phil@philinux:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xb4, date = 2019-04-01
[    0.000000] Linux version 4.15.0-54-generic (buildd@lgw01-amd64-014) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 (Ubuntu 4.15.0-54.58-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-54-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006f816fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f817000-0x000000006f817fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006f818000-0x000000006f818fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f819000-0x0000000071151fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000071152000-0x0000000072251fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000072252000-0x0000000088467fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088468000-0x0000000088667fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000088668000-0x0000000088e57fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000088e58000-0x000000008ae57fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ae58000-0x000000008aefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008aefe000-0x000000008aefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8aefd014  SMBIOS=0x886dd000  SMBIOS 3.0=0x886db000  ESRT=0x886d9dd8  PROP=0x6f813858
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 80UV/Lenovo ideapad 510S-14IKB, BIOS 2SCN23WW(V2.03) 03/24/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] e820: last_pfn = 0x8aeff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000886d9dd8 to 0x00000000886d9e60.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 2e000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x101f3f000, 0x101f3ffff] PGTABLE
[    0.000000] BRK [0x101f40000, 0x101f40fff] PGTABLE
[    0.000000] BRK [0x101f41000, 0x101f41fff] PGTABLE
[    0.000000] BRK [0x101f42000, 0x101f42fff] PGTABLE
[    0.000000] BRK [0x101f43000, 0x101f43fff] PGTABLE
[    0.000000] BRK [0x101f44000, 0x101f44fff] PGTABLE
[    0.000000] BRK [0x101f45000, 0x101f45fff] PGTABLE
[    0.000000] BRK [0x101f46000, 0x101f46fff] PGTABLE
[    0.000000] BRK [0x101f47000, 0x101f47fff] PGTABLE
[    0.000000] BRK [0x101f48000, 0x101f48fff] PGTABLE
[    0.000000] BRK [0x101f49000, 0x101f49fff] PGTABLE
[    0.000000] BRK [0x101f4a000, 0x101f4afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33037000-0x35812fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008AEFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000008AEC7188 00011C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000008AEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000008AECD000 01D8A3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000008AE35000 000040
[    0.000000] ACPI: UEFI 0x000000008AEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000008AEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000008AEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF9000 0004C8 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000008AEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF3000 003113 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000008AEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000008AEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000008AEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008AEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000008AEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000008AEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000008AEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AECC000 000AD2 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AECB000 0001BC (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000008AECA000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000008AEC9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC8000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC6000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC2000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC1000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008AEC0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000008AEBF000 000061 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBD000 00106A (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBC000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBA000 001B0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000008AEB9000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000008AEB8000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000008AEB7000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26efd5000-0x26effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000006f816fff]
[    0.000000]   node   0: [mem 0x000000006f819000-0x0000000071151fff]
[    0.000000]   node   0: [mem 0x0000000072252000-0x0000000088467fff]
[    0.000000]   node   0: [mem 0x000000008aefe000-0x000000008aefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Reserved but unavailable: 36115 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2056941
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 96 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8590 pages used for memmap
[    0.000000]   DMA32 zone: 549735 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f817000-0x6f817fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f818000-0x6f818fff]
[    0.000000] PM: Registered nosave memory: [mem 0x71152000-0x72251fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88468000-0x88667fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88668000-0x88e57fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88e58000-0x8ae57fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ae58000-0x8aefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8aeff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2024703
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-54-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7755244K/8227764K available (12300K kernel code, 2473K rwdata, 4272K rodata, 2408K init, 2416K bss, 472520K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39216 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.004000] DMAR: RMRR base: 0x00000088d54000 end: 0x00000088d73fff
[    0.004000] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.004000] x2apic enabled
[    0.004000] Switched APIC routing to cluster x2apic.
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: Detected 2700.000 MHz processor
[    0.028000] tsc: Detected 2712.000 MHz TSC
[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Security Framework initialized
[    0.028000] Yama: becoming mindful.
[    0.028000] AppArmor: AppArmor initialized
[    0.028000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028000] mce: CPU supports 8 MCE banks
[    0.028000] CPU0: Thermal monitoring enabled (TM1)
[    0.028000] process: using mwait in idle threads
[    0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028000] Spectre V2 : Mitigation: Full generic retpoline
[    0.028000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.028000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028000] MDS: Mitigation: Clear CPU buffers
[    0.037690] Freeing SMP alternatives memory: 36K
[    0.043973] TSC deadline timer enabled
[    0.043978] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.044000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.044000] ... version:                4
[    0.044000] ... bit width:              48
[    0.044000] ... generic registers:      4
[    0.044000] ... value mask:             0000ffffffffffff
[    0.044000] ... max period:             00007fffffffffff
[    0.044000] ... fixed-purpose events:   3
[    0.044000] ... event mask:             000000070000000f
[    0.044000] Hierarchical SRCU implementation.
[    0.044000] smp: Bringing up secondary CPUs ...
[    0.044000] x86: Booting SMP configuration:
[    0.044000] .... node  #0, CPUs:      #1
[    0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.044000]  #2
[    0.044000] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.044000]  #3
[    0.044000] smp: Brought up 1 node, 4 CPUs
[    0.044000] smpboot: Max logical packages: 1
[    0.044000] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.044202] devtmpfs: initialized
[    0.044202] x86/mm: Memory block size: 128MB
[    0.044529] evm: security.selinux
[    0.044530] evm: security.SMACK64
[    0.044531] evm: security.SMACK64EXEC
[    0.044531] evm: security.SMACK64TRANSMUTE
[    0.044531] evm: security.SMACK64MMAP
[    0.044532] evm: security.apparmor
[    0.044532] evm: security.ima
[    0.044533] evm: security.capability
[    0.044542] PM: Registering ACPI NVS region [mem 0x6f817000-0x6f817fff] (4096 bytes)
[    0.044542] PM: Registering ACPI NVS region [mem 0x71152000-0x72251fff] (17825792 bytes)
[    0.044542] PM: Registering ACPI NVS region [mem 0x88e58000-0x8ae57fff] (33554432 bytes)
[    0.044542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044542] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.044542] pinctrl core: initialized pinctrl subsystem
[    0.044542] RTC time:  7:12:27, date: 07/19/19
[    0.044542] NET: Registered protocol family 16
[    0.044542] audit: initializing netlink subsys (disabled)
[    0.044542] audit: type=2000 audit(1563520347.044:1): state=initialized audit_enabled=0 res=1
[    0.044542] cpuidle: using governor ladder
[    0.044542] cpuidle: using governor menu
[    0.044542] Simple Boot Flag at 0x44 set to 0x1
[    0.044542] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.044542] ACPI: bus type PCI registered
[    0.044542] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044542] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.044542] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.044542] PCI: Using configuration type 1 for base access
[    0.044886] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.044886] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044886] ACPI: Added _OSI(Module Device)
[    0.044886] ACPI: Added _OSI(Processor Device)
[    0.044886] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044886] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044886] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044886] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044886] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.048325] ACPI: Executed 31 blocks of module-level executable AML code
[    0.058069] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.061286] ACPI: Dynamic OEM Table Load:
[    0.061297] ACPI: SSDT 0xFFFF88FB64F1C000 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.061513] ACPI: Executed 1 blocks of module-level executable AML code
[    0.061578] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.063462] ACPI: Dynamic OEM Table Load:
[    0.063468] ACPI: SSDT 0xFFFF88FB64A06C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.063670] ACPI: Executed 1 blocks of module-level executable AML code
[    0.064122] ACPI: Dynamic OEM Table Load:
[    0.064129] ACPI: SSDT 0xFFFF88FB64F1A000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.064600] ACPI: Executed 1 blocks of module-level executable AML code
[    0.064787] ACPI: Dynamic OEM Table Load:
[    0.064793] ACPI: SSDT 0xFFFF88FB648DF400 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.064989] ACPI: Executed 1 blocks of module-level executable AML code
[    0.067211] ACPI: EC: EC started
[    0.067212] ACPI: EC: interrupt blocked
[    0.067634] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.067636] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.067637] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.067637] ACPI: Interpreter enabled
[    0.067684] ACPI: (supports S0 S3 S4 S5)
[    0.067685] ACPI: Using IOAPIC for interrupt routing
[    0.067717] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.069207] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.082951] ACPI: Power Resource [PC01] (on)
[    0.099625] ACPI: Power Resource [FN00] (off)
[    0.099717] ACPI: Power Resource [FN01] (off)
[    0.099805] ACPI: Power Resource [FN02] (off)
[    0.099892] ACPI: Power Resource [FN03] (off)
[    0.099980] ACPI: Power Resource [FN04] (off)
[    0.101284] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.101289] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.101327] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.103285] PCI host bridge to bus 0000:00
[    0.103287] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.103288] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.103289] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.103290] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.103291] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.103293] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.103300] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.104203] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.104212] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.104217] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.104220] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.104232] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.105013] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.105035] pci 0000:00:14.0: reg 0x10: [mem 0xc1400000-0xc140ffff 64bit]
[    0.105101] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.105893] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.105914] pci 0000:00:14.2: reg 0x10: [mem 0xc142a000-0xc142afff 64bit]
[    0.106686] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.106713] pci 0000:00:16.0: reg 0x10: [mem 0xc142b000-0xc142bfff 64bit]
[    0.106787] pci 0000:00:16.0: PME# supported from D3hot
[    0.107533] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.107551] pci 0000:00:17.0: reg 0x10: [mem 0xc1428000-0xc1429fff]
[    0.107559] pci 0000:00:17.0: reg 0x14: [mem 0xc142e000-0xc142e0ff]
[    0.107566] pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
[    0.107574] pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
[    0.107581] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.107588] pci 0000:00:17.0: reg 0x24: [mem 0xc142c000-0xc142c7ff]
[    0.107629] pci 0000:00:17.0: PME# supported from D3hot
[    0.108369] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.108439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.109214] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.109283] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.110044] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.110112] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.110879] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.110945] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.111734] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.112568] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.112584] pci 0000:00:1f.2: reg 0x10: [mem 0xc1424000-0xc1427fff]
[    0.113362] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.113391] pci 0000:00:1f.3: reg 0x10: [mem 0xc1420000-0xc1423fff 64bit]
[    0.113423] pci 0000:00:1f.3: reg 0x20: [mem 0xc1410000-0xc141ffff 64bit]
[    0.113473] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.114238] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.114298] pci 0000:00:1f.4: reg 0x10: [mem 0xc142d000-0xc142d0ff 64bit]
[    0.114367] pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
[    0.115211] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.115233] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.115243] pci 0000:01:00.0: reg 0x18: [mem 0xc1300000-0xc133ffff 64bit]
[    0.115249] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[    0.115259] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.115266] pci 0000:01:00.0: enabling Extended Tags
[    0.115316] pci 0000:01:00.0: supports D1 D2
[    0.115317] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.115379] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.115381] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.115384] pci 0000:00:1c.0:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.115387] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.115452] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.115486] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.115517] pci 0000:02:00.0: reg 0x18: [mem 0xc1204000-0xc1204fff 64bit]
[    0.115538] pci 0000:02:00.0: reg 0x20: [mem 0xc1200000-0xc1203fff 64bit]
[    0.115647] pci 0000:02:00.0: supports D1 D2
[    0.115648] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.124080] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.124083] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.124085] pci 0000:00:1c.4:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.124262] pci 0000:03:00.0: [8086:3166] type 00 class 0x028000
[    0.124323] pci 0000:03:00.0: reg 0x10: [mem 0xc1100000-0xc1101fff 64bit]
[    0.124538] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.136165] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.136169] pci 0000:00:1c.5:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.136243] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[    0.136281] pci 0000:04:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff]
[    0.136430] pci 0000:04:00.0: supports D1 D2
[    0.136431] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.148053] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.148058] pci 0000:00:1d.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.157084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.157224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157360] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157428] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157498] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.157891] platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff]
[    0.157896] acpi MSFT0101:00: platform device creation failed: -16
[    0.158400] ACPI: EC: interrupt unblocked
[    0.158414] ACPI: EC: event unblocked
[    0.158426] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.158427] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.158621] SCSI subsystem initialized
[    0.158650] libata version 3.00 loaded.
[    0.158650] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.158650] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.158650] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.158650] vgaarb: loaded
[    0.158650] ACPI: bus type USB registered
[    0.158650] usbcore: registered new interface driver usbfs
[    0.158650] usbcore: registered new interface driver hub
[    0.158650] usbcore: registered new device driver usb
[    0.158650] EDAC MC: Ver: 3.0.0
[    0.158650] Registered efivars operations
[    0.200020] PCI: Using ACPI for IRQ routing
[    0.227912] PCI: pci_cache_line_size set to 64 bytes
[    0.228138] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.228139] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.228140] e820: reserve RAM buffer [mem 0x6f817000-0x6fffffff]
[    0.228141] e820: reserve RAM buffer [mem 0x71152000-0x73ffffff]
[    0.228141] e820: reserve RAM buffer [mem 0x88468000-0x8bffffff]
[    0.228142] e820: reserve RAM buffer [mem 0x8aeff000-0x8bffffff]
[    0.228143] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.228213] NetLabel: Initializing
[    0.228213] NetLabel:  domain hash size = 128
[    0.228213] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.228223] NetLabel:  unlabeled traffic allowed by default
[    0.228421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.228426] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.232001] clocksource: Switched to clocksource hpet
[    0.239560] VFS: Disk quotas dquot_6.6.0
[    0.239571] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.239638] AppArmor: AppArmor Filesystem Enabled
[    0.239657] pnp: PnP ACPI init
[    0.239831] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.239832] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.239833] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.239835] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.239836] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.239837] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.239838] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.239842] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240136] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.240140] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240262] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.240263] system 00:02: [io  0xfd40-0xfd43] has been reserved
[    0.240264] system 00:02: [io  0xffff] has been reserved
[    0.240265] system 00:02: [io  0xffff] has been reserved
[    0.240266] system 00:02: [io  0xffff] has been reserved
[    0.240267] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.240269] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.240271] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240356] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.240387] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.240390] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.240421] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.248103] pnp 00:06: Plug and Play ACPI device, IDs SYN2b7e SYN2b00 SYN0002 PNP0f13 (active)
[    0.249571] system 00:07: [mem 0xfe035000-0xfe035fff] has been reserved
[    0.249572] system 00:07: [mem 0xfe034008-0xfe034fff] has been reserved
[    0.249574] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.249575] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.249577] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.249580] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250127] system 00:08: [mem 0xfe034000-0xfe034007] has been reserved
[    0.250130] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250350] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.250352] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.250353] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.250355] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.250356] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.250358] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.250359] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.250361] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.250362] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.250364] system 00:09: [mem 0xff001000-0xff0010ff] has been reserved
[    0.250365] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.250367] system 00:09: [mem 0x90000000-0x9001ffff] has been reserved
[    0.250370] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251016] pnp: PnP ACPI: found 10 devices
[    0.258392] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.258408] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.258432] pci 0000:01:00.0: BAR 6: assigned [mem 0xc1340000-0xc135ffff pref]
[    0.258434] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.258436] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.258439] pci 0000:00:1c.0:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.258441] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.258445] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.258447] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.258450] pci 0000:00:1c.4:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.258456] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.258459] pci 0000:00:1c.5:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.258464] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.258467] pci 0000:00:1d.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.258473] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.258474] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.258475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.258476] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.258477] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.258478] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.258479] pci_bus 0000:01: resource 1 [mem 0xc1300000-0xc13fffff]
[    0.258480] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.258481] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.258482] pci_bus 0000:02: resource 1 [mem 0xc1200000-0xc12fffff]
[    0.258484] pci_bus 0000:03: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.258485] pci_bus 0000:04: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.258621] NET: Registered protocol family 2
[    0.258768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.258861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.259005] TCP: Hash tables configured (established 65536 bind 65536)
[    0.259030] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.259052] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.259093] NET: Registered protocol family 1
[    0.259103] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.260690] PCI: CLS 64 bytes, default 64
[    0.260718] Unpacking initramfs...
[    0.702298] Freeing initrd memory: 40816K
[    0.702333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.702336] software IO TLB [mem 0x7b8e6000-0x7f8e6000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.702494] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.702608] Scanning for low memory corruption every 60 seconds
[    0.703133] Initialise system trusted keyrings
[    0.703141] Key type blacklist registered
[    0.703197] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.703967] zbud: loaded
[    0.704397] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.704537] fuse init (API version 7.26)
[    0.707714] Key type asymmetric registered
[    0.707715] Asymmetric key parser 'x509' registered
[    0.707740] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.707799] io scheduler noop registered
[    0.707800] io scheduler deadline registered
[    0.707818] io scheduler cfq registered (default)
[    0.708525] efifb: probing for efifb
[    0.708534] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[    0.708535] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.708536] efifb: scrolling: redraw
[    0.708537] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.708627] Console: switching to colour frame buffer device 240x67
[    0.708646] fb0: EFI VGA frame buffer device
[    0.708652] intel_idle: MWAIT substates: 0x11142120
[    0.708653] intel_idle: v0.4.1 model 0x8E
[    0.708834] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.708925] ACPI: AC Adapter [ACAD] (off-line)
[    0.708970] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
[    0.708977] ACPI: Lid Switch [LID0]
[    0.709006] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.709054] ACPI: Power Button [PWRB]
[    0.709076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.709128] ACPI: Power Button [PWRF]
[    0.768793] [Firmware Bug]: No valid trip found
[    0.768825] [Firmware Bug]: No valid trip found
[    0.769006] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.832118] ACPI: Battery Slot [BAT1] (battery present)
[    0.832390] Linux agpgart interface v0.103
[    0.862557] loop: module loaded
[    0.862689] libphy: Fixed MDIO Bus: probed
[    0.862690] tun: Universal TUN/TAP device driver, 1.6
[    0.862741] PPP generic driver version 2.4.2
[    0.862797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.862802] ehci-pci: EHCI PCI platform driver
[    0.862811] ehci-platform: EHCI generic platform driver
[    0.862819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.862820] ohci-pci: OHCI PCI platform driver
[    0.862826] ohci-platform: OHCI generic platform driver
[    0.862831] uhci_hcd: USB Universal Host Controller Interface driver
[    0.863003] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.863008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.864142] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[    0.864147] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.864283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864286] usb usb1: Product: xHCI Host Controller
[    0.864287] usb usb1: Manufacturer: Linux 4.15.0-54-generic xhci-hcd
[    0.864288] usb usb1: SerialNumber: 0000:00:14.0
[    0.864428] hub 1-0:1.0: USB hub found
[    0.864443] hub 1-0:1.0: 12 ports detected
[    0.865008] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.865011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.865014] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.865040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.865041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.865042] usb usb2: Product: xHCI Host Controller
[    0.865044] usb usb2: Manufacturer: Linux 4.15.0-54-generic xhci-hcd
[    0.865045] usb usb2: SerialNumber: 0000:00:14.0
[    0.865179] hub 2-0:1.0: USB hub found
[    0.865189] hub 2-0:1.0: 6 ports detected
[    0.865385] usb: port power management may be unreliable
[    0.865681] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.872909] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.872912] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.873117] mousedev: PS/2 mouse device common for all mice
[    0.873479] rtc_cmos 00:03: RTC can wake from S4
[    0.873909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.873990] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.873995] i2c /dev entries driver
[    0.874048] device-mapper: uevent: version 1.0.3
[    0.874138] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.874141] intel_pstate: Intel P-state driver initializing
[    0.874600] intel_pstate: HWP enabled
[    0.874751] ledtrig-cpu: registered to indicate activity on CPUs
[    0.874753] EFI Variables Facility v0.08 2004-May-17
[    0.898490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.917604] intel_pmc_core:  initialized
[    0.917777] NET: Registered protocol family 10
[    0.921771] Segment Routing with IPv6
[    0.921788] NET: Registered protocol family 17
[    0.921844] Key type dns_resolver registered
[    0.922315] RAS: Correctable Errors collector initialized.
[    0.922340] microcode: sig=0x806e9, pf=0x80, revision=0xb4
[    0.922511] microcode: Microcode Update Driver: v2.2.
[    0.922518] sched_clock: Marking stable (922508987, 0)->(901388428, 21120559)
[    0.922818] registered taskstats version 1
[    0.922823] Loading compiled-in X.509 certificates
[    0.924646] Loaded X.509 cert 'Build time autogenerated kernel key: 1cc14bc8298a06d551159822c55fa35abd77a621'
[    0.925097] Couldn't get size: 0x800000000000000e
[    0.925100] MODSIGN: Couldn't get UEFI db list
[    0.925324] Couldn't get size: 0x800000000000000e
[    0.925325] MODSIGN: Couldn't get UEFI MokListRT
[    0.926683] zswap: loaded using pool lzo/zbud
[    0.929617] Key type big_key registered
[    0.929620] Key type trusted registered
[    0.930869] Key type encrypted registered
[    0.930873] AppArmor: AppArmor sha1 policy hashing enabled
[    0.937655] ima: Allocated hash algorithm: sha1
[    1.001301] evm: HMAC attrs: 0x1
[    1.002265]   Magic number: 11:342:218
[    1.002316] acpi device:69: hash matches
[    1.002320] acpi device:3c: hash matches
[    1.002464] rtc_cmos 00:03: setting system clock to 2019-07-19 07:12:28 UTC (1563520348)
[    1.002524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.002524] EDD information not available.
[    1.200057] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.351369] usb 1-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.351370] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.351371] usb 1-2: Product: USB Receiver
[    1.351372] usb 1-2: Manufacturer: Logitech
[    1.449724] Freeing unused kernel image memory: 2408K
[    1.456173] Write protecting the kernel read-only data: 20480k
[    1.457339] Freeing unused kernel image memory: 2008K
[    1.457605] Freeing unused kernel image memory: 1872K
[    1.462936] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.462937] x86/mm: Checking user space page tables
[    1.468071] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.480062] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.566447] ahci 0000:00:17.0: version 3.0
[    1.566712] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[    1.566715] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    1.567439] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.567445] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.568172] scsi host0: ahci
[    1.568298] scsi host1: ahci
[    1.568342] ata1: SATA max UDMA/133 abar m2048@0xc142c000 port 0xc142c100 irq 124
[    1.568343] ata2: DUMMY
[    1.577254] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0x        (ptrval), fc:45:96:48:4b:54, XID 14100800 IRQ 125
[    1.577256] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.586440] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.641109] usb 1-5: New USB device found, idVendor=5986, idProduct=0711
[    1.641111] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.641112] usb 1-5: Product: EasyCamera
[    1.641113] usb 1-5: Manufacturer: SunplusIT Inc
[    1.724387] clocksource: Switched to clocksource tsc
[    1.768161] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    1.884730] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.887854] ata1.00: ATA-9: LITEON CV3-DE256, TD86201, max UDMA/133
[    1.887856] ata1.00: 500118192 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.888470] ata1.00: configured for UDMA/133
[    1.888614] scsi 0:0:0:0: Direct-Access     ATA      LITEON CV3-DE256 201  PQ: 0 ANSI: 5
[    1.888903] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.888973] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.888985] sd 0:0:0:0: [sda] Write Protect is off
[    1.888987] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.889008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.891096]  sda: sda1 sda2
[    1.891303] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.916750] random: fast init done
[    1.917381] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[    1.917382] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.917552] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.917560] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.917574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.921588] hidraw: raw HID events driver (C) Jiri Kosina
[    1.929370] usbcore: registered new interface driver usbhid
[    1.929371] usbhid: USB HID core driver
[    1.930900] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    2.000324] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[    2.035469] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[    2.035473] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b7e SYN2b00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.059784] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input6
[    2.059852] logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:14.0-2:1
[    2.065843] input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input7
[    2.065936] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-2:3
[    2.099632] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2334, fw id: 1508589
[    2.140037] raid6: sse2x1   gen() 10932 MB/s
[    2.140912] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.188032] raid6: sse2x1   xor()  7979 MB/s
[    2.236038] raid6: sse2x2   gen() 13624 MB/s
[    2.284030] raid6: sse2x2   xor()  9164 MB/s
[    2.332031] raid6: sse2x4   gen() 15731 MB/s
[    2.380036] raid6: sse2x4   xor()  9758 MB/s
[    2.428036] raid6: avx2x1   gen() 21768 MB/s
[    2.476035] raid6: avx2x1   xor() 15157 MB/s
[    2.524035] raid6: avx2x2   gen() 26663 MB/s
[    2.572031] raid6: avx2x2   xor() 16585 MB/s
[    2.620030] raid6: avx2x4   gen() 30047 MB/s
[    2.668035] raid6: avx2x4   xor() 18593 MB/s
[    2.668037] raid6: using algorithm avx2x4 gen() 30047 MB/s
[    2.668037] raid6: .... xor() 18593 MB/s, rmw enabled
[    2.668038] raid6: using avx2x2 recovery algorithm
[    2.670277] xor: automatically using best checksumming function   avx
[    2.682474] Btrfs loaded, crc32c=crc32c-intel
[   33.790587] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   33.924936] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.992498] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   34.012100] systemd[1]: Detected architecture x86-64.
[   34.014264] systemd[1]: Set hostname to <philinux>.
[   34.118718] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   34.118866] systemd[1]: Created slice System Slice.
[   34.118916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   34.118950] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   34.118992] systemd[1]: Listening on LVM2 poll daemon socket.
[   34.119027] systemd[1]: Listening on fsck to fsckd communication Socket.
[   34.119081] systemd[1]: Listening on udev Control Socket.
[   34.138741] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   34.162455] lp: driver loaded but no devices found
[   34.164551] ppdev: user-space parallel port driver
[   34.200497] systemd-journald[326]: Received request to flush runtime journal from PID 1
[   34.366329] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   34.376299] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   34.472812] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[   34.483080] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[   34.483888] [drm] Memory usable by graphics device = 4096M
[   34.483891] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[   34.483892] fb: switching to inteldrmfb from EFI VGA
[   34.483926] Console: switching to colour dummy device 80x25
[   34.483997] [drm] Replacing VGA console driver
[   34.508736] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   34.508737] [drm] Driver supports precise vblank timestamp query.
[   34.515439] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   34.526349] random: crng init done
[   34.526350] random: 7 urandom warning(s) missed due to ratelimiting
[   34.526549] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[   34.528415] media: Linux media interface: v0.10
[   34.530421] Bluetooth: Core ver 2.22
[   34.530437] NET: Registered protocol family 31
[   34.530438] Bluetooth: HCI device and connection manager initialized
[   34.530441] Bluetooth: HCI socket layer initialized
[   34.530443] Bluetooth: L2CAP socket layer initialized
[   34.530447] Bluetooth: SCO socket layer initialized
[   34.536084] Linux video capture interface: v2.00
[   34.540126] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   34.543833] usbcore: registered new interface driver btusb
[   34.553641] uvcvideo: Found UVC 1.00 device EasyCamera (5986:0711)
[   34.560700] Bluetooth: hci0: read Intel version: 370810011003110e00
[   34.561123] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   34.561125] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[   34.561126] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   34.561128] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   34.561199] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9
[   34.561266] usbcore: registered new interface driver uvcvideo
[   34.561267] USB Video Class driver (1.1.1)
[   34.562975] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   34.571160] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   34.571372] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   34.571505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.587101] fbcon: inteldrmfb (fb0) is primary device
[   34.587173] Console: switching to colour frame buffer device 240x67
[   34.587206] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   34.605832] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   34.619672] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   34.646575] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   34.646605] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   34.646606] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   34.646607] RAPL PMU: hw unit of domain package 2^-14 Joules
[   34.646607] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   34.646608] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   34.646609] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   34.673163] Intel(R) Wireless WiFi driver for Linux
[   34.673164] Copyright(c) 2003- 2015 Intel Corporation
[   34.685611] AVX2 version of gcm_enc/dec engaged.
[   34.685612] AES CTR mode by8 optimization enabled
[   34.686064] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   34.686066] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   34.686067] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   34.686068] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   34.686069] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   34.686070] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   34.686071] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   34.695089] [drm] radeon kernel modesetting enabled.
[   34.695108] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   34.695298] ATPX version 1, functions 0x00000033
[   34.703841] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[   34.705698] ATPX Hybrid Graphics
[   34.705781] radeon 0000:01:00.0: enabling device (0400 -> 0403)
[   34.706291] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x3989 0x83).
[   34.706314] vga_switcheroo: enabled
[   34.755482] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[   34.756850] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   34.756904] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   34.756954] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   34.757002] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   34.757049] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   34.757098] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   34.757146] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   34.758741] ATOM BIOS: Lenovo
[   34.758799] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   34.758801] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[   34.758811] [drm] Detected VRAM RAM=2048M, BAR=256M
[   34.758812] [drm] RAM width 64bits DDR
[   34.768038] [TTM] Zone  kernel: Available graphics memory: 4003544 kiB
[   34.768039] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   34.768040] [TTM] Initializing pool allocator
[   34.768043] [TTM] Initializing DMA pool allocator
[   34.768061] [drm] radeon: 2048M of VRAM memory ready
[   34.768062] [drm] radeon: 2048M of GTT memory ready.
[   34.768071] [drm] Loading hainan Microcode
[   34.777102] iwlwifi 0000:03:00.0: base HW address: 98:54:1b:88:40:d7
[   34.777634] kvm: disabled by bios
[   34.795864] [drm] Internal thermal controller without fan control
[   34.795978] intel_rapl: Found RAPL domain package
[   34.795980] intel_rapl: Found RAPL domain core
[   34.795981] intel_rapl: Found RAPL domain uncore
[   34.795982] intel_rapl: Found RAPL domain dram
[   34.796197] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   34.811552] [drm] radeon: dpm initialized
[   34.811559] [drm] GART: num cpu pages 524288, num gpu pages 524288
[   34.815626] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   34.815630] [drm] PCIE gen 3 link speeds already enabled
[   34.824570] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   34.827605] radeon 0000:01:00.0: WB enabled
[   34.827608] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7e3f6f6
[   34.827611] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000f85a228d
[   34.827613] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000637cadf1
[   34.827615] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000009e39cd38
[   34.827617] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000458df446
[   34.827619] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   34.827619] [drm] Driver supports precise vblank timestamp query.
[   34.827621] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   34.827664] radeon 0000:01:00.0: radeon: using MSI.
[   34.827681] [drm] radeon: irq initialized.
[   34.852028] Bluetooth: hci0: Intel firmware patch completed and activated
[   34.879325] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   34.879568] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   34.879587] thermal thermal_zone2: failed to read out thermal zone (-61)
[   34.956636] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   35.036178] [drm] ring test on 0 succeeded in 1 usecs
[   35.036183] [drm] ring test on 1 succeeded in 1 usecs
[   35.036188] [drm] ring test on 2 succeeded in 1 usecs
[   35.036196] [drm] ring test on 3 succeeded in 4 usecs
[   35.036203] [drm] ring test on 4 succeeded in 3 usecs
[   35.036415] [drm] ib test on ring 0 succeeded in 0 usecs
[   35.036471] [drm] ib test on ring 1 succeeded in 0 usecs
[   35.036526] [drm] ib test on ring 2 succeeded in 0 usecs
[   35.036550] [drm] ib test on ring 3 succeeded in 0 usecs
[   35.036564] [drm] ib test on ring 4 succeeded in 0 usecs
[   35.037078] [drm] Radeon Display Connectors
[   35.064156] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[   35.131604] [drm] amdgpu kernel modesetting enabled.
[   35.131620] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   35.131725] ATPX version 1, functions 0x00000033
[   35.131830] ATPX Hybrid Graphics
[   35.275305] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1.  Priority:-2 extents:1 across:999420k SSFS
[   35.804398] [drm] RC6 on
[   36.460494] audit: type=1400 audit(1563520383.953:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=848 comm="apparmor_parser"
[   36.460539] audit: type=1400 audit(1563520383.953:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=847 comm="apparmor_parser"
[   36.460541] audit: type=1400 audit(1563520383.953:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=847 comm="apparmor_parser"
[   36.460543] audit: type=1400 audit(1563520383.953:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=847 comm="apparmor_parser"
[   36.461590] audit: type=1400 audit(1563520383.953:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=849 comm="apparmor_parser"
[   36.461775] audit: type=1400 audit(1563520383.953:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=844 comm="apparmor_parser"
[   36.461778] audit: type=1400 audit(1563520383.953:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
[   36.461780] audit: type=1400 audit(1563520383.953:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=844 comm="apparmor_parser"
[   36.461783] audit: type=1400 audit(1563520383.953:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
[   36.462644] audit: type=1400 audit(1563520383.953:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=851 comm="apparmor_parser"
[   36.633154] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.633167] Bluetooth: BNEP filters: protocol multicast
[   36.633170] Bluetooth: BNEP socket layer initialized
[   36.934111] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   36.982577] r8169 0000:02:00.0 enp2s0: link down
[   36.982669] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   36.986332] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.109994] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   37.213301] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   40.781101] wlp3s0: authenticate with 18:83:bf:69:b0:cd
[   40.787343] wlp3s0: send auth to 18:83:bf:69:b0:cd (try 1/3)
[   40.791710] wlp3s0: authenticated
[   40.796070] wlp3s0: associate with 18:83:bf:69:b0:cd (try 1/3)
[   40.816938] wlp3s0: RX AssocResp from 18:83:bf:69:b0:cd (capab=0x1411 status=0 aid=4)
[   40.819009] wlp3s0: associated
[   40.904467] wlp3s0: Limiting TX power to 22 (22 - 0) dBm as advertised by 18:83:bf:69:b0:cd
[   40.967320] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   91.003994] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[   91.004001] [drm] PCIE gen 3 link speeds already enabled
[   91.031918] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   91.032090] radeon 0000:01:00.0: WB enabled
[   91.032095] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7e3f6f6
[   91.032098] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000f85a228d
[   91.032101] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000637cadf1
[   91.032103] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000009e39cd38
[   91.032106] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000458df446
[   91.225804] [drm] ring test on 0 succeeded in 1 usecs
[   91.225809] [drm] ring test on 1 succeeded in 1 usecs
[   91.225813] [drm] ring test on 2 succeeded in 1 usecs
[   91.225821] [drm] ring test on 3 succeeded in 4 usecs
[   91.225826] [drm] ring test on 4 succeeded in 3 usecs
[   91.225915] [drm] ib test on ring 0 succeeded in 0 usecs
[   91.226006] [drm] ib test on ring 1 succeeded in 0 usecs
[   91.226093] [drm] ib test on ring 2 succeeded in 0 usecs
[   91.226106] [drm] ib test on ring 3 succeeded in 0 usecs
[   91.226118] [drm] ib test on ring 4 succeeded in 0 usecs
[   92.262395] Bluetooth: RFCOMM TTY layer initialized
[   92.262401] Bluetooth: RFCOMM socket layer initialized
[   92.262406] Bluetooth: RFCOMM ver 1.11
[   93.608786] rfkill: input handler disabled
[  114.848311] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[  114.869268] usb 2-3: New USB device found, idVendor=1058, idProduct=25ee
[  114.869277] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  114.869282] usb 2-3: Product: My Book 25EE
[  114.869288] usb 2-3: Manufacturer: Western Digital
[  114.869292] usb 2-3: SerialNumber: 5743433445344E444B564E32
[  114.887338] usb-storage 2-3:1.0: USB Mass Storage device detected
[  114.887695] scsi host2: usb-storage 2-3:1.0
[  114.887887] usbcore: registered new interface driver usb-storage
[  114.889967] usbcore: registered new interface driver uas
[  115.900908] scsi 2:0:0:0: Direct-Access     WD       My Book 25EE     4007 PQ: 0 ANSI: 6
[  115.901337] scsi 2:0:0:1: Enclosure         WD       SES Device       4007 PQ: 0 ANSI: 6
[  115.903160] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  115.903769] scsi 2:0:0:1: Attached scsi generic sg2 type 13
[  115.904259] sd 2:0:0:0: [sdb] Spinning up disk...
[  115.917124] scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[  115.917129] scsi 2:0:0:1: Failed to get diagnostic page 0x1
[  115.917131] scsi 2:0:0:1: Failed to bind enclosure -19
[  115.917145] ses 2:0:0:1: Attached Enclosure device
[  116.924214] .
[  117.948229] .
[  118.972049] .
[  119.996215] .
[  121.020038] .
[  122.044239] .
[  123.068210] .
[  124.092028] .
[  125.116227] .
[  126.140204] .
[  126.140369] ready
[  146.953893] logitech-hidpp-device 0003:046D:401B.0004: HID++ 2.0 device connected.
[  206.370854] usb 2-3: Disable of device-initiated U1 failed.
[  206.374216] usb 2-3: Disable of device-initiated U2 failed.
[  207.132182] xhci_hcd 0000:00:14.0: Cannot set link state.
[  207.132195] usb usb2-port3: cannot disable (err = -32)
[  207.132212] xhci_hcd 0000:00:14.0: Cannot set link state.
[  207.132221] usb usb2-port3: cannot disable (err = -32)
[  207.132261] usb 2-3: USB disconnect, device number 2
[  207.147931] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  207.147933] sd 2:0:0:0: [sdb] Sense not available.
[  207.147935] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  207.147937] sd 2:0:0:0: [sdb] 0-byte physical blocks
[  207.147987] sd 2:0:0:0: [sdb] Write Protect is off
[  207.147988] sd 2:0:0:0: [sdb] Mode Sense: 01 00 00 00
[  207.148004] sd 2:0:0:0: [sdb] Asking for cache data failed
[  207.148008] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  207.148203] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  207.148205] sd 2:0:0:0: [sdb] Sense not available.
[  207.148265] sd 2:0:0:0: [sdb] Attached SCSI disk
[  333.537479] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
[  333.558462] usb 2-3: New USB device found, idVendor=1058, idProduct=25ee
[  333.558471] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  333.558476] usb 2-3: Product: My Book 25EE
[  333.558481] usb 2-3: Manufacturer: Western Digital
[  333.558486] usb 2-3: SerialNumber: 5743433445344E444B564E32
[  333.559575] usb-storage 2-3:1.0: USB Mass Storage device detected
[  333.559869] scsi host2: usb-storage 2-3:1.0
[  334.566864] scsi 2:0:0:0: Direct-Access     WD       My Book 25EE     4007 PQ: 0 ANSI: 6
[  334.567318] scsi 2:0:0:1: Enclosure         WD       SES Device       4007 PQ: 0 ANSI: 6
[  334.569198] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  334.569607] ses 2:0:0:1: Attached Enclosure device
[  334.569930] ses 2:0:0:1: Attached scsi generic sg2 type 13
[  334.570711] ses 2:0:0:1: Failed to get diagnostic page 0x1
[  334.570730] ses 2:0:0:1: Failed to bind enclosure -19
[  334.571251] sd 2:0:0:0: [sdb] Unit Not Ready
[  334.571263] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[  334.571279] sd 2:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81
[  343.288169] usb 2-3: USB disconnect, device number 3
[  343.308425] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  343.308431] sd 2:0:0:0: [sdb] Sense not available.
[  343.308441] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  343.308445] sd 2:0:0:0: [sdb] 0-byte physical blocks
[  343.308537] sd 2:0:0:0: [sdb] Write Protect is off
[  343.308543] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  343.308638] sd 2:0:0:0: [sdb] Asking for cache data failed
[  343.308649] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  343.309348] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  343.309354] sd 2:0:0:0: [sdb] Sense not available.
[  343.309485] sd 2:0:0:0: [sdb] Attached SCSI disk
[  343.642317] usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
[  343.665078] usb 2-3: New USB device found, idVendor=1058, idProduct=25ee
[  343.665089] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  343.665095] usb 2-3: Product: My Book 25EE
[  343.665101] usb 2-3: Manufacturer: Western Digital
[  343.665108] usb 2-3: SerialNumber: 5743433445344E444B564E32
[  343.666230] usb-storage 2-3:1.0: USB Mass Storage device detected
[  343.666530] scsi host2: usb-storage 2-3:1.0
[  344.685504] scsi 2:0:0:0: Direct-Access     WD       My Book 25EE     4007 PQ: 0 ANSI: 6
[  344.685919] scsi 2:0:0:1: Enclosure         WD       SES Device       4007 PQ: 0 ANSI: 6
[  344.687639] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  344.687980] ses 2:0:0:1: Attached Enclosure device
[  344.688370] ses 2:0:0:1: Attached scsi generic sg2 type 13
[  344.688415] sd 2:0:0:0: [sdb] Spinning up disk...
[  344.688658] ses 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[  344.688673] ses 2:0:0:1: Failed to get diagnostic page 0x1
[  344.688685] ses 2:0:0:1: Failed to bind enclosure -19
[  345.709446] .
[  346.734001] .
[  347.758705] .
[  348.783072] .
[  349.807763] .
[  350.832275] .
[  351.856745] .
[  352.881259] .
[  353.905755] .
[  354.930174] .
[  354.930359] ready
[  396.795020] xhci_hcd 0000:00:14.0: Cannot set link state.
[  396.795034] usb usb2-port3: cannot disable (err = -32)
[  396.795055] usb 2-3: USB disconnect, device number 4
[  396.815033] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  396.815035] sd 2:0:0:0: [sdb] Sense not available.
[  396.815038] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[  396.815039] sd 2:0:0:0: [sdb] 0-byte physical blocks
[  396.815085] sd 2:0:0:0: [sdb] Write Protect is off
[  396.815087] sd 2:0:0:0: [sdb] Mode Sense: 00 12 01 00
[  396.815136] sd 2:0:0:0: [sdb] Asking for cache data failed
[  396.815140] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  396.815456] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  396.815458] sd 2:0:0:0: [sdb] Sense not available.
[  396.815500] sd 2:0:0:0: [sdb] Attached SCSI disk
[  399.743936] wlp3s0: deauthenticating from 18:83:bf:69:b0:cd by local choice (Reason: 3=DEAUTH_LEAVING)
[  429.754704] PM: suspend entry (deep)
[  429.754705] PM: Syncing filesystems ... done.
[  429.759391] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  429.761281] OOM killer disabled.
[  429.761281] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  429.762484] Suspending console(s) (use no_console_suspend to debug)
[  429.788513] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  429.789113] sd 0:0:0:0: [sda] Stopping disk
[  430.457520] ACPI: EC: interrupt blocked
[  430.565271] ACPI: Preparing to enter system sleep state S3
[  430.566322] ACPI: EC: event blocked
[  430.566323] ACPI: EC: EC stopped
[  430.566324] PM: Saving platform NVS memory
[  430.567078] Disabling non-boot CPUs ...
[  430.581133] IRQ 127: no longer affine to CPU1
[  430.581140] IRQ 129: no longer affine to CPU1
[  430.582157] smpboot: CPU 1 is now offline
[  430.605438] IRQ 124: no longer affine to CPU2
[  430.606461] smpboot: CPU 2 is now offline
[  430.632998] IRQ 122: no longer affine to CPU3
[  430.633008] IRQ 125: no longer affine to CPU3
[  430.634025] smpboot: CPU 3 is now offline
[  430.637275] ACPI: Low-level resume complete
[  430.637386] ACPI: EC: EC started
[  430.637386] PM: Restoring platform NVS memory
[  430.639736] Enabling non-boot CPUs ...
[  430.639778] x86: Booting SMP configuration:
[  430.639779] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  430.641292]  cache: parent cpu1 should not be sleeping
[  430.641367] microcode: sig=0x806e9, pf=0x80, revision=0x3c
[  430.642650] microcode: updated to revision 0xb4, date = 2019-04-01
[  430.642719] CPU1 is up
[  430.642747] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  430.643129]  cache: parent cpu2 should not be sleeping
[  430.643204] microcode: sig=0x806e9, pf=0x80, revision=0xb4
[  430.643482] CPU2 is up
[  430.643503] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  430.643860]  cache: parent cpu3 should not be sleeping
[  430.644005] CPU3 is up
[  430.647158] ACPI: Waking up from system sleep state S3
[  430.652992] ACPI: EC: interrupt unblocked
[  431.153222] ACPI: EC: event unblocked
[  431.158808] sd 0:0:0:0: [sda] Starting disk
[  431.199226] r8169 0000:02:00.0 enp2s0: link down
[  431.400805] usb 1-2: reset full-speed USB device number 2 using xhci_hcd
[  431.472509] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  431.475783] ata1.00: configured for UDMA/133
[  431.586562] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[  431.623344] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[  431.676990] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[  431.952936] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[  432.107529] OOM killer enabled.
[  432.107530] Restarting tasks ... done.
[  432.113672] thermal thermal_zone2: failed to read out thermal zone (-61)
[  432.115065] [drm] RC6 on
[  432.135448] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[  432.135452] [drm] PCIE gen 3 link speeds already enabled
[  432.141123] Bluetooth: hci0: read Intel version: 370810011003110e00
[  432.141128] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[  432.148672] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[  432.148810] radeon 0000:01:00.0: WB enabled
[  432.148813] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000a7e3f6f6
[  432.148815] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000f85a228d
[  432.148817] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000637cadf1
[  432.148820] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x000000009e39cd38
[  432.148821] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x00000000458df446
[  432.172716] PM: suspend exit
[  432.343572] [drm] ring test on 0 succeeded in 1 usecs
[  432.343576] [drm] ring test on 1 succeeded in 1 usecs
[  432.343581] [drm] ring test on 2 succeeded in 1 usecs
[  432.343589] [drm] ring test on 3 succeeded in 4 usecs
[  432.343596] [drm] ring test on 4 succeeded in 4 usecs
[  432.343625] [drm] ib test on ring 0 succeeded in 0 usecs
[  432.343647] [drm] ib test on ring 1 succeeded in 0 usecs
[  432.343724] [drm] ib test on ring 2 succeeded in 0 usecs
[  432.343739] [drm] ib test on ring 3 succeeded in 0 usecs
[  432.343753] [drm] ib test on ring 4 succeeded in 0 usecs
[  432.362301] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  432.408143] Bluetooth: hci0: Intel firmware patch completed and activated
[  432.411209] r8169 0000:02:00.0 enp2s0: link down
[  432.411303] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  432.412078] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  432.512708] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  432.568193] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  436.090174] wlp3s0: authenticate with 18:83:bf:69:b0:cd
[  436.094569] wlp3s0: send auth to 18:83:bf:69:b0:cd (try 1/3)
[  436.217410] wlp3s0: send auth to 18:83:bf:69:b0:cd (try 2/3)
[  436.219433] wlp3s0: authenticated
[  436.221277] wlp3s0: associate with 18:83:bf:69:b0:cd (try 1/3)
[  436.225294] wlp3s0: RX AssocResp from 18:83:bf:69:b0:cd (capab=0x1411 status=0 aid=4)
[  436.243343] wlp3s0: associated
[  436.243420] wlp3s0: Limiting TX power to 22 (22 - 0) dBm as advertised by 18:83:bf:69:b0:cd
[  436.496264] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  624.477773] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  624.477782] Bluetooth: HIDP socket layer initialized
[  736.554730] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[  736.705425] usb 1-4: New USB device found, idVendor=1058, idProduct=25ee
[  736.705431] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  736.705435] usb 1-4: Product: My Book 25EE
[  736.705439] usb 1-4: Manufacturer: Western Digital
[  736.705443] usb 1-4: SerialNumber: 5743433445344E444B564E32
[  736.706406] usb-storage 1-4:1.0: USB Mass Storage device detected
[  736.706835] scsi host2: usb-storage 1-4:1.0
[  737.715786] scsi 2:0:0:0: Direct-Access     WD       My Book 25EE     4007 PQ: 0 ANSI: 6
[  737.716516] scsi 2:0:0:1: Enclosure         WD       SES Device       4007 PQ: 0 ANSI: 6
[  737.719359] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  737.719689] ses 2:0:0:1: Attached Enclosure device
[  737.719937] ses 2:0:0:1: Attached scsi generic sg2 type 13
[  737.720549] ses 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[  737.720564] ses 2:0:0:1: Failed to get diagnostic page 0x1
[  737.720575] ses 2:0:0:1: Failed to bind enclosure -19
[  737.720990] sd 2:0:0:0: [sdb] Spinning up disk...
[  738.739096] .
[  739.763362] .
[  740.787540] .
[  741.815588] .
[  742.835783] .
[  743.860050] .
[  744.884106] .
[  745.908427] .
[  746.932436] .
[  747.956740] .
[  747.957037] ready
[  927.988508] sd 2:0:0:0: timing out command, waited 180s
[ 1108.012868] sd 2:0:0:0: timing out command, waited 180s
[ 1288.032133] sd 2:0:0:0: timing out command, waited 180s
[ 1288.032172] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1288.032178] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1288.032185] sd 2:0:0:0: [sdb] ASC=0x30 <<vendor>>ASCQ=0x85
[ 1288.032192] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[ 1288.032196] sd 2:0:0:0: [sdb] 0-byte physical blocks