Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- damian@gondor ~> dmesg -H | tail -100
- [ +0,000002] Restarting tasks ...
- [ +0,000326] acpi PNP0501:00: Still not present
- [ +0,010805] done.
- [ +0,144190] video LNXVIDEO:01: Restoring backlight state
- [ +0,010679] PM: suspend exit
- [ +0,252131] e1000e 0000:00:19.0 enp0s25: NIC Link is Down
- [ +0,225714] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
- [ +0,304176] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
- [ +0,413740] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
- [ +2,725590] wlo1: authenticate with d0:16:b4:e6:2e:02
- [ +0,001217] wlo1: send auth to d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,001785] wlo1: authenticated
- [ +0,000951] wlo1: associate with d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,005583] wlo1: RX AssocResp from d0:16:b4:e6:2e:02 (capab=0x411 status=0 aid=2)
- [ +0,002379] wlo1: associated
- [ +0,616983] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
- [ +6,306878] wlo1: deauthenticating from d0:16:b4:e6:2e:02 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ +11,395022] wlo1: authenticate with d0:16:b4:e6:2e:02
- [ +0,003553] wlo1: send auth to d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,002935] wlo1: authenticated
- [ +0,001827] wlo1: associate with d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,004075] wlo1: RX AssocResp from d0:16:b4:e6:2e:02 (capab=0x411 status=0 aid=2)
- [ +0,003311] wlo1: associated
- [ +0,613929] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
- [ +12,841340] wlo1: deauthenticating from d0:16:b4:e6:2e:02 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ +0,395237] PM: suspend entry (deep)
- [ +0,047736] Filesystems sync: 0.047 seconds
- [ +0,007551] Freezing user space processes ... (elapsed 0.004 seconds) done.
- [ +0,004868] OOM killer disabled.
- [ +0,000004] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ +0,004292] printk: Suspending console(s) (use no_console_suspend to debug)
- [ +0,053217] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ +0,004717] sd 0:0:0:0: [sda] Stopping disk
- [ +0,036049] parport_pc 00:04: disabled
- [ +0,000283] e1000e: EEE TX LPI TIMER: 00000011
- [ +0,307237] ACPI: EC: interrupt blocked
- [ +0,021502] ACPI: Preparing to enter system sleep state S3
- [ +0,001122] ACPI: EC: event blocked
- [ +0,000001] ACPI: EC: EC stopped
- [ +0,000000] PM: Saving platform NVS memory
- [ +0,012736] Disabling non-boot CPUs ...
- [ +0,001605] smpboot: CPU 1 is now offline
- [ +0,002340] IRQ 38: no longer affine to CPU2
- [ +0,001233] smpboot: CPU 2 is now offline
- [ +0,001992] IRQ 16: no longer affine to CPU3
- [ +0,000009] IRQ 26: no longer affine to CPU3
- [ +0,000006] IRQ 27: no longer affine to CPU3
- [ +0,000007] IRQ 31: no longer affine to CPU3
- [ +0,000004] IRQ 32: no longer affine to CPU3
- [ +0,000007] IRQ 35: no longer affine to CPU3
- [ +0,000009] IRQ 40: no longer affine to CPU3
- [ +0,001020] smpboot: CPU 3 is now offline
- [ +0,002542] ACPI: Low-level resume complete
- [ +0,000051] ACPI: EC: EC started
- [ +0,000000] PM: Restoring platform NVS memory
- [ +0,005460] Enabling non-boot CPUs ...
- [ +0,000050] x86: Booting SMP configuration:
- [ +0,000001] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ +0,003294] CPU1 is up
- [ +0,000067] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ +0,003684] CPU2 is up
- [ +0,000076] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ +0,003503] CPU3 is up
- [ +0,006371] ACPI: Waking up from system sleep state S3
- [ +0,022899] ACPI: EC: interrupt unblocked
- [ +0,058205] ACPI: EC: event unblocked
- [ +0,010797] sd 0:0:0:0: [sda] Starting disk
- [ +0,034680] parport_pc 00:04: activated
- [ +0,241796] usb 2-1.8: reset full-speed USB device number 4 using ehci-pci
- [ +0,083433] ata6: SATA link down (SStatus 0 SControl 300)
- [ +0,000054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ +0,000024] ata4: SATA link down (SStatus 0 SControl 300)
- [ +0,000022] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ +0,000015] ata5: SATA link down (SStatus 0 SControl 300)
- [ +0,001385] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ +0,000864] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ +0,000880] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ +0,000285] ata1.00: configured for UDMA/133
- [ +0,001491] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ +0,000003] ata2.00: configured for UDMA/100
- [ +0,099516] usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
- [ +0,116004] firewire_core 0000:23:00.0: rediscovered device fw0
- [ +0,230741] acpi LNXPOWER:01: Turning OFF
- [ +0,000101] OOM killer enabled.
- [ +0,000001] Restarting tasks ...
- [ +0,000388] acpi PNP0501:00: Still not present
- [ +0,016135] done.
- [ +0,153207] video LNXVIDEO:01: Restoring backlight state
- [ +0,011068] PM: suspend exit
- [ +0,182844] e1000e 0000:00:19.0 enp0s25: NIC Link is Down
- [ +0,233793] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
- [ +0,291930] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
- [ +0,260919] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
- [ +3,040324] wlo1: authenticate with d0:16:b4:e6:2e:02
- [ +0,001271] wlo1: send auth to d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,002742] wlo1: authenticated
- [ +0,004614] wlo1: associate with d0:16:b4:e6:2e:02 (try 1/3)
- [ +0,009927] wlo1: RX AssocResp from d0:16:b4:e6:2e:02 (capab=0x411 status=0 aid=2)
- [ +0,005322] wlo1: associated
- [ +0,604631] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement