API tools faq
paste
Guest User

Untitled

a guest
Sep 24th, 2020
248
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.93 KB | None | 0 0
raw download clone embed print report
  1. [root@SEMO-IS-ME-04 ~]# smartctl -a -d cciss,0 /dev/sg0
  2. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.19.1.el7.x86_64] (local build)
  3. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: WD3000FYYX
  7. Serial Number: WCC132ZS44HK
  8. LU WWN Device Id: 5 0014ee 260ffdb29
  9. Add. Product Id: DELL(tm)
  10. Firmware Version: 00.0D1K4
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: Not in smartctl database [for details use: -P showall]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 6
  17. SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is: Thu Sep 24 15:02:36 2020 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART Status not supported: Incomplete response, ATA output registers missing
  24. SMART overall-health self-assessment test result: PASSED
  25. Warning: This result is based on an Attribute check.
  26.  
  27. General SMART Values:
  28. Offline data collection status: (0x82) Offline data collection activity
  29. was completed without error.
  30. Auto Offline Data Collection: Enabled.
  31. Self-test execution status: ( 0) The previous self-test routine completed
  32. without error or no self-test has ever
  33. been run.
  34. Total time to complete Offline
  35. data collection: ( 90) seconds.
  36. Offline data collection
  37. capabilities: (0x7b) SMART execute Offline immediate.
  38. Auto Offline data collection on/off support.
  39. Suspend Offline collection upon new
  40. command.
  41. Offline surface scan supported.
  42. Self-test supported.
  43. Conveyance Self-test supported.
  44. Selective Self-test supported.
  45. SMART capabilities: (0x0003) Saves SMART data before entering
  46. power-saving mode.
  47. Supports SMART auto save timer.
  48. Error logging capability: (0x01) Error logging supported.
  49. General Purpose Logging supported.
  50. Short self-test routine
  51. recommended polling time: ( 2) minutes.
  52. Extended self-test routine
  53. recommended polling time: ( 385) minutes.
  54. Conveyance self-test routine
  55. recommended polling time: ( 5) minutes.
  56. SCT capabilities: (0x70bd) SCT Status supported.
  57. SCT Error Recovery Control supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  64. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  65. 3 Spin_Up_Time 0x0027 228 227 021 Pre-fail Always - 7600
  66. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 399
  67. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  68. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  69. 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 14521
  70. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  71. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  72. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 399
  73. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 389
  75. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6654
  76. 194 Temperature_Celsius 0x0022 119 107 000 Old_age Always - 33 (Min/Max 0/45)
  77. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  78. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  81. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  82. 241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 563672723199
  83. 242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 337845417304
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 94 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 94 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 04 51 00 00 00 00 00
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. b4 00 00 00 00 00 00 00 07:10:50.035 SANITIZE DEVICE
  113. ec 00 01 00 00 00 00 00 07:10:50.019 IDENTIFY DEVICE
  114. ec 00 00 00 00 00 00 00 07:10:49.988 IDENTIFY DEVICE
  115. ec 00 00 00 00 00 00 00 07:10:49.987 IDENTIFY DEVICE
  116.  
  117. Error 93 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 04 51 00 00 00 00 00
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. b4 00 00 00 00 00 00 00 07:10:49.597 SANITIZE DEVICE
  129. ec 00 01 00 00 00 00 00 07:10:49.582 IDENTIFY DEVICE
  130. ec 00 00 00 00 00 00 00 07:10:49.550 IDENTIFY DEVICE
  131. ec 00 00 00 00 00 00 00 07:10:49.549 IDENTIFY DEVICE
  132.  
  133. Error 92 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  134. When the command that caused the error occurred, the device was active or idle.
  135.  
  136. After command completion occurred, registers were:
  137. ER ST SC SN CL CH DH
  138. -- -- -- -- -- -- --
  139. 04 51 00 00 00 00 00
  140.  
  141. Commands leading to the command that caused the error were:
  142. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  143. -- -- -- -- -- -- -- -- ---------------- --------------------
  144. b4 00 00 00 00 00 00 00 07:10:49.101 SANITIZE DEVICE
  145. ec 00 01 00 00 00 00 00 07:10:49.086 IDENTIFY DEVICE
  146. ec 00 00 00 00 00 00 00 07:10:49.055 IDENTIFY DEVICE
  147.  
  148. Error 91 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 04 51 00 00 00 00 00
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. b4 00 00 00 00 00 00 00 07:10:48.694 SANITIZE DEVICE
  160. ec 00 01 00 00 00 00 00 07:10:48.679 IDENTIFY DEVICE
  161. ec 00 00 00 00 00 00 00 07:10:48.649 IDENTIFY DEVICE
  162. ec 00 00 00 00 00 00 00 07:10:48.648 IDENTIFY DEVICE
  163.  
  164. Error 90 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 04 51 00 00 00 00 00
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. b4 00 00 00 00 00 00 00 07:10:48.285 SANITIZE DEVICE
  176. ec 00 01 00 00 00 00 00 07:10:48.270 IDENTIFY DEVICE
  177. ec 00 00 00 00 00 00 00 07:10:48.246 IDENTIFY DEVICE
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  181. # 1 Short offline Completed without error 00% 3965 -
  182. # 2 Short offline Completed without error 00% 3835 -
  183. # 3 Short offline Completed without error 00% 2597 -
  184. # 4 Short offline Completed without error 00% 1162 -
  185. # 5 Short offline Completed without error 00% 23 -
  186. # 6 Short offline Completed without error 00% 3 -
  187. # 7 Vendor (0xdf) Completed without error 00% 3 -
  188. # 8 Short offline Completed without error 00% 1 -
  189.  
  190. SMART Selective self-test log data structure revision number 1
  191. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  192. 1 0 0 Not_testing
  193. 2 0 0 Not_testing
  194. 3 0 0 Not_testing
  195. 4 0 0 Not_testing
  196. 5 0 0 Not_testing
  197. Selective self-test flags (0x0):
  198. After scanning selected spans, do NOT read-scan remainder of disk.
  199. If Selective self-test is pending on power-up, resume after 0 minute delay.
  200.  
  201. [root@SEMO-IS-ME-04 ~]# smartctl -a -d cciss,0 /dev/sg1
  202. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.19.1.el7.x86_64] (local build)
  203. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  204.  
  205. === START OF INFORMATION SECTION ===
  206. Device Model: WD3000FYYX
  207. Serial Number: WCC132ZS44HK
  208. LU WWN Device Id: 5 0014ee 260ffdb29
  209. Add. Product Id: DELL(tm)
  210. Firmware Version: 00.0D1K4
  211. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  212. Sector Size: 512 bytes logical/physical
  213. Rotation Rate: 7200 rpm
  214. Form Factor: 3.5 inches
  215. Device is: Not in smartctl database [for details use: -P showall]
  216. ATA Version is: ATA8-ACS T13/1699-D revision 6
  217. SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
  218. Local Time is: Thu Sep 24 15:04:22 2020 CEST
  219. SMART support is: Available - device has SMART capability.
  220. SMART support is: Enabled
  221.  
  222. === START OF READ SMART DATA SECTION ===
  223. SMART Status not supported: Incomplete response, ATA output registers missing
  224. SMART overall-health self-assessment test result: PASSED
  225. Warning: This result is based on an Attribute check.
  226.  
  227. General SMART Values:
  228. Offline data collection status: (0x82) Offline data collection activity
  229. was completed without error.
  230. Auto Offline Data Collection: Enabled.
  231. Self-test execution status: ( 0) The previous self-test routine completed
  232. without error or no self-test has ever
  233. been run.
  234. Total time to complete Offline
  235. data collection: ( 90) seconds.
  236. Offline data collection
  237. capabilities: (0x7b) SMART execute Offline immediate.
  238. Auto Offline data collection on/off support.
  239. Suspend Offline collection upon new
  240. command.
  241. Offline surface scan supported.
  242. Self-test supported.
  243. Conveyance Self-test supported.
  244. Selective Self-test supported.
  245. SMART capabilities: (0x0003) Saves SMART data before entering
  246. power-saving mode.
  247. Supports SMART auto save timer.
  248. Error logging capability: (0x01) Error logging supported.
  249. General Purpose Logging supported.
  250. Short self-test routine
  251. recommended polling time: ( 2) minutes.
  252. Extended self-test routine
  253. recommended polling time: ( 385) minutes.
  254. Conveyance self-test routine
  255. recommended polling time: ( 5) minutes.
  256. SCT capabilities: (0x70bd) SCT Status supported.
  257. SCT Error Recovery Control supported.
  258. SCT Feature Control supported.
  259. SCT Data Table supported.
  260.  
  261. SMART Attributes Data Structure revision number: 16
  262. Vendor Specific SMART Attributes with Thresholds:
  263. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  264. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  265. 3 Spin_Up_Time 0x0027 228 227 021 Pre-fail Always - 7600
  266. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 399
  267. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  268. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  269. 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 14521
  270. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  271. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  272. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 399
  273. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  274. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 389
  275. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6654
  276. 194 Temperature_Celsius 0x0022 119 107 000 Old_age Always - 33 (Min/Max 0/45)
  277. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  278. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  279. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  280. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  281. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  282. 241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 563672725615
  283. 242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 337845417316
  284.  
  285. SMART Error Log Version: 1
  286. ATA Error Count: 94 (device log contains only the most recent five errors)
  287. CR = Command Register [HEX]
  288. FR = Features Register [HEX]
  289. SC = Sector Count Register [HEX]
  290. SN = Sector Number Register [HEX]
  291. CL = Cylinder Low Register [HEX]
  292. CH = Cylinder High Register [HEX]
  293. DH = Device/Head Register [HEX]
  294. DC = Device Command Register [HEX]
  295. ER = Error register [HEX]
  296. ST = Status register [HEX]
  297. Powered_Up_Time is measured from power on, and printed as
  298. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  299. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  300.  
  301. Error 94 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  302. When the command that caused the error occurred, the device was active or idle.
  303.  
  304. After command completion occurred, registers were:
  305. ER ST SC SN CL CH DH
  306. -- -- -- -- -- -- --
  307. 04 51 00 00 00 00 00
  308.  
  309. Commands leading to the command that caused the error were:
  310. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  311. -- -- -- -- -- -- -- -- ---------------- --------------------
  312. b4 00 00 00 00 00 00 00 07:10:50.035 SANITIZE DEVICE
  313. ec 00 01 00 00 00 00 00 07:10:50.019 IDENTIFY DEVICE
  314. ec 00 00 00 00 00 00 00 07:10:49.988 IDENTIFY DEVICE
  315. ec 00 00 00 00 00 00 00 07:10:49.987 IDENTIFY DEVICE
  316.  
  317. Error 93 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  318. When the command that caused the error occurred, the device was active or idle.
  319.  
  320. After command completion occurred, registers were:
  321. ER ST SC SN CL CH DH
  322. -- -- -- -- -- -- --
  323. 04 51 00 00 00 00 00
  324.  
  325. Commands leading to the command that caused the error were:
  326. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  327. -- -- -- -- -- -- -- -- ---------------- --------------------
  328. b4 00 00 00 00 00 00 00 07:10:49.597 SANITIZE DEVICE
  329. ec 00 01 00 00 00 00 00 07:10:49.582 IDENTIFY DEVICE
  330. ec 00 00 00 00 00 00 00 07:10:49.550 IDENTIFY DEVICE
  331. ec 00 00 00 00 00 00 00 07:10:49.549 IDENTIFY DEVICE
  332.  
  333. Error 92 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  334. When the command that caused the error occurred, the device was active or idle.
  335.  
  336. After command completion occurred, registers were:
  337. ER ST SC SN CL CH DH
  338. -- -- -- -- -- -- --
  339. 04 51 00 00 00 00 00
  340.  
  341. Commands leading to the command that caused the error were:
  342. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  343. -- -- -- -- -- -- -- -- ---------------- --------------------
  344. b4 00 00 00 00 00 00 00 07:10:49.101 SANITIZE DEVICE
  345. ec 00 01 00 00 00 00 00 07:10:49.086 IDENTIFY DEVICE
  346. ec 00 00 00 00 00 00 00 07:10:49.055 IDENTIFY DEVICE
  347.  
  348. Error 91 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  349. When the command that caused the error occurred, the device was active or idle.
  350.  
  351. After command completion occurred, registers were:
  352. ER ST SC SN CL CH DH
  353. -- -- -- -- -- -- --
  354. 04 51 00 00 00 00 00
  355.  
  356. Commands leading to the command that caused the error were:
  357. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  358. -- -- -- -- -- -- -- -- ---------------- --------------------
  359. b4 00 00 00 00 00 00 00 07:10:48.694 SANITIZE DEVICE
  360. ec 00 01 00 00 00 00 00 07:10:48.679 IDENTIFY DEVICE
  361. ec 00 00 00 00 00 00 00 07:10:48.649 IDENTIFY DEVICE
  362. ec 00 00 00 00 00 00 00 07:10:48.648 IDENTIFY DEVICE
  363.  
  364. Error 90 occurred at disk power-on lifetime: 3965 hours (165 days + 5 hours)
  365. When the command that caused the error occurred, the device was active or idle.
  366.  
  367. After command completion occurred, registers were:
  368. ER ST SC SN CL CH DH
  369. -- -- -- -- -- -- --
  370. 04 51 00 00 00 00 00
  371.  
  372. Commands leading to the command that caused the error were:
  373. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  374. -- -- -- -- -- -- -- -- ---------------- --------------------
  375. b4 00 00 00 00 00 00 00 07:10:48.285 SANITIZE DEVICE
  376. ec 00 01 00 00 00 00 00 07:10:48.270 IDENTIFY DEVICE
  377. ec 00 00 00 00 00 00 00 07:10:48.246 IDENTIFY DEVICE
  378.  
  379. SMART Self-test log structure revision number 1
  380. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  381. # 1 Short offline Completed without error 00% 3965 -
  382. # 2 Short offline Completed without error 00% 3835 -
  383. # 3 Short offline Completed without error 00% 2597 -
  384. # 4 Short offline Completed without error 00% 1162 -
  385. # 5 Short offline Completed without error 00% 23 -
  386. # 6 Short offline Completed without error 00% 3 -
  387. # 7 Vendor (0xdf) Completed without error 00% 3 -
  388. # 8 Short offline Completed without error 00% 1 -
  389.  
  390. SMART Selective self-test log data structure revision number 1
  391. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  392. 1 0 0 Not_testing
  393. 2 0 0 Not_testing
  394. 3 0 0 Not_testing
  395. 4 0 0 Not_testing
  396. 5 0 0 Not_testing
  397. Selective self-test flags (0x0):
  398. After scanning selected spans, do NOT read-scan remainder of disk.
  399. If Selective self-test is pending on power-up, resume after 0 minute delay.
  400.  
  401. [root@SEMO-IS-ME-04 ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!