Gazzeh

Untitled

Jun 2nd, 2017
97
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.18 KB | None | 0 0
  1. WHEELS (Taking off )
  2. 2017-06-02 14:32:53 ★ Richard Hawkins would walk over to the shelf in the garage as he'd then move his right hand up to the
  3. 2017-06-02 14:33:14 ★ handlebar of his toolbox and grabs a firm grip of it, pulling it off the shelf as he then ((Richard Hawkins))
  4. 2017-06-02 14:33:34 ★ carries it over to the lift that the Porsche is on. ((Richard Hawkins))
  5. 2017-06-02 14:33:57 ★ Richard Hawkins would lean forwards as he'd place the toolbox down on the ground, releasing the handlebar
  6. 2017-06-02 14:34:28 ★ and stands up straight, moving his right hand to the left controls, turning a switch, ((Richard Hawkins))
  7. 2017-06-02 14:34:57 ★ switching the lift to only lift the center of the lift as he'd then hold down a black button ((Richard Hawkins))
  8. 2017-06-02 14:35:24 ★ making the center of the lift to rise, lifting the car up from the rocker panels. ((Richard Hawkins))
  9. 2017-06-02 14:35:54 ★ Richard Hawkins would then release the button when all the four wheels are off the ground and in the air.
  10. 2017-06-02 14:37:16 ★ Richard Hawkins would then crouch down to his toolbox, using both of his hands to open it and reaches for
  11. 2017-06-02 14:38:05 ★ the cordless impact wrench , holding it in his left hand as he'd then look around for 21mm ((Richard Hawkins))
  12. 2017-06-02 14:38:35 ★ socket as he'd then connect the two, pushing a button on the impact wrench so it'd ((Richard Hawkins))
  13. 2017-06-02 14:38:57 ★ spin counter clockwise as he then stands up and walks to the left front wheel of the ((Richard Hawkins))
  14. 2017-06-02 14:39:34 ★ porsche and uses the impact wrench to loosen up and remove all of the 5 lugnuts, placing ((Richard Hawkins))
  15. 2017-06-02 14:39:57 ★ them onto the lift with the impact wrench as he'd then reach for the wheel with both his ((Richard Hawkins))
  16. 2017-06-02 14:40:21 ★ hands, pulling it off of the wheelhub and lowering it down to the ground, on its side. ((Richard Hawkins))
  17. 2017-06-02 14:40:38 ★ Richard Hawkins would then reach for the impact wrench and moves to the rear left of the car as he then
  18. 2017-06-02 14:41:16 ★ starts to loosen up and remove all 5 of the lugnuts and places them down on the lift with hi ((Richard Hawkins))
  19. 2017-06-02 14:41:38 ★ his impact wrench as he then reaches for the rim with both his hands and pulls it off of the ((Richard Hawkins))
  20. 2017-06-02 14:42:09 ★ wheelhub, lowering the wheel down on it's side as he then stands up straight and walks to ((Richard Hawkins))
  21. 2017-06-02 14:42:15 ★ the other side of the car. ((Richard Hawkins))
  22. 2017-06-02 14:43:53 ★ Richard Hawkins would walk to the right front wheel and uses the impact wrench to start loosening up and
  23. 2017-06-02 14:44:11 ★ removing the 5 lugnuts, placing them on the lift with the impact wrench as he then reaches ((Richard Hawkins))
  24. 2017-06-02 14:44:29 ★ for the wheel with both his hands and pulls the wheel off of the wheelhub as he then lowers ((Richard Hawkins))
  25. 2017-06-02 14:44:56 ★ the wheel down to the ground, on its side and stands up straight, taking the impact wrench ((Richard Hawkins))
  26. 2017-06-02 14:45:12 ★ and walking to the rear right and uses the impacct wrench to loosen up and remove ((Richard Hawkins))
  27. 2017-06-02 14:45:43 ★ all five of the lugnuts, placing them on the lift with the impact wrench as he then reaches ((Richard Hawkins))
  28. 2017-06-02 14:46:09 ★ for the rim with both his hands , pulling the wheel off of the wheelhub, lowering the last ((Richard Hawkins))
  29. 2017-06-02 14:46:30 ★ wheel down on its side and inspects the rear suspension assembly. ((Richard Hawkins))
  30.  
  31. Front left brake caliper + rotor + pads + brakeline
  32.  
  33. 2017-06-02 19:49:10 ★ Richard Hawkins would then walk to the toolbox that's near the front left of the car and crouches down to it
  34. 2017-06-02 19:50:25 ★ as he then reaches into it and grabs ahold of a socket wrench and 17mm socket and attaches ((Richard Hawkins))
  35. 2017-06-02 19:51:12 ★ them, as he'd then stand up and leans forwards into the wheelhub, placing the 17mm wrench to ((Richard Hawkins))
  36. 2017-06-02 19:52:39 ★ the braket that holds the brake caliper in place and starts loosening up and removing ((Richard Hawkins))
  37. 2017-06-02 19:52:56 ★ two 17mm bolts. ((Richard Hawkins))
  38. 2017-06-02 19:53:24 ★ Richard Hawkins would then place the socket wrench down on the lift and places both his hands to the caliper
  39. 2017-06-02 19:53:59 ★ pulling it towards himself as it'd then end up pushing the pistons into the caliper, ((Richard Hawkins))
  40. 2017-06-02 19:54:11 ★ loosening the caliper and brake pads from the rotor. ((Richard Hawkins))
  41. 2017-06-02 19:55:24 ★ Richard Hawkins would then let the brake caliper hang down from the brake line, as he is going to replace
  42. 2017-06-02 19:56:13 ★ that anyways and picks up the socket wrench again, loosening up other two bolts, holding the ((Richard Hawkins))
  43. 2017-06-02 19:59:15 ★ that hold the* braket in place, loosening up the braket and removing it from the wheel hub ((Richard Hawkins))
  44. 2017-06-02 19:59:23 ★ afterwards, placing it on the lift. ((Richard Hawkins))
  45. 2017-06-02 20:00:17 ★ Richard Hawkins would then place the socket wrench down on the lift again and crouches down to his toolbox
  46. 2017-06-02 20:00:51 ★ reaching for a philips headed screwdriver and standing back up, loosening up the screw that ((Richard Hawkins))
  47. 2017-06-02 20:01:07 ★ hold the brake rotor on the wheelhub. ((Richard Hawkins))
  48. 2017-06-02 20:05:36 ★ Richard Hawkins would then place the screwdriver down and reaches for the brake rotor, pulling it off of the
  49. 2017-06-02 20:06:09 ★ wheelhub and placing it on the lift aswell, as he'd then start making his way to the shelf ((Richard Hawkins))
  50. 2017-06-02 20:06:35 ★ and picking up the cardboard box, containing the front brake rotors, calipers, new brake pad ((Richard Hawkins))
  51. 2017-06-02 20:07:01 ★ s and new brakelines as he'd then take it to the lift, placing the cardboard box down on the ((Richard Hawkins))
  52. 2017-06-02 20:07:53 ★ ground and opens it, using both his hands as it'd then reveal another cardboard box, ((Richard Hawkins))
  53. 2017-06-02 20:08:28 ★ that he'd open aswell, grabbing ahold of the new brake rotor and the new screw for it as ((Richard Hawkins))
  54. 2017-06-02 20:08:55 ★ he'd then stand back up straight, placing the rotor in place and reaching for the screwdrive ((Richard Hawkins))
  55. 2017-06-02 20:09:19 ★ r with his right hand as he'd then use it to screw in the tiny screw that holds the brake ((Richard Hawkins))
  56. 2017-06-02 20:09:23 ★ rotor in place. ((Richard Hawkins))
  57. 2017-06-02 20:12:30 ★ Richard Hawkins would then place the screwdriver back down and bends down to the cardboard box,
  58. 2017-06-02 20:12:58 ★ grabbing ahold of the new brake caliper, pads and a new brakeline as he'd then place them on ((Richard Hawkins))
  59. 2017-06-02 20:13:09 ★ the lift and unwraps them from their packaging. ((Richard Hawkins))
  60. 2017-06-02 20:13:55 ★ Richard Hawkins would then take the brakeline and secures one end of it into the brake caliper as he'd then
  61. 2017-06-02 20:14:35 ★ reach into the toolbox, grabbing a 8mm and 11mm wrenches, using the 8mm wrench to tighten ((Richard Hawkins))
  62. 2017-06-02 20:15:27 ★ the brakeline to the caliper, and places the caliper down on the lift with the brakeline as ((Richard Hawkins))
  63. 2017-06-02 20:16:04 ★ he'd then take the 11mm wrench and uses it to disconnect the old brakeline from within the ((Richard Hawkins))
  64. 2017-06-02 20:16:23 ★ the wheelhub, letting some of the brake fluid leak down to the floor. ((Richard Hawkins))
  65. 2017-06-02 20:16:52 ★ Richard Hawkins would then place the old brake caliper and line onto the lift and takes the new
  66. 2017-06-02 20:17:11 ★ brake caliper and line, handtightening the brakeline from the caliper to the brakeline from ((Richard Hawkins))
  67. 2017-06-02 20:17:35 ★ the master cylinder, using the 11mm wrench afterwards to tighten the connection. ((Richard Hawkins))
  68. 2017-06-02 20:18:23 ★ Richard Hawkins would then place the caliper onto the wheelhub so it wouldnt be tangling down from the line
  69. 2017-06-02 20:18:47 ★ and reaches for the braket that holds the brake caliper in place and for one of the 17mm ((Richard Hawkins))
  70. 2017-06-02 20:19:08 ★ bolts as he'd then handtighten one of the bolts and then the second one afterwards and ((Richard Hawkins))
  71. 2017-06-02 20:19:28 ★ uses the socket wrench to then tighten the braket in place. ((Richard Hawkins))
  72. 2017-06-02 20:20:23 ★ Richard Hawkins would then reach for the new brakepads and unwraps them from their packaging, placing
  73. 2017-06-02 20:20:45 ★ them in place on the bracket and would then reach for the caliper and one 17 mm bolt as he'd ((Richard Hawkins))
  74. 2017-06-02 20:21:18 ★ then handtighten one of the "slider bolts" and the second one afterwards, using the socket ((Richard Hawkins))
  75. 2017-06-02 20:21:37 ★ wrench to tighten the bolts and secure the brakecaliper to the braket. ((Richard Hawkins))
  76.  
  77. Front right brake caliper + rotor + pads + brakeline
  78.  
  79. 2017-06-02 20:30:01 ★ Richard Hawkins would then reach for the tools, collecting them all up and carries them to the other side of
  80. 2017-06-02 20:30:26 ★ the car as he'd then place them down on the lift and walks around the car again, to the ((Richard Hawkins))
  81. 2017-06-02 20:31:00 ★ cardboard box, leaning forwards and picking up the new rotor, caliper, brakeline and pads ((Richard Hawkins))
  82. 2017-06-02 20:31:17 ★ as he then walks to the right side of the car again, placing them down on the lift. ((Richard Hawkins))
  83. 2017-06-02 20:32:47 ★ Richard Hawkins would then reach for the 11mm wrench, loosening up the brakeline from the car right away and
  84. 2017-06-02 20:33:22 ★ lets the rubber hose hang down as he then places the 11mm wrench back down on the lift ((Richard Hawkins))
  85. 2017-06-02 20:33:59 ★ and reaches for the socketwrench, moving it to the back of the wheelhub and uses it to ((Richard Hawkins))
  86. 2017-06-02 20:34:24 ★ loosen up and remove the two 17mm bolts holding the caliper to the braket ((Richard Hawkins))
  87. 2017-06-02 20:34:50 ★ as he'd then place the bolts and the socketwrench down on the lift, placing his hands on the ((Richard Hawkins))
  88. 2017-06-02 20:35:16 ★ brake caliper, pulling it towards himself as it'd then make the brake fluid burst out of ((Richard Hawkins))
  89. 2017-06-02 20:35:24 ★ the end of the brakeline. ((Richard Hawkins))
  90. 2017-06-02 20:35:51 ★ Richard Hawkins would sigh in regret and pulls the caliper off of the wheelhub , placing the old caliper and
  91. 2017-06-02 20:36:15 ★ brakeline onto the lift as he then reaches for the brake pads, removing them from the braket ((Richard Hawkins))
  92. 2017-06-02 20:36:36 ★ as well, placing them next to the old brake caliper. ((Richard Hawkins))
  93. 2017-06-02 20:37:09 ★ Richard Hawkins would then reach for the socketwrench to then loosen up and remove the two 17mm bolts that
  94. 2017-06-02 20:37:37 ★ hold the braket to the wheelhub and places the braket down with the socket wrench. ((Richard Hawkins))
  95. 2017-06-02 20:38:00 ★ Richard Hawkins would then reach for the philips headed screwdriver and uses it to loosen up the screw that
  96. 2017-06-02 20:38:18 ★ holds the brake rotor against the wheelhub. ((Richard Hawkins))
  97. 2017-06-02 20:38:39 ★ Richard Hawkins would then place the screwdriver down and reaches for the rotor, pulling it off of the wheel
  98. 2017-06-02 20:38:49 ★ -hub and places it ontop of the old caliper. ((Richard Hawkins))
  99. 2017-06-02 20:41:26 ★ Richard Hawkins would then reach for the new rotor with both his hands, unwrapping it from the packaging,
  100. 2017-06-02 20:41:55 ★ placing the rotor onto the wheelhub and reaches for the new screw and the screwdriver, ((Richard Hawkins))
  101. 2017-06-02 20:42:29 ★ screwing in the screw, securing the new brake rotor in place as he then places the ((Richard Hawkins))
  102. 2017-06-02 20:43:47 ★ screwdriver down on the lift and reaches for the braket and one of the 17mm bolts, ((Richard Hawkins))
  103. 2017-06-02 20:44:08 ★ handtightening the bolt and then takes the second 17mm bolt, handtightening that aswell ((Richard Hawkins))
  104. 2017-06-02 20:44:34 ★ as he then reaches for the socketwrench and tightens the bolts, securing the braket in place ((Richard Hawkins))
  105. 2017-06-02 20:45:48 ★ Richard Hawkins would then place the socketwrench down on the lift and reaches for the new brake pads and
  106. 2017-06-02 20:46:18 ★ unwraps them, placing them on their place and would then pick up the new brake caliper and ((Richard Hawkins))
  107. 2017-06-02 20:46:36 ★ line as he'd then screw one end of the brakeline into the caliper and uses the 8mm wrench ((Richard Hawkins))
  108. 2017-06-02 20:47:28 ★ to tighten the connection between the two and would then place the caliper to its place and ((Richard Hawkins))
  109. 2017-06-02 20:47:58 ★ handtightens the brakeline from the caliper to the brakeline from the car as he'd then reach ((Richard Hawkins))
  110. 2017-06-02 20:48:51 ★ for the 11mm wrench and tightens the connection between the two as he'd then place ((Richard Hawkins))
  111. 2017-06-02 20:49:31 ★ the wrench down on the lift and reaches for the socket wrench to then place in the ((Richard Hawkins))
  112. 2017-06-02 20:50:01 ★ sliderbolts and tightens them, securing the brakecaliper to the braket. ((Richard Hawkins))
  113. 2017-06-02 20:50:46 ★ Richard Hawkins would then sigh in relief and starts collecting the trash from around the car and wiping
  114. 2017-06-02 20:51:03 ★ the brakefluid off the ground, cleaning his work area. ((Richard Hawkins))
  115.  
  116. Bleeding the brakes
  117.  
  118. 2017-06-02 21:08:33 ★ Richard Hawkins would walk to the driverside door and reaches for the handle, pulling the door open and
  119. 2017-06-02 21:13:45 ★ reaches into the car and pulls on the latch as the trunk would then pop open. ((Richard Hawkins))
  120. 2017-06-02 21:14:56 ★ Richard Hawkins would then close the door and walks to the lift controls as he'd then press on one of the
  121. 2017-06-02 21:15:13 ★ black buttons, lowering the car down closer to the ground. ((Richard Hawkins))
  122. 2017-06-02 21:18:49 ★ Richard Hawkins would then walk to the front of the car and slides his hands under the trunk, flicking a
  123. 2017-06-02 21:19:12 ★ switch as he then lifts the trunk up and makes his way to the shelf again, grabbing ahold of ((Richard Hawkins))
  124. 2017-06-02 21:21:18 ★ the vacuum brake bleeder and a 5 litre brake fluid canister as he then carries them to the ((Richard Hawkins))
  125. 2017-06-02 21:21:21 ★ porsche. ((Richard Hawkins))
  126. 2017-06-02 21:21:42 ★ Richard Hawkins would then lower the stuff into the trunk of the porsche and walks to the air compressor,
  127. 2017-06-02 21:22:11 ★ turning it on as he'd then grab ahold of the pressure hose, taking it to the porsche as ((Richard Hawkins))
  128. 2017-06-02 21:22:31 ★ he'd then connect the hose to the vacuum bleeder. ((Richard Hawkins))
  129. 2017-06-02 21:22:56 ★ Richard Hawkins would then take the vacuum bleeder to the front left of the car as he'd then reach into the
  130. 2017-06-02 21:23:49 ★ toolbox, grabbing ahold of the bleeder wrench . ((Richard Hawkins))
  131. 2017-06-02 21:24:21 ★ Richard Hawkins would then place one end of the wrench over the bleeding valve as he'd then stand up,
  132. 2017-06-02 21:25:36 ★ walking to the front of the car, opening the brake fluid reservoir. ((Richard Hawkins))
  133. 2017-06-02 21:26:04 ★ Richard Hawkins would then open the canister of brakefluid, topping up the brake fluid and walks to the
  134. 2017-06-02 21:26:49 ★ front left again , crouching down as he then places the rubber nozzle of the vacuum bleeder ((Richard Hawkins))
  135. 2017-06-02 21:27:11 ★ over the bleeding valve and moves his left hand to the trigger, holding it down as the ((Richard Hawkins))
  136. 2017-06-02 21:27:31 ★ nozzle would then create a vacuum. ((Richard Hawkins))
  137. 2017-06-02 21:28:11 ★ Richard Hawkins would then move his right hand to the bleeder wrench and loosens the bleeder valve.
  138. 2017-06-02 21:28:39 ★ vacuum bleeder would then start sucking in air and pulling the brake fluid into the ((Richard Hawkins))
  139. 2017-06-02 21:28:48 ★ caliper. ((Richard Hawkins))
  140. 2017-06-02 21:31:16 ★ Richard Hawkins would take a break in the middle to fill up the reservoir and would then continue till there
  141. 2017-06-02 21:31:29 ★ wouldnt be any more air coming through the rubber line ((Richard Hawkins))
  142. 2017-06-02 21:31:56 ★ Richard Hawkins would then tighten the bleeder valve and releases the trigger of the vacuum bleeder.
  143. 2017-06-02 21:33:43 ★ Richard Hawkins would then pull the nozzle off of the bleeder valve and removes the wrench as he then walks
  144. 2017-06-02 21:33:50 ★ to the right side of the car. ((Richard Hawkins))
  145. 2017-06-02 21:35:35 ★ Richard Hawkins would then slide the wrench onto the bleeder valve and would then move the nozzle of the
  146. 2017-06-02 21:36:06 ★ vacuum bleeder over the bleeding valve as he'd then stand up and tops up the brake reservoi ((Richard Hawkins))
  147. 2017-06-02 21:36:14 ★ r. ((Richard Hawkins))
  148. 2017-06-02 21:36:41 ★ Richard Hawkins would then walk back to the vacuum bleeder and holds down the trigger as he'd then open the
  149. 2017-06-02 21:37:10 ★ bleeder valve as the air would then be sucked out of the brake lines and replaced with ((Richard Hawkins))
  150. 2017-06-02 21:37:18 ★ brake fluid. ((Richard Hawkins))
  151. 2017-06-02 21:39:53 ★ Richard Hawkins would stop some time in the middle to then fill up the brake reservoir and continues bleedin
  152. 2017-06-02 21:40:43 ★ the brakes as he'd then tighten the bleeder valve and releases the trigger on the vacuum ((Richard Hawkins))
  153. 2017-06-02 21:40:47 ★ bleeder. ((Richard Hawkins))
  154. 2017-06-02 21:41:33 ★ Richard Hawkins would then slide the rubber nozzle off of the bleeding valve and takes off the wrench aswell
  155. 2017-06-02 21:42:18 ★ as he'd then disconnect the vacuum bleeder from the pressure hose and takes it back to the ((Richard Hawkins))
  156. 2017-06-02 21:42:35 ★ shelf as he then turns off the compressor. ((Richard Hawkins))
  157. 2017-06-02 21:42:51 ★ Richard Hawkins would then walk to the porsche and cleans up the surrounding and places tools back into the
  158. 2017-06-02 21:42:53 ★ toolbox. ((Richard Hawkins))
  159.  
  160. Coils
  161.  
  162. 2017-06-03 16:21:36 ★ Richard Hawkins would walk to the shelf in the garage as he then grabs ahold of a cardboard box that'd
  163. 2017-06-03 16:22:00 ★ contain new coilovers for the Porsche, carrying the package to the porsche, crouching ((Richard Hawkins))
  164. 2017-06-03 16:22:18 ★ down as he places the package down on the ground and opens the packages. ((Richard Hawkins))
  165. 2017-06-03 16:34:56 ★ Richard Hawkins would then reach for the toolbox, using both his hands to open the toolbox as he'd then
  166. 2017-06-03 16:35:56 ★ search for a 17mm socket and connects it to the cordless impact gun as he'd then ((Richard Hawkins))
  167. 2017-06-03 16:36:30 ★ stand up from the ground, reaching under the trunk ( front of the car ) and uses the impact ((Richard Hawkins))
  168. 2017-06-03 16:37:16 ★ gun to loosen up and remove the 17mm nut that holds the old coilover in place as he'd ((Richard Hawkins))
  169. 2017-06-03 16:37:54 ★ then put the nut and washer into his pocket and crouches down to the wheelhub, using the ((Richard Hawkins))
  170. 2017-06-03 16:38:19 ★ impact wrench to loosen up and remove the two nuts and bolts that connect the shock ((Richard Hawkins))
  171. 2017-06-03 16:38:42 ★ absorber to the wheelhub as he'd then place the impact gun down on the lift and ((Richard Hawkins))
  172. 2017-06-03 16:39:15 ★ pockets the nuts and bolts as he'd then grab ahold of the shock absorber and jerking it back ((Richard Hawkins))
  173. 2017-06-03 16:39:45 ★ and forth to get it out of the wheel well and places it down on the floor as he'd then reach ((Richard Hawkins))
  174. 2017-06-03 16:40:06 ★ for the impact gun with his right hand and stands up, walking to the right side of the ((Richard Hawkins))
  175. 2017-06-03 16:40:52 ★ Porsche, reaching under the trunk as he'd then use the impact gun to loosen up and remove the ((Richard Hawkins))
  176. 2017-06-03 16:41:35 ★ Nut and a washer from the top of the old coilover, pocketing them as he'd then crouch down to ((Richard Hawkins))
  177. 2017-06-03 16:42:35 ★ the wheelhub, and uses the impact gun to loosen up the two bolts that hold the ((Richard Hawkins))
  178. 2017-06-03 16:42:43 ★ coilover to the wheelhub. ((Richard Hawkins))
  179. 2017-06-03 16:43:12 ★ Richard Hawkins would then place the impact gun down and pockets the nuts as he'd then reach for the two
  180. 2017-06-03 16:43:49 ★ bolts, jerking them out of their slots as he'd then pocket the bolts and reaches for the ((Richard Hawkins))
  181. 2017-06-03 16:44:15 ★ coilover as he then jerks on it to get it out of its slot and places it down on the ground, ((Richard Hawkins))
  182. 2017-06-03 16:44:20 ★ next to the porsche. ((Richard Hawkins))
  183. 2017-06-03 22:30:56 ★ Richard Hawkins would then walk to the rear of the car, moving his hand to the hood latch, pushing on a
  184. 2017-06-03 22:31:14 ★ button as he then opens the hood( rear of the car ) ((Richard Hawkins))
  185. 2017-06-03 22:32:45 ★ Richard Hawkins would then bend down, leaning closer into the engine bay as he then inspects it,
  186. 2017-06-03 22:33:09 ★ locating the two nuts for the shock absorbers/coilovers as he'd then stand up and walks to ((Richard Hawkins))
  187. 2017-06-03 22:33:44 ★ his toolbox, crouching down to it as he then digs around for a 19mm wrench, grabbing ((Richard Hawkins))
  188. 2017-06-03 22:34:00 ★ ahold of it with his right hand as he then stands up and walks to the rear of the car, ((Richard Hawkins))
  189. 2017-06-03 22:34:20 ★ bending back down to the engine bay and starts to loosen up the nut for the right rear ((Richard Hawkins))
  190. 2017-06-03 22:35:04 ★ shockabsorber as he'd spin the wrench counter clockwise, removing the nut afterwards ((Richard Hawkins))
  191. 2017-06-03 22:35:30 ★ and moving to the rear left shocktower and starts to loosen up and remove the nut that holds ((Richard Hawkins))
  192. 2017-06-03 22:36:09 ★ the shockabsorber to the shocktower, loosening up and removing the nut, dropping the nut ((Richard Hawkins))
  193. 2017-06-03 22:36:34 ★ in his pocket as he then walks to the toolbox, throwing the 19mm wrench into the toolbox as ((Richard Hawkins))
  194. 2017-06-03 22:37:03 ★ he'd then walk to the left side of the car, bending down and picking up the impact gun with ((Richard Hawkins))
  195. 2017-06-03 22:37:37 ★ the 17mm socket on it, walking to the right rear wheelarch and crouches down as he'd then ((Richard Hawkins))
  196. 2017-06-03 22:38:45 ★ grab ahold of the shock absorber with his left hand and removes the bolt with his right hand ((Richard Hawkins))
  197. 2017-06-03 22:38:59 ★ as the shockabsorber would then be free. ((Richard Hawkins))
  198. 2017-06-03 22:39:29 ★ Richard Hawkins would then lower the shock absorber to the floor, resting it there and grabs ahold of the
  199. 2017-06-03 22:39:53 ★ impact gun with his right hand and walks over to the rear left wheelarch, lowering himself ((Richard Hawkins))
  200. 2017-06-03 22:43:47 ★ down to the wheelhub and uses the impact gun to loosen up the nut that holds on the bolt ((Richard Hawkins))
  201. 2017-06-03 22:43:59 ★ that holds the shock to the wheelhub . ((Richard Hawkins))
  202. 2017-06-03 22:44:16 ★ Richard Hawkins would then place the impact gun down on the lift and holds onto the shock absorber with
  203. 2017-06-03 22:48:02 ★ his left hand and removes the bolt with his right hand as he'd then pull the shock absorber ((Richard Hawkins))
  204. 2017-06-03 22:48:51 ★ out of the wheel well and places it down on the ground as he'd grab ahold of the impact gun ((Richard Hawkins))
  205. 2017-06-03 22:49:16 ★ again and stands up as he'd walk to the front left of the car, crouching down to the boxes ((Richard Hawkins))
  206. 2017-06-03 22:49:44 ★ with new coilovers, bolts and nuts. ((Richard Hawkins))
  207. 2017-06-03 22:50:25 ★ Richard Hawkins would then reach for the first coilover as he'd then turn to his right as he'd then
  208. 2017-06-03 22:50:52 ★ face the front right wheelhub, holding onto the new coilover with his left hand and onto ((Richard Hawkins))
  209. 2017-06-03 22:51:14 ★ new top washer and nut in his right hand as he'd then guide the coilover into the wheel well ((Richard Hawkins))
  210. 2017-06-03 22:51:39 ★ and guides the bolt on top, through the hole in the chassis as he'd then slide the new ((Richard Hawkins))
  211. 2017-06-03 22:52:05 ★ washer onto the bolt and spins on the nut, handtightening it so the coilover would stay on ((Richard Hawkins))
  212. 2017-06-03 22:52:10 ★ the car. ((Richard Hawkins))
  213. 2017-06-03 22:52:36 ★ Richard Hawkins would then reach for 2 new bolts and nuts as he'd then slide them into the slots on the
  214. 2017-06-03 22:53:08 ★ bottom of the coilover and handtightens the nuts to the bolts. ((Richard Hawkins))
  215. 2017-06-03 22:53:29 ★ Richard Hawkins would then reach for the socketwrench with the 17mm socket on it and starts to tighten up
  216. 2017-06-03 22:53:48 ★ all 3 nuts and bolts for the left front coilover. ((Richard Hawkins))
  217. 2017-06-03 22:57:10 ★ Richard Hawkins would then pocket the socketwrench and turns to his left to the boxes of coilovers and
  218. 2017-06-03 22:57:29 ★ reaches his left hand to the second front coilover that he's going to install to the front ((Richard Hawkins))
  219. 2017-06-03 22:57:36 ★ right of the car. ((Richard Hawkins))
  220. 2017-06-03 22:58:01 ★ Richard Hawkins would then grab the package of bolts and nuts needed for that installation and stands up,
  221. 2017-06-03 22:58:29 ★ making his way to the front right of the car, as he'd then reach his right hand into his ((Richard Hawkins))
  222. 2017-06-03 22:58:51 ★ pocket where the new washer and nut would be as he'd grab onto them . ((Richard Hawkins))
  223. 2017-06-03 22:59:16 ★ Richard Hawkins would then guide the coilover into the wheel well as he then guides the bolt through the
  224. 2017-06-03 22:59:40 ★ hole in the chassis as he'd then use his right hand to slide the washer and handtighten ((Richard Hawkins))
  225. 2017-06-03 23:00:00 ★ the nut to the top bolt of the coilover. ((Richard Hawkins))
  226. 2017-06-03 23:00:25 ★ Richard Hawkins would then crouch down, reaching his right hand into his pocket and taking out two
  227. 2017-06-03 23:00:47 ★ bolts and nuts as he'd then slide the bolts through the designated holes for them, securing ((Richard Hawkins))
  228. 2017-06-03 23:01:00 ★ the coilover to the wheelhub. ((Richard Hawkins))
  229. 2017-06-03 23:01:19 ★ Richard Hawkins would then handtighten the nuts onto the bolts as he'd then reach his right hand into his
  230. 2017-06-03 23:01:45 ★ pocket, grabbing ahold of the socket wrench and uses it to tighten all 3 nuts and bolts, ((Richard Hawkins))
  231. 2017-06-03 23:01:53 ★ securing the coilover to the car. ((Richard Hawkins))
  232. 2017-06-03 23:04:50 ★ Richard Hawkins would then walk around the car, back to the toolbox , dropping the 17mm wrench back in the
  233. 2017-06-03 23:05:04 ★ toolbox and reaches for the 19mm one, stuffint it in his pocket. ((Richard Hawkins))
  234. 2017-06-03 23:07:42 ★ Richard Hawkins would then reach into the box of coilovers, taking out one of the rear coilovers, inspecting
  235. 2017-06-03 23:08:20 ★ it and keeps it in his left hand as he reaches for the new bolt and nuts with his right hand ((Richard Hawkins))
  236. 2017-06-03 23:08:34 ★ taking the things to the rear left of the car. ((Richard Hawkins))
  237. 2017-06-03 23:09:03 ★ Richard Hawkins would then place the nuts down on the lift as he keeps the bolt in his hand, sliding the
  238. 2017-06-03 23:09:29 ★ coilover to the wheel well and guides the bolt slot on the end of the coilover to its ((Richard Hawkins))
  239. 2017-06-03 23:09:53 ★ spot and slides the bolt through the slot, securing the coilover to the rear wheelhub. ((Richard Hawkins))
  240. 2017-06-03 23:10:38 ★ Richard Hawkins would then handtighten the nut as he'd then walk to the front of the porsche again,
  241. 2017-06-03 23:11:04 ★ crouching down to the box which would now have only one more coilover in it and picks the ((Richard Hawkins))
  242. 2017-06-03 23:11:25 ★ coilover up with his left hand and grabs the bolt and nuts with his right hand, as he'd then ((Richard Hawkins))
  243. 2017-06-03 23:11:53 ★ stand up and walks over to the rear right of the car, sliding the coilover to the whee well, ((Richard Hawkins))
  244. 2017-06-03 23:12:15 ★ aligning the lower bolt holes as he'd then slide the bolt through the holes and releases the ((Richard Hawkins))
  245. 2017-06-03 23:12:46 ★ coilover as he then handtightens the nut to the bolt, securing the coilover to the wheelhub. ((Richard Hawkins))
  246. 2017-06-03 23:13:11 ★ Richard Hawkins would then walk to the rear of the car, reaching into the engine bay as he then slides the
  247. 2017-06-03 23:13:32 ★ washers over the top bolts of the coilover and spins on the nuts, handtightening both of ((Richard Hawkins))
  248. 2017-06-03 23:13:55 ★ the top nuts for the coilovers as he'd then reach into his pocket for the 19mm wrench and ((Richard Hawkins))
  249. 2017-06-03 23:14:18 ★ uses it to tighten the nuts , securing the coilovers to the chassis. ((Richard Hawkins))
  250. 2017-06-03 23:14:34 ★ Richard Hawkins would then walk to the rear left of the car, throwing the 19mm wrench into the toolbox and
  251. 2017-06-03 23:15:00 ★ picks up the impact gun that has the 17mm socket on it as he'd then use it to tighten the ((Richard Hawkins))
  252. 2017-06-03 23:15:20 ★ nut that connects to bolt that connects the coilover to the wheelhub. ((Richard Hawkins))
  253. 2017-06-03 23:15:38 ★ Richard Hawkins would then stand up and walks to the other side of the car, lowering himself down to the
  254. 2017-06-03 23:16:02 ★ wheelhub and uses the impact gun to tighten the same nut on that side of the car. ((Richard Hawkins))
  255. 2017-06-03 23:16:18 ★ Richard Hawkins would then walk to the toolbox, grabbing onto the 17 and 19mm wrenches as he'd
  256. 2017-06-03 23:16:33 ★ then go over the car, checking that all the bolts and nuts would the tight. ((Richard Hawkins))
  257. 2017-06-03 23:16:49 ★ Richard Hawkins would then drop the tools into the toolbox, pushing the toolbox away from the car.
  258.  
  259. Bodykit + putting on the wheels.
  260.  
  261. 2017-06-03 23:49:51 ★ Richard Hawkins would then walk to the shelf as he'd then grab onto an RWB front bumper for the porsche as
  262. 2017-06-03 23:50:23 ★ , bending * down and grabbing ahold of it with both his hands , carrying it over to the ((Richard Hawkins))
  263. 2017-06-03 23:50:27 ★ porsche. ((Richard Hawkins))
  264. 2017-06-03 23:50:58 ★ Richard Hawkins would then lower it to the front of the porsche as he'd then release it setting it down
  265. 2017-06-03 23:51:26 ★ gently, as he'd then walk to his toolbox, opening it and taking out a screwdriver that ((Richard Hawkins))
  266. 2017-06-03 23:51:37 ★ can fit a socket on the end of it. ((Richard Hawkins))
  267. 2017-06-03 23:51:55 ★ Richard Hawkins would hold the screwdriver in his right hand as he'd then reach for the 10mm socket with his
  268. 2017-06-03 23:52:17 ★ right hand and connects the socket to the screwdriver. ((Richard Hawkins))
  269. 2017-06-03 23:52:37 ★ Richard Hawkins would then walk to the car and crouches down to the front left wheel arch as he'd reach
  270. 2017-06-03 23:53:01 ★ into the wheel well and starts to loosen up the screws that hold the bumper to the wheel ((Richard Hawkins))
  271. 2017-06-03 23:53:21 ★ fender, loosening up and removing the screws, pocketing them into his right pocket. ((Richard Hawkins))
  272. 2017-06-03 23:54:29 ★ Richard Hawkins would then disconnect the wires from the left foglamp and indicator as he'd then walk
  273. 2017-06-03 23:54:54 ★ to the right of the car, lowering himself down, loosening up and taking off the same screws. ((Richard Hawkins))
  274. 2017-06-03 23:55:23 ★ Richard Hawkins would then disconnect the right sides foglamp and indicator aswell, as he'd then stand up
  275. 2017-06-03 23:56:07 ★ straight, walking to the front of his car and pockets the screwdriver as he'd then crouch ((Richard Hawkins))
  276. 2017-06-03 23:56:26 ★ down and moves his hands to the license plate, removing the license plate and ((Richard Hawkins))
  277. 2017-06-03 23:56:49 ★ places it down on the floor as he then takes his screwdriver again and uses it to ((Richard Hawkins))
  278. 2017-06-03 23:57:07 ★ undo the screws that hold the bumper to the crashbar. ((Richard Hawkins))
  279. 2017-06-03 23:57:55 ★ Richard Hawkins would then get on his knees and unscrews the 3 screws from under the hood of the car,
  280. 2017-06-03 23:58:49 ★ ( the hood would have been open already, check previous logs ) as he'd then pocket the ((Richard Hawkins))
  281. 2017-06-03 23:59:13 ★ screws and the screwdriver, grabbing onto the front bumper and slowly pulls it off of the ((Richard Hawkins))
  282. 2017-06-03 23:59:28 ★ car, making sure that he disconnected all the wires. ((Richard Hawkins))
  283. 2017-06-04 00:00:33 ★ Richard Hawkins would then stand up and carries the stock front bumper to the shelf in the garage and
  284. 2017-06-04 00:01:05 ★ crouches down as he'd then lower the front bumper gently to the floor, releasing it. ((Richard Hawkins))
  285. 2017-06-04 00:01:31 ★ Richard Hawkins would then stand up straight and tursn back to the car as he'd then walk to it, lowering
  286. 2017-06-04 00:02:23 ★ himself down to the front of the RWB bumper and picks it up with both his hands, gently ((Richard Hawkins))
  287. 2017-06-04 00:02:40 ★ moving to the porsche and attempts to fit the bumper to the porsche. ((Richard Hawkins))
  288. 2017-06-04 00:03:05 ★ Richard Hawkins would then move and wiggle the bumper around for some time to get the perfect fitment that
  289. 2017-06-04 00:03:56 ★ he is looking for as he'd then reach for the screws and the screwdriver, screwing in and ((Richard Hawkins))
  290. 2017-06-04 00:04:36 ★ tightening the top 3 screws that would be under the hood and the 2 screws that screw into ((Richard Hawkins))
  291. 2017-06-04 00:04:39 ★ the crash bar. ((Richard Hawkins))
  292. 2017-06-04 00:05:02 ★ Richard Hawkins would then stand up, looking at the wide line of the car, wide smile on his face, clearly
  293. 2017-06-04 00:05:21 ★ motivated to keep on working as he'd then walk to the side of the car, eyeing it. ((Richard Hawkins))
  294. 2017-06-04 00:06:38 ★ Richard Hawkins would then walk to the left front wheelarch and crouches down to it as he'd then
  295. 2017-06-04 00:07:01 ★ fit and tighten the screws within the wheel well as he'd then stand up and walks to the ((Richard Hawkins))
  296. 2017-06-04 00:07:20 ★ right side of the car, repeating the said action , making sure the screws are tight. ((Richard Hawkins))
  297. 2017-06-04 00:08:09 ★ Richard Hawkins would then walk to the shelf in the carage and picks up the wide front fender
  298. 2017-06-04 00:08:37 ★ for the porsche, carrying it on his two hands and sets it down on the left side of the ((Richard Hawkins))
  299. 2017-06-04 00:08:55 ★ porsche by lowering himself down with it, eyeing the fender and then the porsche. ((Richard Hawkins))
  300. 2017-06-04 00:10:13 ★ Richard Hawkins would then lower the fender gently to the ground and stands up, walking to the shelf in the
  301. 2017-06-04 00:10:46 ★ garage, picking up some masking tape and drillbits, carrying them over to the front left ((Richard Hawkins))
  302. 2017-06-04 00:11:17 ★ of the car as he'd then kneel down infront of the fender. ((Richard Hawkins))
  303. 2017-06-04 00:11:36 ★ Richard Hawkins would then place the drillbits down and starts pulling strips of maksing tape to the
  304. 2017-06-04 00:11:56 ★ fender so he could temporarily keep it against the car. ((Richard Hawkins))
  305. 2017-06-04 00:12:31 ★ Richard Hawkins would then place the tape down on the ground and reaches for the fender with both his hands,
  306. 2017-06-04 00:13:03 ★ lifting it against the fender of the car and uses his right hand to push the straps of ((Richard Hawkins))
  307. 2017-06-04 00:13:18 ★ tape against the car so the widebody fender would stay against the car. ((Richard Hawkins))
  308. 2017-06-04 00:15:03 ★ Richard Hawkins would then inspect the fender from outside and inside, moving it up or down to get to the
  309. 2017-06-04 00:15:24 ★ perfect fitment again. ((Richard Hawkins))
  310. 2017-06-04 00:15:54 ★ Richard Hawkins would then reach for the screwdriver and uses it to screw the fender to the bumper, assistin
  311. 2017-06-04 00:16:30 ★ -g him with the fitment as he'd then reach for the small drillbit, using the tip of the ((Richard Hawkins))
  312. 2017-06-04 00:16:51 ★ drillbit to make small marks in the paint of the car, showing him where he has to drill in ((Richard Hawkins))
  313. 2017-06-04 00:17:02 ★ to fit the widebody fender to the porsche. ((Richard Hawkins))
  314. 2017-06-04 00:17:26 ★ after he has marked all the drilling holes, he'd drop the drillbit and reaches for the screw ((Richard Hawkins))
  315. 2017-06-04 00:17:54 ★ driver and loosens up and removes the screw that holds the fender to the bumper. ((Richard Hawkins))
  316. 2017-06-04 00:18:18 ★ Richard Hawkins would then lift the fender off the car, gently lifting it up and pulling away so
  317. 2017-06-04 00:18:29 ★ the straps of tape wouldnt damage the paint. ((Richard Hawkins))
  318. 2017-06-04 00:18:57 ★ Richard Hawkins would then lower the fender down on the floor to his right and turns back to the fender of
  319. 2017-06-04 00:19:14 ★ the car, inspecting it as he'd make a line of cutting up in his mind. ((Richard Hawkins))
  320. 2017-06-04 00:21:36 ★ Richard Hawkins would then shake his head as he knows he only gets one shot at this as he'd push himself
  321. 2017-06-04 00:21:59 ★ up, making his way to the shelf in the garage and picks up his angle grinder. ((Richard Hawkins))
  322. 2017-06-04 00:23:46 ★ Richard Hawkins would then walk back to the porsche as he eyes it, walking to the lift as he'd then
  323. 2017-06-04 00:24:03 ★ plug the anglegrinder into the plug on the lift and turns it on. ((Richard Hawkins))
  324. 2017-06-04 00:24:26 ★ Richard Hawkins would then turn it off again, mumbling to himself as he'd lower himself down, placing the
  325. 2017-06-04 00:24:57 ★ angle grinder on the floor and reaches for the tape as he'd then tape up a guideline for ((Richard Hawkins))
  326. 2017-06-04 00:25:01 ★ himself to cut on. ((Richard Hawkins))
  327. 2017-06-04 00:25:27 ★ Richard Hawkins would then reach for the anglegrinder and uses it to the start cutting into the fender of
  328. 2017-06-04 00:25:57 ★ the porsche, cutting by his guideline, about 3-4 centimeters below the drillmarks ((Richard Hawkins))
  329. 2017-06-04 00:26:22 ★ Richard Hawkins would then cut the fender all the way as he'd then throw the hot fender piece out of his way
  330. 2017-06-04 00:26:38 ★ and uses the angle grinder to soften up the edges of the cut. ((Richard Hawkins))
  331. 2017-06-04 00:27:07 ★ Richard Hawkins would then use the angelgrinder to make the cut look more professional by fixing his
  332. 2017-06-04 00:27:24 ★ mistakes, leaving him with one cut fender. ((Richard Hawkins))
  333. 2017-06-04 00:29:57 ★ Richard Hawkins would then turn off the angle grinder and places it down to the ground as he'd then inspect
  334. 2017-06-04 00:30:21 ★ his job and stands up from the ground, walking over to the shelf once again, getting his ((Richard Hawkins))
  335. 2017-06-04 00:31:06 ★ cordless drill as he'd then carry it over to the porsche and lowers himself down again. ((Richard Hawkins))
  336. 2017-06-04 00:31:41 ★ Richard Hawkins would then place the drill on the ground and mves his hands under the widebody fender,
  337. 2017-06-04 00:32:04 ★ lifting it up to the fender of the car and using his right hand to press the straps of tape ((Richard Hawkins))
  338. 2017-06-04 00:32:13 ★ to the car. ((Richard Hawkins))
  339. 2017-06-04 00:32:36 ★ Richard Hawkins would then release the widebody fender and reaches for his screwdriver and the screw,
  340. 2017-06-04 00:32:56 ★ screwing the fender to the bumper as it'd correct his fitment a little. ((Richard Hawkins))
  341. 2017-06-04 00:33:18 ★ Richard Hawkins would then reach for the drill and a small drillbit, securing the drillbit to the drill as
  342. 2017-06-04 00:33:39 ★ he'd then use the drill to drill in small guide holes for the screws to go into as he'd ((Richard Hawkins))
  343. 2017-06-04 00:33:53 ★ then drill out all the holes for the left front fender. ((Richard Hawkins))
  344. 2017-06-04 00:34:38 ★ Richard Hawkins would then place the drill dwon to the ground and reaches for the screwdriver and
  345. 2017-06-04 00:35:01 ★ small package of self tapping screws that came with the bodykit as he'd then ((Richard Hawkins))
  346. 2017-06-04 00:35:27 ★ use the screws and screwdriver to secure the front fender to the car. ((Richard Hawkins))
  347. 2017-06-04 00:54:10 ★ Richard Hawkins would then place the tape down on the ground and moves his left hand under the fender and
  348. 2017-06-04 00:54:38 ★ lifts it slowly up, positioning it on the car as he'd then use his right hand to push straps ((Richard Hawkins))
  349. 2017-06-04 00:54:55 ★ of tape onto the car, securing the fender temporarily onto the car. ((Richard Hawkins))
  350. 2017-06-04 00:55:38 ★ Richard Hawkins would then reach for his screwdriver and a scre as he'd then screw the fender to the front
  351. 2017-06-04 00:56:09 ★ bumper, helping him to align the widebody fender. ((Richard Hawkins))
  352. 2017-06-04 00:56:40 ★ Richard Hawkins would then align the fender the way he wants, looking for the perfection as it'd take him
  353. 2017-06-04 00:57:02 ★ a good half an hour or more as he'd walk around the car, comparing and taking measurements ((Richard Hawkins))
  354. 2017-06-04 00:57:08 ★ from the fenders on each side. ((Richard Hawkins))
  355. 2017-06-04 00:57:44 ★ after having a perfect fitment, he'd then reach for the drill with his right hand and starts ((Richard Hawkins))
  356. 2017-06-04 00:58:15 ★ drilling holes into the designated areas on the fender of the porsche. ((Richard Hawkins))
  357. 2017-06-04 00:58:39 ★ Richard Hawkins would then place the drill down on the floor and reaches for his screwdriver and uses
  358. 2017-06-04 00:59:00 ★ it to loosen up and remove a screw that holds the widebody fender to the front bumper. ((Richard Hawkins))
  359. 2017-06-04 00:59:18 ★ Richard Hawkins would then move his hands under the widebod fender, slowly and gently removing it from the
  360. 2017-06-04 00:59:31 ★ car, lowering it down to the floor to his left. ((Richard Hawkins))
  361. 2017-06-04 01:09:01 ★ Richard Hawkins would then reach for the roll of tape and starts to make a guideline for himself again,
  362. 2017-06-04 01:09:21 ★ taking his time with it as he'd then place the tape down on the lift and reaches for the ((Richard Hawkins))
  363. 2017-06-04 01:09:25 ★ angle grinder. ((Richard Hawkins))
  364. 2017-06-04 01:16:34 ★ Richard Hawkins would then get on his knees and turns on the angle grinder slowly starting to cut into the
  365. 2017-06-04 01:17:03 ★ right fender of the car, making his way down then line he has marked for himself. ((Richard Hawkins))
  366. 2017-06-04 01:18:06 ★ Richard Hawkins would then eventually cut the fender out, quickly pushing the cut metal sheet away from
  367. 2017-06-04 01:20:31 ★ himself and starts to smooth out the edges of the fender, making his work look more ((Richard Hawkins))
  368. 2017-06-04 01:21:10 ★ professional as he'd take his damn time with that. ((Richard Hawkins))
  369. 2017-06-04 01:22:46 ★ Richard Hawkins would then place the angle grinder down on the ground and reaches for the fender
  370. 2017-06-04 01:27:34 ★ as he'd then reach under the widebody fender, lifting it up and slowly bringing it closer ((Richard Hawkins))
  371. 2017-06-04 01:27:59 ★ to the fender of the car, using his right hand to push the tape back onto the car and ((Richard Hawkins))
  372. 2017-06-04 01:28:21 ★ does so with all the straps of tape, securing the fender temporarily on the car. ((Richard Hawkins))
  373. 2017-06-04 01:28:55 ★ Richard Hawkins would then reach for his screwdriver and the screw, to then secure the fender to the front
  374. 2017-06-04 01:29:08 ★ bumper as it'd help him with alignment. ((Richard Hawkins))
  375. 2017-06-04 01:29:40 ★ Richard Hawkins would then reach for the self tapping screws as he'd then start to screw the fender to the
  376. 2017-06-04 01:29:54 ★ car, securing it in place and removing the straps of tape afterwards. ((Richard Hawkins))
  377. 2017-06-04 02:30:54 ★ Richard Hawkins would then grab his screwdriver as he'd walk to the rear of the car, as he'd then unplug
  378. 2017-06-04 02:31:41
  379. 2017-06-04 02:34:06 ★ the right rear taillight and does the same with the left taillight as he'd then reach for ((Richard Hawkins))
  380. 2017-06-04 02:34:43 ★ his screwdriver and starts to loosen up and remove the nuts that hold the taillight in place ((Richard Hawkins))
  381. 2017-06-04 02:35:06 ★ as he'd then collect the nuts in his pocket and moves to the right taillight, removing that ((Richard Hawkins))
  382. 2017-06-04 02:35:24 ★ aswell as it'd get him to gain access to couple of screws to take off the rear bumper. ((Richard Hawkins))
  383. 2017-06-04 02:37:57 ★ Richard Hawkins would then place the taillights onto the engine as he'd then use the screwdriver to then
  384. 2017-06-04 02:38:25 ★ remove the screws from the engine bay and from under the lights as it'd then release the ((Richard Hawkins))
  385. 2017-06-04 02:38:29 ★ rear bumper. ((Richard Hawkins))
  386. 2017-06-04 02:40:24 ★ Richard Hawkins would then pocket the screwdrivers and the nuts and screws as he'd then grab ahold of the
  387. 2017-06-04 02:40:54 ★ rear bumper and pulls on it as well as wiggling it to release it from the car. ((Richard Hawkins))
  388. 2017-06-04 02:43:08 ★ Richard Hawkins would then carry the rear bumper on his hands, carrying it to the shelf in the garage
  389. 2017-06-04 02:43:22 ★ as he'd then get on his toes and lifts the bumper up onto the shelf. ((Richard Hawkins))
  390. 2017-06-04 02:43:54 ★ Richard Hawkins would then crouch down and grabs ahold of the rear bumper with both his hands as
  391. 2017-06-04 02:44:36 ★ he'd then lift it gently up from the ground, not to scrape it as he'd then carry it over ((Richard Hawkins))
  392. 2017-06-04 02:45:01 ★ to the rear of the porsche, crouching down and starts to fit the rear bumper, moving and ((Richard Hawkins))
  393. 2017-06-04 02:45:32 ★ fitting it the way he wants as he'd then reach for couple of screws, screwing the rear ((Richard Hawkins))
  394. 2017-06-04 02:46:21 ★ bumper from two places so it wouldn't shift as he'd then tighten up all the other screws ((Richard Hawkins))
  395. 2017-06-04 02:46:34 ★ aswell to have the perfect fitment on the rear bumper. ((Richard Hawkins))
  396. 2017-06-04 02:49:40 ★ Richard Hawkins would then eye the bumper, inspecting the lines so they'd be perfect, if nto, he'd
  397. 2017-06-04 02:50:06 ★ loosen the bumper up from the screws, fitting it a little better till he gets it the way ((Richard Hawkins))
  398. 2017-06-04 02:50:09 ★ he wants it. ((Richard Hawkins))
  399. 2017-06-04 02:50:56 ★ Richard Hawkins would then pocket the screwdriver and stands up, making his way to the shelves as he'd then
  400. 2017-06-04 02:51:37 ★ crouch down and picks up the rear right fender, carrying it to the car, lowering himself on ((Richard Hawkins))
  401. 2017-06-04 02:52:10 ★ his knees as he'd then lower the fender down on the ground, reaching for the tape as ((Richard Hawkins))
  402. 2017-06-04 02:52:33 ★ he'd then pull straps of tape onto the fender so he could attach it temporarily to the ((Richard Hawkins))
  403. 2017-06-04 02:52:39 ★ porsche. ((Richard Hawkins))
  404. 2017-06-04 02:53:01 ★ Richard Hawkins would then reach for the fender, gently lifting it up and moves it to the rear right fender
  405. 2017-06-04 02:53:29 ★ of the car and aligns it with the bumper as he'd then use his right hand to push the tape ((Richard Hawkins))
  406. 2017-06-04 02:53:43 ★ onto the car, sticking the fendere temporarily to the car. ((Richard Hawkins))
  407. 2017-06-04 02:56:56 ★ Richard Hawkins would then reach into his pocket, withdrawing a screw and a screwdriver as he'd then start
  408. 2017-06-04 02:57:19 ★ to screw the fender to the rear bumper, giving him much better alignment on the fender as ((Richard Hawkins))
  409. 2017-06-04 02:58:21 ★ he'd then aling the fender the way he wants, reaching his right hand behind him as he'd grab ((Richard Hawkins))
  410. 2017-06-04 02:59:41 ★ onto the drill and uses the drill to then drill in the holes for the screws to go into the ((Richard Hawkins))
  411. 2017-06-04 03:00:09 ★ fenders as he'd then place the drill down on the ground and reaches for his screwdriver and ((Richard Hawkins))
  412. 2017-06-04 03:00:31 ★ starts to undo the screw from fender to bumper, pocketing the screwdriver and the screw. ((Richard Hawkins))
  413. 2017-06-04 03:00:51 ★ Richard Hawkins would then reach for the fender with both his hands, pulling the fender off his car and
  414. 2017-06-04 03:01:09 ★ lowers it down on the floor, being rather careful not to damage the fender. ((Richard Hawkins))
  415. 2017-06-04 03:01:43 ★ Richard Hawkins would then reach for the roll of tape as he'd then start to tape off the guidelines for him
  416. 2017-06-04 03:04:50 ★ to use for cutting as he'd then place the tape down, reaching for the angle grinder and ((Richard Hawkins))
  417. 2017-06-04 03:05:20 ★ starts to cut by the guideline he made for himself as he'd keep on following the line ((Richard Hawkins))
  418. 2017-06-04 03:05:48 ★ eventually pushing the piece of metal away from himself and starts to finish his line, ((Richard Hawkins))
  419. 2017-06-04 03:06:01 ★ making it smooth and look somewhat professiona. ((Richard Hawkins))
  420. 2017-06-04 03:15:24 ★ Richard Hawkins would then stop when he has trimmed the fender to look like the way he wants as he'd then
  421. 2017-06-04 03:18:35 ★ place down the angle grinder , reaching for the fender again and lifts it to its place and ((Richard Hawkins))
  422. 2017-06-04 03:19:05 ★ uses the straps of tape to keep in in place as he'd then screw on the screw that connects ((Richard Hawkins))
  423. 2017-06-04 03:19:18 ★ the bumper to the fender . ((Richard Hawkins))
  424. 2017-06-04 03:19:42 ★ Richard Hawkins would then reach into his pocket for the self tapping screws and screws the fender to his
  425. 2017-06-04 03:20:06 ★ car as he'd then eye it and reaches for his tools, picking them up and carrying them over to ((Richard Hawkins))
  426. 2017-06-04 03:20:10 ★ the left of the car. ((Richard Hawkins))
  427. 2017-06-04 03:23:30 ★ Richard Hawkins would then lower the tools down on the ground, the look in his eyes is tired as he sets his
  428. 2017-06-04 03:23:40 ★ tools down and looks at the car. ((Richard Hawkins))
  429. 2017-06-04 03:27:37 ★ Richard Hawkins would then stand up and walks over to the shelf in the garage as he then lowers himself
  430. 2017-06-04 03:28:01 ★ down to then move his hands under the fender and lifts it up as he'd then carry it to the ((Richard Hawkins))
  431. 2017-06-04 03:28:26 ★ porsche, lowering it down next to it as he'd then kneel down and reaches ((Richard Hawkins))
  432. 2017-06-04 03:28:39 ★ for the tape and pulls straps of tape over the fender lining. ((Richard Hawkins))
  433. 2017-06-04 03:29:06 ★ Richard Hawkins would then reach for the fender and lifts it up against the car as he 'd then use his right
  434. 2017-06-04 03:29:28 ★ hand to push the tape against the fender, securing the fender against the car. ((Richard Hawkins))
  435. 2017-06-04 03:30:10 ★ Richard Hawkins would then reach for the screwdriver and screws the fender to the rear bumper as it'd
  436. 2017-06-04 03:30:16 ★ helo him align the fender. ((Richard Hawkins))
  437. 2017-06-04 03:30:38 ★ Richard Hawkins would take his time to fit the fender the same as it is on the other side, taking
  438. 2017-06-04 03:30:52 ★ measurements and fitting it to get it perfect. ((Richard Hawkins))
  439. 2017-06-04 03:31:18 ★ Richard Hawkins would then reach for the drill as he then starts to drill out holes for the bodykit.
  440. 2017-06-04 03:31:39 ★ Richard Hawkins would then set the drill down and reaches for his screwdriver as he'd then use it to t
  441. 2017-06-04 03:32:04 ★ remove the screw from the fender and rear bumper as he'd then pocket the screwdriver, and ((Richard Hawkins))
  442. 2017-06-04 03:32:16 ★ carefully pulls the fender away from the porsche. ((Richard Hawkins))
  443. 2017-06-04 03:32:50 ★ Richard Hawkins would then set the fender down on its side as he'd then reach for the tape and starts settin
  444. 2017-06-04 03:33:11 ★ -g up the guideline for him to cut by as he'd then st the tape down and ((Richard Hawkins))
  445. 2017-06-04 03:33:35 ★ picks up the angle grinder and starts cutting out the fender taking his time with it to make ((Richard Hawkins))
  446. 2017-06-04 03:33:39 ★ a smooth cut. ((Richard Hawkins))
  447. 2017-06-04 03:35:01 ★ Richard Hawkins would then push the cut piece away from himself as he'd then start to smoothe out the
  448. 2017-06-04 03:35:14 ★ edge, making it round and good, just the way as others. ((Richard Hawkins))
  449. 2017-06-04 03:36:12 ★ Richard Hawkins would then set the angle grinder down and reaches for the widefender and lifts it up with
  450. 2017-06-04 03:36:35 ★ his both hands again as he'd then push the tapes onto the car, holding the fender up. ((Richard Hawkins))
  451. 2017-06-04 03:36:53 ★ Richard Hawkins would then reach for his screwdriver and screws the fender to the bumper and
  452. 2017-06-04 03:37:12 ★ starts screwing in the self tapping screws that came with the bodykit as it'd ((Richard Hawkins))
  453. 2017-06-04 03:37:20 ★ secure the fender to the car. ((Richard Hawkins))
  454. 2017-06-04 03:38:00 ★ Richard Hawkins would then sight and eyes his work as he'd then push himself up from the ground and walks
  455. 2017-06-04 03:38:26 ★ to the shelf in the garage as he'd then bend down and picks up the left sideskirt and ((Richard Hawkins))
  456. 2017-06-04 03:38:34 ★ carries it over to the car. ((Richard Hawkins))
  457. 2017-06-04 03:39:20 ★ Richard Hawkins would then lower himself on his knees as he'd then pull straps of tape on the sideskirt.
  458. 2017-06-04 03:39:51 ★ Richard Hawkins would then grab the sideskirt with both his hands and moves it over to its place as he'd
  459. 2017-06-04 03:39:59 ★ then secure it in place by tape. ((Richard Hawkins))
  460. 2017-06-04 03:40:37 ★ Richard Hawkins would then reach for his screwdriver and screws the sideskirt to the front fender and
  461. 2017-06-04 03:40:50 ★ mving to the rear afterwards, securing the sideskirt to the rear fender. ((Richard Hawkins))
  462. 2017-06-04 03:41:13 ★ Richard Hawkins would then reach for the drill as he'd then drill in the holes that would secure the
  463. 2017-06-04 03:41:18 ★ sideskirt to the car. ((Richard Hawkins))
  464. 2017-06-04 03:41:41 ★ after that he'd lower the drill to the floor and reaches for the screwdriver and starts ((Richard Hawkins))
  465. 2017-06-04 03:41:51 ★ screwing in the self tapping screws. ((Richard Hawkins))
  466. 2017-06-04 03:42:35 ★ Richard Hawkins would then sigh and collects his tools to then make his way to the other side of the car,
  467. 2017-06-04 03:42:59 ★ placing the tools down and walks over to the shelf in the garage, picking up the right ((Richard Hawkins))
  468. 2017-06-04 03:43:22 ★ sideksirt with both his hands as he'd then carry it over to the porsche and lowers ((Richard Hawkins))
  469. 2017-06-04 03:43:44 ★ himself down on his knees and lowers the sideskirt to the floor. ((Richard Hawkins))
  470. 2017-06-04 03:44:10 ★ Richard Hawkins would then reach for the tape and pulls straps of tape onto the sideskirt as he'd then lift
  471. 2017-06-04 03:44:42 ★ the sideskirt to about to its position as he'd then reach for the screwdriver, securing the ((Richard Hawkins))
  472. 2017-06-04 03:44:49 ★ sideskirt to the front and rear fender. ((Richard Hawkins))
  473. 2017-06-04 03:45:11 ★ Richard Hawkins would then reach for his drill as he'd then start to drill in holse for the sideskirt to
  474. 2017-06-04 03:45:15 ★ attach on the car. ((Richard Hawkins))
  475. 2017-06-04 03:45:47 ★ Richard Hawkins would then place the drill down and reaches for his screwdriver and screws in
  476. 2017-06-04 03:45:58 ★ the self tapping screws to hold the sideskirt against the car. ((Richard Hawkins))
  477. 2017-06-04 03:46:46 ★ Richard Hawkins would then push himself up from the ground eyeing the car as he'd then keep his screwdriver
  478. 2017-06-04 03:46:53 ★ handy and walks to the rear of the car. ((Richard Hawkins))
  479. 2017-06-04 03:47:52 ★ Richard Hawkins would then kneel down and reaches under the trunk as he starts to loosen up and remove
  480. 2017-06-04 03:48:08 ★ the bolts that hold the wing in place, pocketing the screws. ((Richard Hawkins))
  481. 2017-06-04 03:48:34 ★ Richard Hawkins would then pocket the screwdriver and stands up as he'd reach for the small stock wing/lip
  482. 2017-06-04 03:48:51 ★ with both his hands and carries it over to the shelf in the garage. ((Richard Hawkins))
  483. 2017-06-04 03:49:18 ★ Richard Hawkins would then reach for the big RWB GT wing and carries it over to the rear of the car as he'd
  484. 2017-06-04 03:49:26 ★ then set it on the place where old one was. ((Richard Hawkins))
  485. 2017-06-04 03:49:49 ★ Richard Hawkins would then keep it there with his left hand as he'd use his right hand to then handtighten
  486. 2017-06-04 03:50:16 ★ the nuts , somewhat securing it to the trunk. ((Richard Hawkins))
  487. 2017-06-04 03:50:37 ★ Richard Hawkins would then use his screwdriver with the 10mm socket on it to secure the wing
  488. 2017-06-04 03:50:43 ★ to the trunk. ((Richard Hawkins))
  489. 2017-06-04 03:51:08 ★ Richard Hawkins would tighten all the screws and keeps the trunk up as he 'd lean into there and
  490. 2017-06-04 03:51:32 ★ sets the rear lights into their positions, using the screwdriver to tighten the nuts , ((Richard Hawkins))
  491. 2017-06-04 03:51:45 ★ securing them in place and connects the wires to the rear lights. ((Richard Hawkins))
  492. 2017-06-04 03:52:16 ★ Richard Hawkins would then shut the trunk, eyeing the car as he'd then walk to his toolbox and takes the
  493. 2017-06-04 03:52:27 ★ cordless impact gun and a 21mm socket. ((Richard Hawkins))
  494. 2017-06-04 03:53:01 ★ Richard Hawkins would then place the impact gun on the left side of the lift as he'dthen stand up and walks
  495. 2017-06-04 03:53:23 ★ over to the shelf as he'd then grab the two wheels that are leaning against the wall, gettin ((Richard Hawkins))
  496. 2017-06-04 03:53:45 ★ them upright and rolls them over to the left side of the car, one wheel clearly wider than ((Richard Hawkins))
  497. 2017-06-04 03:53:49 ★ the other one. ((Richard Hawkins))
  498. 2017-06-04 03:54:13 ★ Richard Hawkins would then leave the skinnier wheel to the front and rolls the wider one to the rear as he'd
  499. 2017-06-04 03:54:28 ★ then lift the rim up with both his hands, placing his ((Richard Hawkins))
  500. 2017-06-04 03:55:06 ★ pushing the rim to the wheelhub as he'd then keep it there with his left hand, reaching ((Richard Hawkins))
  501. 2017-06-04 03:55:22 ★ into his pocket to grab onto some new shiny lugnuts, handtightening them ((Richard Hawkins))
  502. 2017-06-04 03:55:39 ★ as he'd then reach for the impact gun and uses it to tighten the wheels to the car. ((Richard Hawkins))
  503. 2017-06-04 03:55:49 ★ by tightening the lugnuts. ((Richard Hawkins))
  504. 2017-06-04 03:56:09 ★ Richard Hawkins would then walk to the front of the car, reaching for the wheel and lifting it up onto the
  505. 2017-06-04 03:56:25 ★ wheelhub as he'd then grab onto some new lugnuts, handtightening them and ((Richard Hawkins))
  506. 2017-06-04 03:56:39 ★ doing the final tighening with the impact gun. ((Richard Hawkins))
  507. 2017-06-04 03:57:00 ★ Richard Hawkins would then walk to the right side of the car, lowering the impact gun dwon and
  508. 2017-06-04 03:57:21 ★ walks to the shelf in the garage as he'd then roll another pair of wheels to the porsche, ((Richard Hawkins))
  509. 2017-06-04 03:58:04 ★ leaving the skinnier one one infront and crouches down to the rear wheel, grabbing ahold of ((Richard Hawkins))
  510. 2017-06-04 03:58:26 ★ it with both his hands and lifitng it to the wheelhub, reaching into his pocket for some l ((Richard Hawkins))
  511. 2017-06-04 03:58:54 ★ lugnuts, handtightening them and uses the impact gun to do the final tightening. ((Richard Hawkins))
  512. 2017-06-04 03:59:14 ★ Richard Hawkins would then walk to the front of the car and crouches down to the rim and grabs it with both
  513. 2017-06-04 03:59:38 ★ his hands and litfts it to the wheelhub, reaching into his pockets for some lugnuts, ((Richard Hawkins))
  514. 2017-06-04 03:59:59 ★ handtightening them and does the final tightening with the impact gun. ((Richard Hawkins))
  515. 2017-06-04 04:00:20 ★ Richard Hawkins would then reach for the tape and starts taping up all the lines between the car and the
  516. 2017-06-04 04:00:29 ★ bodykit as he'd then go all around the car. ((Richard Hawkins))
  517. 2017-06-04 04:00:47 ★ Richard Hawkins would then walk to the shelf for the silicone pistol and tube of silicone as he'd then
  518. 2017-06-04 04:01:32 ★ make his way back to the porsche, starting to apply silicone to the line inbetween the car ((Richard Hawkins))
  519. 2017-06-04 04:02:04 ★ and the bodykit as he'd then wet his indexfinger with his saliva and pulls it over the ((Richard Hawkins))
  520. 2017-06-04 04:02:44 ★ silicone, pulling a sick even line like old man Nakai himself. ((Richard Hawkins))
  521. 2017-06-04 04:03:08 ★ after doing so , he'd let the silicone dry for an hour and pulls of the tape from the ((Richard Hawkins))
  522. 2017-06-04 04:03:10 ★ fenders. ((Richard Hawkins))
Add Comment
Please, Sign In to add comment