Bullet64

rockpro64_spi_uboot_boot_ok

Nov 13th, 2018
199
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. DDR Version 1.13 20180801
  2. In
  3. Channel 0: LPDDR4,50MHz
  4. CS = 0
  5. MR0=0x98
  6. MR4=0x3
  7. MR5=0xFF
  8. MR8=0x8
  9. MR12=0x4D
  10. MR14=0x4D
  11. MR18=0x0
  12. MR19=0x0
  13. MR24=0x8
  14. MR25=0x0
  15. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  16. Channel 1: LPDDR4,50MHz
  17. CS = 0
  18. MR0=0x98
  19. MR4=0x3
  20. MR5=0xFF
  21. MR8=0x8
  22. MR12=0x4D
  23. MR14=0x4D
  24. MR18=0x0
  25. MR19=0x0
  26. MR24=0x8
  27. MR25=0x0
  28. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  29. 256B stride
  30. channel 0
  31. CS = 0
  32. MR0=0x98
  33. MR4=0x3
  34. MR5=0xFF
  35. MR8=0x8
  36. MR12=0x72
  37. MR14=0x72
  38. MR18=0x0
  39. MR19=0x0
  40. MR24=0x8
  41. MR25=0x0
  42. channel 1
  43. CS = 0
  44. MR0=0x98
  45. MR4=0x3
  46. MR5=0xFF
  47. MR8=0x8
  48. MR12=0x72
  49. MR14=0x72
  50. MR18=0x0
  51. MR19=0x0
  52. MR24=0x8
  53. MR25=0x0
  54. channel 0 training pass!
  55. channel 1 training pass!
  56. change freq to 400MHz 0,1
  57. channel 0
  58. CS = 0
  59. MR0=0x98
  60. MR4=0x3
  61. MR5=0xFF
  62. MR8=0x8
  63. MR12=0x72
  64. MR14=0x72
  65. MR18=0x0
  66. MR19=0x0
  67. MR24=0x8
  68. MR25=0x0
  69. channel 1
  70. CS = 0
  71. MR0=0x98
  72. MR4=0x3
  73. MR5=0xFF
  74. MR8=0x8
  75. MR12=0x72
  76. MR14=0x72
  77. MR18=0x0
  78. MR19=0x0
  79. MR24=0x8
  80. MR25=0x0
  81. channel 0 training pass!
  82. channel 1 training pass!
  83. change freq to 800MHz 1,0
  84. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  85. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  86. pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
  87. OUT
  88. U-Boot SPL board init
  89.  
  90. U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09)
  91. booted from SPI flash
  92. Trying to boot from SPI
  93. NOTICE: BL31: v1.3(debug):65aa5ce
  94. NOTICE: BL31: Built : 10:47:37, Jun 19 2018
  95. NOTICE: BL31: Rockchip release version: v1.1
  96. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  97. INFO: Using opteed sec cpu_context!
  98. INFO: boot cpu mask: 0
  99. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  100. INFO: BL31: Initializing runtime services
  101. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
  102. ERROR: Error initializing runtime service opteed_fast
  103. INFO: BL31: Preparing for EL3 exit to normal world
  104. INFO: Entry point address = 0x200000
  105. INFO: SPSR = 0x3c9
  106.  
  107.  
  108. U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000)
  109.  
  110. Model: Pine64 RockPro64
  111. DRAM: 2 GiB
  112. DCDC_REG1@vdd_center: ; enabling
  113. DCDC_REG2@vdd_cpu_l: ; enabling
  114. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  115. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  116. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  117. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  118. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  119. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  120. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  121. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  122. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  123. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  124. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  125. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  126. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  127. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  128. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  129. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  130. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  131. vdd-log@vdd_log: ; enabling (ret: -38)
  132. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  133. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  134. *** Warning - bad CRC, using default environment
  135.  
  136. In: serial@ff1a0000
  137. Out: serial@ff1a0000
  138. Err: serial@ff1a0000
  139. Model: Pine64 RockPro64
  140. Net: eth0: ethernet@fe300000
  141. Hit any key to stop autoboot: 0
  142. Card did not respond to voltage select!
  143. mmc_init: -95, time 20
  144. Card did not respond to voltage select!
  145. mmc_init: -95, time 9
  146. starting USB...
  147. USB0: USB EHCI 1.00
  148. USB1: USB EHCI 1.00
  149. USB2: Register 2000140 NbrPorts 2
  150. Starting the controller
  151. USB XHCI 1.10
  152. USB3: Register 2000140 NbrPorts 2
  153. Starting the controller
  154. USB XHCI 1.10
  155. scanning bus 0 for devices... 1 USB Device(s) found
  156. scanning bus 1 for devices... 1 USB Device(s) found
  157. scanning bus 2 for devices... 1 USB Device(s) found
  158. scanning bus 3 for devices... 2 USB Device(s) found
  159. scanning usb for storage devices... 1 Storage Device(s) found
  160.  
  161. Device 0: Vendor: SanDisk Rev: Z320 Prod: SDSSDA240G
  162. Type: Hard Disk
  163. Capacity: 228936.5 MB = 223.5 GB (468862128 x 512)
  164. ... is now current device
  165. Scanning usb 0:7...
  166. Found /boot/extlinux/extlinux.conf
  167. Retrieving file: /boot/extlinux/extlinux.conf
  168. 1055 bytes read in 191 ms (4.9 KiB/s)
  169. select kernel
  170. 1: kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
  171. 2: kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1-memtest
  172. Enter choice: 1: kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
  173. Retrieving file: /boot/initrd.img-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
  174. 6527240 bytes read in 458 ms (13.6 MiB/s)
  175. Retrieving file: /boot/vmlinuz-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
  176. 19986440 bytes read in 1002 ms (19 MiB/s)
  177. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  178. Retrieving file: /boot/dtbs/4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1/rockchipb
  179. 88003 bytes read in 996 ms (85.9 KiB/s)
  180. ## Flattened Device Tree blob at 01f00000
  181. Booting using the fdt blob at 0x1f00000
  182. Loading Ramdisk to 7d8c9000, end 7df02908 ... OK
  183. Loading Device Tree to 000000007d8b0000, end 000000007d8c87c2 ... OK
  184.  
  185. Starting kernel ...
  186.  
  187. [ 0.000000] Booting Linux on physical CPU 0x0
  188. [ 0.000000] Initializing cgroup subsys cpuset
  189. [ 0.000000] Initializing cgroup subsys cpu
  190. [ 0.000000] Initializing cgroup subsys cpuacct
  191. [ 0.000000] Linux version 4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1 (root@r8
  192. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  193. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  194. [ 0.000000] bootconsole [uart0] enabled
  195. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  196. [ 0.000000] psci: probing for conduit method from DT.
  197. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  198. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  199. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  200. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef2000 s46248 r8192 d316
  201. [ 0.000000] Detected VIPT I-cache on CPU0
  202. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  203. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  204. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  205. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  206. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  207. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  208. [ 0.000000] software IO TLB [mem 0x7feaa000-0x7feea000] (0MB) mapped at [fff]
  209. [ 0.000000] Memory: 2031076K/2095104K available (12158K kernel code, 1726K r)
  210. [ 0.000000] Virtual kernel memory layout:
  211. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  212. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  213. [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 )
  214. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 )
  215. [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 )
  216. [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 )
  217. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  218. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  219. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  220. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  221. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  222. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  223. [ 0.000000] Hierarchical RCU implementation.
  224. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  225. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  226. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  227. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  228. [ 0.000000] GIC: Using split EOI/Deactivate mode
  229. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  230. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  231. [ 0.000000] ITS: using cache flushing for cmd queue
  232. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  233. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  234. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  235. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  236. [ 0.000000] GIC: using cache flushing for LPI property table
  237. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  238. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  239. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  240. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  241. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  242. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  243. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  244. [ 0.002045] Console: colour dummy device 80x25
  245. [ 0.002466] console [tty0] enabled
  246. [ 0.002790] bootconsole [uart0] disabled
  247. [ 0.000000] Booting Linux on physical CPU 0x0
  248. [ 0.000000] Initializing cgroup subsys cpuset
  249. [ 0.000000] Initializing cgroup subsys cpu
  250. [ 0.000000] Initializing cgroup subsys cpuacct
  251. [ 0.000000] Linux version 4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1 (root@r8
  252. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  253. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  254. [ 0.000000] bootconsole [uart0] enabled
  255. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  256. [ 0.000000] psci: probing for conduit method from DT.
  257. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  258. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  259. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  260. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef2000 s46248 r8192 d316
  261. [ 0.000000] Detected VIPT I-cache on CPU0
  262. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  263. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  264. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  265. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  266. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  267. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  268. [ 0.000000] software IO TLB [mem 0x7feaa000-0x7feea000] (0MB) mapped at [fff]
  269. [ 0.000000] Memory: 2031076K/2095104K available (12158K kernel code, 1726K r)
  270. [ 0.000000] Virtual kernel memory layout:
  271. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  272. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  273. [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 )
  274. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 )
  275. [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 )
  276. [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 )
  277. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  278. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  279. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  280. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  281. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  282. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  283. [ 0.000000] Hierarchical RCU implementation.
  284. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  285. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  286. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  287. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  288. [ 0.000000] GIC: Using split EOI/Deactivate mode
  289. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  290. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  291. [ 0.000000] ITS: using cache flushing for cmd queue
  292. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  293. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  294. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  295. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  296. [ 0.000000] GIC: using cache flushing for LPI property table
  297. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  298. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  299. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  300. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  301. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  302. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  303. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  304. [ 0.002045] Console: colour dummy device 80x25
  305. [ 0.002466] console [tty0] enabled
  306. [ 0.002790] bootconsole [uart0] disabled
  307. [ 0.003176] Calibrating delay loop (skipped), value calculated using timer f)
  308. [ 0.003203] pid_max: default: 32768 minimum: 301
  309. [ 0.003320] Security Framework initialized
  310. [ 0.003336] Yama: becoming mindful.
  311. [ 0.003366] AppArmor: AppArmor disabled by boot time parameter
  312. [ 0.003430] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  313. [ 0.003451] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  314. [ 0.004138] Initializing cgroup subsys io
  315. [ 0.004163] Initializing cgroup subsys memory
  316. [ 0.004200] Initializing cgroup subsys devices
  317. [ 0.004220] Initializing cgroup subsys freezer
  318. [ 0.004240] Initializing cgroup subsys net_cls
  319. [ 0.004259] Initializing cgroup subsys perf_event
  320. [ 0.004279] Initializing cgroup subsys net_prio
  321. [ 0.004302] Initializing cgroup subsys hugetlb
  322. [ 0.004319] Initializing cgroup subsys pids
  323. [ 0.004366] ftrace: allocating 45075 entries in 177 pages
  324. [ 0.110821] sched-energy: Sched-energy-costs installed from DT
  325. [ 0.110849] CPU0: update cpu_capacity 401
  326. [ 0.110912] ASID allocator initialised with 32768 entries
  327. [ 0.113926] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  328. [ 0.114381] Platform MSI: /interrupt-controller@fee00000/interrupt-controlled
  329. [ 0.115659] Detected VIPT I-cache on CPU1
  330. [ 0.115689] CPU1: found redistributor 1 region 0:0x00000000fef20000
  331. [ 0.115714] CPU1: using LPI pending table @0x000000007cf30000
  332. [ 0.115757] CPU1: update cpu_capacity 401
  333. [ 0.115761] CPU1: Booted secondary processor [410fd034]
  334. [ 0.116291] Detected VIPT I-cache on CPU2
  335. [ 0.116311] CPU2: found redistributor 2 region 0:0x00000000fef40000
  336. [ 0.116334] CPU2: using LPI pending table @0x000000007cf60000
  337. [ 0.116362] CPU2: update cpu_capacity 401
  338. [ 0.116365] CPU2: Booted secondary processor [410fd034]
  339. [ 0.116877] Detected VIPT I-cache on CPU3
  340. [ 0.116897] CPU3: found redistributor 3 region 0:0x00000000fef60000
  341. [ 0.116919] CPU3: using LPI pending table @0x000000007cfb0000
  342. [ 0.116945] CPU3: update cpu_capacity 401
  343. [ 0.116949] CPU3: Booted secondary processor [410fd034]
  344. [ 0.117461] Detected PIPT I-cache on CPU4
  345. [ 0.117484] CPU4: found redistributor 100 region 0:0x00000000fef80000
  346. [ 0.117519] CPU4: using LPI pending table @0x000000007cfe0000
  347. [ 0.117554] CPU4: update cpu_capacity 1024
  348. [ 0.117557] CPU4: Booted secondary processor [410fd082]
  349. [ 0.118129] Detected PIPT I-cache on CPU5
  350. [ 0.118147] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  351. [ 0.118180] CPU5: using LPI pending table @0x000000007c420000
  352. [ 0.118206] CPU5: update cpu_capacity 1024
  353. [ 0.118209] CPU5: Booted secondary processor [410fd082]
  354. [ 0.118291] Brought up 6 CPUs
  355. [ 0.118970] SMP: Total of 6 processors activated.
  356. [ 0.119002] CPU features: detected feature: GIC system register CPU interface
  357. [ 0.119039] CPU: All CPU(s) started at EL2
  358. [ 0.119104] alternatives: patching kernel code
  359. [ 0.120486] devtmpfs: initialized
  360. [ 0.135949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  361. [ 0.136004] futex hash table entries: 2048 (order: 5, 131072 bytes)
  362. [ 0.136479] xor: measuring software checksum speed
  363. [ 0.173921] 8regs : 2874.000 MB/sec
  364. [ 0.213982] 8regs_prefetch: 2570.000 MB/sec
  365. [ 0.254044] 32regs : 3243.000 MB/sec
  366. [ 0.294105] 32regs_prefetch: 2864.000 MB/sec
  367. [ 0.294125] xor: using function: 32regs (3243.000 MB/sec)
  368. [ 0.294160] pinctrl core: initialized pinctrl subsystem
  369. [ 0.295732] Failed to find legacy iommu devices
  370. [ 0.296120] NET: Registered protocol family 16
  371. [ 0.306451] cpuidle: using governor ladder
  372. [ 0.318474] cpuidle: using governor menu
  373. [ 0.318803] vdso: 2 pages (1 code @ ffffff8008c66000, 1 data @ ffffff80091e4)
  374. [ 0.318857] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  375. [ 0.319291] DMA: preallocated 1024 KiB pool for atomic allocations
  376. [ 0.426362] raid6: int64x1 gen() 474 MB/s
  377. [ 0.494478] raid6: int64x1 xor() 409 MB/s
  378. [ 0.562590] raid6: int64x2 gen() 656 MB/s
  379. [ 0.630659] raid6: int64x2 xor() 599 MB/s
  380. [ 0.698734] raid6: int64x4 gen() 1002 MB/s
  381. [ 0.766860] raid6: int64x4 xor() 676 MB/s
  382. [ 0.834943] raid6: int64x8 gen() 768 MB/s
  383. [ 0.903050] raid6: int64x8 xor() 632 MB/s
  384. [ 0.971179] raid6: neonx1 gen() 995 MB/s
  385. [ 1.039285] raid6: neonx1 xor() 677 MB/s
  386. [ 1.107358] raid6: neonx2 gen() 1331 MB/s
  387. [ 1.175465] raid6: neonx2 xor() 993 MB/s
  388. [ 1.243583] raid6: neonx4 gen() 1791 MB/s
  389. [ 1.311674] raid6: neonx4 xor() 1198 MB/s
  390. [ 1.379785] raid6: neonx8 gen() 1696 MB/s
  391. [ 1.447868] raid6: neonx8 xor() 1266 MB/s
  392. [ 1.447887] raid6: using algorithm neonx4 gen() 1791 MB/s
  393. [ 1.447906] raid6: .... xor() 1198 MB/s, rmw enabled
  394. [ 1.447924] raid6: using intx1 recovery algorithm
  395. [ 1.449492] vcc3v3_pcie: supplied by dc_12v
  396. [ 1.450039] vcc_sys: supplied by dc_12v
  397. [ 1.450554] vcc3v3_sys: supplied by vcc_sys
  398. [ 1.451669] iommu: Adding device ff8f0000.vop to group 0
  399. [ 1.451769] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  400. [ 1.451790] iommu: Removing device ff8f0000.vop from group 0
  401. [ 1.451866] iommu: Adding device ff900000.vop to group 0
  402. [ 1.453064] SCSI subsystem initialized
  403. [ 1.453408] usbcore: registered new interface driver usbfs
  404. [ 1.453465] usbcore: registered new interface driver hub
  405. [ 1.453556] usbcore: registered new device driver usb
  406. [ 1.453663] media: Linux media interface: v0.10
  407. [ 1.453712] Linux video capture interface: v2.00
  408. [ 1.453788] pps_core: LinuxPPS API ver. 1 registered
  409. [ 1.453808] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  410. [ 1.453854] PTP clock support registered
  411. [ 1.454863] Advanced Linux Sound Architecture Driver Initialized.
  412. [ 1.455388] Bluetooth: Core ver 2.21
  413. [ 1.455427] NET: Registered protocol family 31
  414. [ 1.455446] Bluetooth: HCI device and connection manager initialized
  415. [ 1.455471] Bluetooth: HCI socket layer initialized
  416. [ 1.455493] Bluetooth: L2CAP socket layer initialized
  417. [ 1.455529] Bluetooth: SCO socket layer initialized
  418. [ 1.455924] NetLabel: Initializing
  419. [ 1.455944] NetLabel: domain hash size = 128
  420. [ 1.455961] NetLabel: protocols = UNLABELED CIPSOv4
  421. [ 1.456011] NetLabel: unlabeled traffic allowed by default
  422. [ 1.456795] clocksource: Switched to clocksource arch_sys_counter
  423. [ 1.520884] thermal thermal_zone1: power_allocator: sustainable_power will bd
  424. [ 1.521131] NET: Registered protocol family 2
  425. [ 1.521582] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  426. [ 1.521723] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  427. [ 1.522126] TCP: Hash tables configured (established 16384 bind 16384)
  428. [ 1.522219] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  429. [ 1.522312] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  430. [ 1.522595] NET: Registered protocol family 1
  431. [ 1.522926] RPC: Registered named UNIX socket transport module.
  432. [ 1.522956] RPC: Registered udp transport module.
  433. [ 1.522975] RPC: Registered tcp transport module.
  434. [ 1.522994] RPC: Registered tcp NFSv4.1 backchannel transport module.
  435. [ 1.523734] Trying to unpack rootfs image as initramfs...
  436. [ 1.838811] Freeing initrd memory: 6372K
  437. [ 1.839388] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  438. [ 1.839504] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  439. [ 1.840599] kvm [1]: 8-bit VMID
  440. [ 1.840620] kvm [1]: Hyp mode initialized successfully
  441. [ 1.840756] kvm [1]: interrupt-controller@fff20000 IRQ10
  442. [ 1.840995] kvm [1]: timer IRQ12
  443. [ 1.843894] audit: initializing netlink subsys (disabled)
  444. [ 1.843956] audit: type=2000 audit(1.776:1): initialized
  445. [ 1.844686] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  446. [ 1.852128] VFS: Disk quotas dquot_6.6.0
  447. [ 1.852300] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  448. [ 1.853740] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  449. [ 1.854906] NFS: Registering the id_resolver key type
  450. [ 1.854949] Key type id_resolver registered
  451. [ 1.854968] Key type id_legacy registered
  452. [ 1.855000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  453. [ 1.855679] fuse init (API version 7.23)
  454. [ 1.856440] JFS: nTxBlock = 8192, nTxLock = 65536
  455. [ 1.861755] SGI XFS with ACLs, security attributes, realtime, no debug enabld
  456. [ 1.863882] Key type big_key registered
  457. [ 1.863957]
  458. [ 1.863957] TEE Core Framework initialization (ver 1:0.1)
  459. [ 1.864000] TEE armv7 Driver initialization
  460. [ 1.864393] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  461. [ 1.864421] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  462. [ 1.864627] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  463. [ 1.868542] NET: Registered protocol family 38
  464. [ 1.868588] Key type asymmetric registered
  465. [ 1.868613] Asymmetric key parser 'x509' registered
  466. [ 1.868831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  467. [ 1.868999] io scheduler noop registered
  468. [ 1.869025] io scheduler deadline registered (default)
  469. [ 1.869074] io scheduler cfq registered
  470. [ 1.870555] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS suppr
  471. [ 1.876046] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  472. [ 1.876087] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  473. [ 1.877576] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  474. [ 1.877612] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  475. [ 1.878777] pwm-regulator: supplied by vcc_sys
  476. [ 1.879459] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  477. [ 1.881105] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 35, base_baud =A
  478. [ 1.997447] console [ttyS2] enabled
  479. [ 1.998828] [drm] Initialized drm 1.1.0 20060810
  480. [ 2.002879] [drm] Rockchip DRM driver version: v1.0.1
  481. [ 2.003820] usbcore: registered new interface driver udl
  482. [ 2.005607] Unable to detect cache hierarchy for CPU 0
  483. [ 2.006839] brd: module loaded
  484. [ 2.012536] loop: module loaded
  485. [ 2.012902] lkdtm: No crash points registered, enable through debugfs
  486. [ 2.014901] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  487. [ 2.015507] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  488. [ 2.016105] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  489. [ 2.017252] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  490. [ 2.017744] 3 ofpart partitions found on MTD device spi32766.0
  491. [ 2.018273] Creating 3 MTD partitions on "spi32766.0":
  492. [ 2.018744] 0x000000000000-0x0000003f8000 : "loader"
  493. [ 2.020085] 0x0000003f8000-0x000000400000 : "env"
  494. [ 2.021376] 0x0000007c0000-0x000000800000 : "vendor"
  495. [ 2.024047] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  496. [ 2.024758] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  497. [ 2.025418] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  498. [ 2.025935] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  499. [ 2.026466] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  500. [ 2.027200] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  501. [ 2.027828] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  502. [ 2.033386] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  503. [ 2.034014] stmmac - user ID: 0x10, Synopsys ID: 0x35
  504. [ 2.034474] Ring mode enabled
  505. [ 2.034759] DMA HW capability register supported
  506. [ 2.035161] Normal descriptors
  507. [ 2.035481] RX Checksum Offload Engine supported (type 2)
  508. [ 2.035976] Wake-Up On Lan supported
  509. [ 2.036347] Enable RX Mitigation via HW Watchdog Timer
  510. [ 2.115674] libphy: stmmac: probed
  511. [ 2.116006] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  512. [ 2.116589] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  513. [ 2.118430] Rockchip WiFi SYS interface (V1.00) ...
  514. [ 2.118961] usbcore: registered new interface driver cdc_ether
  515. [ 2.119527] usbcore: registered new interface driver rndis_host
  516. [ 2.121362] rockchip-dwc3 usb0: failed to get drvdata dwc3
  517. [ 2.126951] rockchip-dwc3 usb1: fail to get drvdata hcd
  518. [ 2.128522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  519. [ 2.129167] ehci-pci: EHCI PCI platform driver
  520. [ 2.129625] ehci-platform: EHCI generic platform driver
  521. [ 2.133968] ehci-platform fe3c0000.usb: EHCI Host Controller
  522. [ 2.134662] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus1
  523. [ 2.135471] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
  524. [ 2.144822] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  525. [ 2.145538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  526. [ 2.146155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  527. [ 2.146817] usb usb1: Product: EHCI Host Controller
  528. [ 2.147264] usb usb1: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  529. [ 2.148037] usb usb1: SerialNumber: fe3c0000.usb
  530. [ 2.148945] hub 1-0:1.0: USB hub found
  531. [ 2.149317] hub 1-0:1.0: 1 port detected
  532. [ 2.150205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  533. [ 2.150777] ohci-platform: OHCI generic platform driver
  534. [ 2.151745] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  535. [ 2.152527] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus2
  536. [ 2.153341] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
  537. [ 2.212963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  538. [ 2.213580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  539. [ 2.214242] usb usb2: Product: Generic Platform OHCI controller
  540. [ 2.214779] usb usb2: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  541. [ 2.215554] usb usb2: SerialNumber: fe3e0000.usb
  542. [ 2.216568] hub 2-0:1.0: USB hub found
  543. [ 2.216991] hub 2-0:1.0: 1 port detected
  544. [ 2.219683] usbcore: registered new interface driver iforce
  545. [ 2.220246] usbcore: registered new interface driver xpad
  546. [ 2.221214] usbcore: registered new interface driver usbtouchscreen
  547. [ 2.222198] .. rk pwm remotectl v1.1 init
  548. [ 2.222907] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/inpu0
  549. [ 2.224363] i2c /dev entries driver
  550. [ 2.225909] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  551. [ 2.226590] fan53555-reg: supplied by vcc_sys
  552. [ 2.229374] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  553. [ 2.230040] fan53555-reg: supplied by vcc_sys
  554. [ 2.232987] rk808 0-001b: Pmic Chip id: 0x0
  555. [ 2.236616] rk808-regulator rk808-regulator: there is no dvs0 gpio
  556. [ 2.237240] rk808-regulator rk808-regulator: there is no dvs1 gpio
  557. [ 2.237877] DCDC_REG1: supplied by vcc_sys
  558. [ 2.239008] DCDC_REG2: supplied by vcc_sys
  559. [ 2.239968] DCDC_REG3: supplied by vcc_sys
  560. [ 2.240618] DCDC_REG4: supplied by vcc_sys
  561. [ 2.241505] LDO_REG1: supplied by vcc_sys
  562. [ 2.243007] LDO_REG2: supplied by vcc_sys
  563. [ 2.244361] LDO_REG3: supplied by vcc_sys
  564. [ 2.245725] LDO_REG4: supplied by vcc_sys
  565. [ 2.247081] LDO_REG5: supplied by vcc_sys
  566. [ 2.248437] LDO_REG6: supplied by vcc_sys
  567. [ 2.250033] LDO_REG7: supplied by vcc_sys
  568. [ 2.251397] LDO_REG8: supplied by vcc_sys
  569. [ 2.252763] SWITCH_REG1: supplied by vcc3v3_sys
  570. [ 2.253504] SWITCH_REG2: supplied by vcc3v3_sys
  571. [ 2.257485] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  572. [ 2.258519] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  573. [ 2.259821] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  574. [ 2.261627] fusb302 4-0022: Can't get property of role, set role to default P
  575. [ 2.270686] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, trE
  576. [ 2.271512] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  577. [ 2.273257] IR NEC protocol handler initialized
  578. [ 2.273681] IR RC5(x/sz) protocol handler initialized
  579. [ 2.274147] IR RC6 protocol handler initialized
  580. [ 2.274566] IR JVC protocol handler initialized
  581. [ 2.274986] IR Sony protocol handler initialized
  582. [ 2.275414] IR SANYO protocol handler initialized
  583. [ 2.275849] IR Sharp protocol handler initialized
  584. [ 2.276285] IR MCE Keyboard/mouse protocol handler initialized
  585. [ 2.276838] IR XMP protocol handler initialized
  586. [ 2.277878] usbcore: registered new interface driver uvcvideo
  587. [ 2.278399] USB Video Class driver (1.1.1)
  588. [ 2.281702] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, te7
  589. [ 2.282672] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  590. [ 2.284312] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-m
  591. [ 2.285106] Bluetooth: Virtual HCI driver ver 1.5
  592. [ 2.285660] Bluetooth: HCI UART driver ver 2.3
  593. [ 2.286071] Bluetooth: HCI UART protocol H4 registered
  594. [ 2.286538] Bluetooth: HCI UART protocol LL registered
  595. [ 2.287005] Bluetooth: HCI UART protocol ATH3K registered
  596. [ 2.287546] usbcore: registered new interface driver bfusb
  597. [ 2.288094] usbcore: registered new interface driver btusb
  598. [ 2.288992] cpu cpu0: Failed to get leakage
  599. [ 2.289470] cpu cpu0: Failed to get pvtm
  600. [ 2.290081] cpu cpu4: Failed to get leakage
  601. [ 2.290530] cpu cpu4: Failed to get pvtm
  602. [ 2.295082] sdhci: Secure Digital Host Controller Interface driver
  603. [ 2.295645] sdhci: Copyright(c) Pierre Ossman
  604. [ 2.296047] Synopsys Designware Multimedia Card Interface Driver
  605. [ 2.297492] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  606. [ 2.298176] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  607. [ 2.298797] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  608. [ 2.299357] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bio
  609. [ 2.300255] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was.
  610. [ 2.301127] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  611. [ 2.301944] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  612. [ 2.302631] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  613. [ 2.316861] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  614. [ 2.334030] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  615. [ 2.334849] sdhci-pltfm: SDHCI platform and OF driver helper
  616. [ 2.337022] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  617. [ 2.337568] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  618. [ 2.372833] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  619. [ 2.377022] hidraw: raw HID events driver (C) Jiri Kosina
  620. [ 2.381553] usbcore: registered new interface driver usbhid
  621. [ 2.382091] usbhid: USB HID core driver
  622. [ 2.388975] usbcore: registered new interface driver snd-usb-audio
  623. [ 2.390843] es8316 1-0010: Can not read property spk_ctl_gpio
  624. [ 2.402394] u32 classifier
  625. [ 2.402672] Netfilter messages via NETLINK v0.30.
  626. [ 2.403148] ip_set: protocol 6
  627. [ 2.403645] Initializing XFRM netlink socket
  628. [ 2.404604] NET: Registered protocol family 10
  629. [ 2.406364] NET: Registered protocol family 17
  630. [ 2.406802] NET: Registered protocol family 15
  631. [ 2.407240] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
  632. [ 2.408393] Bridge firewalling registered
  633. [ 2.409295] Bluetooth: RFCOMM socket layer initialized
  634. [ 2.409791] Bluetooth: RFCOMM ver 1.11
  635. [ 2.410161] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  636. [ 2.410703] Bluetooth: HIDP socket layer initialized
  637. [ 2.411213] 8021q: 802.1Q VLAN Support v1.8
  638. [ 2.411625] [WLAN_RFKILL]: Enter rfkill_wlan_init
  639. [ 2.412322] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  640. [ 2.412839] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  641. [ 2.413462] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  642. [ 2.414105] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by g.
  643. [ 2.414840] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_w.
  644. [ 2.415664] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not foun!
  645. [ 2.416331] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  646. [ 2.416820] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  647. [ 2.417309] [BT_RFKILL]: Enter rfkill_rk_init
  648. [ 2.418036] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts.
  649. [ 2.418807] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset.
  650. [ 2.419549] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  651. [ 2.420291] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  652. [ 2.422033] [BT_RFKILL]: Request irq for bt wakeup host
  653. [ 2.422572] [BT_RFKILL]: ** disable irq
  654. [ 2.423071] [BT_RFKILL]: bt_default device registered.
  655. [ 2.423636] Key type dns_resolver registered
  656. [ 2.426300] Registered cp15_barrier emulation handler
  657. [ 2.427404] Registered setend emulation handler
  658. [ 2.428377] registered taskstats version 1
  659. [ 2.431511] Btrfs loaded, integrity-checker=on
  660. [ 2.431987] BTRFS: selftest: Running btrfs free space cache tests
  661. [ 2.432558] BTRFS: selftest: Running extent only tests
  662. [ 2.433081] BTRFS: selftest: Running bitmap only tests
  663. [ 2.433562] BTRFS: selftest: Running bitmap and extent tests
  664. [ 2.434096] BTRFS: selftest: Running space stealing from bitmap to extent
  665. [ 2.435420] BTRFS: selftest: Free space cache tests finished
  666. [ 2.435931] BTRFS: selftest: Running extent buffer operation tests
  667. [ 2.436462] BTRFS: selftest: Running btrfs_split_item tests
  668. [ 2.437046] BTRFS: selftest: Running find delalloc tests
  669. [ 2.597549] BTRFS: selftest: Running btrfs_get_extent tests
  670. [ 2.598168] BTRFS: selftest: Running hole first btrfs_get_extent test
  671. [ 2.598752] BTRFS: selftest: Running outstanding_extents tests
  672. [ 2.599299] BTRFS: selftest: Running qgroup tests
  673. [ 2.599718] BTRFS: selftest: Qgroup basic add
  674. [ 2.600146] BTRFS: selftest: Qgroup multiple refs test
  675. [ 2.627200] Key type encrypted registered
  676. [ 2.628521] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS suppr
  677. [ 2.630492] rockchip-drm display-subsystem: devfreq is not set
  678. [ 2.631183] rockchip-vop ff900000.vop: missing rockchip,grf property
  679. [ 2.631884] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff)
  680. [ 2.632616] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  681. [ 2.633306] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff)
  682. [ 2.634315] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  683. [ 2.634915] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bur
  684. [ 2.635669] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
  685. [ 2.639788] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xfffff)
  686. [ 2.642109] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  687. [ 2.643549] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8)
  688. [ 2.644548] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  689. [ 2.645496] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  690. [ 2.646139] [drm] No driver support for vblank timestamp query.
  691. [ 2.647123] rockchip-drm display-subsystem: failed to parse loader memory
  692. [ 2.804978] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1
  693. [ 2.918332] Console: switching to colour frame buffer device 240x67
  694. [ 2.973812] rockchip-drm display-subsystem: fb0: frame buffer device
  695. [ 2.992133] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  696. [ 2.993254] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus n3
  697. [ 2.994345] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110
  698. [ 2.995417] xhci-hcd xhci-hcd.5.auto: irq 223, io mem 0xfe800000
  699. [ 2.996367] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  700. [ 2.997217] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  701. [ 2.998045] usb usb3: Product: xHCI Host Controller
  702. [ 2.998611] usb usb3: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  703. [ 2.999578] usb usb3: SerialNumber: xhci-hcd.5.auto
  704. [ 3.001113] hub 3-0:1.0: USB hub found
  705. [ 3.001612] hub 3-0:1.0: 1 port detected
  706. [ 3.002622] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  707. [ 3.003510] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus n4
  708. [ 3.004507] usb usb4: We don't know the algorithms for LPM for this host, di.
  709. [ 3.005650] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  710. [ 3.006436] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  711. [ 3.007261] usb usb4: Product: xHCI Host Controller
  712. [ 3.007825] usb usb4: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  713. [ 3.008817] usb usb4: SerialNumber: xhci-hcd.5.auto
  714. [ 3.010240] hub 4-0:1.0: USB hub found
  715. [ 3.010730] hub 4-0:1.0: 1 port detected
  716. [ 3.013450] xhci-hcd xhci-hcd.5.auto: remove, state 1
  717. [ 3.014065] usb usb4: USB disconnect, device number 1
  718. [ 3.042364] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microsecon.
  719. [ 3.043205] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting r.
  720. [ 3.044170] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered
  721. [ 3.045115] xhci-hcd xhci-hcd.5.auto: remove, state 1
  722. [ 3.045722] usb usb3: USB disconnect, device number 1
  723. [ 3.047112] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
  724. [ 3.053373] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  725. [ 3.054875] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus n3
  726. [ 3.056262] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110
  727. [ 3.057658] xhci-hcd xhci-hcd.6.auto: irq 224, io mem 0xfe900000
  728. [ 3.058896] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  729. [ 3.059901] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  730. [ 3.060984] usb usb3: Product: xHCI Host Controller
  731. [ 3.061708] usb usb3: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  732. [ 3.062947] usb usb3: SerialNumber: xhci-hcd.6.auto
  733. [ 3.065004] hub 3-0:1.0: USB hub found
  734. [ 3.065633] hub 3-0:1.0: 1 port detected
  735. [ 3.086316] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  736. [ 3.106953] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus n4
  737. [ 3.121104] usb usb4: We don't know the algorithms for LPM for this host, di.
  738. [ 3.129868] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  739. [ 3.138341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  740. [ 3.146806] usb usb4: Product: xHCI Host Controller
  741. [ 3.155003] usb usb4: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  742. [ 3.163631] usb usb4: SerialNumber: xhci-hcd.6.auto
  743. [ 3.172705] hub 4-0:1.0: USB hub found
  744. [ 3.179553] hub 4-0:1.0: 1 port detected
  745. [ 3.190809] ehci-platform fe380000.usb: EHCI Host Controller
  746. [ 3.198270] ehci-platform fe380000.usb: new USB bus registered, assigned bus5
  747. [ 3.205512] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
  748. [ 3.221031] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  749. [ 3.228140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  750. [ 3.234979] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  751. [ 3.241848] usb usb5: Product: EHCI Host Controller
  752. [ 3.248441] usb usb5: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  753. [ 3.255412] usb usb5: SerialNumber: fe380000.usb
  754. [ 3.262806] hub 5-0:1.0: USB hub found
  755. [ 3.268538] hub 5-0:1.0: 1 port detected
  756. [ 3.278392] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  757. [ 3.287711] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus6
  758. [ 3.296712] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
  759. [ 3.365573] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  760. [ 3.383790] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  761. [ 3.396992] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  762. [ 3.420154] usb usb6: Product: Generic Platform OHCI controller
  763. [ 3.438220] usb usb6: Manufacturer: Linux 4.4.154-1124-rockchip-ayufan-ged3cd
  764. [ 3.456675] usb usb6: SerialNumber: fe3a0000.usb
  765. [ 3.476189] hub 6-0:1.0: USB hub found
  766. [ 3.483678] hub 6-0:1.0: 1 port detected
  767. [ 3.553422] usb 3-1: New USB device found, idVendor=2109, idProduct=0715
  768. [ 3.571587] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  769. [ 3.589582] usb 3-1: Product: VLI Product String
  770. [ 3.596169] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mappk
  771. [ 3.596191] asoc-simple-card es8316-sound: ASoC: no source widget found for 1
  772. [ 3.596197] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIASk
  773. [ 3.596204] asoc-simple-card es8316-sound: ASoC: no sink widget found for INP
  774. [ 3.596209] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic JacP
  775. [ 3.596708] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  776. [ 3.596715] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  777. [ 3.596783] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  778. [ 3.596857] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  779. [ 3.596924] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  780. [ 3.596979] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  781. [ 3.601809] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  782. [ 3.601815] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  783. [ 3.601820] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.sp2
  784. [ 3.601825] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -2
  785. [ 3.602012] asoc-simple-card: probe of spdif-sound failed with error -22
  786. [ 3.605494] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 12:01:54)
  787. [ 3.605512] of_cfs_init
  788. [ 3.605564] of_cfs_init: OK
  789. [ 3.626892] vcc3v3_pcie: disabling
  790. [ 3.627539] rk-keypad rockchip-key: no io-channels defined
  791. [ 3.627824] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  792. [ 3.630110] ALSA device list:
  793. [ 3.630112] #0: rockchip,es8316-codec
  794. [ 3.648953] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  795. [ 3.742607] usb 3-1: Manufacturer: VLI Manufacture String
  796. [ 3.742611] usb 3-1: SerialNumber: 000000123ADA
  797. [ 3.753676] ttyS2 - failed to request DMA, use interrupt mode
  798. [ 3.759588] Freeing unused kernel memory: 1216K
  799. Loading, please wait...
  800. starting version 237
  801. [ 4.047445] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already pt
  802. [ 4.053098] mali ff9a0000.gpu: Failed to get leakage
  803. [ 4.053127] mali ff9a0000.gpu: Failed to get pvtm
  804. [ 4.054045] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  805. [ 4.054219] mali ff9a0000.gpu: Protected mode not available
  806. [ 4.054619] mali ff9a0000.gpu: Using configured power model mali-simple-powel
  807. [ 4.054778] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devf.
  808. [ 4.055159] mali ff9a0000.gpu: Probed as mali0
  809. [ 4.072611] usbcore: registered new interface driver usb-storage
  810. [ 4.075807] scsi host0: uas
  811. [ 4.076393] usbcore: registered new interface driver uas
  812. [ 4.097491] scsi 0:0:0:0: Direct-Access SanDisk SDSSDA240G Z320 P6
  813. [ 4.101424] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224)
  814. [ 4.102606] sd 0:0:0:0: [sda] Write Protect is off
  815. [ 4.103041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
  816. [ 4.110354] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
  817. [ 4.115401] sd 0:0:0:0: [sda] Attached SCSI disk
  818. [ 4.264068] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add EL6
  819. [ 4.278794] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mappk
  820. [ 4.287326] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to createe
  821. [ 4.301647] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  822. [ 4.310976] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  823. [ 4.318404] rockchip-pcie f8000000.pcie: invalid power supply
  824. Begin: Loading essential drivers ... done.
  825. Begin: Running /scripts/init-premount ... done.
  826. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  827. Begin: Running /scripts/local-premount ... done.
  828. Warning: fsck not present, so skipping root file system
  829. [ 4.825387] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  830. [ 4.835607] rockchip-pcie: probe of f8000000.pcie failed with error -110
  831. [ 4.926195] EXT4-fs (sda7): recovery complete
  832. [ 4.932429] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opt)
  833. done.
  834. Begin: Running /scripts/local-bottom ... done.
  835. Begin: Running /scripts/init-bottom ... done.
  836. [ 4.983421] random: nonblocking pool is initialized
  837. [ 5.382094] systemd[1]: System time before build time, advancing clock.
  838. [ 5.468183] ip_tables: (C) 2000-2006 Netfilter Core Team
  839. [ 5.490667] cgroup: cgroup2: unknown option "nsdelegate"
  840. [ 5.513845] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SE)
  841. [ 5.536496] systemd[1]: Detected architecture arm64.
  842.  
  843. Welcome to Ubuntu 18.04.1 LTS!
  844.  
  845. [ 5.557981] systemd[1]: Set hostname to <rockpro64>.
  846. [ 5.703617] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Din
  847. [ 5.775564] systemd[1]: File /lib/systemd/system/systemd-journald.service:36.
  848. [ 5.785919] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warn)
  849. [ 6.013746] systemd[1]: Started Dispatch Password Requests to Console Direct.
  850. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  851. [ 6.037276] systemd[1]: Started Forward Password Requests to Wall Directory .
  852. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  853. [ 6.057839] systemd[1]: Created slice User and Session Slice.
  854. [ OK ] Created slice User and Session Slice.
  855. [ 6.077078] systemd[1]: Reached target System Time Synchronized.
  856. [ OK ] Reached target System Time Synchronized.
  857. [ 6.098072] systemd[1]: Created slice System Slice.
  858. [ OK ] Created slice System Slice.
  859. [ 6.121502] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  860. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  861. [ 6.146321] systemd[1]: Created slice system-serial\x2dgetty.slice.
  862. [ OK ] Created slice system-serial\x2dgetty.slice.
  863. [ 6.170206] systemd[1]: Listening on Journal Audit Socket.
  864. [ OK ] Listening on Journal Audit Socket.
  865. [ 6.193917] systemd[1]: Listening on Syslog Socket.
  866. [ OK ] Listening on Syslog Socket.
  867. [ 6.217738] systemd[1]: Listening on udev Kernel Socket.
  868. [ OK ] Listening on udev Kernel Socket.
  869. [ 6.241381] systemd[1]: Reached target Local Encrypted Volumes.
  870. [ OK ] Reached target Local Encrypted Volumes.
  871. [ 6.265850] systemd[1]: Listening on Journal Socket (/dev/log).
  872. [ OK ] Listening on Journal Socket (/dev/log).
  873. [ 6.290035] systemd[1]: Listening on Journal Socket.
  874. [ OK ] Listening on Journal Socket.
  875. [ 6.317529] systemd[1]: Starting Set the console keyboard layout...
  876. Starting Set the console keyboard layout...
  877. [ 6.346127] systemd[1]: Starting Create list of required static device nodes.
  878. Starting Create list of required st��…ce nodes for the current kernel..
  879. [ 6.373737] systemd[1]: Starting Nameserver information manager...
  880. Starting Nameserver information manager...
  881. [ 6.401918] systemd[1]: Starting Journal Service...
  882. Starting Journal Service...
  883. [ 6.429613] systemd[1]: Mounting Huge Pages File System...
  884. Mounting Huge Pages File System...
  885. [ 6.457320] systemd[1]: Starting Remount Root and Kernel File Systems...
  886. Starting Remount Root and Kernel File Systems...
  887. [ 6.478569] systemd[1]: Mounting POSIX Message Queue File System...
  888. Mounting POSIX Message Queue File System...
  889. [ 6.501516] systemd[1]: Listening on udev Control Socket.
  890. [ OK ] Listening on udev Control Socket.
  891. [ 6.523765] systemd[1]: Starting udev Coldplug all Devices...
  892. Starting udev Coldplug all Devices...
  893. [ 6.541677] systemd[1]: Set up automount Arbitrary Executable File Formats F.
  894. [ OK ] Set up automount Arbitrary Executab��…rmats File System Automount Poin.
  895. [ 6.563003] systemd[1]: Starting Load Kernel Modules...
  896. Starting Load Kernel Modules...
  897. [ 6.579899] systemd[1]: Mounting Kernel Debug File System...
  898. Mounting Kernel Debug File System...
  899. [ 6.593293] systemd[1]: Reached target Slices.
  900. [ OK ] Reached target Slices.
  901. [ 6.605170] systemd[1]: Reached target Swap.
  902. [ OK ] Reached target Swap.
  903. [ 6.617107] systemd[1]: Started ntp-systemd-netif.path.
  904. [ OK ] Started ntp-systemd-netif.path.
  905. [ 6.625136] systemd[1]: Reached target Remote File Systems.
  906. [ OK ] Reached target Remote File Systems.
  907. [ 6.640229] systemd[1]: Starting Restore / save the current clock...
  908. Starting Restore / save the current clock...
  909. [ 6.654555] systemd[1]: Started Set the console keyboard layout.
  910. [ OK ] Started Set the console keyboard layout.
  911. [ 6.666011] systemd[1]: Started Journal Service.
  912. [ OK ] Started Journal Service.
  913. [ OK ] Started Create list of required sta��…vice nodes for the current kerne.
  914. [ OK ] Mounted Huge Pages File System.
  915. [ OK ] Started Remount Root and Kernel File Systems.
  916. [ OK ] Mounted POSIX Message Queue File System.
  917. [ OK ] Started Load Kernel Modules.
  918. [ OK ] Mounted Kernel Debug File System.
  919. [ OK ] Started Restore / save the current clock.
  920. [ OK ] Started Nameserver information manager.
  921. [ OK ] Reached target Network (Pre).
  922. Mounting Kernel Configuration File System...
  923. Mounting FUSE Control File System...
  924. Starting Apply Kernel Variables...
  925. Starting Load/Save Random Seed...
  926. Starting Create Static Device Nodes in /dev...
  927. Starting Flush Journal to Persistent Storage...
  928. [ OK ] Mounted Kernel Configuration File System.
  929. [ OK ] Mounted FUSE Control File System.
  930. [ OK ] Started Apply Kernel Variables.
  931. [ OK ] Started Load/Save Random Seed.
  932. [ OK ] Started Create Static Device Nodes in /dev.
  933. [ OK ] Reached target Local File Systems (Pre).
  934. Starting udev Kernel Device Manager...
  935. [ OK ] Started udev Coldplug all Devices.
  936. [ OK ] Started Flush Journal to Persistent Storage.
  937. [ OK ] Started udev Kernel Device Manager.
  938. Starting Network Service...
  939. [ OK ] Reached target Sound Card.
  940. [ OK ] Started Network Service.
  941. [ OK ] Found device /dev/ttyS2.
  942. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  943. Starting Load/Save RF Kill Switch Status...
  944. [ OK ] Started Load/Save RF Kill Switch Status.
  945. [ OK ] Found device SDSSDA240G boot.
  946. Mounting /boot/efi...
  947. [ OK ] Mounted /boot/efi.
  948. [ OK ] Reached target Local File Systems.
  949. Starting Set console font and keymap...
  950. Starting Create Volatile Files and Directories...
  951. Starting Raise network interfaces...
  952. [ OK ] Started Set console font and keymap.
  953. [ OK ] Started Create Volatile Files and Directories.
  954. Starting Update UTMP about System Boot/Shutdown...
  955. Starting Network Time Synchronization...
  956. Starting Network Name Resolution...
  957. [ OK ] Started Update UTMP about System Boot/Shutdown.
  958. [ OK ] Started Raise network interfaces.
  959. [ OK ] Started Network Time Synchronization.
  960. [ OK ] Started Network Name Resolution.
  961. [ OK ] Reached target Host and Network Name Lookups.
  962. [ OK ] Reached target System Initialization.
  963. [ OK ] Started resolvconf-pull-resolved.path.
  964. [ OK ] Reached target Paths.
  965. [ OK ] Started Discard unused blocks once a week.
  966. [ OK ] Listening on D-Bus System Message Bus Socket.
  967. [ OK ] Reached target Sockets.
  968. [ OK ] Reached target Basic System.
  969. Starting Generate SSH keys if not there...
  970. Starting Resets System Activity Data Collector...
  971. Starting resolvconf-pull-resolved.service...
  972. Starting Rock 64 First boot...
  973. Starting Dispatcher daemon for systemd-networkd...
  974. Starting System Logging Service...
  975. [ OK ] Started Set the CPU Frequency Scaling governor.
  976. [ OK ] Started Regular background program processing daemon.
  977. Starting Login Service...
  978. [ OK ] Started Message of the Day.
  979. [ OK ] Started D-Bus System Message Bus.
  980. Starting Network Manager...
  981. Starting WPA supplicant...
  982. Starting Initializes zram swaping...
  983. Starting Save/Restore Sound Card State...
  984. [ OK ] Started Daily apt download activities.
  985. [ OK ] Started Daily apt upgrade and clean activities.
  986. [ OK ] Started ntp-systemd-netif.service.
  987. [ OK ] Started Daily Cleanup of Temporary Directories.
  988. [ OK ] Reached target Timers.
  989. [ OK ] Started System Logging Service.
  990. [ OK ] Started Generate SSH keys if not there.
  991. [ OK ] Started Resets System Activity Data Collector.
  992. [ OK ] Started resolvconf-pull-resolved.service.
  993. [ OK ] Started Rock 64 First boot.
  994. [ OK ] Started Save/Restore Sound Card State.
  995. [ OK ] Started Login Service.
  996. [ OK ] Started WPA supplicant.
  997. [ OK ] Started Initializes zram swaping.
  998. Starting resolvconf-pull-resolved.service...
  999. Starting Hostname Service...
  1000. [ OK ] Started resolvconf-pull-resolved.service.
  1001. [ OK ] Started Hostname Service.
  1002. [ OK ] Started Network Manager.
  1003. Starting Network Manager Script Dispatcher Service...
  1004. [ OK ] Reached target Network.
  1005. Starting OpenBSD Secure Shell server...
  1006. Starting Permit User Sessions...
  1007. [ OK ] Started Permit User Sessions.
  1008. [ OK ] Started Serial Getty on ttyS2.
  1009. Starting Set console scheme...
  1010. [ OK ] Started Network Manager Script Dispatcher Service.
  1011. [ OK ] Started Set console scheme.
  1012. [ OK ] Created slice system-getty.slice.
  1013. [ OK ] Started Getty on tty1.
  1014. [ OK ] Reached target Login Prompts.
  1015. [ OK ] Started Dispatcher daemon for systemd-networkd.
  1016. [ OK ] Started OpenBSD Secure Shell server.
  1017. [ OK ] Reached target Multi-User System.
  1018. [ OK ] Reached target Graphical Interface.
  1019. Starting Update UTMP about System Runlevel Changes...
  1020. Starting Authorization Manager...
  1021. [ OK ] Started Update UTMP about System Runlevel Changes.
  1022. [ OK ] Started Authorization Manager.
  1023.  
  1024. Ubuntu 18.04.1 LTS rockpro64 ttyS2
  1025.  
  1026. rockpro64 login:
RAW Paste Data