API tools faq
paste
Insei

eve nvidia jetson nano

Insei
Dec 14th, 2020 (edited)
105
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 93.56 KB | None | 0 0
raw download clone embed print report
  1. [0000.125] [L4T TegraBoot] (version 00.00.2018.01-l4t-c536fca9)
  2. [0000.131] Processing in cold boot mode Bootloader 2
  3. [0000.135] A02 Bootrom Patch rev = 1023
  4. [0000.139] Power-up reason: pmc por
  5. [0000.142] No Battery Present
  6. [0000.145] pmic max77620 reset reason
  7. [0000.148] pmic max77620 NVERC : 0x40
  8. [0000.151] RamCode = 0
  9. [0000.154] Platform has DDR4 type RAM
  10. [0000.157] max77620 disabling SD1 Remote Sense
  11. [0000.161] Setting DDR voltage to 1125mv
  12. [0000.165] Serial Number of Pmic Max77663: 0x831d6
  13. [0000.173] Entering ramdump check
  14. [0000.176] Get RamDumpCarveOut = 0x0
  15. [0000.179] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
  16. [0000.184] Last reboot was clean, booting normally!
  17. [0000.189] Sdram initialization is successful
  18. [0000.193] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
  19. [0000.199] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
  20. [0000.205] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
  21. [0000.211] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
  22. [0000.216] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
  23. [0000.222] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
  24. [0000.228] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
  25. [0000.234] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
  26. [0000.250] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
  27. [0000.256] Platform-DebugCarveout: 0
  28. [0000.259] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
  29. [0000.265] Non secure mode, and RB not enabled.
  30. [0000.269] Read GPT from (4:0)
  31. [0000.463] Csd NumOfBlocks=15759360
  32. [0000.467] Set High speed to 1
  33. [0000.476] Using GPT Primary to query partitions
  34. [0000.481] Loading Tboot-CPU binary
  35. [0000.490] Verifying TBC in OdmNonSecureSBK mode
  36. [0000.500] Bootloader load address is 0xa0000000, entry address is 0xa0000258
  37. [0000.507] Bootloader downloaded successfully.
  38. [0000.511] Downloaded Tboot-CPU binary to 0xa0000258
  39. [0000.516] MAX77620_GPIO5 configured
  40. [0000.520] CPU power rail is up
  41. [0000.523] CPU clock enabled
  42. [0000.526] Performing RAM repair
  43. [0000.529] Updating A64 Warmreset Address to 0xa00002e9
  44. [0000.534] Loading NvTbootBootloaderDTB
  45. [0000.559] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
  46. [0000.631] Bootloader DTB Load Address: 0x83000000
  47. [0000.636] Loading NvTbootKernelDTB
  48. [0000.660] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
  49. [0000.732] Kernel DTB Load Address: 0x83100000
  50. [0000.737] Loading cboot binary
  51. [0000.766] Verifying EBT in OdmNonSecureSBK mode
  52. [0000.808] Bootloader load address is 0x92c00000, entry address is 0x92c00258
  53. [0000.815] Bootloader downloaded successfully.
  54. [0000.819] Read PT from (2:0)
  55. [0000.835] Using BFS PT to query partitions
  56. [0000.839] PT: Partition NCT NOT found !
  57. [0000.842] Warning: Find Partition via PT Failed
  58. [0000.847] Next binary entry address: 0x92c00258
  59. [0000.851] BoardId: 3448
  60. [0000.856] Overriding pmu board id with proc board id
  61. [0000.860] Display board id is not available
  62. [0000.888] Verifying SC7EntryFw in OdmNonSecureSBK mode
  63. [0000.945] /bpmp deleted
  64. [0000.947] SC7EntryFw header found loaded at 0xff700000
  65. [0001.142] OVR2 PMIC
  66. [0001.144] Bpmp FW successfully loaded
  67. [0001.148] WB0 init successfully at 0xff780000
  68. [0001.152] Set NvDecSticky Bits
  69. [0001.156] GSC2 address ff53fffc value c0edbbcc
  70. [0001.162] GSC MC Settings done
  71. [0001.165] TOS Image length 53680
  72. [0001.168] Monitor size 53680
  73. [0001.171] OS size 0
  74. [0001.178] Secure Os AES-CMAC Verification Success!
  75. [0001.182] TOS image cipher info: plaintext
  76. [0001.186] Loading and Validation of Secure OS Successful
  77. [0001.202] SC7 Entry Firmware - 0xff700000, 0x4000
  78. [0001.207] NvTbootPackSdramParams: start.
  79. [0001.212] NvTbootPackSdramParams: done.
  80. [0001.216] Tegraboot started after 52355 us
  81. [0001.220] Basic modules init took 833731 us
  82. [0001.224] Sec Bootdevice Read Time = 12 ms, Read Size = 65 KB
  83. [0001.229] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
  84. [0001.235] Storage Device Read Time = 105 ms, Read Size = 2241 KB
  85. [0001.240] Storage Device Write Time = 0 ms, Write Size = 0 KB
  86. [0001.246] Next stage binary read took 24102 us
  87. [0001.250] Carveout took -35788 us
  88. [0001.253] CPU initialization took 370817 us
  89. [0001.257] Total time taken by TegraBoot 1192862 us
  90.  
  91. [0001.262] Starting CPU & Halting co-processor
  92.  
  93. 64NOTICE: BL31: v1.3(release):de895fd9e
  94. NOTICE: BL31: Built : 12:23:48, Oct 16 2020
  95. ERROR: Error initializing runtime service trusty_fast
  96. [0001.384] RamCode = 0
  97. [0001.389] LPDDR4 Training: Read DT: Number of tables = 2
  98. [0001.394] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
  99. [0001.407] EMC Training Successful
  100. [0001.410] 408000 not found in DVFS table
  101. [0001.416] RamCode = 0
  102. [0001.420] DT Write: emc-table@204000 succeeded
  103. [0001.425] DT Write: emc-table@1600000 succeeded
  104. [0001.429] LPDDR4 Training: Write DT: Number of tables = 2
  105. [0001.473]
  106. [0001.474] Debug Init done
  107. [0001.476] Marked DTB cacheable
  108. [0001.479] Bootloader DTB loaded at 0x83000000
  109. [0001.484] Marked DTB cacheable
  110. [0001.487] Kernel DTB loaded at 0x83100000
  111. [0001.491] DeviceTree Init done
  112. [0001.504] Pinmux applied successfully
  113. [0001.508] gicd_base: 0x50041000
  114. [0001.511] gicc_base: 0x50042000
  115. [0001.514] Interrupts Init done
  116. [0001.519] Using base:0x60005090 & irq:208 for tick-timer
  117. [0001.524] Using base:0x60005098 for delay-timer
  118. [0001.528] platform_init_timer: DONE
  119. [0001.532] Timer(tick) Init done
  120. [0001.535] osc freq = 38400 khz
  121. [0001.539]
  122. [0001.540] Welcome to L4T Cboot
  123. [0001.543]
  124. [0001.545] Cboot Version: 00.00.2018.01-t210-4686ce50
  125. [0001.549] calling constructors
  126. [0001.552] initializing heap
  127. [0001.555] initializing threads
  128. [0001.558] initializing timers
  129. [0001.561] creating bootstrap completion thread
  130. [0001.565] top of bootstrap2()
  131. [0001.568] CPU: ARM Cortex A57
  132. [0001.571] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
  133. [0001.576] initializing platform
  134. [0001.583] Manufacturer: MF = 0xc2, ID MSB = 0x25
  135. [0001.588] ID LSB = 0x36, ID-CFI len = 194 bytes
  136. [0001.592] Macronix QSPI chip present
  137. [0001.596] SPI device register
  138. [0001.599] init boot device
  139. [0001.601] allocating memory for boot device(SPI)
  140. [0001.606] registering boot device
  141. [0001.615] sdmmc node status = okay
  142. [0001.618] sdcard instance = 0
  143. [0001.621] sdcard gpio handle 0x5b
  144. [0001.625] sdcard gpio pin 0xc9
  145. [0001.627] sdcard gpio flags 0x0
  146. [0001.631] vmmc-supply 0x9e
  147. [0001.633] Instance: 0
  148. [0001.635] Allocating memory for context
  149. [0001.639] enabling clock
  150. [0001.641] sd card init
  151. [0001.644] Check card present and stable
  152. [0001.647] Send command 0
  153. [0001.664] Send command 3
  154. [0001.668] Set RCA for the card
  155. [0001.671] Query card specific data by command 9
  156. [0001.678] Parse CSD data
  157. [0001.680] Send command 7
  158. [0001.690] Calling sd device register
  159. [0001.694] Init sdcard
  160. [0001.696] Allocating memory for boot device
  161. [0001.700] Registering user device
  162. [0001.713] Enable APE clock
  163. [0001.716] Un-powergate APE partition
  164. [0001.719] of_register: registering tegra_udc to of_hal
  165. [0001.724] of_register: registering inv20628-driver to of_hal
  166. [0001.730] of_register: registering ads1015-driver to of_hal
  167. [0001.736] of_register: registering lp8557-bl-driver to of_hal
  168. [0001.741] of_register: registering bq2419x_charger to of_hal
  169. [0001.747] of_register: registering bq27441_fuel_gauge to of_hal
  170. [0001.759] gpio framework initialized
  171. [0001.762] of_register: registering tca9539_gpio to of_hal
  172. [0001.767] of_register: registering tca9539_gpio to of_hal
  173. [0001.773] of_register: registering i2c_bus_driver to of_hal
  174. [0001.778] of_register: registering i2c_bus_driver to of_hal
  175. [0001.784] of_register: registering i2c_bus_driver to of_hal
  176. [0001.789] pmic framework initialized
  177. [0001.793] of_register: registering max77620_pmic to of_hal
  178. [0001.798] regulator framework initialized
  179. [0001.802] of_register: registering tps65132_bl_driver to of_hal
  180. [0001.808] initializing target
  181. [0001.814] gpio_driver_register: register 'tegra_gpio_driver' driver
  182. [0001.822] board ID = D78, board SKU = 0
  183. [0001.826] Skipping Z3!
  184. [0001.831] fixed regulator driver initialized
  185. [0001.849] initializing OF layer
  186. [0001.852] NCK carveout not present
  187. [0001.855] Skipping dts_overrides
  188. [0001.859] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  189. [0001.876] I2C Bus Init done
  190. [0001.879] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  191. [0001.889] I2C Bus Init done
  192. [0001.892] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  193. [0001.902] I2C Bus Init done
  194. [0001.905] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  195. [0001.915] I2C Bus Init done
  196. [0001.918] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  197. [0001.928] I2C Bus Init done
  198. [0001.931] of_children_init: Ops found for compatible string maxim,max77620
  199. [0001.941] max77620_init using irq 118
  200. [0001.946] register 'maxim,max77620' pmic
  201. [0001.950] gpio_driver_register: register 'max77620-gpio' driver
  202. [0001.956] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
  203. [0001.967] I2C Bus Init done
  204. [0001.971] NCK carveout not present
  205. [0001.980] Find /i2c@7000c000's alias i2c0
  206. [0001.984] get eeprom at 1-a0, size 256, type 0
  207. [0001.993] Find /i2c@7000c500's alias i2c2
  208. [0001.997] get eeprom at 3-a0, size 256, type 0
  209. [0002.001] get eeprom at 3-ae, size 256, type 0
  210. [0002.006] pm_ids_update: Updating 1,a0, size 256, type 0
  211. [0002.011] I2C slave not started
  212. [0002.014] I2C write failed
  213. [0002.017] Writing offset failed
  214. [0002.020] eeprom_init: EEPROM read failed
  215. [0002.024] pm_ids_update: eeprom init failed
  216. [0002.028] pm_ids_update: Updating 3,a0, size 256, type 0
  217. [0002.058] pm_ids_update: The pm board id is 3448-0000-400
  218. [0002.065] Adding plugin-manager/ids/3448-0000-400=/i2c@7000c500:module@0x50
  219. [0002.073] pm_ids_update: pm id update successful
  220. [0002.078] pm_ids_update: Updating 3,ae, size 256, type 0
  221. [0002.108] pm_ids_update: The pm board id is 3449-0000-400
  222. [0002.114] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
  223. [0002.122] pm_ids_update: pm id update successful
  224. [0002.152] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  225. [0002.158] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
  226. [0002.166] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  227. [0002.172] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
  228. [0002.180] updating /chosen/nvidia,ethernet-mac node 00:04:4b:ec:92:5f
  229. [0002.187] Plugin Manager: Parse ODM data 0x00094000
  230. [0002.199] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000
  231. [0002.214] Find /i2c@7000c000's alias i2c0
  232. [0002.218] get eeprom at 1-a0, size 256, type 0
  233. [0002.227] Find /i2c@7000c500's alias i2c2
  234. [0002.230] get eeprom at 3-a0, size 256, type 0
  235. [0002.235] get eeprom at 3-ae, size 256, type 0
  236. [0002.239] pm_ids_update: Updating 1,a0, size 256, type 0
  237. [0002.245] I2C slave not started
  238. [0002.248] I2C write failed
  239. [0002.250] Writing offset failed
  240. [0002.253] eeprom_init: EEPROM read failed
  241. [0002.257] pm_ids_update: eeprom init failed
  242. [0002.261] pm_ids_update: Updating 3,a0, size 256, type 0
  243. [0002.291] pm_ids_update: The pm board id is 3448-0000-400
  244. [0002.298] Adding plugin-manager/ids/3448-0000-400=/i2c@7000c500:module@0x50
  245. [0002.305] pm_ids_update: pm id update successful
  246. [0002.309] pm_ids_update: Updating 3,ae, size 256, type 0
  247. [0002.339] pm_ids_update: The pm board id is 3449-0000-400
  248. [0002.345] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
  249. [0002.352] pm_ids_update: pm id update successful
  250. [0002.383] Add serial number:1423719090761 as DT property
  251. [0002.390] Applying platform configs
  252. [0002.397] platform-init is not present. Skipping
  253. [0002.402] calling apps_init()
  254. [0002.427] Found 16 GPT partitions in "sd0"
  255. [0002.431] Proceeding to Cold Boot
  256. [0002.434] starting app android_boot_app
  257. [0002.438] Device state: unlocked
  258. [0002.441] display console init
  259. [0002.449] could not find regulator
  260. [0002.452] hdmi cable connected
  261. [0002.468] edid read success
  262. [0002.484] DT entry for leds-pwm not found
  263. [0002.488] edid read success
  264. [0002.491] width = 640, height = 480, frequency = 25174825
  265. [0002.496] width = 640, height = 480, frequency = 25174825
  266. [0002.502] width = 640, height = 480, frequency = 25174825
  267. [0002.507] width = 640, height = 480, frequency = 25174825
  268. [0002.512] width = 1920, height = 1080, frequency = 148500000
  269. [0002.518] width = 720, height = 480, frequency = 27000000
  270. [0002.523] width = 1920, height = 1080, frequency = 148351648
  271. [0002.529] width = 1920, height = 1080, frequency = 148351648
  272. [0002.535] width = 1280, height = 720, frequency = 74175824
  273. [0002.540] width = 1280, height = 720, frequency = 74175824
  274. [0002.546] width = 720, height = 480, frequency = 26973026
  275. [0002.551] width = 720, height = 576, frequency = 26973026
  276. [0002.556] width = 720, height = 480, frequency = 26973026
  277. [0002.562] width = 720, height = 576, frequency = 26973026
  278. [0002.567] width = 640, height = 480, frequency = 25174825
  279. [0002.573] Best mode Width = 1920, Height = 1080, freq = 148351648
  280. [0002.580] tmds-config node not found
  281. [0002.584] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts
  282. [0002.599] setting 'vdd-1v8' regulator to 1800000 micro volts
  283. [0002.607] could not find regulator
  284. [0002.610] could not find regulator
  285. [0002.613] could not find regulator
  286. [0002.642] using default cmu settings
  287. [0002.645] dc_hdmi_enable, starting HDMI initialisation
  288. [0002.651] dc_hdmi_enable, HDMI initialisation complete
  289. [0002.656] list and configure display window
  290. [0002.665] display console init completed
  291. [0002.676] subnode volume_up is not found !
  292. [0002.680] subnode back is not found !
  293. [0002.684] subnode volume_down is not found !
  294. [0002.688] subnode menu is not found !
  295. [0002.692] Gpio keyboard init success
  296. [0002.735] found decompressor handler: lz4-legacy
  297. [0002.750] decompressing blob (type 1)...
  298. [0002.785] load_bmp_blob: panelresolution=1080 type=3
  299. [0002.805] blob_init: RP4 partition does not have valid Blob
  300. [0002.811] load_firmware_blob: Firmware blob initialization failed
  301. [0002.817] Could not load/initialize FW partition... ignoring
  302. [0002.822] -------> se_aes_verify_sbk_clear: 747
  303. [0002.827] se_aes_verify_sbk_clear: Error
  304. [0002.831] bl_battery_charging: connected to external power supply
  305. [0002.838] xusb is supported
  306. [0002.844] error while finding nvidia,portmap
  307. [0003.348] firmware blob is not loaded and initialized
  308. [0003.353] no usb firmware found on blob
  309. [0003.357] xhci0: Could not load usb firmware
  310. [0003.371] xhci0: WARNING: Probe and attach failed!
  311. [0003.376] failed to init xhci or no usb device attached
  312. [0003.386] device_query_partition_size: failed to open partition sd0:MSC !
  313. [0003.393] MSC Partition not found
  314. [0003.399] device_query_partition_size: failed to open partition sd0:USP !
  315. [0003.406] USP partition read failed!
  316. [0003.409] blob_init: blob-partition USP header read failed
  317. [0003.415] android_boot Unable to update recovery partition
  318. [0003.420] kfs_getpartname: name = LNX
  319. [0003.424] Loading kernel from LNX
  320. [0003.563] load kernel from storage
  321. [0003.575] decompressor handler not found
  322. [0003.649] Successfully loaded kernel and ramdisk images
  323. [0003.655] load_bmp_blob: panelresolution=1080 type=3
  324. [0004.151] display bmp image done
  325. [0004.154] NCK carveout not present
  326. [0004.157] Skipping dts_overrides
  327. [0004.160] NCK carveout not present
  328. [0004.170] Find /i2c@7000c000's alias i2c0
  329. [0004.174] get eeprom at 1-a0, size 256, type 0
  330. [0004.183] Find /i2c@7000c500's alias i2c2
  331. [0004.187] get eeprom at 3-a0, size 256, type 0
  332. [0004.191] get eeprom at 3-ae, size 256, type 0
  333. [0004.196] pm_ids_update: Updating 1,a0, size 256, type 0
  334. [0004.201] I2C slave not started
  335. [0004.204] I2C write failed
  336. [0004.207] Writing offset failed
  337. [0004.210] eeprom_init: EEPROM read failed
  338. [0004.214] pm_ids_update: eeprom init failed
  339. [0004.218] pm_ids_update: Updating 3,a0, size 256, type 0
  340. [0004.248] pm_ids_update: The pm board id is 3448-0000-400
  341. [0004.255] Adding plugin-manager/ids/3448-0000-400=/i2c@7000c500:module@0x50
  342. [0004.263] pm_ids_update: pm id update successful
  343. [0004.268] pm_ids_update: Updating 3,ae, size 256, type 0
  344. [0004.298] pm_ids_update: The pm board id is 3449-0000-400
  345. [0004.304] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57
  346. [0004.312] pm_ids_update: pm id update successful
  347. [0004.343] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  348. [0004.348] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
  349. [0004.356] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
  350. [0004.362] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
  351. [0004.371] updating /chosen/nvidia,ethernet-mac node 00:04:4b:ec:92:5f
  352. [0004.377] Plugin Manager: Parse ODM data 0x00094000
  353. [0004.389] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000
  354. [0004.398] Add serial number:1423719090761 as DT property
  355. [0004.407] "bpmp" doesn't exist, creating
  356. [0004.412] Updated bpmp info to DTB
  357. [0004.417] Updated initrd info to DTB
  358. [0004.421] "proc-board" doesn't exist, creating
  359. [0004.427] Updated board info to DTB
  360. [0004.430] "pmu-board" doesn't exist, creating
  361. [0004.436] Updated board info to DTB
  362. [0004.439] "display-board" doesn't exist, creating
  363. [0004.445] Updated board info to DTB
  364. [0004.449] "reset" doesn't exist, creating
  365. [0004.453] Updated reset info to DTB
  366. [0004.457] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1
  367. [0004.496] DTB cmdline: earlycon=uart8250,mmio32,0x70006000
  368. [0004.501] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
  369. [0004.514] Updated bootarg info to DTB
  370. [0004.518] Adding uuid 000000016450470104000000080204c0 to DT
  371. [0004.524] Adding eks info 0 to DT
  372. [0004.530] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
  373. [0004.536] Updated memory info to DTB
  374. [0004.544] set vdd_core voltage to 1125 mv
  375. [0004.547] setting 'vdd-core' regulator to 1125000 micro volts
  376. [0004.553] Found secure-pmc; disable BPMP
  377.  
  378.  
  379. U-Boot 2021.01-rc3-00006-g80cbd731df (Dec 02 2020 - 20:09:26 +0300)
  380.  
  381. SoC: tegra210
  382. Model: NVIDIA Jetson Nano Developer Kit
  383. Board: NVIDIA P3450-0000
  384. DRAM: 4 GiB
  385. MMC: sdhci@700b0000: 1, sdhci@700b0600: 0
  386. Loading Environment from SPIFlash... SF: Detected mx25u3235f with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  387. *** Warning - bad CRC, using default environment
  388.  
  389. In: serial
  390. Out: serial
  391. Err: serial
  392. Net: No ethernet found.
  393. Hit any key to stop autoboot: 0
  394. switch to partitions #0, OK
  395. mmc1 is current device
  396. Scanning mmc 1:1...
  397. ** Unable to read file / **
  398. Failed to load '/'
  399. Scanning disk [email protected]...
  400. ** Unrecognized filesystem type **
  401. ** Unrecognized filesystem type **
  402. ** Unrecognized filesystem type **
  403. ** Unrecognized filesystem type **
  404. ** Unrecognized filesystem type **
  405. ** Unrecognized filesystem type **
  406. ** Unrecognized filesystem type **
  407. ** Unrecognized filesystem type **
  408. ** Unrecognized filesystem type **
  409. ** Unrecognized filesystem type **
  410. ** Unrecognized filesystem type **
  411. ** Unrecognized filesystem type **
  412. ** Unrecognized filesystem type **
  413. ** Unrecognized filesystem type **
  414. Card did not respond to voltage select! : -110
  415. Scanning disk [email protected]...
  416. Disk [email protected] not ready
  417. Found 17 disks
  418. ** Unable to read file ubootefi.var **
  419. Failed to load EFI variables
  420. copying carveout for /host1x@50000000/dc@54200000...
  421. copying carveout for /host1x@50000000/dc@54240000...
  422. BootOrder not defined
  423. EFI boot manager: Cannot load any image
  424. Found EFI removable media binary efi/boot/bootaa64.efi
  425. 1090048 bytes read in 68 ms (15.3 MiB/s)
  426. copying carveout for /host1x@50000000/dc@54200000...
  427. copying carveout for /host1x@50000000/dc@54240000...
  428. Booting /efi\boot\bootaa64.efi
  429. Welcome to GRUB!
  430.  
  431.  
  432. error: failed to retrieve the structure field.
  433.  
  434. GNU GRUB version 2.03
  435.  
  436. ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
  437. │ Boot 0.0.0-nvidia-jetson-nano-e7f6a966-xen-arm64 │
  438. │*Set Boot Options │
  439. │ │
  440. │ │
  441. │ │
  442. │ │
  443. │ │
  444. │ │
  445. │ │
  446. │ │
  447. │ │
  448. │ │
  449. │ │
  450. │ │
  451. │ │
  452. │ │
  453. │ │
  454. │ │
  455. │ │
  456. │ │
  457. │ │
  458. │ │
  459. │ │
  460. │ │
  461. │ │
  462. │ │
  463. │ │
  464. │ │
  465. │ │
  466. │ │
  467. │ │
  468. │ │
  469. │ │
  470. │ │
  471. │ │
  472. │ │
  473. │ │
  474. │ │
  475. │ │
  476. │ │
  477. │ │
  478. │ │
  479. │ │
  480. │ │
  481. │ │
  482. │ │
  483. │ │
  484. │ │
  485. │ │
  486. │ │
  487. │ │
  488. │ │
  489. └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
  490.  
  491. Use the ▲ and ▼ keys to select which entry is highlighted.
  492. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu.
  493.  
  494. GNU GRUB version 2.03
  495.  
  496. ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
  497. │ force serial console on x86/baremetal com1 │
  498. │ set x86/baremetal boot options │
  499. │ set x86/qemu boot options │
  500. │ set ARM/baremetal boot options │
  501. │ set ARM/qemu boot options │
  502. │*skip hypervisor booting │
  503. │ show boot options │
  504. │ │
  505. │ │
  506. │ │
  507. │ │
  508. │ │
  509. │ │
  510. │ │
  511. │ │
  512. │ │
  513. │ │
  514. │ │
  515. │ │
  516. │ │
  517. │ │
  518. │ │
  519. │ │
  520. │ │
  521. │ │
  522. │ │
  523. │ │
  524. │ │
  525. │ │
  526. │ │
  527. │ │
  528. │ │
  529. │ │
  530. │ │
  531. │ │
  532. │ │
  533. │ │
  534. │ │
  535. │ │
  536. │ │
  537. │ │
  538. │ │
  539. │ │
  540. │ │
  541. │ │
  542. │ │
  543. │ │
  544. │ │
  545. │ │
  546. │ │
  547. │ │
  548. │ │
  549. └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
  550.  
  551. Use the ▲ and ▼ keys to select which entry is highlighted.
  552. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu.
  553.  
  554. GNU GRUB version 2.03
  555.  
  556. ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
  557. │*force serial console on x86/baremetal com1 │
  558. │ set x86/baremetal boot options │
  559. │ set x86/qemu boot options │
  560. │ set ARM/baremetal boot options │
  561. │ set ARM/qemu boot options │
  562. │ skip hypervisor booting │
  563. │ show boot options │
  564. │ │
  565. │ │
  566. │ │
  567. │ │
  568. │ │
  569. │ │
  570. │ │
  571. │ │
  572. │ │
  573. │ │
  574. │ │
  575. │ │
  576. │ │
  577. │ │
  578. │ │
  579. │ │
  580. │ │
  581. │ │
  582. │ │
  583. │ │
  584. │ │
  585. │ │
  586. │ │
  587. │ │
  588. │ │
  589. │ │
  590. │ │
  591. │ │
  592. │ │
  593. │ │
  594. │ │
  595. │ │
  596. │ │
  597. │ │
  598. │ │
  599. │ │
  600. │ │
  601. │ │
  602. │ │
  603. │ │
  604. │ │
  605. │ │
  606. │ │
  607. │ │
  608. │ │
  609. └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
  610.  
  611. Use the ▲ and ▼ keys to select which entry is highlighted.
  612. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu.
  613.  
  614. GNU GRUB version 2.03
  615.  
  616. ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
  617. │*Boot 0.0.0-nvidia-jetson-nano-e7f6a966-xen-arm64 │
  618. │ Set Boot Options │
  619. │ │
  620. │ │
  621. │ │
  622. │ │
  623. │ │
  624. │ │
  625. │ │
  626. │ │
  627. │ │
  628. │ │
  629. │ │
  630. │ │
  631. │ │
  632. │ │
  633. │ │
  634. │ │
  635. │ │
  636. │ │
  637. │ │
  638. │ │
  639. │ │
  640. │ │
  641. │ │
  642. │ │
  643. │ │
  644. │ │
  645. │ │
  646. │ │
  647. │ │
  648. │ │
  649. │ │
  650. │ │
  651. │ │
  652. │ │
  653. │ │
  654. │ │
  655. │ │
  656. │ │
  657. │ │
  658. │ │
  659. │ │
  660. │ │
  661. │ │
  662. │ │
  663. │ │
  664. │ │
  665. │ │
  666. │ │
  667. │ │
  668. │ │
  669. └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
  670.  
  671. Use the ▲ and ▼ keys to select which entry is highlighted.
  672. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu.
  673. /boot/xen.efi console=dtuart sync_console dom0_mem=750M,max:750M dom0_max_vcpus=1 dom0_vcpus_pin
  674. EFI stub: Booting Linux Kernel...
  675. EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
  676. EFI stub: Using DTB from configuration table
  677. EFI stub: Exiting boot services and installing virtual address map...
  678. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd071]
  679. [ 0.000000] Linux version 5.4.51-default (root@f30c2c4999a1) (gcc version 8.3.0 (Alpine 8.3.0)) #1 SMP Wed Nov 25 15:56:55 UTC 2020
  680. [ 0.000000] Machine model: NVIDIA Jetson Nano Developer Kit
  681. [ 0.000000] Warning: PCIe ACS overrides enabled; This may allow non-IOMMU protected peer-to-peer DMA
  682. [ 0.000000] efi: Getting EFI parameters from FDT:
  683. [ 0.000000] efi: EFI v2.80 by Das U-Boot
  684. [ 0.000000] efi: SMBIOS=0xfb5ce000 MEMRESERVE=0xfb4b4040
  685. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  686. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  687. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  688. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  689. [ 0.000000] NUMA: No NUMA configuration found
  690. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017f1fffff]
  691. [ 0.000000] NUMA: NODE_DATA [mem 0x17e91f300-0x17e922fff]
  692. [ 0.000000] Zone ranges:
  693. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
  694. [ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
  695. [ 0.000000] Normal [mem 0x0000000100000000-0x000000017f1fffff]
  696. [ 0.000000] Movable zone start for each node
  697. [ 0.000000] Early memory node ranges
  698. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afffffff]
  699. [ 0.000000] node 0: [mem 0x00000000b0200000-0x00000000fb4b6fff]
  700. [ 0.000000] node 0: [mem 0x00000000fb4b7000-0x00000000fb4b8fff]
  701. [ 0.000000] node 0: [mem 0x00000000fb4b9000-0x00000000fb5c5fff]
  702. [ 0.000000] node 0: [mem 0x00000000fb5c6000-0x00000000fb5ccfff]
  703. [ 0.000000] node 0: [mem 0x00000000fb5cd000-0x00000000fb5cdfff]
  704. [ 0.000000] node 0: [mem 0x00000000fb5ce000-0x00000000fb5d1fff]
  705. [ 0.000000] node 0: [mem 0x00000000fb5d2000-0x00000000fb5d2fff]
  706. [ 0.000000] node 0: [mem 0x00000000fb5d3000-0x00000000fb5d7fff]
  707. [ 0.000000] node 0: [mem 0x00000000fb5d8000-0x00000000fb5d8fff]
  708. [ 0.000000] node 0: [mem 0x00000000fb5d9000-0x00000000fb5d9fff]
  709. [ 0.000000] node 0: [mem 0x00000000fb5da000-0x00000000fb5dafff]
  710. [ 0.000000] node 0: [mem 0x00000000fb5db000-0x00000000fb5dbfff]
  711. [ 0.000000] node 0: [mem 0x00000000fb5dc000-0x00000000fb5dcfff]
  712. [ 0.000000] node 0: [mem 0x00000000fb5dd000-0x00000000fb5ddfff]
  713. [ 0.000000] node 0: [mem 0x00000000fb5de000-0x00000000fb5defff]
  714. [ 0.000000] node 0: [mem 0x00000000fb5df000-0x00000000fb5dffff]
  715. [ 0.000000] node 0: [mem 0x00000000fb5e0000-0x00000000fb5e0fff]
  716. [ 0.000000] node 0: [mem 0x00000000fb5e1000-0x00000000fb5e1fff]
  717. [ 0.000000] node 0: [mem 0x00000000fb5e2000-0x00000000fb5e2fff]
  718. [ 0.000000] node 0: [mem 0x00000000fb5e3000-0x00000000fb5e3fff]
  719. [ 0.000000] node 0: [mem 0x00000000fb5e4000-0x00000000fb5e4fff]
  720. [ 0.000000] node 0: [mem 0x00000000fb5e5000-0x00000000fb5e5fff]
  721. [ 0.000000] node 0: [mem 0x00000000fb5e6000-0x00000000fb5e6fff]
  722. [ 0.000000] node 0: [mem 0x00000000fb5e7000-0x00000000fb5e7fff]
  723. [ 0.000000] node 0: [mem 0x00000000fb5e8000-0x00000000fb5e8fff]
  724. [ 0.000000] node 0: [mem 0x00000000fb5e9000-0x00000000fb5e9fff]
  725. [ 0.000000] node 0: [mem 0x00000000fb5ea000-0x00000000fb5eafff]
  726. [ 0.000000] node 0: [mem 0x00000000fb5eb000-0x00000000fb5ebfff]
  727. [ 0.000000] node 0: [mem 0x00000000fb5ec000-0x00000000fb5ecfff]
  728. [ 0.000000] node 0: [mem 0x00000000fb5ed000-0x00000000fb5edfff]
  729. [ 0.000000] node 0: [mem 0x00000000fb5ee000-0x00000000fb5eefff]
  730. [ 0.000000] node 0: [mem 0x00000000fb5ef000-0x00000000fb5effff]
  731. [ 0.000000] node 0: [mem 0x00000000fb5f0000-0x00000000fb5f0fff]
  732. [ 0.000000] node 0: [mem 0x00000000fb5f1000-0x00000000fb5f1fff]
  733. [ 0.000000] node 0: [mem 0x00000000fb5f2000-0x00000000fb5f2fff]
  734. [ 0.000000] node 0: [mem 0x00000000fb5f3000-0x00000000fb5f3fff]
  735. [ 0.000000] node 0: [mem 0x00000000fb5f4000-0x00000000fb5f4fff]
  736. [ 0.000000] node 0: [mem 0x00000000fb5f5000-0x00000000fb5f5fff]
  737. [ 0.000000] node 0: [mem 0x00000000fb5f6000-0x00000000fb5f7fff]
  738. [ 0.000000] node 0: [mem 0x00000000fb5f8000-0x00000000fb5f8fff]
  739. [ 0.000000] node 0: [mem 0x00000000fb5f9000-0x00000000fed3ffff]
  740. [ 0.000000] node 0: [mem 0x00000000fed40000-0x00000000fed4ffff]
  741. [ 0.000000] node 0: [mem 0x00000000fed50000-0x00000000fedfffff]
  742. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017f1fffff]
  743. [ 0.000000] Zeroed struct page in unavailable ranges: 50 pages
  744. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017f1fffff]
  745. [ 0.000000] psci: probing for conduit method from DT.
  746. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  747. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  748. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  749. [ 0.000000] psci: SMC Calling Convention v1.1
  750. [ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
  751. [ 0.000000] Detected PIPT I-cache on CPU0
  752. [ 0.000000] CPU features: detected: ARM erratum 832075
  753. [ 0.000000] CPU features: detected: ARM erratum 834220
  754. [ 0.000000] CPU features: detected: EL2 vector hardening
  755. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  756. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1023544
  757. [ 0.000000] Policy zone: Normal
  758. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel console=tty0 console=ttyS0,115200 console=hvc0 root=PARTUUID=2945dfab-77a8-45e6-90a0-9ab848c7be83 dom0_mem=750M,max:750M dom0_max_vcpus=1 dom0_vcpus_pin eve_mem=600M,max:600M eve_max_vcpus=1 ctrd_mem=350M,max:350M ctrd_max_vcpus=1 change=500 rootdelay=3 pcie_acs_override=downstream,multifunction
  759. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  760. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  761. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  762. [ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
  763. [ 0.000000] Memory: 2622956K/4159488K available (12604K kernel code, 1830K rwdata, 5852K rodata, 4608K init, 762K bss, 583844K reserved, 0K cma-reserved)
  764. [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x40/0x580 with crng_init=0
  765. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  766. [ 0.000000] rcu: Hierarchical RCU implementation.
  767. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=480 to nr_cpu_ids=4.
  768. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  769. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  770. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  771. [ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
  772. [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
  773. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  774. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  775. [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  776. [ 0.000089] tegra-timer: failed to map irq for cpu0
  777. [ 0.000114] Failed to initialize '/timer@60005000': -22
  778. [ 0.003214] Console: colour dummy device 80x25
  779. [ 0.003670] printk: console [tty0] enabled
  780. [ 0.003707] serial port 0 not yet initialized
  781. [ 0.003827] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  782. [ 0.003847] pid_max: default: 32768 minimum: 301
  783. [ 0.003942] LSM: Security Framework initializing
  784. [ 0.004058] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  785. [ 0.004139] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  786. [ 0.006106] ASID allocator initialised with 32768 entries
  787. [ 0.006238] rcu: Hierarchical SRCU implementation.
  788. [ 0.015519] Speedo Revision 4
  789. [ 0.015545] Tegra210: unknown SKU 0x8f
  790. [ 0.015572] Tegra Revision: A02 SKU: 143 CPU Process: 0 SoC Process: 0
  791. [ 0.016544] tegra-pmc: access to PMC is restricted to TZ
  792. [ 0.016593] Remapping and enabling EFI services.
  793. [ 0.017201] smp: Bringing up secondary CPUs ...
  794. [ 0.017868] Detected PIPT I-cache on CPU1
  795. [ 0.017939] CPU1: Booted secondary processor 0x0000000001 [0x411fd071]
  796. [ 0.018685] Detected PIPT I-cache on CPU2
  797. [ 0.018720] CPU2: Booted secondary processor 0x0000000002 [0x411fd071]
  798. [ 0.019347] Detected PIPT I-cache on CPU3
  799. [ 0.019382] CPU3: Booted secondary processor 0x0000000003 [0x411fd071]
  800. [ 0.019455] smp: Brought up 1 node, 4 CPUs
  801. [ 0.019495] SMP: Total of 4 processors activated.
  802. [ 0.019504] CPU features: detected: 32-bit EL0 Support
  803. [ 0.019513] CPU features: detected: CRC32 instructions
  804. [ 0.041943] CPU: All CPU(s) started at EL2
  805. [ 0.042051] alternatives: patching kernel code
  806. [ 0.089036] node 0 initialised, 238172 pages in 40ms
  807. [ 0.091384] devtmpfs: initialized
  808. [ 0.116509] Enabled cp15_barrier support
  809. [ 0.116551] Enabled setend support
  810. [ 0.117071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  811. [ 0.117103] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  812. [ 0.117466] pinctrl core: initialized pinctrl subsystem
  813. [ 0.122309] SMBIOS 3.0 present.
  814. [ 0.122342] DMI: , BIOS 2021.01-rc3-00006-g80cbd731df 12/02/2020
  815. [ 0.123006] NET: Registered protocol family 16
  816. [ 0.123690] DMA: preallocated 256 KiB pool for atomic allocations
  817. [ 0.123718] audit: initializing netlink subsys (disabled)
  818. [ 0.123938] audit: type=2000 audit(0.120:1): state=initialized audit_enabled=0 res=1
  819. [ 0.127244] cpuidle: using governor ladder
  820. [ 0.127272] cpuidle: using governor menu
  821. [ 0.127684] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  822. [ 0.131223] Serial: AMBA PL011 UART driver
  823. [ 0.152563] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
  824. [ 0.178346] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  825. [ 0.178373] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  826. [ 0.178384] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  827. [ 0.178394] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  828. [ 0.180454] cryptd: max_cpu_qlen set to 1000
  829. [ 0.184778] GPIO line 151 (camera-control-output-low) hogged as output/low
  830. [ 0.184811] GPIO line 152 (camera-control-output-low) hogged as output/low
  831. [ 0.184839] GPIO line 6 (system-suspend-gpio) hogged as output/high
  832. [ 0.191658] ACPI: Interpreter disabled.
  833. [ 0.193300] vdd-5v0-hdmi: supplied by vdd-5v0-sys
  834. [ 0.193774] vdd-fan: supplied by vdd-5v0-sys
  835. [ 0.194061] vdd-usb-vbus: supplied by vdd-5v0-sys
  836. [ 0.194969] iommu: Default domain type: Translated
  837. [ 0.195474] vgaarb: loaded
  838. [ 0.196003] SCSI subsystem initialized
  839. [ 0.196514] usbcore: registered new interface driver usbfs
  840. [ 0.196561] usbcore: registered new interface driver hub
  841. [ 0.196630] usbcore: registered new device driver usb
  842. [ 0.197183] pps_core: LinuxPPS API ver. 1 registered
  843. [ 0.197194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  844. [ 0.197215] PTP clock support registered
  845. [ 0.197402] EDAC MC: Ver: 3.0.0
  846. [ 0.197829] Registered efivars operations
  847. [ 0.198791] NetLabel: Initializing
  848. [ 0.198808] NetLabel: domain hash size = 128
  849. [ 0.198816] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  850. [ 0.198883] NetLabel: unlabeled traffic allowed by default
  851. [ 0.201175] clocksource: Switched to clocksource arch_sys_counter
  852. [ 0.201588] VFS: Disk quotas dquot_6.6.0
  853. [ 0.201677] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  854. [ 0.202356] pnp: PnP ACPI: disabled
  855. [ 0.207977] thermal_sys: Registered thermal governor 'fair_share'
  856. [ 0.207983] thermal_sys: Registered thermal governor 'bang_bang'
  857. [ 0.208007] thermal_sys: Registered thermal governor 'step_wise'
  858. [ 0.208016] thermal_sys: Registered thermal governor 'user_space'
  859. [ 0.209121] NET: Registered protocol family 2
  860. [ 0.209740] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  861. [ 0.209807] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  862. [ 0.210028] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  863. [ 0.210590] TCP: Hash tables configured (established 32768 bind 32768)
  864. [ 0.210839] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  865. [ 0.210936] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  866. [ 0.211769] NET: Registered protocol family 1
  867. [ 0.211831] PCI: CLS 0 bytes, default 64
  868. [ 0.213181] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  869. [ 0.213964] kvm [1]: IPA Size Limit: 44bits
  870. [ 0.214769] kvm [1]: Hyp mode initialized successfully
  871. [ 0.220683] Initialise system trusted keyrings
  872. [ 0.220875] workingset: timestamp_bits=40 max_order=20 bucket_order=0
  873. [ 0.226057] zbud: loaded
  874. [ 0.227730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  875. [ 0.228273] 9p: Installing v9fs 9p2000 file system support
  876. [ 0.242512] Key type asymmetric registered
  877. [ 0.242534] Asymmetric key parser 'x509' registered
  878. [ 0.242589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  879. [ 0.242776] io scheduler mq-deadline registered
  880. [ 0.242788] io scheduler kyber registered
  881. [ 0.242937] io scheduler bfq registered
  882. [ 0.250221] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  883. [ 0.265594] tegra124-dfll 70110000.clock: Missing step or alignment info for PWM regulator
  884. [ 0.266691] tegra124-dfll: probe of 70110000.clock failed with error -22
  885. [ 0.274155] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
  886. [ 0.276576] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  887. [ 0.284453] Serial: AMBA driver
  888. [ 0.285384] msm_serial: driver initialized
  889. [ 0.296480] brd: module loaded
  890. [ 0.306485] loop: module loaded
  891. [ 0.339846] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
  892. [ 0.339884] drbd: built-in
  893. [ 0.339892] drbd: registered as block device major 147
  894. [ 0.343626] libphy: Fixed MDIO Bus: probed
  895. [ 0.343650] tun: Universal TUN/TAP device driver, 1.6
  896. [ 0.345016] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  897. [ 0.345434] usbcore: registered new interface driver usb-storage
  898. [ 0.345687] mousedev: PS/2 mouse device common for all mice
  899. [ 0.350438] bcm2835-cpufreq:bcm2835_cpufreq_driver_init:141: Firmware is not available
  900. [ 0.350513] bcm2835-cpufreq:bcm2835_cpufreq_driver_init:141: Firmware is not available
  901. [ 0.350559] bcm2835-cpufreq:bcm2835_cpufreq_driver_init:141: Firmware is not available
  902. [ 0.350602] bcm2835-cpufreq:bcm2835_cpufreq_driver_init:141: Firmware is not available
  903. [ 0.351421] sdhci: Secure Digital Host Controller Interface driver
  904. [ 0.351433] sdhci: Copyright(c) Pierre Ossman
  905. [ 0.351718] sdhci-pltfm: SDHCI platform and OF driver helper
  906. [ 0.352661] ledtrig-cpu: registered to indicate activity on CPUs
  907. [ 0.353166] EFI Variables Facility v0.08 2004-May-17
  908. [ 0.354204] hidraw: raw HID events driver (C) Jiri Kosina
  909. [ 0.354325] usbcore: registered new interface driver usbhid
  910. [ 0.354335] usbhid: USB HID core driver
  911. [ 0.358445] xt_time: kernel timezone is -0000
  912. [ 0.358500] IPVS: Registered protocols ()
  913. [ 0.358553] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  914. [ 0.358807] IPVS: ipvs loaded.
  915. [ 0.358945] ipip: IPv4 and MPLS over IPv4 tunneling driver
  916. [ 0.359454] gre: GRE over IPv4 demultiplexor driver
  917. [ 0.359874] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  918. [ 0.359994] Initializing XFRM netlink socket
  919. [ 0.360549] NET: Registered protocol family 10
  920. [ 0.361736] Segment Routing with IPv6
  921. [ 0.362733] NET: Registered protocol family 17
  922. [ 0.362772] NET: Registered protocol family 15
  923. [ 0.362846] Bridge firewalling registered
  924. [ 0.363004] 8021q: 802.1Q VLAN Support v1.8
  925. [ 0.363143] 9pnet: Installing 9P2000 support
  926. [ 0.363230] Key type dns_resolver registered
  927. [ 0.364090] registered taskstats version 1
  928. [ 0.364107] Loading compiled-in X.509 certificates
  929. [ 0.368267] Loaded X.509 cert 'Build time autogenerated kernel key: 03b6644ce56be83e149c31a1b4613505d053436f'
  930. [ 0.368917] Key type ._fscrypt registered
  931. [ 0.368931] Key type .fscrypt registered
  932. [ 0.389450] tegra-aconnect aconnect@702c0000: ignoring dependency for device, assuming no driver
  933. [ 0.390091] tegra-pcie 1003000.pcie: ignoring dependency for device, assuming no driver
  934. [ 0.390601] of_serial 70006000.serial: ignoring dependency for device, assuming no driver
  935. [ 0.391657] printk: console [ttyS0] disabled
  936. [ 0.391767] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 59, base_baud = 25500000) is a Tegra
  937. [ 1.914399] printk: console [ttyS0] enabled
  938. [ 1.919599] hctosys: unable to open rtc device (rtc0)
  939. [ 1.926072] Waiting 3 sec before mounting root device...
  940.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!