API tools faq
paste
Advertisement
tieuvinhlong

Log android burning firmware - s905x-x96

tieuvinhlong
Mar 17th, 2017
393
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 10.07 KB | None | 0 0
raw download clone embed print report
  1. GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:800;USB:8;������GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ
  2. :0;CHK:AA;SD:0;READ:0;CHK:AA;USB:8;0.0;
  3. TE: 6302440
  4.  
  5. BL2 Built : 13:48:56, Sep 23 2016.
  6. gxl g7459bd4 - jianxin.pan@droid06
  7.  
  8. set vcck to 1120 mv
  9. set vddee to 1000 mv
  10. Board ID = 2
  11. CPU clk: 1200MHz
  12. BL2 USB
  13. DQS-corr enabled
  14. DDR scramble enabled
  15. DDR3 chl: Rank0+1 @ 912MHz - FAIL
  16. DDR3 chl: Rank0 @ 912MHz - PASS
  17. Rank0: 1024MB(auto)-2T-13
  18. 0.0;
  19. TE: 6547804
  20.  
  21. BL2 Built : 13:48:56, Sep 23 2016.
  22. gxl g7459bd4 - jianxin.pan@droid06
  23.  
  24. set vcck to 1120 mv
  25. set vddee to 1000 mv
  26. Board ID = 2
  27. CPU clk: 1200MHz
  28. BL2 USB
  29. 0.0;
  30. TE: 6597827
  31.  
  32. BL2 Built : 13:48:56, Sep 23 2016.
  33. gxl g7459bd4 - jianxin.pan@droid06
  34.  
  35. set vcck to 1120 mv
  36. set vddee to 1000 mv
  37. Board ID = 2
  38. CPU clk: 1200MHz
  39. BL2 USB
  40. Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000
  41. New fip structure!
  42. Load bl30 from USB, src: 0x00010000, des: 0x01100000, size: 0x0000d600
  43. Load bl31 from USB, src: 0x00020000, des: 0x10100000, size: 0x00015400
  44. Load bl33 from USB, src: 0x00038000, des: 0x01000000, size: 0x000a9800
  45. NOTICE:  BL3-1: v1.0(debug):2e39a99
  46. NOTICE:  BL3-1: Built : 16:36:21, Sep 20 2016
  47. aml log : bl31 normal boot !
  48. [Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 yan.wang@droid05]
  49. OPS=0x82
  50. 7d 4 62 93 b8 a8 93 5d 2b e1 48 58 [6.857969 Inits done]
  51. secure task start!
  52. high task start!
  53. low task start!
  54. INFO:    BL3-1: Initializing runtime services
  55. WARNING: No OPTEE provided by BL2 boot loader
  56. ERROR:   Error initializing runtime service opteed_fast
  57. INFO:    BL3-1: Preparing for EL3 exit to normal world
  58. INFO:    BL3-1: Next image address = 0x1000000
  59. INFO:    BL3-1: Next image spsr = 0x3c9
  60.  
  61.  
  62. U-Boot 2015.01-gda37878 (Oct 22 2016 - 12:04:03)
  63.  
  64. DRAM:  1 GiB
  65. Relocation Offset is: 36ec9000
  66. InUsbBurn
  67. [MSG]sof
  68. Set Addr 5
  69. Get DT cfg
  70. Get DT cfg
  71. Get DT cfg
  72. set CFG
  73.  
  74. ID[16]
  75. tplcmd[    echo 12345]
  76. 12345
  77. [MSG]ret = 0
  78. [info]success
  79. BULKcmd[    low_power]
  80. [info]success
  81.  
  82. ID[16]
  83. tplcmd[    download mem dtb normal 79872]
  84. [MSG]Down(mem) part(dtb) sz(0x13800) fmt(normal)
  85. [MSG]totalSlotNum = 0, nextWriteBackSlot 2
  86. [info]success
  87. [MSG]Burn Start...
  88. [MSG]load dt.img to 0x0000000001000000, sz=0x13800
  89. [MSG]Burn complete
  90. BULKcmd[download get_status]
  91. [info]success
  92. BULKcmd[disk_initial 1]
  93.       Amlogic multi-dtb tool
  94.       Multi dtb detected
  95.       Multi dtb tool version: v2 .
  96.       Support 2 dtbs.
  97.         aml_dt soc: gxl platform: p212 variant: 1g
  98.         dtb 0 soc: gxl   plat: p212   vari: 1g
  99.         dtb 1 soc: gxl   plat: p212   vari: 2g
  100.       Find match dtb: 0
  101. start dts,buffer=0000000007700000,dt_addr=0000000007700800
  102. parts: 11
  103. 00:      logo   0000000002000000 1
  104. 01:  recovery   0000000002000000 1
  105. 02:       rsv   0000000000800000 1
  106. 03:       tee   0000000000800000 1
  107. 04:     crypt   0000000002000000 1
  108. 05:      misc   0000000002000000 1
  109. 06: instaboot   0000000020000000 1
  110. 07:      boot   0000000002000000 1
  111. 08:    system   0000000040000000 1
  112. 09:     cache   0000000020000000 2
  113. 10:      data   ffffffffffffffff 4
  114. emmc/sd response timeout, cmd8, status=0x3ff2800
  115. emmc/sd response timeout, cmd55, status=0x3ff2800
  116. [mmc_init] mmc init success
  117. overide_emmc_partition_table: overide cache
  118. [mmc_get_partition_table] skip partition cache.
  119. Partition table get from SPL is :
  120.         name                        offset              size              flag
  121. ===================================================================================
  122.    0: bootloader                         0            400000                  0
  123.    1: reserved                     2400000           4000000                  0
  124.    2: cache                        6c00000          20000000                  2
  125.    3: env                         27400000            800000                  0
  126.    4: logo                        28400000           2000000                  1
  127.    5: recovery                    2ac00000           2000000                  1
  128.    6: rsv                         2d400000            800000                  1
  129.    7: tee                         2e400000            800000                  1
  130.    8: crypt                       2f400000           2000000                  1
  131.    9: misc                        31c00000           2000000                  1
  132.   10: instaboot                   34400000          20000000                  1
  133.   11: boot                        54c00000           2000000                  1
  134.   12: system                      57400000          40000000                  1
  135.   13: data                        97c00000         13a400000                  4
  136. mmc read lba=0x12000, blocks=0x2
  137. mmc read lba=0x12002, blocks=0x2
  138. mmc_read_partition_tbl: mmc read partition ERROR!
  139. mmc write lba=0x12000, blocks=0x2
  140. mmc write lba=0x12002, blocks=0x2
  141. mmc_write_partition_tbl: mmc write partition OK!
  142. eMMC/TSD partition table have been checked OK!
  143. XXXXXXX======enter EMMC boot======XXXXXX
  144. emmc/sd response timeout, cmd8, status=0x3ff2800
  145. emmc/sd response timeout, cmd55, status=0x3ff2800
  146. [mmc_init] mmc init success
  147. switch to partitions #0, OK
  148. mmc1(part 0) is current device
  149. Device: SDIO Port C
  150. Manufacturer ID: 15
  151. OEM: 100
  152. Name: 8WPD3
  153. Tran Speed: 52000000
  154. Rd Block Len: 512
  155. MMC version 5.0
  156. High Capacity: Yes
  157. Capacity: 7.3 GiB
  158. mmc clock: 40000000
  159. Bus Width: 8-bit
  160. [store]amlmmc erase 1emmckey_is_protected : protect
  161.  start = 0,end = 57343
  162.  
  163.  
  164. Caution! Your devices Erase group is 0x400
  165. The erase range would be change to 0x36000~0xe8ffff
  166.  
  167. start = 221184,end = 15269886
  168. start erase dtb......
  169. start = 81920,end = 82943
  170. dev # 1,  , several blocks erased OK
  171. [store]To run cmd[emmc dtb_write 0x0000000001000000 0x40000]
  172. write emmc dtb
  173. overide_emmc_partition_table: overide cache
  174. [mmc_get_partition_table] skip partition cache.
  175. Partition table get from SPL is :
  176.         name                        offset              size              flag
  177. ===================================================================================
  178.    0: bootloader                         0            400000                  0
  179.    1: reserved                     2400000           4000000                  0
  180.    2: cache                        6c00000          20000000                  2
  181.    3: env                         27400000            800000                  0
  182.    4: logo                        28400000           2000000                  1
  183.    5: recovery                    2ac00000           2000000                  1
  184.    6: rsv                         2d400000            800000                  1
  185.    7: tee                         2e400000            800000                  1
  186.    8: crypt                       2f400000           2000000                  1
  187.    9: misc                        31c00000           2000000                  1
  188.   10: instaboot                   34400000          20000000                  1
  189.   11: boot                        54c00000           2000000                  1
  190.   12: system                      57400000          40000000                  1
  191.   13: data                        97c00000         13a400000                  4
  192. mmc read lba=0x12000, blocks=0x2
  193. mmc read lba=0x12002, blocks=0x2
  194. mmc_read_partition_tbl: mmc read partition OK!
  195.  partition table success
  196. [MSG]usb producing env_relocate
  197. mmc env offset: 0x27400000
  198. *** Warning - bad CRC, using default environment
  199.  
  200. Saving Environment to aml-storage...
  201. mmc env offset: 0x27400000
  202. Writing to MMC(1)... done
  203. [MSG]MMC init in usb
  204. aml_priv->desc_buf = 0x0000000033ec9640
  205. aml_priv->desc_buf = 0x0000000033ecb960
  206. SDIO Port B: 0, SDIO Port C: 1
  207.       Amlogic multi-dtb tool
  208.       Multi dtb detected
  209.       Multi dtb tool version: v2 .
  210.       Support 2 dtbs.
  211.         aml_dt soc: gxl platform: p212 variant: 1g
  212.         dtb 0 soc: gxl   plat: p212   vari: 1g
  213.         dtb 1 soc: gxl   plat: p212   vari: 2g
  214.       Find match dtb: 0
  215. [info]success
  216.  
  217. ID[16]
  218. tplcmd[download store boot normal 8419328]
  219. [MSG]flash LOGIC partCap 0x2000000B
  220. [MSG]Down(store) part(boot) sz(0x807800) fmt(normal)
  221. [MSG]totalSlotNum = 0, nextWriteBackSlot 1
  222. [info]success
  223. [MSG]Burn Start...
  224. [MSG]Burn complete
  225. BULKcmd[download get_status]
  226. [info]success
  227. BULKcmd[verify sha1sum e0ab0882039ba5836de4d5283712b5d4923665f8]
  228. [MSG]Verify Start...
  229. [MSG]To verify part boot in fmt normal
  230. [MSG]Verify End
  231. [MSG]VERIFY OK
  232. [info]success
  233.  
  234. ID[16]
  235. tplcmd[download store logo normal 1084896]
  236. [MSG]flash LOGIC partCap 0x2000000B
  237. [MSG]Down(store) part(logo) sz(0x108de0) fmt(normal)
  238. [MSG]totalSlotNum = 0, nextWriteBackSlot 1
  239. [info]success
  240. [MSG]Burn Start...
  241. [MSG]Burn complete
  242. BULKcmd[download get_status]
  243. [info]success
  244. BULKcmd[verify sha1sum 92fee20c6a13897c65873726c6a93b8f6b435d9b]
  245. [MSG]Verify Start...
  246. [MSG]To verify part logo in fmt normal
  247. [MSG]Verify End
  248. [MSG]VERIFY OK
  249. [info]success
  250.  
  251. ID[16]
  252. tplcmd[download store recovery normal 11350016]
  253. [MSG]flash LOGIC partCap 0x2000000B
  254. [MSG]Down(store) part(recovery) sz(0xad3000) fmt(normal)
  255. [MSG]totalSlotNum = 0, nextWriteBackSlot 1
  256. [info]success
  257. [MSG]Burn Start...
  258. [MSG]Burn complete
  259. BULKcmd[download get_status]
  260. [info]success
  261. BULKcmd[verify sha1sum 150c07fd9382498e580b788ab9a8a3b6e57dfd1b]
  262. [MSG]Verify Start...
  263. [MSG]To verify part recovery in fmt normal
  264. [MSG]Verify End
  265. [MSG]VERIFY OK
  266. [info]success
  267.  
  268. ID[16]
  269. tplcmd[download store bootloader normal 933888]
  270. [MSG]Down(store) part(bootloader) sz(0xe4000) fmt(normal)
  271. [MSG]totalSlotNum = 0, nextWriteBackSlot 15
  272. [info]success
  273. [MSG]Burn Start...
  274. mmc switch to boot0 success
  275. mmc switch to boot1 success
  276. mmc switch to user success
  277. [MSG]align bootloader sz from 0xe4000 to 0x100000
  278. [MSG]Burn complete
  279. BULKcmd[download get_status]
  280. [info]success
  281. BULKcmd[verify sha1sum 55e98a0a48f7e3e0931028de61981ae969149608]
  282. mmc switch to boot0 success
  283. mmc switch to boot1 success
  284. mmc switch to user success
  285. [MSG]VERIFY OK
  286. [info]success
  287. BULKcmd[save_setting]
  288. ## save_setting ##
  289. [MSG]Set upgrade_step to 2
  290. Saving Environment to aml-storage...
  291. mmc env offset: 0x27400000
  292. Writing to MMC(1)... done
  293. [info]success
  294. BULKcmd[burn_complete 3]
  295. [MSG]Pls un-plug USB line to poweroff
  296. [info]success
  297.  
  298. CTRL-A Z for hel
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!