Advertisement
Guest User

Untitled

a guest
May 2nd, 2018
181
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.52 KB | None | 0 0
  1. $ sudo smartctl -a /dev/sda
  2. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-40-generic] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: INTEL SSDSC2KW480H6
  7. Serial Number: [REDACTED]
  8. LU WWN Device Id: 5 5cd2e4 14d099c94
  9. Firmware Version: LSF042C
  10. User Capacity: 480.103.981.056 bytes [480 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: Solid State Device
  13. Form Factor: 2.5 inches
  14. Device is: Not in smartctl database [for details use: -P showall]
  15. ATA Version is: ACS-3 (minor revision not indicated)
  16. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: [REDACTED]
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: FAILED!
  23. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  24. See vendor-specific Attribute list for failed Attributes.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x02) Offline data collection activity
  28. was completed without error.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 0) seconds.
  35. Offline data collection
  36. capabilities: (0x53) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. No Offline surface scan supported.
  41. Self-test supported.
  42. No Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 30) minutes.
  53. SCT capabilities: (0x0039) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 1
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 65528
  62. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 635
  63. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 271
  64. 170 Unknown_Attribute 0x0033 009 009 010 Pre-fail Always FAILING_NOW 0
  65. 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
  66. 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
  67. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12
  68. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  69. 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
  70. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  71. 190 Airflow_Temperature_Cel 0x0032 049 063 000 Old_age Always - 49 (Min/Max 26/63)
  72. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
  73. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  74. 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 5487
  75. 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
  76. 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
  77. 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 0
  78. 232 Available_Reservd_Space 0x0033 009 009 010 Pre-fail Always FAILING_NOW 0
  79. 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
  80. 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 5487
  81. 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 8269
  82. 249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 710
  83. 252 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
  84.  
  85. SMART Error Log Version: 1
  86. No Errors Logged
  87.  
  88. SMART Self-test log structure revision number 1
  89. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  90. # 1 Extended offline Completed without error 00% 635 -
  91. # 2 Short offline Completed without error 00% 628 -
  92. # 3 Short offline Completed without error 00% 628 -
  93. # 4 Short offline Completed without error 00% 627 -
  94.  
  95. SMART Selective self-test log data structure revision number 1
  96. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  97. 1 0 0 Not_testing
  98. 2 0 0 Not_testing
  99. 3 0 0 Not_testing
  100. 4 0 0 Not_testing
  101. 5 0 0 Not_testing
  102. Selective self-test flags (0x0):
  103. After scanning selected spans, do NOT read-scan remainder of disk.
  104. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement