V0Klippylog

Stats 3713.0: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.046 mcu_task_avg=0.000014 mcu_task_stddev=0.000014 bytes_write=6604884 bytes_read=1496747 bytes_retransmit=0 bytes_invalid=0 send_seq=135139 receive_seq=135139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000801 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3273491 bytes_read=1395759 bytes_retransmit=0 bytes_invalid=0 send_seq=122077 receive_seq=122077 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999369 adj=63998357 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14256 bytes_read=46127 bytes_retransmit=0 bytes_invalid=0 send_seq=2337 receive_seq=2337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999873 adj=49998922 sd_pos=19494 heater_bed: target=105 temp=105.2 pwm=0.472 chamber: temp=56.1 Z-Stepper: temp=62.4 MCU_Temp: temp=44.4 Host_CPU: temp=55.0 EBB36: temp=64.2 sysload=0.85 cputime=1029.533 memavail=1545796 print_time=3718.182 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.7 pwm=0.129
Endstop z still triggered after retract
Endstop z still triggered after retract
Endstop z still triggered after retract
Extrude below minimum temp
See the 'min_extrude_temp' config option for details
Extrude below minimum temp
See the 'min_extrude_temp' config option for details
Extrude below minimum temp
See the 'min_extrude_temp' config option for details
virtual_sdcard on_error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/extras/virtual_sdcard.py", line 273, in work_handler
    self.gcode.run_script(line)
  File "/home/biqu/klipper/klippy/gcode.py", line 230, in run_script
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/gcode.py", line 140, in <lambda>
    func = lambda params: origfunc(self._get_extended_params(params))
                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 195, in cmd
    self.template.run_gcode_from_command(kwparams)
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 74, in run_gcode_from_command
    self.gcode.run_script_from_command(self.render(context))
  File "/home/biqu/klipper/klippy/gcode.py", line 227, in run_script_from_command
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/extras/homing_override.py", line 61, in cmd_G28
    self.template.run_gcode_from_command(context)
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 74, in run_gcode_from_command
    self.gcode.run_script_from_command(self.render(context))
  File "/home/biqu/klipper/klippy/gcode.py", line 227, in run_script_from_command
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/extras/homing_override.py", line 23, in cmd_G28
    self.prev_G28(gcmd)
  File "/home/biqu/klipper/klippy/extras/homing.py", line 282, in cmd_G28
    kin.home(homing_state)
  File "/home/biqu/klipper/klippy/kinematics/corexy.py", line 63, in home
    homing_state.home_rails([rail], forcepos, homepos)
  File "/home/biqu/klipper/klippy/extras/homing.py", line 218, in home_rails
    raise self.printer.command_error(
gcode.CommandError: Endstop z still triggered after retract

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/extras/virtual_sdcard.py", line 277, in work_handler
    self.gcode.run_script(self.on_error_gcode.render())
  File "/home/biqu/klipper/klippy/gcode.py", line 230, in run_script
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/gcode.py", line 140, in <lambda>
    func = lambda params: origfunc(self._get_extended_params(params))
                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 195, in cmd
    self.template.run_gcode_from_command(kwparams)
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 74, in run_gcode_from_command
    self.gcode.run_script_from_command(self.render(context))
  File "/home/biqu/klipper/klippy/gcode.py", line 227, in run_script_from_command
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/gcode.py", line 140, in <lambda>
    func = lambda params: origfunc(self._get_extended_params(params))
                          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 195, in cmd
    self.template.run_gcode_from_command(kwparams)
  File "/home/biqu/klipper/klippy/extras/gcode_macro.py", line 74, in run_gcode_from_command
    self.gcode.run_script_from_command(self.render(context))
  File "/home/biqu/klipper/klippy/gcode.py", line 227, in run_script_from_command
    self._process_commands(script.split('\n'), need_ack=False)
  File "/home/biqu/klipper/klippy/gcode.py", line 212, in _process_commands
    handler(gcmd)
  File "/home/biqu/klipper/klippy/extras/gcode_move.py", line 143, in cmd_G1
    self.move_with_transform(self.last_position, self.speed)
  File "/home/biqu/klipper/klippy/extras/bed_mesh.py", line 223, in move
    self.toolhead.move(split_move, speed)
  File "/home/biqu/klipper/klippy/toolhead.py", line 474, in move
    self.extruder.check_move(move)
  File "/home/biqu/klipper/klippy/kinematics/extruder.py", line 207, in check_move
    raise self.printer.command_error(
gcode.CommandError: Extrude below minimum temp
See the 'min_extrude_temp' config option for details
Exiting SD card print (position 19494)
Stats 3714.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.046 mcu_task_avg=0.000014 mcu_task_stddev=0.000014 bytes_write=6605173 bytes_read=1497194 bytes_retransmit=0 bytes_invalid=0 send_seq=135157 receive_seq=135157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000798 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3273917 bytes_read=1396351 bytes_retransmit=0 bytes_invalid=0 send_seq=122118 receive_seq=122118 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999366 adj=63998314 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=14262 bytes_read=46155 bytes_retransmit=0 bytes_invalid=0 send_seq=2338 receive_seq=2338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49998880  heater_bed: target=105 temp=105.2 pwm=0.472 chamber: temp=56.0 Z-Stepper: temp=62.6 MCU_Temp: temp=44.5 Host_CPU: temp=55.0 EBB36: temp=64.5 sysload=0.85 cputime=1029.844 memavail=1545828 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.6 pwm=0.179
Stats 3715.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.046 mcu_task_avg=0.000014 mcu_task_stddev=0.000014 bytes_write=6605185 bytes_read=1497420 bytes_retransmit=0 bytes_invalid=0 send_seq=135159 receive_seq=135159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000796 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3274326 bytes_read=1396869 bytes_retransmit=0 bytes_invalid=0 send_seq=122158 receive_seq=122158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999367 adj=63998315 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=14268 bytes_read=46170 bytes_retransmit=0 bytes_invalid=0 send_seq=2339 receive_seq=2339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999893 adj=49998961  heater_bed: target=105 temp=105.2 pwm=0.472 chamber: temp=55.9 Z-Stepper: temp=62.8 MCU_Temp: temp=44.5 Host_CPU: temp=55.6 EBB36: temp=64.3 sysload=0.85 cputime=1030.048 memavail=1546012 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.5 pwm=0.179
Stats 3716.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.046 mcu_task_avg=0.000014 mcu_task_stddev=0.000014 bytes_write=6605213 bytes_read=1497681 bytes_retransmit=0 bytes_invalid=0 send_seq=135162 receive_seq=135162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000793 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3274726 bytes_read=1397399 bytes_retransmit=0 bytes_invalid=0 send_seq=122199 receive_seq=122199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999363 adj=63998360 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=14274 bytes_read=46185 bytes_retransmit=0 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999886 adj=49999218  heater_bed: target=105 temp=105.2 pwm=0.458 chamber: temp=55.9 Z-Stepper: temp=62.8 MCU_Temp: temp=44.6 Host_CPU: temp=56.1 EBB36: temp=64.6 sysload=0.85 cputime=1030.240 memavail=1545360 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.5 pwm=0.179
Stats 3717.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.046 mcu_task_avg=0.000014 mcu_task_stddev=0.000014 bytes_write=6605225 bytes_read=1497936 bytes_retransmit=0 bytes_invalid=0 send_seq=135164 receive_seq=135164 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000791 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3275107 bytes_read=1397895 bytes_retransmit=0 bytes_invalid=0 send_seq=122236 receive_seq=122236 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999364 adj=63998385 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=14280 bytes_read=46201 bytes_retransmit=0 bytes_invalid=0 send_seq=2341 receive_seq=2341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999879 adj=49999177  heater_bed: target=105 temp=105.2 pwm=0.458 chamber: temp=55.8 Z-Stepper: temp=62.8 MCU_Temp: temp=44.5 Host_CPU: temp=56.1 EBB36: temp=64.3 sysload=0.85 cputime=1030.440 memavail=1546132 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.5 pwm=0.179
Stats 3718.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.032 mcu_task_avg=0.000013 mcu_task_stddev=0.000011 bytes_write=6605237 bytes_read=1498178 bytes_retransmit=0 bytes_invalid=0 send_seq=135166 receive_seq=135166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000791 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3275476 bytes_read=1398350 bytes_retransmit=0 bytes_invalid=0 send_seq=122268 receive_seq=122268 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999360 adj=63998474 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000021 bytes_write=14286 bytes_read=46217 bytes_retransmit=0 bytes_invalid=0 send_seq=2342 receive_seq=2342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999882 adj=49999107  heater_bed: target=105 temp=105.1 pwm=0.458 chamber: temp=55.8 Z-Stepper: temp=62.9 MCU_Temp: temp=44.4 Host_CPU: temp=56.7 EBB36: temp=64.4 sysload=1.10 cputime=1030.626 memavail=1546660 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.7 pwm=0.122
Stats 3719.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.032 mcu_task_avg=0.000013 mcu_task_stddev=0.000011 bytes_write=6605249 bytes_read=1498434 bytes_retransmit=0 bytes_invalid=0 send_seq=135168 receive_seq=135168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000788 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=3275856 bytes_read=1398858 bytes_retransmit=0 bytes_invalid=0 send_seq=122303 receive_seq=122303 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999362 adj=63998446 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14292 bytes_read=46246 bytes_retransmit=0 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999883 adj=49999197  heater_bed: target=105 temp=105.2 pwm=0.458 chamber: temp=55.7 Z-Stepper: temp=62.9 MCU_Temp: temp=44.4 Host_CPU: temp=56.1 EBB36: temp=64.4 sysload=1.10 cputime=1030.819 memavail=1546800 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.9 pwm=0.122
Stats 3720.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.032 mcu_task_avg=0.000013 mcu_task_stddev=0.000011 bytes_write=6605277 bytes_read=1498694 bytes_retransmit=0 bytes_invalid=0 send_seq=135171 receive_seq=135171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000785 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=3276253 bytes_read=1399363 bytes_retransmit=0 bytes_invalid=0 send_seq=122342 receive_seq=122342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=63999364 adj=63998550 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14298 bytes_read=46262 bytes_retransmit=0 bytes_invalid=0 send_seq=2344 receive_seq=2344 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49999260  heater_bed: target=105 temp=105.1 pwm=0.479 chamber: temp=55.7 Z-Stepper: temp=63.0 MCU_Temp: temp=44.2 Host_CPU: temp=56.1 EBB36: temp=64.4 sysload=1.10 cputime=1031.022 memavail=1546256 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.1 pwm=0.070
Stats 3721.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.032 mcu_task_avg=0.000013 mcu_task_stddev=0.000011 bytes_write=6605289 bytes_read=1498920 bytes_retransmit=0 bytes_invalid=0 send_seq=135173 receive_seq=135173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000784 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=3276663 bytes_read=1399871 bytes_retransmit=0 bytes_invalid=0 send_seq=122383 receive_seq=122383 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999363 adj=63998630 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14304 bytes_read=46278 bytes_retransmit=0 bytes_invalid=0 send_seq=2345 receive_seq=2345 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49999469  heater_bed: target=105 temp=105.1 pwm=0.479 chamber: temp=55.7 Z-Stepper: temp=63.0 MCU_Temp: temp=44.3 Host_CPU: temp=55.6 EBB36: temp=64.3 sysload=1.10 cputime=1031.210 memavail=1546556 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.2 pwm=0.070
Stats 3722.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.032 mcu_task_avg=0.000013 mcu_task_stddev=0.000011 bytes_write=6605307 bytes_read=1499192 bytes_retransmit=0 bytes_invalid=0 send_seq=135176 receive_seq=135176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000778 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=3277057 bytes_read=1400402 bytes_retransmit=0 bytes_invalid=0 send_seq=122422 receive_seq=122422 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=63999364 adj=63998633 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14316 bytes_read=46310 bytes_retransmit=0 bytes_invalid=0 send_seq=2347 receive_seq=2347 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999889 adj=49999394  heater_bed: target=105 temp=105.1 pwm=0.479 chamber: temp=55.6 Z-Stepper: temp=63.1 MCU_Temp: temp=44.4 Host_CPU: temp=56.7 EBB36: temp=64.3 sysload=1.10 cputime=1031.410 memavail=1545500 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.3 pwm=0.070
Stats 3723.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605319 bytes_read=1499462 bytes_retransmit=0 bytes_invalid=0 send_seq=135178 receive_seq=135178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000776 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=3277436 bytes_read=1400890 bytes_retransmit=0 bytes_invalid=0 send_seq=122459 receive_seq=122459 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999366 adj=63998733 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14322 bytes_read=46326 bytes_retransmit=0 bytes_invalid=0 send_seq=2348 receive_seq=2348 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999882 adj=49999401  heater_bed: target=105 temp=105.1 pwm=0.479 chamber: temp=55.6 Z-Stepper: temp=63.2 MCU_Temp: temp=44.3 Host_CPU: temp=57.2 EBB36: temp=64.3 sysload=1.10 cputime=1031.601 memavail=1546368 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.3 pwm=0.070
Stats 3724.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605331 bytes_read=1499688 bytes_retransmit=0 bytes_invalid=0 send_seq=135180 receive_seq=135180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000772 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=3277827 bytes_read=1401370 bytes_retransmit=0 bytes_invalid=0 send_seq=122496 receive_seq=122496 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999364 adj=63998749 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14328 bytes_read=46355 bytes_retransmit=0 bytes_invalid=0 send_seq=2349 receive_seq=2349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999877 adj=49999295  heater_bed: target=105 temp=105.1 pwm=0.479 chamber: temp=55.5 Z-Stepper: temp=63.1 MCU_Temp: temp=44.2 Host_CPU: temp=56.1 EBB36: temp=64.2 sysload=1.10 cputime=1031.791 memavail=1545200 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.2 pwm=0.094
Stats 3725.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605359 bytes_read=1499949 bytes_retransmit=0 bytes_invalid=0 send_seq=135183 receive_seq=135183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000770 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=3278230 bytes_read=1401913 bytes_retransmit=0 bytes_invalid=0 send_seq=122535 receive_seq=122535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999360 adj=63998747 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14334 bytes_read=46371 bytes_retransmit=0 bytes_invalid=0 send_seq=2350 receive_seq=2350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49999260  heater_bed: target=105 temp=105.1 pwm=0.502 chamber: temp=55.5 Z-Stepper: temp=63.2 MCU_Temp: temp=44.3 Host_CPU: temp=56.1 EBB36: temp=64.2 sysload=1.10 cputime=1031.992 memavail=1545720 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.1 pwm=0.094
Stats 3726.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605371 bytes_read=1500204 bytes_retransmit=0 bytes_invalid=0 send_seq=135185 receive_seq=135185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000770 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=3278627 bytes_read=1402398 bytes_retransmit=0 bytes_invalid=0 send_seq=122574 receive_seq=122573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=2 upcoming_bytes=0 freq=63999358 adj=63998675 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14340 bytes_read=46387 bytes_retransmit=0 bytes_invalid=0 send_seq=2351 receive_seq=2351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999873 adj=49999274  heater_bed: target=105 temp=105.0 pwm=0.502 chamber: temp=55.4 Z-Stepper: temp=63.1 MCU_Temp: temp=44.3 Host_CPU: temp=56.1 EBB36: temp=64.2 sysload=1.10 cputime=1032.186 memavail=1547208 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.9 pwm=0.155
Stats 3727.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605383 bytes_read=1500430 bytes_retransmit=0 bytes_invalid=0 send_seq=135187 receive_seq=135187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000769 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=3279029 bytes_read=1402906 bytes_retransmit=0 bytes_invalid=0 send_seq=122614 receive_seq=122614 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999358 adj=63998609 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14346 bytes_read=46403 bytes_retransmit=0 bytes_invalid=0 send_seq=2352 receive_seq=2352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999868 adj=49999229  heater_bed: target=105 temp=105.1 pwm=0.502 chamber: temp=55.4 Z-Stepper: temp=63.0 MCU_Temp: temp=44.3 Host_CPU: temp=56.1 EBB36: temp=64.0 sysload=1.10 cputime=1032.381 memavail=1547908 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.8 pwm=0.155
Stats 3728.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605395 bytes_read=1500716 bytes_retransmit=0 bytes_invalid=0 send_seq=135189 receive_seq=135189 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000767 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=3279448 bytes_read=1403436 bytes_retransmit=0 bytes_invalid=0 send_seq=122656 receive_seq=122655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999355 adj=63998621 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=14352 bytes_read=46419 bytes_retransmit=0 bytes_invalid=0 send_seq=2353 receive_seq=2353 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999862 adj=49999166  heater_bed: target=105 temp=105.1 pwm=0.502 chamber: temp=55.3 Z-Stepper: temp=62.5 MCU_Temp: temp=44.4 Host_CPU: temp=56.1 EBB36: temp=64.2 sysload=1.09 cputime=1032.577 memavail=1547624 print_time=3718.642 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.7 pwm=0.155
Stats 3729.1: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=6605449 bytes_read=1500971 bytes_retransmit=0 bytes_invalid=0 send_seq=135194 receive_seq=135194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000768 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000046 bytes_write=3279835 bytes_read=1403929 bytes_retransmit=0 bytes_invalid=0 send_seq=122693 receive_seq=122693 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999354 adj=63998604 host: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=14358 bytes_read=46448 bytes_retransmit=0 bytes_invalid=0 send_seq=2354 receive_seq=2354 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999868 adj=49999125  heater_bed: target=0 temp=105.1 pwm=0.000 chamber: temp=55.3 Z-Stepper: temp=62.2 MCU_Temp: temp=44.4 Host_CPU: temp=56.1 EBB36: temp=64.1 sysload=1.09 cputime=1032.783 memavail=1545488 print_time=3734.135 buffer_time=0.356 print_stall=0 extruder: target=0 temp=159.6 pwm=0.000
webhooks client 281472757352784: Disconnected
Restarting printer
Start printer at Thu May 22 22:06:13 2025 (1747951573.6 3730.9)
===== Config file =====
[virtual_sdcard]
path = /home/biqu/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =
	PRINT_END
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}

	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"

	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}


	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}

	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}

	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}

	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}

	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}

	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}

	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =

	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}

	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}

	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro _CLIENT_LINEAR_MOVE]
description = Linear move with save and restore of the gcode state
gcode =
	{% set x_move = "X" ~ params.X if params.X is defined else "" %}
	{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
	{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
	{% set e_move = "E" ~ params.E if params.E is defined else "" %}
	{% set rate = "F" ~ params.F if params.F is defined else "" %}
	{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
	{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
	SAVE_GCODE_STATE NAME=_client_movement
	{% if x_move or y_move or z_move %}
	G9{ 0 if ABSOLUTE else 1 }
	{% endif %}
	{% if e_move %}
	M8{ 2 if ABSOLUTE_E else 3 }
	{% endif %}
	G1 { x_move } { y_move } { z_move } { e_move } { rate }
	RESTORE_GCODE_STATE NAME=_client_movement

[mcu]
canbus_uuid = 68a5d58c4981

[mcu EBBCan]
canbus_uuid = 40d9cd16e24f

[mcu host]
serial = /tmp/klipper_host_mcu

[printer]
kinematics = corexy
max_velocity = 500
max_accel = 30000
max_z_velocity = 15
max_z_accel = 100

[gcode_macro _OBICO_LAYER_CHANGE]
description = Run a scan across the current print area
variable_first_layer_scan_retract_length = 6
variable_first_layer_scan_retract_speed = 15
variable_first_layer_scan_cooldown_temp = 170
variable_first_layer_scan_resume_speed = 50
variable_first_layer_scan_enabled = True
variable_first_layer_scan_stepover = 10
variable_first_layer_scan_speed = 10
variable_first_layer_scan_zhop = 4
variable_first_layer_scan_zhop_speed = 15
variable_verbose = False
variable_current_layer = -1
variable_first_layer_scanning = False
variable_wait = {'resume': "RESUME", 'absolute_coordinates': True, 'absolute_extrude': True, 'e': 0.0, 'previous_temp': 0}
gcode =

	{% set pause_macro  = "PAUSE"  if printer.configfile.settings['gcode_macro pause']  is not defined
	else printer.configfile.settings['gcode_macro pause'].rename_existing %}
	{% set resume_macro = "RESUME" if printer.configfile.settings['gcode_macro resume'] is not defined
	else printer.configfile.settings['gcode_macro resume'].rename_existing %}

	{% set current_layer_default = printer.print_stats.info.current_layer if printer.print_stats.info.current_layer is not none else -1 %}
	{% set current_layer = params.CURRENT_LAYER|default(current_layer_default)|int %}

	{% set polygon_points = printer.exclude_object.objects|map(attribute='polygon')|sum(start=[]) if printer.exclude_object is defined else [] %}
	{% set min_x = params.MINX|default(polygon_points|map(attribute=0)|min|default(printer.toolhead.axis_minimum.x))|float %}
	{% set min_y = params.MINY|default(polygon_points|map(attribute=1)|min|default(printer.toolhead.axis_minimum.y))|float %}
	{% set max_x = params.MAXX|default(polygon_points|map(attribute=0)|max|default(printer.toolhead.axis_maximum.x))|float %}
	{% set max_y = params.MAXY|default(polygon_points|map(attribute=1)|max|default(printer.toolhead.axis_maximum.y))|float %}

	{% set stepoverCount = ((max_y - min_y) / first_layer_scan_stepover|float)|round(method='ceil')|int %}


	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Layer %d" % (current_layer)}' {% endif %}
	SET_GCODE_VARIABLE MACRO=_OBICO_LAYER_CHANGE VARIABLE=current_layer VALUE={current_layer}

	{% if first_layer_scan_enabled and current_layer == 2 %}

	SET_GCODE_VARIABLE MACRO=_OBICO_LAYER_CHANGE VARIABLE=first_layer_scanning VALUE=True


	{% set wait_dic = {'resume'              : resume_macro,
	'absolute_coordinates': printer.gcode_move.absolute_coordinates,
	'absolute_extrude'    : printer.gcode_move.absolute_extrude,
	'e'                   : printer.gcode_move.gcode_position.e,
	'previous_temp'       : printer.extruder.target} %}
	SET_GCODE_VARIABLE MACRO=_OBICO_LAYER_CHANGE VARIABLE=wait VALUE="{wait_dic}"

	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG="Prepare scanning" {% endif %}
	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Scan Coordinates: Min:[%.3f:%.3f] Max:[%.3f:%.3f]" % (min_x,min_y,max_x,max_y)}' {% endif %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Retract %.1fmm filament" % first_layer_scan_retract_length|abs}' {% endif %}
	M83
	G0 E-{first_layer_scan_retract_length|abs} F{first_layer_scan_retract_speed|float * 60}
	{% endif %}
	G91
	G0 Z{first_layer_scan_zhop|abs} F{first_layer_scan_zhop_speed|float * 60}


	M106 S255
	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Fan on and lowering temperature to %.1f" % first_layer_scan_cooldown_temp}' {% endif %}
	M104 S{first_layer_scan_cooldown_temp}
	M109 S{first_layer_scan_cooldown_temp}

	{pause_macro}


	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG="Start scanning" {% endif %}

	UPDATE_DELAYED_GCODE ID=_WAIT_OBICO_LAYER_CHANGE DURATION=1.0
	G90
	G0 X{min_x} Y{min_y} F{first_layer_scan_resume_speed|float * 60}
	{% for ystep in range(stepoverCount) %}
	G0 Y{min_y + first_layer_scan_stepover|float * ystep} F{first_layer_scan_speed|float * 60}
	G0 X{max_x if ystep % 2 == 0 else min_x}              F{first_layer_scan_speed|float * 60}
	{% endfor %}

	{% if verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG="Finish scanning" {% endif %}

	SET_GCODE_VARIABLE MACRO=_OBICO_LAYER_CHANGE VARIABLE=first_layer_scanning VALUE=False

	{% endif %}

[delayed_gcode _WAIT_OBICO_LAYER_CHANGE]
gcode =
	{% set lc_macro = printer['gcode_macro _OBICO_LAYER_CHANGE'] %}
	{% if lc_macro.first_layer_scanning %}

	{% if lc_macro.verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG="Waiting for first layer scan..." {% endif %}
	UPDATE_DELAYED_GCODE ID=_WAIT_OBICO_LAYER_CHANGE DURATION=1.0
	{% else %}

	M107
	{% if lc_macro.verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG="Fan off and resume print" {% endif %}
	{% if lc_macro.verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Call %s VELOCITY=%.1f" % (lc_macro.wait.resume, lc_macro.first_layer_scan_resume_speed)}' {% endif %}
	{lc_macro.wait.resume} VELOCITY={lc_macro.first_layer_scan_resume_speed}
	G91
	G0 Z-{lc_macro.first_layer_scan_zhop|abs} F{lc_macro.first_layer_scan_zhop_speed|float * 60}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% set first_layer_scan_unretract_length = lc_macro.first_layer_scan_retract_length + 0.5 %}
	{% if lc_macro.verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Extrude %.1fmm filament" % first_layer_scan_unretract_length|abs}' {% endif %}
	M83
	G0 E{first_layer_scan_unretract_length|abs} F{lc_macro.first_layer_scan_retract_speed|float * 60}
	{% endif %}


	M104 S{lc_macro.wait.previous_temp}
	M109 S{lc_macro.wait.previous_temp}
	{% if lc_macro.verbose %} RESPOND PREFIX='OBICO DEBUG:' MSG='{"Heating back up to previous temperature"}' {% endif %}


	{% if lc_macro.wait.absolute_coordinates %} G90 {% endif %}
	{% if lc_macro.wait.absolute_extrude %}
	M82
	G92 E{lc_macro.wait.e}
	{% endif %}
	{% endif %}

[gcode_macro OBICO_LINK_STATUS]
description = Link to Obico server
variable_one_time_passcode = ''
variable_one_time_passlink = ''
variable_is_linked = False
gcode =
	{action_respond_info('Obico one_time_passcode: {}'.format(one_time_passcode))}
	{action_respond_info('Obico one_time_passlink: {}'.format(one_time_passlink))}
	{action_respond_info('Obico is_linked: {}'.format(is_linked))}
	{% if not is_linked and one_time_passcode != '' %}
	M117 Code: {one_time_passcode}
	{% else %}
	M117 Obico linked
	{% endif %}

[gcode_macro _OBICO_RELINK]
description = Re-link to Obico server
gcode =
	{action_respond_info('WARNING: Re-link to Obico server')}
	{action_call_remote_method("obico_remote_event", event_name='relink_obico', message='')}
	{action_respond_info('WARNING: relink_obico requested')}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode =

	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %}
	{% set attach_macro = kamp_settings.attach_macro | string %}
	{% set detach_macro = kamp_settings.detach_macro | string %}
	{% set mesh_margin = kamp_settings.mesh_margin | float %}
	{% set fuzz_amount = kamp_settings.fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}

	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %}

	{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %}
	{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %}
	{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %}
	{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %}

	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}

	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}

	{% set points_x = [points_x , min_points]|max %}
	{% set points_y = [points_y , min_points]|max %}
	{% set points_x = [points_x , probe_count[0]]|min %}
	{% set points_y = [points_y , probe_count[1]]|min %}

	{% if verbose_enable == True %}
	{% if printer.exclude_object.objects != [] %}

	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }

	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }

	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }

	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }

	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}

	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}

	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }

	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}

	{% else %}

	{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
	G4 P5000
	{% endif %}

	{% endif %}

	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}

	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}

	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro LINE_PURGE]
description = A purge macro that adapts to be near your actual printed objects
gcode =

	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
	{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}


	{% if printer.firmware_retraction is defined %}
	{% set RETRACT = G10 | string %}
	{% set UNRETRACT = G11 | string %}
	{% else %}
	{% set RETRACT = 'G1 E-.5 F2100' | string %}
	{% set UNRETRACT = 'G1 E.5 F2100' | string %}
	{% endif %}


	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
	{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
	{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
	{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
	{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}



	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %}
	{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %}
	{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %}
	{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %}

	{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %}
	{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %}

	{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %}
	{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %}


	{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}

	{% if cross_section < 5 %}

	{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}

	{% else %}

	{% if verbose_enable == True %}

	{action_respond_info("Moving filament tip {}mms".format(
	(tip_distance),
	)) }
	{% endif %}

	{% if printer.firmware_retraction is defined %}
	{action_respond_info("KAMP purge is using firmware retraction.")}
	{% else %}
	{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
	{% endif %}

	{% if purge_y_origin > 0 %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_center),
	(purge_y_origin),
	(purge_amount),
	(flow_rate),
	)) }

	{% else %}

	{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm3/s.".format(
	(purge_x_origin),
	(purge_y_center),
	(purge_amount),
	(flow_rate),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Prepurge_State

	{% if purge_y_origin > 0 %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_center} Y{purge_y_origin}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 X{purge_x_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% else %}

	G92 E0
	G0 F{travel_speed}
	G90
	G0 X{purge_x_origin} Y{purge_y_center}
	G0 Z{purge_height}
	M83
	G1 E{tip_distance} F{purge_move_speed}
	G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed}
	{RETRACT}
	G0 Y{purge_y_center + purge_amount + 10} F{travel_speed}
	G92 E0
	M82
	G0 Z{purge_height * 2} F{travel_speed}

	{% endif %}

	RESTORE_GCODE_STATE NAME=Prepurge_State

	{% endif %}

[gcode_macro _SMART_PARK]
description = Parks your printhead near the print area for pre-print hotend heating.
gcode =

	{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
	{% set z_height = kamp_settings.smart_park_height | float %}
	{% set purge_margin = kamp_settings.purge_margin | float %}
	{% set verbose_enable = kamp_settings.verbose_enable | abs %}
	{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %}
	{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %}
	{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
	{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set x_min = all_points | map(attribute=0) | min | default(center_x) %}
	{% set y_min = all_points | map(attribute=1) | min | default(center_y) %}
	{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}

	{% if purge_margin > 0 and x_min != center_x and y_min != center_y %}
	{% set x_min = [ x_min - purge_margin , x_min ] | min %}
	{% set y_min = [ y_min - purge_margin , y_min ] | min %}
	{% set x_min = [ x_min , axis_minimum_x ] | max %}
	{% set y_min = [ y_min , axis_minimum_y ] | max %}
	{% endif %}


	{% if verbose_enable == True %}

	{ action_respond_info("Smart Park location: {},{}.".format(
	(x_min),
	(y_min),
	)) }

	{% endif %}

	SAVE_GCODE_STATE NAME=Presmartpark_State

	G90
	{% if printer.toolhead.position.z < z_height %}
	G0 Z{z_height}
	{% endif %}
	G0 X{x_min} Y{y_min} F{travel_speed}
	G0 Z{z_height}

	RESTORE_GCODE_STATE NAME=Presmartpark_State

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = True
variable_attach_macro = 'TAKE_PROBE'
variable_detach_macro = 'STOW_PROBE'
variable_purge_height = 0.8
variable_tip_distance = 2.0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 20
variable_smart_park_height = 10
gcode =

	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[exclude_object]

[firmware_retraction]

[force_move]
enable_force_move = True

[idle_timeout]
timeout = 600

[stepper_x]
step_pin = PB12
dir_pin = PB11
enable_pin = !PA8
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2240_stepper_x:virtual_endstop
position_max = 120
position_min = 0
position_endstop = 120
homing_speed = 30
homing_retract_dist = 0
homing_positive_dir = true

[tmc2240 stepper_x]
cs_pin = PB2
spi_bus = spi2
run_current = 0.8
stealthchop_threshold = 0
diag0_pin = ^!PC2
driver_sgt = 2
interpolate = true
driver_pwm_autoscale = true
driver_pwm_freq = 2
driver_pwm_ofs = 36
driver_pwm_grad = 14

[stepper_y]
step_pin = PC8
dir_pin = PC9
enable_pin = !PA15
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2240_stepper_y:virtual_endstop
position_max = 120
position_min = 0
position_endstop = 120
homing_speed = 30
homing_retract_dist = 0
homing_positive_dir = true

[tmc2240 stepper_y]
cs_pin = PD9
spi_bus = spi2
run_current = 0.8
stealthchop_threshold = 0
diag0_pin = ^!PD3
driver_sgt = 2
interpolate = true
driver_pwm_autoscale = true
driver_pwm_freq = 2
driver_pwm_ofs = 36
driver_pwm_grad = 14

[stepper_z]
step_pin = PA10
dir_pin = !PA14
enable_pin = !PA13
microsteps = 16
rotation_distance = 8
position_max = 100
endstop_pin = probe:z_virtual_endstop
homing_speed = 20
second_homing_speed = 5.0
homing_retract_dist = 5.0
position_min = -10

[tmc2240 stepper_z]
cs_pin = PD8
spi_bus = spi2
run_current = 0.4
hold_current = 0.05
stealthchop_threshold = 999999

[extruder]
step_pin = EBBCan: PD0
dir_pin = EBBCan: PD1
enable_pin = !EBBCan: PD2
microsteps = 16
rotation_distance = 4.637
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
max_extrude_only_distance = 500
max_extrude_only_velocity = 120
max_extrude_cross_section = 5
heater_pin = EBBCan: PB13
sensor_type = MAX31865
sensor_pin = EBBCan: PA4
spi_bus = spi1
rtd_nominal_r = 1000
rtd_reference_r = 4300
rtd_num_of_wires = 2
min_temp = 0
max_temp = 400
pressure_advance = 0.03
pressure_advance_smooth_time = 0.040
control = pid
pid_kp = 21.303
pid_ki = 1.691
pid_kd = 67.107

[tmc2209 extruder]
uart_pin = EBBCan: PA15
run_current = 0.650
stealthchop_threshold = 0
interpolate = true

[fan]
pin = EBBCan: PA1

[heater_fan hotend_fan]
pin = EBBCan: PA0
heater = extruder
heater_temp = 50.0

[heater_bed]
heater_pin = PA5
sensor_type = Generic 3950
sensor_pin = PA0
smooth_time = 3.0
min_temp = 0
max_temp = 120
control = pid
pid_kp = 57.193
pid_ki = 2.398
pid_kd = 341.013

[neopixel Hotend_rgb]
pin = EBBCan:PD3
chain_count = 3
color_order = GRB

[led_effect hotend_temp_effect]
autostart = true
frame_rate = 24
heater = extruder
leds =
	neopixel:Hotend_rgb (1-2)
layers =
	temperature 100 200 top (0.0, 0.0, 1.0), (1.0, 0.0, 0.0)

[led_effect hotend_fade_rgb]
autostart = true
frame_rate = 24
leds =
	neopixel:Hotend_rgb (0)
layers =
	linearfade 3 0 top (0.1, 0.0, 0.0), (0.0, 0.1, 0.0), (0.0, 0.0, 0.1)

[neopixel Progress_rgb]
pin = PC14
chain_count = 20
color_order = GRB

[led_effect printer_progress]
autostart = true
frame_rate = 24
leds =
	neopixel:Progress_rgb (20-1)
layers =
	progress -1 1 add (0.0, 0.5, 0.0), (0.0, 0.5, 0.0)
	static   0  0 top (0.01, 0.01, 0.01)

[neopixel Chamber_rgb]
pin = PC11
chain_count = 20
color_order = GRB
initial_red = 1.0
initial_green = 1.0
initial_blue = 1.0

[temperature_sensor chamber]
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
pullup_resistor = 4700
min_temp = 0
max_temp = 80

[thermistor Z-Stepper]
temperature1 = 18
resistance1 = 11800
temperature2 = 35
resistance2 = 7000
temperature3 = 96
resistance3 = 1140

[temperature_sensor Z-Stepper]
sensor_type = Z-Stepper
sensor_pin = PA2
min_temp = 0
max_temp = 100

[temperature_sensor MCU_Temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor Host_CPU]
sensor_type = temperature_host
min_temp = 0
max_temp = 100

[temperature_sensor EBB36]
sensor_type = temperature_mcu
sensor_mcu = EBBCan

[output_pin Board_fan]
pin = PA3
value = 1

[fan_generic VOC_Filtration]
pin = PA4
max_power = 1
shutdown_speed = 0
hardware_pwm = false
kick_start_time = 0.4
off_below = 0.4

[fan_generic Aux_Fan]
pin = PD6
max_power = 1
shutdown_speed = 0
hardware_pwm = false
kick_start_time = 0.4
off_below = 0
tachometer_pin = ^PB3
enable_pin = PA7

[gcode_macro M106]
rename_existing = G106
gcode =
	{% if params.P is defined %}
	{% if params.P|int == 2 %}
	{% if params.S is defined %}
	{% if params.S|int == 255 %}
	{% set realspeed = 1 %}
	{% else %}
	{% if params.S|int == 0 %}
	{% set realspeed = 0 %}
	{% else %}
	{% set realspeed = params.S|float/255 %}
	{% endif %}
	{% endif %}
	{% else %}
	{% set realspeed = 1 %}
	{% endif %}

	SET_FAN_SPEED FAN=Aux_Fan SPEED={realspeed}
	{% endif %}
	{% else %}
	{% if params.S is defined %}
	G106 S{params.S}
	{% else %}
	G106 S255
	{% endif %}
	{% endif %}

[gcode_macro M107]
rename_existing = G107
gcode =
	{% if params.P is defined %}
	{% if params.P|int == 2 %}
	SET_FAN_SPEED FAN=Aux_Fan SPEED=0
	{% endif %}
	{% else %}
	SET_FAN_SPEED FAN=Aux_Fan SPEED=0
	G107
	{% endif %}

[filament_switch_sensor switch_sensor]
switch_pin = ^PC3
pause_on_runout = False
runout_gcode =
	PAUSE
	M117 Filament switch runout
insert_gcode =
	M117 Filament switch inserted

[filament_motion_sensor encoder_sensor]
switch_pin = ^PC15
detection_length = 2.88
extruder = extruder
pause_on_runout = False
runout_gcode =
	PAUSE
	M117 Filament encoder runout
insert_gcode =
	M117 Filament encoder inserted

[adxl345]
cs_pin = EBBCan: PB12
spi_software_sclk_pin = EBBCan: PB10
spi_software_mosi_pin = EBBCan: PB11
spi_software_miso_pin = EBBCan: PB2
axes_map = -x, z, -y

[resonance_tester]
accel_chip = adxl345
accel_per_hz = 75
probe_points = 60, 60, 20

[homing_override]
axes = z
gcode =
	BRUSH_IN
	SET_KINEMATIC_POSITION Z=0
	G1 Z5
	G28 X Y
	Query_Probe
	_CONDITIONAL_TAKE_PROBE
	G1 X40 Y60
	G28 Z
	G91
	G1 Z1
	G90
	Query_Probe
	_CONDITIONAL_STOW_PROBE

[probe]
pin = ~EBBCan: PB6
x_offset = 20
y_offset = 0
speed = 20.0
samples = 2
sample_retract_dist = 5.0
lift_speed = 30.0
samples_tolerance = 0.2
samples_tolerance_retries = 15
deactivate_on_each_sample = 0
z_offset = 16.269

[bed_mesh]
speed = 200
horizontal_move_z = 25
mesh_min = 20, 5
mesh_max = 100, 115
probe_count = 7,7
algorithm = bicubic

[servo probeServo]
pin = PC13
minimum_pulse_width = 0.000544

[gcode_macro _PICKUP_POS]
variable_x = 112
variable_y = 53
variable_z = 30
gcode =
	M118 pickup pos X:{printer["gcode_macro _PICKUP_POS"].x} Y:{printer["gcode_macro _PICKUP_POS"].y} Z:{printer["gcode_macro _PICKUP_POS"].z}

[gcode_macro DEPLOY]
gcode =
	SET_SERVO SERVO=probeServo ANGLE=180
	G4 P500
	SET_SERVO SERVO=probeServo WIDTH=0

[gcode_macro RETRACT]
gcode =
	SET_SERVO SERVO=probeServo ANGLE=60
	G4 P500
	SET_SERVO SERVO=probeServo WIDTH=0

[gcode_macro TAKE_PROBE]
gcode =
	G1 Z{printer["gcode_macro _PICKUP_POS"].z} F5000
	G1 X{printer["gcode_macro _PICKUP_POS"].x - 20} Y{printer["gcode_macro _PICKUP_POS"].y} F5000
	DEPLOY
	G1 X{printer["gcode_macro _PICKUP_POS"].x}
	G1 Y{printer["gcode_macro _PICKUP_POS"].y + 50}
	G1 X{printer["gcode_macro _PICKUP_POS"].x - 20}
	RETRACT

[gcode_macro STOW_PROBE]
gcode =
	G1 Z{printer["gcode_macro _PICKUP_POS"].z} F5000
	G1 X{printer["gcode_macro _PICKUP_POS"].x - 20} Y{printer["gcode_macro _PICKUP_POS"].y + 50} F5000
	DEPLOY
	G1 X{printer["gcode_macro _PICKUP_POS"].x}
	G1 Y{printer["gcode_macro _PICKUP_POS"].y} F2000
	G1 X{printer["gcode_macro _PICKUP_POS"].x - 20} F5000
	RETRACT

[gcode_macro _CONDITIONAL_TAKE_PROBE]
gcode =
	{% set P = printer.probe.last_query %}
	{% if P %}
	TAKE_PROBE
	{% endif %}

[gcode_macro _CONDITIONAL_STOW_PROBE]
gcode =
	{% set P = printer.probe.last_query %}
	{% if not P %}
	STOW_PROBE
	{% endif %}

[gcode_macro G29]
gcode =
	G91
	G1 Z1
	G90
	Query_Probe
	_CONDITIONAL_TAKE_PROBE
	BED_MESH_CALIBRATE
	STOW_PROBE

[bed_screws]
screw1 = 60,5
screw1_name = front screw
screw2 = 5,115
screw2_name = back left
screw3 = 115,115
screw3_name = back right

[gcode_macro LOAD_FILAMENT]
description = Load filament: grab → heat → fast fill → slow purge
gcode =
	{% set T = params.TEMP|default(210)|float %}
	M83
	G1 E5  F600
	M104 T0  S{T}
	M109 T0  S{T}
	G1 E40 F1500
	G1 E40 F300
	G1 E1  F120
	M82

[gcode_macro UNLOAD_FILAMENT]
description = Unload filament: bulb → neck → dwell → yank
gcode =
	{% set T = params.TEMP|default(210)|float %}
	M83
	M104 T0  S{T}
	M109 T0  S{T}
	G1 E5   F300
	G1 E-6  F240
	G4 P2500
	G1 E-80 F3000
	M82

[gcode_macro PRINT_START]
gcode =

	M140 S{params.BED|default(60)}
	M104 S160
	M190 S{params.BED|default(60)}
	M109 S160
	G28
	Query_Probe
	_CONDITIONAL_STOW_PROBE
	BED_MESH_PROFILE LOAD="default"

	_Smart_Park
	M109 S{params.EXTRUDER|default(210)}
	CLEAN_NOZZLE

	LINE_PURGE

[gcode_macro PRINT_END]
gcode =

	M400
	G92 E0
	G1 E-2.0 F3600
	G91
	M107 P2


	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}


	{% if printer.toolhead.position.x < (max_x - 20) %}
	{% set x_safe = 20.0 %}
	{% else %}
	{% set x_safe = -20.0 %}
	{% endif %}

	{% if printer.toolhead.position.y < (max_y - 20) %}
	{% set y_safe = 20.0 %}
	{% else %}
	{% set y_safe = -20.0 %}
	{% endif %}

	{% if printer.toolhead.position.z < (max_z - 2) %}
	{% set z_safe = 2.0 %}
	{% else %}
	{% set z_safe = max_z - printer.toolhead.position.z %}
	{% endif %}

	G0 Z{z_safe} F3600
	G0 X{x_safe} Y{y_safe} F20000
	TURN_OFF_HEATERS
	M107
	G90
	G0 X0 F3600

[servo NozzleBrush]
pin = PD2
initial_angle = 5
maximum_servo_angle = 180
minimum_pulse_width = 0.0005
maximum_pulse_width = 0.0024

[gcode_macro BRUSH_OUT]
gcode =
	SET_SERVO SERVO=NozzleBrush ANGLE=95

[gcode_macro BRUSH_IN]
gcode =
	SET_SERVO SERVO=NozzleBrush ANGLE=5
	G4 P500
	SET_SERVO SERVO=NozzleBrush WIDTH=0

[gcode_macro CLEAN_NOZZLE]
gcode =
	SAVE_GCODE_STATE
	G90

	G1 X2 Y70 Z25 F5000
	BRUSH_OUT

	G1 Y80 F3600
	G1 Y118 F5000

	G1 X3.5 F5000
	G1 Y80 F5000

	G1 X4.5 F5000
	G1 Y118 F5000

	G1 X5.5 F3600
	G1 Y80 F3600

	BRUSH_IN

	RESTORE_GCODE_STATE MOVE=1 MOVE_SPEED=5000

[shaketune]
result_folder = ~/printer_data/config/ShakeTune_results
number_of_results_to_keep = 10
keep_raw_data = False
show_macros_in_webui = True
timeout = 600
measurements_chunk_size = 2
max_freq = 200
dpi = 300

[input_shaper]
shaper_type_x = 3hump_ei
shaper_freq_x = 111.4
shaper_type_y = 2hump_ei
shaper_freq_y = 63.6

[bed_mesh fysetc smooth]
version = 1
points =
	0.107500, 0.143750, 0.145000, 0.137500, 0.135000, 0.130000, 0.097500
	0.151250, 0.156250, 0.155000, 0.197500, 0.208750, 0.205000, 0.171250
	0.226250, 0.232500, 0.225000, 0.215000, 0.208750, 0.200000, 0.172500
	0.190000, 0.196250, 0.190000, 0.190000, 0.192500, 0.192500, 0.167500
	0.186250, 0.180000, 0.173750, 0.163750, 0.165000, 0.152500, 0.130000
	0.127500, 0.122500, 0.117500, 0.117500, 0.120000, 0.127500, 0.100000
	0.100000, 0.092500, 0.083750, 0.070000, 0.072500, 0.067500, 0.047500
x_count = 7
y_count = 7
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 25.0
max_x = 94.96000000000001
min_y = 25.0
max_y = 94.95999999999998

[bed_mesh default]
version = 1
points =
	0.031250, 0.025000, 0.007500, -0.031250, -0.068750, -0.108750, -0.170000
	0.043750, 0.061250, 0.040000, 0.012500, 0.045000, 0.021250, -0.023750
	0.022500, 0.176250, 0.142500, 0.105000, 0.097500, 0.062500, 0.023750
	0.130000, 0.162500, 0.127500, 0.113750, 0.106250, 0.090000, 0.058750
	0.077500, 0.136250, 0.108750, 0.106250, 0.092500, 0.087500, 0.058750
	0.062500, 0.096250, 0.070000, 0.075000, 0.070000, 0.093750, 0.087500
	0.018750, 0.100000, 0.107500, 0.107500, 0.112500, 0.130000, 0.107500
x_count = 7
y_count = 7
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 20.0
max_x = 99.98
min_y = 5.0
max_y = 114.97999999999999
=======================
Extruder max_extrude_ratio=2.078758
mcu 'mcu': Starting CAN connect
Created a socket
webhooks client 281473247208720: New connection
webhooks client 281473247208720: Client info {'program': 'Moonraker', 'version': 'v0.9.3-73-g5ee0adc'}
mcu 'mcu': got {'oid': 5, 'next_clock': 3083326720, 'count': 1, 'count_clock': 3779200000, '#name': 'counter_state', '#sent_time': 3734.426918581, '#receive_time': 3734.479519498}
mcu 'mcu': got {'oid': 14, 'next_clock': 3113758720, 'value': 18405, '#name': 'analog_in_state', '#sent_time': 3734.638268706, '#receive_time': 3734.663557956}
mcu 'mcu': got {'oid': 16, 'next_clock': 3115038720, 'value': 28213, '#name': 'analog_in_state', '#sent_time': 3734.638268706, '#receive_time': 3734.68339304}
mcu 'mcu': got {'oid': 17, 'next_clock': 3115678720, 'value': 13085, '#name': 'analog_in_state', '#sent_time': 3734.638268706, '#receive_time': 3734.69345204}
mcu 'mcu': got {'oid': 18, 'next_clock': 3116318720, 'value': 7860, '#name': 'analog_in_state', '#sent_time': 3734.638268706, '#receive_time': 3734.703821081}
Loaded MCU 'mcu' 126 commands (v0.13.0-51-gbfda326c / gcc: (15:12.2.rel1-1) 12.2.1 20221205 binutils: (2.40-2+18+b1) 2.40)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_i2c3_PC0_PC1=PC0,PC1 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2_PB2_PB11_PB10=PB2,PB11,PB10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CANBUS_BRIDGE=1 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=257 RECEIVE_WINDOW=192 RESERVE_PINS_CAN=PD0,PD1 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=8 STEPPER_STEP_BOTH_EDGE=1
mcu 'EBBCan': Starting CAN connect
Created a socket
mcu 'mcu': got {'oid': 14, 'next_clock': 3132958720, 'value': 18422, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3734.963403248}
mcu 'mcu': got {'oid': 16, 'next_clock': 3134238720, 'value': 28216, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3734.983567331}
mcu 'mcu': got {'oid': 17, 'next_clock': 3134878720, 'value': 13094, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3734.993393873}
mcu 'mcu': got {'oid': 18, 'next_clock': 3135518720, 'value': 7860, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.003666665}
mcu 'mcu': got {'oid': 14, 'next_clock': 3152158720, 'value': 18450, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.26341304}
mcu 'mcu': got {'oid': 16, 'next_clock': 3153438720, 'value': 28224, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.283446457}
mcu 'EBBCan': got {'oid': 11, 'next_clock': 3116708137, 'value': 8370, '#name': 'analog_in_state', '#sent_time': 3735.23239779, '#receive_time': 3735.28476679}
mcu 'mcu': got {'oid': 17, 'next_clock': 3154078720, 'value': 13110, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.293412123}
mcu 'mcu': got {'oid': 18, 'next_clock': 3154718720, 'value': 7862, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.303434082}
mcu 'mcu': got {'oid': 5, 'next_clock': 3147358720, 'count': 1, 'count_clock': 3779200000, '#name': 'counter_state', '#sent_time': 3734.878272748, '#receive_time': 3735.48012079}
mcu 'mcu': got {'oid': 14, 'next_clock': 3171358720, 'value': 18469, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.563701665}
mcu 'mcu': got {'oid': 16, 'next_clock': 3172638720, 'value': 28221, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.583557165}
mcu 'EBBCan': got {'oid': 11, 'next_clock': 3135908137, 'value': 8372, '#name': 'analog_in_state', '#sent_time': 3735.552838248, '#receive_time': 3735.584752665}
mcu 'mcu': got {'oid': 17, 'next_clock': 3173278720, 'value': 13091, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.593427748}
mcu 'mcu': got {'oid': 18, 'next_clock': 3173918720, 'value': 7859, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.603431623}
Loaded MCU 'EBBCan' 125 commands (v0.12.0-470-gf511e201 / gcc: (15:12.2.rel1-1) 12.2.1 20221205 binutils: (2.40-2+18+b1) 2.40)
MCU 'EBBCan' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_i2c3_PC0_PC1=PC0,PC1 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2_PB2_PB11_PB10=PB2,PB11,PB10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CANBUS_FREQUENCY=500000 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_CAN=PB0,PB1 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_OPTIMIZED_EDGE=8 STEPPER_STEP_BOTH_EDGE=1
mcu 'host': Starting connect
mcu 'mcu': got {'oid': 14, 'next_clock': 3190558720, 'value': 18480, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.863483957}
mcu 'mcu': got {'oid': 16, 'next_clock': 3191838720, 'value': 28229, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.883484707}
mcu 'EBBCan': got {'oid': 11, 'next_clock': 3155108137, 'value': 8373, '#name': 'analog_in_state', '#sent_time': 3735.6672832900003, '#receive_time': 3735.884666207}
mcu 'mcu': got {'oid': 17, 'next_clock': 3192478720, 'value': 13090, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.89347604}
mcu 'mcu': got {'oid': 18, 'next_clock': 3193118720, 'value': 7863, '#name': 'analog_in_state', '#sent_time': 3734.878272748, '#receive_time': 3735.903477582}
mcu 'mcu': got {'oid': 14, 'next_clock': 3209758720, 'value': 18497, '#name': 'analog_in_state', '#sent_time': 3735.932964207, '#receive_time': 3736.163421124}
mcu 'mcu': got {'oid': 16, 'next_clock': 3211038720, 'value': 28230, '#name': 'analog_in_state', '#sent_time': 3735.932964207, '#receive_time': 3736.183571499}
mcu 'EBBCan': got {'oid': 11, 'next_clock': 3174308137, 'value': 8369, '#name': 'analog_in_state', '#sent_time': 3735.6672832900003, '#receive_time': 3736.184731707}
mcu 'mcu': got {'oid': 17, 'next_clock': 3211678720, 'value': 13100, '#name': 'analog_in_state', '#sent_time': 3735.932964207, '#receive_time': 3736.193557582}
mcu 'mcu': got {'oid': 18, 'next_clock': 3212318720, 'value': 7855, '#name': 'analog_in_state', '#sent_time': 3735.932964207, '#receive_time': 3736.203446832}
Loaded MCU 'host' 127 commands (v0.12.0-490-g5493bdfb / gcc: (Debian 12.2.0-14) 12.2.0 binutils: (GNU Binutils for Debian) 2.40)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256 STEPPER_STEP_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-267.118156 slope=1298.126801
mcu_temperature 'EBBCan' nominal base=-267.982709 slope=1298.126801
Configured MCU 'mcu' (1024 moves)
Configured MCU 'EBBCan' (1024 moves)
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (0.0, 5.0)      | (20.0, 5.0)
  1   | (13.3, 5.0)     | (33.3, 5.0)
  2   | (26.7, 5.0)     | (46.7, 5.0)
  3   | (40.0, 5.0)     | (60.0, 5.0)
  4   | (53.3, 5.0)     | (73.3, 5.0)
  5   | (66.7, 5.0)     | (86.7, 5.0)
  6   | (80.0, 5.0)     | (100.0, 5.0)
  7   | (80.0, 23.3)    | (100.0, 23.3)
  8   | (66.7, 23.3)    | (86.7, 23.3)
  9   | (53.3, 23.3)    | (73.3, 23.3)
  10  | (40.0, 23.3)    | (60.0, 23.3)
  11  | (26.7, 23.3)    | (46.7, 23.3)
  12  | (13.3, 23.3)    | (33.3, 23.3)
  13  | (0.0, 23.3)     | (20.0, 23.3)
  14  | (0.0, 41.7)     | (20.0, 41.7)
  15  | (13.3, 41.7)    | (33.3, 41.7)
  16  | (26.7, 41.7)    | (46.7, 41.7)
  17  | (40.0, 41.7)    | (60.0, 41.7)
  18  | (53.3, 41.7)    | (73.3, 41.7)
  19  | (66.7, 41.7)    | (86.7, 41.7)
  20  | (80.0, 41.7)    | (100.0, 41.7)
  21  | (80.0, 60.0)    | (100.0, 60.0)
  22  | (66.7, 60.0)    | (86.7, 60.0)
  23  | (53.3, 60.0)    | (73.3, 60.0)
  24  | (40.0, 60.0)    | (60.0, 60.0)
  25  | (26.7, 60.0)    | (46.7, 60.0)
  26  | (13.3, 60.0)    | (33.3, 60.0)
  27  | (0.0, 60.0)     | (20.0, 60.0)
  28  | (0.0, 78.3)     | (20.0, 78.3)
  29  | (13.3, 78.3)    | (33.3, 78.3)
  30  | (26.7, 78.3)    | (46.7, 78.3)
  31  | (40.0, 78.3)    | (60.0, 78.3)
  32  | (53.3, 78.3)    | (73.3, 78.3)
  33  | (66.7, 78.3)    | (86.7, 78.3)
  34  | (80.0, 78.3)    | (100.0, 78.3)
  35  | (80.0, 96.6)    | (100.0, 96.6)
  36  | (66.7, 96.6)    | (86.7, 96.6)
  37  | (53.3, 96.6)    | (73.3, 96.6)
  38  | (40.0, 96.6)    | (60.0, 96.6)
  39  | (26.7, 96.6)    | (46.7, 96.6)
  40  | (13.3, 96.6)    | (33.3, 96.6)
  41  | (0.0, 96.6)     | (20.0, 96.6)
  42  | (0.0, 115.0)    | (20.0, 115.0)
  43  | (13.3, 115.0)   | (33.3, 115.0)
  44  | (26.7, 115.0)   | (46.7, 115.0)
  45  | (40.0, 115.0)   | (60.0, 115.0)
  46  | (53.3, 115.0)   | (73.3, 115.0)
  47  | (66.7, 115.0)   | (86.7, 115.0)
  48  | (80.0, 115.0)   | (100.0, 115.0)
Starting heater checks for extruder
Stats 3737.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2845 bytes_read=6607 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=64006069 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1387 bytes_read=5342 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998693 adj=64003324 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=846 bytes_read=4835 bytes_retransmit=0 bytes_invalid=0 send_seq=100 receive_seq=100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998893 adj=49996824  heater_bed: target=0 temp=0.0 pwm=0.000 chamber: temp=0.0 Z-Stepper: temp=0.0 MCU_Temp: temp=0.0 Host_CPU: temp=56.1 EBB36: temp=0.0 sysload=1.08 cputime=1038.336 memavail=1543476 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.1 pwm=0.000
Stats 3738.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.075 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=2959 bytes_read=6898 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000882 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1815 bytes_read=5876 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998945 adj=63991501 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=852 bytes_read=4851 bytes_retransmit=0 bytes_invalid=0 send_seq=101 receive_seq=101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998047 adj=49998143  heater_bed: target=0 temp=103.5 pwm=0.000 chamber: temp=54.7 Z-Stepper: temp=61.2 MCU_Temp: temp=44.3 Host_CPU: temp=56.1 EBB36: temp=63.8 sysload=1.56 cputime=1038.534 memavail=1542980 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.1 pwm=0.000
Stats 3739.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.075 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=2971 bytes_read=7183 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000622 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2196 bytes_read=6363 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999759 adj=63996121 host: mcu_awake=0.007 mcu_task_avg=0.000044 mcu_task_stddev=0.000028 bytes_write=858 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=102 receive_seq=102 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49998794  heater_bed: target=0 temp=103.1 pwm=0.000 chamber: temp=54.6 Z-Stepper: temp=60.6 MCU_Temp: temp=44.2 Host_CPU: temp=56.1 EBB36: temp=63.8 sysload=1.56 cputime=1038.719 memavail=1543240 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.7 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281473247208720
webhooks: registering remote method 'reboot_machine' for connection id: 281473247208720
webhooks: registering remote method 'pause_job_queue' for connection id: 281473247208720
webhooks: registering remote method 'start_job_queue' for connection id: 281473247208720
webhooks: registering remote method 'obico_remote_event' for connection id: 281473247208720
Stats 3740.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.075 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=2983 bytes_read=7409 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000289 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000031 bytes_write=2588 bytes_read=6878 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000014 adj=63998793 host: mcu_awake=0.007 mcu_task_avg=0.000044 mcu_task_stddev=0.000028 bytes_write=870 bytes_read=4914 bytes_retransmit=0 bytes_invalid=0 send_seq=104 receive_seq=104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998947 adj=50002242  heater_bed: target=0 temp=102.8 pwm=0.000 chamber: temp=54.6 Z-Stepper: temp=60.5 MCU_Temp: temp=44.0 Host_CPU: temp=56.7 EBB36: temp=63.4 sysload=1.56 cputime=1038.980 memavail=1543832 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.2 pwm=0.000
Stats 3741.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.075 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=2995 bytes_read=7635 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000275 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000031 bytes_write=2984 bytes_read=7399 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999889 adj=63999989 host: mcu_awake=0.007 mcu_task_avg=0.000044 mcu_task_stddev=0.000028 bytes_write=876 bytes_read=4930 bytes_retransmit=0 bytes_invalid=0 send_seq=105 receive_seq=105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999125 adj=50000124  heater_bed: target=0 temp=102.6 pwm=0.000 chamber: temp=54.6 Z-Stepper: temp=60.7 MCU_Temp: temp=44.4 Host_CPU: temp=57.2 EBB36: temp=63.6 sysload=1.56 cputime=1039.245 memavail=1545660 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.5 pwm=0.000
Stats 3742.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.075 mcu_task_avg=0.000015 mcu_task_stddev=0.000025 bytes_write=3007 bytes_read=7920 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000158 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000031 bytes_write=3397 bytes_read=7919 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999769 adj=63999652 host: mcu_awake=0.007 mcu_task_avg=0.000044 mcu_task_stddev=0.000028 bytes_write=882 bytes_read=4946 bytes_retransmit=0 bytes_invalid=0 send_seq=106 receive_seq=106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999814 adj=50000210  heater_bed: target=0 temp=102.2 pwm=0.000 chamber: temp=54.5 Z-Stepper: temp=60.6 MCU_Temp: temp=44.4 Host_CPU: temp=56.7 EBB36: temp=63.6 sysload=1.56 cputime=1039.446 memavail=1543804 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.9 pwm=0.000
Stats 3743.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3019 bytes_read=8161 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000228 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000031 bytes_write=3770 bytes_read=8399 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999503 adj=63999449 host: mcu_awake=0.007 mcu_task_avg=0.000044 mcu_task_stddev=0.000028 bytes_write=888 bytes_read=4962 bytes_retransmit=0 bytes_invalid=0 send_seq=107 receive_seq=107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999588 adj=50001727  heater_bed: target=0 temp=101.9 pwm=0.000 chamber: temp=54.4 Z-Stepper: temp=60.7 MCU_Temp: temp=44.3 Host_CPU: temp=56.1 EBB36: temp=63.6 sysload=1.51 cputime=1039.637 memavail=1546036 print_time=3741.690 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.3 pwm=0.000
Starting SD card print (position 0)
Stats 3744.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3047 bytes_read=8392 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000170 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.023 mcu_task_avg=0.000019 mcu_task_stddev=0.000031 bytes_write=4173 bytes_read=8905 bytes_retransmit=0 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999458 adj=63998493 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=894 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=108 receive_seq=108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999581 adj=50000424 sd_pos=19494 heater_bed: target=105 temp=101.6 pwm=1.000 chamber: temp=54.4 Z-Stepper: temp=60.9 MCU_Temp: temp=44.3 Host_CPU: temp=56.7 EBB36: temp=63.5 sysload=1.51 cputime=1039.923 memavail=1544232 print_time=3748.534 buffer_time=0.000 print_stall=0 extruder: target=160 temp=153.4 pwm=0.781
Stats 3745.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3059 bytes_read=8677 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000251 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4587 bytes_read=9437 bytes_retransmit=0 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999418 adj=63998742 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=900 bytes_read=5007 bytes_retransmit=0 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999486 adj=50000300 sd_pos=19494 heater_bed: target=105 temp=101.3 pwm=1.000 chamber: temp=54.4 Z-Stepper: temp=61.2 MCU_Temp: temp=44.1 Host_CPU: temp=56.7 EBB36: temp=63.6 sysload=1.51 cputime=1040.126 memavail=1544228 print_time=3749.535 buffer_time=0.000 print_stall=0 extruder: target=160 temp=153.0 pwm=0.781
Stats 3746.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3071 bytes_read=8903 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000363 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=4963 bytes_read=9907 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999461 adj=63998457 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=906 bytes_read=5023 bytes_retransmit=0 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999501 adj=49999559 sd_pos=19494 heater_bed: target=105 temp=101.1 pwm=1.000 chamber: temp=54.4 Z-Stepper: temp=61.1 MCU_Temp: temp=44.3 Host_CPU: temp=56.7 EBB36: temp=63.3 sysload=1.51 cputime=1040.312 memavail=1544924 print_time=3750.538 buffer_time=0.000 print_stall=0 extruder: target=160 temp=153.1 pwm=0.722
Stats 3747.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3083 bytes_read=9129 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000434 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=5366 bytes_read=10391 bytes_retransmit=0 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999393 adj=63998364 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=912 bytes_read=5039 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999531 adj=49999211 sd_pos=19494 heater_bed: target=105 temp=101.0 pwm=1.000 chamber: temp=54.4 Z-Stepper: temp=61.0 MCU_Temp: temp=44.2 Host_CPU: temp=55.6 EBB36: temp=63.6 sysload=1.51 cputime=1040.501 memavail=1544436 print_time=3751.536 buffer_time=0.000 print_stall=0 extruder: target=160 temp=154.2 pwm=0.464
Stats 3748.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3111 bytes_read=9434 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000602 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=5778 bytes_read=10875 bytes_retransmit=0 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999351 adj=63998005 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=918 bytes_read=5055 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999592 adj=49999104 sd_pos=19494 heater_bed: target=105 temp=101.1 pwm=1.000 chamber: temp=54.4 Z-Stepper: temp=60.8 MCU_Temp: temp=44.0 Host_CPU: temp=55.6 EBB36: temp=63.5 sysload=1.39 cputime=1040.693 memavail=1545464 print_time=3752.537 buffer_time=0.000 print_stall=0 extruder: target=160 temp=155.5 pwm=0.247
Stats 3749.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3139 bytes_read=9665 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000605 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000026 mcu_task_stddev=0.000045 bytes_write=6213 bytes_read=11383 bytes_retransmit=0 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999346 adj=63997369 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=924 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999691 adj=49998810 sd_pos=19494 heater_bed: target=105 temp=101.2 pwm=0.946 chamber: temp=54.3 Z-Stepper: temp=60.3 MCU_Temp: temp=44.2 Host_CPU: temp=55.6 EBB36: temp=63.6 sysload=1.39 cputime=1040.890 memavail=1545212 print_time=3753.538 buffer_time=0.000 print_stall=0 extruder: target=160 temp=157.1 pwm=0.027
Stats 3750.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3167 bytes_read=9896 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000589 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=6574 bytes_read=11884 bytes_retransmit=0 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999388 adj=63997899 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=930 bytes_read=5100 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999759 adj=49999283 sd_pos=19494 heater_bed: target=105 temp=101.4 pwm=0.856 chamber: temp=54.3 Z-Stepper: temp=60.0 MCU_Temp: temp=44.4 Host_CPU: temp=55.6 EBB36: temp=63.5 sysload=1.39 cputime=1041.083 memavail=1544972 print_time=3754.539 buffer_time=0.000 print_stall=0 extruder: target=160 temp=159.3 pwm=0.027
Stats 3751.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3211 bytes_read=10191 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000571 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=6970 bytes_read=12386 bytes_retransmit=0 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999375 adj=63998370 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=936 bytes_read=5116 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999752 adj=49999615 sd_pos=19494 heater_bed: target=105 temp=101.8 pwm=0.706 chamber: temp=54.3 Z-Stepper: temp=59.8 MCU_Temp: temp=44.2 Host_CPU: temp=55.0 EBB36: temp=63.6 sysload=1.39 cputime=1041.283 memavail=1544972 print_time=3755.540 buffer_time=0.000 print_stall=0 extruder: target=160 temp=160.6 pwm=0.027
Stats 3752.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.024 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3255 bytes_read=10423 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000574 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7348 bytes_read=12866 bytes_retransmit=0 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999400 adj=63998503 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=942 bytes_read=5132 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999761 adj=49999573 sd_pos=19494 heater_bed: target=105 temp=102.0 pwm=0.575 chamber: temp=54.2 Z-Stepper: temp=59.8 MCU_Temp: temp=44.1 Host_CPU: temp=55.0 EBB36: temp=63.4 sysload=1.39 cputime=1041.478 memavail=1544980 print_time=3756.541 buffer_time=0.000 print_stall=0 extruder: target=160 temp=161.7 pwm=0.027
Stats 3753.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3283 bytes_read=10656 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000568 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=7736 bytes_read=13345 bytes_retransmit=0 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999453 adj=63998686 host: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=948 bytes_read=5148 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999720 adj=49999538 sd_pos=19494 heater_bed: target=105 temp=102.3 pwm=0.518 chamber: temp=54.3 Z-Stepper: temp=59.7 MCU_Temp: temp=44.3 Host_CPU: temp=55.6 EBB36: temp=63.4 sysload=1.28 cputime=1041.664 memavail=1544984 print_time=3757.542 buffer_time=0.000 print_stall=0 extruder: target=160 temp=162.7 pwm=0.000
Stats 3754.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3311 bytes_read=10928 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000569 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=8161 bytes_read=13854 bytes_retransmit=0 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999449 adj=63999021 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000025 bytes_write=954 bytes_read=5177 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999753 adj=49999301 sd_pos=19494 heater_bed: target=105 temp=102.6 pwm=0.460 chamber: temp=54.2 Z-Stepper: temp=59.4 MCU_Temp: temp=44.3 Host_CPU: temp=55.0 EBB36: temp=63.4 sysload=1.28 cputime=1041.861 memavail=1544984 print_time=3758.543 buffer_time=0.000 print_stall=0 extruder: target=160 temp=163.2 pwm=0.000
Stats 3755.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3339 bytes_read=11145 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000576 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=8542 bytes_read=14327 bytes_retransmit=0 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999451 adj=63998964 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000025 bytes_write=960 bytes_read=5193 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999732 adj=49999462 sd_pos=19494 heater_bed: target=105 temp=102.8 pwm=0.407 chamber: temp=54.2 Z-Stepper: temp=59.4 MCU_Temp: temp=44.1 Host_CPU: temp=55.0 EBB36: temp=63.4 sysload=1.28 cputime=1042.044 memavail=1544992 print_time=3759.543 buffer_time=0.000 print_stall=0 extruder: target=160 temp=163.4 pwm=0.000
Stats 3756.3: gcodein=0  canstat_mcu: bus_state=active rx_error=0 tx_error=0 tx_retries=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=3351 bytes_read=11357 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000579 canstat_EBBCan: bus_state=active rx_error=0 tx_error=0 tx_retries=0 EBBCan: mcu_awake=0.022 mcu_task_avg=0.000027 mcu_task_stddev=0.000046 bytes_write=8922 bytes_read=14818 bytes_retransmit=0 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999437 adj=63998909 host: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000025 bytes_write=966 bytes_read=5209 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999738 adj=49999281 sd_pos=19494 heater_bed: target=105 temp=102.9 pwm=0.407 chamber: temp=54.1 Z-Stepper: temp=59.6 MCU_Temp: temp=44.2 Host_CPU: temp=55.0 EBB36: temp=63.4 sysload=1.28 cputime=1042.246 memavail=1544996 print_time=3760.544 buffer_time=0.000 print_stall=0 extruder: target=160 temp=163.5 pwm=0.000