API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 28th, 2018
78
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.53 KB | None | 0 0
raw download clone embed print report
  1. dmesg
  2. [ 0.000000] Linux version 2.6.26 (dy.jin@swfarm-l12) (gcc version 4.3.2 (crosstool-NG-1.4.0) ) #195 PREEMPT Wed May 25 08:16:20 KST 2011
  3. [ 0.000000] LINUX started...
  4. [ 0.000000] DDR Size is 256MB
  5. [ 0.000000] console [early0] enabled
  6. [ 0.000000] CPU revision is: 00019554 (MIPS 34K)
  7. [ 0.000000] Begin Titania3_setup
  8. [ 0.000000] Set the MIU size in the 256MB DDR
  9. [ 0.000000] Determined physical RAM map:
  10. [ 0.000000] memory: 009dd000 @ 00000000 <7>(reserved)
  11. [ 0.000000] memory: 001e3000 @ 009dd000 <7>(usable)
  12. [ 0.000000] memory: 01673000 @ 0578d000 <7>(usable)
  13. [ 0.000000] memory: 03330000 @ 44cd0000 <7>(usable)
  14. [ 0.000000] Malformed early option 'lcdmodels'
  15. [ 0.000000] Wasting 80800 bytes for tracking 2525 unused pages
  16. [ 0.000000] Entering add_active_range(0, 0, 2525) 0 entries of 256 used
  17. [ 0.000000] Entering add_active_range(0, 2525, 3008) 1 entries of 256 used
  18. [ 0.000000] Entering add_active_range(0, 22413, 28160) 1 entries of 256 used
  19. [ 0.000000] Entering add_active_range(0, 281808, 294912) 2 entries of 256 used
  20. [ 0.000000] Zone PFN ranges:
  21. [ 0.000000] DMA 0 -> 131072
  22. [ 0.000000] Normal 131072 -> 131072
  23. [ 0.000000] HighMem 131072 -> 294912
  24. [ 0.000000] Movable zone start PFN for each node
  25. [ 0.000000] early_node_map[3] active PFN ranges
  26. [ 0.000000] 0 0 -> 3008
  27. [ 0.000000] 0 22413 -> 28160
  28. [ 0.000000] 0 281808 -> 294912
  29. [ 0.000000] On node 0 totalpages: 21859
  30. [ 0.000000] DMA zone: 1024 pages used for memmap
  31. [ 0.000000] DMA zone: 0 pages reserved
  32. [ 0.000000] DMA zone: 7731 pages, LIFO batch:0
  33. [ 0.000000] Normal zone: 0 pages used for memmap
  34. [ 0.000000] HighMem zone: 1280 pages used for memmap
  35. [ 0.000000] HighMem zone: 11824 pages, LIFO batch:1
  36. [ 0.000000] Movable zone: 0 pages used for memmap
  37. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 19555
  38. [ 0.000000] Kernel command line: root=/dev/mtdblock3 lginit=/dev/mtdblock4 rootfstype=squashfs host=saturn7 noinitrd ramdisk=0 console=ttyS0,115200n8r ip=165.186.175.92:192.168.0.1:192.168.0.10:192.168.0.1:255.255.255.0 appxip_addr=0x6e00000 fontxip_addr=0x0 xipfs=18 quiet_app loglevel=0 lcdmodels memsize=128 boot1stver=3.01.01 boot2ndver=0.01.17 bt=0 dvr=0 lpj=167424 start_kernel=1659
  39. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  40. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  41. [ 0.000000] Writing ErrCtl register=00000004
  42. [ 0.000000] Readback ErrCtl register=00000004
  43. [ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
  44. [ 0.000000] CPU freq count = 252000000
  45. [ 0.000000] CPU frequency 504.00 MHz
  46. [ 0.000000] console handover: boot [early0] -> real [ttyS0]
  47. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [ 0.106000] Memory: 68048k/77336k available (2792k kernel code, 9268k reserved, 2338k data, 116k init, 52416k highmem)
  50. [ 0.106000] totalram_pages : 17017, num_physpages : 19334
  51. [ 0.106000] SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  52. [ 0.106000] Calibrating delay loop (skipped)... 334.84 BogoMIPS preset
  53. [ 0.106000] Mount-cache hash table entries: 512
  54. [ 0.110000] net_namespace: 192 bytes
  55. [ 0.111000] NET: Registered protocol family 16
  56. [ 0.132000] SCSI subsystem initialized
  57. [ 0.133000] usbcore: registered new interface driver usbfs
  58. [ 0.134000] usbcore: registered new interface driver hub
  59. [ 0.135000] usbcore: registered new device driver usb
  60. [ 0.146000] NET: Registered protocol family 2
  61. [ 0.155000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.156000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  63. [ 0.156000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.156000] TCP: Hash tables configured (established 1024 bind 1024)
  65. [ 0.156000] TCP reno registered
  66. [ 0.159000] NET: Registered protocol family 1
  67. [ 0.162000] highmem bounce pool size: 64 pages
  68. [ 0.162000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
  69. [ 0.162000] NTFS driver 2.1.29 [Flags: R/O].
  70. [ 0.162000] JFFS2 version 2.2. (NAND) ?© 2001-2006 Red Hat, Inc.
  71. [ 0.163000] msgmni has been set to 30
  72. [ 0.163000] io scheduler noop registered (default)
  73. [ 0.165000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  74. [ 0.169000] serial8250: ttyS0 at I/O 0xbf201300 (irq = 8) is a 16550
  75. [ 0.180000] loop: module loaded
  76. [ 0.180000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  77. [ 0.181000] usbcore: registered new interface driver pegasus
  78. [ 0.181000] rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
  79. [ 0.181000] usbcore: registered new interface driver rtl8150
  80. [ 0.182000] usbcore: registered new interface driver asix
  81. [ 0.183000] Driver 'sd' needs updating - please use bus_type methods
  82. [ 0.184000] Disable power down for H.264 firmware
  83. [ 0.185000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
  84. [ 0.185000] redirect_size = 400000, redirect_start = 7c00000
  85. [ 0.186000] Loading nand bad block info(00000000+00020000)...
  86. [ 0.194000] Mstar nand-flash partition definition
  87. [ 0.194000] mtd info : # of partition = 25
  88. [ 0.194000] Creating 25 MTD partitions on "NAND 128MiB 3,3V 8-bit":
  89. [ 0.194000] 0x00000000-0x00020000 : "bbminfo"
  90. [ 0.197000] 0x00840000-0x008c0000 : "boot"
  91. [ 0.199000] 0x000c0000-0x000e0000 : "mtdinfo"
  92. [ 0.201000] 0x000e0000-0x007e0000 : "rootfs"
  93. [ 0.203000] 0x007e0000-0x00840000 : "lginit"
  94. [ 0.205000] 0x00020000-0x000a0000 : "boot"
  95. [ 0.207000] 0x008c0000-0x008e0000 : "crc32info"
  96. [ 0.210000] 0x00900000-0x00920000 : "model"
  97. [ 0.212000] 0x00920000-0x009a0000 : "logo"
  98. [ 0.214000] 0x07860000-0x07900000 : "cmndata"
  99. [ 0.216000] 0x07900000-0x07980000 : "nvram"
  100. [ 0.219000] 0x07980000-0x07a80000 : "user"
  101. [ 0.221000] 0x009a0000-0x00da0000 : "ezcal"
  102. [ 0.223000] 0x00da0000-0x016a0000 : "estream"
  103. [ 0.225000] 0x016a0000-0x01920000 : "opsrclib"
  104. [ 0.228000] 0x05940000-0x05c60000 : "kernel"
  105. [ 0.230000] 0x05c60000-0x06660000 : "lgapp"
  106. [ 0.232000] 0x06660000-0x07860000 : "lgres"
  107. [ 0.234000] 0x03840000-0x04240000 : "lgfont"
  108. [ 0.237000] 0x04240000-0x05940000 : "addon"
  109. [ 0.239000] 0x01920000-0x01c40000 : "kernel"
  110. [ 0.241000] 0x01c40000-0x02640000 : "lgapp"
  111. [ 0.244000] 0x02640000-0x03840000 : "lgres"
  112. [ 0.246000] 0x008e0000-0x00900000 : "cert"
  113. [ 0.249000] 0x07a80000-0x07b20000 : "authcxt"
  114. [ 0.251000] mod_nand_init is invoked
  115. [ 0.251000] GE driver inits
  116. [ 0.251000] GOP driver inits
  117. [ 0.251000] REG_MIPS_BASE 0xBF200000
  118. [ 0.251000] mod_iic_init is invoked
  119. [ 0.252000]
  120. [ 0.252000] Check model option
  121. [ 0.252000] BOOTSTRAP 2d(4)
  122. [ 0.252000] Display Type : LCD
  123. [ 0.252000] NO FRC
  124. [ 0.252000] Mini LVDS
  125. [ 0.252000] DDR 256
  126. [ 0.252000] FHD Panel
  127. [ 0.252000] GIP Panel
  128. [ 0.252000] LCD Panel
  129. [ 0.256000] [SCALER][000157] _mod_scaler_init
  130. [ 0.256000] [MADMOD][003318] _mod_mad_init is invoked
  131. [ 0.256000] init 160
  132. [ 0.256000] [HVDMOD][000871] H264 bit-stream buffer addr 0xc1b00000; size 4194304
  133. [ 0.256000] CI driver inits
  134. [ 0.256000] [TTX_DRV][00503]init 170
  135. [ 0.256000] [VE_DRV][00488]MDrv_VE_Module_Init is invoked
  136. [ 0.256000] [VE_DRV][00492]call register_chrdev_region
  137. [ 0.256000] [VE_DRV][00518]Init VE successfully
  138. [ 0.256000] MDrv_CC_Init
  139. [ 0.256000] init 172
  140. [ 0.256000]
  141. [ 0.256000] [DEMOD_DRV][00321]init 245
  142. [ 0.256000] [MPIF][000126] MDrv_MPIF_ModuleInit
  143. [ 0.256000] [BDMA_DRV][00959]init 248
  144. [ 0.256000] Get the MIU1 Base Addr from 256M DDR
  145. [ 0.258000] TCP cubic registered
  146. [ 0.258000] NET: Registered protocol family 17
  147. [ 0.258000] ieee80211: 802.11 data/management/control stack, git-1.1.13
  148. [ 0.258000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
  149. [ 0.258000] ieee80211_crypt: registered algorithm 'NULL'
  150. [ 0.258000] ieee80211_crypt: registered algorithm 'WEP'
  151. [ 0.258000] ieee80211_crypt: registered algorithm 'CCMP'
  152. [ 0.258000] ieee80211_crypt: registered algorithm 'TKIP'
  153. [ 0.260000] Adding user_initcall[0] = 0x8057bd98
  154. [ 0.260000] Adding user_initcall[1] = 0x8057bda4
  155. [ 0.260000] Adding user_initcall[2] = 0x8057ecc0
  156. [ 0.260000] Adding user_initcall[3] = 0x805ae4cc
  157. [ 0.265000] VFS: Mounted root (squashfs filesystem) readonly.
  158. [ 0.276000] VFS: Mounted lginit (squashfs filesystem) readonly.
  159. [ 0.277000] Freeing unused kernel memory: 116k freed
  160. [ 0.415000] Algorithmics/MIPS FPU Emulator v1.5
  161. [ 0.734000] release: Found /mnt/lg/user/lgmod/release
  162. [ 0.950000] Loading pty module ..
  163. [ 1.079000] Loading pty module .. done.
  164. [ 1.174000] Registering mini_fo version $Id$
  165. [ 1.178000] mini_fo: using base directory: /dev
  166. [ 1.178000] mini_fo: using storage directory: /tmp/lgmod/tmpfs/dev
  167. [ 1.486000] cramfs: checking physical address 0x6e00000 for linear cramfs image
  168. [ 1.486000] cramfs: linear cramfs image appears to be 18240 KB in size
  169. [ 1.549000] release-patch: boot patch.sh ... (patchwork time)
  170. [ 1.569000] rcS-release: help: $ call debug_os_shell+0xb0
  171. [ 1.570000] rcS-release: Starting RELEASE TMUX-PIPE (/mnt/lg/lgapp/RELEASE 0) ...
  172. [ 2.537000] [detached]
  173. [ 3.210000] @@@@@@ u32CpuSpeedMHz= 504 MHz
  174. [ 3.210000] @@@@@@ u32AdjParam= 21 MHz
  175. [ 3.295000] [MADMOD][002567] _mod_mad_open is invoked
  176. [ 3.296000] [MADMOD][002672] ioctl: receive MDrv_MAD_INITIALIZE_MODULE ....
  177. [ 3.308000] TSP Init : TSP Sw Reset
  178. [ 3.309000] TSP FW Addr=0xbc0000
  179. [ 3.309000] TSP FW DMA enable=1
  180. [ 3.309000] WB status : WB Reset = 0, 0, New WARB = 0, ECO = 8192
  181. [ 3.319000] [SCALER][000205] _mod_scaler_open
  182. [ 3.320000] Get the MIU1 Base Addr from 256M DDR
  183. [ 3.323000] ====== MDrv_MAD_DspLoadCode: 0x30 ======
  184. [ 3.323000] PM addr: 0x161F
  185. [ 3.323000] PM buf addr: 0x80853bde
  186. [ 3.323000] PM size: 0x21
  187. [ 3.323000] Dsp code verify ok!!
  188. [ 3.323000] CM addr: 0x780
  189. [ 3.323000] CM buf addr: 0x80853bba
  190. [ 3.323000] CM size: 0x1B
  191. [ 3.323000] Dsp code verify ok!!
  192. [ 3.323000] PreFetch PM addr: 0x11000
  193. [ 3.323000] PreFetch PM buf addr: 0x80853c12
  194. [ 3.323000] PreFetch PM size: 0x12
  195. [ 3.323000] MIU of PreFetch: 0xA0C33000
  196. [ 3.323000] Cache PM addr: 0xA000
  197. [ 3.323000] Cache PM buf addr: 0x80853c06
  198. [ 3.323000] Cache PM size: 0x3
  199. [ 3.323000] MIU of Cache: 0xA0C1E000
  200. [ 3.323000] MDrv_AUDSP_DspLoadCode finished(type=SE dec_none(0x30))
  201. [ 3.323000] ====== MDrv_MAD_DspLoadCode: 0xa0 ======
  202. [ 3.323000] PM addr: 0x3CAD
  203. [ 3.323000] PM buf addr: 0x80853b8a
  204. [ 3.323000] PM size: 0x1E
  205. [ 3.323000] Dsp code verify ok!!
  206. [ 3.323000] CM addr: 0xC00
  207. [ 3.323000] CM buf addr: 0x80853b5a
  208. [ 3.323000] CM size: 0x2A
  209. [ 3.323000] Dsp code verify ok!!
  210. [ 3.323000] Cache PM addr: 0xE000
  211. [ 3.323000] Cache PM buf addr: 0x80853bae
  212. [ 3.323000] Cache PM size: 0x3
  213. [ 3.323000] MIU of Cache: 0xA0C2A000
  214. [ 3.323000] MDrv_AUDSP_DspLoadCode finished(type=SE adv_none(0xa0))
  215. [ 3.323000] ====== MDrv_MAD_DspLoadCode: 0x60 ======
  216. [ 3.323000] PM addr: 0xFFF
  217. [ 3.323000] PM buf addr: 0x808511f2
  218. [ 3.323000] PM size: 0xCBA
  219. [ 3.326000] Dsp code verify ok!!
  220. [ 3.326000] CM addr: 0x8
  221. [ 3.326000] CM buf addr: 0x8084fbea
  222. [ 3.326000] CM size: 0x1602
  223. [ 3.330000] Dsp code verify ok!!
  224. [ 3.330000] PreFetch PM addr: 0x10000
  225. [ 3.330000] PreFetch PM buf addr: 0x80853852
  226. [ 3.330000] PreFetch PM size: 0x300
  227. [ 3.330000] MIU of PreFetch: 0xA0C30000
  228. [ 3.330000] Cache PM addr: 0x8000
  229. [ 3.330000] Cache PM buf addr: 0x80851eb2
  230. [ 3.330000] Cache PM size: 0x1998
  231. [ 3.330000] MIU of Cache: 0xA0C18000
  232. [ 3.330000] Dsp code verify ok!!
  233. [ 3.330000] Dsp code verify ok!!
  234. [ 3.330000] MDrv_AUDSP_DspLoadCode finished(type=T3 SE system(0x60))
  235. [ 3.330000] audio DSP_SE LoadCode success..
  236. [ 3.330000] ====== MDrv_MAD_DspLoadCode: 0x4b ======
  237. [ 3.330000] PM addr: 0x3CAD
  238. [ 3.330000] PM buf addr: 0x808a52fa
  239. [ 3.330000] PM size: 0x618
  240. [ 3.330000] Dsp code verify ok!!
  241. [ 3.330000] CM addr: 0xC00
  242. [ 3.330000] CM buf addr: 0x808a47a2
  243. [ 3.330000] CM size: 0xB4F
  244. [ 3.330000] Dsp code verify ok!!
  245. [ 3.330000] PreFetch PM addr: 0x15800
  246. [ 3.330000] PreFetch PM buf addr: 0x808ab242
  247. [ 3.330000] PreFetch PM size: 0x3ddd
  248. [ 3.330000] MIU of PreFetch: 0xA0C40800
  249. [ 3.330000] Cache PM addr: 0xE000
  250. [ 3.330000] Cache PM buf addr: 0x808a591a
  251. [ 3.330000] Cache PM size: 0x5922
  252. [ 3.330000] MIU of Cache: 0xA0C2A000
  253. [ 3.330000] MDrv_AUDSP_DspLoadCode finished(type=cv3(0x4b))
  254. [ 3.335000] ##########MDrv_SC_SetPanelTiming( 2 )
  255. [ 3.335000]  ====== MDrv_MAD_DspLoadCode: 0x3 ======
  256. [ 3.338000] PM addr: 0xFFF
  257. [ 3.338000] PM buf addr: 0x80794d9a
  258. [ 3.338000] PM size: 0x1FE3
  259. [ 3.344000] Dsp code verify ok!!
  260. [ 3.344000] CM addr: 0x200
  261. [ 3.344000] CM buf addr: 0x80793372
  262. [ 3.344000] CM size: 0x1A1F
  263. [ 3.349000] Dsp code verify ok!!
  264. [ 3.349000] PreFetch PM addr: 0x12600
  265. [ 3.349000] PreFetch PM buf addr: 0x80798826
  266. [ 3.349000] PreFetch PM size: 0x1710
  267. [ 3.349000] MIU of PreFetch: 0xA0D37200
  268. [ 3.349000] Cache PM addr: 0x8600
  269. [ 3.349000] Cache PM buf addr: 0x80796d86
  270. [ 3.349000] Cache PM size: 0x1A9A
  271. [ 3.349000] MIU of Cache: 0xA0D19200
  272. [ 3.349000] MDrv_AUDSP_DspLoadCode finished(type=mpeg(0x3))
  273. [ 3.349000] ====== MDrv_MAD_DspLoadCode: 0x20 ======
  274. [ 3.349000] PM addr: 0x37FF
  275. [ 3.349000] PM buf addr: 0x807d7ade
  276. [ 3.349000] PM size: 0xE3D
  277. [ 3.352000] Dsp code verify ok!!
  278. [ 3.352000] CM addr: 0xE00
  279. [ 3.352000] CM buf addr: 0x807d771e
  280. [ 3.352000] CM size: 0x3B7
  281. [ 3.353000] Dsp code verify ok!!
  282. [ 3.353000] Cache PM addr: 0x11600
  283. [ 3.353000] Cache PM buf addr: 0x807d8922
  284. [ 3.353000] Cache PM size: 0x1023
  285. [ 3.353000] MIU of Cache: 0xA0D34200
  286. [ 3.353000] MDrv_AUDSP_DspLoadCode finished(type=MPEG encoder(0x20))
  287. [ 3.353000] ====== MDrv_MAD_DspLoadCode: 0x50 ======
  288. [ 3.353000] PM addr: 0xFF0
  289. [ 3.353000] PM buf addr: 0x80792eb2
  290. [ 3.353000] PM size: 0x18
  291. [ 3.353000] Dsp code verify ok!!
  292. [ 3.353000] CM addr: 0x8
  293. [ 3.353000] CM buf addr: 0x80792b8e
  294. [ 3.353000] CM size: 0x31B
  295. [ 3.354000] Dsp code verify ok!!
  296. [ 3.354000] Cache PM addr: 0x8000
  297. [ 3.354000] Cache PM buf addr: 0x80792ed2
  298. [ 3.354000] Cache PM size: 0x450
  299. [ 3.354000] MIU of Cache: 0xA0D18000
  300. [ 3.354000] Dsp code verify ok!!
  301. [ 3.354000] Dsp code verify ok!!
  302. [ 3.354000] MDrv_AUDSP_DspLoadCode finished(type=T3 DEC system(0x50))
  303. [ 3.371000] [VE_DRV][00327]MDrv_VE_Open is invoked
  304. [ 3.372000] [TTX_DRV][00164]
  305. [ 3.372000] [TTX_DRV][00165]open 170
  306. [ 3.372000] [TTX_DRV][00299]VBI buffer addr 0x82bbf000
  307. [ 3.372000] [TTX_DRV][00300]VBI buffer parameters addr 0xa2bfef30
  308. [ 3.372000] [TTX_HAL][00184]Slicer buf addr:0x577e00
  309. [ 3.372000] [TTX_HAL][00185]Slicer buf size: 0x3ff00
  310. [ 3.372000] [TTX_HAL][00191]Slicer entry: 0x1550
  311. [ 3.372000] [TTX_HAL][00194]Slicer buf addr: 0x82bbf000
  312. [ 3.372000] [TTX_HAL][00195]Slicer buf size: 0x3ff00
  313. [ 3.372000] [TTX_HAL][00196]Slicer entry: 0x1550
  314. [ 3.380000] [SYS][000149] MDrv_SYS_SetPanelInfo
  315. [ 3.381000] ##########MDrv_SC_SetPanelTiming( 1 )
  316. [ 3.381000] ####### inputsrc en=1, in vfreq=0, out vfreq=600
  317. [ 3.381000] ####### u16HTotal =2199, u16VTotal=1134
  318. [ 3.381000] <2>BUG at /home/work/dy.jin/gp2/tags/v3.03.00_r42955_ziggo/os/saturn7_linux/kernel/linux-2.6.26-saturn7/drivers/mstar/scaler/mdrv_scaler.c:5992 assert(0)
  319. [ 3.416000] GE opens successfully
  320. [ 3.416000] GOP opens successfully
  321. [ 3.427000]
  322. [ 3.427000] [CLK_Enable]: GOP1G: 0x100
  323. [ 3.472000]
  324. [ 3.472000] [CLK_Enable]: GOP4G: 0x0
  325. [ 3.484000]
  326. [ 3.484000] [CLK_Enable]: GOP2G: 0x0
  327. [ 3.484000]
  328. [ 3.484000] Set GOP 2G to SC.
  329. [ 3.885000] [DEMOD_HAL][00383]DSP type = 1, code size = 23426
  330. [ 3.894000] [DEMOD_HAL][00477]DSP code loaded successfully
  331. [ 3.928000] Return for MDrv_MAD_ReLoadCode, it is the same decoder type.
  332. [ 3.928000] 
  333. [ 4.198000] +++++++++++++MDrv_SC_SetFreerun Enabled+++++++++++++
  334. [ 4.198000] ####### inputsrc en=0, in vfreq=0, out vfreq=600
  335. [ 4.198000] ####### u16HTotal =2199, u16VTotal=1134
  336. [ 4.198000] ======mhal mvop==> ptiming->u16Num = 0x2714, ptiming->u16Den = 0xa8c0
  337. [ 4.394000] Return for MDrv_MAD_ReLoadCode, it is the same decoder type.
  338. [ 4.394000] ======mhal mvop==> ptiming->u16Num = 0x1f4a, ptiming->u16Den = 0xa8c0
  339. [ 7.097000] calling user_initcall 0x8057bd98
  340. [ 7.097000] Second-Mstar-soc-ehci H.W init
  341. [ 7.097000] uranus_start_ehc2 start
  342. [ 7.109000] Second-Mstar-soc-ehci Second-Mstar-soc-eh: Mstar EHCI
  343. [ 7.111000] 
  344. [ 7.111000] isr_inputCnt reset for SC_ACTIVE_FLG_FMT_CHG
  345. [ 7.111000] ####### inputsrc en=1, in vfreq=500, out vfreq=500
  346. [ 7.111000] ####### u16HTotal =2199, u16VTotal=1361
  347. [ 7.111000] 
  348. [ 7.126000] +++++++++++++MDrv_SC_SetFreerun Disabled+++++++++++++
  349. [ 7.126000] <6>Second-Mstar-soc-ehci Second-Mstar-soc-eh: new USB bus registered, assigned bus number 1
  350. [ 7.149000] Second-Mstar-soc-ehci Second-Mstar-soc-eh: irq 42, io mem 0xbf201a00
  351. [ 7.167000] usb usb1: configuration #1 chosen from 1 choice
  352. [ 7.174000] hub 1-0:1.0: USB hub found
  353. [ 7.174000] hub 1-0:1.0: 1 port detected
  354. [ 7.461000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  355. [ 7.461000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  356. [ 7.461000] usb usb1: Product: Mstar EHCI
  357. [ 7.461000] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd
  358. [ 7.461000] usb usb1: SerialNumber: mstar
  359. [ 7.470000] calling user_initcall 0x8057bda4
  360. [ 7.470000] Mstar-soc-ehci H.W init
  361. [ 7.470000] uranus_start_ehc1 start
  362. [ 7.482000] Mstar-soc-ehci Mstar-soc-ehci.0: Mstar EHCI
  363. [ 7.496000] Mstar-soc-ehci Mstar-soc-ehci.0: new USB bus registered, assigned bus number 2
  364. [ 7.496000] Mstar-soc-ehci Mstar-soc-ehci.0: irq 15, io mem 0xbf204800
  365. [ 7.519000] usb usb2: configuration #1 chosen from 1 choice
  366. [ 7.649000] [VE_DRV][00114]_MDrv_VE_SwitchInputSrc 0
  367. [ 7.661000] hub 2-0:1.0: USB hub found
  368. [ 7.661000] hub 2-0:1.0: 1 port detected
  369. [ 7.830000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  370. [ 7.830000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  371. [ 7.830000] usb usb2: Product: Mstar EHCI
  372. [ 7.830000] usb usb2: Manufacturer: Linux 2.6.26 ehci_hcd
  373. [ 7.830000] usb usb2: SerialNumber: mstar
  374. [ 7.835000] Plug in USB Port2:20
  375. [ 7.852000] calling user_initcall 0x8057ecc0
  376. [ 7.852000] Initializing USB Mass Storage driver...
  377. [ 8.093000] USB reset port 1
  378. [ 8.452000] usb 1-1: configuration #1 chosen from 1 choice
  379. [ 8.466000] hub 1-1:1.0: USB hub found
  380. [ 8.466000] hub 1-1:1.0: 4 ports detected
  381. [ 8.592000] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  382. [ 8.592000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  383. [ 8.592000] usb 1-1: Product: USB 2.0 Hub
  384. [ 8.602000] usbcore: registered new interface driver usb-storage
  385. [ 8.602000] USB Mass Storage support registered.
  386. [ 8.602000] calling user_initcall 0x805ae4cc
  387. [ 9.281000] usb 1-1.2: configuration #1 chosen from 1 choice
  388. [ 11.309000] eth0: register 'asix' at usb-mstar-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:50:53:0c
  389. [ 11.365000] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=7720
  390. [ 11.365000] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  391. [ 11.365000] usb 1-1.2: Product: AX88772
  392. [ 11.365000] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
  393. [ 11.365000] usb 1-1.2: SerialNumber: 000001
  394. [ 11.583000] usb 1-1.3: configuration #1 chosen from 1 choice
  395. [ 11.594000] usb-storage: This device (058f,6387,0102 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 2.6.26)
  396. [ 11.594000] Please send a copy of this message to and
  397. [ 11.597000] scsi0 : SCSI emulation for USB Mass Storage devices
  398. [ 11.609000] usb-storage: device found at 4
  399. [ 11.609000] usb-storage: waiting for device to settle before scanning
  400. [ 11.612000] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
  401. [ 11.672000] sd 0:0:0:0: [sda] 16470016 512-byte hardware sectors (8433 MB)
  402. [ 11.672000] sd 0:0:0:0: [sda] Write Protect is off
  403. [ 11.672000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  404. [ 11.675000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  405. [ 11.684000] sd 0:0:0:0: [sda] 16470016 512-byte hardware sectors (8433 MB)
  406. [ 11.685000] sd 0:0:0:0: [sda] Write Protect is off
  407. [ 11.685000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  408. [ 11.685000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  409. [ 11.685000] sda:<6>usb 1-1.3: New USB device found, idVendor=058f, idProduct=6387
  410. [ 11.698000] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  411. [ 11.698000] usb 1-1.3: Product: Mass Storage
  412. [ 11.698000] usb 1-1.3: Manufacturer: Generic
  413. [ 11.698000] usb 1-1.3: SerialNumber: 12345678
  414. [ 12.034000] sda1
  415. [ 12.068000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  416. [ 12.093000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  417. [ 12.097000] usb-storage: device scan complete
  418. [ 12.876000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  419. [ 15.777000] module: boot module.sh ...
  420. [ 15.900000] usbnet: module is already loaded
  421. [ 15.901000] modprobe: can't load module usbnet.ko (usbnet.ko): Invalid argument
  422. [ 15.948000] pegasus: module is already loaded
  423. [ 15.948000] modprobe: can't load module pegasus.ko (pegasus.ko): Invalid argument
  424. [ 16.090000] Error: Driver 'asix' is already registered, aborting...
  425. [ 16.090000] usbcore: error -17 registering interface driver asix
  426. [ 16.108000] usbnet: module is already loaded
  427. [ 16.108000] modprobe: can't load module usbnet (usbnet.ko): Invalid argument
  428. [ 16.135000] usbnet: module is already loaded
  429. [ 16.135000] modprobe: can't load module usbnet (usbnet.ko): Invalid argument
  430. [ 16.637000] rcS-usercall1: call_wait - Calling...
  431. [ 18.727000] rcS-usercall1: call_wait - Done(1 1 )
  432. [ 18.751000] network: Setting network loopback
  433. [ 18.757000] network: Configuring network via network config file...
  434. [ 18.764000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  435. [ 18.795000] telnetd: boot
  436. [ 18.831000] dropbear: boot
  437. [ 18.946000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  438. [ 18.959000] httpd: boot
  439. [ 18.991000] mount: wait
  440. [ 21.040000] mount: wait - done
  441. [ 21.063000] mount: boot noatime,user=6,pass=6,iocharset=utf8 //192.168.1.40/Media_hdd1 /mnt/usb1/Drive1/MEDIA ...
  442. [ 21.182000] lgmod: boot auto_start.sh ...
  443.  
  444. openrelease.log (require OPENRELEASE)
  445.  
  446. openrelease.out (require OPENRELEASE)
  447. RELEASE.out (require tmux-pipe)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!