Ooma Telo rev 5 default U-Boot environment

bootdelay=5
baudrate=115200
ipaddr=10.55.0.100
hostname=comcerto100
netdev=eth0
nfsargs=setenv bootargs init=${init_process} root=/dev/nfs ${rootfsmode} nfsroot=${serverip}:${nfsrootpath}
sectorSize=128k
init_process=/sbin/init
boot_version=59116
ooma_mode=default
nvram=setenv nvram_update;saveenv
addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
addeth=setenv bootargs ${bootargs} hwaddress=${netdev},${ethaddr}
addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}
addmtd=setenv bootargs ${bootargs} ${mtdparts}
boot_nfs=nfs 80600000 ${nfsbootpath}/${kernelfile};run nfsargs addeth addip addtty addmtd;bootm 80600000
bootdhcp=dhcp; setenv serverip ${nfsip}; run boot_nfs
rootfstype=ubifs
rootfsmode=ro
ubisetroot=setenv rootfstype ubifs; saveenv
ubirootpath=setenv rootpath ubi0:${ubiroot} ubi.mtd=1,${ooma_nand_psize}; if test "${rootfstype}" != "ubifs"; then run ubisetroot; fi
set_bootargs=setenv bootargs root=${rootpath} rootfstype=${rootfstype} ${rootfsmode}
flashargs=run set_bootargs; ${nvram_update};run addtty addmtd
bootcmd=run ooma_bootcmd
testfile=/mfg-darwin-boot
ooma_bootcmd=run boot_mfg; run bootnand
boot_mfg=setenv bootfile unset; setenv serverip 10.55.0.250; dhcp; if test "${bootfile}" = "${testfile}"; then run boot_mfg_nfs; fi
boot_mfg_nfs=setenv nfsip 10.55.0.250; setenv serverip 10.55.0.250; setenv rootfsmode rw; setenv rootfstype jffs2; setenv ooma_mode 1; setenv firewall off; setenv nfsrootpath /mfg-boot/root; setenv nfsbootpath /mfg-boot/root/boot; run boot_nfs
switch_bootfs=if test "${ubiroot}" = "rootfsa"; then setenv ubiroot rootfsb; else setenv ubiroot rootfsa; fi
bootnand=run set_ubiroot; run choose_ubiroot; run ubirootpath; run flashargs; run bootnandLinux;
choose_ubiroot=setenv nandfail 0; run ubimount; setenv umountstat $?; run ubiload; setenv uloadstat $?; if test "${umountstat}" = "1"; then setenv nandfail 1; saveenv; fi; if test "${uloadstat}" = "1"; then setenv nandfail 1; saveenv; fi; if test "${nandfail}" = "1"; then run switch_bootfs; run ubimount; run ubiload; fi
bootnandLinux=bootm 80600000; setenv kernelboot $?; if test "${kernelboot}" = "1"; then reset; fi
set_ubiroot=run ubipart; if ubi test bootfsa; then setenv ubiroot rootfsa; fi; if ubi test bootfsb; then setenv ubiroot rootfsb; fi
ubipart=if test "${ooma_nand_mfg}" = "2c"; then run ubipart2; else run ubipart1; fi
ubipart1=ubi part nand0,1 ; setenv ooma_nand_psize ${nand_psize}
ubipart2=ubi part nand0,1 4096; setenv ooma_nand_psize 4096
ubimount=ubifsmount ${ubiroot}
ubiload=ubifsload 80600000 /boot/uImage
netretry=no
autoload=n
kernelfile=uImage
mtdids=nand0=comcertonand
mtdparts=mtdparts=comcertonand:2M(OptNand),-(ubi)
tftpserverip=10.55.0.250
envfile=env.scr
clearenv=sf probe 0; sf erase 70000 4000
updateenv=tftp 81000000 ${envfile}; source 81000000
updateconfig=tftp 81000000 config.bin;sf probe 0;sf erase 8000 8000;sf write 81000000 8000 8000
updateeeprom=tftp 81000000 eeprom.bin;sf probe 0;sf erase 0 8000;sf write 81000000 0 8000
updateboot=tftp 81000000 u-boot.spi.bin;sf probe 0;sf erase 10000 60000;sf write 81000000 10000 60000
ethaddr=00:18:61:14:5C:AF
ethact=comcerto_gemac0
bootfile=unset
serverip=10.55.0.250
partition=nand0,1
mtddevnum=1
mtddevname=ubi
nand_psize=512
ooma_nand_psize=512
ubiroot=rootfsa
nandfail=0
umountstat=0
filesize=22A4B4
uloadstat=0
rootpath=ubi0:rootfsa ubi.mtd=1,512
bootargs=root=ubi0:rootfsa ubi.mtd=1,512 rootfstype=ubifs ro
stdin=serial
stdout=serial
stderr=serial
eeprom_version=59116
ooma_nand_mfg=ec


Environment size: 3551/16380 bytes
Telo >