Volvo's Calipers, Discs and pads

2016-01-09 21:15:03  ★ Richard Hawkins would kick his feet into the motion as he would then start to make his way towards the
2016-01-09 21:16:27  ★ wall of the garage as he would then bend down to his toolbox and grabs ahold of the      ((Richard Hawkins))
2016-01-09 21:16:57  ★ toolbox handles with his right hand and straightens his back as he would then kick his feet      ((Richard Hawkins))
2016-01-09 21:17:20  ★ into the motion as he walks back to the Volvo's front wheel.      ((Richard Hawkins))
2016-01-09 21:19:41  ★ Richard Hawkins woul d then place the toolbox down next to the Volvo  as he would then crouch down to the
2016-01-09 21:19:45  ★ toolbox.      ((Richard Hawkins))
2016-01-09 22:43:44  ★ Richard Hawkins crouches down to the toolbox as he would then reach out for the breaker bar with his right
2016-01-09 22:44:10  ★ hand and for a 17mm socket with his left hand and brings the two together as he connects      ((Richard Hawkins))
2016-01-09 22:44:18  ★ the socket to the breaker bar.      ((Richard Hawkins))
2016-01-09 22:46:06  ★ Richard Hawkins would then  move the breaker bar to the Volvo's wheel and loosnes all 4 bolts with the break
2016-01-09 22:46:25  ★ breaker bar, spinning it counter clockwise.      ((Richard Hawkins))
2016-01-09 22:47:13  ★ Richard Hawkins would then place the breaker bar dpwm next to the Volvo as he would then stand up and kicks
2016-01-09 22:47:28  ★ his feet into motion and walks towards the end of the lift.      ((Richard Hawkins))
2016-01-09 22:48:01  ★ Richard Hawkins would then bend down to some plastic pads as he would then walk around the car and slides
2016-01-09 22:48:16  ★ one of the plastic pads under the each end of the sideskirts.      ((Richard Hawkins))
2016-01-09 22:48:42  ★ Richard Hawkins would then walk over to the elevators control panel as he would then press on a button with
2016-01-09 22:48:58  ★ his index finger and raises the middle part of the lift.      ((Richard Hawkins))
2016-01-09 22:49:26  ★ Richard Hawkins would take his finger off the button as soon as the wheels are off the ground.
2016-01-09 22:54:02  ★ Richard Hawkins would then walk over to the front of the volvo as he would then crouch down and removes the
2016-01-09 22:54:48  ★ wheelnuts with his right hand and tucks them into his pants pockets.      ((Richard Hawkins))
2016-01-09 22:55:41  ★ Richard Hawkins would then grab ahold of the rim with both of his hands as he would then lift it away from
2016-01-09 22:56:11  ★ the wheelhub and lowers it down onto the ground and rolls it to the garage wall and tilts it      ((Richard Hawkins))
2016-01-09 22:56:18  ★ so it would rest against the garage wall.      ((Richard Hawkins))
2016-01-09 22:58:14  ★ Richard Hawkins would then walk back to the front wheel as he would then crouch down to the wheelhub
2016-01-09 23:01:02  ★ Richard Hawkins would then reach into the toolbox as he would then grab ahold of the socket wrench.
2016-01-09 23:01:33  ★ Richard Hawkins would then use his index finger and thumb to grab a 13mm socket.
2016-01-09 23:02:05  ★ Richard Hawkins would then lean into the wheelhub as he would then place the 13mm socket onto one of the 2
2016-01-09 23:02:33  ★ bolts , holding the brake caliper in place.      ((Richard Hawkins))
2016-01-09 23:02:54  ★ Richard Hawkins would then lift the socket wrench over to the socket as he would then apply pressure on it,
2016-01-09 23:03:19  ★ connection the socket to the socket wrench.      ((Richard Hawkins))
2016-01-09 23:03:54  ★ Richard Hawkins would then loosen and remove two bolts as he would then place the bolts into his right
2016-01-09 23:04:10  ★ pocket and places the socket wrench down onto the lift afterwards.      ((Richard Hawkins))
2016-01-09 23:04:46  ★ Richard Hawkins would then move one of his hands to the back of the caliper as he would then pull on it
2016-01-09 23:05:26  ★ , making the calipers cylinder to move in and loosen up the brake pads and the caliper itsel      ((Richard Hawkins))
2016-01-09 23:06:15  ★ Richard Hawkins would then remove the caliper from its location and rests it ontop of the brake disc.
2016-01-09 23:06:46  ★ Richard Hawkins would then turn towards the toolbox and searches a brakeline clamp as he would then find
2016-01-09 23:06:51  ★ it and grabs ahold of iy.      ((Richard Hawkins))
2016-01-09 23:08:15  ★ Richard Hawkins would then move the clamp up to the brake line as he would then apply pressure on it and
2016-01-09 23:09:24  ★ closes the brakeline.      ((Richard Hawkins))
2016-01-09 23:09:40  ★ Richard Hawkins would then let go of the clamp as it would then hang on the brake line.
2016-01-09 23:10:07  ★ Richard Hawkins would then start to twist the brake caliper counter clockwise as he keeps ahold of the
2016-01-09 23:10:15  ★ brakeline with his left hand.      ((Richard Hawkins))
2016-01-09 23:10:58  ★ Richard Hawkins would keep on rotating the brake caliper counter clockwise aslong as it get separated from
2016-01-09 23:11:06  ★ the brakeline.      ((Richard Hawkins))
2016-01-09 23:11:36  ★ Richard Hawkins would then lift the brake caliper to the side as he would then lower it down onto the
2016-01-09 23:11:38  ★ lift.      ((Richard Hawkins))
2016-01-09 23:12:06  ★ Richard Hawkins would then move his hands to the wheelhub as he would hten remove the brake pads
2016-01-09 23:12:13  ★ and throws them to the side.      ((Richard Hawkins))
2016-01-09 23:12:53  ★ Richard Hawkins would then stand up as he would then kick his feet into motion and walks over to the shelf.
2016-01-09 23:13:42  ★ Richard Hawkins would then grab ahold of one of the boxes which have  brembo written on them
2016-01-09 23:14:03  ★ Richard Hawkins would grab ahold of the big box with both of his hands and walks back over to the car as he
2016-01-09 23:14:17  ★ would lower the box down infront of the car.      ((Richard Hawkins))
2016-01-09 23:14:45  ★ Richard Hawkins would then walk over to the toolbox as he takes a casual look at the wheelhub and notices
2016-01-09 23:14:54  ★ that the brake disc is still there.      ((Richard Hawkins))
2016-01-09 23:15:09  ★ Richard Hawkins would then let out a slight chuckle and a sigh afterwards.
2016-01-09 23:15:37  ★ Richard Hawkins would then crouch down as he would the reach into the toolbox and grabs ahold of the philips
2016-01-09 23:15:43  ★ headed screwdriver.      ((Richard Hawkins))
2016-01-09 23:17:13  ★ Richard Hawkins would then move the screwdriver to the wheelhub as he would then start to remove two screwes
2016-01-09 23:17:43  ★ by spinning the screwdriver counter clockwise..      ((Richard Hawkins))
2016-01-09 23:18:26  ★ after he has loosened the screwes he would then place the screwedriver to the side and rests      ((Richard Hawkins))
2016-01-09 23:18:34  ★ it down onto the lift.      ((Richard Hawkins))
2016-01-09 23:19:20  ★ Richard Hawkins would then grab ahold of the brake disc as he would then pull it away from the wheelhub as
2016-01-09 23:19:33  ★ he would lwoer it down onto the ground .      ((Richard Hawkins))
2016-01-09 23:21:00  ★ Richard Hawkins would then turn himself over towards the cardboard box as he would then reach for it with
2016-01-09 23:21:13  ★ his left hand and pulls it towards himself.      ((Richard Hawkins))
2016-01-09 23:23:53  ★ Richard Hawkins would then reach into the box as he would curl his fingers around the middle of the brembo
2016-01-09 23:24:04  ★ brake disc and lifts it out of the box.      ((Richard Hawkins))
2016-01-09 23:27:12  ★ Richard Hawkins would then rip open the plastic around the brake disc.
2016-01-09 23:28:19  ★ Richard Hawkins would then place the brembo brake disc onto the wheelhub as he would then spin it a little
2016-01-09 23:28:32  ★ as he aligns the screw holes.      ((Richard Hawkins))
2016-01-09 23:29:57  ★ Richard Hawkins would then let go of the Brake disc as he would then reach for the screwdriver with
2016-01-09 23:30:33  ★ his right hand and two screwes with his left hand.      ((Richard Hawkins))
2016-01-09 23:30:52  ★ Richard Hawkins would slide the screws into the holes as he would then tighten them with the screwdriver.
2016-01-09 23:34:23  ★ Richard Hawkins would then place the screwdriver back down as he would then reach into the box and
2016-01-09 23:35:08  ★ grabs ahold of the Brembo brake caliper and brake pads.      ((Richard Hawkins))
2016-01-09 23:36:16  ★ Richard Hawkins would then place the brake pads down onto the lift.
2016-01-09 23:36:41  ★ Richard Hawkins would then grab ahold of the brakeline as he would then start to twist the endo of it into
2016-01-09 23:36:47  ★ the brake caliper.      ((Richard Hawkins))
2016-01-09 23:37:08  ★ Richard Hawkins would then twist the brake caliper clockwise as he tightens the brakeline.
2016-01-09 23:38:37  ★ Richard Hawkins would then place the brake caliper on its position as he holds it in place with his right
2016-01-09 23:40:08  ★ hand and reaches down into his pocket with his left hand as he grabs ahold of the two      ((Richard Hawkins))
2016-01-09 23:40:10  ★ bolts      ((Richard Hawkins))
2016-01-09 23:41:32  ★ Richard Hawkins would then slide the bolts into the holes as he would then tighten them by hand.
2016-01-09 23:41:58  ★ Richard Hawkins would then let go fo the caliper as he would then reach for the socket wrench with the 13mm
2016-01-09 23:42:17  ★ socket and uses it to tighten both two bolts as hard as he can.      ((Richard Hawkins))
2016-01-09 23:43:26  ★ Richard Hawkins would then place the socket wrench back down as he reaches for the brake pads.
2016-01-09 23:44:23  ★ Richard Hawkins would rip open the plastic around the brake pads and places the pads into the caliper as he
2016-01-09 23:45:10  ★ would then lower the top part of the caliper and reaches into his pocket, taking out a 13mm      ((Richard Hawkins))
2016-01-09 23:45:36  ★ bolt from there and slides it into the place as he would then reach for the socket wrench an      ((Richard Hawkins))
2016-01-09 23:45:49  ★ tightens the bolt as hard as he can.      ((Richard Hawkins))
2016-01-09 23:47:13  ★ Richard Hawkins would then check all the nuts and bolts once again as he would then  place the socket wrench
2016-01-09 23:47:16  ★ down.      ((Richard Hawkins))
2016-01-09 23:47:51  ★ Richard Hawkins would then reach into the toolbox and grabs ahold of the 8mm wrench.
2016-01-09 23:48:23  ★ Richard Hawkins would then remove the rubbery cover from the bleeding nut from the brake caliper.
2016-01-09 23:49:21  ★ Richard Hawkins would then place a rubbery see-through line onto the bleed screw.
2016-01-09 23:50:07  ★ Richard Hawkins would then place the other end into the bottle of used brake fluid.
2016-01-09 23:50:47  ★ Richard Hawkins would then stand up as he would then reach for the door handle of the volvo and pulls on it,
2016-01-09 23:50:51  ★ opening the door.      ((Richard Hawkins))
2016-01-09 23:51:23  ★ Richard Hawkins would then bend down as he then pulls on the lever, popping up the hood a little.
2016-01-09 23:51:46  ★ Richard Hawkins would then walk over to the front of the car as he would then slide his fingers under the
2016-01-09 23:51:54  ★ hood and lifts it up.      ((Richard Hawkins))
2016-01-09 23:52:29  ★ Richard Hawkins would then reach for the brake fluid reservoir cap and twists it off.
2016-01-09 23:52:48  ★ Richard Hawkins would then walk over to the shelf as he grabs ahold of the brake fluid bottle.
2016-01-09 23:53:15  ★ Richard Hawkins would then walk back to the front of the volvo and twists off the cap of the bottle.
2016-01-09 23:53:51  ★ Richard Hawkins would then fill up the reservoir  as he would then walk over to the driverside of the volvo
2016-01-09 23:54:20   [English] Richard Hawkins says: And lifts his leg into the volvo and pumps the brake pedal a couple of times as he would then
2016-01-09 23:54:31  ★ Richard Hawkins And lifts his leg into the volvo and pumps the brake pedal a couple of times as he would then
2016-01-09 23:55:08  ★ keep pressure on the pedal as the other person opens the bleed valve.      ((Richard Hawkins))
2016-01-09 23:55:43  ★ Richard Hawkins would repeat the same action, until there wont be any more air bubbles in the brake fluid
2016-01-09 23:55:54  ★ coaming from the brake caliper.      ((Richard Hawkins))
2016-01-09 23:56:07  ★ Richard Hawkins would then step out of the car as he would then shut the door.
2016-01-09 23:56:34  ★ Richard Hawkins would then bend down to the rim as he would then grab ahold of it with both of his hands and
2016-01-09 23:56:54  ★ walks over to the front of the car as he would then aligne the holes in the rim with the      ((Richard Hawkins))
2016-01-09 23:57:13  ★ wheelhub nut holes.      ((Richard Hawkins))
2016-01-09 23:59:04  ★ Richard Hawkins would then crouch down as he reaches into his right pocket and takes out  4 17mm wheel bolts
2016-01-10 00:03:31  ★ Richard Hawkins would then tighten the 17mm nuts with his fingers as he would then reach for the  breaker
2016-01-10 00:03:41  ★ bar and disconnects the 17mm socket from it.      ((Richard Hawkins))
2016-01-10 00:04:55  ★ Richard Hawkins would then reach into the toolbox as he would then take out the torque bar and
2016-01-10 00:05:15  ★ connects the 17mm socket to it as he would then set the torque to 120N:m      ((Richard Hawkins))
2016-01-10 00:06:53  ★ Richard Hawkins would then tighten the 4 wheelnuts with the torque bar.
2016-01-10 00:07:12  ★ Richard Hawkins would repeat the same action on all other 3 brakes.
2016-01-10 00:07:39  ★ Richard Hawkins would then walk around the car has he would then collect all the tools and drops them into
2016-01-10 00:07:43  ★ the toolbox.      ((Richard Hawkins))
2016-01-10 00:08:32  ★ Richard Hawkins would then walk over to the elevators control panel as he would then press on a button
2016-01-10 00:08:54  ★ with his index finger and lowers the elevator as he would then release the button as soon      ((Richard Hawkins))
2016-01-10 00:09:05  ★ as the elevator reaches to the lowest.      ((Richard Hawkins))
2016-01-10 00:10:40  ★ Richard Hawkins would then walk over to the sink as he would then turn it on and washes his hands..