API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 20th, 2017
614
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.86 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.10-rc4-g73d683b (Aug 26 2016 - 11:34:33)
  2. Boot Device: SD1
  3. spl: error reading image u-boot.img, err - -1
  4. Load image from RAW...
  5.  
  6.  
  7. U-Boot 2013.10-rc4-g73d683b (Aug 26 2016 - 11:34:33)
  8.  
  9. CPU: Freescale i.MX6Q rev1.2 at 792 MHz
  10. Reset cause: POR
  11. Board: MX6-CuBox-i
  12. DRAM: 3.8 GiB
  13. MMC: FSL_SDHC: 0
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Net: FEC [PRIME]
  20. Hit any key to stop autoboot: 0
  21. mmc0 is current device
  22. ** Unable to read file /boot.scr **
  23. 210 bytes read in 9 ms (22.5 KiB/s)
  24. Importing environment from mmc0 ...
  25. 6065360 bytes read in 554 ms (10.4 MiB/s)
  26. Booting from mmc ...
  27. 3558993 bytes read in 334 ms (10.2 MiB/s)
  28. Loaded uInitrd
  29. 34727 bytes read in 19 ms (1.7 MiB/s)
  30. Loaded imx6q-cubox-i.dtb
  31. Booting zImage
  32. Kernel image @ 0x10800000 [ 0x000000 - 0x5c8cd0 ]
  33. ## Loading init Ramdisk from Legacy Image at 18100000 ...
  34. Image Name: uInitrd
  35. Image Type: ARM Linux RAMDisk Image (uncompressed)
  36. Data Size: 3558929 Bytes = 3.4 MiB
  37. Load Address: 00000000
  38. Entry Point: 00000000
  39. Verifying Checksum ... OK
  40. ## Flattened Device Tree blob at 18000000
  41. Booting using the fdt blob at 0x18000000
  42. Using Device Tree in place at 18000000, end 1800b7a6
  43.  
  44. Starting kernel ...
  45.  
  46. [ 0.000000] Booting Linux on physical CPU 0x0
  47. [ 0.000000] Initializing cgroup subsys cpuset
  48. [ 0.000000] Initializing cgroup subsys cpu
  49. [ 0.000000] Initializing cgroup subsys cpuacct
  50. [ 0.000000] Linux version 3.14.79 (cubox@VolumioOS) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #2 SMP Sat Jan 28 19:39:16 CET 2017
  51. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  52. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  53. [ 0.000000] Truncating memory at 0x10000000 to fit in 32-bit physical address space
  54. [ 0.000000] Machine model: SolidRun Cubox-i Dual/Quad
  55. [ 0.000000] cma: CMA: reserved 256 MiB at 2e000000
  56. [ 0.000000] Memory policy: Data cache writealloc
  57. [ 0.000000] PERCPU: Embedded 8 pages/cpu @ef73a000 s8832 r8192 d15744 u32768
  58. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 981519
  59. [ 0.000000] Kernel command line: console=ttymxc0,115200n8 console=tty imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh rootwait rw
  60. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  61. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  62. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  63. [ 0.000000] allocated 7864312 bytes of page_cgroup
  64. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  65. [ 0.000000] Memory: 3615064K/3932156K available (7692K kernel code, 354K rwdata, 2528K rodata, 340K init, 525K bss, 317092K reserved, 3153916K highmem)
  66. [ 0.000000] Virtual kernel memory layout:
  67. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  68. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  69. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  70. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  71. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  72. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  73. [ 0.000000] .text : 0xc0008000 - 0xc0a034a0 (10222 kB)
  74. [ 0.000000] .init : 0xc0a04000 - 0xc0a59280 ( 341 kB)
  75. [ 0.000000] .data : 0xc0a5a000 - 0xc0ab2ac0 ( 355 kB)
  76. [ 0.000000] .bss : 0xc0ab2ac8 - 0xc0b35f18 ( 526 kB)
  77. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  78. [ 0.000000] Hierarchical RCU implementation.
  79. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  80. [ 0.000000] L2C-310 erratum 769419 enabled
  81. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  82. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  83. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x72470000
  84. [ 0.000000] Switching to timer-based delay loop
  85. [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
  86. [ 0.000530] Console: colour dummy device 80x30
  87. [ 0.000889] console [tty0] enabled
  88. [ 0.000920] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000)
  89. [ 0.000947] pid_max: default: 32768 minimum: 301
  90. [ 0.001071] Security Framework initialized
  91. [ 0.001090] SELinux: Initializing.
  92. [ 0.001185] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  93. [ 0.001207] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  94. [ 0.006494] Initializing cgroup subsys memory
  95. [ 0.006530] Initializing cgroup subsys devices
  96. [ 0.006546] Initializing cgroup subsys freezer
  97. [ 0.006561] Initializing cgroup subsys net_cls
  98. [ 0.006574] Initializing cgroup subsys blkio
  99. [ 0.006588] Initializing cgroup subsys bfqio
  100. [ 0.006659] CPU: Testing write buffer coherency: ok
  101. [ 0.006953] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  102. [ 0.007015] Setting up static identity map for 0x10757558 - 0x107575b0
  103. [ 0.008794] CPU1: Booted secondary processor
  104. [ 0.008814] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  105. [ 0.009678] CPU2: Booted secondary processor
  106. [ 0.009697] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  107. [ 0.010566] CPU3: Booted secondary processor
  108. [ 0.010586] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  109. [ 0.010698] Brought up 4 CPUs
  110. [ 0.010771] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  111. [ 0.010785] CPU: All CPU(s) started in SVC mode.
  112. [ 0.011291] devtmpfs: initialized
  113. [ 0.014776] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  114. [ 0.027772] atomic64 test passed
  115. [ 0.027811] pinctrl core: initialized pinctrl subsystem
  116. [ 0.028074] regulator-dummy: no parameters
  117. [ 0.028433] NET: Registered protocol family 16
  118. [ 0.036017] DMA: preallocated 256 KiB pool for atomic coherent allocations
  119. [ 0.036510] cpuidle: using governor ladder
  120. [ 0.036526] cpuidle: using governor menu
  121. [ 0.036684] CPU identified as i.MX6Q, silicon rev 1.2
  122. [ 0.036788] Use WDOG1 as reset source
  123. [ 0.044701] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  124. [ 0.044974] vdd1p1: 800 <--> 1375 mV at 1100 mV
  125. [ 0.045267] vdd3p0: 2800 <--> 3150 mV at 3000 mV
  126. [ 0.045546] vdd2p5: 2000 <--> 2750 mV at 2400 mV
  127. [ 0.045812] vddarm: 725 <--> 1450 mV at 1150 mV
  128. [ 0.046292] vddpu: 725 <--> 1450 mV at 1150 mV
  129. [ 0.046609] vddsoc: 725 <--> 1450 mV at 1200 mV
  130. [ 0.048289] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
  131. [ 0.050711] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
  132. [ 0.054347] No ATAGs?
  133. [ 0.054380] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  134. [ 0.054404] hw-breakpoint: maximum watchpoint size is 4 bytes.
  135. [ 0.054766] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  136. [ 0.067881] bio: create slab <bio-0> at 0
  137. [ 0.069944] mxs-dma 110000.dma-apbh: initialized
  138. [ 0.070631] brcm_osc_reg: 3300 mV
  139. [ 0.070846] brcm_reg: 3300 mV
  140. [ 0.071035] 3P3V: 3300 mV
  141. [ 0.071295] usb_h1_vbus: 5000 mV
  142. [ 0.071523] usb_otg_vbus: 5000 mV
  143. [ 0.071804] vgaarb: loaded
  144. [ 0.072506] SCSI subsystem initialized
  145. [ 0.072947] usbcore: registered new interface driver usbfs
  146. [ 0.073018] usbcore: registered new interface driver hub
  147. [ 0.073125] usbcore: registered new device driver usb
  148. [ 0.073286] usbphy_nop1.12 supply vcc not found, using dummy regulator
  149. [ 0.073363] usbphy_nop2.13 supply vcc not found, using dummy regulator
  150. [ 0.074547] i2c i2c-1: IMX I2C adapter registered
  151. [ 0.075082] i2c i2c-2: IMX I2C adapter registered
  152. [ 0.075242] pps_core: LinuxPPS API ver. 1 registered
  153. [ 0.075276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  154. [ 0.075322] PTP clock support registered
  155. [ 0.077320] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  156. [ 0.080317] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  157. [ 0.081107] MIPI CSI2 driver module loaded
  158. [ 0.081207] Advanced Linux Sound Architecture Driver Initialized.
  159. [ 0.082018] NetLabel: Initializing
  160. [ 0.082035] NetLabel: domain hash size = 128
  161. [ 0.082047] NetLabel: protocols = UNLABELED CIPSOv4
  162. [ 0.082098] NetLabel: unlabeled traffic allowed by default
  163. [ 0.082335] Switched to clocksource mxc_timer1
  164. [ 0.092695] NET: Registered protocol family 2
  165. [ 0.093617] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  166. [ 0.093712] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  167. [ 0.093844] TCP: Hash tables configured (established 8192 bind 8192)
  168. [ 0.093926] TCP: reno registered
  169. [ 0.093948] UDP hash table entries: 512 (order: 2, 16384 bytes)
  170. [ 0.093997] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  171. [ 0.094290] NET: Registered protocol family 1
  172. [ 0.094656] RPC: Registered named UNIX socket transport module.
  173. [ 0.094675] RPC: Registered udp transport module.
  174. [ 0.094688] RPC: Registered tcp transport module.
  175. [ 0.094700] RPC: Registered tcp NFSv4.1 backchannel transport module.
  176. [ 0.094936] Trying to unpack rootfs image as initramfs...
  177. [ 0.318108] Freeing initrd memory: 3468K (c8101000 - c8464000)
  178. [ 0.318587] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  179. [ 0.320242] imx6_busfreq busfreq.15: DDR medium rate not supported.
  180. [ 0.320696] Bus freq driver module loaded
  181. [ 0.321650] futex hash table entries: 1024 (order: 4, 65536 bytes)
  182. [ 0.321911] audit: initializing netlink subsys (disabled)
  183. [ 0.321979] audit: type=2000 audit(0.321:1): initialized
  184. [ 0.486452] bounce pool size: 64 pages
  185. [ 0.492650] VFS: Disk quotas dquot_6.5.2
  186. [ 0.492901] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  187. [ 0.494982] NFS: Registering the id_resolver key type
  188. [ 0.495027] Key type id_resolver registered
  189. [ 0.495043] Key type id_legacy registered
  190. [ 0.495065] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  191. [ 0.495293] fuse init (API version 7.22)
  192. [ 0.495967] msgmni has been set to 1419
  193. [ 0.496277] Key type big_key registered
  194. [ 0.496966] cryptodev: driver 1.7 loaded.
  195. [ 0.507423] alg: No test for stdrng (krng)
  196. [ 0.528628] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  197. [ 0.528828] NET: Registered protocol family 38
  198. [ 0.528909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  199. [ 0.529045] io scheduler noop registered
  200. [ 0.529061] io scheduler deadline registered
  201. [ 0.529244] io scheduler cfq registered
  202. [ 0.529431] io scheduler bfq registered (default)
  203. [ 0.529446] BFQ I/O-scheduler: v7r8
  204. [ 0.532517] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  205. [ 0.532560] fbcvt: 1920x1080@60: CVT Name - 2.073M9
  206. [ 0.532660] mxc_sdc_fb fb.25: registered mxc display driver hdmi IPU1_DISP0
  207. [ 0.532679] mxc_sdc_fb fb.25: registered mxc display driver hdmi
  208. [ 0.560803] imx-ipuv3 2400000.ipu: try ipu internal clk
  209. [ 0.567364] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
  210. [ 0.567410] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  211. [ 0.600856] imx-ipuv3 2400000.ipu: try ipu internal clk
  212. [ 0.606379] imx-ipuv3 2400000.ipu: disp=0, pixel_clk=148500000 148500000 parent=148500000 div=1
  213. [ 0.642641] Console: switching to colour frame buffer device 240x67
  214. [ 0.696424] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  215. [ 0.697139] imx-sdma 20ec000.sdma: no event needs to be remapped
  216. [ 0.697522] imx-sdma 20ec000.sdma: firmware not found
  217. [ 0.700244] imx-sdma 20ec000.sdma: initialized
  218. [ 0.700775] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  219. [ 0.702169] Serial: IMX driver
  220. [ 0.702575] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
  221. [ 1.658197] console [ttymxc0] enabled
  222. [ 1.662739] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
  223. [ 1.671913] serial: Freescale lpuart driver
  224. [ 1.677539] [drm] Initialized drm 1.1.0 20060810
  225. [ 1.682624] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  226. [ 1.689070] Galcore version 5.0.11.25762
  227. [ 2.051260] brd: module loaded
  228. [ 2.054585] loop: module loaded
  229. [ 2.058794] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044
  230. [ 2.066696] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
  231. [ 2.074410] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
  232. [ 2.082298] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  233. [ 2.092989] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  234. [ 2.100194] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  235. [ 2.109246] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  236. [ 2.120731] scsi0 : ahci_platform
  237. [ 2.124488] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
  238. [ 2.133554] libphy: Fixed MDIO Bus: probed
  239. [ 2.138594] 2188000.ethernet supply phy not found, using dummy regulator
  240. [ 2.148750] pps pps0: new PPS source ptp0
  241. [ 2.163121] libphy: fec_enet_mii_bus: probed
  242. [ 2.221127] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
  243. [ 2.233869] fec 2188000.ethernet eth0: registered PHC device 0
  244. [ 2.247888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  245. [ 2.262243] ehci-pci: EHCI PCI platform driver
  246. [ 2.274526] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  247. [ 2.288593] ohci-pci: OHCI PCI platform driver
  248. [ 2.300915] uhci_hcd: USB Universal Host Controller Interface driver
  249. [ 2.315358] usbcore: registered new interface driver usb-storage
  250. [ 2.329347] usbcore: registered new interface driver ums-usbat
  251. [ 2.343163] usbcore: registered new interface driver usbserial
  252. [ 2.356877] usbcore: registered new interface driver usbserial_generic
  253. [ 2.371250] usbserial: USB Serial support registered for generic
  254. [ 2.386010] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  255. [ 2.406404] ci_hdrc ci_hdrc.0: EHCI Host Controller
  256. [ 2.419351] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
  257. [ 2.437372] ata1: SATA link down (SStatus 0 SControl 300)
  258. [ 2.441365] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  259. [ 2.441515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  260. [ 2.441522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  261. [ 2.441529] usb usb1: Product: EHCI Host Controller
  262. [ 2.441534] usb usb1: Manufacturer: Linux 3.14.79 ehci_hcd
  263. [ 2.441539] usb usb1: SerialNumber: ci_hdrc.0
  264. [ 2.442115] hub 1-0:1.0: USB hub found
  265. [ 2.442146] hub 1-0:1.0: 1 port detected
  266. [ 2.445904] ci_hdrc ci_hdrc.1: doesn't support gadget
  267. [ 2.445918] ci_hdrc ci_hdrc.1: EHCI Host Controller
  268. [ 2.446102] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
  269. [ 2.451352] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  270. [ 2.451492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  271. [ 2.451500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  272. [ 2.451506] usb usb2: Product: EHCI Host Controller
  273. [ 2.451511] usb usb2: Manufacturer: Linux 3.14.79 ehci_hcd
  274. [ 2.451516] usb usb2: SerialNumber: ci_hdrc.1
  275. [ 2.452038] hub 2-0:1.0: USB hub found
  276. [ 2.452069] hub 2-0:1.0: 1 port detected
  277. [ 2.452812] mousedev: PS/2 mouse device common for all mice
  278. [ 2.553417] rtc-pcf8523: probe of 2-0068 failed with error -110
  279. [ 2.553986] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
  280. [ 2.554084] i2c /dev entries driver
  281. [ 2.554689] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  282. [ 2.555079] device-mapper: uevent: version 1.0.3
  283. [ 2.555400] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  284. [ 2.555705] sdhci: Secure Digital Host Controller Interface driver
  285. [ 2.555708] sdhci: Copyright(c) Pierre Ossman
  286. [ 2.555710] sdhci-pltfm: SDHCI platform and OF driver helper
  287. [ 2.558368] mmc1: no vqmmc regulator found
  288. [ 2.846772] ahci-imx 2200000.sata: no device found, disabling link.
  289. [ 2.860731] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  290. [ 2.917366] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  291. [ 2.932881] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
  292. [ 2.940231] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  293. [ 2.941953] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  294. [ 2.943651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  295. [ 2.946735] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  296. [ 2.949792] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  297. [ 3.000850] mmc1: new high speed SDIO card at address 0001
  298. [ 3.029695] mmc0: no vqmmc regulator found
  299. [ 3.041403] 2194000.usdhc supply card-external-vcc not found, using dummy regulator
  300. [ 3.127359] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  301. [ 3.142499] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  302. [ 3.158276] mxc_vpu 2040000.vpu: VPU initialized
  303. [ 3.170845] mxc_hdmi_cec hdmi_cec.4: HDMI CEC initialized
  304. [ 3.187013] mmc0: host does not support reading read-only switch. assuming write-enable.
  305. [ 3.205598] mmc0: new SDHC card at address aaaa
  306. [ 3.217762] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
  307. [ 3.231427] mmcblk0: p1 p2 p3
  308. [ 3.439319] caam 2100000.caam: Instantiated RNG4 SH0
  309. [ 3.694726] caam 2100000.caam: Instantiated RNG4 SH1
  310. [ 3.706793] caam 2100000.caam: device ID = 0x0a160100 (Era 4)
  311. [ 3.719594] caam 2100000.caam: job rings = 2, qi = 0
  312. [ 3.745240] alg: No test for authencesn(hmac(md5),cbc(aes)) (authencesn-hmac-md5-cbc-aes-caam)
  313. [ 3.763932] alg: No test for authencesn(hmac(sha1),cbc(aes)) (authencesn-hmac-sha1-cbc-aes-caam)
  314. [ 3.780246] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
  315. [ 3.796430] alg: No test for authencesn(hmac(sha224),cbc(aes)) (authencesn-hmac-sha224-cbc-aes-caam)
  316. [ 3.815726] alg: No test for authencesn(hmac(sha256),cbc(aes)) (authencesn-hmac-sha256-cbc-aes-caam)
  317. [ 3.832293] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
  318. [ 3.848707] alg: No test for authencesn(hmac(md5),cbc(des3_ede)) (authencesn-hmac-md5-cbc-des3_ede-caam)
  319. [ 3.866237] alg: No test for authencesn(hmac(sha1),cbc(des3_ede)) (authencesn-hmac-sha1-cbc-des3_ede-caam)
  320. [ 3.883986] alg: No test for authencesn(hmac(sha224),cbc(des3_ede)) (authencesn-hmac-sha224-cbc-des3_ede-caam)
  321. [ 3.902070] alg: No test for authencesn(hmac(sha256),cbc(des3_ede)) (authencesn-hmac-sha256-cbc-des3_ede-caam)
  322. [ 3.919549] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
  323. [ 3.935096] alg: No test for authencesn(hmac(md5),cbc(des)) (authencesn-hmac-md5-cbc-des-caam)
  324. [ 3.951804] alg: No test for authencesn(hmac(sha1),cbc(des)) (authencesn-hmac-sha1-cbc-des-caam)
  325. [ 3.968744] alg: No test for authencesn(hmac(sha224),cbc(des)) (authencesn-hmac-sha224-cbc-des-caam)
  326. [ 3.986049] alg: No test for authencesn(hmac(sha256),cbc(des)) (authencesn-hmac-sha256-cbc-des-caam)
  327. [ 4.003564] caam algorithms registered in /proc/crypto
  328. [ 4.037307] caam_jr 2101000.jr0: registering rng-caam
  329. [ 4.050659] hidraw: raw HID events driver (C) Jiri Kosina
  330. [ 4.063922] usbcore: registered new interface driver usbhid
  331. [ 4.077104] usbhid: USB HID core driver
  332. [ 4.151056] imx-spdif sound-spdif.28: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
  333. [ 4.184366] imx-audio-hdmi sound-hdmi.29: hdmi-hifi <-> hdmi_audio.3 mapping ok
  334. [ 4.201145] ip_tables: (C) 2000-2006 Netfilter Core Team
  335. [ 4.214206] TCP: cubic registered
  336. [ 4.225217] Initializing XFRM netlink socket
  337. [ 4.237944] NET: Registered protocol family 10
  338. [ 4.251101] mip6: Mobile IPv6
  339. [ 4.261803] NET: Registered protocol family 17
  340. [ 4.273998] 8021q: 802.1Q VLAN Support v1.8
  341. [ 4.285852] Key type dns_resolver registered
  342. [ 4.299644] registered taskstats version 1
  343. [ 4.309831] regulator-dummy: disabling
  344. [ 4.320105] input: gpio-keys.26 as /devices/soc0/gpio-keys.26/input/input0
  345. [ 4.333210] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
  346. [ 4.348745] ALSA device list:
  347. [ 4.357671] #0: Integrated SPDIF
  348. [ 4.366993] #1: imx-hdmi-soc
  349. [ 4.376261] Freeing unused kernel memory: 340K (c0a04000 - c0a59000)
  350. [ 4.529547] Booting Volumio for Hardware : Freescale i.MX6 Quad/DualLite (Device Tree)
  351. [ 4.543568] This script mounts rootfs RO with an overlay RW layer.
  352. [ 4.566491] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  353. [ 4.594737] IMGPART=/dev/mmcblk0p2
  354. [ 4.605469] IMGFILE=/volumio_current.sqsh
  355. [ 4.700816] /dev/mmcblk0p2: LABEL="volumio" UUID="b6ce52a8-420b-4959-b5d1-8276e308b8ff" TYPE="ext4" PARTUUID="9b49000d-02"
  356. [ 5.949001] EXT4-fs (mmcblk0p2): recovery complete
  357. [ 5.972614] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  358. [ 5.999463] Checking for USB updates
  359. [ 6.265418] No USB device detected (when incorrect, try adding 'bootdelay=5' to your boot cmdline)
  360. [ 6.301089] Device node does not exist, creating it...
  361. [ 6.451272] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  362. [ 6.506675] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  363. [ 6.542074] random: nonblocking pool is initialized
  364. [ 6.648722] EXT4-fs (mmcblk0p3): recovery complete
  365. [ 6.671705] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  366. [ 6.698758] Without Option: NOWRKDIR
  367. [ 6.799611] VOLUMIO_VERSION="2.173"
  368. [ 6.819211] Finish initramfs, continue booting Volumio
  369. [ 7.373300] SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.29: No such file or directory
  370. [ 7.445013] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  371. [ 7.467377] systemd[1]: Detected architecture 'arm'.
  372. [ 7.527460] systemd[1]: Set hostname to <volumio>.
  373. [ 7.888217] systemd[1]: [/lib/systemd/system/iptables.service:6] Failed to parse service restart specifier, ignoring: never
  374. [ 7.929811] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory.
  375. [ 7.954515] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  376. [ 7.981868] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  377. [ 7.999137] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  378. [ 8.016038] systemd[1]: Expecting device dev-ttymxc0.device...
  379. [ 8.040939] systemd[1]: Starting Remote File Systems (Pre).
  380. [ 8.065638] systemd[1]: Reached target Remote File Systems (Pre).
  381. [ 8.081141] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  382. [ 8.109740] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  383. [ 8.128783] systemd[1]: Starting Encrypted Volumes.
  384. [ 8.153243] systemd[1]: Reached target Encrypted Volumes.
  385. [ 8.168657] systemd[1]: Starting Swap.
  386. [ 8.187952] systemd[1]: Reached target Swap.
  387. [ 8.199797] systemd[1]: Expecting device dev-mmcblk0p1.device...
  388. [ 8.221262] systemd[1]: Starting Root Slice.
  389. [ 8.241033] systemd[1]: Created slice Root Slice.
  390. [ 8.253362] systemd[1]: Starting User and Session Slice.
  391. [ 8.274645] systemd[1]: Created slice User and Session Slice.
  392. [ 8.288095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  393. [ 8.310721] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  394. [ 8.325516] systemd[1]: Starting Delayed Shutdown Socket.
  395. [ 8.346728] systemd[1]: Listening on Delayed Shutdown Socket.
  396. [ 8.360253] systemd[1]: Starting Journal Socket (/dev/log).
  397. [ 8.381821] systemd[1]: Listening on Journal Socket (/dev/log).
  398. [ 8.395561] systemd[1]: Starting udev Control Socket.
  399. [ 8.416481] systemd[1]: Listening on udev Control Socket.
  400. [ 8.429619] systemd[1]: Starting udev Kernel Socket.
  401. [ 8.450282] systemd[1]: Listening on udev Kernel Socket.
  402. [ 8.463138] systemd[1]: Starting Journal Socket.
  403. [ 8.483119] systemd[1]: Listening on Journal Socket.
  404. [ 8.495523] systemd[1]: Starting System Slice.
  405. [ 8.514875] systemd[1]: Created slice System Slice.
  406. [ 8.527038] systemd[1]: Starting system-systemd\x2dfsck.slice.
  407. [ 8.547797] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  408. [ 8.561358] systemd[1]: Starting system-getty.slice.
  409. [ 8.581213] systemd[1]: Created slice system-getty.slice.
  410. [ 8.593868] systemd[1]: Starting system-serial\x2dgetty.slice.
  411. [ 8.614359] systemd[1]: Created slice system-serial\x2dgetty.slice.
  412. [ 8.627576] systemd[1]: Starting Restore / save the current clock...
  413. [ 8.653708] systemd[1]: Mounted Huge Pages File System.
  414. [ 8.666206] systemd[1]: Mounting POSIX Message Queue File System...
  415. [ 8.694311] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  416. [ 8.721428] systemd[1]: Mounted Debug File System.
  417. [ 8.790108] systemd[1]: Started Set Up Additional Binary Formats.
  418. [ 8.806553] systemd[1]: Starting Load Kernel Modules...
  419. [ 8.828835] systemd[1]: Starting udev Coldplug all Devices...
  420. [ 8.851899] systemd[1]: Starting Journal Service...
  421. [ 8.881457] systemd[1]: Started Journal Service.
  422. [ 9.347009] systemd-udevd[282]: starting version 215
  423. [ 9.614664] IR keymap rc-rc6-mce not found
  424. [ 9.625929] Registered IR keymap rc-empty
  425. [ 9.637462] input: gpio_ir_recv as /devices/soc0/ir-receiver.24/rc/rc0/input1
  426. [ 9.652192] rc0: gpio_ir_recv as /devices/soc0/ir-receiver.24/rc/rc0
  427. [ 9.667050] IR RC6 protocol handler initialized
  428. [ 9.667053] IR RC5(x) protocol handler initialized
  429. [ 9.667059] IR NEC protocol handler initialized
  430. [ 9.672605] IR JVC protocol handler initialized
  431. [ 9.675753] IR Sony protocol handler initialized
  432. [ 9.681388] IR SANYO protocol handler initialized
  433. [ 9.684033] IR MCE Keyboard/mouse protocol handler initialized
  434. [ 9.693095] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input2
  435. [ 9.713146] lirc_dev: IR Remote Control driver registered, major 242
  436. [ 9.714296] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
  437. [ 9.714301] IR LIRC bridge handler initialized
  438. [ 10.297254] cfg80211: Calling CRDA to update world regulatory domain
  439. [ 10.537642] usbcore: registered new interface driver brcmfmac
  440. [ 10.990578] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 25 2011 19:34:12 version 5.90.125.104
  441. [ 11.014900] cfg80211: World regulatory domain updated:
  442. [ 11.027418] cfg80211: DFS Master region: unset
  443. [ 11.031937] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  444. [ 11.054472] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  445. [ 11.069596] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  446. [ 11.084362] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  447. [ 11.098716] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  448. [ 11.113211] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  449. [ 11.128282] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
  450. [ 11.128287] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  451. [ 11.128291] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  452. [ 11.468689] systemd-journald[265]: Received request to flush runtime journal from PID 1
  453. [ 11.965718] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  454. [ 12.273889] libphy: 2188000.ethernet:00 - Link is Up - 1000/Full
  455. [ 15.301182] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  456. [ 16.156109] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  457. [ 21.599915] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  458.  
  459. Debian GNU/Linux 8 volumio ttymxc0
  460.  
  461. volumio login: [ 28.715374] brcmfmac: brcmf_cfg80211_stop_ap: SET SSID error (-52)
  462. [ 28.722023] brcmfmac: brcmf_cfg80211_stop_ap: BRCMF_C_DOWN error -52
  463. [ 28.728746] brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52
  464. [ 28.735820] brcmfmac: brcmf_cfg80211_stop_ap: setting INFRA mode failed -52
  465. [ 28.742996] brcmfmac: brcmf_cfg80211_stop_ap: restoring REGULATORY setting failed -52
  466. [ 28.751065] brcmfmac: brcmf_cfg80211_stop_ap: BRCMF_C_UP error -52
  467. [ 28.757411] brcmfmac: brcmf_set_mpc: fail to set mpc
  468. [ 30.077889] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  469. [ 55.454100] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  470. [ 55.803258] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  471. [ 144.905878] Unable to handle kernel paging request at virtual address 39f93d7f
  472. [ 144.913279] pgd = db148000
  473. [ 144.916100] [39f93d7f] *pgd=00000000
  474. [ 144.919849] Internal error: Oops: 5 [#1] SMP ARM
  475. [ 144.924617] Modules linked in: rpcsec_gss_krb5 xt_REDIRECT cpufreq_stats iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nfsd brcmfmac brcmutil cfg80211 rfkill ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_rc6_decoder ir_nec_decoder gpio_ir_recv squashfs overlayfs
  476. [ 144.957110] CPU: 2 PID: 1241 Comm: mpd Not tainted 3.14.79 #2
  477. [ 144.962985] task: db334d00 ti: db776000 task.ti: db776000
  478. [ 144.968514] PC is at mem_cgroup_page_lruvec+0x58/0x7c
  479. [ 144.973684] LR is at 0x10000
  480. [ 144.976634] pc : [<c00fbccc>] lr : [<00010000>] psr: 200d0093
  481. [ 144.976634] sp : db777cf0 ip : c0ab1b40 fp : dc3fb5e0
  482. [ 144.988351] r10: 600d0013 r9 : ef74acac r8 : c0ab0b40
  483. [ 144.993690] r7 : ef74accc r6 : dc3fb5e0 r5 : c0ab0b40 r4 : c0a63130
  484. [ 145.000358] r3 : fd5eecfb r2 : 00000008 r1 : 39f93b33 r0 : eef74d78
  485. [ 145.007028] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
  486. [ 145.014405] Control: 10c53c7d Table: 2b14804a DAC: 00000015
  487. [ 145.020277] Process mpd (pid: 1241, stack limit = 0xdb776238)
  488. [ 145.026149] Stack: (0xdb777cf0 to 0xdb778000)
  489. [ 145.030604] 7ce0: 00000000 c0ab0b40 00000007 c00c6bb0
  490. [ 145.038957] 7d00: db777d90 da00e800 c00c5eb4 00000000 00000006 c0a57cac 2ecf3000 dde695c0
  491. [ 145.047310] 7d20: ef74acac db776000 db777d90 c01d4f28 dde695c0 c00c6cd8 dde695c0 00000000
  492. [ 145.055663] 7d40: d93dd964 00000100 db776000 c00ba984 db777dfc 00000200 d93dd964 c00c57b0
  493. [ 145.064016] 7d60: db777d90 d93dd888 db777d98 d93dd964 db777dfc db195d80 d93dd964 db777dfc
  494. [ 145.072370] 7d80: 00000100 c01d5c9c 19ec8dff 00000000 db777d98 db758a00 db7db6c0 db7db680
  495. [ 145.080723] 7da0: 00000000 00002000 00020000 00000000 c0051568 d93dd888 c0764ad8 00000000
  496. [ 145.089076] 7dc0: 00000000 db777dc0 c0764af4 00000000 00000000 00000000 c01d5bd4 00000100
  497. [ 145.097428] 7de0: 00000100 00000417 d93dd968 c00c59c0 00000000 db195d80 db776000 dd7e25b4
  498. [ 145.105782] 7e00: dde69574 91827364 db777e08 db777e08 db777e10 db777e10 db777e18 db777e18
  499. [ 145.114134] 7e20: 00000000 d93dd964 00000040 dd7e0680 db777f08 00001000 d93dd888 00000000
  500. [ 145.122490] 7e40: db195d80 c00bcc90 00000100 00000006 5b2bb8e9 00000014 d8059bb0 00000000
  501. [ 145.130842] 7e60: 0003b000 00000000 0003c000 00000000 00000000 00000000 db195de8 00000046
  502. [ 145.139195] 7e80: 0000003f db777f10 00080001 00000001 ffffff9c 00000000 00004000 00006000
  503. [ 145.147549] 7ea0: af4e06dc 00000000 544c160a d93dd888 0003c000 00000000 00000001 db777f08
  504. [ 145.155905] 7ec0: db777f10 00000000 af4e8784 c01ca6b4 0003c000 00000000 00000066 0000001d
  505. [ 145.164258] 7ee0: 00000000 db777f88 db334d00 0003c000 00000000 c000e4e4 db776000 c01031d4
  506. [ 145.172611] 7f00: 0003c000 00000000 af4dc6dc 0000a000 db195d80 00000000 00000000 00000000
  507. [ 145.180963] 7f20: db334d00 00000000 00000000 00000000 0003c000 00000000 0000a000 00000000
  508. [ 145.189318] 7f40: 00000000 00000000 db776020 db777f88 db776020 af4dc6dc db195d80 c01038d8
  509. [ 145.197670] 7f60: 00000000 00000000 db195d80 db195d83 af4dc6dc 0000a000 c000e4e4 db776000
  510. [ 145.206022] 7f80: 00000000 c0104078 0003c000 00000000 00000002 b6fb1f68 b6f01f10 aeb58174
  511. [ 145.214375] 7fa0: 00000003 c000e360 b6fb1f68 b6f01f10 00000014 af4dc6dc 0000a000 2f626700
  512. [ 145.222728] 7fc0: b6fb1f68 b6f01f10 aeb58174 00000003 00000000 00000000 af4dc6dc af4e8784
  513. [ 145.231082] 7fe0: 00000000 af4d6d20 b541d579 b541d580 800d0030 00000014 00000000 00000000
  514. [ 145.239455] [<c00fbccc>] (mem_cgroup_page_lruvec) from [<c00c6bb0>] (pagevec_lru_move_fn+0x9c/0xfc)
  515. [ 145.248708] [<c00c6bb0>] (pagevec_lru_move_fn) from [<c00c6cd8>] (__lru_cache_add+0x74/0x8c)
  516. [ 145.257339] [<c00c6cd8>] (__lru_cache_add) from [<c00ba984>] (add_to_page_cache_lru+0x28/0x44)
  517. [ 145.266147] [<c00ba984>] (add_to_page_cache_lru) from [<c00c57b0>] (read_cache_pages+0x68/0x110)
  518. [ 145.275130] [<c00c57b0>] (read_cache_pages) from [<c01d5c9c>] (nfs_readpages+0xc8/0x18c)
  519. [ 145.283404] [<c01d5c9c>] (nfs_readpages) from [<c00c59c0>] (__do_page_cache_readahead+0x168/0x22c)
  520. [ 145.292559] [<c00c59c0>] (__do_page_cache_readahead) from [<c00bcc90>] (generic_file_aio_read+0x5e0/0x710)
  521. [ 145.302426] [<c00bcc90>] (generic_file_aio_read) from [<c01ca6b4>] (nfs_file_read+0x78/0x118)
  522. [ 145.311145] [<c01ca6b4>] (nfs_file_read) from [<c01031d4>] (do_sync_read+0x80/0xa8)
  523. [ 145.326466] [<c01031d4>] (do_sync_read) from [<c01038d8>] (vfs_read+0x94/0x16c)
  524. [ 145.341484] [<c01038d8>] (vfs_read) from [<c0104078>] (SyS_read+0x44/0x9c)
  525. [ 145.356119] [<c0104078>] (SyS_read) from [<c000e360>] (ret_fast_syscall+0x0/0x38)
  526. [ 145.371300] Code: e1510003 11a01003 15803004 e5962000 (e591324c)
  527. [ 145.385042] ---[ end trace 475dbc5af2e027ba ]---
  528. [ 157.527912] Unable to handle kernel paging request at virtual address 63b53ac1
  529. [ 157.542986] pgd = c0004000
  530. [ 157.553499] [63b53ac1] *pgd=00000000
  531. [ 157.564921] Internal error: Oops: 5 [#2] SMP ARM
  532. [ 157.577314] Modules linked in: rpcsec_gss_krb5 xt_REDIRECT cpufreq_stats iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nfsd brcmfmac brcmutil cfg80211 rfkill ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_rc6_decoder ir_nec_decoder gpio_ir_recv squashfs overlayfs
  533. [ 157.626088] CPU: 0 PID: 715 Comm: avahi-daemon Tainted: G D 3.14.79 #2
  534. [ 157.642124] task: da5fb700 ti: db0f2000 task.ti: db0f2000
  535. [ 157.656165] PC is at mem_cgroup_charge_statistics+0x4/0x74
  536. [ 157.670250] LR is at __mem_cgroup_uncharge_common+0x90/0x2cc
  537. [ 157.684459] pc : [<c00f80a0>] lr : [<c00fac94>] psr: 200b0113
  538. [ 157.684459] sp : db0f3d10 ip : 00000000 fp : 00a5d000
  539. [ 157.713147] r10: c0a624d0 r9 : 00000000 r8 : 63b53955
  540. [ 157.726646] r7 : c0a63130 r6 : dc485bc0 r5 : eef976f0 r4 : 00000001
  541. [ 157.741146] r3 : ffffffff r2 : 00000001 r1 : dc485bc0 r0 : 63b53955
  542. [ 157.755523] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  543. [ 157.770541] Control: 10c53c7d Table: 2b16004a DAC: 00000015
  544. [ 157.784178] Process avahi-daemon (pid: 715, stack limit = 0xdb0f2238)
  545. [ 157.798559] Stack: (0xdb0f3d10 to 0xdb0f4000)
  546. [ 157.810832] 3d00: dc485bc0 ffffffff 00000001 dc485bc0
  547. [ 157.827055] 3d20: 00a7e000 00000000 c0a624d0 c00e5060 0011549c c0ab1d44 daac1178 db0f3dd8
  548. [ 157.843324] 3d40: daac1174 c00dafe0 00000000 da7bdcb8 db16002c 00000000 242de75f c0a66584
  549. [ 157.859648] 3d60: c0b11800 da52a000 dc555820 00a7e000 db160028 00a7dfff dd7de3c0 00000000
  550. [ 157.875991] 3d80: ffffffed 00000000 c00c5eb4 da7bdcb8 ffffffff db0f3dd8 00000000 00000000
  551. [ 157.892326] 3da0: db0f2008 da52a038 da58bc80 c00dc4ac 00000000 00000001 da7fb160 db0f3e00
  552. [ 157.908655] 3dc0: da52a000 da52a000 00000001 c00e2cb4 da5fbad8 00000000 da52a000 00000001
  553. [ 157.924989] 3de0: 00000000 00000000 ffffffff c0037bd4 da5fb700 00000029 00000400 db698000
  554. [ 157.941316] 3e00: db0f3e00 db0f3e00 00000000 00000000 db0f3e00 db0f3e00 db0f2008 da52a000
  555. [ 157.957627] 3e20: da5fb700 da52a000 da5fb700 da58bc80 da52a000 c002867c 0000041c da5fb700
  556. [ 157.973924] 3e40: da58bc80 c002d560 db0f3ef4 c0036f10 db0f2000 c0036894 db0f3ef4 db0f3fb0
  557. [ 157.990201] 3e60: 00000000 0000000b db0f2000 da58bc80 db0f2020 da644944 db0f2000 db0f2000
  558. [ 158.006469] 3e80: da58bc80 c002dc9c db0f2000 0000000b db0f3ef4 db0f2020 da644944 c0039264
  559. [ 158.022748] 3ea0: 00000000 da644440 418004fc c0a62564 c0a5c040 db0f3ee0 00000000 db0f2020
  560. [ 158.039041] 3ec0: db0f3ee0 db0f3fb0 00000000 00000000 db0f3ef4 00000000 00000000 c0010e74
  561. [ 158.055339] 3ee0: db0f3fb0 c001a06c 00030001 db0f3fb0 db0f2000 0000000b 00000000 00030001
  562. [ 158.071628] 3f00: d9459b64 d85989d8 daada0c0 da1d3c00 00000001 00000000 00000000 00000000
  563. [ 158.087903] 3f20: 00000000 00000001 00000000 00000000 00000000 00000000 00000001 daada0c0
  564. [ 158.104145] 3f40: 00000001 db0f2020 00000000 d85989d8 00000002 daada0c8 00000000 c0103b24
  565. [ 158.120354] 3f60: 00000000 00000000 daada0c0 daada0c0 bec12b4f 00000001 db0f2018 db0f3fb0
  566. [ 158.136583] 3f80: db0f2000 00000000 00000000 db0f2000 00000000 c001131c b6f6f97c 800b0030
  567. [ 158.152828] 3fa0: ffffffff 00a5aa50 00000000 c000e3a8 b6f7e000 00000820 d9459344 b6f4af68
  568. [ 158.169094] 3fc0: b6f4af60 d9459b64 00a54518 00a5aa50 00000000 00000000 00000000 00000000
  569. [ 158.185367] 3fe0: b6f4b41c bec12b48 b6f741d0 b6f6f97c 800b0030 ffffffff ffffffff ffffffff
  570. [ 158.201691] [<c00f80a0>] (mem_cgroup_charge_statistics) from [<c00fac94>] (__mem_cgroup_uncharge_common+0x90/0x2cc)
  571. [ 158.220399] [<c00fac94>] (__mem_cgroup_uncharge_common) from [<c00e5060>] (page_remove_rmap+0xc4/0x164)
  572. [ 158.238094] [<c00e5060>] (page_remove_rmap) from [<c00dafe0>] (unmap_single_vma+0x360/0x66c)
  573. [ 158.254904] [<c00dafe0>] (unmap_single_vma) from [<c00dc4ac>] (unmap_vmas+0x54/0x68)
  574. [ 158.270996] [<c00dc4ac>] (unmap_vmas) from [<c00e2cb4>] (exit_mmap+0xdc/0x1f4)
  575. [ 158.286581] [<c00e2cb4>] (exit_mmap) from [<c002867c>] (mmput+0x54/0x110)
  576. [ 158.301721] [<c002867c>] (mmput) from [<c002d560>] (do_exit+0x2d8/0x9ac)
  577. [ 158.316771] [<c002d560>] (do_exit) from [<c002dc9c>] (do_group_exit+0x3c/0xc4)
  578. [ 158.332357] [<c002dc9c>] (do_group_exit) from [<c0039264>] (get_signal_to_deliver+0x230/0x5c0)
  579. [ 158.349378] [<c0039264>] (get_signal_to_deliver) from [<c0010e74>] (do_signal+0x104/0x44c)
  580. [ 158.366022] [<c0010e74>] (do_signal) from [<c001131c>] (do_work_pending+0x6c/0xa4)
  581. [ 158.381932] [<c001131c>] (do_work_pending) from [<c000e3a8>] (work_pending+0xc/0x20)
  582. [ 158.397995] Code: 12800e1b 03a00000 e12fff1e e3520000 (e590216c)
  583. [ 158.412468] ---[ end trace 475dbc5af2e027bb ]---
  584. [ 158.426042] Fixing recursive fault but reboot is needed!
  585. [ 165.196823] EXT4-fs error (device mmcblk0p3): ext4_map_blocks:586: inode #196646: block 790580: comm nmbd: lblock 0 mapped to illegal pblock (length 1)
  586. [ 165.197947] EXT4-fs error (device mmcblk0p3): ext4_map_blocks:586: inode #196635: block 790577: comm nmbd: lblock 0 mapped to illegal pblock (length 1)
  587. [ 165.199148] EXT4-fs error (device mmcblk0p3): ext4_map_blocks:586: inode #196636: block 790578: comm smbd: lblock 0 mapped to illegal pblock (length 1)
  588. [ 189.313725] EXT4-fs error (device mmcblk0p3): ext4_map_blocks:586: inode #196646: block 790580: comm nmbd: lblock 0 mapped to illegal pblock (length 1)
  589. [ 205.747334] INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=60002 jiffies, g=7456, c=7455, q=165)
  590. [ 205.766375] Task dump for CPU 1:
  591. [ 205.777711] node R running 0 1107 1 0x00000002
  592. [ 205.792250] [<c0750344>] (__schedule) from [<00000000>] ( (null))
  593. [ 217.749466] systemd[1]: Starting Journal Service...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!