API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 14th, 2018
1,616
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 76.99 KB | None | 0 0
raw download clone embed print report
  1. LibreELEC (community): 8.90.4 (S905.arm)
  2. LibreELEC:~ # dmesg
  3. [ 0.000000@0] Initializing cgroup subsys cpuset
  4. [ 0.000000@0] Initializing cgroup subsys cpu
  5. [ 0.000000@0] Initializing cgroup subsys cpuacct
  6. [ 0.000000@0] Linux version 3.14.29 (adamg@ubuntu) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11) ) #1 SMP Tue Feb 13 00:54:41 GMT 2018
  7. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  8. [ 0.000000@0] no prop version_code
  9. [ 0.000000@0] bootconsole [earlycon0] enabled
  10. [ 0.000000@0] fdt Reserved memory table:
  11. [ 0.000000@0] linux,meson-fb: 0x000000007e000000 - 0x0000000080000000 (32 MiB)
  12. [ 0.000000@0] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB)
  13. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
  14. [ 0.000000@0] linux,ion-dev: 0x000000007a200000 - 0x000000007c200000 (32 MiB)
  15. [ 0.000000@0] linux,vdin1_cma: 0x0000000079000000 - 0x000000007a000000 (16 MiB)
  16. [ 0.000000@0] cma: Reserved 16 MiB at 79000000, total cma pages:4096
  17. [ 0.000000@0] linux,ppmgr: 0x000000007a200000 - 0x000000007a200000 (0 MiB)
  18. [ 0.000000@0] linux,codec_mm_cma: 0x0000000067800000 - 0x0000000073800000 (192 MiB)
  19. [ 0.000000@0] cma: Reserved 192 MiB at 67800000, total cma pages:53248
  20. [ 0.000000@0] linux,picdec: 0x000000007a200000 - 0x000000007a200000 (0 MiB)
  21. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  22. [ 0.000000@0] linux,codec_mm_reserved: 0x0000000074f00000 - 0x0000000079000000 (65 MiB)
  23. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  24. [ 0.000000@0] cma: Reserved 8 MiB at 74400000, total cma pages:55296
  25. [ 0.000000@0] On node 0 totalpages: 514816
  26. [ 0.000000@0] Normal zone: 11083 pages used for memmap
  27. [ 0.000000@0] Normal zone: 0 pages reserved
  28. [ 0.000000@0] Normal zone: 514816 pages, LIFO batch:31
  29. [ 0.000000@0] psci: probing function IDs from device-tree
  30. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07a19f000 s17536 r8192 d23424 u49152
  31. [ 0.000000@0] pcpu-alloc: s17536 r8192 d23424 u49152 alloc=12*4096
  32. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  33. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503733
  34. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p50hz maxcpus=4 vout=1080p50hz,enable hdmimode=1080p50hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.ddrclk=666MHz androidboot.hardware=amlogic mac=06:41:71:22:9b:28 androidboot.mac=06:41:71:22:9b:28 androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_status=auto ssh
  35. [ 0.000000@0] logo: osd1
  36. [ 0.000000@0] logo: loaded
  37. [ 0.000000@0] logo: 0x3d800000
  38. [ 0.000000@0] logo: 1080p50hz
  39. [ 0.000000@0] vout_serve: 1080p50hz
  40. [ 0.000000@0] vout_serve: en: 1
  41. [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p50hz
  42. [ 0.000000@0] vout_serve: 1080p50hz
  43. [ 0.000000@0] vout_serve: enable: 1
  44. [ 0.000000@0] logo: get hdmimode: 1080p50hz
  45. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  46. [ 0.000000@0] tv_vout: cvbs performance line = 0
  47. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  48. [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  49. [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  50. [ 0.000000@0] Memory: 1639160K/2059264K available (6977K kernel code, 815K rwdata, 2624K rodata, 909K init, 2903K bss, 420104K reserved)
  51. [ 0.000000@0] Virtual kernel memory layout:
  52. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  53. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042b60000 ( 43 MB)
  54. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  55. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e000000 ( 2016 MB)
  56. [ 0.000000@0] .init : 0xffffffc0019e2000 - 0xffffffc001ac5480 ( 910 kB)
  57. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc0019e1734 ( 9606 kB)
  58. [ 0.000000@0] .data : 0xffffffc001ac6000 - 0xffffffc001b91eb0 ( 816 kB)
  59. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019e0fff]
  60. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  61. [ 0.000000@0] arch_multi_cluster:0
  62. [ 0.000000@0] Hierarchical RCU implementation.
  63. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  65. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  66. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  67. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  68. [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  69. [ 0.008243@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
  70. [ 0.016791@0] Console: colour dummy device 80x25
  71. [ 0.021088@0] console [tty0] enabled
  72. [ 0.024672@0] bootconsole [earlycon0] disabled
  73. [ 0.033059@0] allocated 8388608 bytes of page_cgroup
  74. [ 0.033071@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  75. [ 0.033095@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  76. [ 0.033114@0] pid_max: default: 32768 minimum: 301
  77. [ 0.033258@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  78. [ 0.033271@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  79. [ 0.038454@0] Initializing cgroup subsys memory
  80. [ 0.038496@0] Initializing cgroup subsys devices
  81. [ 0.038506@0] Initializing cgroup subsys freezer
  82. [ 0.038517@0] Initializing cgroup subsys blkio
  83. [ 0.038527@0] Initializing cgroup subsys net_prio
  84. [ 0.038582@0] ftrace: allocating 23632 entries in 93 pages
  85. [ 0.063493@0] /cpus/cpu@0: Missing clock-frequency property
  86. [ 0.063523@0] /cpus/cpu@1: Missing clock-frequency property
  87. [ 0.063535@0] /cpus/cpu@2: Missing clock-frequency property
  88. [ 0.063547@0] /cpus/cpu@3: Missing clock-frequency property
  89. [ 0.065136@0] Meson chip version = RevD (21:D - A4:0)
  90. [ 0.065620@1] CPU1: Booted secondary processor
  91. [ 0.066012@2] CPU2: Booted secondary processor
  92. [ 0.066351@3] CPU3: Booted secondary processor
  93. [ 0.066424@0] Brought up 4 CPUs
  94. [ 0.066461@0] SMP: Total of 4 processors activated.
  95. [ 0.067007@0] devtmpfs: initialized
  96. [ 0.073629@0] sched: registering cpufreq notifiers for scale-invariant loads
  97. [ 0.073677@0] instabooting: 0
  98. [ 0.083269@0] cma: cma_init_reserved_areas, use_cma_first:1
  99. [ 0.083409@0] pinctrl core: initialized pinctrl subsystem
  100. [ 0.084045@0] regulator-dummy: no parameters
  101. [ 0.084758@0] NET: Registered protocol family 16
  102. [ 0.086204@0] ramoops: using module parameters
  103. [ 0.086773@0] pstore: Registered ramoops as persistent store backend
  104. [ 0.086796@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0
  105. [ 0.087564@0] aml_vdac_init: module init
  106. [ 0.087724@0] register canvas platform driver
  107. [ 0.087797@0] register rdma platform driver
  108. [ 0.089051@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001ad0000
  109. [ 0.089462@0] DMA: preallocated 256 KiB pool for atomic allocations
  110. [ 0.091450@0] software IO TLB [mem 0x63800000-0x63c00000] (4MB) mapped at [ffffffc063800000-ffffffc063bfffff]
  111. [ 0.091938@0] aml_i2c version: 20140813
  112. [ 0.092146@0] i2c-core: driver [pmu4] using legacy resume method
  113. [ 0.092219@0] codec_mm:codec_mm_module_init
  114. [ 0.092510@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  115. [ 0.092524@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  116. [ 0.092536@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  117. [ 0.092750@0] clk_sys: register PLL sys_pll success done
  118. [ 0.092770@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  119. [ 0.092781@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  120. [ 0.092790@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
  121. [ 0.092800@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
  122. [ 0.092809@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  123. [ 0.092819@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  124. [ 0.092827@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  125. [ 0.092836@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  126. [ 0.092845@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  127. [ 0.092882@0] gxl_clk: clock initialization complete
  128. [ 0.093132@0] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
  129. [ 0.095402@0] aml_iomap: amlogic iomap probe done
  130. [ 0.095911@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
  131. [ 0.096806@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  132. [ 0.097332@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  133. [ 0.097366@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  134. [ 0.097506@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  135. [ 0.097528@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  136. [ 0.099787@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
  137. [ 0.099799@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
  138. [ 0.099809@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
  139. [ 0.099818@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
  140. [ 0.099828@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
  141. [ 0.099837@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
  142. [ 0.099847@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1200000000
  143. [ 0.101639@0] codec_mm has 2 memory regions
  144. [ 0.101697@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
  145. [ 0.101716@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
  146. [ 0.101821@0] codec_mm has 2 memory regions
  147. [ 0.101840@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
  148. [ 0.101856@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
  149. [ 0.103613@0] vpu: driver version: v03
  150. [ 0.103664@0] vpu: load vpu_clk: 666667000Hz(7)
  151. [ 0.103757@0] vpu: vpu_probe OK
  152. [ 0.104990@0] tv_vout: tvout_probe
  153. [ 0.105016@0] tv_vout: chrdev devno 265289728 for disp
  154. [ 0.105025@0] vout_notify: vout_register_server
  155. [ 0.105033@0] tv_vout: register tv module server ok
  156. [ 0.105278@0] tv_vout: create cdev tv
  157. [ 0.105293@0] tv_vout: tvout_probe OK
  158. [ 0.106194@0] canvas_probe reg=00000000c8838000,size=400
  159. [ 0.106236@0] canvas maped reg_base =ffffff800008e000
  160. [ 0.110073@0] rdma_probe
  161. [ 0.311893@0] bio: create slab <bio-0> at 0
  162. [ 0.312784@0] SCSI subsystem initialized
  163. [ 0.313317@0] usbcore: registered new interface driver usbfs
  164. [ 0.313411@0] usbcore: registered new interface driver hub
  165. [ 0.313532@0] usbcore: registered new device driver usb
  166. [ 0.314350@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
  167. [ 0.314549@0] pps_core: LinuxPPS API ver. 1 registered
  168. [ 0.314562@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  169. [ 0.314631@0] PTP clock support registered
  170. [ 0.315126@0] hdmitx: system: amhdmitx_init
  171. [ 0.315140@0] hdmitx: system: Ver: 2014May6
  172. [ 0.315334@0] hdmitx: system: amhdmitx_probe
  173. [ 0.315665@0] hdmitx: system: not find match init-data
  174. [ 0.315684@0] hdmitx hpd irq = 89
  175. [ 0.316907@0] hdmitx20: Mapped PHY: 0xc0800000
  176. [ 0.316937@0] hdmitx20: Mapped PHY: 0xc1104400
  177. [ 0.316961@0] hdmitx20: Mapped PHY: 0xc8100000
  178. [ 0.316971@0] hdmitx20: Mapped PHY: 0xc8834000
  179. [ 0.316980@0] hdmitx20: Mapped PHY: 0xc883a000
  180. [ 0.316989@0] hdmitx20: Mapped PHY: 0xc883c000
  181. [ 0.317001@0] hdmitx20: Mapped PHY: 0xd0100000
  182. [ 0.317011@0] hdmitx20: Mapped PHY: 0xda83a000
  183. [ 0.317028@0] hdmitx: alread display in uboot 0x1f
  184. [ 0.317075@0] avmute set to 1
  185. [ 0.317589@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=18
  186. [ 0.317613@0] tv_vout: mode is 18,sync_duration_den=1,sync_duration_num=50
  187. [ 0.317633@0] tv_vout: already display in uboot
  188. [ 0.317641@0] vout_serve: vinfo mode is: 1080p50hz
  189. [ 0.317649@0] vout_serve: init mode 1080p50hz
  190. [ 0.317894@0] vout_serve: create_vout_fops OK
  191. [ 0.317905@0] vout_serve: create vout attribute OK
  192. [ 0.317913@0] vout_serve: meson_vout_probe OK
  193. [ 0.318102@0] logo: logo_init
  194. [ 0.318382@0] osd_rdma: osd_rdma_init: rdma_table p=0x74441000,op=0x74441000 , v=0xffffff80000a9000
  195. [ 0.318415@0] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 74442000 reg_buf ffffffc06344c000
  196. [ 0.318429@0] rdma_register success, handle 1 table_size 4096
  197. [ 0.318438@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  198. [ 0.318460@0] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy 74443000 reg_buf ffffffc06344d000
  199. [ 0.318473@0] rdma_register success, handle 2 table_size 4096
  200. [ 0.318482@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  201. [ 0.318923@0] Advanced Linux Sound Architecture Driver Initialized.
  202. [ 0.320999@0] Switched to clocksource arch_sys_counter
  203. [ 0.324210@0] hdmitx: system: irq 80000002
  204. [ 0.331162@0] FS-Cache: Loaded
  205. [ 0.340431@1] NET: Registered protocol family 2
  206. [ 0.340909@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  207. [ 0.341075@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  208. [ 0.341335@1] TCP: Hash tables configured (established 16384 bind 16384)
  209. [ 0.341454@1] TCP: reno registered
  210. [ 0.341471@1] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  211. [ 0.341518@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  212. [ 0.341780@1] NET: Registered protocol family 1
  213. [ 0.342459@1] pwm: probe ok
  214. [ 0.342759@1] wifi: power_on_pin_OD = 0;
  215. [ 0.342777@1] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
  216. [ 0.342820@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
  217. [ 0.342835@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
  218. [ 0.342848@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
  219. [ 0.342860@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
  220. [ 0.342873@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
  221. [ 0.342886@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
  222. [ 0.342898@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
  223. [ 0.342910@1] aml_wifi wifi.32: [pwm_double_channel_conf_dt] wifi pwm dt ok
  224. [ 0.342939@1] aml_wifi wifi.32: [pwm_double_channel_conf] wifi pwm conf ok
  225. [ 0.342994@1] aml_wifi wifi.32: [wifi_dev_probe] dhd_static_buf setup
  226. [ 0.343082@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  227. [ 0.343095@1] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
  228. [ 0.343106@1] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  229. [ 0.343119@1] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
  230. [ 0.343129@1] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
  231. [ 0.343444@1] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
  232. [ 0.343486@1] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
  233. [ 0.343506@1] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
  234. [ 0.343723@1] Unpacking initramfs...
  235. [ 0.356794@1] Freeing initrd memory: 3956K (ffffffc073ac0000 - ffffffc073e9d000)
  236. [ 0.359476@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  237. [ 0.368864@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  238. [ 0.369390@1] msgmni has been set to 3641
  239. [ 0.370522@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  240. [ 0.370619@1] io scheduler noop registered (default)
  241. [ 0.370631@1] io scheduler deadline registered
  242. [ 0.370660@1] io scheduler cfq registered
  243. [ 0.371652@1] meson-rng c8834000.rng: hwrng registered
  244. [ 0.375374@1] loop: module loaded
  245. [ 0.377387@1] tun: Universal TUN/TAP device driver, 1.6
  246. [ 0.377414@1] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  247. [ 0.381577@0] libphy: stmmac: probed
  248. [ 0.381609@0] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
  249. [ 0.382372@0] PPP generic driver version 2.4.2
  250. [ 0.382684@1] NET: Registered protocol family 24
  251. [ 0.382817@1] usbcore: registered new interface driver smsc95xx
  252. [ 0.383186@1] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  253. [ 0.383334@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  254. [ 0.383360@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  255. [ 0.383602@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  256. [ 0.383924@1] usbcore: registered new interface driver usb-storage
  257. [ 0.384162@1] usbcore: registered new interface driver usbserial
  258. [ 0.384264@1] usbcore: registered new interface driver usbserial_generic
  259. [ 0.384355@1] usbserial: USB Serial support registered for generic
  260. [ 0.384449@1] usbcore: registered new interface driver pl2303
  261. [ 0.384529@1] usbserial: USB Serial support registered for pl2303
  262. [ 0.385115@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000ee000
  263. [ 0.385330@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  264. [ 0.385362@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fa080
  265. [ 0.385708@1] mousedev: PS/2 mouse device common for all mice
  266. [ 0.385954@1] i2c /dev entries driver
  267. [ 0.387343@1] ledtrig-cpu: registered to indicate activity on CPUs
  268. [ 0.387536@1] hidraw: raw HID events driver (C) Jiri Kosina
  269. [ 0.390065@1] usbcore: registered new interface driver usbhid
  270. [ 0.390091@1] usbhid: USB HID core driver
  271. [ 0.390320@1] ashmem: initialized
  272. [ 0.390750@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fc4c0
  273. [ 0.390793@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  274. [ 0.390817@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  275. [ 0.661145@0] hdmitx: plugin
  276. [ 0.716598@0] EDID Parser:
  277. [ 0.717075@0] hdmitx: get dtd0 vic: 31
  278. [ 0.717082@0] dump_dtd_info[1762]
  279. [ 0.717084@0] pixel_clock 8550
  280. [ 0.717085@0] h_active 1360
  281. [ 0.717087@0] h_blank 432
  282. [ 0.717088@0] v_active 768
  283. [ 0.717089@0] v_blank 27
  284. [ 0.717090@0] h_sync_offset 64
  285. [ 0.717092@0] h_sync 112
  286. [ 0.717093@0] v_sync_offset 3
  287. [ 0.717094@0] v_sync 6
  288. [ 0.717117@0] hdmitx: get dtd1 vic: 16
  289. [ 0.717120@0] hdmitx: get dtd2 vic: 20
  290. [ 0.717122@0] hdmitx: edid: find IEEEOUT
  291. [ 0.717127@0] hdmitx: edid: check sum valid
  292. [ 0.717128@0] hdmitx: edid: check sum valid
  293. [ 0.717133@0] hdmitx: update RX hdr info 0
  294. [ 0.717137@0] hdmitx: edid: check sum valid
  295. [ 0.717139@0] hdmitx: edid: check sum valid
  296. [ 0.717142@0] hdmitx: edid: blk0 raw data
  297. [ 0.717179@0] 00ffffffffffff004d10481000000000ff140103809a57782a1bbea25534b326
  298. [ 0.717179@0] 144a52afce00a9409040818001010101010101010101023a80d072382d40102c
  299. [ 0.717179@0] 458003626300001e662150b051001b304070360000000000001e000000fc0053
  300. [ 0.717179@0] 484152502048444d490a2020000000fd00174c0f4b11000a202020202020010c
  301. [ 0.717179@0]
  302. [ 0.717179@0]
  303. [ 0.717181@0] hdmitx: edid: blk1 raw data
  304. [ 0.717218@0] 02032e72509f9020140513041203110216071506012309070783010000e30503
  305. [ 0.717218@0] 016c030c002000b82dc03d3d5b5b023a801871382d40582c450003626300001e
  306. [ 0.717218@0] 011d80d0721c1620102c258003626300009e011d8018711c1620582c25000362
  307. [ 0.717218@0] 6300009e011d00bc52d01e20b828554003626300001e000000000000000000e2
  308. [ 0.717218@0]
  309. [ 0.717218@0]
  310. [ 0.717250@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  311. [ 0.717257@0] hdmitx: video: get current mode: 1080p50hz
  312. [ 0.717258@0] hdmitx: update rx hdr info 0
  313. [ 0.717260@0] hdmitx: update physcial size: 1540 870
  314. [ 0.717283@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 31
  315. [ 0.717289@0] hdmtix: set audio
  316. [ 0.717299@0] hdmitx tx_aud_src = 0
  317. [ 0.717325@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
  318. [ 0.717329@0] hdmitx aud_n_para = 6144
  319. [ 0.717346@0] hdmitx set channel status
  320. [ 2.138809@3] console [ttyS0] enabled
  321. [ 2.142924@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80000fe4c0
  322. [ 2.149538@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  323. [ 2.159611@0] hdmitx: system: hdmitx_hdcp_init
  324. [ 2.164071@0] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
  325. [ 2.169800@0] secmon has 1 memory regions
  326. [ 2.173517@0] secmon: share in base: 0xffffff800011a000, share out base: 0xffffff800011c000
  327. [ 2.181749@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
  328. [ 2.188761@0] secmon: probe done
  329. [ 2.192375@0] storage: storage in base: 0xffffff8001800000
  330. [ 2.197347@0] storage: storage out base: 0xffffff8001880000
  331. [ 2.202874@0] storage: storage block base: 0xffffff8001900000
  332. [ 2.208588@0] storage: probe done!
  333. [ 2.212567@0] aml_sd_emmc_probe: line 3594
  334. [ 2.215980@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  335. [ 2.225867@0] aml_sd_emmc_reg_init 1149
  336. [ 2.229231@0] get property: ocr_avail, value:0x00200080
  337. [ 2.235654@0] get property: f_min, value:300000
  338. [ 2.241774@0] get property: f_max, value:100000000
  339. [ 2.248183@0] get property: max_req_size, value:0x00020000
  340. [ 2.254629@0] get property: pinname, str:emmc
  341. [ 2.260399@0] get property: card_type, value:1
  342. [ 2.266128@0] get property: gpio_dat3, str:
  343. [ 2.271530@0] get property: hw_reset, str:
  344. [ 2.276980@0] emmc:pdata->caps = c0000d47
  345. [ 2.280928@0] emmc:pdata->caps2 = 18060
  346. [ 2.284739@0] emmc:pdata->pm_caps = 0
  347. [ 2.288353@0] storage 1, boot 1
  348. [ 2.291451@0] get_storage_dev return 1
  349. [ 2.331001@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  350. [ 2.336534@0] aml_sd_emmc_probe: line 3594
  351. [ 2.336976@0] aml_sd_emmc_reg_init 1149
  352. [ 2.339163@0] get property: ocr_avail, value:0x00200080
  353. [ 2.345647@0] get property: f_min, value:400000
  354. [ 2.351717@0] get property: f_max, value:100000000
  355. [ 2.358024@0] get property: max_req_size, value:0x00020000
  356. [ 2.364512@0] get property: irq_in, value:3
  357. [ 2.370185@0] get property: irq_out, value:5
  358. [ 2.375966@0] get property: gpio_cd, str:
  359. [ 2.381317@0] get property: pinname, str:sd
  360. [ 2.386933@0] get property: jtag_pin, str:
  361. [ 2.392434@0] get property: card_type, value:5
  362. [ 2.398115@0] get property: gpio_dat3, str:
  363. [ 2.403572@0] sd:pdata->caps = 7
  364. [ 2.406754@0] sd:pdata->caps2 = 0
  365. [ 2.410015@0] sd:pdata->pm_caps = 0
  366. [ 2.421175@3] emmc: BKOPS_EN bit is not set
  367. [ 2.427706@3] emmc: trying cali 0-th time(s)
  368. [ 2.438682@3] emmc: delay[0]= 3200 padding= 4, bidx=3
  369. [ 2.438707@3] emmc: delay[1]= 3400 padding= 3, bidx=3
  370. [ 2.443109@3] emmc: delay[2]= 3000 padding= 5, bidx=3
  371. [ 2.448102@3] emmc: delay[3]= 3400 padding= 3, bidx=3
  372. [ 2.451235@2] [aml_is_card_insert] card IN
  373. [ 2.457169@3] emmc: delay[4]= 3600 padding= 2, bidx=3
  374. [ 2.462165@3] emmc: delay[5]= 3200 padding= 4, bidx=3
  375. [ 2.467163@3] emmc: delay[6]= 3600 padding= 2, bidx=3
  376. [ 2.472170@3] emmc: delay[7]= 3400 padding= 3, bidx=3
  377. [ 2.477169@3] emmc: calibration result @ 0: max(3600), min(3000)
  378. [ 2.483124@3] emmc: line_delay =0x10201312, max_cal_result =3600
  379. [ 2.489070@3] emmc: base_index_max 3, base_index_min 3
  380. [ 2.494167@3] emmc: clk 100000000 SDR mode tuning start
  381. [ 2.499879@3] emmc: rx_tuning_result[0] = 10
  382. [ 2.503960@3] emmc: rx_tuning_result[1] = 10
  383. [ 2.508179@3] emmc: rx_tuning_result[2] = 10
  384. [ 2.512546@3] emmc: rx_tuning_result[3] = 10
  385. [ 2.516632@3] emmc: rx_tuning_result[4] = 10
  386. [ 2.520859@3] emmc: rx_tuning_result[5] = 10
  387. [ 2.525226@3] emmc: rx_tuning_result[6] = 10
  388. [ 2.529310@3] emmc: rx_tuning_result[7] = 10
  389. [ 2.533542@3] emmc: rx_tuning_result[8] = 10
  390. [ 2.537900@3] emmc: rx_tuning_result[9] = 10
  391. [ 2.541603@3] emmc: best_win_start =0, best_win_size =10
  392. [ 2.546859@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
  393. [ 2.552485@2] normal card in
  394. [ 2.552518@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  395. [ 2.552567@1] aml_sd_emmc_probe: line 3594
  396. [ 2.552988@1] aml_sd_emmc_reg_init 1149
  397. [ 2.553050@1] get property: ocr_avail, value:0x00200080
  398. [ 2.553054@1] get property: f_min, value:400000
  399. [ 2.553056@1] get property: f_max, value:200000000
  400. [ 2.553060@1] get property: max_req_size, value:0x00020000
  401. [ 2.553067@1] get property: pinname, str:sdio
  402. [ 2.553070@1] get property: card_type, value:3
  403. [ 2.553102@1] sdio:pdata->caps = 7810f
  404. [ 2.553105@1] sdio:pdata->caps2 = 0
  405. [ 2.553108@1] sdio:pdata->pm_caps = 1
  406. [ 2.591015@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  407. [ 2.591439@1] ion_dev has 1 memory regions
  408. [ 2.594468@1] fb: osd_init_module
  409. [ 2.594623@1] fb: viu vsync irq: 35
  410. [ 2.594632@1] meson-fb has 1 memory regions
  411. [ 2.594682@1] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok
  412. [ 2.594702@1] fb: osd_probe vinfo:ffffffc001b2d2a8
  413. [ 2.594708@1] fb: init fbdev bpp is:32
  414. [ 2.655046@3] emmc: gclock =0x100024a, gdelay=0x10201312, gadjust=0x2000
  415. [ 2.661771@1] emmc: new HS200 MMC card at address 0001
  416. [ 2.666749@1] emmc: clock 100000000, 8-bit-bus-width
  417. [ 2.666749@1]
  418. [ 2.672054@1] fb: set osd0 reverse as NONE
  419. [ 2.676352@1] mmcblk0: emmc:0001 SEM16G 14.6 GiB
  420. [ 2.680792@1] mmcblk0boot0: emmc:0001 SEM16G partition 1 4.00 MiB
  421. [ 2.684202@0] fb: osd probe OK
  422. [ 2.689813@1] ge2d: ge2d_init_module
  423. [ 2.693241@1] ge2d: ge2d_dev major:242
  424. [ 2.693433@0] mmcblk0boot1: emmc:0001 SEM16G partition 2 4.00 MiB
  425. [ 2.693646@0] mmcblk0rpmb: emmc:0001 SEM16G partition 3 4.00 MiB
  426. [ 2.709430@1] ge2d: ge2d clock is 400 MHZ
  427. [ 2.712909@1] ge2d: ge2d: pdev=ffffffc000295600, irq=182, rstc=0xffffffc063413040, clk=ffffffc000188e00
  428. [ 2.713828@0] mmcblk0: unknown partition table
  429. [ 2.726808@1] ge2d: mapped phy: 0xd0160000
  430. [ 2.730753@1] ge2d: ge2d start monitor
  431. [ 2.731974@3] [mmc_read_partition_tbl] mmc read partition OK!
  432. [ 2.731975@3] add_emmc_partition
  433. [ 2.732361@2] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  434. [ 2.732603@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  435. [ 2.732745@2] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  436. [ 2.732881@2] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  437. [ 2.733010@2] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  438. [ 2.733152@2] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  439. [ 2.733282@2] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  440. [ 2.733420@2] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  441. [ 2.733568@2] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  442. [ 2.733708@2] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  443. [ 2.733842@2] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  444. [ 2.733975@2] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  445. [ 2.734114@2] [mmcblk0p13] data offset 0x0000b7400000, size 0x0002f4000000
  446. [ 2.734158@2] card key: card_blk_probe.
  447. [ 2.734163@2] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  448. [ 2.734167@2] emmc key: emmc_key_init:552 ok.
  449. [ 2.738368@3] amlmmc_dtb_init: register dtb chardev
  450. [ 2.738369@3] calc 5b1347f1, store 5b1347f1
  451. [ 2.742281@3] calc 5b1347f1, store 5b1347f1
  452. [ 2.742284@3] total valid 2
  453. [ 2.742979@2] amlmmc_dtb_init: register dtb chardev OK
  454. [ 2.742980@2] Exit aml_emmc_partition_ops OK.
  455. [ 2.744317@2] mmcblk0boot1: unknown partition table
  456. [ 2.745548@2] mmcblk0boot0: unknown partition table
  457. [ 2.745875@2] clear_emmc_wait_flag
  458. [ 2.785151@3] sd: new high speed SDHC card at address 0007
  459. [ 2.785768@2] sd: clock 50000000, 4-bit-bus-width
  460. [ 2.785768@2]
  461. [ 2.785768@2] mmcblk1: sd:0007 SD08G 7.42 GiB
  462. [ 2.786816@2] mmcblk1: p1 p2
  463. [ 2.924720@3] ge2d: ge2d workqueue monitor start
  464. [ 2.925246@1] codec:Amlogic A/V streaming port init
  465. [ 2.926988@2] codec:get gate demux control ok ffffffc0633ea200
  466. [ 2.926993@2] codec:get gate parser_top control ok ffffffc0633ea280
  467. [ 2.926998@2] codec:get gate vpu_intr control ok ffffffc0633ea300
  468. [ 2.927004@2] codec:get gate vdec control ok ffffffc0633ea380
  469. [ 2.927991@2] codec:[tsync_pcr_init]init success.
  470. [ 2.928164@2] codec:amvideocap_probe,amvideocap
  471. [ 2.928169@2] codec:use cma buf.
  472. [ 2.930625@2] codec:vdec_request_irq ffffffc00156b6b8, vsync
  473. [ 2.930911@2] codec:create_ge2d_work_queue video task ok
  474. [ 2.981164@0] rdma_register, rdma_table_addr ffffff8000271000 rdma_table_addr_phy 74450000 reg_buf ffffffc062c60000
  475. [ 2.991346@0] rdma_register success, handle 3 table_size 32768
  476. [ 2.997084@0] video_rdma:rdma_init video rdma handle = 3.
  477. [ 3.002452@0] codec:used fix clk for vdec clk source!
  478. [ 3.007458@0] codec:register clk_set_setting cpu[33]
  479. [ 3.013160@2] DI: di_module_init ok.
  480. [ 3.015890@2] DI: di_module_init: major 237
  481. [ 3.020228@2] DI: di_probe
  482. [ 3.022928@2] deinterlace has 1 memory regions
  483. [ 3.027142@2] DI: di reveser memory 0x7c200000, size 30MB.
  484. [ 3.027151@2] deinterlace deinterlace.24: assigned reserved memory node linux,di ok
  485. [ 3.034707@2] DI-di_probe: get flag_cma error.
  486. [ 3.039110@2] di_irq:78,timerc_irq:38
  487. [ 3.042876@2] rdma_register, rdma_table_addr ffffff800017d000 rdma_table_addr_phy 7444a000 reg_buf ffffffc0633b4000
  488. [ 3.053070@2] rdma_register success, handle 4 table_size 8192
  489. [ 3.058752@2] DI: di_probe allocate rdma channel 4.
  490. [ 3.063590@2] DI: DI hw version 2.
  491. [ 3.066956@2] 0x000000db:Y=db,U=0,V=0
  492. [ 3.070568@2] 0x000000dc:Y=dc,U=0,V=0
  493. [ 3.074196@2] 0x000000dd:Y=dd,U=0,V=0
  494. [ 3.077813@2] 0x000000de:Y=de,U=0,V=0
  495. [ 3.081441@2] 0x000000df:Y=df,U=0,V=0
  496. [ 3.085058@2] 0x000000e0:Y=e0,U=0,V=0
  497. [ 3.088681@2] 0x000000e1:Y=e1,U=0,V=0
  498. [ 3.092308@2] 0x000000e2:Y=e2,U=0,V=0
  499. [ 3.095925@2] 0x000000e3:Y=e3,U=0,V=0
  500. [ 3.099548@2] 0x000000f0:Y=f0,U=0,V=0
  501. [ 3.103178@2] 0x000000f1:Y=f1,U=0,V=0
  502. [ 3.106793@2] 0x000000f2:Y=f2,U=0,V=0
  503. [ 3.110415@2] 0x000000f3:Y=f3,U=0,V=0
  504. [ 3.114043@2] 0x000000f4:Y=f4,U=0,V=0
  505. [ 3.117661@2] 0x000000f5:Y=f5,U=0,V=0
  506. [ 3.121288@2] 0x000000f6:Y=f6,U=0,V=0
  507. [ 3.124907@2] 0x000000f7:Y=f7,U=0,V=0
  508. [ 3.128528@2] 0x000000f8:Y=f8,U=0,V=0
  509. [ 3.132155@2] 0x000000f9:Y=f9,U=0,V=0
  510. [ 3.135773@2] 0x000000fa:Y=fa,U=0,V=0
  511. [ 3.139395@2] 0x000000fb:Y=fb,U=0,V=0
  512. [ 3.143025@2] 0x000000fc:Y=fc,U=0,V=0
  513. [ 3.147232@2] efusekeynum: 4
  514. [ 3.149495@2] efusekeyname: mac offset: 0 size: 6
  515. [ 3.155920@2] efusekeyname: mac_bt offset: 6 size: 6
  516. [ 3.162273@2] efusekeyname: mac_wifi offset: 12 size: 6
  517. [ 3.168638@2] efusekeyname: usid offset: 18 size: 16
  518. [ 3.175405@2] efuse efuse.9: probe OK!
  519. [ 3.179099@2] key unify config unifykey-num is 14
  520. [ 3.183482@2] key unify fact unifykey-num is 14
  521. [ 3.187872@2] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
  522. [ 3.194934@2] 6unifykey: device unifykeys created ok
  523. [ 3.199741@2] 6aml_unifykeys_init done!
  524. [ 3.203502@2] PPMGRDRV: warn: ppmgr module init func called
  525. [ 3.209152@2] PPMGRDRV: err: ppmgr_driver_probe called
  526. [ 3.214106@2] ppmgr has 1 memory regions
  527. [ 3.218014@2] PPMGRDRV: info: ppmgr_dev major:234
  528. [ 3.222978@2] PPMGRDRV: info: ppmgr_probe done
  529. [ 3.227491@2] amlogic rfkill init
  530. [ 3.230394@2] enter bt_probe of_node
  531. [ 3.233899@2] not get gpio_en
  532. [ 3.236772@2] power on valid level is high
  533. [ 3.240654@2] bt: power_on_pin_OD = 0;
  534. [ 3.661238@2] audio_dsp: [dsp]register dsp to char divece(257)
  535. [ 3.662195@2] amaudio: amaudio: driver amaudio succuess!
  536. [ 3.667363@2] [RX]-hdmirx: hdmirx_init.
  537. [ 3.670499@2] ESM HLD: Initializing...
  538. [ 3.674237@2] ESM HLD: Registering device range 'esm_rx'...
  539. [ 3.679753@2] ESM HLD: Device range 'esm_rx' has been registered.
  540. [ 3.685774@2] ESM HLD: Creating class /sys/class/elliptic_rx...
  541. [ 3.691763@2] ESM HLD: The class /sys/class/elliptic_rx has been created.
  542. [ 3.698356@2] ESM HLD: Creating device 'esm_rx'...
  543. [ 3.703321@2] ESM HLD: Device 'esm_rx' has been created.
  544. [ 3.708361@2] ESM HLD: Done initializing the HLD driver.
  545. [ 3.713640@2] module init
  546. [ 3.716402@2]
  547. [ 3.716402@2] VECM probe start
  548. [ 3.721336@2] aml_vecm_probe: ok
  549. [ 3.724948@2] saradc c1108680.saradc: initialized by BL30
  550. [ 3.729501@2] saradc c1108680.saradc: calibration start:
  551. [ 3.734832@2] saradc c1108680.saradc: nominal=0, value=7
  552. [ 3.740059@2] saradc c1108680.saradc: nominal=256, value=231
  553. [ 3.745674@2] saradc c1108680.saradc: nominal=512, value=461
  554. [ 3.751278@2] saradc c1108680.saradc: nominal=768, value=691
  555. [ 3.756878@2] saradc c1108680.saradc: nominal=1023, value=922
  556. [ 3.762533@2] saradc c1108680.saradc: calibration end: coef=4559
  557. [ 3.768774@2] remote: Driver init
  558. [ 3.772199@2] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
  559. [ 3.778054@2] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
  560. [ 3.784811@2] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
  561. [ 3.790526@2] gpio-key gpio_keypad.47: start setup_timer
  562. [ 3.795747@2] gpio-key gpio_keypad.47: power key(116) registed.
  563. [ 3.801877@2] input: gpio_keypad as /devices/gpio_keypad.47/input/input0
  564. [ 3.808458@2] gpio-key gpio_keypad.47: gpio keypad register input device completed.
  565. [ 3.815876@2] input input0: gpio keypad major:231
  566. [ 3.820909@2] cpuinfo: probe done
  567. [ 3.824732@2] input: cec_input as /devices/virtual/input/input1
  568. [ 3.829933@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  569. [ 3.835788@2] cectx aocec: aml_cec_probe(): no hhi reg resource
  570. [ 3.841728@2] cectx aocec: aml_cec_probe(): can't find hdmirx
  571. [ 3.848460@2] cec: wake up flag:0
  572. [ 3.852339@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  573. [ 3.859206@2] aml-i2s-dai I2S.39: I2S Mic is in platform!
  574. [ 3.863088@2] aml_pcm_dai: pcm mode detection =1
  575. [ 3.891020@2] input input0: key 116 up
  576. [ 4.071216@2] aml_snd_card: headphone detection disable=1
  577. [ 4.071923@2] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
  578. [ 4.079055@2] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
  579. [ 4.085770@2] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0
  580. [ 4.092180@2] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
  581. [ 4.099121@2] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
  582. [ 4.106710@2] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  583. [ 4.115502@2] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
  584. [ 4.123084@2] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  585. [ 4.133960@2] TCP: cubic registered
  586. [ 4.135947@2] NET: Registered protocol family 10
  587. [ 4.140636@2] NET: Registered protocol family 17
  588. [ 4.144557@2] Key type dns_resolver registered
  589. [ 4.150130@2] Registering SWP/SWPB emulation handler
  590. [ 4.154523@2] regulator-dummy: disabling
  591. [ 4.859281@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  592. [ 4.861121@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  593. [ 4.866393@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  594. [ 4.874621@0] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  595. [ 4.880225@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  596. [ 4.887103@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  597. [ 4.894346@0] usb usb1: Product: xHCI Host Controller
  598. [ 4.899339@0] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  599. [ 4.904975@0] usb usb1: SerialNumber: xhci-hcd.0.auto
  600. [ 4.910621@2] hub 1-0:1.0: USB hub found
  601. [ 4.913906@2] hub 1-0:1.0: 2 ports detected
  602. [ 4.918148@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  603. [ 4.923610@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  604. [ 4.931458@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  605. [ 4.938236@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  606. [ 4.945587@2] usb usb2: Product: xHCI Host Controller
  607. [ 4.950570@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  608. [ 4.956186@2] usb usb2: SerialNumber: xhci-hcd.0.auto
  609. [ 4.961778@2] hub 2-0:1.0: USB hub found
  610. [ 4.965083@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  611. [ 4.972922@3] console [netcon0] enabled
  612. [ 4.976098@3] netconsole: network logging started
  613. [ 4.980793@3] aml_vrtc rtc.31: setting system clock to 2018-02-15 00:25:36 UTC (1518654336)
  614. [ 4.990174@3] cpufreq-scpi cpufreq-meson.7: enter cpufreq
  615. [ 4.994522@3] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
  616. [ 5.001078@3] gxbb_pm: enter meson_pm_probe!
  617. [ 5.004594@3] gxbb_pm: meson_pm_probe done
  618. [ 5.009512@3] cpucore_cooling_register, max_cpu_core_num:4
  619. [ 5.029513@3] aml_istbt_dev_ready NULL
  620. [ 5.029584@3] ALSA device list:
  621. [ 5.030754@3] #0: AML-M8AUDIO
  622. [ 5.034529@3] Freeing unused kernel memory: 908K (ffffffc0019e2000 - ffffffc001ac5000)
  623. [ 5.099718@0] fb: Frame buffer memory assigned at
  624. [ 5.099739@0] fb: 0, phy: 0x000000007e000000, vir:0xffffff8001d00000, size=24576K
  625. [ 5.099739@0]
  626. [ 5.099757@0] fb: ---------------clear fb0 memory ffffff8001d00000
  627. [ 5.123109@0] fb: osd[0] canvas.idx =0x40
  628. [ 5.123126@0] fb: osd[0] canvas.addr=0x7e000000
  629. [ 5.123133@0] fb: osd[0] canvas.width=7680
  630. [ 5.123139@0] fb: osd[0] canvas.height=3240
  631. [ 5.123146@0] fb: osd[0] frame.width=1920
  632. [ 5.123152@0] fb: osd[0] frame.height=1080
  633. [ 5.124361@0] fb: osd[0] canvas.idx =0x40
  634. [ 5.124365@0] fb: osd[0] canvas.addr=0x7e000000
  635. [ 5.124369@0] fb: osd[0] canvas.width=7680
  636. [ 5.124371@0] fb: osd[0] canvas.height=2160
  637. [ 5.124374@0] fb: osd[0] frame.width=1920
  638. [ 5.124376@0] fb: osd[0] frame.height=1080
  639. [ 5.147422@0] fb: Frame buffer memory assigned at
  640. [ 5.147448@0] fb: 1, phy: 0x000000007f800000, vir:0xffffff8003580000, size=1024K
  641. [ 5.147448@0]
  642. [ 5.147465@0] fb: fb1 open, logo index:1
  643. [ 5.184416@2] codec:free_alloced_keep_buffer (null). (null). (null)
  644. [ 5.184625@2] vfm_map_store:rm default
  645. [ 5.184625@2]
  646. [ 5.184722@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  647. [ 5.184722@2]
  648. [ 5.184851@2] fb: osd[0] enable: 1 (platform_init)
  649. [ 5.204387@2] fb: osd[1] enable: 0 (platform_init)
  650. [ 5.251156@1] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  651. [ 5.284230@2] Console: switching to colour frame buffer device 240x67
  652. [ 5.315701@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  653. [ 5.315719@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
  654. [ 5.392879@3] usb 1-1: New USB device found, idVendor=174c, idProduct=5136
  655. [ 5.392907@3] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  656. [ 5.392921@3] usb 1-1: Product: AS2105
  657. [ 5.392934@3] usb 1-1: Manufacturer: ASMedia
  658. [ 5.392947@3] usb 1-1: SerialNumber: 00000000000000000000
  659. [ 5.395481@3] usb-storage 1-1:1.0: USB Mass Storage device detected
  660. [ 5.396327@3] scsi0 : usb-storage 1-1:1.0
  661. [ 6.391690@3] scsi 0:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6
  662. [ 6.393077@3] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  663. [ 6.393512@3] sd 0:0:0:0: [sda] Write Protect is off
  664. [ 6.393521@3] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  665. [ 6.393943@3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  666. [ 6.749555@3] sda: sda1
  667. [ 6.751589@3] sd 0:0:0:0: [sda] Attached SCSI disk
  668. [ 7.156541@3] random: nonblocking pool is initialized
  669. [ 7.597015@0] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  670. [ 7.598037@0] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
  671. [ 7.629802@3] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  672. [ 14.607587@1] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  673. [ 14.607951@1] systemd[1]: Detected architecture arm64.
  674. [ 14.610293@1] systemd[1]: Set hostname to <LibreELEC>.
  675. [ 14.639810@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  676. [ 14.639839@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  677. [ 14.701604@1] systemd[1]: Created slice System Slice.
  678. [ 14.702113@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  679. [ 14.703226@1] systemd[1]: Listening on RPCbind Server Activation Socket.
  680. [ 14.703529@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  681. [ 14.704148@1] systemd[1]: Listening on Journal Socket (/dev/log).
  682. [ 14.704481@1] systemd[1]: Listening on udev Kernel Socket.
  683. [ 14.704822@1] systemd[1]: Created slice User and Session Slice.
  684. [ 14.705209@1] systemd[1]: Listening on udev Control Socket.
  685. [ 14.707376@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
  686. [ 14.707579@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  687. [ 14.707989@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  688. [ 14.710870@1] systemd[1]: Starting Show Version...
  689. [ 14.711214@1] systemd[1]: Reached target Paths.
  690. [ 14.711460@1] systemd[1]: Reached target RPC Port Mapper.
  691. [ 14.712086@1] systemd[1]: Listening on Journal Socket.
  692. [ 14.714687@1] systemd[1]: Mounting Variable Directory...
  693. [ 14.717802@1] systemd[1]: Starting Samba Configuration...
  694. [ 14.721286@1] systemd[1]: Mounting Kernel Debug File System...
  695. [ 14.721803@1] systemd[1]: Reached target Slices.
  696. [ 14.725460@1] systemd[1]: Mounting POSIX Message Queue File System...
  697. [ 14.732403@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  698. [ 14.732476@1] systemd[1]: Started Debug Shell on /dev/ttyS0.
  699. [ 14.738919@1] systemd[1]: Started Show Version.
  700. [ 14.739874@1] systemd[1]: Mounted Kernel Debug File System.
  701. [ 14.750776@1] systemd[1]: Mounted Variable Directory.
  702. [ 14.752790@1] systemd[1]: Started Samba Configuration.
  703. [ 14.753652@1] systemd[1]: Mounted POSIX Message Queue File System.
  704. [ 14.758194@1] systemd[1]: Starting Create kernel modules tree from overlays...
  705. [ 14.777336@1] kernel-overlays-setup: setup base modules
  706. [ 14.808626@1] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29
  707. [ 14.852916@1] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  708. [ 14.853109@1] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  709. [ 14.854333@1] kernel-overlays-setup: done
  710. [ 14.856094@3] systemd[1]: Started Create kernel modules tree from overlays.
  711. [ 14.858892@3] systemd[1]: Starting Mounting swapfile...
  712. [ 14.861664@3] systemd[1]: Starting udev Coldplug all Devices...
  713. [ 14.868049@0] systemd[1]: Starting Load Kernel Modules...
  714. [ 14.881676@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  715. [ 14.884543@0] systemd[1]: Starting Remount Root and Kernel File Systems...
  716. [ 14.887225@0] systemd[1]: Starting Setup machine-id...
  717. [ 14.891980@0] systemd[1]: Started Create list of required static device nodes for the current kernel.
  718. [ 14.907942@3] systemd[1]: Started Remount Root and Kernel File Systems.
  719. [ 14.913825@3] systemd[1]: Started Setup machine-id.
  720. [ 14.917176@3] systemd[1]: Starting Journal Service...
  721. [ 14.920196@3] systemd[1]: Starting Create Static Device Nodes in /dev...
  722. [ 14.921767@0] Linux video capture interface: v2.00
  723. [ 14.929662@3] systemd[1]: Started Mounting swapfile.
  724. [ 14.930527@3] systemd[1]: Reached target Swap.
  725. [ 14.933611@3] systemd[1]: Mounting Temporary Directory (/tmp)...
  726. [ 14.940757@2] amlvid:err: amlvideo_init called
  727. [ 14.940778@2] amlvid:err: amlvideo_create_instance called
  728. [ 14.940805@2] amlvid:err: v4l2_dev.name=:amlvideo-000
  729. [ 14.941577@2] amlvideo-000: V4L2 device registered as video10
  730. [ 14.946662@3] systemd[1]: Mounted Temporary Directory (/tmp).
  731. [ 14.948738@2] Registered IR keymap rc-empty
  732. [ 14.949522@2] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input2
  733. [ 14.950012@2] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
  734. [ 14.957234@1] IR RC5(x) protocol handler initialized
  735. [ 14.960161@3] systemd[1]: Started Create Static Device Nodes in /dev.
  736. [ 14.960835@2] IR NEC protocol handler initialized
  737. [ 14.960848@3] systemd[1]: Reached target Local File Systems (Pre).
  738. [ 14.961191@3] systemd[1]: Reached target Local File Systems.
  739. [ 14.963870@3] systemd[1]: Starting Rebuild Journal Catalog...
  740. [ 14.966078@1] IR JVC protocol handler initialized
  741. [ 14.969356@1] IR RC6 protocol handler initialized
  742. [ 14.970315@3] IR Sony protocol handler initialized
  743. [ 14.975798@1] meson-ir c8100580.meson-ir: receiver initialized
  744. [ 14.976269@1] IR SANYO protocol handler initialized
  745. [ 14.977903@3] systemd[1]: Started Rebuild Journal Catalog.
  746. [ 14.981574@2] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input3
  747. [ 14.981795@1] Triggered SDIO WiFi power on and bus rescan.
  748. [ 14.981836@1] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
  749. [ 14.982698@2] IR MCE Keyboard/mouse protocol handler initialized
  750. [ 14.985166@3] lirc_dev: IR Remote Control driver registered, major 229
  751. [ 14.988198@2] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
  752. [ 14.988214@2] IR LIRC bridge handler initialized
  753. [ 15.066229@3] systemd[1]: Started Journal Service.
  754. [ 15.089343@0] systemd-journald[1806]: Received request to flush runtime journal from PID 1
  755. [ 15.291104@1] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
  756. [ 15.602250@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  757. [ 15.602268@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  758. [ 15.602295@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  759. [ 15.603337@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  760. [ 15.603350@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  761. [ 15.603381@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  762. [ 15.608706@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  763. [ 15.608720@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  764. [ 15.608755@2] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  765. [ 15.652056@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  766. [ 15.652072@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  767. [ 15.652100@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  768. [ 15.653085@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  769. [ 15.653090@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  770. [ 15.653102@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  771. [ 15.657610@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  772. [ 15.657617@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  773. [ 15.657644@2] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  774. [ 15.693764@1] sdio: new high speed SDIO card at address 0001
  775. [ 15.693780@1] sdio: clock 50000000, 4-bit-bus-width
  776. [ 15.693780@1]
  777. [ 15.694297@1] [sdio_reinit] finish
  778. [ 16.106667@1] Console: switching to colour dummy device 80x25
  779. [ 16.140823@1] FD628: chars = ffffffc07a1edf30
  780. [ 16.140837@1] FD628: chars->length = 5
  781. [ 16.140842@1] FD628: char #0: 4
  782. [ 16.140845@1] FD628: char #1: 3
  783. [ 16.140849@1] FD628: char #2: 2
  784. [ 16.140852@1] FD628: char #3: 1
  785. [ 16.140855@1] FD628: char #4: 0
  786. [ 16.140860@1] FD628: dot_bits = ffffffc07a1edf60
  787. [ 16.140864@1] FD628: dot_bits->length = 7
  788. [ 16.140867@1] FD628: dot_bit #0: 0
  789. [ 16.140871@1] FD628: dot_bit #1: 1
  790. [ 16.140874@1] FD628: dot_bit #2: 2
  791. [ 16.140878@1] FD628: dot_bit #3: 3
  792. [ 16.140881@1] FD628: dot_bit #4: 4
  793. [ 16.140885@1] FD628: dot_bit #5: 5
  794. [ 16.140888@1] FD628: dot_bit #6: 6
  795. [ 16.140893@1] FD628: display_type = 1
  796. [ 16.527399@1] mali-utgard d00c0000.mali: max pp is 3
  797. [ 16.527419@1] mali-utgard d00c0000.mali: set min pp to default 1
  798. [ 16.527424@1] mali-utgard d00c0000.mali: min pp is 1
  799. [ 16.527431@1] mali-utgard d00c0000.mali: set min clk default to 0
  800. [ 16.527437@1] mali-utgard d00c0000.mali: min clk is 0
  801. [ 16.527512@1] mali-utgard d00c0000.mali: hiu io source 0xffffff80007fe000
  802. [ 16.527532@1] mali-utgard d00c0000.mali: hiu io source 0xffffff8000b6a000
  803. [ 16.527539@1] mali-utgard d00c0000.mali: num of pp used most of time 3
  804. [ 16.527545@1] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
  805. [ 16.527626@1] mali-utgard d00c0000.mali: max clk set 5
  806. [ 16.527633@1] mali-utgard d00c0000.mali: max clk is 5
  807. [ 16.527639@1] mali-utgard d00c0000.mali: turbo clk set to 6
  808. [ 16.527644@1] mali-utgard d00c0000.mali: turbo clk is 6
  809. [ 16.527650@1] mali-utgard d00c0000.mali: default clk is 3
  810. [ 16.527660@1] mali-utgard d00c0000.mali: ====================0====================
  811. [ 16.527660@1] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
  812. [ 16.527670@1] mali-utgard d00c0000.mali: ====================1====================
  813. [ 16.527670@1] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
  814. [ 16.527681@1] mali-utgard d00c0000.mali: ====================2====================
  815. [ 16.527681@1] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
  816. [ 16.527691@1] mali-utgard d00c0000.mali: ====================3====================
  817. [ 16.527691@1] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
  818. [ 16.527701@1] mali-utgard d00c0000.mali: ====================4====================
  819. [ 16.527701@1] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
  820. [ 16.527711@1] mali-utgard d00c0000.mali: ====================5====================
  821. [ 16.527711@1] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
  822. [ 16.527721@1] mali-utgard d00c0000.mali: ====================6====================
  823. [ 16.527721@1] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
  824. [ 16.527729@1] mali-utgard d00c0000.mali: clock dvfs table size is 7
  825. [ 16.538479@0] gpu cooling register okay with err=0
  826. [ 16.539729@0] gpu core cooling register okay with err=0
  827. [ 16.540620@0] Mali: Mali device driver loaded
  828. [ 16.872177@3] libphy: set driving length c
  829. [ 16.872286@3] libphy: set PLL minimum jitter
  830. [ 16.952174@3] libphy: set driving length c
  831. [ 16.952280@3] libphy: set PLL minimum jitter
  832. [ 17.024433@1] 8021q: 802.1Q VLAN Support v1.8
  833. [ 17.136652@2] cfg80211: Calling CRDA to update world regulatory domain
  834. [ 17.171590@2] generic_wifi_init_module
  835. [ 17.171641@2] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
  836. [ 17.271726@2] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
  837. [ 17.371783@2] sdio_reset_comm():
  838. [ 17.378361@2] aml_sd_emmc d0070000.sdio: exceeding card's volts
  839. [ 17.422184@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  840. [ 17.422204@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  841. [ 17.422255@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  842. [ 17.423289@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  843. [ 17.423309@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  844. [ 17.423364@2] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  845. [ 17.428035@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  846. [ 17.428058@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  847. [ 17.428105@2] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  848. [ 17.467793@2] [sdio_reinit] finish
  849. [ 17.568104@2]
  850. [ 17.568104@2] *** sta_cfg_set, /usr/lib/firmware/ssv6051/ssv6051-wifi.cfg ***
  851. [ 17.568104@2]
  852. [ 17.574129@3] ssv6xxx_sdio_init
  853. [ 17.574284@3] =======================================
  854. [ 17.574290@3] == RUN SDIO ==
  855. [ 17.574294@3] =======================================
  856. [ 17.574299@3] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz
  857. [ 17.594409@3] SSV6XXX_SDIO sdio:0001:1: vendor = 0x3030 device = 0x3030
  858. [ 17.604611@2] ssv6xxx_sdio_power_on
  859. [ 17.621318@2] SSV6XXX_SDIO sdio:0001:1: dataIOPort 0x10000 regIOPort 0x10020
  860. [ 17.622193@2] ssv6xxx_dev_probe(): ssv6200 device found !
  861. [ 17.622522@2] ssv6xxx_sdio_irq_disable
  862. [ 17.623410@2] MAC address from e-fuse
  863. [ 17.623426@2] EFUSE configuration
  864. [ 17.623430@2] Read efuse chip identity[75000000]
  865. [ 17.623434@2] r_calbration_result- 0
  866. [ 17.623437@2] sar_result- 0
  867. [ 17.623441@2] crystal_frequency_offset- 0
  868. [ 17.623444@2] tx_power_index_1- 0
  869. [ 17.623447@2] tx_power_index_2- 0
  870. [ 17.623454@2] MAC address - 3c:cf:5b:ab:45:45
  871. [ 17.623648@2] [MT-ENCRYPT]: create kthread ffffffc063727500 for CPU 0, ret = 0
  872. [ 17.623681@2] SSV WLAN driver ssv6200: Crypto task 2760 running with priority 120.
  873. [ 17.623720@2] [MT-ENCRYPT]: create kthread ffffffc063726a80 for CPU 1, ret = 0
  874. [ 17.623733@2] SSV WLAN driver ssv6200: Crypto task 2761 running with priority 120.
  875. [ 17.623756@2] [MT-ENCRYPT]: create kthread ffffffc0630ea000 for CPU 2, ret = 0
  876. [ 17.623767@2] SSV WLAN driver ssv6200: Crypto task 2762 running with priority 120.
  877. [ 17.623793@2] [MT-ENCRYPT]: create kthread ffffffc063134000 for CPU 3, ret = 0
  878. [ 17.623804@2] SSV WLAN driver ssv6200: Crypto task 2763 running with priority 120.
  879. [ 17.623836@2] SSV6XXX TX Task started.
  880. [ 17.623885@2] Pre-load cipher
  881. [ 17.623893@0] SSV6XXX RX Task started.
  882. [ 17.632163@0] mic hash allocate fail
  883. [ 17.632184@0] SSV6051P setting
  884. [ 17.632191@0] SSV6XXX_IQK_CFG_XTAL_24M
  885. [ 17.632196@0] SSV6051P setting [0x6C726C72]
  886. [ 17.632201@0] TX power setting 0x6c726c72
  887. [ 17.632204@0] Volt regulator LDO
  888. [ 17.634194@2] reset PLL
  889. [ 17.655600@2] ieee80211 phy0: Selected rate control algorithm 'ssv6xxx_rate_control'
  890. [ 17.659945@2] ieee80211 phy0: SSV6200 of South Silicon Valley
  891. [ 17.661786@0] SVN version 13940
  892. [ 17.661805@0] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/aml_s905/6051.Q0.1009.15.e10104/ssv6xxx
  893. [ 17.661810@0] COMPILER HOST icommsemi
  894. [ 17.661813@0] COMPILER DATE 12-02-2016-11:51:23
  895. [ 17.661817@0] COMPILER OS linux
  896. [ 17.661820@0] COMPILER OS ARCH x86_64-linux-gnu-thread-multi
  897. [ 18.059290@3] codec:vdec_create instance ffffff8003566000, total 1
  898. [ 18.162379@0] CHIP TAG: 2014012420010960
  899. [ 18.162665@0] CHIP ID: SSV6200A0-201311
  900. [ 18.163791@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 904 (4) at address 80000000.
  901. [ 18.163883@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80010000.
  902. [ 18.163967@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80020000.
  903. [ 18.164048@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80030000.
  904. [ 18.164133@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80040000.
  905. [ 18.164256@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80050000.
  906. [ 18.164337@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80060000.
  907. [ 18.164415@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80070000.
  908. [ 18.164499@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80080000.
  909. [ 18.164585@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80090000.
  910. [ 18.164665@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800a0000.
  911. [ 18.164745@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800b0000.
  912. [ 18.164823@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800c0000.
  913. [ 18.164902@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800d0000.
  914. [ 18.164981@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800e0000.
  915. [ 18.165061@2] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800f0000.
  916. [ 18.165116@2] [A] ssv6xxx_pbuf_free addr[80080000][8788]
  917. [ 18.165191@2] [A] ssv6xxx_pbuf_free addr[80090000][8789]
  918. [ 18.165269@2] [A] ssv6xxx_pbuf_free addr[800a0000][878a]
  919. [ 18.165346@2] [A] ssv6xxx_pbuf_free addr[800b0000][878b]
  920. [ 18.165422@2] [A] ssv6xxx_pbuf_free addr[800c0000][878c]
  921. [ 18.165501@2] [A] ssv6xxx_pbuf_free addr[800d0000][878d]
  922. [ 18.165532@2] 0x800e0000
  923. [ 18.165586@2] [A] ssv6xxx_pbuf_free addr[800f0000][878f]
  924. [ 18.208632@2] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc]
  925. [ 18.212060@2] Writing firmware to SSV6XXX...
  926. [ 18.222343@2] (block_count << 16) = 4f0000,reg =4f0000
  927. [ 18.222383@2] Firmware "/usr/lib/firmware/ssv6051/ssv6051-sw.bin" loaded
  928. [ 18.281258@2] Firmware check OK.da0000 = da0000
  929. [ 18.341059@2] ssv6xxx_set_sdio_clk:set sdio clk 50000000Hz
  930. [ 18.361096@2] Firmware name sh->cfg.firmware_path=/usr/lib/firmware/ssv6051/ssv6051-sw.bin
  931. [ 18.361291@2] Firmware version 12978
  932. [ 18.361297@2] # Do init_cali (iq)
  933. [ 18.411626@2] ssv6200_start(): current channel: 1,sc->ps_status=0
  934. [ 18.413598@2] [I] ssv6200_add_interface():
  935. [ 18.413614@2] ssv6xxx_config_vif_res id[0].
  936. [ 18.413631@2] SSV WLAN driver ssv6200: VIF 3c:cf:5b:ab:45:45 of type 2 is added.
  937. [ 18.413692@2] BSS Changed use_short_preamble[0]
  938. [ 18.413697@2] BSS_CHANGED_ERP_SLOT: use_short_slot[0]
  939. [ 18.413962@2] NL80211_IFTYPE_STATION!!
  940. [ 18.413969@2] [I] ssv6200_bss_info_changed(): leave
  941. [ 18.413999@2] [I] sv6200_conf_tx vif[0] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  942. [ 18.414087@2] [I] sv6200_conf_tx vif[0] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  943. [ 18.414172@2] [I] sv6200_conf_tx vif[0] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  944. [ 18.414256@2] [I] sv6200_conf_tx vif[0] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  945. [ 18.414338@2] NL80211_IFTYPE_STATION!!
  946. [ 18.414342@2] [I] ssv6200_bss_info_changed(): leave
  947. [ 18.414350@2] Disable IEEE80211_CONF_PS ps_aid=0
  948. [ 18.415042@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  949. [ 18.470524@2] --------------ssv6200_sw_scan_start():
  950. [ 18.533014@0] ==============ssv6200_sw_scan_complete():
  951. [ 19.751805@2] wlan0: authenticate with 2c:30:33:93:30:6e
  952. [ 19.751841@2] ssv6xxx_rate_alloc_sta(): use index 0
  953. [ 19.753692@2] NL80211_IFTYPE_STATION!!
  954. [ 19.753706@2] [I] ssv6200_bss_info_changed(): leave
  955. [ 19.753711@2] NL80211_IFTYPE_STATION!!
  956. [ 19.753715@2] [I] ssv6200_bss_info_changed(): leave
  957. [ 19.753772@2] BSS_CHANGED_BSSID: 2c:30:33:93:30:6e
  958. [ 19.753776@2] ssv6xxx_rc_update_basic_rate!!
  959. [ 19.754445@2] NL80211_IFTYPE_STATION!!
  960. [ 19.754450@2] [I] ssv6200_bss_info_changed(): leave
  961. [ 19.754487@2] wlan0: send auth to 2c:30:33:93:30:6e (try 1/3)
  962. [ 19.769634@0] wlan0: authenticated
  963. [ 19.771093@3] wlan0: associate with 2c:30:33:93:30:6e (try 1/3)
  964. [ 19.774942@3] wlan0: RX AssocResp from 2c:30:33:93:30:6e (capab=0x1411 status=0 aid=2)
  965. [ 19.774970@3] [I] ssv6xxx_rate_update_rc_type():
  966. [ 19.774974@3] [RC init ]HT support wsid
  967. [ 19.774979@3] [RC]HT duration[0][13295]
  968. [ 19.774983@3] [RC]HT duration[1][6650]
  969. [ 19.774987@3] [RC]HT duration[2][4432]
  970. [ 19.774991@3] [RC]HT duration[3][3327]
  971. [ 19.774994@3] [RC]HT duration[4][2218]
  972. [ 19.774998@3] [RC]HT duration[5][1664]
  973. [ 19.775002@3] [RC]HT duration[6][1480]
  974. [ 19.775005@3] [RC]HT duration[7][1332]
  975. [ 19.775250@3] [RC]Init perfect_tx_time[0][1901]
  976. [ 19.775255@3] [RC]Init perfect_tx_time[1][1041]
  977. [ 19.775259@3] [RC]Init perfect_tx_time[2][749]
  978. [ 19.775263@3] [RC]Init perfect_tx_time[3][609]
  979. [ 19.775266@3] [RC]Init perfect_tx_time[4][461]
  980. [ 19.775270@3] [RC]Init perfect_tx_time[5][393]
  981. [ 19.775274@3] [RC]Init perfect_tx_time[6][369]
  982. [ 19.775278@3] [RC]Init perfect_tx_time[7][349]
  983. [ 19.775287@3] [I] ssv6200_sta_add(): vif[0] rc_wsid[0] rc_idx[0]
  984. [ 19.775624@3] SSV WLAN driver ssv6200: Creating AMPDU TX debugfs.
  985. [ 19.776848@3] cmd=5 for fw wsid list, wsid 0
  986. [ 19.776948@3] hw_update_watch_wsid: wsid_idx = 0
  987. [ 19.776959@3] cmd=6 for fw wsid list, wsid 0
  988. [ 19.776987@3] hw_update_watch_wsid: wsid_idx = 0
  989. [ 19.776997@3] Add 2c:30:33:93:30:6e to VIF 0 sw_idx=0, wsid=0
  990. [ 19.777010@3] [I] sv6200_conf_tx vif[0] qos[0] queue[2] aifsn[3] cwmin[15] cwmax[1023] txop[0]
  991. [ 19.777102@3] [I] sv6200_conf_tx vif[0] qos[0] queue[3] aifsn[7] cwmin[15] cwmax[1023] txop[0]
  992. [ 19.777187@3] [I] sv6200_conf_tx vif[0] qos[0] queue[1] aifsn[2] cwmin[7] cwmax[15] txop[94]
  993. [ 19.777270@3] [I] sv6200_conf_tx vif[0] qos[0] queue[0] aifsn[2] cwmin[3] cwmax[7] txop[47]
  994. [ 19.777357@3] BSS_CHANGED_ERP_SLOT: use_short_slot[1]
  995. [ 19.777421@3] NL80211_IFTYPE_STATION!!
  996. [ 19.777425@3] !!info->aid = 2
  997. [ 19.777430@3] [I] ssv6200_bss_info_changed(): leave
  998. [ 19.777466@3] wlan0: associated
  999. [ 19.777567@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1000. [ 19.799825@3] wlan0: Limiting TX power to 36 (36 - 0) dBm as advertised by 2c:30:33:93:30:6e
  1001. [ 19.799841@3] BSS_CHANGED_HT: Untreated!!
  1002. [ 19.799844@3] NL80211_IFTYPE_STATION!!
  1003. [ 19.799848@3] [I] ssv6200_bss_info_changed(): leave
  1004. [ 19.845290@3] IEEE80211_AMPDU_RX_START 2C:30:33:93:30:6E 0.
  1005. [ 19.929714@0] SSV WLAN driver ssv6200: Set key VIF 0 VIF type 2 STA 0 algorithm = 4, key->keyidx = 0, cmd = 0
  1006. [ 19.929732@0] SSV WLAN driver ssv6200: Use WPA2 HW security mode only.
  1007. [ 19.929738@0] first sta idx 0, current sta idx 0
  1008. [ 19.929749@0] Found aes in driver aes-generic (M (null)).
  1009. [ 19.929758@0] SSV WLAN driver ssv6200: Use driver's CCMP cipher OK!
  1010. [ 19.929901@2] ==>ssv6200_hw_set_pair_type: write cipher type 4 into hw
  1011. [ 19.929911@2] SSV WLAN driver ssv6200: Set STA 0's pair-wise key of 16 bytes.
  1012. [ 19.930173@2] cmd=5 for fw wsid list, wsid 0
  1013. [ 19.930208@2] hw_update_watch_wsid: wsid_idx = 0
  1014. [ 19.930218@2] set hw wsid 0 cipher mode to HW cipher for pairwise key
  1015. [ 19.930223@2] sta: hw_en:0, sw_en:1, hw_de:1, sw_de:0,
  1016. [ 19.930228@2] vif: hw_en:0, sw_en:0, hw_de:0, sw_de:0, use_mac80211 0, valid:0
  1017. [ 19.930232@2] SET KEY 0
  1018. [ 19.930846@2] SSV WLAN driver ssv6200: Set key VIF 0 VIF type 2 STA -1 algorithm = 4, key->keyidx = 1, cmd = 0
  1019. [ 19.930862@2] SSV WLAN driver ssv6200: Use WPA2 HW security mode only.
  1020. [ 19.930869@2] SSV WLAN driver ssv6200: VIF 0 uses HW CCMP cipher for group.
  1021. [ 19.930984@2] Set group key type 4
  1022. [ 19.931038@2] SSV WLAN driver ssv6200: Setting VIF 0 group key 1 of length 16 to WSID -1.
  1023. [ 19.931049@2] SSV WLAN driver ssv6200: Write group key 1 to VIF 0 to 80000000
  1024. [ 19.931364@2] cmd=6 for fw wsid list, wsid 0
  1025. [ 19.931376@2] set hw wsid 0 cipher mode to HW cipher for group key
  1026. [ 19.931382@2] vif: hw_en:1, sw_en:0, hw_de:1, sw_de:0, use_mac80211 0, valid:1
  1027. [ 19.931386@2] SET KEY 0
  1028. [ 19.971050@3] AMPDU_TX_START 2C:30:33:93:30:6E 0.
  1029. [ 19.981960@3] AMPDU_TX_OPERATIONAL 2C:30:33:93:30:6E 0.
  1030. [ 19.981976@3] ssv6200_ampdu_tx_operation:buffer_size=64
  1031. [ 20.331534@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1032. [ 20.331610@1] aml_spdif_dai: share the same clock
  1033. [ 20.331623@1] aml_audio_hw: IEC958 PCM32
  1034. [ 20.331631@1] hdmitx: audio: aout notify rate 44100
  1035. [ 20.331635@1] hdmitx: audio: aout notify size 32
  1036. [ 20.331641@1] hdmitx: audio: aout notify format CT_PCM
  1037. [ 20.331646@1] hdmtix: set audio
  1038. [ 20.331662@1] hdmitx tx_aud_src = 0
  1039. [ 20.331691@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  1040. [ 20.331696@1] hdmitx aud_n_para = 6272
  1041. [ 20.331716@1] hdmitx set channel status
  1042. [ 20.331778@1] hdmitx: audio: Audio Type: PCM
  1043. [ 20.331783@1] hdmitx: audio: set audio param
  1044. [ 20.331794@1] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1045. [ 20.332091@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1046. [ 20.332100@3] aml_spdif_dai: share the same clock
  1047. [ 20.332108@3] aml_audio_hw: IEC958 PCM32
  1048. [ 20.332115@3] hdmitx: audio: aout notify rate 44100
  1049. [ 20.332119@3] hdmitx: audio: aout notify size 32
  1050. [ 20.332123@3] hdmitx: audio: no update
  1051. [ 20.332132@3] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1052. [ 20.332330@3] channel count should be 8, we got 2 aborting
  1053. [ 20.334939@3] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
  1054. [ 20.334961@3] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
  1055. [ 20.429533@3] vout_serve: vmode set to null
  1056. [ 20.429581@3] fb: current vmode=1080p50hz, cmd: 0x50000
  1057. [ 20.429591@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
  1058. [ 20.429598@3] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
  1059. [ 20.429613@3] tv_vout: 3Invalid video output modes.
  1060. [ 20.429618@3] tv_vout: new mode =null set ok
  1061. [ 20.429623@3] vout_serve: vinfo mode is: null
  1062. [ 20.429627@3] vout_serve: new mode null set ok
  1063. [ 20.429642@3] hdmitx: edid: not find mapped vic
  1064. [ 20.429651@3] hdmitx: video: get current mode: null
  1065. [ 20.429656@3] hdmitx: update rx hdr info 0
  1066. [ 20.429660@3] hdmitx: update physcial size: 1540 870
  1067. [ 20.429665@3] hdmitx: video: null not valid hdmi mode
  1068. [ 20.429693@3] fb: current vmode=null, cmd: 0x10000
  1069. [ 20.444369@3] hdmitx: set frac_rate_policy as 0
  1070. [ 20.444405@3] vout_serve: vmode set to 1080p50hz
  1071. [ 20.444429@3] vout_serve: disable HDMI PHY as soon as possible
  1072. [ 20.444436@3] fb: current vmode=null, cmd: 0x50000
  1073. [ 20.444443@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=18
  1074. [ 20.444449@3] tv_vout: mode is 18,sync_duration_den=1,sync_duration_num=50
  1075. [ 20.444463@3] tv_vout: TV mode 1080p50hz selected.
  1076. [ 20.444470@3]
  1077. [ 20.444470@3] vdac_enable: on:0,module_sel:8
  1078. [ 20.444482@3]
  1079. [ 20.444482@3] vdac_enable: on:0,module_sel:8
  1080. [ 20.444493@3] tv_vout: new mode =1080p50hz set ok
  1081. [ 20.444497@3] vout_serve: vinfo mode is: 1080p50hz
  1082. [ 20.444501@3] vout_serve: new mode 1080p50hz set ok
  1083. [ 20.444520@3] hdmitx: video: get current mode: 1080p50hz
  1084. [ 20.444524@3] hdmitx: update rx hdr info 0
  1085. [ 20.444528@3] hdmitx: update physcial size: 1540 870
  1086. [ 20.444579@3] hdmitx: system: already init VIC = 0 Now VIC = 31
  1087. [ 20.444585@3] hdmitx: rx no SCDC present indicator
  1088. [ 20.446597@3] hdmitx: ddc rd8b error 0x54 0x01
  1089. [ 20.446717@0] hdmitx: system: irq 80000001
  1090. [ 20.446743@0] Start = 0x10000100 End = 0x100001ff
  1091. [ 20.446755@0] [0x10000104]: 0x00000001
  1092. [ 20.446761@0] [0x10000105]: 0x00000003
  1093. [ 20.446915@0] [0x10000170]: 0x00000004
  1094. [ 20.446942@0] [0x10000180]: 0x000000ff
  1095. [ 20.446947@0] [0x10000181]: 0x000000ff
  1096. [ 20.446952@0] [0x10000182]: 0x00000003
  1097. [ 20.446958@0] [0x10000183]: 0x00000007
  1098. [ 20.446963@0] [0x10000184]: 0x0000003f
  1099. [ 20.446968@0] [0x10000185]: 0x00000002
  1100. [ 20.446975@0] [0x10000187]: 0x000000ff
  1101. [ 20.446980@0] [0x10000188]: 0x00000003
  1102. [ 20.448609@3] hdmitx: ddc rd8b error 0x54 0x01
  1103. [ 20.448616@3] hdmirx version is 1.4 or below
  1104. [ 20.448620@3] hdmitx div40: 0
  1105. [ 20.471015@3] hdmitx: system: set mode VIC 31 (cd0,cs0,pm1,vd0,1)
  1106. [ 20.471028@3] hdmitx: system: set pll
  1107. [ 20.471031@3] hdmitx: system: param->VIC:31
  1108. [ 20.471037@3] hdmitx: set clk: VIC = 31 cd = 4 frac_rate = 0
  1109. [ 20.471049@3] hdmitx: 1920x1080p50hz doesn't have frac_rate
  1110. [ 20.471058@3] config HPLL = 2970000
  1111. [ 20.471081@3] HPLL: 0xc000027b
  1112. [ 20.471085@3] config HPLL done
  1113. [ 20.471095@3] set_hpll_od3_clk_div[437] div = 6
  1114. [ 20.471104@3] j = 4 vid_clk_div = 1
  1115. [ 20.471116@3] hdmitx: set enc for VIC: 31
  1116. [ 20.471137@3] hdmitx_set_hw[4947] set VIC = 31
  1117. [ 20.471145@0] hdmitx: system: irq 80000001
  1118. [ 20.471200@0] Start = 0x10000100 End = 0x100001ff
  1119. [ 20.471217@0] [0x10000104]: 0x00000001
  1120. [ 20.471537@0] hdmitx: system: irq 80000001
  1121. [ 20.471555@0] [0x10000180]: 0x000000ff
  1122. [ 20.471561@0] [0x10000181]: 0x000000ff
  1123. [ 20.471566@0] [0x10000182]: 0x00000003
  1124. [ 20.471572@0] [0x10000183]: 0x00000007
  1125. [ 20.471577@0] [0x10000184]: 0x0000003f
  1126. [ 20.471582@0] [0x10000185]: 0x00000002
  1127. [ 20.471589@0] [0x10000187]: 0x000000ff
  1128. [ 20.471594@0] [0x10000188]: 0x00000003
  1129. [ 20.471785@0] Start = 0x10000100 End = 0x100001ff
  1130. [ 20.471796@0] [0x10000104]: 0x00000001
  1131. [ 20.471993@0] [0x10000180]: 0x000000ff
  1132. [ 20.471999@0] [0x10000181]: 0x000000ff
  1133. [ 20.472004@0] [0x10000182]: 0x00000003
  1134. [ 20.472009@0] [0x10000183]: 0x00000007
  1135. [ 20.472015@0] [0x10000184]: 0x0000003f
  1136. [ 20.472020@0] [0x10000185]: 0x00000002
  1137. [ 20.472029@0] [0x10000187]: 0x000000ff
  1138. [ 20.472035@0] [0x10000188]: 0x00000003
  1139. [ 20.483024@3] hdmitx: ddc w1b error 0x54 0x20 0x00
  1140. [ 20.485045@3] hdmitx: ddc w1b error 0x54 0x20 0x00
  1141. [ 20.487056@3] hdmitx: ddc rd8b error 0x54 0x21
  1142. [ 20.603092@3] hdmitx: system: PHY Setting Done
  1143. [ 20.607170@3] Sink is HDMI device
  1144. [ 20.607220@3] hdmitx: system: packet: can't get vendor data
  1145. [ 20.607243@3] 1080p50hz 50 1
  1146. [ 20.607270@3] 1080p50hz 50 1
  1147. [ 20.607289@3] hdmtix: set audio
  1148. [ 20.607327@3] hdmitx tx_aud_src = 0
  1149. [ 20.607420@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  1150. [ 20.607439@3] hdmitx aud_n_para = 6272
  1151. [ 20.607505@3] hdmitx set channel status
  1152. [ 20.607676@3] hdmitx: audio: Audio Type: PCM
  1153. [ 20.607700@3] fb: current vmode=1080p50hz, cmd: 0x10000
  1154. [ 20.880840@2] vout_serve: vmode set to null
  1155. [ 20.880884@2] vout_serve: disable HDMI PHY as soon as possible
  1156. [ 20.880893@2] fb: current vmode=1080p50hz, cmd: 0x50000
  1157. [ 20.880902@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
  1158. [ 20.880909@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
  1159. [ 20.880925@2] tv_vout: 3Invalid video output modes.
  1160. [ 20.880930@2] tv_vout: new mode =null set ok
  1161. [ 20.880934@2] vout_serve: vinfo mode is: null
  1162. [ 20.880938@2] vout_serve: new mode null set ok
  1163. [ 20.880952@2] hdmitx: edid: not find mapped vic
  1164. [ 20.880960@2] hdmitx: video: get current mode: null
  1165. [ 20.880965@2] hdmitx: update rx hdr info 0
  1166. [ 20.880969@2] hdmitx: update physcial size: 1540 870
  1167. [ 20.880973@2] hdmitx: video: null not valid hdmi mode
  1168. [ 20.881084@2] fb: current vmode=null, cmd: 0x10000
  1169. [ 20.884358@0] hdmitx: set frac_rate_policy as 0
  1170. [ 20.884392@0] vout_serve: vmode set to 1080p50hz
  1171. [ 20.884429@0] vout_serve: disable HDMI PHY as soon as possible
  1172. [ 20.884436@0] fb: current vmode=null, cmd: 0x50000
  1173. [ 20.884443@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=18
  1174. [ 20.884449@0] tv_vout: mode is 18,sync_duration_den=1,sync_duration_num=50
  1175. [ 20.884464@0] tv_vout: TV mode 1080p50hz selected.
  1176. [ 20.884470@0]
  1177. [ 20.884470@0] vdac_enable: on:0,module_sel:8
  1178. [ 20.884482@0]
  1179. [ 20.884482@0] vdac_enable: on:0,module_sel:8
  1180. [ 20.884492@0] tv_vout: new mode =1080p50hz set ok
  1181. [ 20.884497@0] vout_serve: vinfo mode is: 1080p50hz
  1182. [ 20.884501@0] vout_serve: new mode 1080p50hz set ok
  1183. [ 20.884520@0] hdmitx: video: get current mode: 1080p50hz
  1184. [ 20.884524@0] hdmitx: update rx hdr info 0
  1185. [ 20.884528@0] hdmitx: update physcial size: 1540 870
  1186. [ 20.884582@0] hdmitx: system: already init VIC = 0 Now VIC = 31
  1187. [ 20.884589@0] hdmitx: rx no SCDC present indicator
  1188. [ 20.886601@0] hdmitx: ddc rd8b error 0x54 0x01
  1189. [ 20.888613@0] hdmitx: ddc rd8b error 0x54 0x01
  1190. [ 20.888620@0] hdmirx version is 1.4 or below
  1191. [ 20.888624@0] hdmitx div40: 0
  1192. [ 20.911037@0] hdmitx: system: set mode VIC 31 (cd0,cs0,pm1,vd0,1)
  1193. [ 20.911048@0] hdmitx: system: set pll
  1194. [ 20.911052@0] hdmitx: system: param->VIC:31
  1195. [ 20.911058@0] hdmitx: set clk: VIC = 31 cd = 4 frac_rate = 0
  1196. [ 20.911068@0] hdmitx: 1920x1080p50hz doesn't have frac_rate
  1197. [ 20.911076@0] config HPLL = 2970000
  1198. [ 20.911099@0] HPLL: 0xc000027b
  1199. [ 20.911102@0] config HPLL done
  1200. [ 20.911113@0] set_hpll_od3_clk_div[437] div = 6
  1201. [ 20.911123@0] j = 4 vid_clk_div = 1
  1202. [ 20.911135@0] hdmitx: set enc for VIC: 31
  1203. [ 20.911187@0] hdmitx_set_hw[4947] set VIC = 31
  1204. [ 20.911385@0] hdmitx: system: irq 80000001
  1205. [ 20.923020@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1206. [ 20.925038@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1207. [ 20.927050@0] hdmitx: ddc rd8b error 0x54 0x21
  1208. [ 20.927149@0] Start = 0x10000100 End = 0x100001ff
  1209. [ 20.927167@0] [0x10000104]: 0x00000001
  1210. [ 20.927365@0] [0x10000180]: 0x000000ff
  1211. [ 20.927371@0] [0x10000181]: 0x000000ff
  1212. [ 20.927376@0] [0x10000182]: 0x00000003
  1213. [ 20.927382@0] [0x10000183]: 0x00000007
  1214. [ 20.927387@0] [0x10000184]: 0x0000003f
  1215. [ 20.927392@0] [0x10000185]: 0x00000002
  1216. [ 20.927399@0] [0x10000187]: 0x000000ff
  1217. [ 20.927404@0] [0x10000188]: 0x00000003
  1218. [ 21.015857@0] NL80211_IFTYPE_STATION!!
  1219. [ 21.015892@0] [I] ssv6200_bss_info_changed(): leave
  1220. [ 21.043086@0] hdmitx: system: PHY Setting Done
  1221. [ 21.047160@0] Sink is HDMI device
  1222. [ 21.047197@0] hdmitx: system: packet: can't get vendor data
  1223. [ 21.047209@0] 1080p50hz 50 1
  1224. [ 21.047224@0] 1080p50hz 50 1
  1225. [ 21.047234@0] hdmtix: set audio
  1226. [ 21.047255@0] hdmitx tx_aud_src = 0
  1227. [ 21.047306@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  1228. [ 21.047318@0] hdmitx aud_n_para = 6272
  1229. [ 21.047354@0] hdmitx set channel status
  1230. [ 21.047456@0] hdmitx: audio: Audio Type: PCM
  1231. [ 21.047518@0] fb: current vmode=1080p50hz, cmd: 0x10000
  1232. [ 49.945075@2] --------------ssv6200_sw_scan_start():
  1233. [ 54.537964@2] ==============ssv6200_sw_scan_complete():
  1234. [ 84.564105@2] --------------ssv6200_sw_scan_start():
  1235. [ 89.459245@2] ==============ssv6200_sw_scan_complete():
  1236. [ 92.791709@1] IEEE80211_AMPDU_RX_START 2C:30:33:93:30:6E 0.
  1237. [ 119.477582@1] --------------ssv6200_sw_scan_start():
  1238. [ 124.380226@2] ==============ssv6200_sw_scan_complete():
  1239. [ 125.381263@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
  1240. [ 125.381319@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
  1241. [ 125.381555@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1242. [ 125.381605@0] aml_spdif_dai: share the same clock
  1243. [ 125.381639@0] aml_audio_hw: IEC958 PCM32
  1244. [ 125.381665@0] hdmitx: audio: aout notify rate 44100
  1245. [ 125.381684@0] hdmitx: audio: aout notify size 32
  1246. [ 125.381700@0] hdmitx: audio: no update
  1247. [ 125.381729@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1248. [ 135.233858@0] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
  1249. [ 135.233894@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
  1250. [ 154.391245@2] --------------ssv6200_sw_scan_start():
  1251. [ 159.290511@2] ==============ssv6200_sw_scan_complete():
  1252. [ 189.302963@2] --------------ssv6200_sw_scan_start():
  1253. [ 193.898973@2] ==============ssv6200_sw_scan_complete():
  1254. [ 216.874097@0] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
  1255. [ 216.874136@0] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
  1256. [ 216.874258@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1257. [ 216.874286@0] aml_spdif_dai: share the same clock
  1258. [ 216.874306@0] aml_audio_hw: IEC958 PCM32
  1259. [ 216.874321@0] hdmitx: audio: aout notify rate 44100
  1260. [ 216.874331@0] hdmitx: audio: aout notify size 32
  1261. [ 216.874339@0] hdmitx: audio: no update
  1262. [ 216.874353@0] aml_snd_m8_card aml_m8_snd.46: i2s/958 same source
  1263. [ 223.905449@2] --------------ssv6200_sw_scan_start():
  1264. [ 228.805931@2] ==============ssv6200_sw_scan_complete():
  1265. [ 258.816022@2] --------------ssv6200_sw_scan_start():
  1266. [ 263.407982@2] ==============ssv6200_sw_scan_complete():
  1267. [ 266.414232@1] IEEE80211_AMPDU_RX_START 2C:30:33:93:30:6E 0.
  1268. [ 293.413156@2] --------------ssv6200_sw_scan_start():
  1269. [ 298.005537@2] ==============ssv6200_sw_scan_complete():
  1270. [ 302.876765@1] IEEE80211_AMPDU_RX_START 2C:30:33:93:30:6E 0.
  1271. [ 328.014486@2] --------------ssv6200_sw_scan_start():
  1272. [ 332.911790@2] ==============ssv6200_sw_scan_complete():
  1273. [ 362.923786@2] --------------ssv6200_sw_scan_start():
  1274. [ 367.818578@2] ==============ssv6200_sw_scan_complete():
  1275. [ 381.932300@1] IEEE80211_AMPDU_RX_START 2C:30:33:93:30:6E 0.
  1276. LibreELEC:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!