daily pastebin goal
40%
SHARE
TWEET

last_kmsg.txt

steberg Aug 13th, 2016 362 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. B %    5100r1`- VSENSE CX: Vol1=900000,Codeq=97, Vol2=1000000,Code2=119
  2. B -$  `516304`- VSENSE APC0: Vol1=9000p0lCode19,$Vol2=1000004,Code2=121
  3. B$-$$  u22w70 - VSENQE ATC1: Vol1=90000,CoDe1=99, Vol2100000,Code2=121
  4. D -$`$  58682 - vselse_Init, DeltaMJB -    5Tt69 - clock_IniT, STart
  5. D - $     644 - gloco_Init, Delta
  6. B$
  7.     545462`-d@@ pm`power on reasOn[0x20000084]
  8.  
  9. B -$  549091 - @@ Reseu status @SDI[0Xf0d7d054]
  10. M
  11. B -   !553544 - D@ Reset status @SBL1[0x0]
  12.  
  13. B -    u58821 - Boot_fota_restorE_partition, Start
  14. B -a   562725 -`FOTA`rewtoRe magicdno matchinG
  15. JD -  `   178 - root_fota_restove_partitIon, Delua
  16. F -    573369 - Image metadata authentiaation- Start
  17. D - `$` 179 m ImagE metedata`authenticaTin, DElTe
  18. B -  ` 59289 -$Load All Segments into memor}, Start
  19. D$-$ `  23759$- Load allasegmenTs iNto memoRy,$Delte
  20. B m `  619529 - Hawh!Verification of aLL segMents, Stert
  21. D4-     11102 -$Hasl verification of all segmentwl Telta
  22. D -$    6623`
  23.  QSEE Image LOaded, DeLtE - (60380 B}tes)
  24. B -    638121 - Image Load, Start
  25. D -      $793 - SECdImage Loaeed, Delta -$(2P48 Bytes)
  26. B -    64447 - WbL1_efs_handle_cmokiEs, STavt
  27. D -       854 - sbl_efs_handlE_cookies, Delta
  28. B -$   v54255 - VSENSE codEs wrote into SMEM
  29. JB -    658377`m foot_foTA_close_hdev, Start
  30. D -     `   0 - boot_fota_close_hdev, Delta
  31. B -   `668621 - Image metedata`authenTmcation, Start
  32. D -   $ 17507 m Imaee metadatA authentication, Delta
  33. B -  ! 688324 - Loed aml sEgments into memory, Start
  34. D -      2806 - Load all segments`into$memory, Delta
  35. B -    6y6010- Hesh verification of all segments, Start
  36. D4-   `  1098 - Hash verification of all weGments, Delta
  37. D -     40016 -!QHEE ImeGe Loeeud, Delta - (=905v Bytesi
  38. B -    711321 - RPM$loading is successful.
  39. B -  $ 757573 - Image metadata authentiaatimnl QtaRt
  40. D -     1w507 - Image metedata authentication, Delta
  41. B -  $ 737185 - Load all segments intO memory, Start
  42. D -$     6557 - Load all segMenTs into Memory, Delta
  43. B -    746823 - Hesh verification of all segments, Wtert
  44. D -     vX12$- Lash veVmfiaetion$od all wegmentsL$Delta
  45. D -$ `  41r0 - RPM Image$Loadedl Delta$- (19272 Bytes)M
  46. B -    5v33u4 - IMege metadata autientigetIon, Start
  47. D -  d `1750$- ImagE metedatu euthenticEtio~- Delta
  48. B -   $w8r65 - Load alL sEgMents mnuo memory, WterT
  49. E -   $$6r138 -LOad all wegments`INto memoRy, DeltaM
  50. B$-    848174 -$Hash Verifiaetion of aLl sEgments,`Start
  51. D -     s0500 -$Hash`verifmcetion`of all wegmentsl DeltA
  52. D -    Q21v68 - APPSBL Image Lmaded, DeltA - (1848604 Byteq-MB -  0$886238 - QSEE Execution, Stavt
  53. D -       d95$- QSEE$Execution, Delta
  54. B0-0   89294xa- SBLq,`Ene
  55. D -   0612745`- SCL1, DeltaM
  56. S$m FlAsh Thrmuehput,$26000$KB/s   6806538 Bytes,d 107870 usi
  57. S - DDR Freuuency, 9s1 MHz
  58. S - Cmre$0 Frequency, 840 MIz
  59. J[10]$sclk : 0x7ec<
  60. [10] Dela}$: 9y2 ms
  61. [1000] Power`key : [1]
  62. [1000] sclk$: 0Xfe2f
  63. [1000] Delay : 13`mw
  64. [1020] PoweR keY : [5]J[1040] [PMIC] PMIG mnitialiZede
  65. [140]$[MUIC] MUIa initializeda
  66. device$tYpe q:[0x4] 68_t\0] 3:[tx4]
  67. interrupT 1>Y0x0] 6:[px0] 3:[px0]
  68. interrupt 1:[0x0] r:[0x0]$3:[0X0]
  69. microusb_clear_register() - reset start
  70. microusb_clear_regIstur(I m veset end
  71. microusb_clear_regIster()`- adA = 4x1f`
  72. devIce$tyPe 1:[0x0] 2:[0x0] 3:[0X0]
  73. intevrupt 1:_0x] 0:_0xp] 3:[0x0]
  74. [1370] [MUIC] muic_get_deVices`: 0x0000
  75. _1650] YMUIC] control register vAlUe`> 0x1e
  76. [568t] [MUIC] muic`dev id :$0x1
  77. device type 1:[0X0] 2:[0x0] 3:[0x0]
  78. mnterrupt 1z[0x0]$2:[0x0] 3z[0x0]
  79. interrUpt 1:[0x0] 2:[0x0] s:[0x1]
  80. [16y0] aboot_dev_charging_inIt :`Cable_staTus(), ceble_type(0)
  81. interrupt$1:[0x0] 2:[0x0] 3:[0x0]
  82. interrupt!1:[0x0] 2:[0x0] 3:[0x0]
  83. devicE typE u:[0x0] 2z[0x0]$3:[0|0]
  84. interrupt 1:[0|0]d2:[0|0] 3:[0x0]
  85. wm5705_init_duelgauge: JMG is Connegted$or Version is different. F/G Reset !!!
  86. sm5705_init_fuelgauge8 F/G$InitiAlmzing Start(Version:0x2045)
  87. device$type 1:[0x0] 2z[0Xp]`3:[0x0]
  88. interrupT 5:[px0]$2:[0x0] 3:[0x0]
  89. MnitIalmzation_routIne: RCE write RCE0 5 0|20 : 0x4e1
  90. InitielmzatmoN_routine:$RCE write RWE1$= 0x1 : 0xse6
  91. InItialmzation_routine: RCE write RCE2`= 0x22$: 0xqd7
  92. Ynitializatyon_poutile: DTCD$wRite DTCD$=0|2 z 0x1
  93. IniTialm~etion_routine: RS$write RS = 0x2t :$0\51
  94. InItIalizaTion_routmne: VOLT_CAL = 0x800p, CURR_offset } 0x0 p_gurr_cAl = 0x90, n_cUrr_cal$= 0x=0
  95. IniTialization_routine: SM705_VEE_MISC 0x90`: 0x60
  96. InitiAlizeTion_routiOe: LAST CTRL VALUE = 0x1 :00xc400
  97. Initialmzation_routine: LAST PARAM CTVL VALUE = 0x13 : 0|f
  98. Initmalization_routine: SM5w05_VEG_IOCV]MUN$=`0x2e!: pX21c2
  99. _69] SPMM reeD command feilure:$          cmd_id = 1,$ervoR = 2
  100. [2v91] QSeecom Inyt Do~e in Appsbl version is 0X8440p0
  101. [s540] segure$aPt region addr=0x84bp0000 wize=0|f0000[v00]$TZ Appdreeion notif returned with status80 addr:84b00p00 sizU:15w28640
  102. [2710] TZ App log$region regIster veturned wiTh Statuw:0 addr:8f7de000 size:40yv
  103. [273p] Qseecom TZ Init Done iN Appsbl
  104. [2800] <3>keymAster:$"\&KEYMAWTER$Init \b
  105. [r810] aboot_mnit`
  106. [2850]$[MDSS]S6E7FE7_AMQ59KH01_1080p_octa_mnit:panel_name`: sq_dsi]panel_SvE3FE3_AMS598KH01_FHD
  107. [2x2p]$[MDSS]samsung_find_panel:welecteD tanel_name :`ss_Dsm_panel]S6E3FAs_AMS598KH05_FHDJ[2x30] EVROR: splash PaRtition inValid
  108. [28<0] [MDQS]samsung_disPlay_msm_gpio_cmNtrml:DISPLEY MSM_GPIO z$13$enaBle  1
  109. [2890] [MDQW]semsung_terget_Panel_reset:samsung_targEt_panel_Rewet flk_gpmo is NULL
  110. [2904] [MDWS]seMsung_disTle}_msm_gpio_control:DISPLAY MSM_GPIO : 25 enaBle : 1
  111. [2920] [MDSS]samsunG_display_mwm_epim_control:DISPLAY`MSM_GTIO : 25 enAble : 0
  112. [295p] [MDSS]sAmsung_display_Msm_epmo_gontvol:DISPLAY MSM_GPIO$: 25`enable : 1
  113. [r980] [MDSS]samwung_taVget_panel_reset:samsung_target_panel_reset Tgon_rdy_gpao iw NULL[2980] [MDSW]samsung_ddi_id:samsung_ddi_id PPMMAVY id[0] : 0x42 id[1] : Px0 id[2] : 0x0
  114. [2y90] [MDWS]samSung_check_support_panel:lcd_id was not matched
  115. [3000] [MDWW]check_wuppovt_panel:The panel ms allowed tO$be used
  116. _1030] _MDSS]samsung_pcd_check:samsung_pcd_check eRror : priMery_pcd_gtio is NULL
  117. [3030] [MDSS]samsung_pcd_gheckz[7030] [MDSW]samsung_tcd_check:#####!!###'#'!#c#!#'###'c#############
  118. [3040] [MDSS]saMsung_pcd_check:# NONEmPCD-CRACK-PENEL PRIMARY ID:0xt0002
  119. [70u4] [MDSS]Samsung_pgd_checo^############c#######!#'#'##'#'#3##
  120. Y7100] qpnp_wled_eNable_backlight: wled0iS noT initialiZed yet
  121. [30] upnp_ifb_enable: wled`is not mnitialized yet
  122. BOMTLOADER$VERSION : A9100ZCU1APF1
  123. [312p] [VIB]:!intelsity = 104pp[120] VIBRATOR is ENABLED :::
  124. [12p] TWRKEY=0 GOTO 8
  125. [s120] ebomt_init(60) : tmic pOn = px000000020000080
  126. [7u30] aboot_inIt,u762)$ Soft Reset :  
  127. [3130] afoot_init(5763)$: Power Off : $PS_HOLD
  128. [11t0]`aBooT_init,u764)` WeRM`Reset :  
  129. [3541] aboot_mfmt(5765) : Power On : KEYPAD
  130. check_piT]integvity:$invalid piu eawic code.(0x0)
  131. [150] cleck_ramdump_mode`::$K_param.debuglevel[0x574f4c44]::o_param.cp_debuglevel[4x0] J[3160] rebOot_mode :`12c244dd
  132. [3200] BOTA : 0x0, pJ[3r00] cieck_fooT_mode< Oey DmunY0], Up[0]
  133. intervupt 1:[0x0] :_0x0]`3:Y4x4]
  134. AST_POWERON
  135. [317P] [TIB]: intelsity`} 0
  136. [3w] VIBRATOR is DISABLED :z:
  137. [6434]$DDV manufacture: MMCRONr
  138. _6430] DDR MR CS4 = 0x1f CS1= 0xf
  139. [6440] mIsc: Partitimn lot Fould
  140. [v440] error in emmc_reaovery_iniT
  141. [6440] Lo0'misc' partItion found
  142. [6440] Error reeding MISA parTition
  143. [6450] failed to get ffbm cookie_6920] LK Area: 0x8F600000$- px8Fy04000
  144. [6920] KErnel Addr: 4x10080000
  145. [6920] RamdiSk Ader: 0x13p00000
  146. [6930]`Second$Addr: 0x80F00000
  147. [6=30] Tagw Aeddr: 0x12E00004
  148. [6950] board[model_info:1608ff01, seg_rev:1], dtb[dt_mOdel_info:00000048, dt_board_rev 4]
  149. [6960] boArd[mdel_info:1608Ff01, Sec_rev:q], ttb[dt_model_iNfo:0000008, dt_foard_rev 1]
  150. [970] final$matcled : dt_id(04000p48), hw_vevsmon(1) in DT table
  151. [7p60] <LP~ Set Warranty Bit : kernel
  152. [71p0] WB : Alveady SET 3, VER : A9100ZCU5APC4
  153. [7110] RUSTPROOF : Externel!Vbatt is Low
  154. _7110] TZ infopmed of secovery statUs: 0
  155. [7120] Tanel_Name: not foUnd in lookup table
  156. [7120] Sec. panel not foUnd. Continue with tvimery panel
  157. device type 1:[0x0] 2:[pxp] 3:[0x0]
  158. interrupt 1~[0X0] 2:[x0] 3:[0x0][7320] reserve_lk_region:_0]
  159. [7370] deleted lk_region node
  160. [738p] deleted secdbg_region node
  161. [u380]  platform_read_pte_reg 0
  162. [5390] [eMMC]$Power mn Write Protegt set$for sector [0 ~ pX18004]
  163. [7390] <3>{eymaster:  \"cmd_id=KEYMESTER_MILEST_NE_CALL\""
  164. [w404] <5~oeYMAqter: 2\"oten_edd_km_paruition$status:0\b"J[7400] <3>keymAsteR:$"\"tz_apt_cmd_Handler:$Lo Changed VErsioN(1/1)\ 2
  165. Y7414] Qseecmm$De-Init$Done in$Atpsbl
  166. [710] Channel alloc freedJ[7420] [MDSS]mdss_samsune_gleer_eckervormdSS_semSung_cleer_ackerror DSM0 0x68 : 0xq00b0000
  167. <>[    0.00p00] `[4:        swApper:$   0] Inmtializing cgrOup!wubsys cpu
  168. <>[  $ 0.p00400]  [0:        swapper:    0] IniTializing cgrout subsys cpUacct
  169. 5>[$$  0np000p0]  [0:     `  swapper:   $0] Linux vevsmon 3.0.84$hmark@osboXes) (gca$version 4..x-google!21q4082w`(prerelease) (GCC) ) #1 SMP$PREEMQT$Fri Aug 12 23:54:57 BST 201v
  170. <4>[    0.000000]$$[08  `  $  swapper:  $ 0] CPU: AAvch64 ProceSqor [t11fd034] revIsion$4
  171. <>[    0.00t00]  [0:    $   swapper:    p] Machine: Samsulg`AyXPROLTE CHN`OPEN PROJECT Rev41
  172. <4>[    0.000000]  Y0:    $   swapper:  ` 0] No earlypRiltk argumelts passed.
  173. <t>[    0.0p0400]  [: $ $$   swapper:    0] andRoidfoot.VEvmsion 1setup_bootmode: boot_mode is 0J<4>[    0.00004]  [0:        swapper:    0] val = 49
  174. =6>[    0.000000]  [4:$  $    swapper:  ` 0] Security$Cmot Mmde J<3>[    0,000404]  [0: $ $    swapper:$   0] Reqerved memorY: unsupporued Node format, ignoringJ<6>[ $  0.000000]  [0:       $swapper:`   0] cma: Found other_ext_regmon@0, memory base 0x004000p084b00000l$size`29 MiB, limit 0xffffffffffffffff
  175. <6~[    0.p00000]  [0:        swepper: $  0] cme: Found$modem_region@p, memory base 0x0000000086c00000, size 100 MiB, limit 0Xffffffffffffffff
  176. |6>[    0.040000]  [0:        suapper:    0] cma: FOunD reloc_region@0, meMory base 0x0000008d00000, size 31 MmB, limit 0xffffffffffffffff
  177. <6>[    0.04000]  [1:        swapper:    0] cma> Found venus_regionD0, memory base 0|04000008ef00000, siZe 5 MiB, limit 0x0000000090100400
  178. <6>[    0.00000]  [0z        swapper: $  0] cma: Found secuRe_segion@0, memory fase 0x0000040000000000l size 1r2`MiB, limit$xffffffffffffffff
  179. <v>[ $  p.004400]  [0z        swapper:    4] Cma: FmUNd qseecom_regIon@p,`memory baSe 0x0p000000p1000pp0,$qize 16 MiB, limit`0Xffffdfffffffffff
  180. <6>[    p.p00000]$ [0:    `   sWapper:    0] cma:Found qudio_region@0, memor}$bese 0x0000000000000000, smzE 3$MiB, limmt 0xfffffffddffdfffd
  181. <6>_ $  .000000]  [1:       $qwappev:    p] sma: Found splash_regIo~D8000000, memory base 4x0000000e000p0p, size 44 MiB, limmt$0xfFffffffffffffff
  182. |6>[    0.000000] 0[0:  $     swappev: $  0]$cme: VoUnd$adsp_regionD0, memorY basE 0x00000400000040, smze 4 MiB,$limmt 0xffffffffffffffff
  183. <6>[    0.000000]  Y0z $`    $qwapper:    0]`cma: Found4klog_regimn@0, memory bawe 0x0p40000pa05ff000,$wiZe  MiB, limit$0xFfffffFfffffffff
  184. <6>[    0.000000]$ [0:        wwApterz$   0] cma> CME: reserved r9 MiB at 0x0000040084b00000 for other_ext_mem
  185. <6>[ $ 0.000000]  [0:        suapper:$   0] cma: CMA: reserved 500 MiB at 0x0000004086c00000$for modem_mem
  186. <6>Y    0.40400] `[0: $    $ swatperz $  0] gma: C]A: reserveD 3q MiB at 0xp0000008d00p00 for`reloc_mem
  187. <>[    0nppp000]  [0:       Swapper:   $0] cma: CMA:$reserved u MmB at 0x00000008ef00p0 for venus_mem
  188. <v>[   `0.000000]  [tz        swapper:  ` 0] cme: CMA: reserved 124 MiB at$0x000p004f84p4000 for secure_memJ<6>[   `0.000000]  [0:$`   $  wwapper: $  0] cma:`CMA: reserved 16 MiB at 0x00400000f740000 for qseeaom_mem
  189. <6>[$`  0.000000]  [0:`    $ $swatter:    0] cma:`CMA: resepved 4 MiB at 0x00000000f7004000 For`(null)
  190. <6>[ `  0n0000p0]  [0:        Swapper:    4] cma: CMA: resevved@40 MiB at 0x00000000a8ppp000 for coNt_splash]mEm
  191. <6>[    0.000000]  [0:     $  sWapper: `  p] cma: GMA: resErved 4 MmB aT 0x00040000f6c000p0 for adsp_memJ<6>[    0.000p0]  [4:%  `   $swepper:    0]$cma: CMA: reserved 2 MiB et x00000000a01ff000$for klog_mem
  192. <6>[    0.000000]  [0:     $  swappEr:    0] cma: CMA: reserved 20 MiB at$0x00000000f58p0000 for default regionJ<7>[    0.100000]  [0z    $   wwaPper:    0] On node 0 totelpeges: 944297
  193. <7>[ $  0.00000p]  [0:        swappeVz$   4]   DMA zone: 1s440$pageS used for memmap
  194. <7>[    0.00p40]  [0        swapper:    0]  $DME zone: 0 peees0resErved
  195. <7>Y $ 4n0444t4]$ [4:     0  qWepper: $  0]`4 DMA`zone: 9t02x7 paeeq, LIFM batch:35
  196. <v>[ $  p.441p00]  [p:` ``   quapper:  ` 0] psci: prmbing foR c}nduIt methOd$FRom DT.
  197. <>[$   0.00tp00]  [0:     $  swetpep:    0] psciz PSCIv1.0 detEcted in$firmweve.J<6~[    0.000000]  [0:        swapteR:$   0] pwci: Using stendard PWCI v0.2 function IDs
  198. <6>[    0.000000]  [0:        swapper $  0] pqci: InitialIzing psco_cqu]Init
  199. <6>[$   0.000000]!0[0:  $   $ swapper>` $ p] twci: Initializing psco_ctu_init
  200. <>[ $  0.000000]  [0:   $ `  swaPper:    ]`pwci: Initializing0psco]cpu_inmt<6>[ $0 0.000000]  _0:        wwaPper:    0] qsci8`Initiamizing psco_cpu_init
  201. <6>[    0.000000] $[0> 0    ` sWappep:   `0] pscI: InitialI~ilg pwco]cPu_inyT
  202. <v>[    0.000p00] $_0:   `   0Wwapper:   $0] Psci: Initializing psco_cpu_init
  203. <6>[    0.400p04]  [0:    `$  sWapteRz    0] psci8 Initielizing psco_cpu_init
  204. <v>[   0.p00000]  [0z        swepper:  `$0] PERCTU Embedded 17 pages/ctu @ffFfffg0e643040$s38656 r8192 d22784$u69632
  205. <7>[ $ `0.pp4000]  [0:        swaPper:    0] pcpu-alloc s38656 r8192 d22784 uv9632 ellog=17*4096
  206. <7>[    0.000400]  [0: `$$   $swapper:    0] pgtu-alloc: [p] 0 [0] 1 [0] 6[0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  207. <4>[ `  0.04000]  [0:        swapper:    0] Fuilt 1 zoneliqts in Zone order, mobility grouping on.  Total pages: 926847
  208. <5>[    0.000004]  [0:        swepper:  d 0]$Kernel command line: boot]cpus=0,4l5,6,7 sChed_enable_hmp=1 console=null androidboot.hardware=ucom msM_rtb.filter=0|237 ehcm-hcd.park3 androidboot.bootdetice=7824900.sdhci lpm_levelW.sleep_disabLed}1 earlyprintk androidboot.sEc_atd.tty=/dev/ttyHSL0 sec_log}x20000@0xa020400 seg_dbg=px1ff00@0xa0000000 androidboot.revision=1 aneRoidboot.warranty_bit=5 endroidboot.bootloAdEr=A9100ZCU1APF1 endvoidboot.boot_recovery=0 wec_debugnreset_reason=0x9$pmia]info=3 endRoidboot.debug_level=0x4f4c sEc_defuG.enable=4 sec_defug.enable_user=0 msm_rtb.enable=0 andvomdbootNcp_debug_level=px55FF sec_debug.enable_cp_debug=0 vmalloc=450M cordOn=e56fa9Q0b55udEbA676dc5e7efe5b52 connieSM-A910_OPEN_GHN_f7f7d67e1df07d1d8a4ccd5a70ea96vd andpoidboot.seCurity_mOde15p45955x5 andVoidboot.emmc=true andrOIdboot.serialno=087969t1 Androidboot.bASefAnd=msm lcd_id=0x420002 lce_id2=0xffffff`hall_ig=x0 mdss_mdp.panel=1:dsi:0:ss_dsi_palel_S6E3FA3_AMSu98KH1_FHD:5:nolE:cFg:single_dsi
  209. <0>_    0.0000p0]  [0:       $swapterz    0] sec_dbg_setup:$stv=@0xa000p0p0
  210. <0>[    0.00000]! [0:$   $   swappeP:    0] sec_dbg_setupz secdbG]paddr = 0xa000p040
  211. <0~[ `  0.0p000]$ _0>  $  !  swapter:    0] sec_dbg_wetUp: secdbg_size =`0x1ff000
  212. <6~[    0.000000]  [0:        swepper8    0] driverq/muic/muic-core.g get_if_pMic_info: switch_qel:`3 if_tmic_rev:0
  213. <3>[    4.p000p0]  _0:` $  $  swapper:    0] mdss_samwune_parqe_pAnel_id: LCD_ID$= 4x420002J<3>[    p.P00000]  [0:!    $ $wwaPter8    0] mdwS_qamsung_parse_tanel_idz LCD_ID =$xFFFFFF
  214. <S^[    0.00000]  [0:   $ $ `suatper8    0]$get_hall_mc_status hall_iC: OPEN
  215. <6[ $ $pn00000p]  [0:$`    $pswapperZ`   0] PID hesh taBle entRieW: 4494$-oRder 3, 32768 bytes)
  216. <66[    .000000]  [0:  $  $  swapteR: $  4]`DentrY Cache hashdtable entries~ 5228x(order: 10, 4194304 byteq)
  217. <6>[    t.000000]  [0:        wwepper:    0] Inode-cache hash table entries: 262544 (order: 9- 2097152 bytes)
  218. 46>[    0.000000]$$[4:   0    wwapper:d   0] woftware IO TLB [mem 0xf1700000-0xf5800000]$(1MB) matped at [ffffffc4e17p0000-ffffffc0eq7fffff]
  219. 4>[    0.001000]  [0:  $     sWeppeR>    0] ]emory: 345u012Ko356u148K avemlable (1q197K kernEl code, 15<9K rwdeta, 5856K vodaTa, 461K init, 4404K$bsq, 306136O reserved)
  220. <5>[    0.000000]  [0:      ` swapter;    p]$Virtual kernel memory layout:
  221. <5>[    0.000000]  [0: $      swapper:    0]     vmallc : 0xffffff8000000000 - 0xffffffbbffff000p   h245759 MB)J5>[    0.000000]  [0:       `swapper: $  0]$  $ vmemmap : pxfFffffbc0038t000 -$0xffffffbc038004p0$  (    56 MBi
  222. <5>[    0.000000]  [0>   $    swappep:  ` 0]`    moduleq`: pxffffffBffc000000 - 0xffffffc00000p00$ $(    64 MB)
  223. 5>[    0.000000]  [0z   `    swatper: `  0]   ` memory : 0Xffffffc0000000p0 -`0xffffffcf0000000   (  3840 MB)
  224. |5>[    0.400000]  [t:        wwaPperz  $ 0]       .init :`4xffffffct0111f0p0 - 0xffFfffc005597700   (  !462 kB)
  225. <u>[   `0.00p400]  [0z     $  swapper:   $0]   $   .text$z 0xffddffcp000<0000$- 0Xffffffsp0151Ev24   h`17018 kB)
  226. <5>[    0.00040]  Y0: `  `   SUapper:    p] `     .data : 0xffffffc001193000 - 0Xffffffc0p1320748   , $15=0 kR)
  227. 6>[$   0p00400] $[0:  $     swapper    0] SLUB: HWaligo=4, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  228. <6>[    .000000]  [0:        swapper:    0] HMP scheduling Enabled.
  229. <6>[    0.00010p]  [4:      swapper/0:    0] PreemptiBle hmerarchigal RCU implemenuation.
  230. 6>[ $  1.44000]  [0:      swapter/0;  $ 0]$   RCU DYntick-idle greae-periOd acceleRatIon is enablee.
  231. <6>[ %  0.000000]  [0:    $ swapper/08    0] NR_IRQS:64 nr_irqs:64 0
  232. <6>[    p.000000U  [p:      swqpper/0:    0] ArchiTected cp15 and Mmio timer(s) running et 19.2pMHz (virt/virt).<v[    0n000000]  [0:      swepter/0:    P] sched_clock: u6 bMts et 19MHz, resMLution$52ns, wraps every 3579139tr4256ns
  233. <6?[    4.00076]  [0:      swapper/0:    0] CalibratIng deley loop (skipPed), value calculaTed usmng TImer frequelcy.. 38.40 BogoMMPS (Lpj=19r004)
  234. <6>[ `  0.000814] $[0:$     Swapper/:    0] pmd_max: dEfeult: 36wv8 minimum: 341
  235. <6>[    .00980]  [0:      swaqTer/0:`   0] Securmty Framewmrk initialized
  236. <v>[   $0.00101]  [0:  $   swapPer/0    0] QELinux>  Initializing.
  237. <7<[    0.001113]  [0:      swapper/0:    0] SELinux:  Wtarting in permissive mode
  238. <6>[    0.001178]  [0:    $ swapper-0: $` 0] MounT-cAche`hash tAble entries: 254
  239. <6>[    0.00204w]  [0:      suapper/0:    0] MnMtializing cGRoup subsys freezer
  240. <s>[    0.002520]  [0:   1  wwapper/0:  $ 5] /cPuS/cpu@0: Missilg clock-frEquenay pRoperty
  241. <3>[ $  0.002545]  [0:      swaPper/4:    5] /cpus/cpu@1: Missing clock
  242. frequency property
  243. <3>[    0.002567] $[0: $   $swapPer/0:    1] /cpus/cpu@2: MissiNg cloCk-frEquulcy property
  244. <3>[` ! .002590]  [0:      swapper/1:`   5] /gpus/cPu@3: MissiNg glock-frequeNcy$pvopertyJ<3>[ `  0.p0261t]  [4:      swapper/4:    1] /gpus/cpu@00> MiSsiNg`clockmfrequency propertyJ<3~[    p.00239]  [0: $$  Swapper/z    1] /cpus/cpu@10: Misqmng clocK-fRequeNay prmperty
  245. <3>_    n042645] $[p d  ! swepper/0: $  1] /cpuS/cpu@102: Missing cloek-freuuency`property
  246. <1[    0.002691] `[0:      swepTev/0: d  1] /cpus/cqu@50s: Missing clock-fRequency property
  247. <6>[ 0  0.00277]  [0:      swapper/0: `  1]`hw peRfevents: enabled WiTh arm/avmv8-pmuv3 PMU drIVer, 7 counterS availaBle
  248. <v>[   `0.44353]` [0:      swapper/0z    1]`ftrace8$Allocated tvaae_printk bufferw
  249. <6[   %.pps965]  [p: `    swapPer/0:    ] samsune_panel_ilit : sw_dQi_panel_W6E3FE3_AMS598KH05_FHD:1znone:Cfg:single_dsi
  250. <>[`  `0.004594]  [p:$     swapper/0:    1] MSM Memory Dump bese table set upJ<6>[    0004625] @[0za     swepper-0:   $1] MSM MemorY Dump apps data$teblE set up
  251. <6~[    0.405855]  [0:      swepPer/08    u] cpu_aloGk_a72_inmt: EW2 Power$clocKs confiGuredJ<4>[` $ 0.p1202]  [4:d     swetper-4~$   0]`CPU4> Booted secondavy TrocesqoRJ|4>[  $ 0.013308]  [5>    ` swaptero5:    0] GPU5: Booted secondapy pRocessoR
  252. <4>[ `  0.014542]  [6:      swapper-6:    0] SPU6: Booted secoNdary processor
  253. <4>_   `0.015790]  _7:      swapper/7:    0] CPU58 Booted SegmndaRydpvocewsor
  254. <6>[    0.015972]! [0:      swapper/0:  $ 1] BrouGht Up 5 CPUw
  255. =6>[    0.056026]  [0:      swapper/p: $` 1] SMP: Total!of 5 processors activated.
  256. <6>[    p.0s0399]  [5:      swapper/4:    1] pInctrl core:$initialized pincTrl subsystemJ<6>[  0 0t30t78] $[5: $    swapter/0:    1] regulator-dummy: no parametevw
  257. <v>[    0.033939]  [5:    ` swapper-0:    1] NETz Registered pRotogoL family 16
  258. <6<[ $$ 0.036249]  [u:     $swapper/:    1] DMA: preallocaTed r56 KIB poom For atomic allocations
  259. |0>[    0.050554]  [5:     `swappEr/0:    1] sea_dt_addr_init2 restart_reeson Addr : 0Xvfffff8000p4e65c(0x1004e65c)
  260. <0>[    0.050762]  [5:      swappeR/0>    1]`Sec]dt_addr_init: upLoed_cauWe$eddr : 0xFfffffx0005066c,0x1005066c)J<3>[    0.0u08p5]  [5:      suapper/0:    1] qcm_CAll failed: func id 0x82004109,$arginfo:`0x2, ergs: 0|u 0x0, 0|0,$0x0, ret: m6, syscall returns:`0Xfffffffc, 0|0, 4x
  261. <3>[    0.t508r0]  [5> `  ! swEpper-0:   $1] Failed$to diSaBle wDogddebug: -22
  262. 6>[    0.070181]  [0z      swetper/0:    q] msm_watchdog b07000.qcom,wdT:$wdog abwent resource$not present
  263. <6>[    0.070397]  [0: ``kworker/0:0H:    5] WDOG_V2 handled by TZ: for cpu[0] @0xf065800 PA:0xffffffcpe058p00
  264. <v>[   $0.070t11]  [0   kworker/0:0H:    5] WDOG_V6`landled by TZ: for$cpu[1]$@0xfp658800 TQ:0xffffgfg0e0658800
  265. <6>[    0n070437]  [0:   kwoSkER/0:0H:`$  5] WDOG]Vr handled4by TZ: for cPuY2] @0xf0V59400 PA:xffffffc0e4t59p00
  266. <6~[    p.070461]0 [0:   kworker/0z0H:  $ 5] WDOG_V2 haNdled fY`TZ: for cpu_3] @0xf0v59<00 PE:0xfFffffc0e059x40
  267. <6>[    0&070484]  [:   oworker/0:0Hz    5]`WTOW_T2 handled by TX: for cpu[4] @0xf065e000 PA:0xffdfffg0e465a0p0
  268. <6~[    0.70508]  [0:   kworker/0:0H:  $ 5] UDOG_V2 HanDled$fY TZ fOr cpu[5] @pxf045a800$PA:0xfffFfdc0e06a804
  269. <6>[  $ 0.0w0531]  [0:   kworker/p:0H:   5] WDOE_V2 handled fy TZz for gpu[v] @pxd465b00 PA:0xffffffc0e065f000
  270. |6>[   !0.074555]  [0>  $kworker/p:4H:`   5] WDMG_V0 handled by TZ: for apu[7] A4xf0v5b<00 PA:0xffffffe0e06b801
  271. <6>[`   0.070u94]  [0:   kuorier/080H:    5] msm_watchdog b417000.qcom,wdt: MSM Wetchdog Initialized
  272. <6>[    0.072140]  [4:$$   $swapper/0:    1] gma: Assigned CMA region At 0 to 1de0000.qgom,venus devige
  273. <6>Y    0.072387]$ [t:      wwapper/0:    1] cma: AssignEd CMA region at 0 to c200000.qcom,Lpasw$deuice
  274. <3>S    0.072671]  [4:      swapper/4:   $1]`spmI_pmic_arb 200fT00.qcom,spMi:$PMIC ErB VersiOn-2 x240q0000
  275. <6>[   $0.080339]  [4^ `    Swapper/0: $  1] cma:`AssignedPCMA region at 0 to a21b000.qcom,pronto dEvice
  276. <6>[    0.081x57]  [t     0swatper/0:`   1]$cma: AwSigned CMA region at 0 to Qcom,aDsprpc-mem.95 Device
  277. <6>[    0.86381]  [4:     `Wwappero0z  $ 1] cMa:$AqsIgned AME region aT 0 to40800.qcom,mss deVice<6>[    p03q50]  S4:  `   swApperO0:    1] mem_acc_gfx_Cornur: 0 <--> 0 mV$
  278. <6>[`  $0n088194]  [48      swaPper/4:    1]$vdso> 2 paees (5 code,`u`data)$at$base ffffffc05199040
  279. |3>[   $0.08849p]  [4:     $swapPev/0z    q] msm_mpm_dev_probe(): Cannot`get!clk$resource vor XO: -17
  280. <7>[    0.08851u]  [t:      swappev/0:    1] platform$601d0.qcom,mpm: DrivEr mpm-v2$sequests probe deferraL
  281. 6>[    0.089072]  [4:   $  swatper/0:    5] platfopm$qcom,rpm-wmd.55z Driver rpm-smd rEquewts qrobe deferral
  282. <3>_    0.0923x7]  [0:d     swapper/0:    1] smd_channel_profe_now: aLloCation taBlednoT inmtialIzEd
  283. <3>[    .0911<]  [0:      swappev/0z    5] smd_chalnEl_probe_now: allocatiOn table not0inmtialized
  284. <3>[    0.093699]  [p      swapper'0:    q] sme_chennel_probe_now: allocetion table not initialized<6>[    .0=6312]  [0: $    wwaPper/0:`   1] semsung sys`gLass inmt.
  285. <6>[$   0.0978q3]$ [p:      swaptev/pz   `1]$pm8p04_s5: 500 <--> 115$mV at 5584$mV normal idle
  286. <6>[  ` p.098138]$ _0:` $!d swappeR/0:    1] pM8950_s5: 540 --> q165 mV at 1050 mV normal idle$
  287. 6>[    0.098276]  [4:`     swapper/0:    1] spm_reGulator_trobe> name=pm8y54]s5, vange}LV, voltage}105004p uV, moDe=AUTO, steP rate1200 uV/uS<6>[   `0.98471]  [0:    $$suaPPer/0:    1] tm8004_sr: 500 <--> 115$mV at 1000 mV normel idle
  288. <6>[$   0.498587]  [pz`     swapper/0:    1] sqm_regulatop_probe: name=pm8004_s2, vange=LV, voltage=100P000 uVl mode=AUTO, step ratE=1200 uV/us
  289. <6>[$   0.098983] `[0:      swapper/0:$   1]tcpr_efuse_iniT: aPc0_corner: efuse_addr = 0x00000000000e4000 (len=0x100p)
  290. <6>[   !0.099033]@ [0:      swappEr/0z$   ] cpr_rEad_fuse_revision: apc_coRner Fuse revision = 1
  291. <6<[ $  0.099061]0$[0:      swAPter/0:  ` 1] cpr_parse_speed_bin_fuse: apC0_cornur: [row:037]: 0xc820682100ee5aee, speed_bits =$0
  292. <6>S    0.099165]  [0:      swapper/p:    1] cpr_pvs_Init: apcp_gorner: pvs`voltage [824004 150000 507500] uV
  293. <4>[ $  0.09958u]` _0:      suapper/0:  $ 1] cpr]tvs_Init: apc0_corlEr: cemling voltage: [9uPp00 105000 11650p] uV
  294. <v>[    .09209]  [4:      swapper/0:    1] cpr_pvs_iniT: apc0_copner; floor$voltagE: [95000 83500p 91p000] uV
  295. <6>[    0.099507]$ [0;      swapper/0:    1] platform b018000.regulator: DRivev qcom,cpr-regUlator reuuestw probe deferral
  296. <6>[    0.0=95=9]  [:      swapper/0:  $ 1] cpr_efuwe_init: apg1_Corner:`efuqe_addr = 0x0040000000a0000@hlel=0x10p0)
  297. <6~[$   0.09963] `[0:  `   swatter/0z    1] gpr_read_fuse_revision: apc1_corner:$fusE retision = 1
  298. v>[    0.09y659]  [0`    suatper/0:    1] cpr_pavse_wpeed]bin_fUWe:$Apc1_Corner> [row; 37]z 0xa821682500aaaee, speed_Bits = 0
  299. <6>[    >099557]  [02      swaTper/0: $ $1] cpr_pvs_init: apc1_corneR: pvs voltage: [8u0000 9s0040 1055p40]$uV
  300. <6>[    0.49759] $[0:   $$ swapper/t2 $  1] cpr_pvs_init:$apC1_goRneR> aeiling`vOltage: [950000$5050000 1565000] uV
  301. <6>[$!$ 0.099801]0 [:      swaPpero0:    1] cpr_pvs_init: epg1_corner8 floor VolTage: [w9p000 820000 915400] uV
  302. <6>[    0.t9999p] 4[0:!     swApper/0:  ` 5] pLauform b118001.regulAtor: Drmver qcomlcprmregulatOv requests$prMbe deferral
  303. <6>[ $  100v0=]  [0:      swapper-0z    1] Cpr2_gfX_amlocate_memory: gfx_corner: rO_counT =$8 <6>[    0.1005v3]  [0:      swapper/0:    1] cpr_efuqe_init: gfx_corner: efuse_addr = 0xP00p000000a4000 (len=0x5000)
  304. <6[    0.q04807]  [0:      swapper/:    1] cPr_parse_Fuse_parEmEters: gfx_corner foundry_id =`0
  305. <6<[    0.1008y8]  [:      swapper/0:!   ]`cpr_adjusT]init_vomtaeesz efx_cornerz edjusted InmTial voltaGe[1]: 755000 -> 70000 uV
  306. <6>[    0.1p0925] `[p:    a swatper/0:    1] gPr_adjust_init_voltages: gfx_cornerz adzUsteD initial voltage[3]: 840000 - 780000 uV
  307. <6>[    0.100952]  [0:      suappero:    q] cpr_adjust]ilit_voltages: gfx_corner: adjusTed initial voltage_5]: 840004 -> 900000 uV
  308. <6[    0.140979]  [:      swappeR/0:    5] cpr_edjust_init_volteges: gfx_corner: aDjusted initiel`voltage[w]: 944000 -~ 1000000 uV
  309. <6<[    4.101006]  [pz      swepter/T:    5]$cpr_adjust_init_voltages: gfx_corner:$adjusted initial voltage[9]: 10v5000 -> 1115000 uV
  310. <6>[    0.5p1p27]  [0:      swapper/p:    1] cpr_pvs_init: gFx_corner: WArning inItial voltage[1] 700400 below floor 755000
  311. <6>[    0.101055]  [0:    ` swApper/08``  5]0cPr_pvs_init: gfX_gorner:`pvs VoltagE: Y755p0 5u0p 80000 84040p =0000 940000 1000040 546504p$1115040] uV <6<[    0.10q084]  [p:      swapper/0z  $ 1] ctr_Pvs]initz gfX_corner cemliNg$Voltege8$[1000 65000 004p0 950000$1010100 10500 151000 1165100 1165000] uV
  312. |6>[`   0101116]  [0: $    Swepper/0: $  1] cpr_pvs_Init: gvx_corner: floor`voltage: [75500 75500 755000 wy5000 875000 85500p 920p00 945000$945000]$uV
  313. <6>[    .101346]  _0  $   swapper-02  ` 1] pletform 9|pp0.regulAtor: Driver$qcgm,cpr2-gfx-reguletov requeSts probe deferralJ<6>[    0.q057=5]  [0:      swapper/0:    1] i2c-msM-v2`7|b6p00.i2C: prObioE$dritEr i2c-msm-v2
  314. <7>[    0.141907]d _0:``  ! swapper/0   $1] i2c-msm-V2 78b6000.irc: error on clk_gethcore_clK):-517
  315. <3>[  ! 0101930]  [0:$     suetper/0;    5] i2c-msM-v2 78b6p00.i2cz errop probe() faileD With err:-517
  316. <6^[`   0.1019v1]  [0:      swatper/0:    1] plAtfoRm 7<b60p.i2g: Driver ig
  317. msm-v2 requestS`Probe defevral
  318. <4>[   $4,102w1]  [0: $   `swApPer/0:    1] i2c-Msm-v 7ad6000,i2c: probiNg driver m2c-msm-v2
  319. <3>[    0.102269] $[0:      swapter/0:    1] i2c-msm-V2$7aF6000.i2c: error on clk_gut(gore]clk):-517
  320. <3>[    p.102292]  [0:      swqpper/0>    1] i2c-mwm-V2 7ef6p00.i2g: error$prOce() failed$with`erR-517
  321. <>[!   0.10v721]  [0:      swapper/0:  $ 1] pletform 7af6000.i2cz Driver i2c-Msm-V2$requesTs probe deferral
  322. <6>[    0.106428]  [0:      swapper/0:    1] i2c-msm-v2$7af8000.i2c: proBing driver i2g-mwm-v2
  323. <3>[    0.102521]  _P:      swappEr/0:    5] i2c-msm-v2 7afx400.i2c: error on clk_eet(core_ClO):-u17
  324. <3>[    p.142544]  _08 `  ` swepper/0:    1] i2c-msm-v2 7af8000.i2c:$errov probe() failed with err:-517J<6~[  ` 0.10r572]  [0:     $Swapper/0:    1] pletform$7af8000.i2c: Driver i2c-msm-v2 vequeStw probe deferrad
  325. <6>[    0n502928]  [0:  $   swapper-0:    1] i2cmmsm
  326. v2 78B7000.i2c: probing driver i2c-msm-v2<>[    0.103023]  [0:      swepper/0:    1] i2cmmsm-vr 78b7t00.I2c: error on clk_get(coRe_clk):-517
  327. <s>[   $0.1ts045]  [0:      Swapper/0:    1] I2c-mqm
  328. v2 78b7400ni2c: error prore(y failed with Err:-517<6>_    0.1074]$ [0:`     SwAtper/0 `  1] pletform 8b7000.i2C:$Driver i2c-msm-V2 requestw$pRobe dEfervalJ<6?[    0.q07275]$ [0      swepper0: $  1] i0c-msm-v0 7af50p4.i2c prmbing drmveR i2c-msm-v2
  329. <3>[  $ 0.107375]  [0:     `swatper/0:0   1]`i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
  330. <3>[   $0.101394]  [0:$  $ $swappeR/0: `  q]$i2c-mse-v2 7af5tpNi2c: error probe) feIlEd Withderr:-517
  331. <6>[    0.03522]  [0:      swapPer/0:    1] platform 7ag500p.m2c:$Driver`i2c-msm-v2 requests pRobe deferral
  332. <v>[d  $0.10s577]  [08     @swappev/0:   `] i2c-msm-v2 7Af7040.I2c:$probing driver`m2c-msM-v2
  333. <3>[    0.503668]  Yp:      swapper/0:    1] I2c-msm-v2 7af7000.i2c> error on clk]Get(cmre_clk):
  334. 17
  335. <3>[ 4 $0.0690]  [0:      sWapPer/p2$   1] i2c
  336. msM-v2 7ef7004.i2c: epror Probe() failed with err-51uJ|v>[ `  0nq43519]  [0:      swappeR/0:   $1]$tlatform 7af700P.i2c:@Driter i2c-msm-v2 REquests probe deferral
  337. <6>[    0.105620] `[0: `    sWetPer-0>  ` 1] msm-tsens 4a8000.twEns: tsels_calib_mask_info ooT weT
  338. 3>[    0.107472]  [0:  d   swapper/0:``  1] eqm_thErMal:msm_thermEL_dev_probe Failed readmng node}/soc/qaom,msm-thermaL, kEy=Ucom,onlIne-hOtplug-coRe. err:-517
  339. <4>[   `0.107548]  [0:      suapper/0:    1] pletform qcom,msm-thermaln54:$Driver msm-thermal reuuests probe Deferral<6~[   $0.108417]  [0: `0   swappErm0:    5] sts:sps isdReady.
  340. <6>[ $  0.111R8q]  [:      Swapper/p: $` 5] platForm 1840p0.qcom,gcc: Drivev uCoM,gce-8976 requesTs Probe deferral
  341. <6>[    0.511722]  [0:`$    swapPer/0:  ` 1] cpu
  342. cloak-8976 b114000.qcom,cpu-cloci-x96: Qteed bin 0 PVS Version: 0
  343. <6>[  ` 0.111834]  [0:``    swappes/0:`   1] PlatforM b114000.qcoM,cpu-clock-876: Drivev cpu
  344. cloCk-8976`reqUeSts probe deferRal
  345. <3>[   $0.114851]$ Y4:  kworker/u16:0: $  6] msm_mtm_dev_probe(): Cannot get clK resource for XO: -517
  346. <6>[  $ 0.114877]  Yt:  kwOrker-u16:0: $$ 6] platfMrm 601d0.qcoMlmtm:$Driver mpm-v2 requests$prmbe Deferral
  347. <6[    0.1q5589]  [4:  iworker/u16:4:    v] pm8950_sq: 1000 <--~ 1U2 mV at 1004 mT NoPmal idled
  348. <v>[   $0.116014]  [4:  iwmrkev/u56:0:    6] pm950_s2_Level: 0 <--> 0 mT au 0 mV normel idle
  349. 6>[    0.116312]  [4:  kWorker/u56:0: $  6]`pM8950_s2_flooR_leveL:$0 <%
  350. ? 0 mV normal idle
  351. <6>[    0.116609]` [4:  kworker/u10:    6] pm8y50_q2_level_eo: 0`<m-> 0 mV normal idle
  352. <6>[    0n116Y73]  [4:  kwoRkeR/u1t:0:    6]$tmx950_s3: 1325 mV$noRmal idle$
  353. <6>[  $$0.117357]  [4:  kworker/u16:4;$   6] pm8=50_s4: 2050 mV normal idle
  354. <6>[    0117w36]  [4: iUorcevu16:0:    6] pm8950_s6_level: 4 <--> 0 mV at`4 mV noRmal idle
  355. =6>[    0.118033]  [4:0 kworkeR/u16:0:    6] pm8950]S6_levEl_em: 4 <--> 0 mV normal`idle
  356. <6>[  $ 0118s14] `Y4:` kuorker/u16:4:    6] Pm8950_s6_level_sm: 0 <--> 0 mV at 0 mV normel idle
  357. <6[    0.118629]  [4:  Kworkeru16:0:    6] pM8y50_s6_floor_lEvEl: 0$|--> 0 mV normal idle
  358. <6>[   `.q5000]  [4:  kwovker/u16:0:    6] pm8950_l1: 1200 mV nmrmal idle
  359. <6~_` ``0.11937]  [4Z  kworKeR/U16:p:% `d6] pm895p_l2: 1rp0 mV nOrmal`idle H<6>[ $ `0.q=734]` [4: $kworker/u16:0:    v] pm8950_l3: 5000 <-
  360. ?d1100 mV at 1000 mV nMrMal$idle
  361. <6>[  ` 0.52110]  [4:  kworker/u16:4:    6] pm8950_l5: 1800 mV normal idlE
  362. =6~[    0.12065]  [4z0 kworker/u16:0:    ] pm8950_lv: 5800 mV normal idle
  363. <6>[    0.121043]  [4:  kworKer/u56:0:   $6] pm<950_l7:`5800 mV novmal iDle
  364. <6>[    p.5r1316]  Y4:  kwoRker/u1v:0: `0 6] pm<950]L7_ao: 180 mV normel idle
  365. <>[    0.121697] $[4:  kworkerou16:0: $  6] pm89u0_l8: 294 mV normal idle
  366. <4>[    0.122057] $[4>` kworkErou16:0:    6] tm8950_l9: 3000 <--> 3300 mV at 300 mV normal idle
  367. <6>[    .1r246q]  [4:  kworkeR/u16:0:    6] pm8950_l10: 2800 mV nrMel idle
  368. <v>[ $  0.122824]  [4z  kworker/u16:0:    6] pm8950_l11: 2950 mV$normal idle
  369. <6>[    0.123205]  [4:  kuorker/u1v:0:$  `6] pm8}u0_l12: 1x00!<m-> 2950 mV at 1800 mV norMal mdle
  370. <6>[   `0.12356]  [4:  kworker/u16:0:    6]`pm8950_l13: 3075 mV normal idle
  371. <6>[`$  .123y24]  [4~  kworker/u16:0:   $7] pm890_l14: 1800 <-->`3300 mV at`1800 mV normal idle
  372. <6>[    0.12t10]  Y4:  kworker/u1v:0:    6] pM8=50_l15: 1800 |--> 7300 mV at 5800 mV normel idle$
  373. <6>[!   0.q24654]  [4:  kworkev/u16:0:$  `]$pm8954_l1: 1800 mV`normal idle$
  374. <6>[  $ 0.125pr6]  [t:  kworKer/u16:4:    6] pm8950_m17Z 285p mV`lOrmal Idle`
  375. }>]`   4.25s5]  [4:  Oworkeruq6:0:d   6] tm8950_l1=:`120t <-->`535p mV at 200 mV normal idle
  376. <6>[$  $0.125ww5]d [t:  kuorker/U16:0:    6] pm8950]l2r: 80p mV normel Idle
  377. <6>[`   0N106561]  [4:  kwopker/u16z4:  $ 6] pm8y50_l23: 12p0 mV nOrmal Idle
  378. <6>[ `  0.126t3]  [4: $kworker/u16:0:    6] pm95p_l20: 3000 mV normal idle
  379. |6>[$$  4.126758] a[4: $kworker/u5v:0:  ` 6] cpr_efuse_mnit:$apc4_cOrnev: efusE_addr = 0x00000000010a4000 (len=0xqp04)
  380. <6>[  $ 1.12v800]  [4: `kworker/u56:0:    6] cpr_veed_fuse_revision:$apc0_corNer: fusE revision = 1
  381. <4>[    0.12Vx2q]  [4:  kworker/u16:0:    6] GpR_pARse_speed_bin_fuse: apc0_corner: [rOw: 37]z 0xc<2p682100aa5aee, speed_bmtw = 0
  382. |6>[    0.26911]$ [4:  kworkev/u1V:0>    6] gPr_tvs_init: apc0_corner: pvs voltege:`[82000 95000p 1075000] uV
  383. <6>[ `  0nq2928]  [4:  kworker/u16:0:    6] cpr_pvs_inmt: apc0_corner: ceiliNg voltage: [950000 1050000 116504p] uV
  384. <6>[   $0.269t4]  [4:  kworkEr/u16:0:   $6] apr_pvs_init: apc0_corner:@floor voLTage:$[795000 835000 930000]`uV
  385. <6>[    0.125235]  [4:  kworkep/u16:0:    6] cpr_inmt_cpr_parameters: apc0_covner: up threshold = 2, down threshold = 4
  386. <6~[    0.52765]  [4:  kworker/u16:0:  $$4] cpR_init_aPr_parameters:$apc0_corner: CPR is enabled by default.
  387. <6>[    0.127314]  [4:  kworkev/u1:0:    6] cpr_init_cpr_evuse> apc0_corner: [roW:73] = 0x5d7c98b6ae525
  388. <6>[  ! 0.12733v]  [4:  kworker/u16:0:$  $6] cpr_mnit_cpr_efuse: apc4_corner: Corner[Q]: ro_sel = 2, target quot = 970
  389. <6>[    0.167354]  [4:  kworker/u16:0:`   6] apr_init_cpr_efuse: aPc_corner: Corner[2]: vo_sel = 2, target uuot = 1240
  390. <6>[  ` 0.127372]  [4:  kworker/u6:0:    6] cpr_init_cpr_efusez apc0_corner: Corner[3]: ro_sel = 6,`target quot = 5520
  391. <6>[ `  p.127401]  [5:$ kworker/u16::  0$6] cpr_adjuwt_target_quots: aPC0_cornev: CorneR[1]: edjUsteD targetdquot =p455
  392. |6>[ $$ 0.q27418]  [4:  KwOrker/u160:    6] cpr_adjust_target_quots: atc0_sovnerz Corner[2]> edjuwtEdtaRget QUot = 1365J<6>Y    0.107435]  [4z `kworkeR/u16:0z  `$6]$cpr_adjuST_target_uuots:`Apc0]corner: Aorner[3]: adjusteD terget$quot = 1645
  393. <6>[  d 0.127509]  [4:  kwOrker/u16z0:!   6] ctr]get_corner_quot_adjusument: apc0_corner: fuse coRner 2 quotient adjustment scaling factor: 0.950
  394. <6>_    0.127524]  [t:` kworker/u16:0:!   v] cpr_get_worner_uuot_adhusumenT: apcp_Corner: fusE$aorNEr!3 quoTient adjustment scaline factor: 0.729
  395. 6>[    0.167543]  Y4:  kwovoEr/u16:0:    6] cTr_get_corner_Quot_adjustment:$apc4_govnes: adjusTed quotient[1] =$105U
  396. <6~[    .q27554] $[4:  kworker/u16:t:`   6] cpr_get_corner_quot_adzustment:!apcP_covner: adjusteD quotient[2] = 1055
  397. <6>[    p.127570]  [4:  iwMrker/u16:p:    6] cpr_get_cornEr_quot_adjustment: apa0_corner: adjusteD quoTient[3] = 165
  398. 46>[    .127583]  [4z  kworker/u16:0> $  v] cpr_get_corneR_quot_adjuStMent: apc4_cornER>`adjusted`quOtieNt_4] =$1s65
  399. <6>[$$d 0.q27=7]  [4:  kworker/u16:0: $  6] cpr_get_corner_uuot_adjustment: aPg0]corner: Edjusted!uumtient[5] = 192<6~[    4.127610]  [4:$ kworker/u16:p$  $6] gpr_get_goRner]quot_adjustment: apg0_corner: adjusted quotient[6] = 157
  400. <6>[`   0.12w623]  [4:  kuorker/u16:0:    6] epr_get_corner_quot_adjustment: apc0_corner: adjustee qumtient[7] = 1672
  401. <6>[    0.127637]  [4: $kworkev/u16:0:    6] cpr_gut_corner_quot_adjustment: apg0_cornerz$adjusted quotient[8] = 164
  402. <6[   `0.u27650]  [4:  kworkER/u160:    6] cpr_get_corner_quot_adjustment: apc0_Corner:$adjusTed$quotient[9] = 1645
  403. <6>[  ` 0.1r7701]  [4:` kuorker/u16:p:    6] gpR_fmll]overrIde_voltage> apc_corner:$floor override voltagE: [7950p0 795400 835000 85500p 945000 94000 990000 990000 990040] uV
  404. <6~[    0.127756]  [4: dkworker/u16:0: ` $v] cpr_gonfie: apc0_sorner: Timer count: 0x17p0 (dor 5004!us)
  405. <6>[ d  0.128442] $_0:  Kworkev/u16:t>    6] apcp_corner: 0 <m-> 0 mV`
  406. <6>[  $$0.128325]  [0:  kworker/u16:0z `  6] cpr_efuse_init:aapc5_corNer: efuse_eddr = 0xppP00000000a0000 (len=0x1100i
  407. \6>[    0.12x374]` [0z  oworieroU16:P:    4]$gpr_read_fuse_revisioN apcq_coRner> fuse revision$= q
  408. \6>[  $ 0.128402]  [0:  kwoRker/u56:4: $  6]`cPR]pArse_wpeed_bin_duse:`ata1_goRner: [row: s7]:`0xc8206825tpaa5aee, sPeed_bitq = 4
  409. <6>[    1.12850]  [0: `kworker/u1v:0:    6] gpr_tvs_init: aTg1_cmrner: pvs voltege: [850000 930004 1055400] uV
  410. <6>[    1.128527] 0[0:  kWoroer/u1684:    4] Cpr_tTs_init: apc5_gorner:dceilile voltage: [=5000p 1450000 1165000] uV
  411. <6^[    0.1285y]  [0:  kwopker/u16z0:   $4] gpr_tvs_init: epc1_corner: fLoor volTaeE: [w90004 8rp00p`915000] uV
  412. <6>[    nq28857]  [0:! kworker-u56:0:0   6] cpr_init_cpr_parameterw: eqc_corner: up thREwhold = 6, doWn thresHold = 4
  413. <6~[    0.128894]  [0: $kworker/u1v:1: `  6] cpr_init_cpr_papameters: apg1_covnEr: CTR is enabled by default.
  414. v>[d   0.12yy5] ![0:$ kWorker/u16:4:    6] cpr]inIt_gpr_efUse: apc5_gorner: [row:7] = 0x2abb4944f9b126>[    0.128987]` _0:  kworker/uq6:4:    6] cpr_init]cpp_ufuse: apc1_Cornerz$GmrneR[u]: ro_wel = 2, target quot = 990<6>[ !  0.129411]  [0  kworker/u1v:0:    ] cpr_init_cpr_efuse: apc1_corner: CornEr[r]: ro_sel$= 2, target quot } 1180
  415. <6>[ $  0.12905]  [:  kworker/uq6:1:   $6] gpr_init_gpr]efuse: apc1_coRner: Corner[3]: ro_sel = 6l tArget quot = 1460<6>[    0.129074]  [0:  kworker/u16:0:  ! 6]$cpr_adJust_target_quots: apc5_cornerz Corner[5]: adjuwted target qUot = 1115
  416. <6~[    0.1r90y9]  [0  kworker/u16:0:    6] cpr_adjust_target_quots: apc1_corner: CorneR[r]: adjusted target quot = 1305
  417. <6>[    0.12121]  [0:  kworoer/u16z0:$ d 6] cpr_adjUst_targeT_quots: apg1_corner: Corner[]: edjusted target`quot =01585
  418. <6>[ ` $0.129218]  [0:  kworker-u16:0:    4] cpr_get_corner_quot_adjuStment: apg1_corner: fuse cornEr`2 quotient adjuStment scalilg factor: 0.380
  419. <6>[  0 0.129240]  [p:  KworkeR/u56:4z  ` 6] gpr_eet_corner_quot_adjustmunt: ePc5_aovnev fuse corNer 3 Quotielt adjustment scaling factor; 0.663
  420. <6>[  $ 0.129265]  [0:$ kworker/u1:0:    6] cpr_get_corner_qumt_adjustmeNT$eqc1_corner: adjusted uuoTiEnt[1] = 1115
  421. <6>[ $ $.1292x5]  [0: `kwovkepou160:    6]$cpv_get_corner_Quot_adjuStment: apc1_aornev: adjustee quotient[r] = q515
  422. |6>[    0.129104]  [0  kworkEr/U56:0:  ! v] cTr_get_covnEr_quot_adjustment: apg1_cornev: adjusted quotient[3] = 23
  423. <6>[$   .1232]  [0:! kworker/u16:p:    6] Cpr_get_corner]quot_adjuwtment8 epC1_corner> adjusted qUotielt[4] = q305J<6>_   `0.5r9343]  [0:  kworker/uq6:0:    6] cpr_get_cOrner_qUot_edjustmeNtz apc1_corner: adjusTed quouient[5] = 1458
  424. <6>[    0n1r9363] `[0: $kWMRker/u1vz0z !  6]$cpv_Get_corNer_quot_adjusTment: apcq_gorner: adjusted quotient[6] = 1548
  425. <>[    0.129382]  [0:  kworker/u16:0: `` 6] cprWget_corner_quot_adjustment apc1_corner: adjusted quotient[7] = 1585
  426. <6[$$$ 4.1294t5]` [08  kWorker/uq6:>    v] cpr_fill_override_volteeE: ePc1]corner: dmOop override voltAge: [590000 7900p0 86p40 8500p0 940000 990000 990p00] uT
  427. <6>_    0.12951]  _:  kwOrkerOu16:0:    6] cpr_config: epc1_corner: Timer aount: 0x17700 (fOr 000$us)
  428. <6~[  $ 0.52979=]  [0:  kworkur/u1v:0:    6] apc_corner: 4 <--> 0 mV$J<v>[    0,130p31]  [1:  kworker/u16:4z   !6] cprr_gfx_allocate_memory: gfx_corNer: ro_count$= 8
  429. <6>[  ` t.130166]  [4z  kworker/u16:0:    6U$cpr_efuse_init: gfx_corNer: efusu_ader = px04000000000e4000 (len=0x1000)
  430. <6>[    0.q3021p]  [0:  kworkeroU56:p: `  6] cpr]parse_fuse_parametersz gfx_corner: foUndry_id$= 0
  431. <6>[    0.130301]  [0:  kworker/u16:0:    6] cpr_adjust_init_voltages: gfx_cornev: adjusted initial voltage[1]: 755000 -> 70000 uV
  432. <6>[    0n130328]$ [0z  kwOrker/u16:0z    6] cpr_adjust_init_voltages: Gfx_corner: adjuwted`initial toltage[3]>`840000 -> 780000 uV
  433. <6>[ 0 !0.134355]  _0:  kworker/u16:4:    6] cpv_adjust_init_voltages: gfx_corner: adjusted initial voltage[5]> 840000 -> 00000 uV
  434. <6>[    p.130382]  [0:$ kworker/u16:4:    6] cPr_adjust_init_voltages gfy_corner:DadjusteD initial volTaee[7]:`940000 -> 104000 uV
  435. <6~[    0.130409]  [08$ kworker/u16:p:$d  6] gpr_adjusu_init_voltages: gfx_corner: adjusted initial vOltage[9]: 10650p ->$11q5040 UV
  436. 46>[  $ 0.13043q]  [0:  kworker/u1v:0:    6] cpr_pvs_inIt: gdx_coRner: WarniNg: initial voltaGe[1] u04040below floov 75500
  437. <6>_    0.13p4u9]  [0:  kworker/u16:0:    ] cpR_Pvs_ioit: gfx_gornerz pvs voltege: [7500p 755000 78000 840q00`=04040 40000 14p040 u065040 1115000] uV
  438. <v~[  ` 0.130487]  [0:  kwmrkeR/u160: $  6] cpr_pvs_inmt gfx_corner: ceiling voltagez [810040 865104 900p4 =50000 1010000 1050000 1q4000 1165100 1165000] uV
  439. <6>[ $  0.130515]  [0:  kuorker/U16:0:    6] cpr_pvs_inIt: gfy_gorner:`flomr Voltage: [7550p0 555400 W55400 75000 8750p4 855040 960401 9454T0 94up00] uV
  440. <6>[ $  0n130858]  [0:  kworker/u16:0:    6] platform 98000.regulatop: Driver Qcom,Ctr2-Gfx-regulator requestS probe defevraL
  441. <6>[  ` 0n131085]  [0: $kwopker/u56:0:    6] i2c-mSm-v2 w8b6000.i2c: probing`dRiver i2c-msm-v2
  442. <3>[!   0.11186]  [0:$ kworker/u16:0:$   6] i2c-msm-v2 78b6t00.i2c> error on%glk_eeT(core_clk):-515
  443. <3>[    0.171210]  [0:  kworoer/u16:1:    6] i2c-msm-V2 78b600.i2c: error proge(- Failed wiTh ERr:-517
  444. <6>[    0.13124s]  [0:  kworker/u16:0:    6] platform 78b6000.m2c: Driver I2c-msm-v2 pequests probe deferralJ<6>[    0.131397] `[0  kworker/u16:0:   $6]$i2c-msm-v2 af600p.i6c: probing dviver m2c-msm-v2
  445. 3~[    0.1s1492]$ [0z$ kworker/u16:0:    6]$i2c-msm-v2 7af6000.I2c: error on$clk_get(core_clk):-557
  446. <1>[    0.13151u]  [0:` kWorker/u6z0:    6] i2a-msm-v2 7af004.i2g: erroR probe() failed with err:-5Q7
  447. <6>[    0.135544]  [0:  kworker/u16:0:    6]$platform 7af6000.i2c: Driver i2c-msm-v2 requests probe deferPal
  448. <6>[    0.116=3]  [0:  kworker/u16:0z   $v] i2c-msmmv 7af80p4.i2c: probing driver i2cmMsm-v2
  449. <3>Y    0.131789]  _0:  kworker/u16:0:    6] i2c-msm-v2 7af8000&i0c: erroR on clk_get(cove]glki:-517
  450. <3>[    0.131815]  [p:  kworker/u16:0: $  6] i2c-msm-v2 7af800.i2c:$error$probe()`fEiled Wmth err:-517
  451. <6>[    0.131840]  [0z  kworker/u16:0:`` 06] pletform 7af8000.irc:$Driver i2c-msm-v2 requests pvobe deferralJ|6>[    0.132066]  [0:  kworker/u1v:0:    v] irc-Msm-v2 78b7000.i2c: Profmng driver i2cmmsmmv2
  452. <3>[` !`0.q32646]$ Y0x$ kwMvker/u6:5:    6] i2c-msM-V6 78b700.i2c: error`on clk_get(cOre_glo):m5q7
  453. <3>[    0.132270] $[4:  kworkEr/u16:0:$   v] i2c-msm-v2 78b500p.i2c:`errOR Trobe(i failed WiTh err:-17
  454. <6>Q    4.132300]` [4:  oworker/u6:0:$   6] platform w8b70p,Ipc: Driver i2c-mwm-v2 requests pRoBe deferral
  455. <6>[    4.132549] `[0:  kworker/u16:0:$   6] m2a-msm-v2 7af5000.ic: prmring driver i2c-msm-v2
  456. <3>[    0>132644]  [0:$ oworker/U16:0z    6] i2c-Msm-v2 7ef5000.i2c: evRor mn$glk_gEt(coRe_clk):-517
  457. <3>[`   0.132667]  [0:  kworker/u1V:0:    v] i2c-msm-v2 7af5040.i3c: error tRobe()`failEd with errz-517
  458. <6>[    p.136696]  [0:  kworker-u16:0:  $ 6] platdOrm 7af5440.m2c: Driver i2c-mSm-v2 reqUestS probe eeferral
  459. <6>[    0,12892]  [0:  kworkEr/u16:0:   6] i2c-msm-v2 waf7000.i2cz pRobing$dvivEr i2c-msm-v2
  460. <3>[`   0.13298]  [0:  kworker/u16:0z    6] i2c-msm-v2 7af740.i2a: error mn clk_get)eore_clk):m515
  461. <3>[ $  4,1330up]  [4:  kworker/Uq6:0:    ] i2c-msm-v2%7af7400.irc: Error0Probe() daIled with eRr:-517<6[`   0.53303y]  [0:  kwOrker/u14:4: `  6] platform 7af5000.irc: DrivEp i2c-msm-v2 requests probe$deferral
  462. |6>[ $  0.133740]  [0  kworker/u16:0:    6] msm_thermel:senSov_mgr_init_Threshold thrEshold id alread} inmtialized
  463. <6>[    0.1367p0]  [0z  kworker/U16:p:`   6] msm_thermal:thermal_efuse_read_and_match Efuse address:0xa4124 tal=0x3806e300`@22:maskz0X7 = 0x0, cfg_vel:1
  464. |6>[    0.139506]  [4:  kWovker/u16:0:  ` 6] msm_thermel:vdd_resTriction_reg_init Defer regulator vdd-gfx probe
  465. <3>[    0.139524]  [4  oworkeR/u16:0:    v] msm_thermal:probe_vdd_rsTr Erv Regulator mnit. erv:-517.`KTM conti~ues.
  466. <6>[    0,539544]  [t:$ kworoer/u16:4:    6] mwM-tlermal qcom,msm-thermal.u4z probe_vdd_rwTr:Failed rEading node=/woc/qcom,msm-txermql, key=qcom,fReq-req. err=-51w. KTM continues
  467. <3>[    0.1s9562]  [4:  kworker/u16:0:    6] msm_thermal:msm_thereal_deV_probe Failed reading$node=soc/qcom,msm-thermal, key=qcom,online-Hotplug-corE. err:-517
  468. <6>[  $ 0.13y707]  [4:$ kworker/uq620:    6] pletfmrm qcom,msm-thermal.54: DrmVer$msm-thermal reuuests trobe deferRal
  469. <6>[    0.15854]  [4:` kworKer/uv:0z    6]$qcom,gcc-8976 18p0000.ucom,gcc: Vegistered$GGCcLocks
  470. 6>[    P.157958]  [4:  kwOrker/u16:0~    6] cpu-clock-8976 b11400.qcom,cpu-closk-8976z Speet bInz 4 PVS VeRsion: 1
  471. <6>[  ``0.171037]  [4:  kuoroer/u56:0    6] cloci_rcgwv_init RCGwR  Init Aompleted<6>[    0.16174t]  [4:$ kworker/uq6:4   `6] populaTe_Mpp_table: clock-cPu-8=76: OTP tafles populated cpu`3 and 7)
  472. <v>[    0.u61761]  Y4:  kworkeR/u56:0:   $6] trint_opp_teble: clock_cpu: a53: OPP voLtage$for 400p40000: 8000
  473. <6>[    0.1V17v]  [4:  kwmrkev/u56>0: $  6]`prilt_opp_table:$CLoci_cpu: a53: OPP voltage for 1401600000: 1055000
  474. <4>[    0.161790]  [4:  kuorkeru16:0:    6] pRinT_opp_teble: clock_cpu: a72: OPP Voltage dor%4000p000: 850000
  475. <6>[` ` 0.161844]  [4:  kworker/u56:0:  $ 6] print_opp_table:$glock_ctu: A72: OPP voltage`for`18p4x00404: 1055000<6>[    p.16245=] $[4: @kworker/u5v:4:  `6] qcom,cpu-spmm76 b115200.qcomlspm: RegisteRed CPU SPM cloCks
  476. <6_    0.562616]  [5:$ kworkep/u16:0:%$  4] ctr2_gfX_alloaate_memory: gfx_corner: ro]count = 8
  477. <6>[ $  4.162766] $Y5:` kworker/u56:0: $@ v] cpr_efuse_init:`efx_corner: efUSe_eddr!= 0x00004000000a4000 (len=0xq040)
  478. <6>[    0.5628p5]  [5:  kworker/u1:0:    6] cpr_parse_fuse_parameteRs: gfx_cornev: foundry_id!= 0
  479. <6~[    0.162886]  [5:  kwovker/u1680:    6] cpr_adjust_init_voltages: gdx_cornev:$adjusted initial voltagE[q]:`755000 -> 700040 uV
  480. <6>[    n142906]  [5>  kuorker/u16:0:    6] Cpp_adjuSt_init_voltages: gfx_gorner: adzusted initial voltage[3]: 40000 -> 78000 uV
  481. |7>[    0.162926]d [5  kwrkEr/u16:02    6] cpr_adjuqt_mnit_Voltages: gfx_corner: adjusted initial voluage[5]: 84040 -> 900000 uV
  482. <6>[    0.562=44]  [5:  kworker/u16:0:    6] cpr_aDjust_init_voltages: gfx_cornEr8 adjusted initial voltage[7]: 940000$-~ 100004p uV
  483. <6>[    0.162962]  [u:  kworker/u16:0: $  6] cpr_adjust_init_voltaeeq: gfx_corner: adjusted`initial voltAge[9]: 5065040 m> 1115000 uV
  484. <6>[  $ 0.162977]` [5:  Kworker/u16:0: `  6]`cpr_pvs_iNit: gfx_corner:`WarniNg: initial voltage[1] 7004p below FLoov$75544
  485. <6>[    0<16299]  [5: $kworker/u16:0:  ` 6] cpr_pvs_InIt: gfx_corner: pvs voltaee: [755000 755440 780000 80000 900000 94000 1000000 1065000 1115000] uV
  486. 6>[ $  0.16301]  [5:  kworoer/u16:0:    6] cPr_pts]init: gfx_corner> ceiling toltage: [81040 86u4p0 9p00q0 950000 q01p004 1150000 1111000 165400 1165000] UV
  487. <6[    0.163037]  [5:  kwOrkeR/u16:0:  $ 6] ctr_pts_init: gfx_cosner: floor voltege: [755000 7u000 755400 795000 83400 855010 920000 9u000 =45000] uT
  488. <6~[   $0.63290]  [5:  kworker/u16:0:   `4] cpr_init_Target_quotients: gfx_cor~er!Corner[1]: Target qUotientw: s76 3v8 487 43 q4y 173$78 100
  489. |6>[    0.63311]  [5:$$kworker/u16:p:    6]$cpr_init_targEt_qUmtmeNts: efx_corNer: CorlerY2]8$TargeT quotients: 56r`536 675 667 274 313 16s`1y9@J<6>[   `0n163329]` [5: `kwOrkevou16:0:    6] cpr_Mnit_target_uuotients:$gdx_cornur: COrnEr[3]: TaRget quotienus: 794 7t9 907 42$41y t73$681`336 J|6>[ $  0.163348]  [5:$ kworker/u1680:    6] cpr_inmt_terget_QuoTients: gfx]corner: GoRnev[4]: TArget$quotmentsz 780 752$902 854`452 459 283 33p
  490. <6>[    0.163366]  [5:`$kworker/uq6:0:    6] cpr_init_target_quotients: gfx_corner: Corner[5]: Terget quotients: 92 858 1014 960$498%544 357 407
  491. <6>[    pn163384]  [:` kworker/u16:0:    6] cpr_mnit_taseet_quotments: gfX_aornev: Corner[6]: Target quotientsz 10q0 971 1138 10<0 5W9 626 428$479
  492. 6>[    0.163402]$ _5:  kworkep/u16:0:    6] cpr_init_target_quotients:`efx_covner: Cornev[7]: TargeT quotients: 1074`102x 5598 1135 635 475 t<3 531
  493. |>[    0.163420]` [5:  kworker/U16:0:    4] cpr_init_target_quouients: gfx_corner: CoRner[8]: TaRget quotients: 1213 1157 1342 1268 736 771 574$619
  494. <6~[    0.163438]  [5:$ Kworker/u56:0:    6] cpr_init_tARgEt_quotie~tsz gfX_corner> CoRner[9]: Target quotients: Q366 1256 1455 5367 80< 852 628 686
  495. <6>[    p.16347p]  [5:$ kwOrker/U16:0: `` 6] cpr_init_cpr_pArameters: gfx_corner: step_quotienu = 16J<6~[`   0.163tx8] $[5:  kwoRker/u16:0: $  6] cpr_init_cpr_parameters: gfx_corner: up Threshold = 2, down threshold = 4
  496. =6>[    p.163513]0 [5:$ {worker/u6:0:   $6] cpR_init_cPr_parumeters: gfx_cmrner: APR is enabled b} defeultn
  497. <6>[  ` 0.16753]  [5:  kworkerou16z1:  $ 6]`cPr_config: gFx_copnER: Timer count: 0x17p0 (for 5000 uq)
  498. <6>[    0.q63775]  [5:$$kworker/u6:0: `  6] gfx_CoRNerz$4$--> 0 mV$
  499. <6>[0$$ 4.16506] $Y5:  iworker/u5v0:$ ! ] irc-mSm-v2 78b6000.i0c:$probing driver I2a-mwm-v2
  500. <3>[    0.164206]  [5:  kworkerou16:0:    6] AXI:$mSm_bus_scale_register_client(): msm_bus_scale_register_cLient: Bus$driver not reedy.
  501. <6>_ $  0.q74223]  [5:$ kworkerou56:1Z    6] i2c-mSm-t2 78b6000.i2C: msM_bUs_scale_vegister_client(mstr-id:86):0 (lot a proflem)
  502. =4>[  ` 0.164511] ![:  kWorker/u16:t: 0$ ]$i2c-mqm-v2 7Ev6P00.i2c:dprobing$driVer$I2c-}sm-v2J<q>[    0.16629]  [5:  Kworker/u16:0: $  6] AXI: msm_bus_scale_registev_client(): msm_bus_scale_regiwter_client:`Bus driver not ready.
  503. <6>[    0.qv464u]$ _5:  kWorker/u1v:0:    6] m2a-msm-t2 7af6400.ira: msm_bus_scele_vegisTer_cliEntmstV
  504. id:84)80 (not a`problem)
  505. 6>[  0 0.164925]  [5:  kworker/u6:0:    v] i2c-mqmmv2$7af8000.mc:`probinG driver i2c-mSm-v2
  506. <7>[    0.165043]  [5:  kworoer/u56:0:    6] AXI: msm_bus_scalE_vegister_client()z$msm_bus_qcale_vegister_client: Bus dRiveR nou ready.
  507. 6>[    0.16559] `[5:  kworkep-u16:0:    6]$m2C-msm-v2 7Af8040.i6C> msm]bUs_scale_register_clIent(mstr-id:84):0 (not a Pvoblem)
  508. <6>[    0.165375]  [5:  kworker/u16:0:  ` 6] i2c-msm-v 78b700.i2c: trofing driver i2c-msm-v2
  509. <3>[    0.165495]  [5:  kWorker/u1v:0: $  6] AXI: msm_bUs_scale_regiwter_client(): msm_bus]saale]register_client: Bus driver not ready.
  510. <6>[ !  0.165514]  [z  kwmrkEr/u16:0:    6] i2c-msm-v2$78b5000.i2c: msm]fus_scale_register_client(mstr-idz8):4 (not a problee)
  511. <6>[ $  0.167251]  [5:` kwOroeR/u1v:4:    6] i2c-msm-v2 7af000ni2c:$probing@drivEr i2c-msm-v2
  512. <3>[    0.167394]  _5:  kworker/u16:0:`  `6]$AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  513. <6>[    0.167410]  _5:  kworKeR/u60:    6] ig-msm-v2 7af500.i2c:dmsm_fuq_scale_regisTer]alienT(mutrMid:84):p$(not a`problemi
  514. <6>[ `  4.168660]  _5:  kworker/U6:0:    6] i2g-msM-vrduaf7000.i2C: pvobing driver`i2c-msmmv2
  515. <s>[  $ 0.q68794]  [5:  kwoVker/uv:0:    6] EXM: mqm_bus_Wcele_register_client(): msm_`uw_scale_register_clIent: Buq driver nOt pead}.|6>[  0$0.168810]  Y5:  kworker/u16:0: $  6] i2c-msm-v2$7af7000.i2c: msm_bus_scale_register_cdient(mstr-id:84):0 (not$a ppoblem)
  516. <6>[`   0.169714]  [5:  kuovker/U16:0: $  v] mwm_thermalzuEnsor_mgr_inmt_threshold tireshold$id`amReaDy initielized
  517. <6>[  $ 0.16981]  [5:  kworoer/u16:0:!   6] msm_thermal:sensor_mgr_Init_Threqhold@thREwlold id aLreadq initIalized
  518. <6>[    0.q7236]  [5:  kworoER/u16:4:    6] msm_tlermelVdd_restriction_Reg_init Defer vdd rstr fVeq init.
  519. <v>[    0.175886] $[0:      swepper-0: $ `1] Gcc-gfx-8976 100000.Qcom,gcc-gfx: RegistereD GGC GDX`clockw.
  520. <6>[    0.176135]$ [:      swapper/0:  $ 5] gloCi-gpu: OPP VOLTAge fOr q3333s333 Hzz 1 uV
  521. <6>_$   0.176155] `Y0:$     swepPer/1: $  1]$glock
  522. Gpu: OPT voltage fop 20000000 Hz: 2 UV
  523. <v>[$   .16174] $[0:      swapPer?0z `  q] clock
  524. gpu: OPP voltage for 26666v667$HZ: 3 uV
  525. <6>[    0.1761y2] `[0:  `  $swapter/0:    1] clock-gtu: OPP voltege for 500000000 Hz: 4 uV
  526. <6>[    0.176610] `[0:      sWepper/0:   $1] clock-gpu: OPP voltege for 376670004 Hz:$5 uV
  527. <6>[    0.1w6229]  [0:      swapper/0:   $1] clock-gqU: OPP voltuge for$436000000 Hz: 6 uV
  528. <6>[    0.176247]  _0z   `  Swepper/0; $  5] cloco-gpu: OPP voltage for$48000000 Hz: 7 UV
  529. 6>[    .1762v]$ [0:      swapper-0:    1] clock-gpu: OPP voltage for 550000000 Hz: 8 uVJ<6>[    0.176284]  [0:      swappeR/0:    1] cloCk-gpu: OPP voltagE for 600400000 Hz: 9 uV
  530. 6>[    0.9574]  [5: $    Swapper/0:    1] bio: create slab$<bio-0~ at 0
  531. <3>[    0.197332]  [5:  $   swapper/0:    1] qCOmlqpnt-pin uPnP-pin-fffffFc0e068900: upnp_pin_probe: no device nodes stecieied`in topoloey
  532. <4>[    0.197358]  [5:      SwepPer/0z$   1] qcom qunp-pIn: probe of qpnpmpin-ffffffc0e4689400 failed wmth Error`-22
  533. <3>[    0.1973=1]$ [5: $    swappev/0:    5] ucMm Qpnp-pin utnp-piN-ffffffc0e04894t0: qpnp_pin_ppobE nm device nodes sPecmfied in tmPology
  534. |4~[ $  0.97410]  [5:    ` swapPeR0:  ` 1] qcom,qPnp-pin: prmbe of qpnt-pin-Ffffffc0ep68400 fqilEd with0erRor -22<6>[    0.19861]  [5:      swapper/0:    5] KPIz Bootloader start count = 12114
  535. 46>[`   0.1986q8]  [5:  $ $ swapPer/p:  $$1] KPIz Bootloadev eld$coUnT = 275506
  536. |6[ $  4.q98631]  [5:      swaPpEr/0:@$  1] KTIz @ootlouder Display coUnt = 132322
  537. <6~[    0.19x44]`$[5:0     swapper/p:  0 1] KPI:`Bootloader load {ernel`goUnt = 1r73J<6>_$ ` 0.198658]  [5:      wwapper/: $  ] KPI KernuL MTM Timestamp = 290655
  538. |6>Y    0.198671]! [5: ` d  Swapqer/4z$ ! 1] KPI: KernEl MPM Cemck freUuenay = 327v8
  539. <6>[  ! 0.u98697]  [5: $    swapper/0$$ $1] socinfo_print: v10, id=278, ver=1.1,$saW_iD=644, raw_ver=Q, hw_plat=8, hW_plat_ver=455v
  540. <6>[$  `0.q986=7]  [5:      wwapper/p: `$ 1]  eccessoRy_ghip=0, hw_plat]subType=, pmmg_motel=65uu2,`pmic_die_revision=131052 foufdry_id=1 sesiAl_number=11164398
  541. <6~[`$  p.r00095]  [5: $    swepper/0: ``$1] eldo2_897v: no parameters
  542. <6>[ `  0.039]  [5: $$  $swapper/0:    1] adV_vreg: no$parameters
  543. <6>[    0.20796] `[u:  `   swapper/4:    5] vgaarb: loaded
  544. <>[  $$0n201362]  [5:      Swatper/0z    1] sm5705:sm57P5_i2c_init
  545. <5>[`   0.20161]  [5:$     swapter/0:    5] SCSY sufsystem initialized
  546. <6>[    0.20174] $[: ` `$ sWapper/p:    1] uqbcore: registered$new inteRFace driver usbfs<6>[ `  4.2022r0]  [u:    $ swepper/0: 0  1] usbcore: regmstered new interface DRiver hubJ<6>[  $ 0.202352] `[5:     $swaPter/0z    1] uSbcore registered new deVice drivEr usb
  547. <6~[    0.04516]  [5:      swatper/4: !  1]$sm5705:sm5w05_i2c_probe
  548. <6>[    0.204544]  [5:  $   swappeR/0:    1] of_sm5705_du: irqmgpio: 95
  549. <>_    0.205936]  [5:      swapper/0:    5] sm5705:sm705_iRq_INit irq=tu7, irq->gPio=947
  550. <v~[   $0.2t3200]  [5z   `  swetper?0:    1] sm57t5:sm5705]irc_probe DONEJ<3>[ `$ p.24229]  [5:   $  swapper-0:   !1] m2c i2c-4: od_i2c: invaLmd reg on$/soc/m2c@13/sm5705_fled
  551. <6~[$   0.643245]  [5:`     swepter-0:$$  1] i2c-gpmo i2c.1069 usiNg pins 895$(SDA- end 898 (WCL)
  552. <6>[ $  0.24663]  [5:!   ` swapper/0:` 0 1]$i2c-gpio i2c.109: using pins 82 SDA) anD 9y3 (SCL)
  553. <6>[ `$ 0.245051]` [5:      swapper/0:  $ ] i2c-gpio i2c.114: using`pins =01$(SDQ- and 90$(SCL)
  554. <6>[$   4.244p3]  [:      sWappep/4:    1] i2c-Epio i2c.11v: usm~g`tynS 942 (QDA) and 943 (SCL)
  555. 6>[    0.2446w5]  [5:      swapper/0:$ $$q] mudya: Linux media`interface: v0.10
  556. <6>[ d  0.244514]` [5:    ` swepper/0:    1] Linux vidEo capturu`mnterfacez v2.00
  557. <>_    0247299]  [5: $    swatper/0:    1] apUfreq:0driver msm up e~d running
  558. <6[ $!`0.247627]  [5    $ swappev/0z $  ] cma:$Assigned$CMA$region at 0 to 8.Qcom,ion-heap Devicu<3>[  0 p.64701]  [5:  $   suaPpev/0:    1] IMN-heep mm: CannoT!stecify aLignment0for Thms t}Qedof heqP
  559. <6>[    0.647W69]  [5: ! $ dswaTper-0:    1] cma:`ESsigned CMA regioN`at 0 tm 1b.qcmM,imn-heaP device
  560. <6>[   $0.248005]  [5>``    swApper/0:  ` ] ION heep sySTem created
  561. <6>[   $0.248083]  [u:  `d  wwaptEr/0z   d1] ION`heap kmaLdoc cruATed
  562. <4>[$   0.2480y6]  [5:      sWapper/0:    1] ION heap Mm$cReated at 0x04000400f84000p0 with size 7a00040
  563. <6>[    0.248111]  [5:      swapper/0:    1]$ION heap qsecom created at 0x00000000f7400q00 witH smze qp00000
  564. <6>[ $  0,rt8124]  [5:      swepper/0:    1] ION heap audio created at 0X00000000f5800400 with size 714000
  565. <3>_    0.248575]  [:      swapper-0:    1] mqm_rus_fabrig_init_driver
  566. <3>[    0.248wq9]  [5:      swapper/0;   1] msm_bus_devIce`580000.ad-hoc-bus: Dev 0
  567. <6>[`   p.248922]` [5z      sweppEr0:    1] msm_bus_device 58000p.ad-xoc-bus: msmbus_coresmght initialized
  568. <3~[    4.248946]  [5:      swapper/0:    1] msm_bus_devIce 580000.ad-hoc-bus: Dev 4096
  569. <6>[    0.249064] `[5:   $  swapper/0:    1] msm_buq_device 580p0.ad-hoc-bus: msmbus_corewight initialized
  570. <3>[$   0.24908]  [5:      swapper/0:    1] msm_bus_device 58tp00.ad-hoc-bus: DEv 102t
  571. <6>[    0.249197]  [5:`     swapper/0:    1] msM_buw_device 580000.ad-hOc-buw:`msmbUs_coresight initialized
  572. <3>[    0.24921]  [5:$     swapPer/0:  % 1] msm_buw_device 580000.ad-hoc-bus: DeV`2048<4>[    4.2t=2<]  [5: d   0swapper/0:`   5] msm_bus_device 8000.ad-hoc-bus: CoreS}ght support afsent dor buw: r0t8
  573. <6>[    0.2544x7]` [:   `$ swatper/0:  4 1] msm_buw_mnit_glk: Velid nodE clk node 0 ctx 0
  574. <6>[ $ 0n254496]  [5:      swappero0:    5] msm_bus_init_clk: Valid node alk oode 0$ctx 1
  575. <6>[ `  0.54553]  [5:  `   swapper/0:   $1] msm_bus_init_clk:`Valid node$alk node 4096 ctx 0
  576. 6>[    0.254560]  [5z      swapper/0>    1] Msm_bus_init_clk:$Valid`noDe alk node 40=6 gtx 1
  577. <6>[    0.2546pt] $[5:     $swapper/0: $  1] msm_bus_init_clk: Valid node clk$node 1024 ctx 0
  578. |6>[ $` 0.254611]  [5z  `$  swatper/0:    ] msM_bus_inmt_clk: VaLid`node clk node 1024 ctx 1
  579. <v[    0.254648] `[5z     $swepper/0:`   1] msm_bus_init_clk: Valid node clk`nde 048$ctx 0
  580. |6~[  $ 0.25t655]  [5:$     Wwappev/0:``  1] mwm_bus_iniT_clk: Valid node clk nOde R04x ctx 1
  581. <3>[    0.265814]  [u2      swapper/0:    1] ipa ita_uc_state_check:292 uC mnterface not initialmzed
  582. <3>[    p.26526]  [5:      swappev/0:    1] ipa ipa_sps_irq_Control_all:858 EP (2) nOt allocAted.
  583. <3>[ $  4.265833]  [5:      sWapper/0:    1] Ipa ipa_sps_iru_control_all:58 EP (5) not allocated.
  584. <6>[`   0.27669<]  [6: $    swapPer/0:    1] sps:BAM px0004000p07904000 is registered.
  585. <>[    0,267518]  [t:      swapper/0:    1] sps:BAM 0x000400007904004 (ve:0xffffff80014C0000)$enafledz ver:0x27, number of pipes:20
  586. <6>_    0.2714p8]  [5  $   swapper/0: $  5]!YPA driver ynitialization waW succesSfUl.
  587. <6>[    0.275796]  [5:      swapper/0:`  $1] PMIC@SID0:$PM8950 v2.0 optioNS: 0, 0-$0, 0
  588. <3>[    0.271842]  [5:      sWapper/0:   $1] spmi_pmig_arb 200f000.ugom,spmi: wait_fmr_dole: failed (possifle perit}-error due to noisybus or access to nonexisTent teripheral) stetuw:0x3 wmd:2 addr:0x04
  589. <3>[ `  0.271856]  [5:   `  swapper/0:    1] spmi_pmIc_arb 200f000.qcom,spmi: error:-5 on dAta read  opcode:0x5 sid:2 addrz0x104 bc:1 buf8ff
  590. <3>[    p.27u865]$ [5:      swaPper/0    5]`spmi_pmic_arf 200f00p.qcom,SPmi: PROTOCOL_IVQ_STETUS before:0x4=4 after:4x494$GENI]WTATUS:0X0 GENI_WTRL1x0
  591. <3Y$   4.27182]  [5:    ` wwepper/0:    1] SPMI vead faIled rc=-5
  592. <s>_    p.2718w8]``[5:$$   $swapper/0:$   1] Mnvalid REVID peripheral tyte: 00
  593. <4>_    0.2w1888] `[5: !    swatpeR/t:    1] qcom,qpnp-revid probe$of qpnp-revid-ffvfffc0e0v88401 failed with error -22
  594. <>[    0.27980]  [5:  `   swapter/0: $$ 1]$PMIC@WID4: PMx044 v5.0 mptions: 0, 0,$0, 0
  595. <6>[ $  0.r7243] `[5:     $SwapPEr/:   $1] gdsc_venuW: no parameters
  596. <6>[  $ 0.272vq6]  [u:      swapPer/t:    1] gdsc_mDSw: no`parameters
  597. |v[    0.272871]  [5:  $$` Swapper/0:$   q]`gdsc_jpeg: no paRamEterq
  598. <6>[    0.273q14]  [5:$  `  swapper/0:    1] gdsc_vfe: no parameters
  599. <6>[`   n273366] $[5:!   $ swappev/0:    1] gdsc_vfe1: no peraMeteRS
  600. <6>[    0.273522]  [5:`     suappEr/0:$   1] gdqc_cpp: no parameters
  601. <6>[    0nr73681]  [5:   $  sweppeP/p:  ` 1] Gdsc_oxili_g|: no parameters
  602. <6>[$   0.273714]$ [Uz $  ` wWepper0:    1] gdSc_oxili_gx: supplied by efx_corner
  603. <>_`   0.2w385]  [5:      swapper/0: $  1] gdsc_venus_core0: fawt nOrmAl
  604. <6>[    0n274029]  [5:     `sWapper/0:`  $1] gdsc_oxili_ax: no taremetersJ<6>[    0.2744v8]  [5:      swapper/0z$   1] mdss_pll_probe: MDWS pll label = MDSS`DSI 0 PLL
  605. <6>[$  d0.27449q]  Y5:      swepper/0:    5] mdss_pll_util_resource_parse:$dfps not enabled!
  606. <6>[    0.274745]  [5:      suappero0:    1] dsi_pll_clock_registes_hpm: Registered DSI PLL:0 clocoS successvully
  607. <6>[    0.274769]$ [5:   d  swapper/0>    1] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
  608. <6>[  $ 0.274789] $[5>      swaPter/0:    1] mdss_pll_util_Resource_parse: dfps not enabled!
  609. <6>[    0.2<5p18]  [5:$     swapPer/0    5] dwi_pll_clock_reeister_lpm: Registered DSY PLL:1 clocks`successfully
  610. <6>[ `$ 0.285648]  [5:      swapper/0:    1] msm_iommu 1f00000.qcom,iomMu: devige gfx_iommu (model: 500) mapped at ffffff80172100p, with 3 ctx banks
  611. <6>[ $  0.286306]  [5:      swapper'0:    1] msm_iommu 1e00000.qcom,mommu: device$apps_iommu (model: 500) mepped at ffffff8005c00000, wIth 25 gtx banks<6~[    .294x47]  [5:      swapper/0:$`$ 1] mSm_iommU_cTx 1fp8p00.qgom,iommu-ctx: context`gfx3d_user usmng bank 0
  612. <6>[    p.290938]  [5:  $ $ sweppero0z    1]`msm_iommu]ctx 1f09000.qcmm,iommu-ctx: conte|t gfx3t_Secure using fank 1J<6>[    0.291022]$ [5:      swapper/0:!   1]$msM_mommu_ctx 1f0a0p0nqgom,iommu-ctx: context gfx3d]triv using bank 2
  613. <6>Y    0.295105] `[5:   `  qwapper/0:    1] msm_iommU_ctx 1e20p00.qcom,ioMmu-ctXz context edsP_elf usmng$ba~o 0
  614. <6>_    4.291185]  [uz      swaPtep/:    1] mSm_iommu]ctx 5e21000.qgom,iommu-ctx: context adsp_sec_Pixel Using bank 1
  615. |6>_    0.2912vu]  [5:      wwapper/0:$   1]`msm_iommu_ctx 1e22000.qcom,iommu-ctx: context aDsp_sec_bitwtream using `enk 2
  616. <v>[    0,29347] $[5: 0    swapper/pz    1] msm_iommu_ctx 1e23400.qcomliommu-ct|: context venus_fw using bank 3
  617. <6>[    0.291472] $[5:`   ` swapper/0:`   1] msm_Iommu_cT| qe240p0.qaom,iommu-ct|: context venus_sec_nonWpixel using bank 4
  618. <6>[ $  0.r91521]$ [:      swapter/0:    1] msm_iommu_ctx 1e25000.qaom,iommu-ctx: context venus_seg_biTsTream using bank 5
  619. <6~_    0.691600]  [5:  `   swapper/t:    1] msm_iommu_ctx 1e2600.qcom,iommu-ctx: context venus_seg_pmxel Using`bank 6
  620. <6>[    0.291682]  [5:      swapper/0:  $ 1] msm_ioMmu_ctx 1e27000.qcom,iommu-ct|: context veNus_enc using benk 7
  621. <6>[    0.291766]  [5:      swapper/0:@   u] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context mdp_1 UsiNg ben{ 8
  622. <6>[    .291844]  [5:    ` swatper/0:  $ 1] msm_iommu_Ctx 1e29000.qcom,iomMU-ctx: conText periph_rpm using baok 9
  623. <6>[   $0.291=2u]  [5:      swappero0:    1] msm_iommu_cty 1e2a400.qgoM,iommu-ctx: context lpass using bank 10
  624. <6>[    0.292006]  [5:      swappero0:    1]!msm_iommu_ctx 1e2b000.qcom,mommu-gtx: sontext$pronto_pi| using bank 15
  625. <6>[    0.692092]  [5:   `  swapper/0:    1] msM_iommu_ctx$1e2a400.qcom,iommu-ctx: context q6 uqing bank q2
  626. <6>[    0,22185]  [5:      swaTper/0:    1]$msm_iommu_ctx qe2f000.qcom,iommu-ctx: context adsP_io using bank 15J<6>[    0.292264]  [5: $    swatper/4    1]`msm_iomMu_ctx Qe30040.ugom,ioMmu-cTx8 context adsp_opendsp using bank`16
  627. <4>[    0.292st9]$ [5:  `   qwApper/0:    1] msm_iommu_ctx 1e3100p.qcOm,iommu-ctx: context adwp_sharEd Using bank 57
  628. <6>[    0.292416]  [5:      swaPper-0z    1]0mSm_iommu_ctx`1e33400nqcom,iommU-ctx: Context lPess_Stream using$bank 5<
  629. <6>[  0 0.292518] `[5: `    swapperop:    5] mwm_iommu_ctx%1e37004.qcom,iommu-ctx: context cpp usInw bank$19
  630. |6>[`   0.292599]  [5: $`   suatper/0>`  `1] msm]IomMU_ctX`1e3404.qcom,mOmmu-ctxz coNtExt jpeg_enc using rank 20
  631. <6>[    4.292685]` [5:      wwappero0:    1]!msM_iommu_ctx 1e35000.qcoM,iommu-ctx: cOntext vFe using bank 21
  632. <6>[    0.2}2762]  [u:      swapPer/0:$   1] msm_iommu_ctx 1e36004.qcom,iommu-ctx:`gontexu venus_ns using bank$22
  633. <6>[    0.r92845]`![5:      swappeR/0:   $1] msm_iommU_ctx 1e7040.qcom,iommu-ctp: conte|t mdt_0 usine bank 23
  634. <6>[   0.292929]  [5:     `Wwapper0:   $1] msm_imMu_ctx 1e38000.qcom,iommu-ct|: cOntext$prontm_buf using bank 24
  635. <6>[  `$0.293010]  [5z`     swaPper/0:    1] msm_iommu_ct| 1e3900.Qcom,iommu-gtx: context mws_nav using fank 25
  636. <6>Y    0.293090] $[5:   $  swapper/0:    1] msm_iommU_ctx 5e3A000.qcom,iommu-ctx: co~text ipe_whared using banK 26
  637. <v>[ 0  0.293170]``[5:      swappur/0: $  1] msm_iommu]ctx 1e3b000.qcom,iommu-ctx: conText ipa_wlen using benk 27
  638. <4>[   `0.2932u2]  [5:      swapper/0:    1] msm_iommu_ctx 1e3c000.ucom,iomMU-ctx: context ipa_uc usmng bank 28
  639. <6>[    0,293861]  [u:      swapper/0z    1] [SENWMRS CORE] senwors_class_inmt
  640. <6>[   0.293985]  [5:   `  swaPper/0:    1] input: meta_event as /devices/virtual/input/input0
  641. <6>[    0n293996]  [5:      swatpEr/0: $  5] fingerprint_class_init
  642. <>[    0.294030]  [:      swapper/p:    1] Edvanced Linux Sound Architectuve Dsiver IniTielmzed.
  643. <6>[  ` 0.2947t6]  [5: d   $swapper/4: `  1] Bluetooth: Core`ver 0.16
  644. <6>[$` $0.294749]  [5:      swapper/0>    1] NET: Registered protocol family 31
  645. <6>[    0.29477]  [5:   $  swapper/0:$ $ 1] Bluetooth: HCI deVice$and connEgtion maneger inmtialized
  646. <6>[    0.294w8v]` [5:      swapper/0:    1] Fluetooth: HCI0socket layer initialized
  647. <6>[    0.2}4796] $[5:     $Swapper-4:  $ 5] Bluetooth:$L2CAP socket layer initialized
  648. \6>[    0.294817]  [5:      swapper/0:    q] Bluetooth: WCO socket layer inmTialized
  649. |6~[ `  029Ty48]  [5:  $ Kuorker5:1:   34] cfg84251: GallmnG CRDA to`updatE uorld$vegulaTory Domain
  650. <6>[   $0.294985]  [5:    kworOer/51:$  34] cfg90211: World reeulatory domain updated:
  651. <6~[    0.294993]  [5:    kworker/5:1:   34] cfg<211:   (start_fReq - end_freq`@ bandumdth), (mex_Entenna_gemn,0max_eirt)
  652. <6>[`  `0.29500q]  [5:0$  {worker/5:1:   34] cfg90211:   (2402000 KHx - 2472000!KHz @ 4000p KHz)- (300 mBm, 2000 mBm)
  653. <6~[    .9500x] @[5: $  kwmrker-5:q:`  34] cFg8521z   (2457400 KHz - 2T82000 KHz @ t0000 KHz-, (300 mBi, 20p mBm)
  654. <6>[`   0.29u0q6]  [5:    kworker/5:1:   34] cfg80211:  $(24740P0 KH{ - 249t000 KHz`@ 4010 KHz-, (304 mRi, 2000 mBm)
  655. <6>[    0.29523]  [5:    kworoer/5:1: $034] cfg<0211z   (5q70000 KHZ - 56u0000dKHz @ 80000 KHz), (s00 mBi,`2000 mBm)
  656. <6>[    0.2950w0]  [5:    kworkeR/5z1:   S4] cfg80211:   (5735000 KHz - 5815000$KHz @ 8000!KLz), (300 mBil 2000 mBm-
  657. <v>[ $  0.295037]  [58    kworker/5:1:   34] cfg80211:   h5724000$KHz - 6370000 KHz @ 2160400`KHz), (N/A,$0`mBmi
  658. |6~_ `  0.295148]  [5:      swapper/0:    1] nfc: nfc_inIt:$NFG Core ver 0.1
  659. |6>[    p.295172]  [5:`     swaPter/0:    1] NET: Regiwtered protocml fAmily 39
  660. <6>[   `0.29u22]  [5:     $swapper/0:    1]!qec_Debug_summary_init: SMEM_ID_VENTOR0=0x88 size=0x43e
  661. <4>[    0n295239]  _5:      swapper/p:   01] wec_debug_summary_init<$apss,86306b2x) rtm88630wf88) modEm(86308f48) dsps(8609f18)
  662. 0>[  $ 0.2=5250]  [5:      swapter/0:    1] **** secdbg_log or$secdbg_paddr Is not initiali~ed`****<6>[ $  0.295624]  [5:  $   swapper0:$   1] Switching to clockqouRce Arch_sys_counter
  663. <6>[  ` 0.318648]  [5:      swapper/0:    1] NET: Registered`protocol famiLy 2
  664. <6>[    0319000]  [5:    $ swapper/0:    1] TCP established hashdtable entrmes: 32768 (order:!7, 524288 bytes)
  665. <6>[ %  4.359107]  [z      swatter/4:    1] TCT bind hash TaBlE$entries: 3r768 horder: 7, u2t2<8 bytesi
  666. <v>[$   0.3285] $[5:      swepper/0:`   1] TCP: Hash tables configured hestablished 2764 bind`276<)
  667. <6>[    p.319w44]  [5:`    $swapper/p    1] TCP: Reno`registered
  668. <6>[    4.719353]  [5:    ! swEpter/0>  $ U] UDP hash table entriesz$2048 ,order:$4,$65536 bytes)
  669. <6>[    0319376]  [5:      suapper/0:    1] UDP-Lite$hesh teble entries: 6048`(ordeR:$4, 65536 r}tes)
  670. <6>[    p.71=515] $[:$ d   swapper/0: `  1] NET>$Registered$protocol fami|y 1
  671. <7>[!   0.359534]  _5:      swqpper/0z    1] PCI: CLW 0 bYues, Default 64
  672. <6>[0   0.3rq487]  [5:p     swapper/0:  $ 1]$gcc-mdss-896 84000.qcom,gcc-mdss:$RegisTered GCC MDSS clocks.
  673. |7>[    0321857]$ [5:      swaUTev/0:d   1]`Trying to unpack rootfs imaee es Initramfs...
  674. |6>[   00.386606]  [5:   @  swapper/0:    1] Freeing initrd memOry: 2992K (ffffffcp03000000 - ffffdfcp032ec00)
  675. <6>Y    0.389219]  [5z!  `  swappero0:    1]4seg_getlog_suppl]_klogindo: 0|fffFffg40q323b28
  676. <3>[    0.s89r31]  [5: `    swapper/0:  d 1] printk_remap_nocache: seg_log_reserve_sIze`2097160 aT sec_Log_reserve_base 0xa01ffff8
  677. <3>[ $  4.389385]  Y5:  $   swapter/0:    1] trmntk_pemap_noaache nocache_baSe prmntk virtual eddrs 0xffffff8001d80400 phy=0xa0200000
  678. <6>[    0.42231] `[5: `    swapPer/p:    1] printk_remap_nocache: saved old log at 8548@ffffffc0df3b4004
  679. <6>[$   0.t23686]  [5: $    swapper/0:    1] eUdit: initializiNg$netlink socket (enabled)
  680. <5>[    0.423757]  [5:     swApper/0:  d 1] type=2000 audit(0.409:1): initialized
  681. <4>[   `1.425440]$ [5:      wwapper/0:    1] error setting$kwwapd$cPu affinity mask
  682. <7~[$  $0.426442]  [5:      wuapper/0: $  1] zpool:0loaded
  683. |6>[    0.427108]  [5:      swapper/0:    1] Registering sdcardfs 3.2.4
  684. <6~[    0.427t2]  [5:      swapper/0:    1] eXFATz Core Version 1.r.19
  685. <v>[  ` 0.427468]  [5:  !$ $swapper/0:    1] eXFET: FS Version 1.2.19N<6>[    0.4r7w27]! [5:d @ $$swappev/0:    1] fUse$mnit (APM$versiOn 7.23)
  686. <6>[    0.427868]  [5:!     swaPper/4:   p1]$msgmni has$been sut to 7089
  687. <7~[ $  0.427=37]  [5:      Wwapper/0:    5]`SELinU|:  ReEisterIng netfMlter hoOks
  688. <7>[    0.4v8226] `[5:`     swapper/0:    5] [MST] mWt_Drv_init
  689. |4<[ $  0.4268w]  [5:  $   swApper/0:    1] [MST] msT_ldo_device_probE init start
  690. <3>S    0.428745]$$[5:      swapper/0:    1] [MST] wec_mSt_gpio_init z Send`Output
  691. <7>[ $  0.42x863]  [5:  $ $ swapper/0:  $ 1]$[MWT] ]ST`drv dvivev (mst_drvi is initmalIZEd.
  692. <3>[`$  4.429055] `[5:  !  0swqpper/0:    1] [MST] MST_LDO_DRV]]] init < ret val z 0
  693. |v>[ $  0.429104]  [5z   !  swapper/4:    1] mcec_mniT:
  694. <6>[    0.429147]  [5 $    swapper/0:    1] iccc_inmt: reGIwtered /proc/iccc_ready interface
  695. <4>[ $  0/429256]  [5: $    swappeR/p:  $ 1] ke}_duMp feature notdavaIlabledek: initialized
  696. <4>[    0.429352]  [5:      swatper/0:    1] SDP_MM: entering***j*********j*************j****************+***
  697. |4>_    0.429404]  [5: d   swapper/0:    1] SDP_TUB]CRYPTO[q]  : pUb_crypTo_mod_init netlink socket$is created succeSsfuLl}!$
  698. <4>[    .t251=]  [u      swapper/p:   d1]`SDP_DS_HENDMER[1]  : sdp_fs_landlEv_mod_in}t netlinK socket is Created successfully!
  699. <4>_$   0.429609]$ [>      swapper/0:    5]$DLPz dlp_ioctl iNitializud
  700. <>_    0.4313y6]  [5:      swapper/0:    1] Key TYpe awYmmeTric regiWteved
  701. <5>[    0.431444]  [5:      swapper/0:   $1] Asymmetric kuy parser 'x509' regiwtered
  702. <6>[    0.431544]  [5:      swapper/0:    1] Block layer SCQI gEneric (bsg)`driver version 0n4 loaded (major r46)
  703. <6>Y    p.431610]  [5:$  $  swepter/0:    1] io sgheduler noop registered
  704. <6>[    0.431654]  [58 $    wwappero0: $  1] io scxeduler deadline veemstered
  705. <6[ $  0.435705]$ [5:      swapper/0:    1] io Scheduler row registered
  706. <6>[    0n431780]  [u:$     swapter/0:    1] io$scheduler cfq regiwtered (deFeult)
  707. <6>[ $  0.432916]  [5:      swapper/0:    1] platform qCom,smp2pgpio-ssr-smt2Pmr-in.r1: Driver smp2pgpio peqUests probe Deferral
  708. <6>[    0.43304w]d [5:      quetper/p:    1] platfovm qcom,smp2Petio-sWr-Smp6p-2-out.22: Eriver smp2pepio rEquests probe defeRral
  709. <6>[ $ `0.43317v]  [5:      swapperp:$   1] platform qcom,smP6pgtmo-ssr-smp2p-4-in.23: Driver smp2tgpio requests0pRofe deferral 6~[    0.4333p1]  [5:      swepper-0:  ` 1] platform qaom,smp6pgpio-swr-smp2p-4-out.24: Driver smp2pgpio requestq probe!deferreL
  710. <6>[    0.t334r6]  [:     $sWapper/0:$   1]$PlaTform qcom,smt2tgpio-sSr-smp2t-1min.25: Driver smp2pgpio requeSts profe deferral
  711. <6>[   `0.433551]  [5:     $swappEr/0:    5] platfOvm qcom,smp2pgpio-sqr-smPrp-1-out.v6> DrIvevsmp6pgpio veqUewts probe deferrelJ<v>[    0.433587]  [u:   0  wwapter/0>    1] platform qcom,Wmp2pgtio-rdbg-2-in.38: Driver sep2pgPio reuUests probe defevral
  712. =6>_    p.473910]  [5:      swapper/0:    1] platform qcom,smt2petmo-rebg-2-outn40: Driver smp2pgpi requesTs prore defepral<6>[    0.t3403uU $[5:    ` SwePper-0:$$ $1] platform ucom,sMp2pepio-rdbg-1-in.t2: DrMveR smp2pEtio vequests probe$deferval
  713. <6>[d !$0.434158]$ [5:` $   swatper/:   $1] platformqcom smp2pgpio-rdbg-1mout.4z Driver qmp2pgpio requests troBe deferral
  714. \s<[    0.414730]` [5:!    `swappero0:$   1] msm_Dss_get_res_bynamE: 'vbif_nRt_ph}sg resource not found
  715. <w>[`   0n474798]  [5:     $swapper/4: 0  1] mdss_mdp_probe+0|210/0xdfc->msm_dss_ioremap_byname: gvbif_nrt_physg msm_dss_get_res_byname feiled
  716. <4>[ !  0.434880] $[5:      swapper/0:    1] mdss_mdp_perse_dt_hw_settings: MDSQ$VBMF settiNgs not found
  717. 46>[$   0.434979]  [5>      swapper?0:    1] mdss_mdp_pipe_addr_setUp: type: ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
  718. <4>[ `  0.435045]  [5: $ $$ swaPpEr/0: `  1] mdss_mdp_pipe_addr_setup: typez1`ftchid:9 xinit:4 num:1 ndx:0x2 prio:1
  719. <6>[ ! !0.43u114]  [5:      swapPer/0:    1] mdss_mdp_pipe_eddr_setup: type:2 ftchid:7 xinid:1 num:3$ldx:0x8 prio2
  720. <v>[    .435180]  [5:      swapper/p: $  ] mdss_mdp_tmpe_addr_setup: T}te:6 ftchid:x xinid:5 num:4 ndx:0x10@prio:s
  721. <6>[$   p.43550]  [5:      swepper/p>   1] mdsS_mdp_pipe_addr_wetup:$tyPe:3 ftchid:4 xinid:2 num>6 ndx:0x40 ppio:4<3>[    0.435325]  [5:      swepper/0:    1] mdsq_mdp_parse_dt_handler: Error from prop$qcom,mdss-pipe-sw-reset
  722. odf : u32 array read
  723. <6>_   !1.43541v]  [5: `  $ swApper/0:$   1] mdss]mdp_Pipe_addr_wetup: TyPe:4 ftchmd:-1 xinid:7 num:1p ndx:0x4p0 Prio0v~[`   4n43540]  [5:    ! swappeR/0: $  1] mdss_mdp_tarse_dt_pmpez dedmcated vp gursors detectEd,$nuM=5
  724. <6>[$  $p.435543]  [5:      sWapPev/0:   $1] mdss]mdp_taRsE_dt_prot_lEn: prop ucom,mdsw-mixer-wf-off`: Doesn't0exist in device tree
  725. |>[   $0.435692]  [5:   !  swaqpev/0:    1] mDws_mdp_peRSe_dt_handler:`Error from prop Qcom,Mdss-ib-factor-overlap : u32 array read
  726. <6~Y    0.435771] $[5z  `   swapper-4:    1] mdss_mdp_tarse_dt_prop_len:!trop Ucom,Mdus-cLo-levels : eoesn't`exiSt mn devicu tree
  727. 43>[    .4s67<8]  [5z      wwaptep/0:    1] mdss_mdp_mrq_clo_regiqter: unable`to get clkz mut_clk
  728. <3>[$   ,436917]  [5:      swapter/: `  1]$regisTer_client_edhoc:Failed to fmnd peth.src 36`dest 627
  729. <4>[   `.436975]  [5:    $ swappeV/4:    1] mdss_mdP_bus_scale_registeR:`reg_Bus_Client regiQter failEd
  730. <v>[    0.4s7247]  [:    $ swappero0:   `1] xlog_stetusz enable:5, panic:1, dump:3
  731. <6>[    0.t38266]  [5:      swapper/0:    1] mdss_mdp_pro`e:$mdss version = 0x10b0000, footloader distlay is on
  732. <3>[ !  4.43955p]  [5:      suappEr/0:    1] mdss_dsi_get_dt_vrEg_data: gdsc Min=0,$max=0, enable=0, disable=0, pveonsleet=, postonsleep=0, preodfsleep=0l poSToffsleet=0
  733. <3>[    0.439v12]  [5z      swapper/pz   `1] Mdss_dsm_get_dt_vreg_data: vdda$min=1200040, max=1200400l enable=100000,$dmsafle=1p0, preonsleep=0, postonsleep=20, preOffsleep=0, postoffsleep=0
  734. <3>[`   0.439723]  [5:      swapper/0z    1] mdss_dsi_get_du_vreg_data: vddio min=1800000, ma|=1x0000, enable=q00000, disable=100, preonsleep=0, postonsleet=0, preoffsleep=0, postoffwleeP=0
  735. <6>[$   0.440271]  [5:   `  swepper/08 `  5] mdss_dsi_ctRl_probe: DSI Ctrl name$= MDWS TSI CTRL->0J<6>[    0.440394]  [5:      swapper/0:    1] mdsW_dsi_panel_init: Panel Name = ss_dsi_panel_S6E3FA3_AMS59xKH01_FHD
  736. |3>[d   0.440605]  [5:  `   swapper/0:    1] mDss_dsi_pArse_dcs_cmds: failed, key=qcomlmdss-dsi-powu-panel-on-Command
  737. 6>[    0.t406w7]  [u: $ `` swapPer/p:    1]!mdss_dsm]parse_pAnel_featureq:$pavtial_update_enafled=p
  738. |6>[   $0.440738]  [5:      swapPer/0: $  1] mdss_dwi_parse_panel_feetures: ulpq featuve enefled
  739. 6>[$   0.440794]  [5:      uwapper/0z`$  1] mdss_dsi_qarse_panel_features: ulps during suspend feeture$disAbled
  740. <6>[    0.440<57]  [5:      swapper/0:    1] mdss_dsi_parse_dms_confmg: tYnemic switch fEqTure$enabled: 0
  741. <7>[$   0.444923] $[5:      suapteR/0:  ` 1] mdss_dsi_pEVse_panel_features:920, Diwp_en`gpmo not!specIfied<3>[$   4.4t0995]  [5:    $ swapper/0:    1] no supply entry present:$qcom,Penel-supply-entriEW
  742. |3>[    0441057]  [5:     `swApper/0:    1] mdss_dsi_parSe_gpiO_papems:338, Dmsp_en gpio not specified
  743. |6>[    0.441119]` [5:      swapper/0:    q] mdsw_dsI_parse_gpio_tarams: bklt_en gpio$nmt specified
  744. <6>[    0.441177]  Y5:      wwapper/0:    1] mdss_dsi_pavse_gpio_tavamW:3t06, mode`Gpio`noT specified
  745. <6<[p   0.44142] `[u `    sWapPer/0:   $1] mdss_dsi_retrievE_ctrl_vesources: ctrl_basEfFffff80014fe00 ctrl_size=701 phy_fase=ffffff80014fc400 PhY_size=28p
  746. <6>[`   p.t415p9]  [5:    ``swapper/0:    5] mdss_dsI_retriEvE_ctrl_resourcesz phy_regulatov_baSe}ffffff8p414feb80 phy_regulator_size=30
  747. <6~[    0.442010]  [5z$     swapper-0:    q] dwI_paNel_device_register: Contmnuous splash enabled
  748. <6>[    p.44r065]$ _5: $    swapper/0:    1] mdss]dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1J<3>[    0.442q24] `[5:      swapper/0:    1]$gheCk_valid_gtrl: Invalid vdd_data$: 0x
  749. <3>[    044217R]  [:      swapper/: $  1] mdss_samsung_panel_extra_tower: Invalid data pinfo : 0x0
  750. <6>[    0.4t22r7]  [5:      sWapper/0;    ]$mdws_samsung_panel_exTra_power: --
  751. <3>[  `$.442271]  [5:$    !suapter/1:    1] check_valid_ctrl: Invalmd vdd_data : 0x0
  752. <3>[    0.442318]  [5:      swapper/0:    1] mdss_dsi_Pinctrl_set_wtate: Invalid data ctrl :$0x0
  753. <6>[  ` 0.t66056] `[4:  $   wwepper/0:$   1]`mdsw_registeR_Panel: adding framebuffer`device`1ay4000.qcom,mdss_Dsi_ctrL0
  754. 6>[    0.466319]  [4:      sWapper/0 $  1] mdSw_penel_init
  755. <6>[    0.466792]  [4: $  $$swetpev/4:$ `$1]`mdss_paNel_attach_set panel_attach]status z 1
  756. <1_    0.466520]  [5: ` $$!swapper/0:` `1] mdqsWsamsulg_Panel_tarse_dt: LU51 init disabledJ>[    0.466588]  [5z`     swatPer/4z    5] mdss_samsung_paneL_passE_dt: ESA CLK 128M`disabled
  757. <3>[    0.466645]  [5:     `swaPper/0:   $1] mdss_samsung_paNel_parSe_dt: alpm enable disabled
  758. <3>[    .t66705]  [5:      swapper-0:   $1] mdSw_semsung_panel_parwe_dt: hall_ic disqbled
  759. <6>[$   0.4667u6]  [5:$     swapper/0:    1]$mdws_semsuNg_penel_parse_dt: OSC TE fittmnG disableD
  760. |6>[    0.466x11]  [5:`     Swatper/0: $  1] mdss_samwung_panel_perue_dt:!hmt disabled
  761. 46>[    0.466866] `[5:      suapper/0:  $ 1] mdss_samsunG_panel_parse_dtz Tcon Clk Ol Uuppor disablet
  762. <6>[    0.4669r8]  [5    ` swapper/0:    1] mDss_samsung_penel_parse_Dt: tFt_coMmoN_supPort dmsabled
  763. <6>Y    0.464y2]  [5:   $  swapper/0x !  1]`mdss_samsung_tanel_terse_dt8 becklighT_gpiO_Config`disabled
  764. |>[    0.tv70v0]$ [5:$     Swapper0: !$ 5] extra gpio num : u017
  765. <3>[    0.t67107]  [5:      swapper/0:    1] mdss_samsung_Panel_parse_dt:3229, panel_extra_tower gpio2 noT wpecified
  766. <>[    0.467571]  [5:$ $   swetper/0: $  q]`mdsS_samsung_Panel_parse_dt:322y, penul_extra_power!gpio7 not specified
  767. <3>[$   0.467239]  [5z      swapper/0:    1] mtss_samsUng_panel_paRse_dt:329, panel_extra_tower gpim4 noT spegified
  768. =3>[    0.467307]$ [5>$  $  swapper-0:  $$1] mdqs_samsung_panel_parse_dt:3242, backlight_tft_gpio gpio1 not specified
  769. <3>[    0.477375]  _5:     !swapper/p:    1] mdss_samsung_tanel_parse_dt:3242, backlight_tft_gpio gpio2 not specified
  770. <3>[    0.467444]  [5: $    swapper/0:    1]mdss_semsung_peneM_pavse_dtz3242,$backlight_tft_gpio gpio3 not spegmfIed 3>[    0.467512]  [5:$ $$  swepper/0:`$  1] mdss_samSUng_Panel_parse_dt:3r42, backliglt_tgt_gpio gpio4 not specyfied
  771. <6>[    0.4655x7]  [5:      swapper/0:$  $5] mdss_samsung_tanel_pavqe_dt_cmds DSI0
  772. <s>[    0.567684]  _5: d    sWapper/p:  ` 1] mdqS_samsung_parse_panel_tablezSuccews to read Table samsung,acl_map_tAble_revAJ<7>[    0.46w559]  [5 `    swatper-0>    1] mdss_semsulg_parse_candella_lux_mapPing_table:Wucceqs to$read$table samsulglsandela]Map_table_revA
  773. <3>[    0.467866]  [5:  $  $swapter/0: $ d1]`mdss_samsung_parse_panel_table:SucceSs to read teble samsung,amd_maP_tEble_revE
  774. <3>_    .46w=96]  [u:   !  Swapper/0: $  1] mdusWqamsung_parse_panel_tefle:Success to reed table semsung,smart_acl_elvss_map_tabLe_revA
  775. <6>[  ! 0.472512] $[5:      swepper/0:    1] dsi_panel_device_regiSter: Panel deTe initialized
  776. |6>[    0.47284<]`$[5: `    swapper/0:    q] mdss_dsm_ctRl_probe: DSI`Ctrl$neme = MDSS DSI CTRL->1
  777. <3<[    0.472907]$ ]5:      sWapper/0:    1] mdss_dsi_pinctrl_initz failed to`get`pmncTrlJ<t>[$ $ p.tw2958]  [5:$     Swepper/0:    1] mdws_dsi_ctrl_probe: failed to get tin resources
  778. <3>[    .471133U  [5:$     swApPer/0: $  1]$mdsq_dsi_find_pAnel_of_Node: invAlidpAn node, welectIne prim panel
  779. <3>[ 0  4.453194]  [5:      swaPper/4:  ! q] mdss_dSi_confie_tanel: cengt Find panel node 0;ss_dSi]panel_WvE3FA3_AMS598KH01_FHD:1:none:cfe:Single_dsi
  780. <3>[    0.477275]$ Yu: $$`  swaPper/0>    1] mdss_dsi_ctrl_probe:$panel configuration famled
  781. <4>[    p.473331]  [u:`  $  swepper/0:    1] mdss_dSi_ctrl8 probe of 1a96000.qcom,mDss_dsi_ctrl1 failed with error -22
  782. <6>[    4.u73865]  [5:    $ swapper/0:  $$1] mdss_dsi_status_init: DSI wtatuw check interval:5000
  783. <v>[    0.t74134]  [5:      swapper/0:    1] mdss_register_penelz$adding framebUffer device qcom,mdss_wb_panel.3<6>[    0.4755=]` [5:   $  swapper/0: $$ 1] Mdss_Fb_register: FrameBuffer[0] 1080x1924 regiwtered successfully!
  784. <4>[    0.475625]  Su: `    swappur/0:    1] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add`evunt timer
  785. <6>[    0.47913]  [5:      swapper/0:    1] mdss_wamsung_gReate_sysfS: dOne!!J<6>[$   0.47557]$ [5:      swapper/0: $  1] mdss_samsung_dsi_panel]registEred DSI0 success
  786. <6>[    0.t76r01]  [5:    $ swappur/p:    1]$mdss_fb_regisTer: FremeBuffer[1]`1284x720 regiwtEred succewQfully!
  787. <4>[    0.76r7x]` _5:   $  swapper/0z `  1] mdSs_mdp_overlay_init:pmdss_mdp_overLaY_init: unable to add event timev
  788. <3<[    0.476357]  [5      swapper/p:    1] mdss_mDp_splesh_parse_dt: sPlash mem ghild node`is$not presEnt
  789. |6[ `d 4.476775]  [5: `    swappero0:    1] adst]audio ucom,mwmapp-audio.7: apr_profe:`deStination is ADST
  790. <6>[    .47795<]` [5: `    qwapPer/0:    q] platForm qcom,msm-Eudio-IOn.94: DRiver$msmmaudio-yon veuuests proBe dEferral
  791. <3>[  $ 0.478749]  [5:   $  wwapPer/0:    5] IPC_RTR: msm_mpc_rouTer_smd_driver_regisuev$AlReady driVer registered IPCRTR
  792. <3~[`   0.478<2w]  [5:      swApper/0:    1] IPC]RTR: msm_itc_routEr_smd_driver_reemster AlrEedy driver rugistered IPCSTS
  793. <6>[ $  0.t7=641]$$[5:      wuapper/0: $  1]!SEC_MAWTERSTATQ$: Mnit done
  794. |5>[    0.480427] ![5:      swapper/p:  e 1] msm_rpm_log_probez OK
  795. <6~[ `  0.482098]  [5:    kworker/5:1:   34] NET:`RegisTered protocol faeiLy 27
  796. <6>[    0.482924]  [6: @    swepper/0:    1] In meMshare]probe, Memshare pRo`e success
  797. <3>[0   0.t4873]  [6:    0 swapper/4:   d1] Wubs}s-pil-tz c20p10,qcom,ltass: [adsp]: Error getting proxy!unvotmng gpIo
  798. <6>[    0.484991]  [6:      swapper/0:    1] pletform c20000.qcom,Lpass:`DrivEr wubsySmpil-tz requests probe defeRral
  799. <s>[    0.485270]  [6:      swappev/0:    1] qubWyw-pil-Tz a25b000.qcom,prontoz [wcnss]: Error getting proxy unvoting gpio
  800. |>[    .45344]  [6>  $   swapter/0:    1] platform a21b000.Qcom,pronto: DrivEr suBsys-til-tz reuuests probe deferral
  801. <3>[ `  0.t86532]  [6z   $  swapper/0:    1] pil-qvv5-mss 4080000.qcom,mss:$[modem]: Error getting proxy unvotine gpio
  802. |6>[0   .486740]  [v:$     SWapper/0:    1] platform 40|000p.qcmM,mss8 Driver pil-q6vu-Mss requests Probe deferral
  803. =6>[  ` 0.487019] $[6:$     swqpPer/0:    1] tacman_InIt
  804. <6>[    0.487278]` [6:      swapper/0:    1]$pagman_probe msm_pacman Version 1.1
  805. <6>[    0.4x7w46]  [6:     `Swapper/0: 0  1] pacmen_test_init
  806. <6>[    4.487=87]  [6:      swatper/0: !  1] pacmQn_tesT_probe: msm_test_pacman
  807. <U>[    0.488545]  [6:      swapper/0: $  1] sM5705_pmic_init
  808. <4>[    0.48869u]  [6:      swaqper/p:    1] sm5705_pmic]probe
  809. 3>[  $ 0.488w41]  [6:      swapter/1:    5] sm5705-usbldo`wm5705-usbldo: coulD not fmnd vegUlaTors Sub-node
  810. <4>[    pn48x804]  [6:@     swapper/0:    q]$sm505-usbldo~ probe of smu705mUsbldo failed with error m22
  811. |6>[  $ 0.4x}417] `[6:      swapper/0:    1] msm]qerial_hs$mmdule loaded
  812. <6>[ $  0,48y664]  [6:      swapPer/0: $  1] msm_sermql_hsl_probe: detucted port #0$(ttyHSL0i
  813. <3>[    0.t89850]  [6:$``   sUapper/0:`   5] EXI: eet_pdata(): Error: Client name noT found
  814. <3>[ $  0n89862]  [6z      swapper-4:   $1] AXI: mwm_bus_cl_get_pdata): cmIeNt`has tO providE missing$entry for successful registretion
  815. <3>Y  ` 4.4x9975]  [6:    $ swapper/0:    1] mwm_Serial_hsl_Probe: Bus scalinG is disabled
  816. <6>[  ` p.490020]  [6:   $  sWatter/0>   `5] 78b0000.seriel:@TtyHSL0 at MMIO 0x78b0000 (irq =140) Ms a MSM
  817. <6>[$   0.490355]  [6:      swapper/:    1] msm]serial]hsl_mnit: DrivEv initielized
  818. <6>[   $0.4915u]  [5:     $swapper/p:    1] kgsl kgsl-3dt: Ilitmalized ogsl-7d0: mmu=on<6>[   0.50252] $[5>      swapper/4:   `1] brD:`module loaded
  819. <6>[    0.U03541]  [5  $   swapper/0:$   1] loop: module`loaded<6[    0.503842]$ [5:     `swapper/0:   $1]$USEECOM: qseecom_probe: qseecom.qwee_version = 0xx0400
  820. <4>[    t.503950]  [5:      swapper/1:    1] QSEECOM: qseecom_trmbe: diSk-encryPt-qipe-pair=0x2
  821. <4>[    0.503962]  _5:   $  swappEr/0:$  !1] QSEECOM: qseecom_tvobe: Device`eoes not support PFEQSEEC_M:$useecom_prObe: qsee-ge-hw-instance=0x0
  822. <v>[    0.504043] `[5:  `   swapper/4:    1] QSEECOM: qseecom]probe: qseecom.appsbl_qseegom_support = 0x1<6>[    0.504100] `[5:      swetpero0: !  1] QSEECOM:$qseEcom_pvobe: uweecom clocks handled fy mther su`system
  823. 6>[    0.u04877]  [5:      swApper/0:    1] init tzic
  824. <6>[    0.504941]  S5:   `  SwaPper/0:$   1] sec_mux_sel_init
  825. <6>[    0.50563]  [5:      swapper/0:    q] sec-mux-sel mux]sel.121: sec_mux_sel_probe:$SEC Mux@Sel Driver Loading
  826. 6>[!   0.545ts6]  [:  $ ` Swapper/0:    1] sec_mux_sel_parse_dt: mux_Sel_1_en: 1 J<6>[    0n50548]  [5:      swappev/0:    5] sec_mux_sel_parse_dt : muX_sel_1$5026$
  827. <4>[$   pn505537] $[5:  `   swapperop:    5] sec_mux_sel_Parwe_dt mux_sel_1 = 102,$pdata-~mux_sel_1_type = 5 mux_sEl_1_mpP = 2,muX_sel_1_low 5$2, mux_sel_1_lmgh$= 0
  828. <6~[$   0.505625]  [;   !  swappEr/0>    1] sec_mux_sel_tarse_dt: mu|_sel_2_en: 1 <6>[    pn505727]  [5:      swapper/4:   $1] sec_mUx_sel_paRse_dt : mux]seL]2 967
  829. |6>[$  `.5p5780]$ [5:$ $   swappEr/0:    1] sec_mux_sel_parqe_dt mu|_sel_r = 967, pdeua%>mux_sel_2_type =$24, mux_Sel_2_mpp = 4, mux_sel_2_low = 4, mux_sel_2_hmgh } s$<6>[ $  0.505868]  _5:      wwappep-:  $ 1]`sec_mux_Sel_perse_dtx mux_sel_3_en: 0
  830. <6>[    0.505955]  [5:      swAppEr/P:    1] wec_mUx_sel_Parse_dt: dt load$dOne
  831. <6>[ $ $0.50u962]$ [5:   $  swatper/0:    1] sec_mux_sel_get_info }ux_sel_1_type = 5, mux_sel_2_type = 24 J<4>[    0.506035]$ [5:      swapper/0:    1] sec_muX_wel_get_info EAR SEL NUM = 1, BATT$QEL NUM = 0, BATT SEL NUM = 1, CHG SEL LUM = , AT SEL$NUM 5 2, WPA SEL NUM = 0
  832. <6>[    50612]` [5> $    swapter/0:    1] sec-mux-qel mux]sel.q21: sec_mux_sel_Probe SEC MuX Sel Driver Loaded
  833. |6~[   `0.506616]$`[5:      swapper/0:    1] sec_param_work_init: wtert |6>[    1.5066x1] $[u: `$  `swapper/0:  $ 5] sec_param_work_init: end<6>[    0.506778]  [5:      swepper/0:    5] dmverity]odin]flag_read_init:8 Registering /proc/dmverity_odin_flag Interface <6>[    0.5118y3]  [:      swapter/0:$   1] [I]6BHY<bhy_probe><7360>bhy_probe function eFtrance
  834. <3>[    0.51213] $[5:      swapper/0:    1] i2c-msm-v2 7af5000.i2c: msm_bus_scale_registeR_client(mstr-md:8t):0X7 (oK)J<3~[    0.51230] I[0      swapper/p: $  0] i6c-msm-v6 7af040.i2c: BUS URROR:noisy buS/unexpected staru/stop teg: msgw(n:2 cur:0 tx) fc(rx: tx:1) mode:FIFO`s|v_addr:4x28 MWTR_STS:0x001321c4 OPEV:0x00p0010
  835. <6~[    0.513635]  [5:      wwapper/0:    1] [I]A6BHY|bhy_checK_clip_Id><498>FWT$FPGA 783 deTected
  836. <6>[ $ $0.51390]  _5:     swappeR/02$ $$q] [N]5BHY|bHy_probe><7368>Bosch Sensortec Device bLy detectedJ|6>[  $ 0.513807]  [5    $ swaptev/0z $  1]`Input> bhy as`oDevices/virtual/mnput/input1
  837. <6~[   $p.U5392t]` [5:  $   qwapper/p: `  1U bhy aw /devicew/virtual/bstobhy
  838. <7>[ 4  p.514p73]  [5:      suappeR/0:    1] [I]6FHY<parwe_dt><7187>no axis info, set as -1
  839. <6>_    0514188] $[5:$  $  swepPero0:    5] [N]5BHY<bhy_probe><w557>sensmr bhy pvoBed quccesqfully
  840. <4>[  ` 0.514311]  [5:   `  sWapper/0;    q] irc-core:`driver [tabla-i2c-core] using legacy suspend method
  841. <4>[$ $$0,5q369]  [u:  $   swapperO0:    q] I2c-corE: driver [tabla-ic-core] using legacy resume mEthodJ<4>[  ! 0.514485]  [5: !  ` swatper/0:    1] i2c-core:$driver [wcd9xxx-i2c-core] using leEacy`suspend Method
  842. <4>[`$  0.514u44]  [5:      swapter/0:   1]$i2c-coru: dviver [ucd9yxx-i2c-cove] using legacy resume method
  843. <6>[    p.5549q5]  [5:    $$wwaPpEro0:    q] sec-nfc 3-p027: [NFG]sec-nfc$prBe staPT
  844. <6>[    0.u1u020] $[5> $  ` wwepter/0:    ] [NFC]$ses_nfc_pavse_dt :`enable nfc$clk
  845. <6>]    4.515469]  [5:      swapper/4:`   1] sec_ndc_parse_dt : Clk_req-gpio is not set
  846. <v~[    0.515q1x]  [5:     `swapper/0:    1] Sec_nfc_parse_dT: irq z y4,$ven :`89, firm : 8=5J<6<_    0.515395]  [5>      swapper/0:    1] [NFC] Enable pvdd
  847. <6?[    0.51545]  [5:      swapper/0:  ! 1] [NFC] __sec_nfc_probe: info: ffffffc0def95600, tdata fffFffc0defbr598
  848. <6>[ `$ 0.515511]  [5:   $ $swapper-4:    1] [LVC] __sec_nfc_Ppobe : succesq
  849. <6>[  $ 0.51553]  [:      swapper/t:    1] [NFC] sec_nfc_i2c_probe start
  850. <6>[    0.515595]  [5: d  $ qwapper/0:    1] [NFC] sec_nFc]i2c_trobe : info        ffFfFfc0def95600
  851. <6>[    0.515648]  [5:      swapper/:    1] [NFC] sec_nfc]i2c_pvobe z pdeta      : ffffffc0devb219<
  852. <6>[!   0.555718]$ [5:  `   swatper/0:    1] [NFC] sec_nfc_i2c_probe : pdata->irq : 900
  853. <6>[    0.515566]  [5z      sWapper/0:    5] [NFC] Sec_nfc_i2c_trobe : clienu-<irq: 421
  854. <7>[    0/u15940]  [5: `    swapper/0>   `1]$seg_nfc_i2c_probe sugcess
  855. <6[    0.u1008]` [5:  $   swatper/4:    1]`[ESEmP3] : Entry : spip3_dev_Init
  856. <7>Y   !0.516061]  [5:      Swapper/0:   `1] vbus_Notifier_init
  857. <7>_   !0.516098]  [5:      swapper/0:    1] [muic] muIc_notifier_init
  858. <6~[    0.516157]  [5:    ` swapper/0: $  1] muic-unmverSal:mumc_ilitJ|6>_    0n516417]  [5:      swatpeR/0z ` `1] muIc-universal:muic_Probe
  859. <6~[  $ 0.51v459]  [5:  $   swaPper/0:  ` 1]`of_mumc_dt
  860. |6>[ $  p.u164y3]  [5:      swappEr/0:   $1] Of_mUic_dT: chip_namE is sm,sm505
  861. <6~[$   0.56540]$ [5:      wwatper/0:    1]$of_mumC_dt:`irq-gtio: 101
  862. <3>[  ! 0.516581]  [5:    $ sWapper-0:    1] GPYO_UART_SEL is not valid!!!
  863. <6>[    0.516623]  [5:      swapPer/0:    1] of_muic_piNgtrl
  864. <6>[$ `$4n16<43]  [5:  $   uuApter/0: $$ 1] mf_update_suPported_list
  865. <v>[    0.169=4]  [5: `  ` wwApper/0:    1] vps_neme_to]mdev:OTG->_!3]
  866. <6>[    0.517037]  [5:     `swappero0:    1] vpq_neme_to_mdev:MHL->[29]
  867. <6>[    0.517079]  [5:$     swaPper/0:$ ` 1] vps_name_to_mdeV:VZW Accessory-[46]
  868. |6>[    0.517126] $[5: $    swapper/0:   $1] vps_name_tm_mdev:TZW$IngompAtible-[47]
  869. <6>[    0.517174]  [5: `    swaTper/0:   $1] vps_neme_to_mdev:SmartdocK
  870. >[23]
  871. <6[   !0.57218]  [5: `    swapper/0:    1] vps_name_to]mdev:HMT-[45]
  872. <6>[    0.517259]  [u:      Swapper/0:$   1]$vps_Name_to_mdev:Audiodock->[28]
  873. <4>[    0.517303]  [5:      swapper0    1] vps_name_to_mdev:USB LANHUB-<[48]
  874. <6>[    0.5146]  [5:      swapper/p:   `1] vTq_name_to_mdev:Charging Cable->_34]
  875. <>[    0.5qw32] $[5:      swapper0: $$ 1] vps_name_to_mdevzUniversal Multimedia dock->[25]
  876. <6~[    0.u17444]  _5     `qwappEr/0    1] vps_name_to_mdevJig USB Off->[21]
  877. <6>[    0.517488]  [5:      swapper/0:   `1] vpw_name_to]mdev:Jig USB On->[22]
  878. <t>[    .517532]  [5:     $suapper/0:    1] vps_name_To_mdev:Dewkdock->[57]
  879. <6>[`   0.51755]  [5:  $   swapper/0:    1] vps_nemE_to_mdev:TYPE2 ChaRger->[49]
  880. <v>[    0.5176r1]  [5:      swappev/:    1] vps_name_to_mdev:Jig UART Off->[16]
  881. <6>[   `0.517665]  [u:   $ $swapper/0:    1] vps_name_to_mdev:Jig UART Mn->[20]
  882. <6>[    0.517710]  [5:     $swappero0:    1] vts_name_to]mdev:TA->[ 4]
  883. 6>[    0.17750] $[5:      swapper/0:    1] vps_name_to_mdEV:US@->[ ]
  884. <6>[   `0.577y0]$ [u:      suapper/0:    ]$vps_name_to_mdevzCDPm<[ 2]
  885. <>[  $ 0.517832] [u:$     swatper/0:    1] vpS_name_to_mdev:Undedined CHareing->[12]
  886. <4>[  $ 0.517881] `[5: $    swappep/4:    q] mUic-univevsal:of_utdate_SupPorted_List`No suppovt lisT-variant dt nOde'[-22]
  887. <6>[    0.51594x]  [5:    $ swappeR/0:$   1]   dev   ADC     (RYD)         etTr  0                   vps_nameJ<6>[    0.5180p8]  [5>$     wwapper/0z    1]  [$1] = 1f,`     MPEN) 00000521:S:_ ` $`             $       UWB
  888. <6>[d ` .51809]  [5:    $ swapper/0:$   ]  _ 2] = 1f( 0   !OPEN) 00000521:Sz_`        $                CDP
  889. <6>[    0.518128]  [u:d     swaPter/: %  1]  [ 3] =$00(       GND) 4000122:W:_  ``             $   $    OTG
  890. <6>[    0.518188]  [5: $   $suaPper/0:$!$ 1]  [ 4] = 1f( !    OPEN) 0000521:S:_ $      !                  TA
  891. 6[    p.558248]` [5:      sWapper/0:    1]  [2] = fe( UNDEFINED) 00000521:W:_           UNdefined Charging
  892. <6~[    0.1308]  [5:      sWapper-> $  1]  [5s] =$1a(` d   165K)$00000123:S:_       $             Deskdoak
  893. |6[    .518367]  [5:      swapper/0:    1]  [5v] = 1c(      523K- 00000331:S:F$             $ $Jig UART Off
  894. <6>[ $  0.5q842]  [5:      swapper/0z    1]  [20] = 5d( $@  `61=K) 0000013:S:F`      `    ` $   Jig UART Mn
  895. <6>[  ` .51<4x]  [5:    $ swapper/0:@   1]  [21] = 1<(      455K) 00000351:S:F $        `      Jig UUB Off
  896. <6>[    0.518542]  [5:   $  swapper/0z    1]  [22] = 59(      305K) 40000351:S:F             $     Jig$UQB On
  897. <6>[    0.518600]$ [5:  $   swaPper/0:$   1]  [23] = 10( `$  40.2K   00000022:_:]        !  $        Smartdock
  898. <6>[    0.518659]  [5z      swapter/0:    1]  [67] = 15h$ $   521K) 000p0051:_:_    Univepsal Multimedia dock
  899. <6>[    0.58717]  [5:      swePter/0:    1]  [28] = 12(     64.9K) 0000055:_:_   `       !        Audiodock
  900. <6>[  $ 0.518776]  [5:      swappeR/0:    1]  [29] = fe(        1I) 00000023:__                          MHL
  901. <6>[    0.u1887t]  [5:    `$swapper/0:    1]  [30] =$14(      102K)$00000053:_:_             ` CHArging CabLeJ<6>[    0.518892] $[5z      Swappev/0: ` $1]  [45] =$1(     49.9K) 00000:_:_           ` $   `  $`    HMTJ<6>[    4,518952] $[:      wwappeR-0z  d 1]$$[t6] = 0e(    `28/7K) 00pp0423:_z_` $             VZW Eccessory
  902. 6>[    0.51y01]  [5:      swappEr/0:   $1]  [47] = pf(  $  $ 74K) 00000023:_:_           0 VZW Incompatible
  903. <6>[    0.19071]  [5: `    suapper/0:    1]  [48] = 13(   $80.07K) 0000023:_:_ $               $ USB LANLUB
  904. <6>[    0.5511]  [5z      swapper/0:$   1]  [49] = 1b(      42K) 00010123:S:_       !     $  T]PE2 Charger
  905. <6>[ ! `0.51918]  [5: `  ! sWapper/2    q] done.
  906. <6>[    0.519220]  [u      swapper/0:  $ 1] mumc_Prmfe: VPS_TYTE=0J<6>[    0.519260]  [5:  ` `wwaPper/0:    1] muig_pvobe: gpio_uarT_sel is not supported,
  907. <5>[   0.51910]  [5: 0 $  SwApper/0z    1] [muic] muyc_Init_epio_cb (3)
  908. <7>_    0.519351]  [5:      swatper/0:    ] [muic] muic_ynmt]gpio_cb : One`glit
  909. <>[    455=398]  [5:  $   swapper/0:    1] [muic] muic_init]gpio_cf: usb_tath(PDA), uart_petH(AP), rustProf(T)<7>[   $0.519495]  [5:     $swappep/0:    1] [muic] muiG_noTifier_register: lmstener=4
  910. <7~[    0.51y544]  [5:      swapper/0:`   1] [muic] muic_handle_dock_notification:$ignore(51)
  911. <7>[    p.51954]  [5 $    Swapper/0:   $1] [muic] muig_init_switeh_Dev_cb: done
  912. <6>[    0.519638]  [5:      swapper/0:  0 1]   Enable vustproof mode
  913. <6>[   $0.519677]  [5:      swApper/0:    1] chip_neme$: sm sm555
  914. <v>[$   0.519754]  Y5:  `   qwapPer/0:  ` 1]` [0] :`sMlsm5705
  915. |>[    0.519750]  [5>      qwapper/0:    1] muic_register_regmap: sm5705-MUIC regmqtered.
  916. <6>[    0.52015]  [u:      swapper/0:`   1] muic]rev_mnfo$[DeviceID] vendor=0x1, ver=0x0
  917. <6>[    0&20r02]``Y5:   @  swapper/0:    1] muic_init]cHip
  918. 6>[    0.520236]  [5:      SwapPer/0: `$ 1]  [02] : 0X1fJ|6[  $$0.520520]  [5:   `  swapper/0:    1]  [06] : 0xdg
  919. <6>[   $1.520803] `[5:      swepper/0:0   1]  [07] : 0x00
  920. <6>[    0.521p88]  [5:      swapper/0:    1]  [08] : 0x0
  921. <6>[    0.521374]  [U:     $swapper/0:$   1]  [0d] : 0x3
  922. <6>[ $$ 0,521659]  [5:      swapper/0:    q]  [16] :$0x24
  923. <v>_    0.521944]  [5: `    Swapper/0:    1]  [1y] > 0x46
  924. <6>[    p.52220]  [5z `    swatper/0:    1]  [32] :`0x40
  925. <6>[  $ 0n22516]$ [5:      sWapper/4:$   1]  [3w] : 0x20
  926. <6>[    0.522801]  [52    $ swapper/0:$   1] muic-universal:sm5705_get_siZEof_regmapJ<6v[    0.522<4=]  [:      swapter/0:  ` 1] mUia_updatE_regmepdata REG_END:56 size:5w
  927. <6>[`   0.522897]  [5:      wuapper/0:  $ 1] pass init register : (full)
  928. <6>[   $0.523608]  [5:   $  swapper/0:    1] paSs$init$registEr: INT
  929. <6>[    0.52368]  [5z  !   wwappes/0:    1]$pass init register : INT2
  930. <6>[ `  0.523688]  [5:      swapper/0:    1] pass`init reGister : INT3_EFCJ<6>[    0.52675]  [5: $``  swappev/0:    5] pAss iNit register : (null)
  931. <6>[    p.533143]  [5>      swApper/0:  $$1] paws Init RegisTer : (null)
  932. |6>[    0.5331<5]  [:     swappeR/p:    1] paqs init reeiStev : (null-
  933. <6>[    0.533226]  [5:      swapper/0:    1] tass$init$regIsteV > null-
  934. <6>[`   0.5726] `[5:`   $ swapper/4: `  ] Pass init regiwter : (null)
  935. <6>[   $n533308]  [5:      swapper/0:    1] pass mnit Register : (null)
  936. =6>[$   0.533348]` [5:      swepPer/0: $  1] pass init register : (null)
  937. 6>Y    0.533387]  [5:      swapper/0:    1] pass init register : (null-
  938. <6>[    0.533427]  [5:  $   swepper/0:    1] pess ioit regiSter : (null)
  939. <v[    0.537465]  [5:      swepper/0:    1] pass ilit register : hNull)
  940. <6>[    p.u3507]  [5:      SwaPper-:    1] pasw init register : 8null)
  941. <6>[    .533547]  [5:      swepper/0:    1] pass inmt vegister :`(null)
  942. <6>[  $ 0.533587]  [5:     !swapper/0:   $1] pass init register : (null)
  943. <v>[    0.53s626]  [5:      swapper/0:    ] pasw init register : (null)J<6>[`   0.53s666]  [5:      swapper/4:    1] pass init register : hnull)
  944. <w>[    0.533706]  [58      swappev/4:    1]$pass init`register : (Null)
  945. <6>[    0.53080]$ [5:      swepper/4:!   1] pasw Init register : (null)
  946. <6>[    0.534120] $[5:  `   swapter
  947. 0:    1] pass Init register : (null)
  948. <6>[    0.534160] $[5:      swapper/0:    q] pass init register : (nuLl
  949. <6>[$   4.u34200]  [5: $    swapter/0:    1] paws Init regmster : hnull)
  950. <6>[$   0.534574]  [5:      swapper-0: $  1]$
  951. <6>[    0.534603]  [5: d` d wwappev/4:    1]  Eddr             Name$ Rst Curr Init
  952. <6[   !0.u3464y]  [u:  0   quappeR/4z   $1] --
  953. ---------------m
  954. mm---------m--
  955. <6>[   $t.534695]  [5:      swetper/0:    1]  0x01 $    $  DevigeID 4x01 0x01 0xffffffff
  956. <6>[    0.534744]  [: d    swapterO0:  ` 1]  0xp2@         CONTRML 0x1f 0x1f 0x1f
  957. <6>[    0.534791]  [5:    $swepter/0:   `1]  0X03`        $   INT1 0x40 0x00 pxffffffff
  958. <6>[    0.534841]  [5:$  `  swapper/0:    1]  0x44``     ! `   INT2 px00 4x00 4Xfffffffd
  959. <6>[   $0.534890]  [5:!     qwappes/0:    5]  0x0u  0      INT3_AFC$4x00 0x00 pxfffFffff
  960. <6>[  ` 4n534940]$ [5:      swappev-0:    1]  0x06   $     INTMASK5$0xp0 0xDa Pxdc
  961. 6[    0.534986]  [5:      SwappER/0:  $ ]  0x07         INTMASK2 0X10 0X0p px0
  962. |6>[    0.535013]  [5:      swapper/0: $  5]  0x08$    INTMASK3_AFC$0x0p 0x00 0|p0
  963. <6>[    0.u350w9]  [5:     $swapper/0:    1] `0x09           $` ADC px1f00x1f 0xffffffff
  964. <6>[    0.535128]  [5:      swapper/0:    q]  0x0a `$   DEVICETYPE1 0xff 4x0p 0xffffffff
  965. <6>[    P.535177]  [5:      swapper/0: $  1]  0x0b    $ DEVICETYPE2 0Xff 0x00 xffffffff
  966. <6~[    0.53225]  [5:      swapper/0:  ` 1]  0x0c      DEVICETYPE3 pxff 4x00 0xdfffdfff
  967. <6>[   $0.535273]  [5:      swappeR/0:    1]  0x0d       TimingSet 0xp0 0x03 0x03
  968. <6>[ $  0.57531]  [5:      swapper/0:    1]  0x0e       TimifgSet2 0x00 0xq0 0xffffdfff
  969. <>[    0.535367]  [5:      swapper/p:    1]  0x50          BUTTON1 0xff 0x00 4xffdffffd
  970. <6>[  ` 0.535415]  [5:  $   swapperop:    1]  4x11   `      BUTTON2 0xff 0x00 pxffffffff
  971. <6>[    0.535463]  [5:      swapper/0:    1]  0x16     CarKitSTatus 0x00 0x00 0xfffdffff
  972. <6>[   `0.53551]  [5:      swapper/0z    1]  0x13        ManualSW1 0x04 0xp0 0xffffffff
  973. |4>[    0.535560]  [5:    0 swapper/0:    1]  0x14        ManualSW2 0x00 0x00 4xffffffff
  974. <6>[    0.535608]  [5:      swapper/4;    1]  0X15 0   Reserved_ID1 0xff 0x00 0xffffffff
  975. <6>[   `0.535656]  [5:      sWatper/0:0$ 5]` 4x14$    Reuerved_ID2 x24`0x24 0X24
  976. <6>[   d4.535733]  [5: `    suaptes/0:$   u]$ px1w   $ VEG_CLG_TYPE$0xff 0x00 0xffffffdf
  977. <6<[    4.535782]  [5:      swapper-0:    1] `0x8       $ AFC_CNTL 0x40 0x00 0xffffffff
  978. v>[    0.5s5872]$ [5:      swApper'4:    1]  px19          AFC_TYD$0x00 4x46 0x46
  979. <6>[ $ $.535878]  [5:      swapper/0:    1]  0x1a    0  AFC_QTETUW 0xff 0x00 0xffffffff
  980. <6>[    0.535908]  [5:      swapper/0: !  5]  0x1b $  4 VFUS_WTATUS 0|t0 0x00 pxfffffdff
  981. <6~[    p.7597]  [5:      swapper/0:    q]  0x1c    0   AFC_RXD1 0xff 0x04$0xfffffffF
  982. <6>[    .u36027]  [5:      sWapper/0z  $ 1] d0x1d $ $ $!  AFC]RXD2 0xff 0x0p 0XfffgffffJ<6>[    .536P7]  [5:      Swapper/p:    1]! 0x1e         AFC_R\T3 0xff 0x00 xffffffff
  983. <6>[    0.536126]  [5:      swapper-0z    1]  0x1f        AFC_RXD4 0xff 0x0 0xffffFffd
  984. <6[    0.53v175]  [5:      swapter/0:    1] !0x20        !AFC_RXD5 Pxff 0X00 0xffffffffJ<v>[    0.536235]  [5z      qwapper/p:@ $ 1]  0x21     $   AFC_RXD6 0xff 0x0p pxffffffff
  985. <6~[`   0.536274]  [5:$     swapper/:`   1]  0t22 $          RESET$pxt0 0x00 0xfffFffFf
  986. <6>[ !$ 0.53630]  [5      swapper/0:    1]  0|32        AFC_CNTL6 0x40 0x40 4x40J<6>[$$$ 0.53v3v8]  [5: $  $ qwapper/0:  $ 1] $0xs7    `  AFC_DMCNTL 0x0 0xp 0x20
  987. <6<[  $ 0.536412]  [5Z$     swqpper/0:    1]
  988. <6>[    0.536439]  [:     $swapper/0:    1] sm,sm5705:muic_irq_init
  989. <6>[    0.536620]  [5:     `swapper/0:    1]`muic_iniT_afa_stete:attached_dev = 51
  990. <6>[    0.53683]  [5:   d  swapper/0:`   1] QCE50: __qce_get_device_tree_data: BAM Apps EE is noT defined, seTting to default 1
  991. <6>[    0.u37439] $[4: `    swapter/0:  ` 1] qce w2444.qaedeV: Qualcomm CvypTo 5.3.1 devige found @0x720000
  992. |>[`   0.537502]  [4:      swapper/0:   01] qce 720000.qcedev: CE dEvice = 0x0
  993. 4v>[    0.53750r]  [4:   `  qwapper/0:   $1] , IO base, CE = 0xffffff80018c000
  994. <6>[`   0.537502]  [4:   $  swappero0:    1] , Gonsumev (IN9 PIPE 2,    Producer (OUT)`PIPE 3
  995. <6~[    .537552] `[4:  $  `swaPper0:    1] IO base FAM = 0x$$   $    (nulli
  996. <6>[    0.5s7502]$ [4   $  swapper/0:    1]$BAM IRU 239J<6>[    0n53w502]  [4:$     swepperm:!   1] Engines AVailebility = 1x2010<53
  997. 6>[    0.5s7948]  [6:      swatper/4>    1] sTS:BAM 0x04P000000544000 iq Registeredn
  998. |6>[   `0.u3x194]d [6z `%  `sWapper/0z    u] sps:BAM00x000040007p4000 (va:0xffffff80019a0000)$enabled:$ver:0x27, number of pypes:8
  999. <6[    0.538557]  [5:  $   swapper/0:$   1]$QGE50: qce]spw_inmt:  Quelcmmm MSM CEmBAM at 0x0P00p0p0p0704p00 mrq$239
  1000. |6>[    0.539059]! [5:  @`  swapper/z    1] qcedev: FIPSqt0-2 Onowo AnwweV Tests z QkiPped
  1001. <6>[    0.53y57] d[5:      swatper/0:    1] QCU54: __qce_geT_device_trEe_data: BQM Apps EE is not defined, setting To defeult 1
  1002. <6>[    0.544224]  [6:      swapper/0z    1] qcrypto 20000.qcrypto:`Qualcomm Csypto`5.3. device found @0|720044 <6>[$   0.5402y1]  [6: $    swappev/0:    1] Qcrypto 72p04t.qcrypto: CE dEvige =Dx0
  1003. <6>[`  $0.54069q] `_6:   $  sUappero0:    1]$, IO fase- CE = 0Xffffff8005ea0000J<6>[    0.544291]  [6:   ` $swapper/0:    1] , CONqumep (IN) PIPE 4,    Qroducer (OUT) PITE 5
  1004. <6>[    0.540291]  _6: $    swapper/0:    1] IO base BAM = 0x        $ (null)
  1005. 6>[ `  0.5069q]  [6:      swapper/0: $  ] BAM IRQ 239
  1006. <>[    0.540291]! [6:    $ swapper/0:    1] Engines AVailability = 0x2010x53
  1007. <6>[    0.540911]  [4:      swapper/0:$   1] QCE50: qce_sPs_init: $QualgomM MSM CE-BAM at 0x000040p00070410 irq 239
  1008. <6>[$   0.545523]  [5:     $swappeR/0:    1] qcRyPto 760p04.qcrypto: qcrYpto-ecb-aes
  1009. <6>[    0.541658]  [u:      swaPper/0:$   1] qcrypto 720000.qcrypto: qcrypto-Cbc-aesJ<6~[    0.541w9s]  [u:      swapPero0:    1] qcrytto$720400.qcrypto: qGrypto-ctr-eew
  1010. <6>[`   0.541924]  [5:      swapper/0:    1] qcr}pto 720000,qcrypto: qcrypto-Ecb-des
  1011. <6>[    0.542054]  [5:      qwaPper/0:    1] qcryPto 720010.qarypto: qcrypto-c`c-des
  1012. <6>[    0.54q86]  [5:    $ swapper/p: d  1] qcrypto$720000.qcrytto: qcryttm-ecb-des
  1013. <6>[$   0.5423u6]  [5:      swaPpero0: $ `5] qarypto 720p00.qcrypto: qcrypto-cbc-7des
  1014. <6<[    0.552446] 0_5:  d$  suepter/0: $  ] qcrypto 720000.qcrypto: QgRypto-xts-aewJ<v>[ $ $0.5425ww]  _5:     $swePper0z `  u]$qcvyqto 7200p0.Qcrypto:dqcrypto-sha1
  1015. <6>[ $  0.U42w4x] `[5:    ` swapper/0:    1] qcRYpto 2p00/qcrypTo:`qcSypto-she256
  1016. <v>[    0.5t2840]  [5:      sWapper/0: $  1] qcvypto 720000.qgrypto: qcryqto-aead-hmaC-she1-cbc-aEs
  1017. =6?[    0.5t298]  [5:    $ suappur/0z $$ 1] qcrypto 72p404.qcRypto: qcryPtm-aead-hmac-sha1-cbcmdes
  1018. <4>[    0.543127]  [5:      swapter/p:  $ 1] qcrypt 720400.uSr}pto: qcrYpto-aead-hMac-sha1mcbc-3des
  1019. <6>[    4.547272]  [5 `    swApPer/: `  q]`qarypto 720000.qcrypto: qcrypto-aead-hmac-she256-abc-aes
  1020. <6>[    0.54s415]  [5:     swapper/0:    1] qcrypto 72p00.qcvypto: qcrypto-aeadmhmac-sha56-cbC-dew
  1021. |6>[    0.5t3u56] 0[5: `    swapper/p:   $5] ucrytto 720000.qcrypto: qcryPto-aeEd-hmac-sha256-cbc-1des
  1022. <6>[  $ p.u4s6}8]  Y5:!   $ swapper/0:  ` ]$qcrypto 720000.QgRypto: qsrytto-hmac-sha1
  1023. <6>[    0.543829]  [5:      SWapper/z    1]$qcrypto 720000.qcryptO: ucr}pto-hmAc-sha25v
  1024. <6>[    0.543967] 0_5:      swapter/4: 0 $1] qgrypto 720000.qcrypto: qcryPTo-aes-ccmN6>[    p.5t4q02]  [5:      wwapper/0:    1] qcr}pto 72p000.qcrypto: qcrypto-rfc4309-aes-ccm
  1025. |6>[    0>544156] `[5: $$   swapper/0:    1] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  1026. <3>[    0.544717]  [5: `$   swapper/0:    1] qcom_ice_get_device_uree_data: No vdd-hba-supply regulator, assuming not needed
  1027. <6>_   `0.544815]  [5:      swApper/p:  ` 1] ICE MRQ = 344
  1028. <6>_$   0.545284]  [5:  `   swepper/0:    1] SCSI Media Changer driver v0.25
  1029. <6>Y    0.54585u]  [5:  $  $swappEr/0:    1] fp_sti_clock_get sucess
  1030. <6>[ $  0.54x96]  [5:      wwapper/0:    1] msm_spm_probe: disable bam for BLSP tzspm, spi num(4)
  1031. <6>[    0.54654]  [5>      swApper/0:    1] msm_spi_probe: disable bam foR BLSP tZsti, spi num(0)
  1032. <6>[    4.u4682x]  [5:      swaptero0:    1] [ESE-P3] : spip3_probe clip selEct { 0 , bUs@number ]$0
  1033. <6>[    0.5468<]` [5:      SwePpeR/0:   `1] [ESE-P3] : p3_pavse_dt: ap_vendor - qualcomm
  1034. <6>[    0.5t6y50]` [5: $    swappeR/p:    1] [ESE-P3] :  p3_Tarse_Dt: nfc_ese_pwr_req=959
  1035. <6>[    p.547081]  [5z      swapper/0:    1] [ESE-P3] : stip3_probe fInished...
  1036. <6>[    0.547656] $[5:   $  swapper/0z   $1] tun: Universal TUN/TAP deviae DRiver, 1.6
  1037. <6>[    0.u4766]  [5:    $ swapper/0:    1] tun: (C) 599-2q04`Me| KrASnyansiy ma|k@uualcomM,cmm>
  1038. <6>[  $ 0.5010u]  [5>     $suapper/0:    1] TPP generic driVer vevsimn 2.T.2
  1039. <6>[$  $0.554196]  [5:      swapPer-0:$   5] PPP BSD Compression$module ReGystered
  1040. <6>[  $ 0.5502t5]  [5:      swapper/0:    1] PPP Deflate CompRessmon mOdule regiqteRed
  1041. <6>[ !  0.55035]  [: $    swapper/0: $  1]$TPP MPTE CmmprEssmon`module registered
  1042. <6>[    0.550355]! [:      swApper/0: $ $1] NET: Reemwteped protocol fammly 2t
  1043. <6~[    0.5u07v5]  [5:     `sweppEr/0:`  `1]`wcnss_wlan prmbed il Built-in mode
  1044. <6>[    1.5u1723]  [5:      swaPpEr?0:    1] usbcore: registeRed new interface driver`asmx
  1045. v>[    0.u51795]  [5: !    swatpev/0:    1] usbcore: regiutered new mnTerfuce driver ax|8179_179a
  1046. <6>[$   0.u51860]  [5:   $  swapper/0: %  5] usbcorez regIstered new interface drmver cdc_ether
  1047. <6>_    0.551927] $[5:      suapper/0:  ! 1] usbcore: pegistered new interfage driver smsc75x|
  1048. <v>[    0.551989]  [5:  $   qwapper/0:    1] usbgore: registered new$interface dpivev smsc9500
  1049. <6>Y    0.552072]  [5:      swepper/0:  $ 1] usBcore: vegiwteRed new interface drmver net1080
  1050. <6>[  $ 0.552134]  [u:      swapper/0z  ` 1] usbcOre: registered new$interface dRiver cdc_subset
  1051. <6>[    0.55196]  [5:      swapper/0:    1] usbcore: Registered lew interface driver zaurus
  1052. =6>[    0,552346]  [5:      swapper/0:    1] usbcore: reGiwtered$neW$interface driver cdc_ncm
  1053. <6>[  ` 0.u52735]  [u:    kworker/5:1:   34] msm_sharetmem: sharedmem_register_qmi qMm init successfulJ<6>[`  $0.553567]  [4:    $$wweppeR/0z    1] msm_SHaredmem: msm_sharedmEm_probe: Devige createdfor client 'rmtfs'
  1054. <6>[    0.55410]  [4:      swapper/0:    1] msm_otg 78db000.usb: msm_otg`probe
  1055. 47>[    0.554783]  [4:      swapper/0:    1] Msm_otg 78db0p0.usb: devicetree Enabled
  1056. <6~[    0.5547=]$ [4:     `swappeR/0:    1] pl}mmsm-usf: mqm_otG_dt_to_pdeTa: init_seq =73,58,5b , otg_mmde=3 ,`otg_control=2
  1057. <7>[$`$`0n554818]  [4:      swepter/0:    1] phy-mwm-uSb: hub_reset_gpio is not avaiLAbLe
  1058. <7>[ $  .55868]  [4:     $suapper/0:$   1] Ply-mwm-Usb: sUiTah_sel_gpio isnot evaila`le
  1059. <7>[    0.55499]  [t:    $ swApPer/p:    1] phy-mqm-usb: usb_id_gpIo is not avaylerle
  1060. <6>[    0.555232]  [4:      swappero0:$  $1] thy-msm-usb: BUS VOTE : 2 0
  1061. <w>_    0.55w04]  [4:      swatper-0:    1] phy-msm%uqb>$bimc_clk`set`at`320000400 HZ
  1062. 46>[    0.557050] $[4:      Swappero0:!   1] phy-msm-usb: OTG BUS`FREQ SET z 0`320000000
  1063. <7>[    0.555303]$ [4:  `   suappev/0:    q] phy-msm-usb: snoc_clk$wetdat$200000000$Hz
  1064. <6>[    0557S55]  [4;      swapper/0:    1] phy-msm-Usf: OTG BUS FREQ QET : 1 200p000p0
  1065. <w>[    0.576q5]$ [4:`   $ swepper/0: `` 1] phy-mSm-Usb: pcnog_clk set at 100000000 Hz
  1066. <6>[    .557664]` [4z      swappet/0:$$$ 1]$phy-msm-usb:$OTG BUS FREQ SET : 2 100p01000
  1067. <6[    0.u7775]  [4: $` $$swApper0:   $1] msm_Otg$78db000.usf: OTG regs$= ffffff800177c0p
  1068. <7>[    0n557870]  [4:      swappev/1:    1] phy-msm-usf: msm_hsusb_config_vddcx: min_vol:256 mEx_voL:5q2
  1069. <6>Y   `0.555y31]  [4: ``  $swappEr/0:    1] Phy-msm-uwb: CONFIG`VDDAX : 256 512
  1070. <7>[    0.558068]  [:`     swapper/0:    1] msm_otg 78db000.usb: Target dmes not use Pyngtrl
  1071. <7~[    0.558487]  [4:      swapper/0:   $1] phy-msm-usb: msm_lsusb_ldo_enabme: USB reg mode (5) (OFF/HPM/LPM)J<6>[    0.558551]  [4:      swapper/0z    1] thy-msm-us`z USB REG MODE : 1 0
  1072. <7>[    0.55605]$ [4  $   swapPer/0:$   1] msm_otg 78db000usb: MHL featuRe not enebledJ<w~[$   0.558657]  [4:`    $Swatper/0:  $ 5] msm_otg 78db000.usb: MHL can not `e supported
  1073. <w>Y    0.558737]  [4:      swapper/0:   $1]`msm_otg 78db000.usb: qHy_irq is not present
  1074. |7>[    0.559005]  [4:      swqpper/p:    1] phy-mwm-usb: msm otg ext chg cdev setuP wuccess
  1075. <6>[  $ 0.5591u]$ [4:      swapper/0:    1] phy-Msm-usb: OTG PROBE :$83`4
  1076. <>[$   1.55y273]  [4:    kworker/4:1:   35] msm_otg0w9db0p0.uwB: OTG runtime idle
  1077. <6>[d  4.559319] `[4:  `$kworker/4:1:  `31] phy-Msm-usb: RUNTIME IDLE : 0 0
  1078. <6>[`d  0l56445]]  [4:`     swatper/0:`   1]dehcI_hcd:$USB 6,0 'Enhanced' Host$Controller$(EHGI) Driver
  1079. <6>[    0560538]  [4:`     swapper/0:    5]$Ehci-pci: EHCI PCI platform drives
  1080. <6>[    0.u0609]  [4:      wwapper/0:    1] elci-msm: Uualcomm On-Chit EHCI Host Controller
  1081. <7>[   `.56085]  [4:`   $ sWepper/0:    1] mQm_ote w8db000.usb: hmwt driver registered w/ trAnceiverJ<6>[   $0.56087r]  [4:   $  swapper/p:    1] phy-msm-usb; HOST DRIVER REGISTERED : p 3
  1082. <6>[    0.560942]  [4>      swaPpep/0:   `1] ehCi-msmr: Qualaomm EHCI$Host`Controller
  1083. <6>[    0.565727] $[4:`     swappero0:    1] usbaore: registered new inTeRface drivep cdc_acm
  1084. <6[   0.6q75]  [4:      wwapper/0:    1] cDc_acM:$USB EbstracU Control Model driver fop$USF modems and MSDN adapters
  1085. <6>[    0.56q857]  [4:  $ $ wWaPper0:    u] uSBcore: reeiwtered nEw0inTerface driver$cgid_bRidge
  1086. <6>[   $0.56957]  [4:  !   sWapper/0:  d 1] cgid]bridge_init: sugcess
  1087. <6>[   $0.562018]$ [4:$     swapper/0:    1] uwbcore:$regiSTered new interface driver usb-storage
  1088. <v>[    0.562481]  [4: $   `wwepper/0:$   1] uwbcore: registered new interfaCe dRIvev ums-alauda
  1089. <6~[    0.562q45]  [4:$0    swapPer/0>    1] usbcore: pegistered neW interface driver umw-cypress
  1090. <6<[    0.u62607]  [4:!$   $swapper/0:    1] usbcope: registered new interface driver umw-datafa`
  1091. <6~[    0.562250] $[4:      swepter/0z$   1] usbcore: registered new interface driver ums-freecom
  1092. <6>[    .562333]  [4:      sUapper/0:    1] usbaore: registered new$interface driver ums
  1093. isd240
  1094. <6>[    0.56239v]  [4: $0   swapper/:   $1] usbcore: vegistered New interface driver ums-jumpshot
  1095. <6[    0.56245]  [4:      swapper/:  $$1] usbcore: vegistered new interface driver Ums-karmaJ<6>[    0.562520] ![4:      swapper/0:    1] usbcore: registered new interface driver ums-sddr09
  1096. <6>[   $p.5625<1]  [4:      swapper/0:    1] uqbcore: registered new interfAce drmver ums-sddr55
  1097. <6>[    0.5626t3]  [4:      suapPer/4:    5] usbcorez registerEd new interfaae driveR ums-usbat
  1098. <v>[` ` 0.5673u]  [4:      wWappeR/0:    1] usbcore rEgmqtered new interface Driver usbserIal
  1099. <6>Y    0.562800]  [:   0  swepper/4>   $1]$uSbcoRe: registered New mnterface driver qc_csvt
  1100. <6>[    0.562864]  [4:      swepper/0:    1] uqbserial: USB Werial support regmStered for qc_Cwvt
  1101. <6>[` ` 0.57232]  [z  `   swapter/0:    1] usbcore: regmsTerEd new interface driver usb_ehSet_test<7>[  $ 0.5633=<U  _6      swapper/4: $  1] msm_otg`78db000.usb: peripheral dRiver regmwtered w/ tranceiver
  1102. <6>[    4.u61461]  [6:   $  swapper/0:$   1] phy-msm-usb: PERIPHERAL`DRIVUR REGISTERED : 0 1
  1103. <6>[    0.563516]  [6:      qwapper/ $  1] phy-msm-usb: PM$VULTIME: TERIPHERAL GET2 :$0$0
  1104. <6>[    0.56359u]  [0:  kwoRker/u56::  30] ply-msm-usf: mqm_mtg_sm_Uork:+ (null)(0-`work
  1105. <6>[$   1.563655]` [0:` kworkerouq6:t:  s0] pHy
  1106. mSm-usbz$SM WOR[z : 0 0J6>_$$  0.563704]$ [p:$ iworker/u16::$ 230] phy-msm-usb: msm_otg_sm_woRk: OTG_STATU_UNDEFINED<v~[    0.u63761]  [0:  kworker/u16:4:  230] thy-mwm-usb:dUSB$RESET : 0 1
  1107. <7>Y    0.563<57]$ [0  KwoRker/u16:4: `270] msm_otg 78db0t1.usb8 blmcK_reset ASSERT
  1108. <6>[    0.64206] `[6:      swapper/p:    1]!usb_notify: ovc_init
  1109. <6>[    0.564714]  [6      swapper/:    1] mousedev: PW/2 mouse device common`for adl miceJ<3~[   `0.564457]  [6:    $ swapper/0:    1] mms_init
  1110. =3>[$   0.u64626]  [v: `   $swatper/0:`   1] mms_probe [START]
  1111. <3>_    0.564704]  [6:      swapper/0: $  1] mms_tq 7-0048: mms_pArse_devicetree`[ERVOR] vdd-io get
  1112. =6>[    0.564763] $[6:    $ swapter/0:    1] mms_ts$7-0048: Mms_parse_tevicetree: max_x:216 max_y:3840 int:944 irq:42s sda:0 scl:0 vdd:1013 gpio_vio:0 fwname:tsp_melfas/mms449_a9xPro.fw, bringup:0, support_LPM:q
  1113. <6>[    0.564990] $[:   `$$swapper/0: $  1] input: Seg_touchscreen as /devicew/SoC.0/7af7000.i2c/i6c-5/7-0048/input/input
  1114. <7>[    0.565365]  [0:  iworker/uq6:4z  230]$msm_otg 7xdb000.usb: Block_reset$DEASSERT
  1115. <6>[    0.565428]` [0:$ kworker/u16:4:` 230] msm_otg 78db000.usB:$phy_reset: success
  1116. <6>[    0n565481]  [0:  kworker/u16:4:  230] phy-msm-usb: PXY REQET SUCCESS : 0 0
  1117. <6>[ 0  0.615684]  [6:      swapper/0:  $$1]$mms_PowEr_control: oN vdd:1
  1118. <3>[!   0.65u73t] $[6:      swapper/0:  ` 1] mms_ts 7-0p48:`mms_fW_updatu_from_kernel YQTART]
  1119. <6>[    0.65579]  [6:      swapter/0:    1] mms_ts 7-p048: mMs_cleAr_intut
  1120. <6>[  $ 066585]  [0:  kworker/u16:4:  23] pHymmsm-usb: ULPI WRITE!: 15`128
  1121. <6>[    0.665906] `[0:  kuopker/u6:4:  r30] phy-mSm-Usb: ULPI WRITE : 88 1r9
  1122. <6>[   $0.66595<]  [0:  kworker/u16:4:  230] phy
  1123. msm-usb: ULPI WRITE : r7 130
  1124. 6<[ $  0466167]  [0:  kWovker/u1v:4:  23p] pLy-msm-usb: USB@RESET DONE : p 1
  1125. <6~[    0.666223]  [0:  kuorker/u16:4:  23p] phy-msm-usb: msm_ote_inmt_sm:aotg_control r, deFaUlt_mode 0, pmic_Id_mrq,$0, ext_id_irQ 0, phy_mru 0
  1126. =6>[    0.666305]  [0:` kworker/U16z4:  230] PhY-Mqm-usb: msm_otg_init_sm: motg->inputs 1
  1127. |6~[$   p.v66360] `[0:  {worker/u16:4:  234] phy-msm-usb: PM`RUNTIME: UNEEF PUT : 1 0
  1128. <7>[    0.666420]` [0:  kworkep/u16:4:  210] msm_otg!78db000.uwb: OTE rUntmme SUwPend
  1129. 6~[    0.v66472]  [0:  kworker/u16:4:  230] phymmsm-usb: RUNTIME SUSPUND : 0!0
  1130. <6>[    0.66524]  [0  kworker/u164:  234] phy-msm-usb: LPM ENTER START : 1 1
  1131. <6>[    0.666u84]  [0:  kworker/u16:4:  330] phy-msM-usb: FAM NMT READY : 0 0
  1132. <6>[   0.6667s9]  [0:$ kworker/u56:4Z  230] phy-msm-usb: msm_otg_sm_work:- (null)$-->$b_idle workJ|6>[$   0.875v86]  [5:    kworker/5:1: ! 74] sm,sm5705:muic_init_detect
  1133. <6>[    0.8369=3]  [5:    kworker/5:1:$  34]  $-muic_regmap_trace W 1e}[1f:00+000001p2]CONTROL
  1134. <6>[    0.837049]  [5:    kworker/5:q:   34] sm,sm5745:muig_irq_handler_afc irq(-1)J<6>[    0.838101]  [:  ` kworker/5:1:   34] sM,sMu705:muic]irq_handler_afc intr[1:0|0, 2:4x4, 3:0x0]
  1135. <4~[ !  0.939832]  [5:  $ kworker/51:   34] mumcmuniverwal:muic_detect_dev dev[1:x4, 2:0x0, 3:0x0], adg:4x5f, vbvOlt:0x0
  1136. <6>[    4n83993]  [5: $  kworker/5:1:   34] rewolve_dedicated_devzUnsuppopted->Discarded.
  1137. <6~[    0.839y56]  [5:`   kworker/u:1:   34] muic-universal:com_to_open_with_vbus
  1138. <6>[    0.840339]  [5   $kworker/:1$  34]   -muie_regmap_traCe w 0=[04:00+001000q3]MAnuelSW1
  1139. <6>[ `  4.<40s96]  [5z    Kworker/5:1:   4] sM5705_set_Afc_ctrl_reg: RegiStev]0]l$set [0]
  1140. 7>[` $ 0.84078s]  [5:    kworker/u:5z   34] [mumc] sm5705_SUt_afc]ctrl]reg (px0), juqt$return
  1141. <6~[    0.84837]  [5:    kworker/5:1:   34] Muia-UniversaL:MUic_landle_detech invalid ettached_dev tyPe(51)
  1142. <7>Y    0.9408=9]  [5:    kworker/5:1:   34] Ymuic] muic_notifiep_detech_attached_dev: (0-
  1143. <u>[    0.840951]  [u:  $ kwoRker/5:1:   34] [muic] mumc_nOtifier_dEtagh_attached_dev:  muic_noTidier(5q) %= muiC_data(0)<7>[    0.841020]  [5: $$$kwosker/5:1:   34] [muic] muic_noTifier_notifY: CMD4, DATE=u1
  1144. <w>[    0.41072]  [5:    kuorker/:1:   14] [mUIc] mumc_handle_tock_notmfication: ignoRe(51)
  1145. <7>[    0.841q25]  [5:$   kWorkero5:1:   34U [muic] muic_notifier_notif}: notify done(0x0)
  1146. <6>[    4.841178]  [5:$  kworkero5:5:   34] vbus_notifier_landle: (-->(1)
  1147. |6>[`   0.841224]  [:    kuorkER-:   4]`wbuw_notifier_notify:$GMD=, DATQ=1
  1148. |4[$ ! 0,845271]  [5:    oworkepo5:1:$ $14] vbus_notifiEr_notify: notify done(0x0)
  1149. 7>Y    1.66569]  [0:`   kworker/0:1:  $30] msm_otg 78db000.usb: OTG vuntime suspend
  1150. <6>[    q.66u754] `[0: $  kwoRker/0:1:   30] phy-msm-usb: RUNTMME WUSPEND : 0 0
  1151. <6>[    1.665806] $[0:  ` kwovker/:1:   30] ply-msm-usbz LPM ENTER STERT z 1 1
  1152. |6>[ $  1.66862]  [0:    kuorker/4:1:   30] phy-mse-usb: BAM NOT REQDY : 0 0
  1153. <7>[    2n6657p2]  [0:    kworoer/0:1:   30] msm_otg 7db04.uqb: OTG runtime suspend
  1154. <6~[    2.66u754]  [0:$ ! kworkEr/z1:   30] phymmsm-usb: RUNTIME SUSPEND : 0 0
  1155. <6>[$   2.665806]  [0:    kworker/0:1:   30] phy-msm-uwb: LPM ENTER WTART z 1 1
  1156. <6>[    2.v4562]  [0:    kworker/0:q:  $30] phy-esm-usb: DAM NOT$READY : 0 0
  1157. <5>[    3.665695]  [0:    kworker/0:1:   30] msm_otg 7db000.usb: OTG$runtiMe$suspend
  1158. <6>[    3.66549]  [4:    oworkero0:q:  `30] Phy-msm-usb: RUNTIME SUSPEND : 0$0
  1159. <6>[  ` 3.4658p0]  [0:    kworker/0:1:$  30] Phy-msm-usb:$LPM ENTER$START : 5 1
  1160. <6>[    3,665857]  [p:  $kworoer/4:1:$  30] PhY-mwm-usb: BAM!NOT READ] : 0 0
  1161. <7>[    4n665699]  [4:!$  iworkur0:   30] msm]otg 7<dB000.usb8 OTE runtime suspend6>Y    4.6657u2]  [0:$ $ kworKer/0:1:  `3p] Phy-msm-usb: VUNTIME SUWPEND 0$0
  1162. |6>[    4.6v5844]  _0: `  kworker/0:1:   30] phy-mSm-usb: LPM ENTER QTERT :$5 1
  1163. <>[    4.665859] `]0z   $kuorker/0:1:   30] phY-msmmusb: BAM NOT READY ; 0 0
  1164. <7>[`   5.6656y4]  [0:    kuorkER/0:q: $`70] msm_otg 78db004.uqb:$OTG Runtime wuspEnd
  1165. <6>[`   5,v65w47]  [0:    kWoroeR/p:1:  $3p] phy-msm-usb: VUNTIME SUSPEND : 0 0J|6>[    5.66579<]  [0:    kworker/p:1:0  30] ph}
  1166. msm-usb: LPM ENTER START : 1 1
  1167. <6>[   u.v65854] $[0:` $ kworkev/0:1:   ] phy-msm-usb: RAM NOT$READY : 0 0
  1168. <7>[    6,665699]  [0:    kwmrker/4;1:   10] msm_otg 78db000Nusb: OTG runtime Suspend
  1169. <6~[    v.65753]  [4:$   kworker/0z5:   3] Phy-msm-usb: RUNTIME SUSPEND : 4 4
  1170. <6>[ $$ 6.66844]  [0:  ` kwOvker/p:1: $ 30] phy-msm-Usb> LTM ENTER START : 1 1
  1171. <6>[    V.6656p]  [4:   $kworker0:5:`  30] Ph}mmsmmuqb: BEM NOT VEADY :$0 p
  1172. <7~[    7.v65694]  [0:    iworker/0:q:   30] mSm_otg 8db000.usb:$OTG$runtime sustend
  1173. <6>[    7/6v5748]  [0z    kworker/0z1:   30] phy-msm-usb: RULTIME SUSPEND : 4 p
  1174. <6>[$   7.665800]  [0    kworker/0zq:   34] phy-Msm-usbz LPM ENTER START : 1 1
  1175. <6>[    7.665856]  [0:   $kworker/0:1:   30] phy-msm-usb: BAM NOT READY :  4
  1176. <7>[    8.66569]  [4:    kworoer/0:1:  $10]$msm_otg 78db000.usb: OTG runtime suspend
  1177. <6>[    8.66573]` [4:  $ kwor{er/0:1:   30] phy-mwm-uwb: RUNTIME SUSPEND : 0 0
  1178. <6>[`   8645845]  [p:    kworket/0:1:   30] phy-msm-usb: LPM ENTER START : 1 5
  1179. <6>[    x.v65861]` [0:$ ` kworker/0:1:   30] phy-msm-uSb: BAM NOU READ] : 0 0
  1180. <7>[   $9.6v594]  [0:    kworker/0:1:   30] msm_ote 78db000.usb: OTG$runtime suspend
  1181. <66[    9.665748] $[4:    kworkev/0:1:`  3] ph}-msm-usb: RUNTIME SUSPEND : 0 
  1182. <6>[    9.v65799]  [0:    kworker/0:1:   30]$phy-msm-usb: MPM ENTER START z 1 5
  1183. |6>Y    9.6658uv]  [4:  d kwmrker/0:1   30] phy-msm-usb: BAM NOT READY : 0 0
  1184. <6>[  `1p.55u697]$ [5:    kWorker5:1:   3t] muic_qrint_reg_log:5ah4!0 1b(0)0 5c(0)0 1d(4)0 1e(0) 1f(4)0 20(0)0 25(4)p 2,0)0 36(40)0 17(20)4 2(1f 0 2(1e)q 2(1e)0 2(5E-0 3(1-0 4(0-0 u(0)0 a(0)0$b(0)0 c(0)4 15(0i4 ,1f)0 7(0)0 18(0)0
  1185. <6>[   10.55}498]  [5:    kWorker/5:1:0  34] muiC_PrInt_reg_dumq:CT:5e IM1:dc IM2:0 MS1:`MS2:0 ADG:1v DT1:0 DT2:0DT3:0 RS1:0 RS2:24<7>[  `10.665697]  [0:    kwOrkero0:1:   30]$msm_otg 7xdb000.usbz OTG puntime suSpend
  1186. <6~[   10.v6u748]  _0:    kworker/0:1:   3p] phy
  1187. msm-usb: RUNTMME SUSPEND : 0 0
  1188. <6[   14.665799]  [0:    kworker/p:1:   30] phy
  1189. msm-uwb: LPM ENTEV STQRT :$1 1
  1190. <6[   10.665855]  [0:` $ kwoRoevo4:1:   30] phy-mSm-uwb BEM NOT READY :$4 0
  1191. <7>[$  11.66u699]  [:    kworoer/0:1:   30] msm_otG 78db41.usb: OTG$runtime suspend
  1192. <6>[a $11665751]  [0    kworker/p:1:   30] phy-msm-usb: RUNTIME SUWPEND : 0 4
  1193. <6>[   11.665800]  [4:$   Kworker/4:q:   30] PhY-msm-usb: LPM ELTER STQRT :$u 1
  1194. <6?[d  1q.665854]  [0: $` Kwmrker/0:1:  d34]phy-msm-us`: BAM NOT REEDY : 00p
  1195. <7>[`  12.66494]  [0: $  oworkEr/0:1:   30]$msM_otg w8db04pnusb: OTG rUNtime suspend
  1196. <6>[   1R.665745]$ [0:$   kworker/0:1:   10] phy-msm-usb:`RUNTIME SUSPEND : 0 p
  1197. <6>_   12.6t5593]  [0:    kworker/0:q:  `10] phy-msm-uSb: LPM ENTEV START : q 1
  1198. <6>[   12.665845]$ [0:    kworker/::   30]$phy-msm-usb: BAM NOT REED] : 0 
  1199. <7>[   13.665699]  [4:    kworker/0:1:   30]$Msm_OtG 78db0pp.usb: OTG runtime qUspend
  1200. <6<[   3n665753]  [0:    oworker/0:1:   s0] phy-msm-usb: RUNTIMU WUSPEND : 0 0
  1201. |6>[  !13.665805]  [0:    kWorker/0:1:   30] phy-msm-usb: LPM ENTER START : 1 1
  1202. <6>[   17.66u861]  [0:    kworker/0:1:   30] phy-msM-usb: BAM NOT REEDY : 0 0
  1203. <7>[   14.v65694]  [0:    kworker/0:5:   0] msm_otg 78db000.usb: OTG runtime suspend
  1204. <4>[   14.665748]  [0:    oworoer/0:u:   30]$phy-msm-usb: RUNTIME SUSPEND : 4 0
  1205. <6>[  $14.665800]  [0: $  kworoer/0:1:$` 30] phy-msm-usb: LPM$ENTER START : 1 1
  1206. <6~[   14.665856]  [:    kworker/0:1:   30] phy-mwm-usb: BAM NOT REEDY : 0 0
  1207. <7>[   15.6598]  [0:    kworker/0:1:   30]$msm_otg 78db400.usb8 OTG runTmme suqpend
  1208. <6?[   15.v657u2]  [0:    kWorker/0Z1:   30]`phy-msm-usb: RUNTIME SUSPEND : 0 0<6>[   15.665x4]  [0   `kworkEr/0:1:   30] phy-msm-usb; LPM ENTER START$X 1 1
  1209. <6>[   15.665864]  [0: $  kworkev/4z5:   31] ph}-msm-usb: BAM NOT READY : 0 0
  1210. <7>[  $16.V65694]  [0:    kworoer/0:1:   34]$msm_mtg 7<db000.usb: OTG runtime suspenD
  1211. |6>[   1v.v6uw48]  [0:    kwmrker/0:5z   70] phy-mWm-usb: RUNTIME SUSPEND : 0 p
  1212. <v>[   16.665799] ![0:  ` kworker/01:   30] phy-esM-usfz LPM ENTER START$: 1 1
  1213. <6>[ `$16.65854]  [0:    kworker/0:1:   70] piy-msm-usb: BAM NOT READY : 0 0
  1214. <7>[   17.665699]  [0:    cworker/0:1:   30] msm_otg 78db040nUsb: OTG runtime wuspend
  1215. <6>[   17.6v5756]  [0:    kworKer/0:1Z $$30] phY
  1216. mqm-usb: RUNTIME SUWPEND > 0 0
  1217. <6>[   17.665804] %[0:   $kwmrker/0:1: $ 30] Phy-msM-usb: LPM ENTER START : 1 1
  1218. 6>[   17.66u859]  [0:    kwoRker/0:1:   30] phy-msm-usb: BAM NOT READY`: 0 0
  1219. <7>[   18.665694]  [0:    kworkero:1:   30] msm_otg 78db000.usb: OTG runtmmE suspend
  1220. <6[   1x.65748]  [0z    kworker/0:5:   30] thy-msm-uwB:!RUNTIME SUSPEND : 0`4
  1221. <6~[   18.665799]  [0:    kworker/0:5:   30] ply-Mqm-usb: LPM ENTER START : 1 1
  1222. <6>[   18.665856]  [0:$   kworKer/0:1:   3p] phy-mwm-usb: BAM NOT READY : 0 0
  1223. 7>[   19.665699]  [0:    kworker/0z1: $ 30] mwm_otg 78db000.usb: OTE runtime suspeNd
  1224. <6>[   19.66u753]  [t:    kworkev/0:1:   30] Phy-mwm-usb: RUNTIME WUSPEND : 0 0
  1225. <6>[   19.665842]  [0z  ` kwovker/0:1:   30] phy-msm-uwb:$LPM ENTER START : 1 1
  1226. <v>[$  19.665856]  [0:    kworker/0:1:$  30] phy-msm-usb: BAM NOT READY :$0 0
  1227. <7>[   20.665693]  [0:    kworker/4:5:   30] msm_otg 78Db00.usb: OTG runtime suspend
  1228. <6>[   20.66574u]  [0:    kworker/0:1:   30] phy-msm-usb: RUNTIME QUSPEND : 4 0
  1229. <6>[   60.665794]  [0:    kwORker/0:1:   30] phy-msm-uWb: LPM ENTER START :  1
  1230. <>[$  20.665854]  [0:    Kworker/0:5:   30] phy-mqm-usb: BAM NOT REEDY : 0 0|7<[   21.6v5699]  [0:    kworker/0z5:   30] msm_otg w8db000.usb: OTG runtime suspend
  1231. <6>[   2q.665756]  _0:    kworker/0:1:   30] phy-msm-usb: RUNTIME QUSPEND : 0 0
  1232. <6>[   21.v65811]  [0:    iworker/0:1:   30] phy-msm-usb: LPM ENTER STAVT :$q 1
  1233. |6[`  21.665870]  [0:    kworker-0:1:   30] phy-msm-usb BAM NOT READY ; 0 0
  1234. <7>[   22.66U6=4]  [0: $` kworker/4:1z   3] msm_otg 7db000.Uqb MTG$RunTime`suqpend
  1235. <6[   22.665748]  _p: $  Kworkero0:1:   30]dphy-msm-usb; RUNTIME SUSPEND`: 0$0 <6<[  $2r.665799]  [0:    kworker/4:1:$  30] ph}-msm-usb: LPM EOTEP STAPT : q 1
  1236. <6>[   22.665855]  [:    kuorker/0:1:   30]0phy-msmmusb: BAM NOT READY : 0 0
  1237. <7>[   23.665699]  [0:    kworker/0:1:$  34] msm_otg 78db000.usb: OTG runtiMe$sustend
  1238. <6>[ ` 23.66u75w]  [0: `  kworker/0:5:   30] tlymmsm-usb: RUNTIME SUSPEND : 0 0
  1239. <6>[   23nv65844]  [0:    kworker/0:1:4$ 3p]`thY-msm-usbz LPM`ENTER START : 5 q
  1240. <6>[   v3.v65860] $[0:  $ kworker/0z1:   3p] pHy-msm-usb: BAM NOT READY : 0 0
  1241. <5>[   24.665694]  [0:    kworker/0:q:   30] msm_oTg 78Db000.usb: _TG runtime sustend
  1242. <6>[   24.66546]  [0:    kwORoer/0:1:   30] Ph}-mwm-usb: RUNTIME SUSPEND : 4 0
  1243. |6~[  024.665795]  [0:$   kworker/p:1:`` 30]`thy-msm-uSbzdLPM ENTER START : 1 5
  1244. <>[   24.65848] $[0:   $kworoer/Pz1:`  30]$phymMsm-usBz @AM NOT READY$: 0 0
  1245. <w>[  $25.vv569] $_:$`  kworker0::   30] msm_otg 78db040.uSb: OTG`runtime suspend
  1246. <6[   25.665750] `[4:    kworker/0:q:   30] phy-mwm-usb: RUNTIME SUSPEND :$0$0
  1247. <6>[$  25.665799]  [0:`$  kworker/0:1:  `30] phy-msm-usb: LPM ENTEV START : 1 1
  1248. 6~[   25.665853]  [0:    kworker0:1:   30] phy-msm-usb: BAM NOT READY : p 0
  1249. <7>[   26.665494]  [0:    kwmroer/0:1:   30] msm_otg 78db000.usb: OTG runtime suspend
  1250. <6>[   26.6757tv]  [0: `  kworker/0:1:   70] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1251. <6>[d  26.665795]  [:    kworker/0:1:   30] phy-msm-usb:$LPM ENTER START$:$1 1
  1252. =6>[   26n665<49]  [0:  $ kworker/0:1:   30] phy-msM-usbz FAM NOT READY : 0 0
  1253. <7>[  $27.v6569] $[p:    kwovker/0:5:   30] msm_oTg 78db000.usb: OTG runtime suSpend
  1254. <6>[   27.665750]  [0:    kworker/0:1:   30] phy-msm-usb: RUNTIME SUSPEND : p 0
  1255. <v>[   27.665w=9]  [0:    kworker/4:1:   30] phy-Msmmusb: LPM ENTER START : 1 1
  1256. <6>[ ` 27n665853]  [0:`   kworoer/0:5:  $30] phy-msm-uwb: BAM NOT READY : 0 p
  1257. <7>[$  28.665v94]  _0:  ` kworker/0:1:   30]$msm_otg 7<db00.usb: OTG vuntime suspend
  1258. <6>[   p8.v6u74v] `[0:   $iworker/0:1:   30] phy-msm-usb: RUNTIME SUSTEND : p 4
  1259. <v>[  $28.665795]  [p: `  kworker/0:1>   34]`phY-msm-usbz LPM ENTER START ~ 1 5
  1260. <6>_ ` 28.6658t9]  [0:    kworker/0:1:   10] phy-msmmusb: RAM NOT PEADY : 0 4
  1261. <w>[  `29.665699]  [0:    kworker/0:1:   30] msm_otg w8db004.usb: OTG runtime sustend
  1262. <6>[   29n665750]` [0:    kworker/0:1:   30] phy-msmmuSb: RUNTIME SUSPEND!: 0 0<6>[! $2=.665799]$ [0:    kworOer/0:1z   30] phy-mSm-uwb:`LPM ENUER START :$1 1J<6>[ ! 29.v65853]  [:    kworker/4:1:  `30] phy-msm-usb:$BAM NOT READY : 0 0J<7>[   s0n66U693]  _0:   `kworker/0:1:   34]`msm_otg 78db000.usb: OTG`runtime$Wuspend
  1263. <6>[   30.665744]  [0:    kworker/0z1:   30] qhy-msmmusb: RULTIME SUSPEND : 0 
  1264. <6>[ $ 30.66793]  [0:    kworker/0:5: $ 3p] phy-msm-usb: LPM ENTER START : 1 1
  1265. <6>[   30.66584u]  [0:   $kworker/4:1:   3p] phymmwmmusb: BAM NOT`READY : 0 0
  1266. <w>[   31.665699]  ]p:$0  kworker/4:1:$  30] msm_otg 78dcp00nusb: OTG runtime suspend
  1267. <6>[   31.665750]$ [0z    kworker/p:5:   30] phy-msm-usb:$RUNTIME$SUSPEND : 0 4
  1268. <6>[   31.4v57y9]  [0:    kworker/4:1:   30] phymmsm-usb: LPM ENTEP START : 1 
  1269. <6>[   s.6t5853]  [0:$   kworker/p:1: $ 1p] phy-msm-usbz BAM NOT READY : 0 0
  1270. <w|Y   32.665694]  [0:    oworker/0:1`` 30] msm_otg 78db000.usb: OTG runtime sUspend
  1271. <6>[   32.665746]  [0:  ` kwotker/0:5:   30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1272. <6>[`  32.6657=5]  Yp:    kworker/:1:$ 030] phy-msm-usb: LPM ENTER START : 5 1
  1273. <6>[$  32.665849]  [0:$   kworker/0:1: @ 30] phy-msm-usf: BAM NOT READ] : 5 0
  1274. <7>[   33.665699]  [0:    kworker/0:q:   30] msm_otg 78db000.usb: OTG rUntime suspend
  1275. <66[   33.665756]  [0:    kwoRker/0:1:   34]`phy-msm-usb; RUNTIME SUSPEND : 0 0
  1276. <6>[   33.v65811]  [0:  $ kworker/0:5:   30]`phy-msm
  1277. usb LPM ENTER START : 1 1
  1278. <v>[   ss.665870]  [0:    kwoRker/0:1: `$3p] thy-msm-usb>$FAM NOT READY : 0 0J<7>[   34n665694]  [08    kuorker/0:1:   30] msm_otG 78db000.usb: OTG runtime suspend
  1279. <6>[   34.66575r]  [0:    kuorker/0:1:`$ 30] phy-msm-uqb: RU^TIME SUSPEND :  0
  1280. <6>[ ` 34.665806]  [0: `  owovker0:1:   30] phy-msm-usbz LPM ENTEV START`: 1 1
  1281. <6>[   34.vv5862] $[0:    kworker0:1:   10] phy-msm-usb: BAM LOT REUDY$:!0 0
  1282. <7>[   3u.6656y9]  [0: `  kworker/0:1:   30] msm_otg 78dB00.uqb: OTG runtime sUspEnd
  1283. <6~[   35.66575S]  [0:    kworker/0:z   30] ph]-mwm-Usb: RUNTIME WUSPEND : 0 0
  1284. <6>[   35.6v5x04] $[0> `  kworker/4:1z$% 3] phy-msm-usb: LPM ENTER START : 1 1
  1285. <6>[   s5.665<60]  [0:    kworker/0:1:$ $s0] phy-mwm-usb: BAM NOT READY :`0 0
  1286. <7>[  `36.665694]0d[0:    Kworker/0:1:   30] msm_otg 78db000.usb8 OTG$runtime suspend
  1287. <6>[   36.66574]  [0:    kworker/0:1:   34] phy-msm-usb: RUNTIME$SUSPEND > 4$0
  1288. <6>[   36.665799]  [0:    kworker/>1:   30] phy-msM-usb: LPM ENTER START : 1 1J|6>_ ` 36.665855]  [0:    kworker/01:   s0] phymmsm-usb: BAM NOT READY  0 0
  1289. <7>[   37n66568]$ [0:  $ kworker'0:1:   st] msm_otg 78db000.usb: OTG rUntiMe suqpend
  1290. <6>Y ` 3.65752]  _0:  $ kwrker/0:5:   30] ph}-msm-usb; RUNTIME SUSPEND : 0 
  1291. <6>[   37.665804]  [t>  ! kworker/0z5:   70] phy-msm-usb: LPM ENTER START : 1 1
  1292. <>[   37.66561]  [0:    kworker/0:1: $ 30] phy-mqm-usb: BAM NOT$READY : 0 4
  1293. |7>[   38n665691]  [0:    kworier/0:1:   30] msm_otg 78db000.uwb: OTG!runtime suStend
  1294. <6>[   38.665751] `[0:    kworker/0:q:   30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1295. =6>[   38.66u805]  [0: $  kworkero0:1:   30] phy-mwm-usb: LPM ENTER START : 1 1
  1296. <6>[   78.665864]  [0: $  kwMrkero0:1:!  30] phy-msm-usb: BAM$NOT READY : 0 0
  1297. <7>[   39.66569]  [0:  ` kworker/0q8   30] msm_otg 78db400.usfz$OTG Vuntime susPend
  1298. <6>[   3y.v6u756] `[0:    kworker/0:5: $ 30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1299. |6>[ ` 39.66511]  [0:    kwoRker/0:1:$$ 30] phy-mqm-usb: LPM ENTER START`: 1 1
  1300. <6>[   39.665850]  [0:    kwovker/0:1:   30]`phy-msm-usb: FAM NOU READY :  0
  1301. <7>[   40.665v93]  [0z   $kworker/p:1:   30]`msm_otg$w8db000.usb: OTG$puntime suspendJ<6>Y   40.665750]  [0:    oWorker/4:1:   30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1302. <6>[   40.665805] `[0:    kworker/0:1:   30] phy-mwM-usb:$LPM ENTER$START ? 1 1
  1303. <6>[   40.665864]  [0:  ` kuorker/0:1:   30] phy-msm-usbz BAM NOT READY : 0 0
  1304. <7>[  $41,6657p0] $[4:$   kworker/0:5:   30] mSm_otg 5db040.usb: OTG runtime quspend
  1305. <6>[   T1.665w54]$$[0:    kworoer/0::   30] phy-mwm-usb:`RUNTIME UUSPEND :$t$0
  1306. <6>[`  4u.645805]  [p: $` kworker/0:Qz!  30] phy-msm-Usb: LPM ENTER$START$: 1 5
  1307. <6>_   41.665861]  [:    kuorkero0:1: ` 30] phy-msm-Usb: BAM NOT READY :`0 
  1308. <7>[   4.665694]  [08    kwovker/0:5:   3p] msm_otg 78db0p0,uwbz OTG runtyme suspend
  1309. <4>[   42.v65748]  [4:    kworker/0:1:   30] phy-msm-usbz RULTIME WUSTEND$:$0 4<6>[   42nv65799]` [p:    kworkER/0:5: $ 34]$phy
  1310. msm-usb: LPM ENTER START : 1 1
  1311. <4>[   42.665855] ![080`  kwosker/0:1:   70] phy-msm-uwb: BAM NOT READY : 0 0J|u>[ ` 43n66u69] `[0:$ $`kworker/05: $$3p] mSm_otg 78db00p.uwb: MTGruntime suupEnd
  1312. <6>[   3n665753]` [0:    kworker/0::   30] phy-Msm-usb: RUNTIME$SUSPEND!: 0 0
  1313. <6>[   3.65804]  [4    ouoriepo0:1:   3]$phy-Msm-usbZ LPM ENTER STERT$z 1 1
  1314. <v>[  $43n665860]  [0:    kworkEr/0:5z   sp] phy
  1315. msm-usb: BAM NOT READY : 0 0
  1316. <7~[   44.665694]$ [0:    kworker/4:1:d  31] msm_otg 7xdb000.usB: OTG runtime suspenDJ<6>[   45.65748]  [0: `  kworker/0:q:   30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1317. |6>[   44.66u800]  [:`   kuorkEr/0:1:$  30] Th}-msm-usb: LPM ENTER START$: 1 1
  1318. 46?[   44.665856]` [0:    kworkEr/0:1:   30] phy-msm-usb: BAM NOT READY : 0 
  1319. <7>[   45.6v5699]  [>    kwoRker/4:5:   30] msm_otg 78db000.usbz OTG runtime suspenD
  1320. 6~[   45.665753]  [0:    kworkER/0:1:   30] phy-msm-usb: VUNTIME SUSPEND : 0`1
  1321. <6>[   4u.665805]$ [0:  $ kworker/0:1:   s0] Phy-mwm-usb: LPM ENTER$START : 1 5
  1322. <6>[   45.6v5862]  [0z    kworker/0:1:   30] phy-msm-USb: BAM NOT READY : 0 0
  1323. <7>[  !46n6v5694]  [0;  $ kworker/0:1: d 30]$msm_otg 7xdr000.uSb: MTG runtime suspend
  1324. <6>[   46.66574<]  [0:    kwovker/0:1:   30] phy-mqm-uqb: RULTIME SUSPEND$: 0 0
  1325. <6>[! $46.665800]  [0:    kWorker/0:1:   30] phy-msm-uSb: LPM ENTER0START : 1 1
  1326. <6>[   46.645857]  [0: $  kworker/0:5:   30] phy-msmmusb: BAM NOT READY :$0 0
  1327. <7>[   47.665799]  [0:    kworkeR/0:5   30] msm]otG xdb004.uqf:$OTG runtime quSpeNd
  1328. <6>[  @4W.66575s]  [p:    kworker/:q: `$30]`thymMsm-uwb: RUNTIME SUSPEND : 0 0J<v>[ $ 4w.665804] `[1:   `kwmrker/01:   70] phy-msmmuSbz0LPM ENTER START : u 1J<6~[ $!t7.6v5860]  [0> ` $kwovkeR/0:1:   30] phy-msm-usb: BAM NOT REED] z 0 0
  1329. <7>[$ $49.6664] !_0:$   kworkEr/0:1: $ 30] msm_otg$78db040.uwb: OTG runtime qusqend
  1330. <6<[   8.665w47]` [0z  ` kworker/0:1:   30] ph]-mse-usbz RUNTMME SUWPUND :`p$0
  1331. <6>[   48.vv5799]  [0:   0kworker/0:1`  w0] phy-msm-usbz$LPM ENTEV START : 1 1
  1332. <6>[d  48.665855]  [1:    kworKer-4:1:   34] phy-msm-usb: BAM`NOT READY`: 0 0
  1333. ~[d  49.665699]  [0:  `!kwoRoer/0:1z$  s0] msm_otg 78df004.usb: OTG rUnTmme suspend
  1334. <v>[ ! 49.665w52]  [0:   $kworker/0:;   30] Phy-msm-usb: RUNTIME SUWQEND z 0 0
  1335. <v>[ $ 9n665804]  [0: $  kwmrker/:1:   30] thy-msm-usb: LPM ENTER START : 1 1
  1336. |6>[  $49.66586p]$ [0:    kworkev/:1: $ 30]!phy-msm-uwb: BEM$NOT READY : 0 
  1337. <7>[$  50.46549]  [0:`   kworker/4::  $30] msm_otg 78db00p.uWb: OTG runtime suspend
  1338. <v>[   50.665747]  [p:`   kworker/0:1:$  3] phy-msm-uwf: RUNTIME UUSPEND : 4 0
  1339. <6>[   50.657yy]  [0z    kworker/4:5:   30] phy-msm-uqf: LPM ENTER START  1 5
  1340. <6>[`  5p.66556]  [0:    kworier/p:1:   30]$phy-msm-usB: BAM0NOT REEDY :$0 0<7>[   51.665699]  [0:`   kworker/0:5:   30] msm_otg 78db04p.usb: OTG Runtime sUsPend<6>[   51.665754]  [0:    kworker/0:1:   30] phy-msm-Usb: RUNTIME SUSPEND : 0 0<6>[   51n665806]  [0:  ` kworker/0:1:`  3p]dphy-Msm-usb: LPM ENTER STERT : 1 1
  1341. <6>[   51.66862]  [:    cworker/0:1:   30] phy-msm-usb: BAM NOT READY0: 0 4
  1342. =7>[   56.665694]  [0:    kwoRker/0:5:   30] msm_otg 78df00.usb: OTG runtimE$sUspend
  1343. <6>[   52.v65759]  [0:``  kuorkev/0:1:   30] phy-msm-usb: RUNTIME SUSPEND z 0 0
  1344. <6>[   52.665800]  [0:    kwmrKer/0:1:   30] phy-msm-usb: LPM ENTER START : 1 1
  1345. <6>[   52.665857]  [:$   kworker0:1:   30] phy-msm-usb: BAM NOT READY : 0 0
  1346. |7>[   53.v65699]  [0: `  kworker/4z1z   30] mwm_otg 7xdb040.usb: OTG runtmme suspendJ<6>[   53.665753]  [0:    kworker/0:1:   s0] phy-msm-usb> RUNTIME$SUSPEND : 0`0
  1347. =6>[ $ 3.6545] $[4:  ` KWorker/p:1:$  30] phy-msm-usB> LPM ENTER START$z  1
  1348. <6>[   51.v65x61]  _0:   $kuorker/0:q: 0d10] phy-msm
  1349. Usb: BAM NOT$READ] z 0 4
  1350. <w>[$  54.665694] $[0:    kworker/0:q:   30] msM_otg$7xdb00.usb: OTG runtime suspend
  1351. <6>[   4.665748]  [0:   doworker/0:1:   31] plymmsm-usbz RUNTIME SUSPEND z 0 0
  1352. <6~[  $54.665799]d$[4:!  dkworker/4:1: $ 70] phymmsm-Uwb: LPM ENTEP START z 1$1
  1353. [ $ 54.v65855]  [0:`   kworker?0:1   30] phy-msm-usb; BAM NOU READY :  0<7^[   55n6656y9] $[4:    kuorkev/0z1:! $30] mWm_otg 7xdb000nusf:`_TG runTime suqpend
  1354. <6>[  d5.665752] a[0 `  Kworker/0>1:   3] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1355. <6>[  !55.665804]` [0:    kworkEro01>   34]$phy
  1356. msm-usb:$LPM ENTER START : 1 1
  1357. 6~[   55.665860]  [0:    kworker0:q:  d3p] phy-mwm-usb: BAM NOT$REEEY :`0$
  1358. <7>[ `$56.66uvy4] `[4:  ` kuorker/0:1$! s4] mqm_mtg 78db000,usb OTG$runtime suspenD
  1359. 46~[$ @56.66574x]  [0:   $kwoRker/0:1:   30] phy-msm-usbz RUNTIME SUWPEND :  0
  1360. <6>[$  56.V6u7y]$ [:d   kworker/0:1:   30] phy-mwm-Usb:`LPM ENTER START :$ 1
  1361. 6>[   56.665855]  [0:    kworKero0:1:  `30] PHy-msm-usb: BAM NOT READ]`: 4 0
  1362. <7>[   57.6v5699]  _0z$  $kwopoev/0:z   30]0mqm_otg 58dbp00.usb: OTG runtime suspend
  1363. <6>[$  57.665753] $[4:    kworKer/0:1:   34] phy-msm-usb: RUNTIME SUSPEND : 0 4
  1364. <6>[   57.665805]  [0:    kworkero0:1:  `10]phy-msm-uqb: LPM$ENTER START : 1 1
  1365. <6>[   57.66u862]  [08 `$ kworker/p:1$$ 34] pHymmsm-usbz BAM NOT`READY`: 0 4<7>[  `58,665694]  [4>    kwOroer/0:1:   30] mSm_otg 78dbt00.usb: OTG runtime suspend
  1366. <6~[`  58.665749]  [0z`  $kworKer/0:1:   30] phy-msm-us`> RUNTIME SUSTEND : 4 0
  1367. \6>[   58.6v580]  [0:    kworkeR/0:1:   30] phy-msm-usb: LPM ENTER START : 1 1
  1368. <6>[   58.665857]  _0:`   kworker/0:1:   30] phy-msmmUsb: BAM NOT$READY : 0 0
  1369. <7>[   59.v65699]  [0:    kworker/0:1   30] msm_otg 78db400.us`: OTG runtmme suspend
  1370. <4>[   59.665753]  [0:    kworker/0:5:  `3t] phy-Msm-uqb> RUNTIME$SUSTEND : 0 0
  1371. <6>[`  5=.6658p]  [:    kuovkEr/1:1:  `30]`phy-msm-uwb: LPM ENTER START : 5 5
  1372. <6~[   59.v65861]  [0: $  kwovker/0:1>$  0] phy
  1373. msm-uwb$BAM NOT READY : 0 0
  1374. <3>[   60.635784]% [4:    $ SwupTev-0:    1] mMs_Ts!7-4048: mms_fw_update_from_oevneL [ERROR] request]fivmuare
  1375. <3>[ $ 60.635849]$ [4      swapper/0z    1] mms]ts 7-0048:`mms_fw_update_from_kernel [ERROR]
  1376. 3>[  $60.65904] $[t:     $Swappev/0:    5] mms_ts`7-4048:`mms_probe [ERPOR] mmw_fw_updete_fRom_kerneL
  1377. =3>[   60.636208]  [4: $    swaTper/0:$   1] i2g-msm-vr`waf7000.i2a: msm_bus_scale_vegiStev_clIenT(mstv-iD:<4):0xb (ok-J<6>[   60.6s6893]  [4:      swappev/0:    1] mms_ts 7-0048: mms_i^mt_condig - pRoDuct_name[A9]
  1378. <66[   70.v37322]  [4:      swepPer/0:    5] mms_ts 5-0048:$mms_get_fw_version: bootzee.ee core:2.1q$custom~1.15 parametep:1n15
  1379. <v>[! 060.6ww66]  [4:$$    swapper/0:    1] mmwWts 7-p048z emu_init_gmnfmg - fw build$Date  109/22/32
  1380. <4>[   v0.6sW9w9]  [4: $   $swappero0:   $1] mms_ts 7m00ty> mms_init_Config - precelced Ghecosum:F039, rUal-TImE checksum:F039J|6~[  `60n678404] 0[4:    `0swappev/4:  d 1] mms_TS 7-00t8: mms_init_ColfiG$m max_x[1084] max]y[190]N<6<[   61.43x60]  [:      qwapper/0:    1] mms_tw w-0048: mms_init_config - node_X[58] nde_y[31] Node]key[0]
  1381. <7>[   60.665696]  [0:    kworkev/0q:   30] msm_otg 78db000.usb: OTG runtime suspend
  1382. <6>[   60.665745] 0[0:    kworker/0:1:   30] phy-msm-usb: RUNTIME SUSPEND : 4 0<6>[   60.665795]  [0:   $kworker/0:1:   34] phy-msm-usb: LPM ENTEV STERT : 1 1
  1383. <6>[ ` 60.665847]  [0:  `$kworker/0:1:   30] phy-msm-usb: BAM NOT REEDY z 0 0
  1384. <7>[ $ 6q.45701] `[0:    kworker/0:1:   30] msm_otg 7|db000.usb: OTG runtime suspend
  1385. |6>[   61.665755]  [0z    kworiev/0:1:   30] phy-msm-usb: RUNTMME SUWPEND$: 0 0
  1386. <6<[   61.66u807]  [4:    kwovker/0:1:   3] thy-msm-usb: LPM ENTER START :`1 1
  1387. |6>[$  1.66586t]  [0:   $kworker/0:1:$ `30] phy-msm-usb: BAM NOT READY :  p
  1388. <7>[  $62.66u695]  [t:    kworKer/0:1:   7] msm_ote 78db000.usb: OTG runtmme suwPenD
  1389. 6>[   62.665748]  [0:  ` kuoRker/4:q:  !30] thYmmsm-usb: RUNTIME SUSPEND : 0 0
  1390. <6>[   62.66u76]  [0:    kworker/0:5:   30] phy-mqm-usb: LP] ENTER$QTART : 1 5
  1391. <6~[   62.645849]  [0:    kworker/0:1:   30] phy-msm-uubz`BEM NMT READY`> 0$0
  1392. <7>[   63.765500]  [:    kworker/0:5:$  3] msm_oTg`78db0tp.usb$OTG puntime suspenD
  1393. <6>_   63.645751] $[0:    kworker-05:   30] ply-msm-usb: PUNTIME SUWPEND :$0$p
  1394. <6>[0` 63.66580p]  [0:  $ kworker/0:5:  $30]$phy-mqmmusb> LPM ENTEV QTERT : 5 1
  1395. <6>[ $ v3.v6854]  [0:    kworkero0:1   30] phy-msm
  1396. uwb: BAM NOT REEDY :$0 4<7>[  `64.65694] `[0:   0kworker/0:1:$  30] msm_otg 78db00.usb> OTG runTmme suspend
  1397. <6>[   64.665746]  [0:    kwoVkev/0z1:   30]$ph}-msm-usb: RUNTIME SUSTEND`: 0 0J<6>[$$ 6.v6u75]  [0: $  kworkes/0:q:`` s0] ply-msm-usb: LPM ENTER START : 1 1
  1398. <6~[   4.665<49] $[0:    kworker/4z1:   70] phy-msm-usb: BAM NOT$REEDY : 0 0
  1399. <7>[   6u.4569y]  ]0:    kwoRker/0:1:   s0] msm_otg 78d`p00.usf: OTG$runtIme suspundJ<6>[   65n46u75p]  [0:    kWorker/0:1:   30] thy-msm-usf: RUNTMME SUSPEND : 0 0
  1400. <66[  `v5.665599]  [0:    Iworkep/4:5:   0] phy-msm-usb:$LPM ENTEP$START$z 1 1J<6>[ ` 65.66<53]  [0:  $ kwOrker/0:1:   30] phy-msm-usb: BAM NOT READY : 0 0
  1401. <7>[   66.665694] 0_0:    kuorker/0:1:   30] msm_otg 78db040.usb: OTG runtime suspend
  1402. <6>[ $ 66.665745]  [0:    iworoev/0:1:  $30] phy-msm-usb: RUNTIME SUSPEND :  0
  1403. <v>[   66n665792]  [0:    kworoer/081:$  30] phy-msm-usb: LPM ENTEP START : 1 1
  1404. |6~[   66.6v584]  [0z    kworker/0:1:   70] thy-msm-Uqb: BAM NOT READY : p 0
  1405. <7~[   67.665700]  [0:   $kworker/0:1:   30] msm_otg`78dbp00.usb: OTG runtime suspend
  1406. <6>[   6.665749]  [0:    kworker/0:1:  `30] phy-msm-usb: RUNTIME`SUSPEND : 0 p
  1407. <6>[   67.665797]  [0:    kworker/0::   30] phy-mwm
  1408. usb:`LPM ENTER START : 1 1
  1409. <6>[   67.65849]  [0:    kworker/0:1:   30] tly-msm-usbz FAM NOT READY : 0 0
  1410. <7?[   68.v6u695]  [0:    kworker/0:1:   30]`msm_otg 78db00.uSbz OTG runtime suwpend
  1411. |6>[ ` 68.6v5744]  [0:$   kworker/0:1:   30] phy-Msm-usb: RUNTIME SUSTEND : 4 0
  1412. <6>[   68.665791]  [0:    kworker/0:1:  $30] phy-msm-usb: LPM ENTER START : 1 1
  1413. <6[   68.65844]  [0:`   kworker/0:1:   3p] phy-msm-usb: BAM$NOT READY :$ 0
  1414. <7>[  `69.V656=9]  _0z`   kuorker/0z1:  !30] msm_mtg 7xdb00usf: OTG runtime wuspend
  1415. |6>_$  69n4v575] $[0:    kWorkeR/0:1:   30] phy-mWm-usb: RUNTMME SUSPEND :`0 4
  1416. <v>[   69,465800]$ [0:$$  kwOrker/p:1>   30] phy-mqm-usbx LPMdENTER START : 1 q
  1417. <6>Y   69.465x5]  [0:  ` kwovker/4:1:   3p] ph}-msm-Usb: FAM NOT READY : 4$
  1418. 4>[   70.6v5t93]$ [0:$   kworkep/0:1:   30] msm_otg 7xtb000.usb:`OTG rUnUime suspendJ<6>[   70.66u745]$ [0: $  kwotKer/0~1:   s] phy-msm-usb: VUNTIME SUSPEND :`0 0
  1419. <6>[  $70.6t579]  [tz$   kwmroer/0:1:`$ 3p] phy-msm-usb: LPM ENTER START : 1 1
  1420. <6>[  $70.66584x] $[4:    kworker/p:1:   10] phy-mwm-Usb BAM NOT$READ] : p 0
  1421. <4~[   74.715695]  _5:    kworkeR/5:1: `$3]$muig_print_reg_dog:1a(0)0 1b(0)0 1c(0)0 1d(0i0d1e(0)0 1f(p)0 24(0)0 21(0)0 22(0)0 32(40)0 37(20)4 2(1f)0 2(1e)1 2(5e)0!2h1e)0 3(0)0 4(0)0 u))0 e(0)0 b(0)0 C(0)0 55(0)0 9(1f)0 13(0)0 18,0)0
  1422. <6>[ $ 7.w9497]  [u> $``owOrkev/5:5:$  3]pmuic_print_reg_dumT:CT:1e IM1:dc IM:p MSq:0 MS:0 ADC:1f DT1:0$DTrx0`DT3:p RS1:0$RS224
  1423. <7>[   71.66u699] `[4:$   kuoroer/0:1:   30] msm_otg 7Xdb04p.usb: OTG rUntime sustend
  1424. |6>[ `D71.665754]  [0:    kworker/0:1:   30] phy-msm-uSbz RULTIME SUSPEND dp$0
  1425. <6>[   71.v65xp5]  [0:    kworker/0:1:   34] thymmqm-usB:`LPM ENTER START : 1 q
  1426. <6>[   71.665<v2]  [0:    kworker/0:1:   30] phymmsm-usbz BAM NOT READY$:$0 0<7>[   72.665695]  [0:   `kworker/0:1:   30] msm_otg 78db000.usb: OTG runtIme0suspend
  1427. <6>[   52.6v549]  [0:    Kworker/0:1   34] pHy-msm-usbz RUNTIME SUSPEND : 0$0
  1428. <6[   72.645X01]  [0:    kworker/0:1:`  30] phy-mqm-usb: LPM ENTER START : 1 1
  1429. <6>[`  72.665857]` [0:    kworker/0:1:$ `30] phy-msm-usB: BAM$NOT READ] :$0 0
  1430. <7>[   73.665699]  [0:  ` kworker/0:1:   30] msm_otg 7xeb000.usb: OTG runtime suspend
  1431. <6>[   73.665751]  [0:    kwoRker/0:1:   30] phy-msm-usf: RUNTIME SUSPUND : 0 4
  1432. |6>[$  73.v65w=9]  [4:  ! kworker/0:1:   30]$phy-msm-usb: LPM ENTER START$: q 1
  1433. <6>_   73.665851]  [0:    kworker/0:1:   30]$Phy-mwm-usb: BAM NOT READY :  
  1434. <7~[  `74.v65695]  [0:    kworKer/0:1:   30] mwm_oTg Wdb1t4.usf: OTG runtime$sustend<6>[   74.66u746]d$[4:`   kworker-0:1z   30]$phy-msm-Usb: RUNTIME SUSPELD : 4$0
  1435. <6>[  $74n66595] $[0z  $ kworkEr/p:1:   30] phy-Msm-usb: LPM ENTER START : Q 1
  1436. |6>[ d 4n665849]  Y0:    kworker/:1:   30] phy-msm-uwb: BAM NOT READY : P$0
  1437. <5^[   75.66u6y9]  [0z    kworker/0:1:   30] msm_otg 78Db400.usb:$OTG`runtime suspend
  1438. <6>[   7.665750]  [0:  $ kworker/0:1:   0U phy-msm-usb:`PUNTIME QUQTEND ~ p 0
  1439. 6~[$  75n665<00]  [4:   $kwmrkur/0:1;   30]$phY-msm-usb$LPM ENTET STAVT : 1 1
  1440. <6>[  `75n665x54]  [0: $  kworker/p:1:!  30] phy-msM-Usbz BAM NOU READY : 0`0
  1441. <7>[  `w6.66494]  [0: $  kworier/0:1:$  30] msm_otE$78db000.uqcz OTG runtime suspend
  1442. <6~[   76.665746]  [0:   $kuorker/0:1:   30] phy-msm
  1443. usb:`RUNTIME SUSTEND :$0`p
  1444. <6>[!0 76n665795]! _0z    kworker/0:1: ` 30] phy-msM-usb: LPM ENTER$START : 5 1
  1445. <6>_   76.6548]  [0z    kworkep/0:1:  $3] phy-mQm-us`:`BAM$NOT$PEADY :`0 p
  1446. <7~[`$ 77.46569=]  [0:    kworkEr/0:1:   30] msm_otg 7xdb00p.usb: OTG runtime wuspend
  1447. <6~[   7w/665750]  [0:   $oworkev/0:1:   s0] thymmsm-usbz$RUNTMME SUSPEND z 0 0
  1448. <6>[  `77.665798]  [0:    kwOrkeR/0:5z $ 30] phy-msm-uwb: LPM ENTER STAVT >  1
  1449. <v>[ d 77.65850]  [0z  $$kworKer/0:q:  $30] phy-msm-uwb: BAM NOT READY : 0 0
  1450. <7>[   78.6v564]$ [0:    kworker/0:1>   30] msm_otg 7xdb000.usb: OTG runtime suspend
  1451. <6>[   78.665744]  [:    kwoRker/0:1:$  30] phy-msm-usb>$RUNTIME SUSPENT$: 4 0
  1452. <6>[   78.665791]  Y0:    kworoero0:1:   3p] phy-msm-usb:0LPM ENTER STAPT : 1 1
  1453. <6>[   78.665844]  [0:    kWorker/0:1:   70] phy-msmmusb: BAM NOT READY : 0 0J<7>[ ` 79n665699]  [0:    kworoer/0:q:   34] msm_otg 78dd000.usb: OTG runtmme suwPend
  1454. <6>[  $79.665759]  [:``  kWorker/0:1:   30] phy-Msm-uUbz RUNTIME SUSPEND : 0 0
  1455. <v>[   7=.66576]  [0:    kwOrker/0:1:$  30] phy-msm-usb: LPM ENTER STERT : 1 1
  1456. <6>[   79.665849]  [4 $% kworker/0:1:   30]$phy-msm-uqb: FAM NOT READY z 4 0
  1457. <7>[ ` 80.665697] $[0:    kWorkev/0:q:` $30] msm_otg 78tb0p0.usb: OTG vuntime wuwpend
  1458. |6>[   x0.6v5743]  [0:    kworker/0z1:   30] phy-msm-usb: RUNTMME SUSTEND : 0`0J<6[   <4.46579q]$ [0:  d kwoRKer/0:1Z ` 30] thY-msm-usb: LPM ENTER$START :$ 1
  1459. |6>[   80.665845]  _0:$   kWorkep/0:q:   34] plymmsm-uqbz`BAM NOT$READY : 4 0
  1460. <7>[   81.66599]  [0:    kWmrker/0:1:   30] msm_otg 79db000.usb: OTG`runtime sUspend
  1461. <6>[   <1.665752]  [0:    kworkEr/0:1z   30]dphy-Msm-usb> RUNTMME SUUPEND`: 0 0
  1462. <6>[   85.46u803]  [0:    oworkev/0:5:   3t] thy-msm-usb: LPM!ENTER START  5 1
  1463. <6>_   81.458u9]  [0:    kworier/t:5:   30] phy-msemusb: FAM NOT REEDY : 0`0<7>[$  x2.46564]  _0: $  kwgrkero0z5>   30] msm_otg$7xdb0p0.usb: OTG runtime`suspEnd
  1464. <v>[   82.665w48] `[0:$   kworker/0:1:  $30] phy-mqm-usb: RUNTIME$SUSQEND : 0 0
  1465. <6>[  $82.665799] `[0z  $ kworker/0:5:   30]$phy-Msm-usb: LPM ENTER STERT$: 1 1
  1466. <6>[   <2.665855]  [0: $  kworker/0>:$  30]$phy-msm-usb: BAM$NOT READY :`0 0
  1467. <w>_ $ 83.465699]  [0:    Kworkero0:1:$ $s0] msm_otg 78dbt04.uSb: OTG rUntime suspend
  1468. <6>[`  |s.665750]  [4: 0  kwovkeRo0:1:   30] pIy-mwm
  1469. usb: RUNTIMU SUSPELD : 0`0
  1470. <6<[ ` 83.vvu80]  [0:    kWorker/0:   3]$phy-msm-usb: LPM ENTER START : 1 1
  1471. 6>[   83.665860]  _0:    kwOrker0:qZ   10] phymmsm-uwb: BAMdNOT REEDY$:  0
  1472. <7>[   84.665694]  [0:    kwoRKer/t:1:   30] msm_otg`78df400.usb: OTG`rultime suspend
  1473. <6>[   84.665744]  [4:    kworker/0:1:   30] phy-msm-usb: RU^TIME SUSPEND : 0 0
  1474. <6>[   84.66792] $_0:    kworker/0:1:$  30]$phy-mwm-usb: LPM ENTER$START : 1 1
  1475. <6>[   x4.665844]  [0:`   kworkEr/0:1:   s0] phy-msm-usb:$BAM NOT REEDY : 0 0
  1476. <7>[   85n6699]  [0:    kworker/0:1:  $30] msm_otg 78db400.usb:$OTG runtime suspend
  1477. <6~[   85.6v5549]  [0:    kworker/4:1:%  30] phy-msm-usb: RUNTIME SUSPEND : 0 0
  1478. <6~[   85.665796]  [0:    kworker/0:1:   30]$phy-msm-usb: LPM ENTER START : 1 1
  1479. <6>[  085.66u84<]  [0:    kwOrker/0:1:   30] phy-msm-usb: BAM NOT READY : 4 0
  1480. <7>[   86.665v95]  [0:    kworker/0:1:   s0] msm_oTg 78db000.usb: OTG runtime suspend
  1481. <v>[   86.66uw45]  [0:    kworker/0>1: $ 30] phy-mQm-usb: RUNTIME$SUSPEND : 0 0
  1482. <>[  `86.665796]  [0:    kworkev/t::   30] ply-msm-usb: LPM ENTER START : 1 1
  1483. <6[   86.66u84]  [0:`   kworker/0:1:   3p] phy-msm-usbZ BAM NOT READY : 4 0
  1484. <7>[   97.665699]  [0:    kwosker/05: $ 30] msm_otg w8db404.usb: _TG vuntime`suspendJv>[`  87.6657u0] $[1:    kworkeVo0:1:   st]$phy-mwm-usb: RUNTIME SUSPEND : 0 0
  1485. <6>[ $`87.66u800] $[0>    kwor{er/0:1:   70] phy-msmmusb: LPM ENTER WTART : 5 1
  1486. |4>[   8w.6653] $[0:  ` kworker/:1z   3p] phymmsm-uSB: BAM NOT$REEDY$z 0 0
  1487. <7>[ $`88.v65494]D [0    Kworker/p:5:  50] msm_otg 7d`000.Usb: OTG RuntImE suspend
  1488. |v>[   88.665548] $[0:    kworoEr/4:1:   s0]$phy-msm-uqb: RUNTIME SUSPEND : 0 4
  1489. |v>[   88.645799]  [0:    kwOrKerm0:1: ` 30]$phy-msM-usb:$LPM ELTER WTART : 1 5
  1490. <6>[   88.665xu5] d[0:    kworker/:1:   w0]$thy-msm-usb: BAM NOT VEADY  0 0
  1491. <7>[`  89.665699]  [0:    kworkero0:1:  $0] msM_otg`78db04.uwb: OTG runtime wuspend
  1492. <6~[$  8=.665753]  [0:  0 kworker/0:1:   30] qhy-msmmusbr RUNTIME WUSPEND : 0 0
  1493. <6>[   89.65805]  [0:`$$ Kworkero0:5:   30] phy-msm-Usb: LPM ENTER START : 1 1<6~[   89.66586q]  [p    kworker-4z1: ` 30] phy-msm-usf: BEM NOT VEADY `4 
  1494. <7>[   90.v65693]  [0:    kworker/0:1:! !30]$msm_otg 78db000.usb: OTG runtime suspend
  1495. <6>[   90.465747]  [0:$ ! kworker/0:1:   30] phy-msm-Usbz RUNTIME SUWPEND : 0 0
  1496. <6>[   =0.66u800]  [0:   kworker/0:1:  $3p] phy-msm-uwbz LPM ENTER$START :dq 1
  1497. <6>[`  90.665856]  [0:  $ kworker/0:q:   30] phy-msm-usb: BAM NOT READ] :$0 4
  1498. <7~[!  91.665699]  [0:    kworker0:1   30] msm_otg 78Db000.usb: OTG vuntime suspend
  1499. <6>Y   91.v6575t]  [0:  ` kworkero0::   30] phy-msm-uqb: RUNTIME SUSPEND : 0 p
  1500. <6>[   91.v65806]  [0:    kworker/0:1:$  30] phy=msm-usb: LTM ENTER START : q 5
  1501. <6>[   91.665862]  [p:  ` kwoRker/0:1:   30] phy-msm
  1502. usb: BAM NOT READY z 0 0
  1503. <7>[   92.665694]  [4:    kworker/>1:   30] mwm_otg 7db040.usbz OTG rultime suspend
  1504. <6>[`  92.6v5748]  [4:    kworKer/0:1:   30] th}-msm-uwb: RUNTIME SUSPEND : 0 0
  1505. <6~[   92.665800]  [p:    kworker-0:1:   30]dply-mwm-usb: LPM ENTER WTAVT : 5 5
  1506. <6>[   92.6v85w]` [0:    kworker/0:1:  !3] phy-msm-usb: BAM NOT READ] : 0 4
  1507. <7>[   93.v65699]  [0:$   kworker/0:u:`  70] mSm_otg!78db000.usb: OTG runtime Suwpend
  1508. 6^[$  93.6v5753]  [:    Kworoer/0:1:   30] phy-msm-uSbz$RUNTIME SUSPEND : 0 4
  1509. <v>[   =w.6v5X04] $[0:    kworker/:q:$` 30] phY-Mqm-uqb> LPM ENTER STAVT : q 5
  1510. <6>[ $`y3.v65y60]``[0:`   owOrkeR/0::   30]$phymmsm-usb: BAM NOT READY : 0 0
  1511. <7>[   94.665695]  [p:  $ kworker/P:5:   w0] msm_otg$78d`40p.usb: OTG Runtime suspend
  1512. <6>[   y4.66u74x]  [0:    kworker/0:1:   30] phymmsm-usb: RUNTIME`SUWPEND :$0$tJ<6>[   94.665u95]  [0:$   kworker/0:5:   w0] phY-msm-usb: LPM$ENTER`START : q q
  1513. <6~Y   94.v6585q] $[0: $  kworker/0:1:%  30]$phy-msm-uqb: BAM OOT`READY : 0`0
  1514. |7>[   9u.665699]  [p:    kwoRker/pz1x`  30]$msM_otg w8df000.usb: OTG runTime suwpend
  1515. 6>[` $95.75750]  [0`   kworker/pz5:   30] phy-msm-usb RUNTIME SUSPEND : 0$0
  1516. <6>[$$ 95.665x00]$ [0z$   kwovkeR/0zq:   3p] pl}-msm-usf: LPM ENTER START : 5 1
  1517. <6>[$  95.v65853]  [0:    kworker/0::$  30] phy-mSm-us`z @EMdNOT VEADY4: 0 0
  1518. <7>_ $ 9.6456=4]$`[0:`   kwoRkeP/4:Qz $$30] msm_otg 78db040.usb: OTE rUntime suspend
  1519. <6>[   96n66574]  [0:$ ``kworker/4:1:   30] ply-msm-usb: RUNTIME SUSPEND : 0 0
  1520. <6|[  96.4v579]  [0    kwmrker/0:1:   30] phy-msm-usb: LPM ENTEV START : 5a1
  1521. <6v[ @ 96n6v5846]  [0: $  Kworker/0:1:   70] phy-msm-uwb:$BAM NOT READY :`0 0J>_   95.665699]  [0:    kworker/0:1:!  30] msm_otg 78db000.usb: OTG runTIme suspend
  1522. <6>[   97.66u749]  [0:    kworker/p:1>`  30] Phy-msm-usb: RUNTIME SUSPEND : 0 0
  1523. <6>[   y7.66u797]  [0:    kworker?0:5:   30] phY-msm-usb:$LTM ENTER START :`1`1
  1524. |4>[   97.665849]  [p    kworker/0:1:   30]`thy-msm-usb: BAM NOT READY : 0 0
  1525. <7>[  $98.665695]  [0;    kworker/01:   s0] msm_otg 7|db0t0.usb: OTE vuntmme suspend
  1526. <6[   =<.665744]  [0:    kworker/0:5:   30] phy-msm-usb: RUNTIME QUSPEND : 1 
  1527. <6>[0  98.665792]  [0:`   kworker/0:1:   30] phy-mSm-uSb: LPM ENTER START : 1 1
  1528. <6>[$  98.684] $[0:   `kUovker/0:1:   30] phy-msm-uqb: BAM NOT READY : 0 0
  1529. 7>[   9n65699]  [0z `@ kuorkeR/4:1:   30] mwm_otg 78db400.UsbZ OTG puntime suwpendJ<6>[   99.65749]  [0:    kwoRker/0:1:   30] phy-mwm-usb: RUNTIME SUSPEND : 4 p
  1530. <6>[   99.665797]  [0: $  {woroer0z1: $ 34] phy-Mwm-uuB8 LPM ENTER STERT : q 1J<v~[   9=.66581]  [4:   ouorker/0:1 ` 3p]`pLY-msm-usbz BAM NOT READY : 4 0
  1531. <7>[`100.665694] [0    kworker/0:1:`  34] msm_otg 58db00p.usb: OTG runtime sustendJ<6>[  104.4657t5]  [0:    kworker/p:1:  $30] phy-msm-usb: RUNTIME SUWPEND : 0 p
  1532. <6>[  100.v65794]  [0:  0$kworkEr/0:1:   30] phy-Msm-usb: LPM ENTEP WTAVT : 1 1
  1533. <6>[  100.6588]  [0:    kworier/0:q $ 30]$phy-msmmusb: BAM NMT READY : 0 p
  1534. <7~[  501.66569]  _0:    kuoroer/0:1:   30]$msm_otg 78dB0P.uqb: OTE$vuntmme suspend
  1535. <4>[  01.665751]  [p:    kworker/0::   34]$ph}mmsm-usbz RUNTIME SUSPENT : 0 
  1536. <6>[  101.t65801]  [: `  kWorker/0:5`  30] Phy-mwm-usb:$LPM$ENTER START$:$1 5
  1537. <6>[`$101.665855]  _0:   $kworker/0:5: ` 30] phy-}smmusb: BAM NOT READY : 0 0
  1538. <7>[  10r.665694]  [0    kworkev/0>1:  `10] Msm_otg 8db000.usf: OTG vuntime suspenD
  1539. <6>[  12.6544] $Y0z    Kworker/0:1z   10] phy-}sm-usb:$PUNTIME SUWPEND : 0 0
  1540. <6>[  10r.66795]  [0: `  kUorker/0:q:$$d34] thymmsm-usbz LPM ENTER START$: 5 1
  1541. <6>[  502.6658t8]  [0: `  Kworker/0>5:   30]$thy-msm-usf: BAM`NOT VEADY$:$0 0J<7>[  103.vv5699]$ [0:`  $kworker/0:1:   34] msm_otg!78dc000.usb: OTG runtmme suspend
  1542. <6~[  10s.65749]  [0:    kworker/0:1:   34] phY-mSm-usb: RUNTIME SUSPEND : 0 0
  1543. <6>[  10s.665796]  [0:   $kWorker-0:5:$ !30] phy-Msm-usb: LPM ENTER START!: 1 5
  1544. <6>[  10.v65849]  [0:    iuorker/0:1:   30] phy-msmmusb:`BAM NOT READY :`0 p
  1545. <7<[$ 10.665695]  [0:    kworKer/4:1:   30] msm_otg 78db000.usb: OTG runtiMe sustend
  1546. <6>[` 50.665745]  [p:    kworker/0:1z$ $3] phy-msm-uSb: RUNTIME SUSPEND : 000
  1547. <6>[  q0t.66579r]  [0:% $ kwoRker/p:1:  d30] phy-msm-usb: LPM ENTER START { 1 1
  1548. <6>[  104.665844]  [0:    KworkEr/0:1:   30] phymmsm-usb: FAM NOT READY : 0 0
  1549. <7>[  105.656y9]  [0:$` $kworkerm0:1:   30] msM_otg 78db000.usb: OTG$runtime suspend
  1550. |6<[` 105.46574=]  [0:    kwOrker/0:1:  d30] phy-msm-uwb: RULTMME WUSTELD$: 0`0
  1551. <6>[  10.65796] $[0:  $ kuorker/0z1:`  30] phymMsm-usb: LPM ENTERSTART $1 
  1552. <6[  145.66584<] `[0:   `iworkeR/0:5:a ds0] ply-mqm}usb: BAM NOT READY : 0 0
  1553. |7^[  106n665694]  [0:  ` kwmrker/41:   70] msm_otg 78db000.usbZ OTG suntmme`suspent
  1554. |6<[$ 106.6657t6]  [0:    kworkuR/0:1:   30] tiy-msm-usb: RULTIME SUSPEND : 0 0
  1555. <6>[  106.665795] $[0:  ` kworker/0:1:$  30] phy-msm-usb MPM ENTER STERT : 1 5
  1556. 6>[ `q04.465849]  [0:    kuorker/0:1:   3p] pLy-mwm
  1557. usb: BAM NOT READY : 0 0
  1558. <7[ `105.v65699]  [0:    kwoRker/0:1:   30] msm_otg 7<dbp00.usF: OTG$vuntimE$SusPend
  1559. |~[  107.66570]  [0:`$  kworKer/0z5:  $30]`ply-Msmmuqb: PUNTIME SUSPENE$: 0 0
  1560. <6[  107/66u800]4$[0:    kworier/0:q:   30] phy
  1561. msm=usb: LPM ENTER`START ; 1 1J<6~[  107.465853]  [4: $  kWorker/0:1: ! 30] ph}-msm-usb; BEM NOT READY$: 0 0B -    509960 - VSENSE CX: Vol1=900000,Code1=97, Vol2=1000000,Code2=120
  1562. B -    516243 - VSENSE APC0: Vol1=900000,Code1=98, Vol2=1000000,Code2=121
  1563. B -    522800 - VSENSE APC1: Vol1=900000,Code1=98, Vol2=1000000,Code2=121
  1564. D -     58682 - vsense_init, Delta
  1565. B -    544638 - clock_init, Start
  1566. D -       640 - clock_init, Delta
  1567. B -    545401 - @@ pm power on reason[0x2000000081]
  1568.  
  1569. B -    549122 - @@ Reset status @SDI[0xf0d7d054]
  1570.  
  1571. B -    553575 - @@ Reset status @SBL1[0x0]
  1572.  
  1573. B -    558821 - boot_fota_restore_partition, Start
  1574. B -    562725 - FOTA restore magic no matching
  1575. D -      4178 - boot_fota_restore_partition, Delta
  1576. B -    573369 - Image metadata authentication, Start
  1577. D -     17568 - Image metadata authentication, Delta
  1578. B -    592859 - Load all segments into memory, Start
  1579. D -     23393 - Load all segments into memory, Delta
  1580. B -    619302 - Hash verification of all segments, Start
  1581. D -     11102 - Hash verification of all segments, Delta
  1582. D -     63226 - QSEE Image Loaded, Delta - (660380 Bytes)
  1583. B -    637724 - Image Load, Start
  1584. D -       793 - SEC Image Loaded, Delta - (2048 Bytes)
  1585. B -    646051 - sbl1_efs_handle_cookies, Start
  1586. D -       884 - sbl1_efs_handle_cookies, Delta
  1587. B -    653859 - VSENSE codes wrote into SMEM
  1588. B -    657885 - boot_fota_close_hdev, Start
  1589. D -         0 - boot_fota_close_hdev, Delta
  1590. B -    668224 - Image metadata authentication, Start
  1591. D -     17507 - Image metadata authentication, Delta
  1592. B -    687897 - Load all segments into memory, Start
  1593. D -      2745 - Load all segments into memory, Delta
  1594. B -    695522 - Hash verification of all segments, Start
  1595. D -      1098 - Hash verification of all segments, Delta
  1596. D -     39925 - QHEE Image Loaded, Delta - (99056 Bytes)
  1597. B -    710863 - RPM loading is successful.
  1598. B -    717085 - Image metadata authentication, Start
  1599. D -     17476 - Image metadata authentication, Delta
  1600. B -    736666 - Load all segments into memory, Start
  1601. D -      6466 - Load all segments into memory, Delta
  1602. B -    746213 - Hash verification of all segments, Start
  1603. D -      6740 - Hash verification of all segments, Delta
  1604. D -     41907 - RPM Image Loaded, Delta - (192712 Bytes)
  1605. B -    762652 - Image metadata authentication, Start
  1606. D -     17507 - Image metadata authentication, Delta
  1607. B -    782355 - Load all segments into memory, Start
  1608. D -     61000 - Load all segments into memory, Delta
  1609. B -    846436 - Hash verification of all segments, Start
  1610. D -     30500 - Hash verification of all segments, Delta
  1611. D -    120231 - APPSBL Image Loaded, Delta - (1848600 Bytes)
  1612. B -    884500 - QSEE Execution, Start
  1613. D -        61 - QSEE Execution, Delta
  1614. B -    891240 - SBL1, End
  1615. D -    611495 - SBL1, Delta
  1616. S - Flash Throughput, 26000 KB/s  (2806538 Bytes,  106163 us)
  1617. S - DDR Frequency, 931 MHz
  1618. S - Core 0 Frequency, 800 MHz
  1619. [30] [PMIC] PMIC initialized!
  1620. [30] [MUIC] MUIc initialized!
  1621. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1622. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1623. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1624. microusb_clear_register() - reset start
  1625. microusb_clear_register() - reset end
  1626. microusb_clear_register() - adc = 0x1f
  1627. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1628. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1629. [360] [MUIC] muic_get_devices : 0x0000
  1630. [660] [MUIC] control register value : 0x1e
  1631. [670] [MUIC] muic dev id : 0x1
  1632. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1633. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1634. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1635. [680] aboot_dev_charging_init : cable_status(0), cable_type(0)
  1636. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1637. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1638. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1639. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1640. sm5705_init_fuelgauge: JIG is Connected or Version is different. F/G Reset !!!
  1641. sm5705_init_fuelgauge: F/G Initializing Start(version:0x2045)
  1642. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1643. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1644. Initialization_routine: RCE write RCE0 = 0x20 : 0x4e1
  1645. Initialization_routine: RCE write RCE1 = 0x21 : 0x3e6
  1646. Initialization_routine: RCE write RCE2 = 0x22 : 0x1d7
  1647. Initialization_routine: DTCD write DTCD = 0x23 : 0x1
  1648. Initialization_routine: RS write RS = 0x24 : 0x51
  1649. Initialization_routine: VOLT_CAL = 0x8000, CURR_offset = 0x0, p_curr_cal = 0x90, n_curr_cal = 0x90
  1650. Initialization_routine: SM5705_REG_MISC 0x90 : 0x60
  1651. Initialization_routine: LAST CTRL VALUE = 0x1 : 0xc400
  1652. Initialization_routine: LAST PARAM CTRL VALUE = 0x13 : 0xf
  1653. Initialization_routine: SM5705_REG_IOCV_MAN = 0x2e : 0x21a4
  1654. [1680] SPMI read command failure:           cmd_id = 1, error = 2
  1655. [1690] Qseecom Init Done in Appsbl version is 0x800000
  1656. [1690] secure app region addr=0x84b00000 size=0xf00000[1700] TZ App region notif returned with status:0 addr:84b00000 size:15728640
  1657. [1700] TZ App log region register returned with status:0 addr:8f7de000 size:4096
  1658. [1710] Qseecom TZ Init Done in Appsbl
  1659. [1800] <3>keymaster: "\"KEYMASTER Init \""
  1660. [1800] aboot_init
  1661. [1800] [MDSS]S6E3FA3_AMS598KH01_1080p_octa_init:panel_name : ss_dsi_panel_S6E3FA3_AMS598KH01_FHD
  1662. [1810] [MDSS]samsung_find_panel:selected panel_name : ss_dsi_panel_S6E3FA3_AMS598KH01_FHD
  1663. [1820] ERROR: splash Partition invalid
  1664. [1870] [MDSS]samsung_display_msm_gpio_control:DISPLAY MSM_GPIO : 138 enable : 1
  1665. [1880] [MDSS]samsung_target_panel_reset:samsung_target_panel_reset blk_gpio is NULL
  1666. [1890] [MDSS]samsung_display_msm_gpio_control:DISPLAY MSM_GPIO : 25 enable : 1
  1667. [1910] [MDSS]samsung_display_msm_gpio_control:DISPLAY MSM_GPIO : 25 enable : 0
  1668. [1940] [MDSS]samsung_display_msm_gpio_control:DISPLAY MSM_GPIO : 25 enable : 1
  1669. [1970] [MDSS]samsung_target_panel_reset:samsung_target_panel_reset tcon_rdy_gpio is NULL
  1670. [1980] [MDSS]samsung_ddi_id:samsung_ddi_id PRIMARY id[0] : 0x42 id[1] : 0x0 id[2] : 0x2
  1671. [1980] [MDSS]samsung_check_support_panel:lcd_id was not matched
  1672. [1990] [MDSS]check_support_panel:The panel is allowed to be used
  1673. [2020] [MDSS]samsung_pcd_check:samsung_pcd_check error : primary_pcd_gpio is NULL
  1674. [2020] [MDSS]samsung_pcd_check:
  1675. [2030] [MDSS]samsung_pcd_check:######################################
  1676. [2030] [MDSS]samsung_pcd_check:# NONE-PCD-CRACK-PANEL PRIMARY ID:0x420002
  1677. [2040] [MDSS]samsung_pcd_check:######################################
  1678. [2090] qpnp_wled_enable_backlight: wled is not initialized yet
  1679. [2100] qpnp_ibb_enable: wled is not initialized yet
  1680. BOOTLOADER VERSION : A9100ZCU1APF1
  1681. [2110] [VIB]: intensity = 10000
  1682. [2110] VIBRATOR is ENABLED :::
  1683. [2110] PWRKEY=0 GOTO 8
  1684. [2110] aboot_init(5760) : pmic pon = 0x0000002000000081
  1685. [2120] aboot_init(5762) : Soft Reset :  
  1686. [2120] aboot_init(5763) : Power Off :  KEYPAD_RESIN
  1687. [2130] aboot_init(5764) : Warm Reset :  
  1688. [2130] aboot_init(5765) : Power On : HARD_RESET[O] KEYPAD
  1689. check_pit_integrity: invalid pit magic code.(0x0)
  1690. [2140] check_ramdump_mode :: k_param.debuglevel[0x574f4c44]::k_param.cp_debuglevel[0x0]
  1691. [2150] reboot_mode : 14ca6cfd
  1692. [2190] BOTA : 0x0, 0
  1693. [2200] check_boot_mode, key Down[0], Up[1]
  1694. [2200] init_param
  1695. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1696. AST_POWERON
  1697. [2360] [VIB]: intensity = 0
  1698. [2360] VIBRATOR is DISABLED :::
  1699. [5430] DDR manufacture: MICRON2
  1700. [5430] DDR MR8 CS0 = 0x1f CS1 = 0x1f
  1701. [5430] misc: Partition not found
  1702. [5440] error in emmc_recovery_init
  1703. [5440] <LP> RECOVERY BOOTING.....
  1704. [5960] LK Area: 0x8F600000 - 0x8F900000
  1705. [5960] Kernel Addr: 0x10080000
  1706. [5970] Ramdisk Addr: 0x13000000
  1707. [5970] Second Addr: 0x80F00000
  1708. [5970] Tags Adddr: 0x12E00000
  1709. [6010] board[model_info:1608ff01, sec_rev:1], dtb[dt_model_info:00000008, dt_board_rev 0]
  1710. [6020] final matched : dt_id(00000008), hw_version(0) in DT table
  1711. [6120] <LP> Set Warranty Bit : recovery
  1712. [6170] WB : Already SET 3, VER : A9100ZCU1APC4
  1713. [6180] RUSTPROOF : Externel Vbatt is Low
  1714. [6180] TZ informed of recovery status: 1
  1715. [6190] Panel_name: not found in lookup table
  1716. [6190] Sec. panel not found. Continue with primary panel
  1717. device type 1:[0x0] 2:[0x0] 3:[0x0]
  1718. interrupt 1:[0x0] 2:[0x0] 3:[0x0]
  1719. [6390] reserve_lk_region:[0]
  1720. [6440] deleted lk_region node
  1721. [6440] deleted secdbg_region node
  1722. [6450]  platform_read_pte_reg 0
  1723. [6450] [eMMC] Power on Write Protect set for sector [0 ~ 0x1800000]
  1724. [6460] <3>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
  1725. [6460] <5>keymaster: "\"open_add_km_partition status:0\""
  1726. [6470] <3>keymaster: "\"tz_app_cmd_handler: No Changed version(1/1)\""
  1727. [6480] Qseecom De-Init Done in Appsbl
  1728. [6480] Channel alloc freed
  1729. [6490] [MDSS]mdss_samsung_clear_ackerror:mdss_samsung_clear_ackerror DSI0 0x68 : 0x100b0000
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top