SHARE
TWEET

Untitled

a guest Mar 3rd, 2019 74 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ; Configuration file for Duet WiFi (firmware version 1.21)
  2. ; executed by the firmware on start-up
  3. ;
  4. ; generated by RepRapFirmware Configuration Tool v2 on Sun Mar 03 2019 00:52:39 GMT-0600 (Central Standard Time)
  5.  
  6. ; General preferences
  7. G90                                                ; Send absolute coordinates...
  8. M83                                                ; ...but relative extruder moves
  9. M665 R200 L215 B180 H287                           ; Set delta radius, diagonal rod length, printable radius and homed height
  10. M666 X0 Y0 Z0                                      ; Put your endstop adjustments here, or let auto calibration find them
  11.  
  12. ; Network
  13. M550 P"duet2wifi"                                  ; Set machine name
  14. M552 S0                                            ; Enable network
  15. M552 S2                                            ;
  16. ;*** Access point is configured manually via M587
  17. M586 P0 S1                                         ; Enable HTTP
  18. M586 P1 S0                                         ; Disable FTP
  19. M586 P2 S0                                         ; Disable Telnet
  20.  
  21. ; Drives
  22. M569 P0 S1                                         ; Drive 0 goes forwards
  23. M569 P1 S1                                         ; Drive 1 goes forwards
  24. M569 P2 S1                                         ; Drive 2 goes forwards
  25. M569 P3 S1                                         ; Drive 3 goes forwards
  26. ;M350 X64 Y64 Z64 E16 I1                            ; Configure microstepping with interpolation
  27. ;M92 X320.00 Y320.00 Z320.00 E96.00                    ; Set steps per mm
  28. M350 X16 Y16 Z16 E16 I1
  29. M92 X80.00 Y80.00 Z80.00 E96.00
  30. M566 X1800.00 Y1800.00 Z1800.00 E1200.00           ; Set maximum instantaneous speed changes (mm/min)
  31. M203 X30000.00 Y30000.00 Z30000.00 E1200.00        ; Set maximum speeds (mm/min)
  32. M201 X1000.00 Y1000.00 Z1000.00 E1000.00           ; Set accelerations (mm/s^2)
  33. M906 X1700.00 Y1700.00 Z1700.00 E1700.00 I30       ; Set motor currents (mA) and motor idle factor in per cent
  34. M84 S30                                            ; Set idle timeout
  35.  
  36. ; Axis Limits
  37. M208 Z0 S1                                         ; Set minimum Z
  38.  
  39. ; Endstops
  40. M574 X2 Y2 Z2 S1                                      ; Set active high endstops
  41.  
  42. ; Z-Probe
  43. ;M574 Z2 S2                                         ; Set endstops controlled by probe
  44. M558 P8 R0.4 H5 F1200 T6000                  ; Set Z probe type to effector and the dive height + speeds
  45. G31 P100 X0 Y0 Z20                          ; Set Z probe trigger value, offset and trigger height
  46. M557 R85 S20                                 ; Define mesh grid
  47.  
  48. ; Heaters
  49. M307 H0 B0 S1.00                                   ; Disable bang-bang mode for the bed heater and set PWM limit
  50. M305 P0 T100000 B4138 R4700                        ; Set thermistor + ADC parameters for heater 0
  51. M143 H0 S120                                       ; Set temperature limit for heater 0 to 120C
  52. M305 P1 T100000 B4138 R4700                        ; Set thermistor + ADC parameters for heater 1
  53. M143 H1 S280                                       ; Set temperature limit for heater 1 to 280C
  54.  
  55. ; Fans
  56. M106 P0 S0.3 I0 F500 H-1                           ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
  57. M106 P1 S1 I0 F500 H1 T45                          ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
  58.  
  59. ; Tools
  60. M563 P0 D0 H1                                      ; Define tool 0
  61. G10 P0 X0 Y0 Z0                                    ; Set tool 0 axis offsets
  62. G10 P0 R0 S0                                       ; Set initial tool 0 active and standby temperatures to 0C
  63.  
  64. ; Automatic power saving
  65. M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; Set voltage thresholds and actions to run on power loss
  66.  
  67. ; Custom settings are not configured
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top