API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 1st, 2018
375
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.67 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Linux version 3.4.0-cyanogenmod-g038b223-dirty (user@inp1wst007) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Feb 1 11:10:16 UTC 2018
  3. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  5. [ 0.000000] Machine: QCT APQ8064 MAKO
  6. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  7. [ 0.000000] Physical memory hole is not aligned. There will be a virtual memory hole from cd800000 to cd900000
  8. [ 0.000000] memory pool 3 (start 0xfe100000 size 1e00000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] On node 0 totalpages: 481791
  15. [ 0.000000] free_area_init_node: node 0, pgdat c0ffc040, node_mem_map c168f000
  16. [ 0.000000] Normal zone: 1576 pages used for memmap
  17. [ 0.000000] Normal zone: 0 pages reserved
  18. [ 0.000000] Normal zone: 165848 pages, LIFO batch:31
  19. [ 0.000000] HighMem zone: 2516 pages used for memmap
  20. [ 0.000000] HighMem zone: 311851 pages, LIFO batch:31
  21. [ 0.000000] allocating 21626880 bytes at c2695000 (82895000 physical) for fb
  22. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c3b38000 s16448 r0 d16320 u32768
  23. [ 0.000000] pcpu-alloc: s16448 r0 d16320 u32768 alloc=8*4096
  24. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 477699
  26. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31 audit=0 selinux=0 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.emmc=true androidboot.serialno=04fdf142dac98dcb androidboot.bootloader=MAKOZ30f androidboot.baseband=mdm bootreason=reboot
  27. [ 0.000000] audit: disabled (until reboot)
  28. [ 0.000000] UART CONSOLE : enable
  29. [ 0.000000] kcal is 0|0|0|x
  30. [ 0.000000] kcal not calibrated yet : 120
  31. [ 0.000000] set to default : 255
  32. [ 0.000000] BOARD : LGE input rev_11
  33. [ 0.000000] BOARD : LGE matched rev_11
  34. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  35. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  36. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  37. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1412MB 0MB = 1881MB total
  38. [ 0.000000] Memory: 1870016k/1870016k available, 185148k reserved, 1257468K highmem
  39. [ 0.000000] Virtual kernel memory layout:
  40. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  41. [ 0.000000] timers : 0xfffef000 - 0xffff0000 ( 4 kB)
  42. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  43. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  44. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  45. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  46. [ 0.000000] .text : 0xc0008000 - 0xc0d1fa44 (13407 kB)
  47. [ 0.000000] .init : 0xc0e00000 - 0xc0f18040 (1121 kB)
  48. [ 0.000000] .data : 0xc0f1a000 - 0xc1001a00 ( 927 kB)
  49. [ 0.000000] .bss : 0xc1001a24 - 0xc11dc82c (1900 kB)
  50. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  51. [ 0.000000] Preemptible hierarchical RCU implementation.
  52. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  53. [ 0.000000] NR_IRQS:921
  54. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  55. [ 0.000000] Switching to timer-based delay loop
  56. [ 0.000000] Console: colour dummy device 80x30
  57. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  58. [ 0.000213] pid_max: default: 32768 minimum: 301
  59. [ 0.000427] Security Framework initialized
  60. [ 0.000457] SELinux: Disabled at boot.
  61. [ 0.000549] Mount-cache hash table entries: 512
  62. [ 0.001770] Initializing cgroup subsys debug
  63. [ 0.001800] Initializing cgroup subsys cpuacct
  64. [ 0.001800] Initializing cgroup subsys freezer
  65. [ 0.001800] Initializing cgroup subsys net_cls
  66. [ 0.001831] Initializing cgroup subsys blkio
  67. [ 0.001861] Initializing cgroup subsys perf_event
  68. [ 0.001892] Initializing cgroup subsys net_prio
  69. [ 0.001892] Initializing cgroup subsys bfqio
  70. [ 0.002014] CPU: Testing write buffer coherency: ok
  71. [ 0.002319] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  72. [ 0.002319] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  73. [ 0.002410] Setting up static identity map for 0x80b08958 - 0x80b089e0
  74. [ 0.005981] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  75. [ 0.008148] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  76. [ 0.010345] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  77. [ 0.010498] Brought up 4 CPUs
  78. [ 0.010498] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  79. [ 0.012176] devtmpfs: initialized
  80. [ 0.029815] dummy:
  81. [ 0.030303] NET: Registered protocol family 16
  82. [ 0.031524] DMA: preallocated 256 KiB pool for atomic coherent allocations
  83. [ 0.031646] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  84. [ 0.034362] meminfo_init: smem ram ptable found: ver: 0 len: 6
  85. [ 0.034393] Found 2 memory banks grouped into 16 memory regions
  86. [ 0.034606] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  87. [ 0.035552] smem_find(137, 80): wrong size 72
  88. [ 0.035675] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  89. [ 0.035675] accessory_chip=0 hw_plat_subtype=1
  90. [ 0.035705] msm_rpm_init: RPM firmware 3.0.16842886
  91. [ 0.054748] msm_rpm_get_status(): Status id 433 not defined for target
  92. [ 0.054748] msm_rpm_get_status(): Status id 433 not defined for target
  93. [ 0.054779] msm_rpm_get_status(): Status id 433 not defined for target
  94. [ 0.054779] msm_rpm_get_status(): Status id 433 not defined for target
  95. [ 0.054779] msm_rpm_get_status(): Status id 433 not defined for target
  96. [ 0.054809] msm_rpm_get_status(): Status id 433 not defined for target
  97. [ 0.054809] msm_rpm_get_status(): Status id 433 not defined for target
  98. [ 0.054809] msm_rpm_get_status(): Status id 433 not defined for target
  99. [ 0.070495] pm8921_probe: PMIC revision 1: F4
  100. [ 0.070495] pm8921_probe: PMIC revision 2: 06
  101. [ 0.070526] pm8921_probe: PMIC version: PM8921 rev 3.0
  102. [ 0.070526] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
  103. [ 0.071685] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  104. [ 0.072174] pm_gpio_probe: OK: base=152, ngpio=44
  105. [ 0.072479] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  106. [ 0.072540] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  107. [ 0.074584] pm8821_probe: PMIC revision 1: PM8821 rev F3
  108. [ 0.074584] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  109. [ 0.074615] pm8821_probe: PMIC version: PM8821 ver 2.1
  110. [ 0.075164] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  111. [ 0.075225] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  112. [ 0.075714] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  113. [ 0.076995] saw_probe: id=0, name=8921_s5
  114. [ 0.077331] saw_probe: id=1, name=8921_s6
  115. [ 0.077667] saw_probe: id=2, name=8821_s0
  116. [ 0.078002] saw_probe: id=3, name=8821_s1
  117. [ 0.086791] persistent_ram: found existing buffer, size 36579, start 36579
  118. [ 0.210876] console [ram-1] enabled
  119. [ 0.212310] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  120. [ 0.212493] [DEBUG] uart_enable : 1
  121. [ 0.215057] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  122. [ 0.215393] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  123. [ 0.215576] hw-breakpoint: maximum watchpoint size is 8 bytes.
  124. [ 0.219024] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  125. [ 0.219146] sps:BAM 0x12244000 is registered.
  126. [ 0.219818] sps:sps is ready.
  127. [ 0.249053] bio: create slab <bio-0> at 0
  128. [ 0.249908] ION heap vmalloc created
  129. [ 0.250122] ION heap mm created at a0000000 with size 5c00000
  130. [ 0.250244] ION heap mm_fw created at 9fe00000 with size 1e0000
  131. [ 0.250457] ION heap mfc created at a5c00000 with size 2000
  132. [ 0.250579] ION heap iommu created
  133. [ 0.250732] ION heap qsecom created at fe109000 with size 780000
  134. [ 0.251007] ION heap audio created at fe889000 with size 4cf000
  135. [ 0.251129] ion_heap_create: Invalid heap type 3
  136. [ 0.252410] pm8xxx_pwm_probe: OK
  137. [ 0.253143] SCSI subsystem initialized
  138. [ 0.253570] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  139. [ 0.253753] sps:BAM 0x28084000 is registered.
  140. [ 0.254669] usbcore: registered new interface driver usbfs
  141. [ 0.255004] usbcore: registered new interface driver hub
  142. [ 0.255279] usbcore: registered new device driver usb
  143. [ 0.255859] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  144. [ 0.256805] Linux media interface: v0.10
  145. [ 0.256988] Linux video capture interface: v2.00
  146. [ 0.257415] Registered led device: red
  147. [ 0.257781] Registered led device: green
  148. [ 0.258117] Registered led device: blue
  149. [ 0.259033] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  150. [ 0.259338] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  151. [ 0.259643] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  152. [ 0.259857] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  153. [ 0.260131] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  154. [ 0.260345] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  155. [ 0.260650] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  156. [ 0.260925] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  157. [ 0.261199] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  158. [ 0.261474] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  159. [ 0.261779] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  160. [ 0.262023] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  161. [ 0.262603] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  162. [ 0.262878] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  163. [ 0.263244] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  164. [ 0.263610] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  165. [ 0.263885] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  166. [ 0.264282] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  167. [ 0.264617] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  168. [ 0.264892] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  169. [ 0.265258] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  170. [ 0.265533] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  171. [ 0.265899] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  172. [ 0.266235] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  173. [ 0.266571] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  174. [ 0.266967] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  175. [ 0.267272] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  176. [ 0.267700] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  177. [ 0.268127] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  178. [ 0.268402] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  179. [ 0.268737] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  180. [ 0.269165] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  181. [ 0.269500] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  182. [ 0.269866] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  183. [ 0.270111] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  184. [ 0.270385] Advanced Linux Sound Architecture Driver Version 1.0.25.
  185. [ 0.271179] Bluetooth: Core ver 2.16
  186. [ 0.271331] NET: Registered protocol family 31
  187. [ 0.271423] Bluetooth: HCI device and connection manager initialized
  188. [ 0.271636] Bluetooth: HCI socket layer initialized
  189. [ 0.271728] Bluetooth: L2CAP socket layer initialized
  190. [ 0.272216] Bluetooth: SCO socket layer initialized
  191. [ 0.272613] cfg80211: Calling CRDA to update world regulatory domain
  192. [ 0.272827] cfg80211: World regulatory domain updated:
  193. [ 0.272949] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  194. [ 0.273132] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  195. [ 0.273315] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  196. [ 0.273437] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  197. [ 0.273620] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  198. [ 0.273803] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  199. [ 0.274658] earjack debugger probed
  200. [ 0.275848] Switching to clocksource gp_timer
  201. [ 0.318023] NET: Registered protocol family 2
  202. [ 0.318389] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  203. [ 0.319183] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  204. [ 0.320587] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  205. [ 0.321319] TCP: Hash tables configured (established 131072 bind 65536)
  206. [ 0.321533] TCP: reno registered
  207. [ 0.321624] UDP hash table entries: 512 (order: 2, 16384 bytes)
  208. [ 0.321838] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  209. [ 0.322326] NET: Registered protocol family 1
  210. [ 0.322784] Trying to unpack rootfs image as initramfs...
  211. [ 0.351654] Freeing initrd memory: 552K
  212. [ 0.353668] Detected 5 counters on the L2CC PMU.
  213. [ 0.355957] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  214. [ 0.357788] pil_riva pil_riva: using secure boot
  215. [ 0.360931] pil_dsps pil_dsps: using secure boot
  216. [ 0.362457] pil_gss pil_gss: using secure boot
  217. [ 0.364959] smd_channel_probe_worker: allocation table not initialized
  218. [ 0.374633] msm_dsps driver version 4.03.
  219. [ 0.376617] NET: Registered protocol family 27
  220. [ 0.381408] lpass_fatal_init: lpass SSR driver init'ed.
  221. [ 0.381713] wcnss_8960: module initialized
  222. [ 0.382415] gss_8064_init: gss fatal driver init'ed.
  223. [ 0.383056] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  224. [ 0.383148] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  225. [ 0.385589] acpuclk-8064 acpuclk-8064: CPU Frequencies Supported: 12
  226. [ 0.386718] kcal_ctrl_init
  227. [ 0.388031] msm_rpm_log_probe: OK
  228. [ 0.391265] mdm_modem_probe: registered mdm id 0
  229. [ 0.391387] mdm_do_first_power_on:id 0: Powering on modem for the first time
  230. [ 0.458862] mdm_pblrdy_change: mdm id 0: pbl ready:1
  231. [ 0.667297] usbcore: registered new interface driver hsic_sysmon
  232. [ 0.672180] highmem bounce pool size: 64 pages
  233. [ 0.677642] fuse init (API version 7.18)
  234. [ 0.677947] msgmni has been set to 1197
  235. [ 0.679687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  236. [ 0.679809] io scheduler noop registered
  237. [ 0.679870] io scheduler deadline registered
  238. [ 0.679962] io scheduler row registered (default)
  239. [ 0.680175] io scheduler cfq registered
  240. [ 0.680358] io scheduler bfq registered
  241. [ 0.680480] BFQ I/O-scheduler: v7r8
  242. [ 0.680816] lm3530 probed
  243. [ 0.682220] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1d00000
  244. [ 0.682373] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf0140000
  245. [ 0.682769] mipi_lgit_lcd_probe start
  246. [ 0.682830] setting pdata->panel_info.fb_num to 3. type: 8
  247. [ 0.683074] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
  248. [ 0.690307] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  249. [ 0.690490] load_565rle_image: Can not open /initlogo.rle
  250. [ 0.690826] Registered led device: lcd-backlight
  251. [ 0.691528] setting pdata->panel_info.fb_num to 1. type: 7
  252. [ 0.692260] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  253. [ 0.692382] load_565rle_image: Can not open /initlogo.rle
  254. [ 0.692626] mdp4_dtv_vsync_init: ndx=0
  255. [ 0.692810] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eebaa808
  256. [ 0.692901] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
  257. [ 0.692901] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  258. [ 0.693359] setting pdata->panel_info.fb_num to 1. type: 10
  259. [ 0.693511] Inside writeback_driver_init
  260. [ 0.693756] Inside writeback_probe
  261. [ 0.694274] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  262. [ 0.694427] load_565rle_image: Can not open /initlogo.rle
  263.  
  264. [ 0.695373] msm_vidc_enc: Inside vid_enc_init()
  265.  
  266. [ 0.695800] msm_vidc_enc: Inside vid_enc_vcd_init()
  267. [ 0.696441] smux_init: unable to create log context
  268. [ 0.696960] msm_serial_hs module loaded
  269. [ 0.697143] msm_serial_hsl: detected port #0
  270. [ 0.697296] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  271. [ 0.697479] msm_serial_hsl: console setup on port #0
  272. [ 0.697662] console [ttyHSL0] enabled
  273. [ 0.697967] msm_serial_hsl: driver initialized
  274. [ 0.699005] msm_rotator_probe: rotator_hw_revision=2
  275. [ 0.700988] diagchar initialized now
  276. [ 0.701873] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  277. [ 0.708587] brd: module loaded
  278. [ 0.711120] loop: module loaded
  279. [ 0.712036] anx7808 init gpio
  280. [ 0.746307] anx7808 dvdd is already on
  281. [ 0.776702] sp_tx_hardware_poweron: anx7808 power on
  282. [ 0.777465] ANX7808 is found.
  283. [ 0.778717] 3.3V output disabled
  284. [ 0.836334] sp_tx_hardware_powerdown: anx7808 power down
  285. [ 0.836395] SP_TX To System State:
  286. [ 0.836486] STATE_CABLE_PLUG
  287. [ 0.836975] tabla2x-slim tabla2x-slim: Platform data from board file
  288. [ 0.902801] wcd9xxx_check_codec_type: codec is tabla_codec
  289. [ 0.902923] wcd9xxx_check_codec_type: Read codec idbytes & version
  290. [ 0.902954] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  291. [ 0.902954] byte_3[00000001] version = 2
  292. [ 0.903869] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  293. [ 0.903991] i2c-core: driver [tabla-i2c-core] using legacy resume method
  294. [ 0.904479] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  295. [ 0.904724] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  296. [ 0.904846] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  297. [ 0.905364] SCSI Media Changer driver v0.25
  298. [ 0.905670] tun: Universal TUN/TAP device driver, 1.6
  299. [ 0.905731] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  300. [ 0.905975] rmnet_init: BAM devices[8]
  301. [ 0.912902] PPP generic driver version 2.4.2
  302. [ 0.913085] PPP BSD Compression module registered
  303. [ 0.913208] PPP Deflate Compression module registered
  304. [ 0.913574] PPP MPPE Compression module registered
  305. [ 0.913696] NET: Registered protocol family 24
  306. [ 0.913787] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  307. [ 0.913909] CSLIP: code copyright 1989 Regents of the University of California.
  308. [ 0.914031] wcnss_wlan probed in built-in mode
  309. [ 0.914642] usbcore: registered new interface driver asix
  310. [ 0.914733] usbcore: registered new interface driver cdc_ether
  311. [ 0.914886] usbcore: registered new interface driver net1080
  312. [ 0.914978] usbcore: registered new interface driver cdc_subset
  313. [ 0.915100] usbcore: registered new interface driver zaurus
  314. [ 0.915313] usbcore: registered new interface driver cdc_ncm
  315. [ 0.915893] msm_otg msm_otg: msm_otg probe
  316. [ 0.915985] msm_otg msm_otg: failed to get phy_clk
  317. [ 0.916168] msm_otg msm_otg: OTG regs = f0174000
  318. [ 0.918243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  319. [ 0.930969] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  320. [ 0.931060] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  321. [ 0.956390] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  322. [ 0.976379] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  323. [ 0.976593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  324. [ 0.976745] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  325. [ 0.976806] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  326. [ 0.976928] usb usb1: Manufacturer: Linux 3.4.0-cyanogenmod-g038b223-dirty ehci_hcd
  327. [ 0.977050] usb usb1: SerialNumber: msm_hsic_host
  328. [ 0.977447] hub 1-0:1.0: USB hub found
  329. [ 0.977539] hub 1-0:1.0: 1 port detected
  330. [ 0.978332] usbcore: registered new interface driver cdc_acm
  331. [ 0.978393] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  332. [ 0.978546] Initializing USB Mass Storage driver...
  333. [ 0.978668] usbcore: registered new interface driver usb-storage
  334. [ 0.978790] USB Mass Storage support registered.
  335. [ 0.978881] usbcore: registered new interface driver ums-alauda
  336. [ 0.979034] usbcore: registered new interface driver ums-cypress
  337. [ 0.979095] usbcore: registered new interface driver ums-datafab
  338. [ 0.979248] usbcore: registered new interface driver ums-freecom
  339. [ 0.979339] usbcore: registered new interface driver ums-isd200
  340. [ 0.979492] usbcore: registered new interface driver ums-jumpshot
  341. [ 0.979583] usbcore: registered new interface driver ums-karma
  342. [ 0.979736] usbcore: registered new interface driver ums-onetouch
  343. [ 0.979858] usbcore: registered new interface driver ums-sddr09
  344. [ 0.979949] usbcore: registered new interface driver ums-sddr55
  345. [ 0.980102] usbcore: registered new interface driver ums-usbat
  346. [ 0.980224] usbcore: registered new interface driver usbserial
  347. [ 0.980346] usbserial: USB Serial Driver core
  348. [ 0.980438] usbcore: registered new interface driver qc_csvt
  349. [ 0.980529] USB Serial support registered for qc_csvt
  350. [ 0.980682] usbcore: registered new interface driver usb_ehset_test
  351. [ 0.980773] usbcore: registered new interface driver diag_bridge
  352. [ 0.981018] usbcore: registered new interface driver mdm_bridge
  353. [ 0.981597] usbcore: registered new interface driver ks_bridge
  354. [ 0.981658] ksb_init: init done
  355. [ 0.981964] msm_otg msm_otg: phy_reset: success
  356. [ 0.982482] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  357. [ 0.982666] mbim_init: initialize 1 instances
  358. [ 0.982910] mbim_init: Initialized 1 ports
  359. [ 0.984191] rndis_qc_init: initialize rndis QC instance
  360. [ 0.984527] android_usb gadget: Mass Storage Function, version: 2009/09/11
  361. [ 0.984649] android_usb gadget: Number of LUNs=1
  362. [ 0.984710] lun0: LUN: removable file: (no medium)
  363. [ 0.985107] android_usb gadget: android_usb ready
  364. [ 0.986083] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  365. [ 0.986694] [Touch D]touch enable
  366. [ 1.218505] [Touch] common[1] finger[17] flash[52] button[0]
  367. [ 1.219543] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E028.
  368. [ 1.221282] input: touch_dev as /devices/virtual/input/input2
  369. [ 1.221649] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  370. [ 1.221679] [Touch] Touch driver is initialized
  371. [ 1.221862] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  372. [ 1.222778] using rtc device, pm8xxx_rtc, for alarms
  373. [ 1.222839] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  374. [ 1.223236] i2c /dev entries driver
  375. [ 1.224395] __jrchoi: msm_sensor_init_module: E
  376. [ 1.251312] msm_eeprom_probe probe_fail
  377. [ 1.251739] msm_server_update_sensor_info mctl_node_name[0] = video1
  378. [ 1.279327] msm_eeprom_probe probe_fail
  379. [ 1.279754] msm_server_update_sensor_info mctl_node_name[1] = video3
  380. [ 1.282562] msm_cam_server_request_irq IRQ Router hw is not present.
  381. [ 1.283020] lm3559_init
  382. [ 1.283233] Registered led device: spotlight
  383. [ 1.283630] usbcore: registered new interface driver uvcvideo
  384. [ 1.283691] USB Video Class driver (1.1.1)
  385. [ 1.305847] pm8xxx_tm_probe: OK
  386. [ 1.306182] pm8xxx_tm_probe: OK
  387. [ 1.306793] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  388. [ 1.307006] Bluetooth: HCI UART driver ver 2.2
  389. [ 1.307128] Bluetooth: HCI H4 protocol initialized
  390. [ 1.308013] cpuidle: using governor ladder
  391. [ 1.308074] cpuidle: using governor menu
  392. [ 1.308410] mmc0: SDCC Version: 0x0000001a
  393. [ 1.309478] mmc0: bam physical base=0x12402000
  394. [ 1.309539] mmc0: bam virtual base=0xf01b4000
  395. [ 1.309661] sps:BAM 0x12402000 is registered.
  396. [ 1.309722] mmc0: BAM device registered. bam_handle=0xee691200
  397. [ 1.310028] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  398. [ 1.310302] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  399. [ 1.310516] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  400. [ 1.310607] mmc0: No card detect facilities available
  401. [ 1.312347] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  402. [ 1.312438] mmc0: Controller capabilities: 0x0000039e
  403. [ 1.312499] mmc0: 8 bit data mode enabled
  404. [ 1.312561] mmc0: 4 bit data mode disabled
  405. [ 1.312683] mmc0: polling status mode disabled
  406. [ 1.312744] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  407. [ 1.312896] mmc0: Slot eject status = 0
  408. [ 1.312957] mmc0: Power save feature enable = 1
  409. [ 1.313049] mmc0: SPS-BAM data transfer mode available
  410. [ 1.313537] usbcore: registered new interface driver usbhid
  411. [ 1.313629] usbhid: USB HID core driver
  412. [ 1.314239] ashmem: initialized
  413. [ 1.314727] usbcore: registered new interface driver snd-usb-audio
  414. [ 1.315551] tabla_probe
  415. [ 1.316040] amp_enable: amp enable bypass(2)
  416. [ 1.316131] amp_enable: AMP_EN is set to 0
  417. [ 1.316680] msm_pcm_probe: dev name msm-voip-dsp
  418. [ 1.316925] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  419. [ 1.317138] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  420. [ 1.317291] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  421. [ 1.317962] msm_pcm_probe: dev name msm-pcm-dsp
  422. [ 1.318237] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  423. [ 1.318542] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  424. [ 1.318664] adding pm_qos request in low latency driver
  425. [ 1.318725] done adding pm_qos request in low latency driver
  426. [ 1.319335] msm_compr_probe: dev name msm-compr-dsp
  427. [ 1.319702] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  428. [ 1.320343] msm8930_audio_init: Not the right machine type
  429. [ 1.320404] msm_audio_init: Not the right machine type
  430. [ 1.320526] msm_audio_init: Not APQ8064 in I2S mode
  431. [ 1.384307] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  432. [ 1.384429] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  433. [ 1.384490] usb 1-1: Product: QHSUSB__BULK
  434. [ 1.389831] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  435. [ 1.405120] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  436. [ 1.406066] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  437. [ 1.407012] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  438. [ 1.407958] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  439. [ 1.408843] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  440. [ 1.409790] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  441. [ 1.410705] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  442. [ 1.411621] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  443. [ 1.412475] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  444. [ 1.413452] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  445. [ 1.414337] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  446. [ 1.415283] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  447. [ 1.416168] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  448. [ 1.417175] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  449. [ 1.418060] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  450. [ 1.419250] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  451. [ 1.421997] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  452. [ 1.422912] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  453. [ 1.423736] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  454. [ 1.424621] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  455. [ 1.425445] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  456. [ 1.426330] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  457. [ 1.427215] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  458. [ 1.428100] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  459. [ 1.428924] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  460. [ 1.429809] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  461. [ 1.430664] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  462. [ 1.431549] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  463. [ 1.432373] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  464. [ 1.433288] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  465. [ 1.434143] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  466. [ 1.435058] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  467. [ 1.435913] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  468. [ 1.436828] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  469. [ 1.437652] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  470. [ 1.438537] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  471. [ 1.439392] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  472. [ 1.441802] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  473. [ 1.442138] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  474. [ 1.444427] mmc0: new HS200 MMC card at address 0001
  475. [ 1.444946] mmcblk0: mmc0:0001 016G92 14.6 GiB
  476. [ 1.446166] oprofile: using arm/armv7-krait
  477. [ 1.446380] u32 classifier
  478. [ 1.446472] Actions configured
  479. [ 1.446563] Netfilter messages via NETLINK v0.30.
  480. [ 1.446685] nfnl_acct: registering with nfnetlink.
  481. [ 1.446807] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  482. [ 1.447387] ctnetlink v0.93: registering with nfnetlink.
  483. [ 1.447479] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  484. [ 1.447601] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  485. [ 1.447937] xt_time: kernel timezone is -0000
  486. [ 1.448272] ip_tables: (C) 2000-2006 Netfilter Core Team
  487. [ 1.448577] arp_tables: (C) 2002 David S. Miller
  488. [ 1.448669] TCP: cubic registered
  489. [ 1.448822] Initializing XFRM netlink socket
  490. [ 1.449249] NET: Registered protocol family 10
  491. [ 1.449615] Alternate GPT is invalid, using primary GPT.
  492. [ 1.449798] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  493. [ 1.452331] Mobile IPv6
  494. [ 1.452484] ip6_tables: (C) 2000-2006 Netfilter Core Team
  495. [ 1.452758] IPv6 over IPv4 tunneling driver
  496. [ 1.453399] NET: Registered protocol family 17
  497. [ 1.453491] NET: Registered protocol family 15
  498. [ 1.453674] Bridge firewalling registered
  499. [ 1.453918] Bluetooth: RFCOMM TTY layer initialized
  500. [ 1.453979] Bluetooth: RFCOMM socket layer initialized
  501. [ 1.454101] Bluetooth: RFCOMM ver 1.11
  502. [ 1.454193] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  503. [ 1.454315] Bluetooth: BNEP filters: protocol multicast
  504. [ 1.454376] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  505. [ 1.454528] L2TP core driver, V2.0
  506. [ 1.454620] PPPoL2TP kernel driver, V2.0
  507. [ 1.455200] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  508. [ 1.455413] Registering SWP/SWPB emulation handler
  509. [ 1.455474] clock_late_init: Removing enables held for handed-off clocks
  510. [ 1.459228] MSM Watchdog Initialized
  511. [ 1.469512] registered taskstats version 1
  512. [ 1.470947] read_ocv_trim: program rev reg is 0x34
  513. [ 1.471008] read_ocv_trim: trim reg is 0x45
  514. [ 1.471099] read_ocv_trim: trim delta is 4
  515. [ 1.471252] pm8921_is_usb_chg_plugged_in: called before init
  516. [ 1.473663] pm8921_is_usb_chg_plugged_in: called before init
  517. [ 1.475036] pm8921_is_usb_chg_plugged_in: called before init
  518. [ 1.475158] ocv_ir_compensation: comp ocv = 4016862, ocv = 4013271, ibatt_ua = 16400, rbatt_mohm = 219
  519. [ 1.475311] read_soc_params_raw: discard shutdown soc! cc_raw = 0x11e80a
  520. [ 1.475524] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  521. [ 1.475585] pm8921_is_batfet_closed: called before init
  522. [ 1.496643] pm8921_is_usb_chg_plugged_in: called before init
  523. [ 1.496734] adjust_soc: ibat_ua = 342800, vbat_uv = 3910611, soc = 70, batt_temp=292
  524. [ 1.499359] pm8921_get_batt_state: called before init
  525. [ 1.499511] pm8921_bms_probe: OK battery_capacity_at_boot=70 volt = 3918201 ocv = 4016642
  526. [ 1.500549] power_supply usb: driver failed to report `present' property: 4294967274
  527. [ 1.500732] power_supply usb: driver failed to report `present' property: 4294967274
  528. [ 1.500915] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  529. [ 1.501037] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  530. [ 1.502349] pm8921_get_batt_state: called before init
  531. [ 1.504699] pm8921_get_batt_state: called before init
  532. [ 1.510925] wlc: bq51051b_wlc_probe: probe
  533. [ 1.511016] wlc: bq51051b_wlc_hw_init: hw_init
  534. [ 1.511260] power_supply wireless: driver failed to report `present' property: 4294967274
  535. [ 1.511444] power_supply wireless: driver failed to report `present' property: 4294967274
  536. [ 1.511688] [Touch] CHARGER = 1
  537. [ 1.512207] batt_temp_ctrl_init
  538. [ 1.512359] batt_temp_ctrl_probe
  539. [ 1.512634] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2018-02-01 11:10:53 UTC (1517483453)
  540. [ 1.514190] android_vibrator: default amplitude 88
  541. [ 1.514312] android vibrator probed
  542. [ 1.514556] fsa8008 init
  543. [ 1.514831] fsa8008 probe
  544. [ 1.514923] hsd_probe: hi->irq_detect = 369
  545. [ 1.515106] hsd_probe: hi->irq_key = 371
  546. [ 1.515411] input: hs_detect as /devices/virtual/input/input5
  547. [ 1.515686] ALSA device list:
  548. [ 1.515838] #0: apq8064-tabla-snd-card
  549. [ 1.516174] Freeing init memory: 96K
  550. [ 1.636749] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
  551. [ 1.636901] msm_otg msm_otg: Avail curr from USB = 500
  552. [ 1.637207] msm_otg msm_otg: current: 0 -> 500 (mA)
  553. [ 1.637329] pm_power_set_property_usb: usb_target_ma 0
  554. [ 1.640747] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  555. [ 2.046905] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
  556. [ 3.988250] EXT3-fs (mmcblk0p23): error: couldn't mount because of unsupported optional features (40)
  557. [ 3.997619] EXT2-fs (mmcblk0p23): error: couldn't mount because of unsupported optional features (40)
  558. [ 4.006622] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
  559. [ 4.175506] enable_store: android_usb: already disabled
  560. [ 4.192352] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
  561. [ 4.192504] android_usb gadget: using random self ethernet address
  562. [ 4.192626] android_usb gadget: using random host ethernet address
  563. [ 4.193145] usb0: MAC 32:ec:5e:cc:bb:f0
  564. [ 4.193206] usb0: HOST MAC 42:e0:34:d2:84:29
  565. [ 4.201568] ADDRCONF(NETDEV_UP): usb0: link is not ready
  566. [ 4.391662] android_work: android_work: did not send uevent (0 0 (null))
  567. [ 4.510223] android_work: android_work: sent uevent USB_STATE=CONNECTED
  568. [ 4.513763] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  569. [ 4.650177] android_work: android_work: sent uevent USB_STATE=CONNECTED
  570. [ 4.651702] android_usb gadget: high-speed config #1: android_usb
  571. [ 4.652954] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
  572. [ 4.707183] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  573. [ 5.317321] EXT4-fs (mmcblk0p23): re-mounted. Opts: (null)
  574. [ 5.338684] preinit: (5.33) Welcome to SailfishOS 2.1.3.7 (Kymijoki) (armv7hl)
  575. [ 5.359008] preinit: (5.35) is_erase_needed: No : 0
  576. [ 5.396575] preinit: (5.38) get_bootstate: USER : 0
  577. [ 5.397430] preinit: (5.39) BOOTSTATE = USER
  578. [ 5.399017] preinit: (5.39) Booting to default.target
  579. [ 5.425689] systemd[1]: Failed to mount cgroup at /sys/fs/cgroup/systemd: No such file or directory
  580. [ 5.430541] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  581. [ 5.430877] systemd[1]: Detected architecture arm.
  582. [ 5.447784] systemd[1]: Set hostname to <Sailfish>.
  583. [ 5.450164] systemd[1]: Cannot determine cgroup we are running in: No such file or directory
  584. [ 5.450378] systemd[1]: Failed to allocate manager object: No such file or directory
  585. [ 6.647979] msm_ta_detect_work: USB exit ta detection - frindex
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!