API tools faq
paste
Advertisement
Bullet64

2.try emmc & pcie & wifi

Bullet64
Mar 18th, 2019
196
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 67.42 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Willkommen zu minicom 2.7
  3.  
  4. Optionen: I18n
  5. Übersetzt am Apr 22 2017, 09:14:19.
  6. Port /dev/ttyUSB0, 12:45:22
  7.  
  8. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  9. DDR Version 1.13 20180801
  10. In
  11. Channel 0: LPDDR4,50MHz
  12. CS = 0
  13. MR0=0x98
  14. MR4=0x3
  15. MR5=0xFF
  16. MR8=0x8
  17. MR12=0x4D
  18. MR14=0x4D
  19. MR18=0x0
  20. MR19=0x0
  21. MR24=0x8
  22. MR25=0x0
  23. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  24. Channel 1: LPDDR4,50MHz
  25. CS = 0
  26. MR0=0x98
  27. MR4=0x3
  28. MR5=0xFF
  29. MR8=0x8
  30. MR12=0x4D
  31. MR14=0x4D
  32. MR18=0x0
  33. MR19=0x0
  34. MR24=0x8
  35. MR25=0x0
  36. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  37. 256B stride
  38. channel 0
  39. CS = 0
  40. MR0=0x98
  41. MR4=0x3
  42. MR5=0xFF
  43. MR8=0x8
  44. MR12=0x72
  45. MR14=0x72
  46. MR18=0x0
  47. MR19=0x0
  48. MR24=0x8
  49. MR25=0x0
  50. channel 1
  51. CS = 0
  52. MR0=0x98
  53. MR4=0x3
  54. MR5=0xFF
  55. MR8=0x8
  56. MR12=0x72
  57. MR14=0x72
  58. MR18=0x0
  59. MR19=0x0
  60. MR24=0x8
  61. MR25=0x0
  62. channel 0 training pass!
  63. channel 1 training pass!
  64. change freq to 400MHz 0,1
  65. channel 0
  66. CS = 0
  67. MR0=0x98
  68. MR4=0x81
  69. MR5=0xFF
  70. MR8=0x8
  71. MR12=0x72
  72. MR14=0x72
  73. MR18=0x0
  74. MR19=0x0
  75. MR24=0x8
  76. MR25=0x0
  77. channel 1
  78. CS = 0
  79. MR0=0x98
  80. MR4=0x81
  81. MR5=0xFF
  82. MR8=0x8
  83. MR12=0x72
  84. MR14=0x72
  85. MR18=0x0
  86. MR19=0x0
  87. MR24=0x8
  88. MR25=0x0
  89. channel 0 training pass!
  90. channel 1 training pass!
  91. change freq to 800MHz 1,0
  92. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  93. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  94. pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
  95. OUT
  96. U-Boot SPL board init
  97.  
  98. U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09)
  99. booted from eMMC
  100. Trying to boot from MMC1
  101. NOTICE: BL31: v1.3(debug):65aa5ce
  102. NOTICE: BL31: Built : 10:47:37, Jun 19 2018
  103. NOTICE: BL31: Rockchip release version: v1.1
  104. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  105. INFO: Using opteed sec cpu_context!
  106. INFO: boot cpu mask: 0
  107. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  108. INFO: BL31: Initializing runtime services
  109. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
  110. ERROR: Error initializing runtime service opteed_fast
  111. INFO: BL31: Preparing for EL3 exit to normal world
  112. INFO: Entry point address = 0x200000
  113. INFO: SPSR = 0x3c9
  114.  
  115.  
  116. U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000)
  117.  
  118. Model: Pine64 RockPro64
  119. DRAM: 2 GiB
  120. DCDC_REG1@vdd_center: ; enabling
  121. DCDC_REG2@vdd_cpu_l: ; enabling
  122. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  123. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  124. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  125. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  126. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  127. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  128. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  129. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  130. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  131. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  132. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  133. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  134. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  135. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  136. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  137. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  138. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  139. vdd-log@vdd_log: ; enabling (ret: -38)
  140. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  141. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  142. *** Warning - bad CRC, using default environment
  143.  
  144. In: serial@ff1a0000
  145. Out: serial@ff1a0000
  146. Err: serial@ff1a0000
  147. Model: Pine64 RockPro64
  148. Net: eth0: ethernet@fe300000
  149. Hit any key to stop autoboot: 0
  150. switch to partitions #0, OK
  151. mmc0(part 0) is current device
  152. Scanning mmc 0:7...
  153. Found /boot/extlinux/extlinux.conf
  154. Retrieving file: /boot/extlinux/extlinux.conf
  155. 1055 bytes read in 89 ms (10.7 KiB/s)
  156. select kernel
  157. 1: kernel-4.4.167-1138-rockchip-ayufan-geff8a74c8db9
  158. 2: kernel-4.4.167-1138-rockchip-ayufan-geff8a74c8db9-memtest
  159. Enter choice: 1: kernel-4.4.167-1138-rockchip-ayufan-geff8a74c8db9
  160. Retrieving file: /boot/initrd.img-4.4.167-1138-rockchip-ayufan-geff8a74c8db9
  161. 6085333 bytes read in 430 ms (13.5 MiB/s)
  162. Retrieving file: /boot/vmlinuz-4.4.167-1138-rockchip-ayufan-geff8a74c8db9
  163. 20123656 bytes read in 998 ms (19.2 MiB/s)
  164. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  165. Retrieving file: /boot/dtbs/4.4.167-1138-rockchip-ayufan-geff8a74c8db9/rockchipb
  166. 88730 bytes read in 736 ms (117.2 KiB/s)
  167. ## Flattened Device Tree blob at 01f00000
  168. Booting using the fdt blob at 0x1f00000
  169. Loading Ramdisk to 7d935000, end 7df02ad5 ... OK
  170. Loading Device Tree to 000000007d91c000, end 000000007d934a99 ... OK
  171.  
  172. Starting kernel ...
  173.  
  174. [ 0.000000] Booting Linux on physical CPU 0x0
  175. [ 0.000000] Initializing cgroup subsys cpuset
  176. [ 0.000000] Initializing cgroup subsys cpu
  177. [ 0.000000] Initializing cgroup subsys cpuacct
  178. [ 0.000000] Linux version 4.4.167-1138-rockchip-ayufan-geff8a74c8db9 (root@r9
  179. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  180. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  181. [ 0.000000] bootconsole [uart0] enabled
  182. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  183. [ 0.000000] psci: probing for conduit method from DT.
  184. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  185. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  186. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  187. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef1000 s46248 r8192 d316
  188. [ 0.000000] Detected VIPT I-cache on CPU0
  189. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  190. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  191. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  192. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  193. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  194. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  195. [ 0.000000] software IO TLB [mem 0x7fea9000-0x7fee9000] (0MB) mapped at [fff]
  196. [ 0.000000] Memory: 2030120K/2095104K available (12286K kernel code, 1732K r)
  197. [ 0.000000] Virtual kernel memory layout:
  198. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  199. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  200. [ 0.000000] .init : 0xffffff80090e0000 - 0xffffff8009200000 ( 1152 )
  201. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c80000 ( 12288 )
  202. [ 0.000000] .rodata : 0xffffff8008c80000 - 0xffffff80090e0000 ( 4480 )
  203. [ 0.000000] .data : 0xffffff8009200000 - 0xffffff80093b1008 ( 1733 )
  204. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  205. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  206. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  207. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  208. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  209. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  210. [ 0.000000] Hierarchical RCU implementation.
  211. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  212. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  213. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  214. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  215. [ 0.000000] GIC: Using split EOI/Deactivate mode
  216. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  217. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  218. [ 0.000000] ITS: using cache flushing for cmd queue
  219. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  220. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  221. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  222. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  223. [ 0.000000] GIC: using cache flushing for LPI property table
  224. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  225. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  226. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  227. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  228. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  229. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  230. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  231. [ 0.002056] Console: colour dummy device 80x25
  232. [ 0.002473] console [tty0] enabled
  233. [ 0.002801] bootconsole [uart0] disabled
  234. [ 0.000000] Booting Linux on physical CPU 0x0
  235. [ 0.000000] Initializing cgroup subsys cpuset
  236. [ 0.000000] Initializing cgroup subsys cpu
  237. [ 0.000000] Initializing cgroup subsys cpuacct
  238. [ 0.000000] Linux version 4.4.167-1138-rockchip-ayufan-geff8a74c8db9 (root@r9
  239. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  240. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  241. [ 0.000000] bootconsole [uart0] enabled
  242. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  243. [ 0.000000] psci: probing for conduit method from DT.
  244. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  245. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  246. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  247. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef1000 s46248 r8192 d316
  248. [ 0.000000] Detected VIPT I-cache on CPU0
  249. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  250. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  251. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  252. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  253. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  254. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  255. [ 0.000000] software IO TLB [mem 0x7fea9000-0x7fee9000] (0MB) mapped at [fff]
  256. [ 0.000000] Memory: 2030120K/2095104K available (12286K kernel code, 1732K r)
  257. [ 0.000000] Virtual kernel memory layout:
  258. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  259. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  260. [ 0.000000] .init : 0xffffff80090e0000 - 0xffffff8009200000 ( 1152 )
  261. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c80000 ( 12288 )
  262. [ 0.000000] .rodata : 0xffffff8008c80000 - 0xffffff80090e0000 ( 4480 )
  263. [ 0.000000] .data : 0xffffff8009200000 - 0xffffff80093b1008 ( 1733 )
  264. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  265. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  266. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  267. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  268. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  269. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  270. [ 0.000000] Hierarchical RCU implementation.
  271. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  272. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  273. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  274. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  275. [ 0.000000] GIC: Using split EOI/Deactivate mode
  276. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  277. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  278. [ 0.000000] ITS: using cache flushing for cmd queue
  279. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  280. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  281. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  282. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  283. [ 0.000000] GIC: using cache flushing for LPI property table
  284. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  285. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  286. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  287. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  288. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  289. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  290. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  291. [ 0.002056] Console: colour dummy device 80x25
  292. [ 0.002473] console [tty0] enabled
  293. [ 0.002801] bootconsole [uart0] disabled
  294. [ 0.003185] Calibrating delay loop (skipped), value calculated using timer f)
  295. [ 0.003212] pid_max: default: 32768 minimum: 301
  296. [ 0.003330] Security Framework initialized
  297. [ 0.003346] Yama: becoming mindful.
  298. [ 0.003372] AppArmor: AppArmor disabled by boot time parameter
  299. [ 0.003437] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  300. [ 0.003457] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  301. [ 0.004150] Initializing cgroup subsys io
  302. [ 0.004176] Initializing cgroup subsys memory
  303. [ 0.004212] Initializing cgroup subsys devices
  304. [ 0.004232] Initializing cgroup subsys freezer
  305. [ 0.004251] Initializing cgroup subsys net_cls
  306. [ 0.004270] Initializing cgroup subsys perf_event
  307. [ 0.004290] Initializing cgroup subsys net_prio
  308. [ 0.004314] Initializing cgroup subsys hugetlb
  309. [ 0.004331] Initializing cgroup subsys pids
  310. [ 0.004378] ftrace: allocating 45344 entries in 178 pages
  311. [ 0.115114] sched-energy: Sched-energy-costs installed from DT
  312. [ 0.115143] CPU0: update cpu_capacity 401
  313. [ 0.115204] ASID allocator initialised with 32768 entries
  314. [ 0.118250] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  315. [ 0.118717] Platform MSI: /interrupt-controller@fee00000/interrupt-controlled
  316. [ 0.120031] Detected VIPT I-cache on CPU1
  317. [ 0.120061] CPU1: found redistributor 1 region 0:0x00000000fef20000
  318. [ 0.120085] CPU1: using LPI pending table @0x000000007cf30000
  319. [ 0.120129] CPU1: update cpu_capacity 401
  320. [ 0.120132] CPU1: Booted secondary processor [410fd034]
  321. [ 0.120663] Detected VIPT I-cache on CPU2
  322. [ 0.120683] CPU2: found redistributor 2 region 0:0x00000000fef40000
  323. [ 0.120706] CPU2: using LPI pending table @0x000000007cf60000
  324. [ 0.120733] CPU2: update cpu_capacity 401
  325. [ 0.120737] CPU2: Booted secondary processor [410fd034]
  326. [ 0.121255] Detected VIPT I-cache on CPU3
  327. [ 0.121275] CPU3: found redistributor 3 region 0:0x00000000fef60000
  328. [ 0.121298] CPU3: using LPI pending table @0x000000007cfc0000
  329. [ 0.121324] CPU3: update cpu_capacity 401
  330. [ 0.121328] CPU3: Booted secondary processor [410fd034]
  331. [ 0.121849] Detected PIPT I-cache on CPU4
  332. [ 0.121873] CPU4: found redistributor 100 region 0:0x00000000fef80000
  333. [ 0.121907] CPU4: using LPI pending table @0x000000007cff0000
  334. [ 0.121943] CPU4: update cpu_capacity 1024
  335. [ 0.121946] CPU4: Booted secondary processor [410fd082]
  336. [ 0.122523] Detected PIPT I-cache on CPU5
  337. [ 0.122542] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  338. [ 0.122574] CPU5: using LPI pending table @0x000000007c420000
  339. [ 0.122601] CPU5: update cpu_capacity 1024
  340. [ 0.122604] CPU5: Booted secondary processor [410fd082]
  341. [ 0.122686] Brought up 6 CPUs
  342. [ 0.123363] SMP: Total of 6 processors activated.
  343. [ 0.123394] CPU features: detected feature: GIC system register CPU interface
  344. [ 0.123428] CPU features: detected feature: 32-bit EL0 Support
  345. [ 0.123463] CPU: All CPU(s) started at EL2
  346. [ 0.123529] alternatives: patching kernel code
  347. [ 0.124908] devtmpfs: initialized
  348. [ 0.140607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  349. [ 0.140664] futex hash table entries: 2048 (order: 5, 131072 bytes)
  350. [ 0.141112] xor: measuring software checksum speed
  351. [ 0.178206] 8regs : 2875.000 MB/sec
  352. [ 0.218266] 8regs_prefetch: 2578.000 MB/sec
  353. [ 0.258325] 32regs : 3243.000 MB/sec
  354. [ 0.298385] 32regs_prefetch: 2864.000 MB/sec
  355. [ 0.298404] xor: using function: 32regs (3243.000 MB/sec)
  356. [ 0.298438] pinctrl core: initialized pinctrl subsystem
  357. [ 0.300025] Failed to find legacy iommu devices
  358. [ 0.300423] NET: Registered protocol family 16
  359. [ 0.310850] cpuidle: using governor ladder
  360. [ 0.322873] cpuidle: using governor menu
  361. [ 0.323204] vdso: 2 pages (1 code @ ffffff8008c86000, 1 data @ ffffff8009204)
  362. [ 0.323259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  363. [ 0.323693] DMA: preallocated 1024 KiB pool for atomic allocations
  364. [ 0.434611] raid6: int64x1 gen() 474 MB/s
  365. [ 0.502736] raid6: int64x1 xor() 421 MB/s
  366. [ 0.570871] raid6: int64x2 gen() 656 MB/s
  367. [ 0.638947] raid6: int64x2 xor() 602 MB/s
  368. [ 0.707014] raid6: int64x4 gen() 1027 MB/s
  369. [ 0.775139] raid6: int64x4 xor() 676 MB/s
  370. [ 0.843264] raid6: int64x8 gen() 775 MB/s
  371. [ 0.911334] raid6: int64x8 xor() 631 MB/s
  372. [ 0.979468] raid6: neonx1 gen() 995 MB/s
  373. [ 1.047544] raid6: neonx1 xor() 677 MB/s
  374. [ 1.115638] raid6: neonx2 gen() 1333 MB/s
  375. [ 1.183740] raid6: neonx2 xor() 991 MB/s
  376. [ 1.251853] raid6: neonx4 gen() 1807 MB/s
  377. [ 1.319958] raid6: neonx4 xor() 1195 MB/s
  378. [ 1.388053] raid6: neonx8 gen() 1693 MB/s
  379. [ 1.456145] raid6: neonx8 xor() 1265 MB/s
  380. [ 1.456164] raid6: using algorithm neonx4 gen() 1807 MB/s
  381. [ 1.456189] raid6: .... xor() 1195 MB/s, rmw enabled
  382. [ 1.456208] raid6: using intx1 recovery algorithm
  383. [ 1.457905] vcc3v3_pcie: supplied by dc_12v
  384. [ 1.458451] vcc_sys: supplied by dc_12v
  385. [ 1.458970] vcc3v3_sys: supplied by vcc_sys
  386. [ 1.460107] iommu: Adding device ff650000.vpu_service to group 0
  387. [ 1.460226] iommu: Adding device ff660000.rkvdec to group 1
  388. [ 1.460351] iommu: Adding device ff8f0000.vop to group 2
  389. [ 1.460445] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  390. [ 1.460465] iommu: Removing device ff8f0000.vop from group 2
  391. [ 1.460530] iommu: Adding device ff900000.vop to group 2
  392. [ 1.461018] rk_iommu ff650800.iommu: can't get sclk
  393. [ 1.461297] rk_iommu ff660480.iommu: can't get sclk
  394. [ 1.461526] rk_iommu ff903f00.iommu: can't get sclk
  395. [ 1.461895] SCSI subsystem initialized
  396. [ 1.462241] usbcore: registered new interface driver usbfs
  397. [ 1.462298] usbcore: registered new interface driver hub
  398. [ 1.462389] usbcore: registered new device driver usb
  399. [ 1.462499] media: Linux media interface: v0.10
  400. [ 1.462548] Linux video capture interface: v2.00
  401. [ 1.462652] pps_core: LinuxPPS API ver. 1 registered
  402. [ 1.462672] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  403. [ 1.462721] PTP clock support registered
  404. [ 1.463825] Advanced Linux Sound Architecture Driver Initialized.
  405. [ 1.464364] Bluetooth: Core ver 2.21
  406. [ 1.464404] NET: Registered protocol family 31
  407. [ 1.464423] Bluetooth: HCI device and connection manager initialized
  408. [ 1.464448] Bluetooth: HCI socket layer initialized
  409. [ 1.464473] Bluetooth: L2CAP socket layer initialized
  410. [ 1.464509] Bluetooth: SCO socket layer initialized
  411. [ 1.464888] NetLabel: Initializing
  412. [ 1.464908] NetLabel: domain hash size = 128
  413. [ 1.464926] NetLabel: protocols = UNLABELED CIPSOv4
  414. [ 1.464974] NetLabel: unlabeled traffic allowed by default
  415. [ 1.465779] clocksource: Switched to clocksource arch_sys_counter
  416. [ 1.530341] thermal thermal_zone1: power_allocator: sustainable_power will bd
  417. [ 1.530593] NET: Registered protocol family 2
  418. [ 1.531030] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  419. [ 1.531151] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  420. [ 1.531552] TCP: Hash tables configured (established 16384 bind 16384)
  421. [ 1.531652] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  422. [ 1.531730] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  423. [ 1.532033] NET: Registered protocol family 1
  424. [ 1.532373] RPC: Registered named UNIX socket transport module.
  425. [ 1.532396] RPC: Registered udp transport module.
  426. [ 1.532415] RPC: Registered tcp transport module.
  427. [ 1.532433] RPC: Registered tcp NFSv4.1 backchannel transport module.
  428. [ 1.533195] Trying to unpack rootfs image as initramfs...
  429. [ 1.824457] Freeing initrd memory: 5940K
  430. [ 1.825028] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  431. [ 1.825146] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  432. [ 1.826337] kvm [1]: 8-bit VMID
  433. [ 1.826359] kvm [1]: Hyp mode initialized successfully
  434. [ 1.826498] kvm [1]: interrupt-controller@fff20000 IRQ10
  435. [ 1.826702] kvm [1]: timer IRQ12
  436. [ 1.829724] audit: initializing netlink subsys (disabled)
  437. [ 1.829825] audit: type=2000 audit(1.760:1): initialized
  438. [ 1.830581] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  439. [ 1.837858] VFS: Disk quotas dquot_6.6.0
  440. [ 1.838048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  441. [ 1.839661] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  442. [ 1.840964] NFS: Registering the id_resolver key type
  443. [ 1.841005] Key type id_resolver registered
  444. [ 1.841024] Key type id_legacy registered
  445. [ 1.841056] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  446. [ 1.841853] fuse init (API version 7.23)
  447. [ 1.842659] JFS: nTxBlock = 8192, nTxLock = 65536
  448. [ 1.848410] SGI XFS with ACLs, security attributes, realtime, no debug enabld
  449. [ 1.850750] Key type big_key registered
  450. [ 1.850832]
  451. [ 1.850832] TEE Core Framework initialization (ver 1:0.1)
  452. [ 1.850892] TEE armv7 Driver initialization
  453. [ 1.851316] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  454. [ 1.851340] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  455. [ 1.851544] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  456. [ 1.855543] NET: Registered protocol family 38
  457. [ 1.855594] Key type asymmetric registered
  458. [ 1.855620] Asymmetric key parser 'x509' registered
  459. [ 1.855851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  460. [ 1.856015] io scheduler noop registered
  461. [ 1.856038] io scheduler deadline registered (default)
  462. [ 1.856084] io scheduler cfq registered
  463. [ 1.857676] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS suppr
  464. [ 1.863063] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  465. [ 1.863308] rk-vcodec ff650000.vpu_service: probe device
  466. [ 1.863532] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  467. [ 1.864077] rk-vcodec ff650000.vpu_service: could not find power_model node
  468. [ 1.864101] rk-vcodec ff650000.vpu_service: init success
  469. [ 1.864355] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  470. [ 1.864793] rk-vcodec ff660000.rkvdec: probe device
  471. [ 1.864997] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  472. [ 1.865373] rk-vcodec ff660000.rkvdec: could not find power_model node
  473. [ 1.865397] rk-vcodec ff660000.rkvdec: init success
  474. [ 1.866843] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  475. [ 1.866880] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  476. [ 1.868346] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  477. [ 1.868382] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  478. [ 1.869708] pwm-regulator: supplied by vcc_sys
  479. [ 1.870431] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  480. [ 1.870995] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud =A
  481. [ 1.871427] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud =A
  482. [ 1.996478] console [ttyS2] enabled
  483. [ 1.997882] [drm] Initialized drm 1.1.0 20060810
  484. [ 2.002336] [drm] Rockchip DRM driver version: v1.0.1
  485. [ 2.003316] usbcore: registered new interface driver udl
  486. [ 2.005264] Unable to detect cache hierarchy for CPU 0
  487. [ 2.006515] brd: module loaded
  488. [ 2.012019] loop: module loaded
  489. [ 2.012342] lkdtm: No crash points registered, enable through debugfs
  490. [ 2.014404] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  491. [ 2.015009] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  492. [ 2.015607] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  493. [ 2.016671] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  494. [ 2.017162] 3 ofpart partitions found on MTD device spi32766.0
  495. [ 2.017692] Creating 3 MTD partitions on "spi32766.0":
  496. [ 2.018180] 0x000000000000-0x0000003f8000 : "loader"
  497. [ 2.019520] 0x0000003f8000-0x000000400000 : "env"
  498. [ 2.020730] 0x0000007c0000-0x000000800000 : "vendor"
  499. [ 2.023491] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  500. [ 2.024218] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  501. [ 2.024857] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  502. [ 2.025372] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  503. [ 2.025934] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  504. [ 2.026676] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  505. [ 2.027305] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  506. [ 2.032864] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  507. [ 2.033491] stmmac - user ID: 0x10, Synopsys ID: 0x35
  508. [ 2.033962] Ring mode enabled
  509. [ 2.034247] DMA HW capability register supported
  510. [ 2.034649] Normal descriptors
  511. [ 2.034970] RX Checksum Offload Engine supported (type 2)
  512. [ 2.035466] Wake-Up On Lan supported
  513. [ 2.035835] Enable RX Mitigation via HW Watchdog Timer
  514. [ 2.112566] libphy: stmmac: probed
  515. [ 2.112896] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  516. [ 2.113480] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  517. [ 2.115448] Rockchip WiFi SYS interface (V1.00) ...
  518. [ 2.115978] usbcore: registered new interface driver cdc_ether
  519. [ 2.116539] usbcore: registered new interface driver rndis_host
  520. [ 2.118490] rockchip-dwc3 usb0: failed to get drvdata dwc3
  521. [ 2.123316] rockchip-dwc3 usb1: fail to get drvdata hcd
  522. [ 2.124946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  523. [ 2.125549] ehci-pci: EHCI PCI platform driver
  524. [ 2.126029] ehci-platform: EHCI generic platform driver
  525. [ 2.130363] ehci-platform fe3c0000.usb: EHCI Host Controller
  526. [ 2.131030] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus1
  527. [ 2.131845] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  528. [ 2.141800] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  529. [ 2.142513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  530. [ 2.143130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  531. [ 2.143792] usb usb1: Product: EHCI Host Controller
  532. [ 2.144240] usb usb1: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  533. [ 2.145014] usb usb1: SerialNumber: fe3c0000.usb
  534. [ 2.145933] hub 1-0:1.0: USB hub found
  535. [ 2.146305] hub 1-0:1.0: 1 port detected
  536. [ 2.147220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  537. [ 2.147795] ohci-platform: OHCI generic platform driver
  538. [ 2.148763] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  539. [ 2.149517] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus2
  540. [ 2.150332] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  541. [ 2.209943] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  542. [ 2.210561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  543. [ 2.211222] usb usb2: Product: Generic Platform OHCI controller
  544. [ 2.211759] usb usb2: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  545. [ 2.212533] usb usb2: SerialNumber: fe3e0000.usb
  546. [ 2.213366] hub 2-0:1.0: USB hub found
  547. [ 2.213738] hub 2-0:1.0: 1 port detected
  548. [ 2.215965] usbcore: registered new interface driver iforce
  549. [ 2.216533] usbcore: registered new interface driver xpad
  550. [ 2.217330] usbcore: registered new interface driver usbtouchscreen
  551. [ 2.218168] .. rk pwm remotectl v1.1 init
  552. [ 2.218776] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/inpu0
  553. [ 2.220295] i2c /dev entries driver
  554. [ 2.221806] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  555. [ 2.222489] fan53555-reg: supplied by vcc_sys
  556. [ 2.225187] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  557. [ 2.225878] fan53555-reg: supplied by vcc_sys
  558. [ 2.228759] rk808 0-001b: Pmic Chip id: 0x0
  559. [ 2.232233] rk808-regulator rk808-regulator: there is no dvs0 gpio
  560. [ 2.232840] rk808-regulator rk808-regulator: there is no dvs1 gpio
  561. [ 2.233482] DCDC_REG1: supplied by vcc_sys
  562. [ 2.234629] DCDC_REG2: supplied by vcc_sys
  563. [ 2.235583] DCDC_REG3: supplied by vcc_sys
  564. [ 2.236251] DCDC_REG4: supplied by vcc_sys
  565. [ 2.237075] LDO_REG1: supplied by vcc_sys
  566. [ 2.238583] LDO_REG2: supplied by vcc_sys
  567. [ 2.239930] LDO_REG3: supplied by vcc_sys
  568. [ 2.241277] LDO_REG4: supplied by vcc_sys
  569. [ 2.242638] LDO_REG5: supplied by vcc_sys
  570. [ 2.244001] LDO_REG6: supplied by vcc_sys
  571. [ 2.245361] LDO_REG7: supplied by vcc_sys
  572. [ 2.247247] LDO_REG8: supplied by vcc_sys
  573. [ 2.248612] SWITCH_REG1: supplied by vcc3v3_sys
  574. [ 2.249333] SWITCH_REG2: supplied by vcc3v3_sys
  575. [ 2.253368] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  576. [ 2.254430] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff800970
  577. [ 2.255753] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800970
  578. [ 2.257547] fusb302 4-0022: Can't get property of role, set role to default P
  579. [ 2.266532] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, trE
  580. [ 2.267363] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800970
  581. [ 2.269150] IR NEC protocol handler initialized
  582. [ 2.269570] IR RC5(x/sz) protocol handler initialized
  583. [ 2.270061] IR RC6 protocol handler initialized
  584. [ 2.270479] IR JVC protocol handler initialized
  585. [ 2.270897] IR Sony protocol handler initialized
  586. [ 2.271322] IR SANYO protocol handler initialized
  587. [ 2.271753] IR Sharp protocol handler initialized
  588. [ 2.272186] IR MCE Keyboard/mouse protocol handler initialized
  589. [ 2.272717] IR XMP protocol handler initialized
  590. [ 2.273633] usbcore: registered new interface driver uvcvideo
  591. [ 2.274166] USB Video Class driver (1.1.1)
  592. [ 2.277813] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, te7
  593. [ 2.278775] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  594. [ 2.280468] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-m
  595. [ 2.281246] Bluetooth: Virtual HCI driver ver 1.5
  596. [ 2.281815] Bluetooth: HCI UART driver ver 2.3
  597. [ 2.282225] Bluetooth: HCI UART protocol H4 registered
  598. [ 2.282692] Bluetooth: HCI UART protocol LL registered
  599. [ 2.283159] Bluetooth: HCI UART protocol ATH3K registered
  600. [ 2.283707] usbcore: registered new interface driver bfusb
  601. [ 2.284258] usbcore: registered new interface driver btusb
  602. [ 2.285177] cpu cpu0: Failed to get leakage
  603. [ 2.285643] cpu cpu0: Failed to get pvtm
  604. [ 2.286274] cpu cpu4: Failed to get leakage
  605. [ 2.286731] cpu cpu4: Failed to get pvtm
  606. [ 2.291344] sdhci: Secure Digital Host Controller Interface driver
  607. [ 2.291908] sdhci: Copyright(c) Pierre Ossman
  608. [ 2.292311] Synopsys Designware Multimedia Card Interface Driver
  609. [ 2.293684] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  610. [ 2.295451] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  611. [ 2.296141] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  612. [ 2.296762] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  613. [ 2.297321] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bio
  614. [ 2.298261] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was.
  615. [ 2.299105] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  616. [ 2.299921] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  617. [ 2.300610] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  618. [ 2.313947] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  619. [ 2.330860] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  620. [ 2.331664] sdhci-pltfm: SDHCI platform and OF driver helper
  621. [ 2.333839] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  622. [ 2.334386] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  623. [ 2.365862] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  624. [ 2.368163] hidraw: raw HID events driver (C) Jiri Kosina
  625. [ 2.374371] usbcore: registered new interface driver usbhid
  626. [ 2.374883] usbhid: USB HID core driver
  627. [ 2.379322] usbcore: registered new interface driver snd-usb-audio
  628. [ 2.380661] es8316 1-0010: Can not read property spk_ctl_gpio
  629. [ 2.393669] u32 classifier
  630. [ 2.394025] Netfilter messages via NETLINK v0.30.
  631. [ 2.394563] ip_set: protocol 6
  632. [ 2.395280] Initializing XFRM netlink socket
  633. [ 2.396779] NET: Registered protocol family 10
  634. [ 2.399442] NET: Registered protocol family 17
  635. [ 2.399913] NET: Registered protocol family 15
  636. [ 2.400389] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
  637. [ 2.401600] Bridge firewalling registered
  638. [ 2.402801] Bluetooth: RFCOMM socket layer initialized
  639. [ 2.403336] Bluetooth: RFCOMM ver 1.11
  640. [ 2.403732] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  641. [ 2.404300] Bluetooth: HIDP socket layer initialized
  642. [ 2.404810] 8021q: 802.1Q VLAN Support v1.8
  643. [ 2.405226] [WLAN_RFKILL]: Enter rfkill_wlan_init
  644. [ 2.405992] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  645. [ 2.406471] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  646. [ 2.407091] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  647. [ 2.407733] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by g.
  648. [ 2.408469] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_w.
  649. [ 2.409292] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not foun!
  650. [ 2.409971] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  651. [ 2.410449] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  652. [ 2.410932] [BT_RFKILL]: Enter rfkill_rk_init
  653. [ 2.411681] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts.
  654. [ 2.412454] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset.
  655. [ 2.413198] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  656. [ 2.413954] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  657. [ 2.415959] [BT_RFKILL]: Request irq for bt wakeup host
  658. [ 2.416502] [BT_RFKILL]: ** disable irq
  659. [ 2.417008] [BT_RFKILL]: bt_default device registered.
  660. [ 2.417562] Key type dns_resolver registered
  661. [ 2.418646] Registered cp15_barrier emulation handler
  662. [ 2.419256] Registered setend emulation handler
  663. [ 2.420771] registered taskstats version 1
  664. [ 2.423774] Btrfs loaded, integrity-checker=on
  665. [ 2.424251] BTRFS: selftest: Running btrfs free space cache tests
  666. [ 2.424817] BTRFS: selftest: Running extent only tests
  667. [ 2.425296] BTRFS: selftest: Running bitmap only tests
  668. [ 2.425809] BTRFS: selftest: Running bitmap and extent tests
  669. [ 2.426343] BTRFS: selftest: Running space stealing from bitmap to extent
  670. [ 2.427689] BTRFS: selftest: Free space cache tests finished
  671. [ 2.428201] BTRFS: selftest: Running extent buffer operation tests
  672. [ 2.428732] BTRFS: selftest: Running btrfs_split_item tests
  673. [ 2.429295] BTRFS: selftest: Running find delalloc tests
  674. [ 2.429743] mmc1: MAN_BKOPS_EN bit is not set
  675. [ 2.441751] mmc1: new HS200 MMC card at address 0001
  676. [ 2.442985] mmcblk1: mmc1:0001 NCard 28.9 GiB
  677. [ 2.443691] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
  678. [ 2.444515] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
  679. [ 2.445327] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB
  680. [ 2.450949] GPT:Primary header thinks Alt. header is not at the end of the d.
  681. [ 2.451649] GPT:4188159 != 60620799
  682. [ 2.451981] GPT:Alternate GPT header not at the end of the disk.
  683. [ 2.452534] GPT:4188159 != 60620799
  684. [ 2.452867] GPT: Use GNU Parted to correct GPT errors.
  685. [ 2.453389] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  686. [ 2.594670] BTRFS: selftest: Running btrfs_get_extent tests
  687. [ 2.595291] BTRFS: selftest: Running hole first btrfs_get_extent test
  688. [ 2.595875] BTRFS: selftest: Running outstanding_extents tests
  689. [ 2.596425] BTRFS: selftest: Running qgroup tests
  690. [ 2.596844] BTRFS: selftest: Qgroup basic add
  691. [ 2.597273] BTRFS: selftest: Qgroup multiple refs test
  692. [ 2.644618] Key type encrypted registered
  693. [ 2.645709] rga2: Module initialized.
  694. [ 2.648663] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS suppr
  695. [ 2.653515] rockchip-drm display-subsystem: devfreq is not set
  696. [ 2.654856] rockchip-vop ff900000.vop: missing rockchip,grf property
  697. [ 2.655964] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff)
  698. [ 2.656799] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  699. [ 2.657764] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff)
  700. [ 2.659380] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  701. [ 2.660050] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bur
  702. [ 2.661009] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
  703. [ 2.665953] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xfffff)
  704. [ 2.668391] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  705. [ 2.669955] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  706. [ 2.670877] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8)
  707. [ 2.671675] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  708. [ 2.672315] [drm] No driver support for vblank timestamp query.
  709. [ 2.673308] rockchip-drm display-subsystem: failed to parse loader memory
  710. [ 2.674103] rockchip-drm display-subsystem: No connectors reported connecteds
  711. [ 2.675006] [drm] Cannot find any crtc or sizes - going 1024x768
  712. [ 2.683580] rockchip-drm display-subsystem: fb0: frame buffer device
  713. [ 2.708593] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  714. [ 2.710042] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus n3
  715. [ 2.711105] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110
  716. [ 2.712064] xhci-hcd xhci-hcd.7.auto: irq 228, io mem 0xfe800000
  717. [ 2.713226] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  718. [ 2.713961] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  719. [ 2.714699] usb usb3: Product: xHCI Host Controller
  720. [ 2.715193] usb usb3: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  721. [ 2.716044] usb usb3: SerialNumber: xhci-hcd.7.auto
  722. [ 2.718422] hub 3-0:1.0: USB hub found
  723. [ 2.718891] hub 3-0:1.0: 1 port detected
  724. [ 2.719999] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  725. [ 2.721417] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus n4
  726. [ 2.722462] usb usb4: We don't know the algorithms for LPM for this host, di.
  727. [ 2.723540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  728. [ 2.724210] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  729. [ 2.724946] usb usb4: Product: xHCI Host Controller
  730. [ 2.725440] usb usb4: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  731. [ 2.726368] usb usb4: SerialNumber: xhci-hcd.7.auto
  732. [ 2.728318] hub 4-0:1.0: USB hub found
  733. [ 2.728776] hub 4-0:1.0: 1 port detected
  734. [ 2.732412] xhci-hcd xhci-hcd.7.auto: remove, state 1
  735. [ 2.732954] usb usb4: USB disconnect, device number 1
  736. [ 2.758296] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microsecon.
  737. [ 2.759044] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting r.
  738. [ 2.759874] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
  739. [ 2.760940] xhci-hcd xhci-hcd.7.auto: remove, state 1
  740. [ 2.761445] usb usb3: USB disconnect, device number 1
  741. [ 2.763184] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
  742. [ 2.770062] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  743. [ 2.771129] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus n3
  744. [ 2.772060] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110
  745. [ 2.772956] xhci-hcd xhci-hcd.8.auto: irq 229, io mem 0xfe900000
  746. [ 2.773915] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  747. [ 2.774560] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  748. [ 2.775262] usb usb3: Product: xHCI Host Controller
  749. [ 2.775734] usb usb3: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  750. [ 2.776550] usb usb3: SerialNumber: xhci-hcd.8.auto
  751. [ 2.778102] hub 3-0:1.0: USB hub found
  752. [ 2.778514] hub 3-0:1.0: 1 port detected
  753. [ 2.779371] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  754. [ 2.780394] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus n4
  755. [ 2.781235] usb usb4: We don't know the algorithms for LPM for this host, di.
  756. [ 2.782219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  757. [ 2.782863] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  758. [ 2.783564] usb usb4: Product: xHCI Host Controller
  759. [ 2.784036] usb usb4: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  760. [ 2.784852] usb usb4: SerialNumber: xhci-hcd.8.auto
  761. [ 2.786671] hub 4-0:1.0: USB hub found
  762. [ 2.787099] hub 4-0:1.0: 1 port detected
  763. [ 2.792647] ehci-platform fe380000.usb: EHCI Host Controller
  764. [ 2.793517] ehci-platform fe380000.usb: new USB bus registered, assigned bus5
  765. [ 2.794475] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  766. [ 2.805841] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  767. [ 2.806702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  768. [ 2.807345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  769. [ 2.808047] usb usb5: Product: EHCI Host Controller
  770. [ 2.808518] usb usb5: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  771. [ 2.809334] usb usb5: SerialNumber: fe380000.usb
  772. [ 2.810574] hub 5-0:1.0: USB hub found
  773. [ 2.810984] hub 5-0:1.0: 1 port detected
  774. [ 2.812712] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  775. [ 2.813605] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus6
  776. [ 2.814599] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  777. [ 2.874480] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  778. [ 2.875164] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  779. [ 2.875902] usb usb6: Product: Generic Platform OHCI controller
  780. [ 2.876488] usb usb6: Manufacturer: Linux 4.4.167-1138-rockchip-ayufan-geff8d
  781. [ 2.877339] usb usb6: SerialNumber: fe3a0000.usb
  782. [ 2.879086] hub 6-0:1.0: USB hub found
  783. [ 2.879538] hub 6-0:1.0: 1 port detected
  784. [ 2.883054] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  785. [ 2.886283] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  786. [ 2.886977] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  787. [ 2.887665] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.sp2
  788. [ 2.888516] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -2
  789. [ 2.889652] asoc-simple-card: probe of spdif-sound failed with error -22
  790. [ 3.004529] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mappk
  791. [ 3.005348] asoc-simple-card es8316-sound: ASoC: no source widget found for 1
  792. [ 3.006180] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIASk
  793. [ 3.007086] asoc-simple-card es8316-sound: ASoC: no sink widget found for INP
  794. [ 3.007822] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic JacP
  795. [ 3.009419] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  796. [ 3.010172] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  797. [ 3.010946] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  798. [ 3.011626] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  799. [ 3.012328] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  800. [ 3.013013] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  801. [ 3.020882] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  802. [ 3.025335] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:20:38)
  803. [ 3.026263] of_cfs_init
  804. [ 3.026582] of_cfs_init: OK
  805. [ 3.053389] vcc3v3_pcie: disabling
  806. [ 3.054476] rk-keypad rockchip-key: no io-channels defined
  807. [ 3.055247] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  808. [ 3.057112] ALSA device list:
  809. [ 3.057399] #0: rockchip,es8316-codec
  810. [ 3.057978] ttyS2 - failed to request DMA, use interrupt mode
  811. [ 3.059076] Freeing unused kernel memory: 1152K
  812. [ 3.063159] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  813. Loading, please wait...
  814. starting version 237
  815. [ 3.327933] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  816. [ 3.328598] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  817. [ 3.329204] rockchip-pcie f8000000.pcie: missing "memory-region" property
  818. [ 3.329953] PCI host bridge /pcie@f8000000 ranges:
  819. [ 3.330467] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  820. [ 3.331087] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  821. [ 3.331885] rockchip-pcie f8000000.pcie: invalid power supply
  822. [ 3.392903] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  823. [ 3.393590] pci_bus 0000:00: root bus resource [bus 00-1f]
  824. [ 3.394220] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  825. [ 3.394897] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
  826. [ 3.396617] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
  827. [ 3.405959] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  828. [ 3.406617] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64b]
  829. [ 3.407352] pci 0000:00:00.0: PCI bridge to [bus 01]
  830. [ 3.407838] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  831. [ 3.408750] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  832. [ 3.409970] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  833. [ 3.410632] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  834. [ 3.412496] nvme 0000:01:00.0: enabling device (0000 -> 0002)
  835. Begin: Loading essential drivers ... done.
  836. Begin: Running /scripts/init-premount ... done.
  837. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  838. Begin: Running /scripts/local-premount ... [ 3.419785] dwmmc_rockchip fe3100.
  839. [ 3.420970] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mod.
  840. [ 3.421641] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  841. [ 3.422275] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  842. [ 3.422808] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bio
  843. [ 3.423682] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was.
  844. [ 3.424443] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  845. [ 3.424991] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  846. [ 3.425750] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  847. done.
  848. [ 3.441965] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  849. Warning: fsck not present, so skipping root file system
  850. [ 3.455547] EXT4-fs (mmcblk1p7): recovery complete
  851. [ 3.455993] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode)
  852. done.
  853. [ 3.457954] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  854. Begin: Running /scripts/local-bottom ... done.
  855. Begin: Running /scripts/init-bottom ... done.
  856. [ 3.509537] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  857. [ 3.511801] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  858. [ 3.513999] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  859. [ 3.517505] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  860. [ 3.533820] dwmmc_rockchip fe310000.dwmmc: Unexpected interrupt latency
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!