
  98. |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
  99. |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
  100. |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  101. |__ Port 2: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
  102. |__ Port 3: Dev 5, If 2, Class=Human Interface Device, Driver=usbhid, 12M
  103. |__ Port 3: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M
  104. |__ Port 3: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  105. |__ Port 5: Dev 6, If 0, Class=Vendor Specific Class, Driver=r8188eu, 480M
  106.  
  107. config.txt
  108. ----------
  109.  
  110. aphy_params_current=819
  111. arm_freq=900
  112. audio_pwm_mode=514
  113. config_hdmi_boost=5
  114. disable_auto_turbo=1
  115. disable_commandline_tags=2
  116. disable_l2cache=1
  117. display_hdmi_rotate=-1
  118. display_lcd_rotate=-1
  119. dphy_params_current=547
  120. enable_uart=1
  121. force_eeprom_read=1
  122. force_pwm_open=1
  123. framebuffer_ignore_alpha=1
  124. framebuffer_swap=1
  125. init_uart_clock=0x2dc6c00
  126. lcd_framerate=60
  127. over_voltage_avs=0x1b774
  128. pause_burst_frames=1
  129. program_serial_random=1
  130. sdram_freq=450
  131. hdmi_force_cec_address:0=65535
  132. hdmi_force_cec_address:1=65535
  133. hdmi_pixel_freq_limit:0=0x9a7ec80
  134. hdmi_pixel_freq_limit:1=0x9a7ec80
  135. device_tree=-
  136. hdmi_cvt:0=
  137. hdmi_cvt:1=
  138. hdmi_edid_filename:0=
  139. hdmi_edid_filename:1=
  140. hdmi_timings:0=
  141. hdmi_timings:1=
  142.  
  143. cmdline.txt
  144. -----------
  145. coherent_pool=1M bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=569dd900-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  146.  
  147. raspi-gpio settings
  148. -------------------
  149.  
  150. BANK0 (GPIO 0 to 27):
  151. GPIO 0: level=1 fsel=0 func=INPUT
  152. GPIO 1: level=1 fsel=0 func=INPUT
  153. GPIO 2: level=1 fsel=0 func=INPUT
  154. GPIO 3: level=1 fsel=0 func=INPUT
  155. GPIO 4: level=1 fsel=0 func=INPUT
  156. GPIO 5: level=1 fsel=0 func=INPUT
  157. GPIO 6: level=1 fsel=0 func=INPUT
  158. GPIO 7: level=1 fsel=0 func=INPUT
  159. GPIO 8: level=1 fsel=0 func=INPUT
  160. GPIO 9: level=0 fsel=0 func=INPUT
  161. GPIO 10: level=0 fsel=0 func=INPUT
  162. GPIO 11: level=0 fsel=0 func=INPUT
  163. GPIO 12: level=0 fsel=0 func=INPUT
  164. GPIO 13: level=0 fsel=0 func=INPUT
  165. GPIO 14: level=1 fsel=4 alt=0 func=TXD0
  166. GPIO 15: level=1 fsel=4 alt=0 func=RXD0
  167. GPIO 16: level=0 fsel=0 func=INPUT
  168. GPIO 17: level=0 fsel=0 func=INPUT
  169. GPIO 18: level=0 fsel=0 func=INPUT
  170. GPIO 19: level=0 fsel=0 func=INPUT
  171. GPIO 20: level=0 fsel=0 func=INPUT
  172. GPIO 21: level=0 fsel=0 func=INPUT
  173. GPIO 22: level=0 fsel=0 func=INPUT
  174. GPIO 23: level=0 fsel=0 func=INPUT
  175. GPIO 24: level=0 fsel=0 func=INPUT
  176. GPIO 25: level=0 fsel=0 func=INPUT
  177. GPIO 26: level=0 fsel=0 func=INPUT
  178. GPIO 27: level=0 fsel=0 func=INPUT
  179. BANK1 (GPIO 28 to 45):
  180. GPIO 28: level=1 fsel=0 func=INPUT
  181. GPIO 29: level=1 fsel=0 func=INPUT
  182. GPIO 30: level=0 fsel=0 func=INPUT
  183. GPIO 31: level=1 fsel=1 func=OUTPUT
  184. GPIO 32: level=0 fsel=1 func=OUTPUT
  185. GPIO 33: level=0 fsel=0 func=INPUT
  186. GPIO 34: level=1 fsel=0 func=INPUT
  187. GPIO 35: level=1 fsel=0 func=INPUT
  188. GPIO 36: level=1 fsel=0 func=INPUT
  189. GPIO 37: level=0 fsel=0 func=INPUT
  190. GPIO 38: level=1 fsel=1 func=OUTPUT
  191. GPIO 39: level=0 fsel=0 func=INPUT
  192. GPIO 40: level=0 fsel=4 alt=0 func=PWM0
  193. GPIO 41: level=0 fsel=1 func=OUTPUT
  194. GPIO 42: level=1 fsel=1 func=OUTPUT
  195. GPIO 43: level=1 fsel=0 func=INPUT
  196. GPIO 44: level=1 fsel=4 alt=0 func=GPCLK1
  197. GPIO 45: level=0 fsel=4 alt=0 func=PWM1
  198. BANK2 (GPIO 46 to 53):
  199. GPIO 46: level=0 fsel=0 func=INPUT
  200. GPIO 47: level=0 fsel=1 func=OUTPUT
  201. GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
  202. GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
  203. GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
  204. GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
  205. GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
  206. GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3
  207.  
  208. vcdbg log messages
  209. ------------------
  210.  
  211. 001908.220: brfs: File read: /mfs/sd/config.txt
  212. 001909.202: brfs: File read: 1735 bytes
  213. 001961.274: brfs: File read: /mfs/sd/config.txt
  214. 001962.229: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  215. 001972.208: gpioman: gpioman_get_pin_num: pin WL_LPO_CLK not defined
  216. 001972.275: gpioman: gpioman_get_pin_num: pin BT_ON not defined
  217. 001972.335: gpioman: gpioman_get_pin_num: pin WL_ON not defined
  218. 002147.108: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
  219. 002148.377: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  220. 002148.460: *** Restart logging
  221. 002148.525: brfs: File read: 1735 bytes
  222. 002165.617: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  223. 002167.608: brfs: File read: /mfs/sd/cmdline.txt
  224. 002167.701: Read command line from file 'cmdline.txt':
  225. 002167.759: 'dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=569dd900-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
  226. 002168.069: brfs: File read: 142 bytes
  227. 002726.859: brfs: File read: /mfs/sd/kernel7.img
  228. 002726.924: Loading 'kernel7.img' to 0x8000 size 0x50dc28
  229. 002731.326: No kernel trailer - assuming DT-capable
  230. 002731.411: brfs: File read: 5299240 bytes
  231. 002739.526: brfs: File read: /mfs/sd/bcm2709-rpi-2-b.dtb
  232. 002739.593: Loading 'bcm2709-rpi-2-b.dtb' to 0x515c28 size 0x62cd
  233. 002898.749: brfs: File read: 25293 bytes
  234. 002904.964: brfs: File read: /mfs/sd/config.txt
  235. 002905.591: dtparam: audio=on
  236. 004804.463: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
  237. 004894.422: Device tree loaded to 0x2eff9900 (size 0x66a4)
  238. 004896.186: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  239. 006491.561: vchiq_core: vchiq_init_state: slot_zero = 0xfad80000, is_master = 1
  240. 006496.555: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  241. 006502.568: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000033
  242. 014575.421: brfs: File read: 1735 bytes
  243.  
  244. dmesg log
  245. ---------
  246.  
  247. [ 0.000000] Booting Linux on physical CPU 0xf00
  248. [ 0.000000] Linux version 4.19.58-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1245 SMP Fri Jul 12 17:25:51 BST 2019
  249. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  250. [ 0.000000] CPU: div instructions available: patching division code
  251. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  252. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
  253. [ 0.000000] Memory policy: Data cache writealloc
  254. [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
  255. [ 0.000000] On node 0 totalpages: 242688
  256. [ 0.000000] Normal zone: 2133 pages used for memmap
  257. [ 0.000000] Normal zone: 0 pages reserved
  258. [ 0.000000] Normal zone: 242688 pages, LIFO batch:63
  259. [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
  260. [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
  261. [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
  262. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  263. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
  264. [ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=569dd900-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  265. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  266. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  267. [ 0.000000] Memory: 939092K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23468K reserved, 8192K cma-reserved)
  268. [ 0.000000] Virtual kernel memory layout:
  269. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  270. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  271. vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
  272. lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
  273. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  274. .text : 0x(ptrval) - 0x(ptrval) (9184 kB)
  275. .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  276. .data : 0x(ptrval) - 0x(ptrval) ( 630 kB)
  277. .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB)
  278. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  279. [ 0.000000] ftrace: allocating 26351 entries in 78 pages
  280. [ 0.000000] rcu: Hierarchical RCU implementation.
  281. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  282. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  283. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  284. [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  285. [ 0.000030] Switching to timer-based delay loop, resolution 52ns
  286. [ 0.000368] Console: colour dummy device 80x30
  287. [ 0.001083] console [tty1] enabled
  288. [ 0.001158] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  289. [ 0.001213] pid_max: default: 32768 minimum: 301
  290. [ 0.001664] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  291. [ 0.001712] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  292. [ 0.002975] CPU: Testing write buffer coherency: ok
  293. [ 0.003698] CPU0: update cpu_capacity 1024
  294. [ 0.003740] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  295. [ 0.004785] Setting up static identity map for 0x100000 - 0x10003c
  296. [ 0.005057] rcu: Hierarchical SRCU implementation.
  297. [ 0.006274] smp: Bringing up secondary CPUs ...
  298. [ 0.007609] CPU1: update cpu_capacity 1024
  299. [ 0.007621] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  300. [ 0.009059] CPU2: update cpu_capacity 1024
  301. [ 0.009072] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  302. [ 0.010510] CPU3: update cpu_capacity 1024
  303. [ 0.010521] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  304. [ 0.010694] smp: Brought up 1 node, 4 CPUs
  305. [ 0.010853] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  306. [ 0.010881] CPU: All CPU(s) started in HYP mode.
  307. [ 0.010905] CPU: Virtualization extensions available.
  308. [ 0.012234] devtmpfs: initialized
  309. [ 0.027598] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  310. [ 0.028020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  311. [ 0.028088] futex hash table entries: 1024 (order: 4, 65536 bytes)
  312. [ 0.028984] pinctrl core: initialized pinctrl subsystem
  313. [ 0.030428] NET: Registered protocol family 16
  314. [ 0.034021] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  315. [ 0.041384] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  316. [ 0.041443] hw-breakpoint: maximum watchpoint size is 8 bytes.
  317. [ 0.041736] Serial: AMBA PL011 UART driver
  318. [ 0.044743] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  319. [ 0.089243] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  320. [ 0.091590] SCSI subsystem initialized
  321. [ 0.091944] usbcore: registered new interface driver usbfs
  322. [ 0.092048] usbcore: registered new interface driver hub
  323. [ 0.092231] usbcore: registered new device driver usb
  324. [ 0.110300] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:40, variant start
  325. [ 0.120558] raspberrypi-firmware soc:firmware: Firmware hash is 6c3fe3f096a93de3b34252ad98cdccadeb534be2
  326. [ 0.132402] clocksource: Switched to clocksource arch_sys_counter
  327. [ 0.235278] VFS: Disk quotas dquot_6.6.0
  328. [ 0.235429] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  329. [ 0.235736] FS-Cache: Loaded
  330. [ 0.236097] CacheFiles: Loaded
  331. [ 0.250561] NET: Registered protocol family 2
  332. [ 0.251697] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  333. [ 0.251783] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  334. [ 0.251939] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  335. [ 0.252152] TCP: Hash tables configured (established 8192 bind 8192)
  336. [ 0.252368] UDP hash table entries: 512 (order: 2, 16384 bytes)
  337. [ 0.252579] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  338. [ 0.253098] NET: Registered protocol family 1
  339. [ 0.254039] RPC: Registered named UNIX socket transport module.
  340. [ 0.254082] RPC: Registered udp transport module.
  341. [ 0.254108] RPC: Registered tcp transport module.
  342. [ 0.254133] RPC: Registered tcp NFSv4.1 backchannel transport module.
  343. [ 0.256270] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  344. [ 0.260400] Initialise system trusted keyrings
  345. [ 0.260793] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  346. [ 0.273797] FS-Cache: Netfs 'nfs' registered for caching
  347. [ 0.274662] NFS: Registering the id_resolver key type
  348. [ 0.274727] Key type id_resolver registered
  349. [ 0.274754] Key type id_legacy registered
  350. [ 0.274793] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  351. [ 0.278118] Key type asymmetric registered
  352. [ 0.278163] Asymmetric key parser 'x509' registered
  353. [ 0.278277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  354. [ 0.278543] io scheduler noop registered
  355. [ 0.278580] io scheduler deadline registered (default)
  356. [ 0.278865] io scheduler cfq registered
  357. [ 0.278898] io scheduler mq-deadline registered (default)
  358. [ 0.278927] io scheduler kyber registered
  359. [ 0.281413] bcm2708_fb soc:fb: FB found 1 display(s)
  360. [ 0.339613] Console: switching to colour frame buffer device 200x75
  361. [ 0.373993] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1600x1200
  362. [ 0.377160] bcm2835-rng 3f104000.rng: hwrng registered
  363. [ 0.377725] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  364. [ 0.378840] vc-sm: Videocore shared memory driver
  365. [ 0.379479] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  366. [ 0.396314] brd: module loaded
  367. [ 0.41131hbarta@raspigold4gb:~ $ 4] loop: module loaded
  368. [ 0.412291] Loading iSCSI transport class v2.0-870.
  369. [ 0.413700] libphy: Fixed MDIO Bus: probed
  370. [ 0.414022] usbcore: registered new interface driver lan78xx
  371. [ 0.414294] usbcore: registered new interface driver smsc95xx
  372. [ 0.414503] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  373. [ 0.442648] dwc_otg 3f980000.usb: base=(ptrval)
  374. [ 0.643212] Core Release: 2.80a
  375. [ 0.643351] Setting default values for core params
  376. [ 0.643553] Finished setting default values for core params
  377. [ 0.844152] Using Buffer DMA mode
  378. [ 0.844288] Periodic Transfer Interrupt Enhancement - disabled
  379. [ 0.844479] Multiprocessor Interrupt Enhancement - disabled
  380. [ 0.844662] OTG VER PARAM: 0, OTG VER FLAG: 0
  381. [ 0.844829] Dedicated Tx FIFOs mode
  382. [ 0.845685] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024
  383. [ 0.846027] FIQ FSM acceleration enabled for :
  384. Non-periodic Split Transactions
  385. Periodic Split Transactions
  386. High-Speed Isochronous Endpoints
  387. Interrupt/Control Split Transaction hack enabled
  388. [ 0.846699] dwc_otg: Microframe scheduler enabled
  389. [ 0.846787] WARN::hcd_init_fiq:457: FIQ on core 1
  390. [ 0.846964] WARN::hcd_init_fiq:458: FIQ ASM at 80650e04 length 36
  391. [ 0.847174] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
  392. [ 0.847385] dwc_otg 3f980000.usb: DWC OTG Controller
  393. [ 0.847601] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  394. [ 0.847883] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
  395. [ 0.848114] Init: Port Power? op_state=1
  396. [ 0.848251] Init: Power Port (0)
  397. [ 0.848761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  398. [ 0.849037] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  399. [ 0.849273] usb usb1: Product: DWC OTG Controller
  400. [ 0.849435] usb usb1: Manufacturer: Linux 4.19.58-v7+ dwc_otg_hcd
  401. [ 0.849636] usb usb1: SerialNumber: 3f980000.usb
  402. [ 0.860057] hub 1-0:1.0: USB hub found
  403. [ 0.869448] hub 1-0:1.0: 1 port detected
  404. [ 0.879494] dwc_otg: FIQ enabled
  405. [ 0.879503] dwc_otg: NAK holdoff enabled
  406. [ 0.879510] dwc_otg: FIQ split-transaction FSM enabled
  407. [ 0.879527] Module dwc_common_port init
  408. [ 0.879991] usbcore: registered new interface driver usb-storage
  409. [ 0.889596] mousedev: PS/2 mouse device common for all mice
  410. [ 0.900012] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  411. [ 0.909625] bcm2835-cpufreq: min=600000 max=900000
  412. [ 0.919505] sdhci: Secure Digital Host Controller Interface driver
  413. [ 0.928832] sdhci: Copyright(c) Pierre Ossman
  414. [ 0.938761] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  415. [ 0.948473] sdhci-pltfm: SDHCI platform and OF driver helper
  416. [ 0.958848] ledtrig-cpu: registered to indicate activity on CPUs
  417. [ 0.968455] hidraw: raw HID events driver (C) Jiri Kosina
  418. [ 0.978146] usbcore: registered new interface driver usbhid
  419. [ 0.987584] usbhid: USB HID core driver
  420. [ 0.998125] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  421. [ 1.009755] [vc_sm_connected_init]: start
  422. [ 1.020459] [vc_sm_connected_init]: end - returning 0
  423. [ 1.031639] Initializing XFRM netlink socket
  424. [ 1.041145] NET: Registered protocol family 17
  425. [ 1.050647] Key type dns_resolver registered
  426. [ 1.060424] Registering SWP/SWPB emulation handler
  427. [ 1.070800] registered taskstats version 1
  428. [ 1.080045] Loading compiled-in X.509 certificates
  429. [ 1.098958] uart-pl011 3f201000.serial: cts_event_workaround enabled
  430. [ 1.102795] Indeed it is in host mode hprt0 = 00021501
  431. [ 1.108558] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
  432. [ 1.206545] random: fast init done
  433. [ 1.231419] console [ttyAMA0] enabled
  434. [ 1.322449] usb 1-1: new high-speed USB device number 2 using dwc_otg
  435. [ 2.147051] Indeed it is in host mode hprt0 = 00001101
  436. [ 2.147118] sdhost: log_buf @ (ptrval) (fad13000)
  437. [ 2.223338] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  438. [ 2.240304] of_cfs_init
  439. [ 2.252718] of_cfs_init: OK
  440. [ 2.266017] Waiting for root device PARTUUID=569dd900-02...
  441. [ 2.298210] mmc0: host does not support reading read-only switch, assuming write-enable
  442. [ 2.318156] mmc0: new high speed SDHC card at address 1234
  443. [ 2.334728] mmcblk0: mmc0:1234 SA04G 3.71 GiB
  444. [ 2.352240] mmcblk0: p1 p2
  445. [ 2.392947] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
  446. [ 2.410787] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  447. [ 2.412293] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  448. [ 2.445502] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  449. [ 2.446090] hub 1-1:1.0: USB hub found
  450. [ 2.475092] devtmpfs: mounted
  451. [ 2.475873] hub 1-1:1.0: 5 ports detected
  452. [ 2.504050] Freeing unused kernel memory: 1024K
  453. [ 2.532803] Run /sbin/init as init process
  454. [ 2.822480] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  455. [ 2.962913] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
  456. [ 2.981262] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  457. [ 3.001618] smsc95xx v1.0.6
  458. [ 3.107300] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m
  459. [ 3.222545] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
  460. [ 3.367480] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=0132, bcdDevice= 1.10
  461. [ 3.386079] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
  462. [ 3.403551] usb 1-1.2: Product: USB Keyboard
  463. [ 3.417926] usb 1-1.2: SerialNumber: 000000000008
  464. [ 3.436465] systemd[1]: System time before build time, advancing clock.
  465. [ 3.454613] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0132.0001/input/input0
  466. [ 3.543392] hid-generic 0003:04D9:0132.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-3f980000.usb-1.2/input0
  467. [ 3.569875] hid-generic 0003:04D9:0132.0002: hiddev96,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-3f980000.usb-1.2/input1
  468. [ 3.601134] input: USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0003/input/input1
  469. [ 3.657926] NET: Registered protocol family 10
  470. [ 3.675884] Segment Routing with IPv6
  471. [ 3.692800] input: USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0003/input/input2
  472. [ 3.717728] input: USB Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0003/input/input3
  473. [ 3.742253] input: USB Keyboard Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:04D9:0132.0003/input/input4
  474. [ 3.766903] hid-generic 0003:04D9:0132.0003: input,hidraw2: USB HID v1.11 Mouse [USB Keyboard] on usb-3f980000.usb-1.2/input2
  475. [ 3.767043] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  476. [ 3.838000] systemd[1]: Detected architecture arm.
  477. [ 3.892477] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
  478. [ 3.935297] systemd[1]: Set hostname to <raspigold4gb>.
  479. [ 3.972239] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
  480. [ 3.999267] random: crng init done
  481. [ 4.033107] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.07
  482. [ 4.054267] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  483. [ 4.074799] usb 1-1.3: Product: USB Receiver
  484. [ 4.093230] usb 1-1.3: Manufacturer: Logitech
  485. [ 4.232574] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
  486. [ 4.290385] uart-pl011 3f201000.serial: no DMA platform data
  487. [ 4.403353] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
  488. [ 4.424706] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  489. [ 4.444728] usb 1-1.5: Product: 802.11n NIC
  490. [ 4.461560] usb 1-1.5: Manufacturer: Realtek
  491. [ 4.478483] usb 1-1.5: SerialNumber: 00E04C0001
  492. [ 4.529918] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  493. [ 4.561339] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  494. [ 5.338420] systemd[1]: Created slice system-serial\x2dgetty.slice.
  495. [ 5.375345] systemd[1]: Listening on udev Kernel Socket.
  496. [ 5.410823] systemd[1]: Listening on fsck to fsckd communication Socket.
  497. [ 5.459020] systemd[1]: Listening on Syslog Socket.
  498. [ 7.731920] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  499. [ 7.887791] systemd-journald[114]: Received request to flush runtime journal from PID 1
  500. [ 8.771331] media: Linux media interface: v0.10
  501. [ 8.779325] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  502. [ 8.782514] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  503. [ 8.782625] [vc_sm_connected_init]: start
  504. [ 8.787547] [vc_sm_connected_init]: installed successfully
  505. [ 8.837880] videodev: Linux video capture interface: v2.00
  506. [ 9.017645] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  507. [ 9.022674] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  508. [ 9.075052] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  509. [ 9.100896] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  510. [ 9.108990] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  511. [ 9.121433] bcm2835_audio soc:audio: card created with 8 channels
  512. [ 9.125298] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  513. [ 9.125318] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  514. [ 9.134724] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  515. [ 9.134746] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  516. [ 9.147613] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  517. [ 9.147641] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  518. [ 9.334578] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.3/input2
  519. [ 9.420081] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  520. [ 9.486773] input: Logitech Unifying Device. Wireless PID:1017 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0006/0003:046D:1017.0007/input/input5
  521. [ 9.491374] hid-generic 0003:046D:1017.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-3f980000.usb-1.3:1
  522. [ 9.585214] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  523. [ 9.628384] lib80211: common routines for IEEE802.11 drivers
  524. [ 9.628417] lib80211_crypt: registered algorithm 'NULL'
  525. [ 9.695947] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
  526. [ 9.779810] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
  527. [ 9.835073] usbcore: registered new interface driver r8188eu
  528. [ 10.474043] input: Logitech Anywhere MX as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0006/0003:046D:1017.0007/input/input9
  529. [ 10.475700] logitech-hidpp-device 0003:046D:1017.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-3f980000.usb-1.3:1
  530. [ 12.473965] 8021q: 802.1Q VLAN Support v1.8
  531. [ 12.766170] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
  532. [ 13.298605] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  533. [ 14.012844] MAC Address = m.m.m.m
  534. [ 14.016486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  535. [ 14.903985] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!