API tools faq
paste
icez

Untitled

icez
Jul 8th, 2013
154
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.53 KB | None | 0 0
raw download clone embed print report
  1. smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  2. Home page is http://smartmontools.sourceforge.net/
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: WDC WD1602ABKS-18N8A0
  6. Serial Number: WD-WCAT24785134
  7. Firmware Version: 02.03B04
  8. User Capacity: 160,000,000,000 bytes
  9. Device is: Not in smartctl database [for details use: -P showall]
  10. ATA Version is: 8
  11. ATA Standard is: Exact ATA specification draft version not indicated
  12. Local Time is: Mon Jul 8 22:52:12 2013 ICT
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x84) Offline data collection activity
  21. was suspended by an interrupting command from host.
  22. Auto Offline Data Collection: Enabled.
  23. Self-test execution status: ( 0) The previous self-test routine completed
  24. without error or no self-test has ever
  25. been run.
  26. Total time to complete Offline
  27. data collection: (3000) seconds.
  28. Offline data collection
  29. capabilities: (0x7b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. Conveyance Self-test supported.
  36. Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 2) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 39) minutes.
  46. Conveyance self-test routine
  47. recommended polling time: ( 5) minutes.
  48. SCT capabilities: (0x303f) SCT Status supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3
  56. 3 Spin_Up_Time 0x0027 201 200 021 Pre-fail Always - 950
  57. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 33
  58. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  60. 9 Power_On_Hours 0x0032 049 049 000 Old_age Always - 37715
  61. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  62. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31
  64. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 24
  65. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 33
  66. 194 Temperature_Celsius 0x0022 120 097 000 Old_age Always - 23
  67. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  68. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  69. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  70. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  71. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  72.  
  73. SMART Error Log Version: 1
  74. Warning: ATA error count 5 inconsistent with error log pointer 1
  75.  
  76. ATA Error Count: 5
  77. CR = Command Register [HEX]
  78. FR = Features Register [HEX]
  79. SC = Sector Count Register [HEX]
  80. SN = Sector Number Register [HEX]
  81. CL = Cylinder Low Register [HEX]
  82. CH = Cylinder High Register [HEX]
  83. DH = Device/Head Register [HEX]
  84. DC = Device Command Register [HEX]
  85. ER = Error register [HEX]
  86. ST = Status register [HEX]
  87. Powered_Up_Time is measured from power on, and printed as
  88. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  89. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  90.  
  91. Error 5 occurred at disk power-on lifetime: 15308 hours (637 days + 20 hours)
  92. When the command that caused the error occurred, the device was active or idle.
  93.  
  94. After command completion occurred, registers were:
  95. ER ST SC SN CL CH DH
  96. -- -- -- -- -- -- --
  97. 40 51 10 4d 76 35 e0 Error: UNC 16 sectors at LBA = 0x0035764d = 3503693
  98.  
  99. Commands leading to the command that caused the error were:
  100. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  101. -- -- -- -- -- -- -- -- ---------------- --------------------
  102. c8 00 10 4d 76 35 00 08 38d+14:02:02.302 READ DMA
  103. ec 00 00 00 00 00 00 08 38d+14:02:02.276 IDENTIFY DEVICE
  104. ef 03 46 00 00 00 00 08 38d+14:02:02.272 SET FEATURES [Set transfer mode]
  105.  
  106. Error 4 occurred at disk power-on lifetime: 15308 hours (637 days + 20 hours)
  107. When the command that caused the error occurred, the device was active or idle.
  108.  
  109. After command completion occurred, registers were:
  110. ER ST SC SN CL CH DH
  111. -- -- -- -- -- -- --
  112. 04 41 00 4d 76 35 e0 Error: ABRT at LBA = 0x0035764d = 3503693
  113.  
  114. Commands leading to the command that caused the error were:
  115. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  116. -- -- -- -- -- -- -- -- ---------------- --------------------
  117. c8 00 10 4d 76 35 00 08 38d+14:01:57.302 READ DMA
  118. c8 00 08 95 31 2c 00 08 38d+14:01:57.295 READ DMA
  119. c8 00 08 65 0b 2e 00 08 38d+14:01:57.280 READ DMA
  120. c8 00 08 5d 27 0f 00 08 38d+14:01:57.271 READ DMA
  121. c8 00 08 85 be 09 00 08 38d+14:01:57.265 READ DMA
  122.  
  123. Error 3 occurred at disk power-on lifetime: 6928 hours (288 days + 16 hours)
  124. When the command that caused the error occurred, the device was active or idle.
  125.  
  126. After command completion occurred, registers were:
  127. ER ST SC SN CL CH DH
  128. -- -- -- -- -- -- --
  129. 40 51 08 65 98 b1 ee Error: UNC 8 sectors at LBA = 0x0eb19865 = 246519909
  130.  
  131. Commands leading to the command that caused the error were:
  132. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  133. -- -- -- -- -- -- -- -- ---------------- --------------------
  134. c8 00 08 65 98 b1 0e 08 49d+00:48:30.802 READ DMA
  135. ca 00 08 9d 47 cb 0c 08 49d+00:48:30.802 WRITE DMA
  136. ca 00 08 05 48 c7 0c 08 49d+00:48:30.797 WRITE DMA
  137. ca 00 08 a5 59 bf 0c 08 49d+00:48:30.793 WRITE DMA
  138. ca 00 18 5d 59 bf 0c 08 49d+00:48:28.549 WRITE DMA
  139.  
  140. Error 2 occurred at disk power-on lifetime: 6925 hours (288 days + 13 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 40 51 08 ed c8 ab e0 Error: UNC 8 sectors at LBA = 0x00abc8ed = 11258093
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. c8 00 08 ed c8 ab 00 08 48d+22:06:30.596 READ DMA
  152. ec 00 00 00 00 00 00 08 48d+22:06:30.569 IDENTIFY DEVICE
  153. ef 03 46 00 00 00 00 08 48d+22:06:30.567 SET FEATURES [Set transfer mode]
  154.  
  155. Error 1 occurred at disk power-on lifetime: 6925 hours (288 days + 13 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 04 41 00 ed c8 ab e0 Error: ABRT at LBA = 0x00abc8ed = 11258093
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 08 ed c8 ab 00 08 48d+22:06:25.603 READ DMA
  167. c8 00 10 95 cc a2 00 08 48d+22:06:25.603 READ DMA
  168. c8 00 08 4d cc a2 00 08 48d+22:06:25.576 READ DMA
  169. ca 00 08 ad 69 65 00 08 48d+22:06:25.557 WRITE DMA
  170.  
  171. SMART Self-test log structure revision number 1
  172. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  173. # 1 Extended offline Completed without error 00% 24 -
  174. # 2 Short offline Completed without error 00% 24 -
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!