Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- nihosa@nihosa-lenovo:~/Downloads/qemu-2.9.0-rc4/sparc64-softmmu$ ./qemu-system-sparc64 -hda /home/nihosa/Downloads/debian-sparc.qcow2 -nographic -L pc-bios -m 200 -kernel /home/nihosa/Downloads/qflex-private/images/kernel/vmlinux-3.2.0-4-sparc64 -initrd /home/nihosa/Downloads/qflex-private/images/kernel/initrd.img-3.2.0-4-sparc64.gz
- OpenBIOS for Sparc64
- Configuration device id QEMU version 1 machine id 0
- kernel addr 404000 size 5a1dc8
- kernel cmdline
- CPUs: 1 x SUNW,UltraSPARC-IIi
- UUID: 00000000-0000-0000-0000-000000000000
- Welcome to OpenBIOS v1.1 built on Mar 15 2017 19:37
- Type 'help' for detailed information
- [sparc64] Kernel already loaded
- [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.10.24 1999/01/01 01:01'
- [ 0.000000] PROMLIB: Root node compatible: sun4u
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-4-sparc64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.65-1
- [ 0.000000] bootconsole [earlyprom0] enabled
- [ 0.000000] ARCH: SUN4U
- [ 0.000000] Ethernet address: 52:54:00:12:34:56
- [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
- [ 0.000000] Remapping the kernel... done.
- [ 0.000000] OF stdout device is: /pci@1fe,0/ebus@3/su
- [ 0.000000] PROM: Built device tree with 34886 bytes of memory.
- [ 0.000000] Top of RAM: 0xc680000, Total RAM: 0xc680000
- [ 0.000000] Memory hole size: 0MB
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00006340
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00006340
- [ 0.000000] Booting Linux...
- [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
- [ 0.000000] CPU CAPS: [vis]
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 25209
- [ 0.000000] Kernel command line:
- [ 0.000000] PID hash table entries: 1024 (order: 0, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
- [ 0.000000] Memory: 179032k available (3440k kernel code, 1432k data, 192k init) [fffff80000000000,000000000c680000]
- [ 0.000000] NR_IRQS:255
- [ 0.000000] clocksource: mult[a000000] shift[24]
- [ 0.000000] clockevent: mult[1999999a] shift[32]
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled, bootconsole disabled
- [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.10.24 1999/01/01 01:01'
- [ 0.000000] PROMLIB: Root node compatible: sun4u
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-4-sparc64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.65-1
- [ 0.000000] bootconsole [earlyprom0] enabled
- [ 0.000000] ARCH: SUN4U
- [ 0.000000] Ethernet address: 52:54:00:12:34:56
- [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
- [ 0.000000] Remapping the kernel... done.
- [ 0.000000] OF stdout device is: /pci@1fe,0/ebus@3/su
- [ 0.000000] PROM: Built device tree with 34886 bytes of memory.
- [ 0.000000] Top of RAM: 0xc680000, Total RAM: 0xc680000
- [ 0.000000] Memory hole size: 0MB
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00006340
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00006340
- [ 0.000000] Booting Linux...
- [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
- [ 0.000000] CPU CAPS: [vis]
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 25209
- [ 0.000000] Kernel command line:
- [ 0.000000] PID hash table entries: 1024 (order: 0, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
- [ 0.000000] Memory: 179032k available (3440k kernel code, 1432k data, 192k init) [fffff80000000000,000000000c680000]
- [ 0.000000] NR_IRQS:255
- [ 0.000000] clocksource: mult[a000000] shift[24]
- [ 0.000000] clockevent: mult[1999999a] shift[32]
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled, bootconsole disabled
- [ 2.698251] Calibrating delay using timer specific routine.. 204.92 BogoMIPS (lpj=409847)
- [ 2.698446] pid_max: default: 32768 minimum: 301
- [ 2.699015] Security Framework initialized
- [ 2.700243] AppArmor: AppArmor disabled by boot time parameter
- [ 2.700658] Mount-cache hash table entries: 512
- [ 2.708029] Initializing cgroup subsys cpuacct
- [ 2.708131] Initializing cgroup subsys memory
- [ 2.708467] Initializing cgroup subsys devices
- [ 2.708537] Initializing cgroup subsys freezer
- [ 2.708584] Initializing cgroup subsys net_cls
- [ 2.708628] Initializing cgroup subsys blkio
- [ 2.708702] Initializing cgroup subsys perf_event
- [ 2.713518] Performance events: No support for PMU type 'ultra12'
- [ 2.721809] devtmpfs: initialized
- [ 2.728180] print_constraints: dummy:
- [ 2.729577] NET: Registered protocol family 16
- [ 2.738599] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00100000]
- [ 2.738798] /pci@1f,0: Unable to request IOMMU resource.
- [ 2.738841] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
- [ 2.738891] PCI: Scanning PBM /pci@1f,0
- [ 2.750854] bio: create slab <bio-0> at 0
- [ 2.754535] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 2.754704] vgaarb: loaded
- [ 2.754757] vgaarb: bridge control possible 0000:00:02.0
- [ 2.759464] /pci@1f,0/ebus@3/eeprom@14,2000: Mostek regs at 0x1fe02006000
- [ 2.760511] Switching to clocksource tick
- [ 2.787614] NET: Registered protocol family 2
- [ 2.794667] IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
- [ 2.797535] TCP established hash table entries: 8192 (order: 4, 131072 bytes)
- [ 2.797799] TCP bind hash table entries: 8192 (order: 3, 65536 bytes)
- [ 2.797947] TCP: Hash tables configured (established 8192 bind 8192)
- [ 2.798033] TCP reno registered
- [ 2.798124] UDP hash table entries: 256 (order: 0, 8192 bytes)
- [ 2.798247] UDP-Lite hash table entries: 256 (order: 0, 8192 bytes)
- [ 2.799307] NET: Registered protocol family 1
- [ 2.802410] Unpacking initramfs...
- [ 3.455130] Freeing initrd memory: 9686k freed
- [ 3.458528] audit: initializing netlink socket (disabled)
- [ 3.458965] type=2000 audit(0.840:1): initialized
- [ 3.501132] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 3.503107] VFS: Disk quotas dquot_6.5.2
- [ 3.503275] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
- [ 3.505103] msgmni has been set to 368
- [ 3.513988] alg: No test for stdrng (krng)
- [ 3.514299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 3.514471] io scheduler noop registered
- [ 3.514520] io scheduler deadline registered
- [ 3.514652] io scheduler cfq registered (default)
- [ 3.519306] ffe30ea8: ttyS0 at MMIO 0x1fe020043f8 (irq = 5) is a 16550A
- [ 3.519483] Console: ttyS0 (SU)
- [ 3.535546] console [ttyS0] enabled
- [ 3.541974] mousedev: PS/2 mouse device common for all mice
- [ 3.545228] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
- [ 3.547115] TCP cubic registered
- [ 3.547698] NET: Registered protocol family 10
- [ 3.555971] Mobile IPv6
- [ 3.556287] NET: Registered protocol family 17
- [ 3.556611] Registering the dns_resolver key type
- [ 3.557707] registered taskstats version 1
- [ 3.558982] rtc-m48t59 rtc-m48t59.0: setting system clock to 2017-04-21 15:05:36 UTC (1492787136)
- [ 3.559511] Initializing network drop monitor service
- Loading, please wait...
- [ 4.126761] udevd[43]: starting version 175
- [ 6.670727] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
- [ 6.845025] eth0: RealTek RTL-8029 found at 0x1fe02008000, IRQ 6, 52:54:00:12:34:56.
- [ 6.899257] SCSI subsystem initialized
- [ 7.056209] scsi0 : pata_cmd64x
- [ 7.070732] scsi1 : pata_cmd64x
- [ 7.072338] ata1: PATA max UDMA/33 cmd 0x1fe02008100 ctl 0x1fe02008180 bmdma 0x1fe02008300 irq 7
- [ 7.072889] ata2: PATA max UDMA/33 cmd 0x1fe02008200 ctl 0x1fe02008280 bmdma 0x1fe02008308 irq 7
- [ 7.237937] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
- [ 7.239120] ata1.00: 8388608 sectors, multi 16: LBA48
- [ 7.264948] ata1.00: configured for UDMA/33
- [ 7.302144] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
- [ 7.486762] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
- [ 7.487559] ata2.00: configured for UDMA/33
- [ 7.490871] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
- [ 7.670987] sd 0:0:0:0: [sda] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
- [ 7.681254] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.682518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.696945] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
- [ 7.697574] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 7.712825] sda: sda1 sda2 sda3 sda4
- [ 7.730127] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 7.851007] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 7.852110] sr 1:0:0:0: Attached scsi generic sg1 type 5
- ata_id[116]: unable to open '/dev/sr0'
- ata_id[121]: unable to open '/dev/sr0'
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- modprobe: module unknown not found in modules.dep
- mount: can't read '/etc/fstab': No such file or directory
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
- done.
- Target filesystem doesn't have requested /sbin/init.
- No init found. Try passing init= bootarg.
- [ 10.008754] usbcore: registered new interface driver usbfs
- [ 10.011066] usbcore: registered new interface driver hub
- [ 10.015050] usbcore: registered new device driver usb
- [ 10.018458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 10.068153] uhci_hcd: USB Universal Host Controller Interface driver
- [ 10.117485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 10.173519] usbcore: registered new interface driver usbhid
- [ 10.173946] usbhid: USB HID core driver
- BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- /bin/sh: can't access tty; job control turned off
- (initramfs)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement