Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- lat_ver=65536
- <6>[ 0.190277] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
- <6>[ 0.190307] msm_rpm_init: RPM firmware 3.0.16842936
- <3>[ 0.211700] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211730] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211730] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211761] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211761] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211761] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211791] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.211791] msm_rpm_get_status(): Status id 433 not defined for target
- <6>[ 0.229949] ASUSTek: Bypassing PCB_ID3
- <6>[ 0.229980] ASUSTek: PCBID=143
- <6>[ 0.231079] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
- <6>[ 0.231292] pm8921_probe: PMIC revision 1: F4
- <6>[ 0.231292] pm8921_probe: PMIC revision 2: 06
- <6>[ 0.231323] pm8921_probe: PMIC version: PM8921 rev 3.0
- <6>[ 0.231323] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
- <6>[ 0.232543] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- <6>[ 0.233062] pm_gpio_probe: OK: base=152, ngpio=44
- <6>[ 0.233337] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- <6>[ 0.233428] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- <6>[ 0.235198] pm8821_probe: PMIC revision 1: PM8821 rev F3
- <6>[ 0.235229] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- <6>[ 0.235229] pm8821_probe: PMIC version: PM8821 ver 2.1
- <6>[ 0.235870] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- <6>[ 0.235900] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- <3>[ 0.236206] gpio_vreg_probe: gpio_label required.
- <4>[ 0.236236] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
- <6>[ 0.237457] saw_probe: id=0, name=8921_s5
- <6>[ 0.237792] saw_probe: id=1, name=8921_s6
- <6>[ 0.238159] saw_probe: id=2, name=8821_s0
- <6>[ 0.238525] saw_probe: id=3, name=8821_s1
- <3>[ 0.246582] Sensors:DSPS: initial dsps.
- <4>[ 0.247680] [ELAN] Touch dirver register
- <6>[ 0.248107] persistent_ram: uncorrectable error in header
- <6>[ 0.248138] persistent_ram: no valid data in buffer (sig = 0xfff7ffff)
- <6>[ 0.261260] console [ram0] enabled
- <4>[ 0.261871] apq8064_init_fb: lcd_type=0
- <6>[ 0.262054] apq8064_init_fb: register mipi_JDI_panel_device
- <3>[ 0.263458] msm_gpiomux_install: write failure: -22
- <3>[ 0.263549] msm_gpiomux_install: write failure: -22
- <3>[ 0.263732] msm_gpiomux_install: write failure: -22
- <3>[ 0.263824] msm_gpiomux_install: write failure: -22
- <3>[ 0.263916] msm_gpiomux_install: write failure: -22
- <3>[ 0.264099] msm_gpiomux_install: write failure: -22
- <6>[ 0.265045] Registering gpio keys
- <6>[ 0.265228] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC
- <4>[ 0.265441] 8921_l17: Failed to create debugfs directory
- <4>[ 0.267333] ------------[ cut here ]------------
- <4>[ 0.267456] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/arch/arm/mach-msm/subsystem_restart.c:617 subsys_restart_init+0xd8/0x10c()
- <4>[ 0.267669] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 0.267852] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070dd8>] (warn_slowpath_null+0x18/0x20)
- <4>[ 0.268035] [<c0070dd8>] (warn_slowpath_null+0x18/0x20) from [<c0e0bd78>] (subsys_restart_init+0xd8/0x10c)
- <4>[ 0.268249] [<c0e0bd78>] (subsys_restart_init+0xd8/0x10c) from [<c0e0099c>] (do_one_initcall+0x8c/0x150)
- <4>[ 0.268432] [<c0e0099c>] (do_one_initcall+0x8c/0x150) from [<c0e00b64>] (kernel_init+0x104/0x1c0)
- <4>[ 0.268554] [<c0e00b64>] (kernel_init+0x104/0x1c0) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.268768] ---[ end trace da227214a82491b7 ]---
- <6>[ 0.271453] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- <6>[ 0.271545] sps:BAM 0x12244000 is registered.
- <6>[ 0.272216] sps:sps is ready.
- <6>[ 0.303588] bio: create slab <bio-0> at 0
- <6>[ 0.304443] vgaarb: loaded
- <6>[ 0.304748] ION heap vmalloc created
- <6>[ 0.304931] ION heap mm created at a0000000 with size 5c00000
- <6>[ 0.305053] ION heap mm_fw created at 9fe00000 with size 1e0000
- <6>[ 0.305267] ION heap mfc created at a5c00000 with size 2000
- <6>[ 0.305389] ION heap iommu created
- <6>[ 0.305511] ION heap qsecom created at fea07000 with size 780000
- <6>[ 0.305664] ION heap audio created at ff187000 with size 4cf000
- <5>[ 0.307006] pm8xxx_pwm_probe: OK
- <5>[ 0.307800] SCSI subsystem initialized
- <6>[ 0.308227] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
- <6>[ 0.308410] sps:BAM 0x28084000 is registered.
- <6>[ 0.312286] usbcore: registered new interface driver usbfs
- <6>[ 0.312622] usbcore: registered new interface driver hub
- <6>[ 0.312835] usbcore: registered new device driver usb
- <6>[ 0.313476] Linux media interface: v0.10
- <6>[ 0.313629] Linux video capture interface: v2.00
- <7>[ 0.314056] Registered led device: white
- <6>[ 0.314819] apq8064_pm8921_pwm_init+
- <6>[ 0.315063] apq8064_pm8921_pwm_init-
- <6>[ 0.315887] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
- <6>[ 0.316101] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
- <6>[ 0.316406] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
- <6>[ 0.316711] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
- <6>[ 0.316925] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
- <6>[ 0.317230] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
- <6>[ 0.317504] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
- <6>[ 0.317718] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
- <6>[ 0.318023] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
- <6>[ 0.318237] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
- <6>[ 0.318542] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
- <6>[ 0.318878] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
- <6>[ 0.319366] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- <6>[ 0.319671] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- <6>[ 0.320007] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- <6>[ 0.320281] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- <6>[ 0.320617] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- <6>[ 0.320861] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- <6>[ 0.321197] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- <6>[ 0.321563] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- <6>[ 0.321807] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- <6>[ 0.322113] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- <6>[ 0.322357] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- <6>[ 0.322692] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- <6>[ 0.322998] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- <6>[ 0.323272] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- <6>[ 0.323638] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- <6>[ 0.324066] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- <6>[ 0.324371] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- <6>[ 0.324707] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- <6>[ 0.324920] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- <6>[ 0.325317] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- <6>[ 0.325714] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- <6>[ 0.325958] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- <6>[ 0.326293] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- <6>[ 0.326477] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.327270] Bluetooth: Core ver 2.16
- <6>[ 0.327423] NET: Registered protocol family 31
- <6>[ 0.327606] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.327697] Bluetooth: HCI socket layer initialized
- <6>[ 0.327880] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.328247] Bluetooth: SCO socket layer initialized
- <6>[ 0.328765] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.328887] cfg80211: World regulatory domain updated:
- <6>[ 0.329071] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 0.329162] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.329345] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.329528] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.329620] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.329803] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.331085] Switching to clocksource gp_timer
- <6>[ 0.368011] NET: Registered protocol family 2
- <6>[ 0.377624] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.378295] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.379638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.380401] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.380554] TCP: reno registered
- <6>[ 0.380676] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.380859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.381408] NET: Registered protocol family 1
- <6>[ 0.382110] RPC: Registered named UNIX socket transport module.
- <6>[ 0.382202] RPC: Registered udp transport module.
- <6>[ 0.382385] RPC: Registered tcp transport module.
- <6>[ 0.382476] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <7>[ 0.382659] PCI: CLS 0 bytes, default 64
- <6>[ 0.382995] Trying to unpack rootfs image as initramfs...
- <6>[ 0.832550] Freeing initrd memory: 6084K
- <6>[ 0.835052] Detected 9 counters on the L2CC PMU.
- <6>[ 0.836700] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- <6>[ 0.838134] pil_riva pil_riva: using secure boot
- <6>[ 0.840545] pil_dsps pil_dsps: using secure boot
- <6>[ 0.841766] pil_gss pil_gss: using secure boot
- <3>[ 0.849548] smd_channel_probe_worker: allocation table not initialized
- <6>[ 0.852813] msm_dsps driver version 4.03.
- <6>[ 0.855194] NET: Registered protocol family 27
- <1>[ 0.859069] dma_test_init, minor number 97
- <6>[ 0.859527] lpass_fatal_init: lpass SSR driver init'ed.
- <6>[ 0.860015] wcnss_8960: module initialized
- <6>[ 0.860565] gss_8064_init: gss fatal driver init'ed.
- <6>[ 0.861633] acpuclk-8064 acpuclk-8064: SPEED BIN: 14
- <6>[ 0.861785] acpuclk-8064 acpuclk-8064: ACPU PVS: 4
- <6>[ 0.864532] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
- <6>[ 0.864715] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
- <6>[ 0.864898] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
- <6>[ 0.865020] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
- <5>[ 0.867706] msm_rpm_log_probe: OK
- <6>[ 0.871002] usbcore: registered new interface driver hsic_sysmon
- <6>[ 0.872100] audit: initializing netlink socket (disabled)
- <5>[ 0.872344] type=2000 audit(0.850:1): initialized
- <4>[ 0.874206] highmem bounce pool size: 64 pages
- <5>[ 0.881378] VFS: Disk quotas dquot_6.5.2
- <4>[ 0.881927] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <6>[ 0.884979] Registering sdcardfs 0.1
- <5>[ 0.885437] NFS: Registering the id_resolver key type
- <6>[ 0.886962] fuse init (API version 7.18)
- <7>[ 0.888000] SELinux: Registering netfilter hooks
- <6>[ 0.892333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 0.892578] io scheduler noop registered
- <6>[ 0.893005] io scheduler deadline registered
- <6>[ 0.893280] io scheduler cfq registered (default)
- <6>[ 0.893676] io scheduler test-iosched registered
- <6>[ 0.894592] io scheduler bfq registered
- <6>[ 0.894836] BFQ I/O-scheduler: v7r8
- <6>[ 0.899261] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
- <6>[ 0.899749] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00fc000
- <6>[ 0.900451] mipi_JDI_1080P_pt_init+
- <6>[ 0.901000] mipi_JDI_lcd_probe+
- <6>[ 0.901214] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.901672] mipi_JDI_lcd_probe, lcd_pwm_type=1
- <6>[ 0.902465] mipi_JDI_lcd_probe+
- <6>[ 0.902679] mipi_JDI_lcd_probe, hw_revision=0
- <6>[ 0.903106] mipi_JDI_lcd_probe, lcd_pwm_type=1
- <6>[ 0.903320] setting pdata->panel_info.fb_num to 3. type: 9
- <6>[ 0.917999] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!
- <7>[ 0.918609] Registered led device: lcd-backlight
- <6>[ 0.918731] mipi_JDI_lcd_probe-
- <6>[ 0.918945] mipi_JDI_1080P_pt_init-
- <6>[ 0.920379] setting pdata->panel_info.fb_num to 1. type: 7
- <6>[ 0.923797] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- <6>[ 0.924377] mdp4_dtv_vsync_init: ndx=0
- <3>[ 0.924621] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group edda7c08
- <7>[ 0.924835] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
- <6>[ 0.924865] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <6>[ 0.926361]
- <6>[ 0.926361] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 0.926788]
- <6>[ 0.926788] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 0.928558] msm_serial_hs module loaded
- <6>[ 0.928985] msm_serial_hsl: detected port #1
- <6>[ 0.929260] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
- <6>[ 0.929656] msm_serial_hsl: detected port #0
- <6>[ 0.929901] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
- <6>[ 0.930175] msm_serial_hsl: console setup on port #0
- <6>[ 2.509338] console [ttyHSL0] enabled
- <6>[ 2.513214] msm_serial_hsl: driver initialized
- <6>[ 2.518981] msm_rotator_probe: rotator_hw_revision=2
- <6>[ 2.529724] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- <6>[ 2.557220] brd: module loaded
- <6>[ 2.567810] loop: module loaded
- <6>[ 2.572784] anx7808 init gpio
- <6>[ 2.641937] sp_tx_hardware_poweron: anx7808 power on
- <6>[ 2.646789] ANX7808 is found.
- <5>[ 2.650146] 3.3V output disabled
- <6>[ 2.711914] sp_tx_hardware_powerdown: anx7808 power down
- <5>[ 2.716369] SP_TX To System State:
- <5>[ 2.719573] STATE_CABLE_PLUG
- <6>[ 2.722900] tabla-slim tabla-slim: Platform data from board file
- <3>[ 2.892608] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
- <6>[ 2.902679] tabla2x-slim tabla2x-slim: Platform data from board file
- <6>[ 2.979095] wcd9xxx_check_codec_type: codec is tabla_codec
- <6>[ 2.983673] wcd9xxx_check_codec_type: Read codec idbytes & version
- <6>[ 2.983703] byte_0[00000002] byte_1[00000000] byte_2[00000000]
- <6>[ 2.983703] byte_3[00000001] version = 2
- <4>[ 3.001220] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 3.007263] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <6>[ 3.015350] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
- <6>[ 3.022613] bcm2079x-i2c 0-0077: requesting IRQ 320
- <6>[ 3.027130] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
- <6>[ 3.036499] SCSI Media Changer driver v0.25
- <6>[ 3.040832] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
- <6>[ 3.049285] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 3.053588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 3.060058] rmnet_init: BAM devices[8]
- <6>[ 3.088256] PPP generic driver version 2.4.2
- <6>[ 3.091979] PPP BSD Compression module registered
- <6>[ 3.096588] PPP Deflate Compression module registered
- <6>[ 3.102081] PPP MPPE Compression module registered
- <6>[ 3.106384] NET: Registered protocol family 24
- <6>[ 3.110687] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 3.120513] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 3.127990] wcnss_wlan probed in built-in mode
- <6>[ 3.133483] usbcore: registered new interface driver asix
- <6>[ 3.138336] usbcore: registered new interface driver cdc_ether
- <6>[ 3.144012] usbcore: registered new interface driver net1080
- <6>[ 3.149780] usbcore: registered new interface driver cdc_subset
- <6>[ 3.155548] usbcore: registered new interface driver zaurus
- <6>[ 3.161499] usbcore: registered new interface driver cdc_ncm
- <4>[ 3.167633] smb345_probe+
- <5>[ 3.172943] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L
- <5>[ 3.180938] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H
- <5>[ 3.189270] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L
- <4>[ 3.199401] smb345_probe-
- <4>[ 3.201843] i2c-core: driver [smb345] using legacy suspend method
- <4>[ 3.207885] i2c-core: driver [smb345] using legacy resume method
- <5>[ 3.214141] bq27541_probe + client->addr= 55
- <5>[ 3.219207] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.225006] bq27541_get_psp voltage_now= 4266000 uV
- <5>[ 3.229858] bq27541_get_capacity = 100% ret= 100
- <5>[ 3.234588] bq27541_get_psp temperature= 200 (0.1�XC)
- <5>[ 3.240447] bq27541_get_psp current = -82 mA
- <5>[ 3.244964] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.250579] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 3.256164] setup_low_battery_irq irq=317, LL_BAT_T30=1
- <5>[ 3.256408] bq27541_get_psp voltage_now= 4266000 uV
- <5>[ 3.257263] bq27541_get_capacity = 100% ret= 100
- <5>[ 3.258178] bq27541_get_psp temperature= 200 (0.1�XC)
- <5>[ 3.259918] bq27541_get_psp current = -82 mA
- <5>[ 3.279632] bq27541_probe - bq27541-battery driver registered
- <4>[ 3.285247] i2c-core: driver [bq27541-battery] using legacy suspend method
- <4>[ 3.292205] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 3.298919] msm_otg msm_otg: msm_otg probe
- <3>[ 3.303131] msm_otg msm_otg: failed to get phy_clk
- <6>[ 3.307678] msm_otg msm_otg: OTG regs = f0308000
- <3>[ 3.315155] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist
- <7>[ 3.321136] gpio_request: gpio-23 (msm_otg_ap_acok) status -16
- <4>[ 3.321136] gpio 23 request failed
- <4>[ 3.324462] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L
- <7>[ 3.331848] gpio_request: gpio-77 (msm_otg_id_pin) status -16
- <4>[ 3.331848] gpio 77 request failed
- <4>[ 3.335235] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H
- <6>[ 3.343170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 3.350280] usbcore: registered new interface driver cdc_acm
- <6>[ 3.355041] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 3.363098] Initializing USB Mass Storage driver...
- <6>[ 3.367889] usbcore: registered new interface driver usb-storage
- <6>[ 3.373962] USB Mass Storage support registered.
- <6>[ 3.378479] usbcore: registered new interface driver ums-alauda
- <6>[ 3.384521] usbcore: registered new interface driver ums-cypress
- <6>[ 3.390380] usbcore: registered new interface driver ums-datafab
- <6>[ 3.396484] usbcore: registered new interface driver ums-freecom
- <6>[ 3.402374] usbcore: registered new interface driver ums-isd200
- <6>[ 3.408325] usbcore: registered new interface driver ums-jumpshot
- <6>[ 3.414367] usbcore: registered new interface driver ums-karma
- <6>[ 3.420227] usbcore: registered new interface driver ums-onetouch
- <6>[ 3.426269] usbcore: registered new interface driver ums-sddr09
- <6>[ 3.432250] usbcore: registered new interface driver ums-sddr55
- <6>[ 3.438018] usbcore: registered new interface driver ums-usbat
- <6>[ 3.443969] usbcore: registered new interface driver usbserial
- <6>[ 3.449707] usbserial: USB Serial Driver core
- <6>[ 3.454040] usbcore: registered new interface driver qc_csvt
- <6>[ 3.459655] USB Serial support registered for qc_csvt
- <6>[ 3.464813] usbcore: registered new interface driver usb_ehset_test
- <6>[ 3.470947] usbcore: registered new interface driver diag_bridge
- <6>[ 3.477264] usbcore: registered new interface driver mdm_bridge
- <6>[ 3.483856] usbcore: registered new interface driver ks_bridge
- <6>[ 3.489074] ksb_init: init done
- <6>[ 3.492553] msm_otg msm_otg: phy_reset: success
- <6>[ 3.497985] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- <6>[ 3.510070] mbim_init: initialize 1 instances
- <6>[ 3.514068] mbim_init: Initialized 1 ports
- <6>[ 3.521087] rndis_qc_init: initialize rndis QC instance
- <6>[ 3.526184] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 3.532775] android_usb gadget: Number of LUNs=1
- <6>[ 3.537078] lun0: LUN: removable file: (no medium)
- <6>[ 3.542999] android_usb gadget: android_usb ready
- <6>[ 3.548187] mousedev: PS/2 mouse device common for all mice
- <6>[ 3.553955] usbcore: registered new interface driver xpad
- <6>[ 3.558624] usbcore: registered new interface driver usb_acecad
- <6>[ 3.564758] usbcore: registered new interface driver aiptek
- <6>[ 3.570068] usbcore: registered new interface driver gtco
- <6>[ 3.575683] usbcore: registered new interface driver hanwang
- <6>[ 3.581115] usbcore: registered new interface driver kbtab
- <6>[ 3.586791] usbcore: registered new interface driver wacom
- <4>[ 3.592010] [ektf3k]:[elan] elan_ktf3k_ts_init
- <4>[ 3.596832] [ektf3k]:[ELAN] Start HW reset!
- <4>[ 3.602020] [usb_otg] switch to peripheral mode by default (boot)
- <4>[ 3.861999] [ektf3k]:[elan]detect intr=>Old FW
- <4>[ 3.865814] [ektf3k]:The boot code is old!
- <4>[ 3.892303] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
- <4>[ 3.898498] [ektf3k]:[elan] hello packet's rc = 0
- <6>[ 3.903228] notifying plugin
- <6>[ 4.082122] msm_otg msm_otg: chg_type = USB_DCP_CHARGER
- <5>[ 4.086517] smb345_charger: [usb_cable_type_detect] INOK=L
- <5>[ 4.092041] smb345_charger: [usb_cable_type_detect] Cable: DCP
- <5>[ 4.098846] smb345_charger: [smb345_set_InputCurrentlimit] Disable AICL, retval=93 setting=83
- <5>[ 4.107116] smb345_charger: [smb345_set_InputCurrentlimit] Set ICL=1200 retval =24 setting=24
- <5>[ 4.115417] smb345_charger: [smb345_set_InputCurrentlimit] Re-enable AICL, setting=93
- <4>[ 4.129180] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044
- <4>[ 4.137084] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e
- <4>[ 4.144561] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2
- <4>[ 4.152099] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029
- <5>[ 4.158538] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8
- <4>[ 4.159484] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047
- <4>[ 4.159515] [ektf3k]:[Elan] Max X=2239, Max Y=1343
- <6>[ 4.159729] input: elan-touchscreen as /devices/virtual/input/input0
- <4>[ 4.160003] [ektf3k]:The firmware was version 0xA044 and id:0x3029
- <4>[ 4.160034] [ektf3k]: /proc/ektf_dbg created
- <4>[ 4.160400] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
- <4>[ 4.160491] [ektf3k]:[ELAN]misc_register finished!!
- <6>[ 4.160491] elan-ktf3k 3-0010: Update power source to 0
- <6>[ 4.161376] lis3dh_acc accelerometer driver: init
- <4>[ 4.161407] i2c-core: driver [lis3dh_acc] using legacy suspend method
- <4>[ 4.161437] i2c-core: driver [lis3dh_acc] using legacy resume method
- <6>[ 4.161682] ASUSTek: lid_driver_probe
- <6>[ 4.161865] input: lid_input as /devices/virtual/input/input1
- <6>[ 4.162750] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- <6>[ 4.163177] i2c /dev entries driver
- <3>[ 4.166748] ov5693_init_module:105
- <3>[ 4.167053] ov5693_init_module:110 rc -19
- <3>[ 4.201660] gpio 25 VCM_PD(1)
- <3>[ 4.201690] gpio 31 XSHUTDN(1)
- <6>[ 4.256896] mi1040_init_module:323
- <3>[ 4.257293] mi1040_init_module:329 rc -19
- <4>[ 4.268280] ========================================================
- <4>[ 4.274475] bq27541_battery_callback usb_cable_state = 3
- <4>[ 4.279602] ========================================================
- <6>[ 4.286193] battery_callback cable_wake_lock 5 sec...
- <6>[ 4.286193]
- <6>[ 4.292449] elan-ktf3k 3-0010: Update power source to 1
- <5>[ 4.298156] smb345_charger: [usb_cable_type_detect] AC cable detect, disable wpc_pok, disable DCIN
- <3>[ 4.431976] gpio 43 CAM_RST(1)
- <6>[ 4.491973] mi1040_sensor_match_id +++
- <6>[ 4.495422] Sensor id: 0x2481
- <6>[ 4.497833] PMIC gpio 11 CAM_VENDOR_1(0)
- <6>[ 4.501647] PMIC gpio 10 CAM_VENDOR_0(0)
- <6>[ 4.505584] PMIC gpio 24 CAM_LENS(0)
- <6>[ 4.507263] The USB cable status = CHARGER_DCP
- <3>[ 4.507293] msm_otg msm_otg: Failed notifying 2 charger type to PMIC
- <6>[ 4.507324] msm_otg msm_otg: Avail curr from USB = 1500
- <6>[ 4.525207] Vendor is B
- <6>[ 4.525268] msm_otg msm_otg: USB in low power mode
- <6>[ 4.532379] mi1040_sensor_match_id ---
- <6>[ 4.773925] lirc_dev: IR Remote Control driver registered, major 237
- <6>[ 4.779449] IR NEC protocol handler initialized
- <6>[ 4.784118] IR RC5(x) protocol handler initialized
- <6>[ 4.788726] IR RC6 protocol handler initialized
- <6>[ 4.793365] IR JVC protocol handler initialized
- <6>[ 4.797760] IR Sony protocol handler initialized
- <6>[ 4.802398] IR RC5 (streamzap) protocol handler initialized
- <6>[ 4.807983] IR SANYO protocol handler initialized
- <6>[ 4.812622] IR MCE Keyboard/mouse protocol handler initialized
- <6>[ 4.818511] IR LIRC bridge handler initialized
- <6>[ 4.823455] gspca_main: v2.14.0 registered
- <6>[ 4.827423] usbcore: registered new interface driver uvcvideo
- <6>[ 4.832702] USB Video Class driver (1.1.1)
- <3>[ 4.838104] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- <6>[ 4.845245] CAP1106: [cap1106_init]
- <4>[ 4.847930] i2c-core: driver [cap1106] using legacy suspend method
- <4>[ 4.854156] i2c-core: driver [cap1106] using legacy resume method
- <6>[ 4.884979] pm8xxx_tm_probe: OK
- <6>[ 4.887664] pm8xxx_tm_probe: OK
- <6>[ 4.891174] device-mapper: uevent: version 1.0.3
- <6>[ 4.895355] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 4.903778] Bluetooth: HCI UART driver ver 2.2
- <6>[ 4.907836] Bluetooth: HCI H4 protocol initialized
- <6>[ 4.912567] Bluetooth: HCIATH3K protocol initialized
- <6>[ 4.917877] Bluetooth: HCI_IBS protocol initialized
- <6>[ 4.923767] cpuidle: using governor ladder
- <6>[ 4.927062] cpuidle: using governor menu
- <6>[ 4.932403] mmc0: SDCC Version: 0x06000018
- <6>[ 4.937438] mmc0: bam physical base=0x12402000
- <6>[ 4.940948] mmc0: bam virtual base=0xf0334000
- <6>[ 4.945404] sps:BAM 0x12402000 is registered.
- <6>[ 4.949462] mmc0: BAM device registered. bam_handle=0xed8a3200
- <6>[ 4.957427] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <6>[ 4.964569] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- <6>[ 4.970336] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- <3>[ 4.976074] mmc0: No card detect facilities available
- <6>[ 4.983520] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- <6>[ 4.990936] mmc0: Controller capabilities: 0x0000039a
- <6>[ 4.996093] mmc0: 8 bit data mode enabled
- <6>[ 4.999969] mmc0: 4 bit data mode disabled
- <6>[ 5.004180] mmc0: polling status mode disabled
- <6>[ 5.008483] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- <6>[ 5.014251] mmc0: Slot eject status = 0
- <6>[ 5.017913] mmc0: Power save feature enable = 1
- <6>[ 5.022460] mmc0: SPS-BAM data transfer mode available
- <6>[ 5.030303] usbcore: registered new interface driver usbhid
- <6>[ 5.035003] usbhid: USB HID core driver
- <6>[ 5.045471] ashmem: initialized
- <6>[ 5.048950] usbcore: registered new interface driver snd-usb-audio
- <3>[ 5.056915] tabla_probe
- <6>[ 5.061431] msm_pcm_probe: dev name msm-voip-dsp
- <6>[ 5.065826] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
- <6>[ 5.076416] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
- <6>[ 5.089172] msm_pcm_probe: dev name msm-pcm-dsp
- <6>[ 5.093475] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- <6>[ 5.098846] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- <6>[ 5.103668] adding pm_qos request in low latency driver
- <6>[ 5.109039] done adding pm_qos request in low latency driver
- <6>[ 5.116149] msm_compr_probe: dev name msm-compr-dsp
- <6>[ 5.121429] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- <3>[ 5.129058] msm8930_audio_init: Not the right machine type
- <3>[ 5.133972] msm_audio_init: Not the right machine type
- <3>[ 5.136474] mmc0: RX still active
- <6>[ 5.136474] mmc0: SDCC PWR is ON
- <6>[ 5.136474] mmc0: SDCC clks are ON, MCLK rate=400000
- <6>[ 5.136505] mmc0: SDCC irq is enabled
- <6>[ 5.136505] ===== SDCC-CORE: Register Dumps @phys_base=0x12400000, @virt_base=0xf0332000 =====
- <6>[ 5.136505] Reg=0x00: 0x00000001, 0x01209d00, 0x00000000, 0x00001448
- <6>[ 5.136535] Reg=0x10: 0x00000008, 0x00000900, 0x0f5903ff, 0xffffffe0
- <6>[ 5.136535] Reg=0x20: 0x8a400042, 0x0004e5e8, 0x00000200, 0x0010200b
- <6>[ 5.136535] Reg=0x30: 0x00000000, 0x0026a400, 0x00000000, 0x408001ff
- <6>[ 5.136566] Reg=0x40: 0x00000000, 0x00000000, 0x00000000, 0x00000000
- <6>[ 5.136566] Reg=0x50: 0x06000018, 0x00000000, 0x00000000, 0x00000000
- <6>[ 5.136566] Reg=0x60: 0x60026400, 0x00000000, 0x00000000, 0x00000000
- <3>[ 5.136596] mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done=0, got_auto_prog_done=0, req_tout_ms=10000
- <6>[ 5.136596] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 5.136596] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=0, request_pending=0, request=0
- <6>[ 5.136871] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <6>[ 5.242279] mmc0: new HS200 MMC card at address 0001
- <6>[ 5.242309] msm_audio_init: Not APQ8064 in I2S mode
- <6>[ 5.253112] mmcblk0: mmc0:0001 MMC32G 28.8 GiB
- <6>[ 5.263946] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31
- <6>[ 5.332794] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 5.338409] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <6>[ 5.344390] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- <6>[ 5.349884] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- <6>[ 5.355041] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 5.360778] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- <6>[ 5.367248] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- <6>[ 5.373229] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- <6>[ 5.378906] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- <6>[ 5.384552] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- <6>[ 5.390380] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- <6>[ 5.396392] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- <6>[ 5.402404] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- <6>[ 5.408142] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- <6>[ 5.413513] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- <6>[ 5.419830] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- <6>[ 5.429382] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- <6>[ 5.434692] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- <6>[ 5.440399] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- <6>[ 5.446075] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- <6>[ 5.451782] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- <6>[ 5.457580] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- <6>[ 5.463470] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- <6>[ 5.468811] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- <6>[ 5.474487] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- <6>[ 5.479766] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- <6>[ 5.485260] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- <6>[ 5.490509] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- <6>[ 5.495758] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- <6>[ 5.501281] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- <6>[ 5.507232] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- <6>[ 5.512664] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
- <6>[ 5.518249] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- <6>[ 5.523895] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- <6>[ 5.529663] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- <6>[ 5.534851] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- <6>[ 5.540679] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
- <6>[ 5.548309] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2
- <6>[ 5.557342] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3
- <6>[ 5.570465] headset_init+ #####
- <6>[ 5.573791] input: h2w button as /devices/virtual/input/input4
- <6>[ 5.579376] HEADSET: Headset detection mode
- <6>[ 5.642242] set_hs_micbias badgap status: OFF power down bandgap
- <6>[ 5.647735] headset_init- #####
- <6>[ 5.650756] u32 classifier
- <6>[ 5.653320] Actions configured
- <6>[ 5.656860] Netfilter messages via NETLINK v0.30.
- <6>[ 5.661499] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 5.668975] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 5.673828] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 5.680633] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 5.687011] xt_time: kernel timezone is -0000
- <6>[ 5.691436] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 5.696838] arp_tables: (C) 2002 David S. Miller
- <6>[ 5.700836] TCP: cubic registered
- <6>[ 5.704193] Initializing XFRM netlink socket
- <6>[ 5.709381] NET: Registered protocol family 10
- <6>[ 5.719573] Mobile IPv6
- <6>[ 5.721466] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 5.727111] IPv6 over IPv4 tunneling driver
- <6>[ 5.732055] NET: Registered protocol family 17
- <6>[ 5.735961] NET: Registered protocol family 15
- <6>[ 5.740447] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 5.745269] Bluetooth: RFCOMM socket layer initialized
- <6>[ 5.750091] Bluetooth: RFCOMM ver 1.11
- <6>[ 5.753875] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 5.759307] Bluetooth: BNEP filters: protocol multicast
- <6>[ 5.764404] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 5.770660] L2TP core driver, V2.0
- <6>[ 5.773742] PPPoL2TP kernel driver, V2.0
- <5>[ 5.777740] Registering the dns_resolver key type
- <6>[ 5.784271] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- <5>[ 5.791442] Registering SWP/SWPB emulation handler
- <6>[ 5.796051] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 5.812194] MSM Watchdog Initialized
- <7>[ 5.824859] gpio_set_debounce: gpio-26 status -22
- <7>[ 5.824981] gpio_set_debounce: gpio-155 status -22
- <7>[ 5.825073] gpio_set_debounce: gpio-189 status -22
- <6>[ 5.825347] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5
- <6>[ 5.831512] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-11-12 07:50:00 UTC (1573545000)
- <3>[ 5.840179] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
- <3>[ 5.850250] Unable to register core for 0
- <4>[ 5.854217] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
- <6>[ 5.860839] ALSA device list:
- <6>[ 5.863555] #0: apq8064-tabla-snd-card
- <6>[ 5.868499] Freeing init memory: 1036K
- <5>[ 5.873413] init: init first stage started!
- <7>[ 5.879974] SELinux: 2048 avtab hash slots, 6784 rules.
- <7>[ 5.882385] SELinux: 2048 avtab hash slots, 6784 rules.
- <7>[ 5.882385] SELinux: 1 users, 2 roles, 662 types, 0 bools, 1 sens, 1024 cats
- <7>[ 5.882415] SELinux: 63 classes, 6784 rules
- <7>[ 5.883514] SELinux: Completing initialization.
- <7>[ 5.883544] SELinux: Setting up existing superblocks.
- <7>[ 5.883544] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 5.883575] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 5.884307] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 5.884338] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 5.884368] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 5.884399] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 5.918823] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 5.918853] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 5.918884] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 5.918884] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 5.918914] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
- <7>[ 5.918945] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 5.919036] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 5.919097] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 5.926269] type=1403 audit(1573545000.590:2): policy loaded auid=4294967295 ses=4294967295
- <5>[ 5.934417] init: (Initializing SELinux non-enforcing took 0.06s.)
- <5>[ 5.943603] init: init second stage started!
- <5>[ 5.953704] init: Running restorecon...
- <3>[ 6.030120] init: waitpid failed: No child processes
- <5>[ 6.035675] init: (Loading properties from /default.prop took 0.00s.)
- <3>[ 6.042175] init: /init.rc: 14: invalid keyword 'setcon'
- <3>[ 6.046783] init: /init.rc: 63: invalid keyword 'load_all_props'
- <3>[ 6.052734] init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
- <3>[ 6.062347] init: could not import file '/init.recovery.mksh.rc' from '/init.rc': No such file or directory
- <5>[ 6.072296] init: (Parsing /init.recovery.usb.rc took 0.00s.)
- <5>[ 6.077819] init: (Parsing /init.recovery.service.rc took 0.00s.)
- <3>[ 6.083801] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc': No such file or directory
- <3>[ 6.094268] init: could not import file '/init.recovery.flo.rc' from '/init.rc': No such file or directory
- <5>[ 6.103881] init: (Parsing /init.rc took 0.06s.)
- <5>[ 6.108581] type=1400 audit(1573545000.770:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
- <5>[ 6.125061] init: Starting service 'ueventd'...
- <5>[ 6.129791] init: Waiting for /dev/.coldboot_done...
- <5>[ 6.132415] ueventd: ueventd started!
- <5>[ 6.144104] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 6.149017] bq27541_get_psp voltage_now= 4264000 uV
- <5>[ 6.153839] bq27541_get_capacity = 100% ret= 100
- <5>[ 6.158416] bq27541_get_psp temperature= 200 (0.1�XC)
- <5>[ 6.164367] bq27541_get_psp current = -83 mA
- <5>[ 6.292510] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 6.298217] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 6.303131] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 6.308074] bq27541_get_psp voltage_now= 4264000 uV
- <5>[ 6.312896] bq27541_get_capacity = 100% ret= 100
- <5>[ 6.317474] bq27541_get_psp temperature= 200 (0.1�XC)
- <5>[ 6.323425] bq27541_get_psp current = -83 mA
- <5>[ 6.402404] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73
- <5>[ 6.411224] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4264000
- <5>[ 6.418853] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 6.426361] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 6.533142] ueventd: Coldboot took 0.40s.
- <5>[ 6.542755] init: Waiting for /dev/.coldboot_done took 0.41s.
- <7>[ 6.649200] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 6.650451] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 6.652069] enable_store: android_usb: already disabled
- <5>[ 6.656585] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
- <5>[ 6.667572] init: (Loading properties from /system/build.prop took 0.00s.)
- <5>[ 6.674072] init: (Loading properties from /vendor/build.prop took 0.00s.)
- <5>[ 6.680908] init: (Loading properties from /factory/factory.prop took 0.00s.)
- <5>[ 6.694793] init: (Loading properties from /data/local.prop took 0.00s.)
- <3>[ 6.700622] init: Unable to open persistent property directory "/data/property": No such file or directory
- <5>[ 6.711486] init: Starting service 'set_permissive'...
- <5>[ 6.716156] init: Starting service 'recovery'...
- <5>[ 6.721008] init: Starting service 'adbd'...
- <6>[ 6.730377] adb_open
- <6>[ 6.731597] adb_bind_config
- <5>[ 6.743652] type=1400 audit(1573545001.400:4): avc: denied { write } for pid=153 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
- <5>[ 6.763854] init: Service 'set_permissive' (pid 149) exited with status 0
- <3>[ 6.832946] init: avc: denied { set } for property=twrp.crash_counter pid=150 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
- <4>[ 6.876464] mipi_dsi_panel_power+, on=1
- <4>[ 6.952331] mipi_dsi_panel_power-
- <6>[ 6.957916] mipi_JDI_lcd_on+
- <6>[ 6.957916] mipi_JDI_lcd_on-, booting
- <6>[ 6.989959] mipi_JDI_set_recovery_backlight: 100/255
- <6>[ 7.052764] mipi_JDI_lcd_off+
- <6>[ 7.052764] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing
- <4>[ 7.052795] mipi_dsi_panel_power+, on=0
- <6>[ 7.052795] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <4>[ 7.074432] mipi_dsi_panel_power+, on=1
- <6>[ 7.074432] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <6>[ 7.080688] mipi_JDI_lcd_on+
- <6>[ 7.080688] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing
- <6>[ 7.192413] mipi_JDI_set_backlight: pwm enable
- <5>[ 7.250457] type=1400 audit(1573545001.910:5): avc: denied { write } for pid=150 comm="recovery" name="etc" dev="rootfs" ino=5820 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 7.268402] type=1400 audit(1573545001.930:6): avc: denied { add_name } for pid=150 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 7.285644] type=1400 audit(1573545001.950:7): avc: denied { create } for pid=150 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- <5>[ 7.303802] type=1400 audit(1573545001.970:8): avc: denied { create } for pid=150 comm="recovery" name="vendor" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <3>[ 7.346099] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.353942] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.361236] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.369049] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.454650] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.462463] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.529846] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.537597] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.564056] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.571868] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.713836] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.721618] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 7.986480] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 7.994232] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 8.001647] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 8.009460] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 8.095428] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 8.103668] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <3>[ 8.111053] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 8.119293] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <5>[ 8.185577] type=1400 audit(1573545002.851:9): avc: denied { create } for pid=150 comm="recovery" name="fstab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
- <5>[ 8.201934] type=1400 audit(1573545002.861:10): avc: denied { write } for pid=150 comm="recovery" name="fstab" dev="rootfs" ino=8296 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
- <3>[ 8.240539] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 8.248352] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 8.255706] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 8.263488] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <6>[ 8.351501] EXT4-fs (mmcblk0p22): mounted filesystem without journal. Opts:
- <7>[ 8.357666] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
- <6>[ 8.383605] EXT4-fs (mmcblk0p22): mounted filesystem without journal. Opts:
- <7>[ 8.389770] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
- <6>[ 8.418884] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:
- <7>[ 8.425659] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
- <3>[ 8.451812] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 8.459564] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 8.466949] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 8.474761] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 8.560546] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 8.568786] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <3>[ 9.018432] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 9.026702] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <3>[ 14.115051] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.122894] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 14.130004] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.137786] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <5>[ 14.205047] type=1400 audit(1573545008.867:11): avc: denied { create } for pid=150 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
- <5>[ 14.222167] type=1400 audit(1573545008.877:12): avc: denied { bind } for pid=150 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
- <3>[ 14.258453] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.266204] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 14.333496] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.341308] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 14.361480] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.369293] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 14.376434] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.384246] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 14.969116] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 14.976867] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 15.044189] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 15.052001] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 15.761840] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 15.769653] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 15.776916] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 15.784729] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 16.369934] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 16.377746] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 16.444946] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 16.452758] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 16.977600] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 16.985473] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 16.992614] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 17.000396] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 17.585327] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 17.593139] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <3>[ 17.660278] EXT4-fs (mmcblk0p31): ext4_check_descriptors: Checksum for group 0 failed (6097!=0)
- <3>[ 17.668090] EXT4-fs (mmcblk0p31): group descriptors corrupted!
- <5>[ 18.041931] bq27541_get_capacity = 100% ret= 100
- <5>[ 18.046569] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 19.604827] type=1400 audit(1573545014.262:13): avc: denied { open } for pid=150 comm="recovery" name="u:object_r:userinit_prop:s0" dev="tmpfs" ino=8211 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
- <5>[ 19.625488] type=1400 audit(1573545014.292:14): avc: denied { getattr } for pid=150 comm="recovery" path="/dev/__properties__/u:object_r:userinit_prop:s0" dev="tmpfs" ino=8211 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
- <5>[ 19.648986] type=1400 audit(1573545014.312:15): avc: denied { open } for pid=150 comm="recovery" name="u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=8212 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
- <5>[ 19.669982] type=1400 audit(1573545014.332:16): avc: denied { getattr } for pid=150 comm="recovery" path="/dev/__properties__/u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=8212 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
- <5>[ 19.695129] type=1400 audit(1573545014.352:17): avc: denied { open } for pid=150 comm="recovery" name="u:object_r:safemode_prop:s0" dev="tmpfs" ino=8221 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
- <5>[ 19.715789] type=1400 audit(1573545014.382:18): avc: denied { getattr } for pid=150 comm="recovery" path="/dev/__properties__/u:object_r:safemode_prop:s0" dev="tmpfs" ino=8221 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
- <5>[ 19.739257] type=1400 audit(1573545014.402:19): avc: denied { open } for pid=150 comm="recovery" name="u:object_r:mmc_prop:s0" dev="tmpfs" ino=8222 scontext=u:r:recovery:s0 tcontext=u:object_r:mmc_prop:s0 tclass=file permissive=1
- <5>[ 19.759765] type=1400 audit(1573545014.422:20): avc: denied { getattr } for pid=150 comm="recovery" path="/dev/__properties__/u:object_r:mmc_prop:s0" dev="tmpfs" ino=8222 scontext=u:r:recovery:s0 tcontext=u:object_r:mmc_prop:s0 tclass=file permissive=1
- <5>[ 19.782409] type=1400 audit(1573545014.442:21): avc: denied { open } for pid=150 comm="recovery" name="u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=8223 scontext=u:r:recovery:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
- <5>[ 19.805694] type=1400 audit(1573545014.463:22): avc: denied { getattr } for pid=150 comm="recovery" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=8223 scontext=u:r:recovery:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
- <3>[ 19.853057] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 19.861297] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <3>[ 19.873901] EXT4-fs (mmcblk0p23): ext4_check_descriptors: Checksum for group 0 failed (15301!=13051)
- <3>[ 19.882110] EXT4-fs (mmcblk0p23): group descriptors corrupted!
- <3>[ 25.408569] mmc0: CMD18: Data timeout
- <6>[ 25.411315] mmc0: SDCC PWR is ON
- <6>[ 25.414459] mmc0: SDCC clks are ON, MCLK rate=96000000
- <6>[ 25.419586] mmc0: SDCC irq is enabled
- <6>[ 25.423278] ===== SDCC-CORE: Register Dumps @phys_base=0x12400000, @virt_base=0xf0332000 =====
- <6>[ 25.431823] Reg=0x00: 0x00000001, 0x01209f00, 0x0043773a, 0x00001452
- <6>[ 25.438201] Reg=0x10: 0x00000012, 0x02000900, 0x4d433332, 0x47530d1c
- <6>[ 25.444549] Reg=0x20: 0x89fe31e4, 0x0493e3e8, 0x00001000, 0x0010200b
- <6>[ 25.450836] Reg=0x30: 0x00001000, 0x000c0400, 0x00000000, 0x408001ff
- <6>[ 25.457214] Reg=0x40: 0x00000000, 0x00000000, 0x00000000, 0x00000000
- <6>[ 25.463500] Reg=0x50: 0x06000018, 0x00000000, 0x00000000, 0x00000000
- <6>[ 25.469879] Reg=0x60: 0x60026400, 0x00000000, 0x00000000, 0x00000000
- <6>[ 25.476165] ===== SDCC-DML: Register Dumps @phys_base=0x12400800, @virt_base=0xf036c800 =====
- <6>[ 25.484741] Reg=0x00: 0x00000011, 0x00010000, 0x00000000, 0x00000000
- <6>[ 25.491058] Reg=0x10: 0x00000000, 0x00001000, 0x00001000, 0x00020001
- <6>[ 25.497344] Reg=0x20: 0x00000000, 0x00000200, 0x00001000, 0x00000000
- <6>[ 25.503753] Reg=0x30: 0x00000000, 0x00000000, 0x00000000, 0x00000000
- <6>[ 25.510040] mmc0: SPS mode: busy=1
- <6>[ 25.513458] mmc0: xfer_size=4096, data_xfered=0, xfer_remain=4096
- <3>[ 25.519500] mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done=0, got_auto_prog_done=0, req_tout_ms=10000
- <6>[ 25.529876] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 25.536834] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=0, request_pending=0, request=0
- <6>[ 25.549041] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 25.555023] mmcblk0: error -110 sending stop command, original cmd response 0x2000900, card status 0x2400900
- <3>[ 25.564880] mmcblk0: error -110 transferring data, sector 4421434, nr 8, cmd response 0x2000900, card status 0x0
- <4>[ 26.713653] mmcblk0: retrying using single block read
- <6>[ 26.723297] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 26.733795] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.744445] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.754852] mmcblk0: error -110 sending status command, aborting
- <3>[ 26.759948] end_request: I/O error, dev mmcblk0, sector 4421434
- <4>[ 26.765838] quiet_error: 15 callbacks suppressed
- <3>[ 26.770446] Buffer I/O error on device mmcblk0p23, logical block 74688
- <3>[ 26.776916] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 26.782867] Buffer I/O error on device mmcblk0p23, logical block 74689
- <3>[ 26.789337] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 26.795288] Buffer I/O error on device mmcblk0p23, logical block 74690
- <3>[ 26.801788] end_request: I/O error, dev mmcblk0, sector 4421440
- <3>[ 26.807647] Buffer I/O error on device mmcblk0p23, logical block 74691
- <6>[ 26.817993] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 26.828521] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.839202] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.849609] mmcblk0: error -110 sending status command, aborting
- <3>[ 26.854705] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 26.860534] Buffer I/O error on device mmcblk0p23, logical block 74688
- <3>[ 26.867126] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 26.872955] Buffer I/O error on device mmcblk0p23, logical block 74689
- <3>[ 26.879547] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 26.885375] Buffer I/O error on device mmcblk0p23, logical block 74690
- <3>[ 26.891937] end_request: I/O error, dev mmcblk0, sector 4421440
- <3>[ 26.897857] Buffer I/O error on device mmcblk0p23, logical block 74691
- <6>[ 26.905456] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 26.916015] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.926605] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.937072] mmcblk0: error -110 sending status command, aborting
- <3>[ 26.942108] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 26.948120] EXT4-fs (mmcblk0p23): unable to read superblock
- <6>[ 26.954833] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 26.965393] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.975982] mmcblk0: error -110 sending status command, retrying
- <3>[ 26.986450] mmcblk0: error -110 sending status command, aborting
- <3>[ 26.991485] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 26.997497] EXT4-fs (mmcblk0p23): unable to read superblock
- <5>[ 29.603332] type=1400 audit(1573545023.994:28): avc: denied { setattr } for pid=150 comm="recovery" name="recovery" dev="rootfs" ino=8297 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 29.622161] type=1400 audit(1573545024.014:29): avc: denied { setattr } for pid=150 comm="recovery" name="last_log" dev="rootfs" ino=8298 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
- <6>[ 29.647888] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.658447] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.669067] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.679565] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.684631] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 29.690551] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 29.696411] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 29.702362] end_request: I/O error, dev mmcblk0, sector 4421440
- <6>[ 29.709136] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.719757] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.730346] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.740844] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.745880] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 29.751831] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 29.757690] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 29.763641] end_request: I/O error, dev mmcblk0, sector 4421440
- <6>[ 29.770568] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.781158] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.791809] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.802246] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.807342] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 29.813232] EXT4-fs (mmcblk0p23): unable to read superblock
- <6>[ 29.824127] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.834625] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.845275] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.855682] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.860778] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 29.866668] EXT4-fs (mmcblk0p23): unable to read superblock
- <6>[ 29.875183] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.885711] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.896331] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.906768] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.911834] end_request: I/O error, dev mmcblk0, sector 4421632
- <6>[ 29.919281] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.929870] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.940460] mmcblk0: error -110 sending status command, retrying
- <3>[ 29.950958] mmcblk0: error -110 sending status command, aborting
- <3>[ 29.956054] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 29.961883] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 29.967864] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 29.973724] end_request: I/O error, dev mmcblk0, sector 4421440
- <6>[ 29.980560] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 29.991119] mmcblk0: error -110 sending status command, retrying
- <3>[ 30.001770] mmcblk0: error -110 sending status command, retrying
- <3>[ 30.012207] mmcblk0: error -110 sending status command, aborting
- <3>[ 30.017303] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 30.023162] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 30.029083] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 30.034942] end_request: I/O error, dev mmcblk0, sector 4421440
- <6>[ 30.041961] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 30.052520] mmcblk0: error -110 sending status command, retrying
- <3>[ 30.063171] mmcblk0: error -110 sending status command, retrying
- <3>[ 30.073577] mmcblk0: error -110 sending status command, aborting
- <3>[ 30.078674] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 30.084625] EXT4-fs (mmcblk0p23): unable to read superblock
- <6>[ 34.608642] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 34.619232] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.629852] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.640319] mmcblk0: error -110 sending status command, aborting
- <3>[ 34.645385] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 34.651336] EXT4-fs (mmcblk0p23): unable to read superblock
- <6>[ 34.658599] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 34.669219] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.679809] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.690307] mmcblk0: error -110 sending status command, aborting
- <3>[ 34.695343] end_request: I/O error, dev mmcblk0, sector 60424000
- <4>[ 34.701354] quiet_error: 19 callbacks suppressed
- <3>[ 34.705963] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 34.712738] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 34.718688] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 34.725524] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 34.731506] Buffer I/O error on device mmcblk0p31, logical block 55324418
- <3>[ 34.738220] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 34.744262] Buffer I/O error on device mmcblk0p31, logical block 55324419
- <3>[ 34.750976] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 34.757049] Buffer I/O error on device mmcblk0p31, logical block 55324420
- <3>[ 34.763763] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 34.769775] Buffer I/O error on device mmcblk0p31, logical block 55324421
- <3>[ 34.776550] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 34.782470] Buffer I/O error on device mmcblk0p31, logical block 55324422
- <3>[ 34.789306] end_request: I/O error, dev mmcblk0, sector 60424007
- <3>[ 34.795257] Buffer I/O error on device mmcblk0p31, logical block 55324423
- <6>[ 34.802978] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 34.813537] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.824157] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.834594] mmcblk0: error -110 sending status command, aborting
- <3>[ 34.839660] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 34.845611] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 34.852416] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 34.858428] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 34.865173] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 34.871185] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 34.877136] end_request: I/O error, dev mmcblk0, sector 60424004
- <6>[ 34.884033] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 34.894592] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.905242] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.915649] mmcblk0: error -110 sending status command, aborting
- <3>[ 34.920715] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 34.926696] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 34.932708] end_request: I/O error, dev mmcblk0, sector 60424007
- <6>[ 34.939788] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 34.950347] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.960998] mmcblk0: error -110 sending status command, retrying
- <3>[ 34.971435] mmcblk0: error -110 sending status command, aborting
- <3>[ 34.976531] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 34.982360] EXT4-fs (mmcblk0p31): unable to read superblock
- <6>[ 35.218566] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 35.229125] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.239776] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.250213] mmcblk0: error -110 sending status command, aborting
- <3>[ 35.255310] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 35.261169] EXT4-fs (mmcblk0p31): unable to read superblock
- <6>[ 35.832946] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 35.843505] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.854125] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.864562] mmcblk0: error -110 sending status command, aborting
- <3>[ 35.869628] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 35.875640] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 35.881561] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 35.887603] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 35.893554] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 35.899566] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 35.905548] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 35.911560] end_request: I/O error, dev mmcblk0, sector 60424007
- <6>[ 35.918426] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 35.929046] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.939666] mmcblk0: error -110 sending status command, retrying
- <3>[ 35.950134] mmcblk0: error -110 sending status command, aborting
- <3>[ 35.955200] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 35.961212] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 35.967163] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 35.973236] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 35.979187] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 35.985137] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 35.991149] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 35.997131] end_request: I/O error, dev mmcblk0, sector 60424007
- <6>[ 36.004211] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 36.014739] mmcblk0: error -110 sending status command, retrying
- <3>[ 36.025390] mmcblk0: error -110 sending status command, retrying
- <3>[ 36.035797] mmcblk0: error -110 sending status command, aborting
- <3>[ 36.040893] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 36.046783] EXT4-fs (mmcblk0p31): unable to read superblock
- <6>[ 36.054107] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 36.064636] mmcblk0: error -110 sending status command, retrying
- <3>[ 36.075286] mmcblk0: error -110 sending status command, retrying
- <3>[ 36.085693] mmcblk0: error -110 sending status command, aborting
- <3>[ 36.090789] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 36.096679] EXT4-fs (mmcblk0p31): unable to read superblock
- <3>[ 41.129455] mmc0: Power Off Notification timed out, 250
- <4>[ 41.136718] ------------[ cut here ]------------
- <4>[ 41.140411] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 41.152496] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 41.157653] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.167083] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.176635] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 41.185821] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 41.195129] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 41.204498] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 41.213745] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 41.222198] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 41.230529] ---[ end trace da227214a82491b9 ]---
- <6>[ 41.235076] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 41.242034] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 41.255249] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 41.265869] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.276458] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.286926] mmcblk0: error -110 sending status command, aborting
- <3>[ 41.291961] end_request: I/O error, dev mmcblk0, sector 4421434
- <4>[ 41.297912] quiet_error: 22 callbacks suppressed
- <3>[ 41.302459] Buffer I/O error on device mmcblk0p23, logical block 74688
- <3>[ 41.309051] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 41.314880] Buffer I/O error on device mmcblk0p23, logical block 74689
- <3>[ 41.321441] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 41.327301] Buffer I/O error on device mmcblk0p23, logical block 74690
- <3>[ 41.333862] end_request: I/O error, dev mmcblk0, sector 4421440
- <3>[ 41.339691] Buffer I/O error on device mmcblk0p23, logical block 74691
- <4>[ 41.346313] ------------[ cut here ]------------
- <4>[ 41.350799] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 41.362945] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 41.368225] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.377624] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.387176] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 41.396301] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 41.405487] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 41.414764] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 41.424133] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 41.432525] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 41.440826] ---[ end trace da227214a82491ba ]---
- <6>[ 41.445495] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 41.452362] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 41.464782] ------------[ cut here ]------------
- <4>[ 41.469360] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 41.481414] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 41.487091] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.496002] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.505554] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 41.514770] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 41.524047] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 41.533416] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 41.542633] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 41.551147] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 41.559448] ---[ end trace da227214a82491bb ]---
- <6>[ 41.564025] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 41.570983] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 41.584686] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 41.595275] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.605865] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.616302] mmcblk0: error -110 sending status command, aborting
- <3>[ 41.621337] end_request: I/O error, dev mmcblk0, sector 4421434
- <3>[ 41.627319] Buffer I/O error on device mmcblk0p23, logical block 74688
- <3>[ 41.633758] end_request: I/O error, dev mmcblk0, sector 4421436
- <3>[ 41.639709] Buffer I/O error on device mmcblk0p23, logical block 74689
- <3>[ 41.646179] end_request: I/O error, dev mmcblk0, sector 4421438
- <3>[ 41.652130] Buffer I/O error on device mmcblk0p23, logical block 74690
- <3>[ 41.658599] end_request: I/O error, dev mmcblk0, sector 4421440
- <3>[ 41.664550] Buffer I/O error on device mmcblk0p23, logical block 74691
- <4>[ 41.671081] ------------[ cut here ]------------
- <4>[ 41.675628] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 41.687744] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 41.693023] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.702362] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.711944] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 41.721160] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 41.730285] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 41.739562] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 41.748931] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 41.757293] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 41.765686] ---[ end trace da227214a82491bc ]---
- <6>[ 41.770202] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 41.777252] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 41.789581] ------------[ cut here ]------------
- <4>[ 41.794158] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 41.806213] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 41.811370] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.821289] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.830352] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 41.839569] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 41.848785] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 41.858215] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 41.867523] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 41.875946] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 41.884246] ---[ end trace da227214a82491bd ]---
- <6>[ 41.888793] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 41.895812] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 41.909484] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 41.920013] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.930694] mmcblk0: error -110 sending status command, retrying
- <3>[ 41.941101] mmcblk0: error -110 sending status command, aborting
- <3>[ 41.946228] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 41.952056] EXT4-fs (mmcblk0p23): unable to read superblock
- <4>[ 41.957672] ------------[ cut here ]------------
- <4>[ 41.962219] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 41.974334] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 41.979614] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 41.989013] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 41.998504] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 42.007720] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 42.016876] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 42.026184] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 42.035552] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 42.043945] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 42.052215] ---[ end trace da227214a82491be ]---
- <6>[ 42.056915] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 42.063781] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 66.573272] ------------[ cut here ]------------
- <5>[ 66.573669] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <4>[ 66.582641] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <5>[ 66.583984] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 66.584838] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 66.585662] bq27541_get_psp voltage_now= 4248000 uV
- <5>[ 66.586517] bq27541_get_capacity = 100% ret= 100
- <5>[ 66.587341] bq27541_get_psp temperature= 201 (0.1�XC)
- <5>[ 66.589019] bq27541_get_psp current = -163 mA
- <4>[ 66.623443] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 66.628631] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 66.638092] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 66.647644] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 66.656829] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 66.666107] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <5>[ 66.675170] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 66.675781] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4264000
- <5>[ 66.676666] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 66.677307] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <4>[ 66.706176] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 66.715515] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 66.723968] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 66.732238] ---[ end trace da227214a82491bf ]---
- <6>[ 66.736816] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 66.743804] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 66.757537] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 66.768066] mmcblk0: error -110 sending status command, retrying
- <3>[ 66.778717] mmcblk0: error -110 sending status command, retrying
- <3>[ 66.789154] mmcblk0: error -110 sending status command, aborting
- <3>[ 66.794281] end_request: I/O error, dev mmcblk0, sector 4272060
- <3>[ 66.800109] EXT4-fs (mmcblk0p23): unable to read superblock
- <4>[ 66.805725] ------------[ cut here ]------------
- <4>[ 66.810241] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 66.822387] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 66.827697] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 66.837066] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 66.846618] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 66.855743] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 66.864929] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 66.874206] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 66.883575] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 66.891998] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 66.900268] ---[ end trace da227214a82491c0 ]---
- <6>[ 66.904937] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 66.911804] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <5>[ 126.893493] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 126.899169] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 126.904113] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 126.909088] bq27541_get_psp voltage_now= 4243000 uV
- <5>[ 126.913879] bq27541_get_capacity = 100% ret= 100
- <5>[ 126.918518] bq27541_get_psp temperature= 201 (0.1�XC)
- <5>[ 126.924346] bq27541_get_psp current = -180 mA
- <5>[ 127.003356] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 127.010803] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4248000
- <5>[ 127.018737] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 127.026306] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 187.053497] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 187.059204] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 187.064117] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 187.069091] bq27541_get_psp voltage_now= 4241000 uV
- <5>[ 187.073913] bq27541_get_capacity = 100% ret= 100
- <5>[ 187.078491] bq27541_get_psp temperature= 203 (0.1�XC)
- <5>[ 187.084411] bq27541_get_psp current = -171 mA
- <5>[ 187.163360] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 187.170867] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4243000
- <5>[ 187.178741] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 187.186248] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 247.213531] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 247.219207] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 247.224121] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 247.229034] bq27541_get_psp voltage_now= 4238000 uV
- <5>[ 247.233978] bq27541_get_capacity = 100% ret= 100
- <5>[ 247.238494] bq27541_get_psp temperature= 205 (0.1�XC)
- <5>[ 247.244415] bq27541_get_psp current = -181 mA
- <5>[ 247.323394] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 247.330871] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4241000
- <5>[ 247.338714] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 247.346313] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 307.373535] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 307.379150] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 307.384185] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 307.389038] bq27541_get_psp voltage_now= 4237000 uV
- <5>[ 307.393951] bq27541_get_capacity = 100% ret= 100
- <5>[ 307.398498] bq27541_get_psp temperature= 207 (0.1�XC)
- <5>[ 307.404357] bq27541_get_psp current = -176 mA
- <5>[ 307.483428] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 307.490936] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4238000
- <5>[ 307.498779] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 307.506347] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <4>[ 349.884124] ------------[ cut here ]------------
- <4>[ 349.887786] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 349.899932] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 349.905120] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 349.914428] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 349.924041] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 349.933258] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 349.942504] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 349.951904] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 349.961181] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 349.969573] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 349.977935] ---[ end trace da227214a82491c1 ]---
- <6>[ 349.982482] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 349.989501] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 350.003204] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 350.013793] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.024383] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.034851] mmcblk0: error -110 sending status command, aborting
- <3>[ 350.039886] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 350.045959] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 350.052642] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 350.058715] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 350.065490] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 350.071380] Buffer I/O error on device mmcblk0p31, logical block 55324418
- <3>[ 350.078247] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 350.084167] Buffer I/O error on device mmcblk0p31, logical block 55324419
- <3>[ 350.090972] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 350.096954] Buffer I/O error on device mmcblk0p31, logical block 55324420
- <3>[ 350.103759] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 350.109680] Buffer I/O error on device mmcblk0p31, logical block 55324421
- <3>[ 350.116516] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 350.122497] Buffer I/O error on device mmcblk0p31, logical block 55324422
- <3>[ 350.129211] end_request: I/O error, dev mmcblk0, sector 60424007
- <3>[ 350.135253] Buffer I/O error on device mmcblk0p31, logical block 55324423
- <4>[ 350.142028] ------------[ cut here ]------------
- <4>[ 350.146636] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 350.158721] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 350.163940] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 350.173370] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 350.182922] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 350.192138] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 350.201263] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 350.210479] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 350.219909] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 350.228332] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 350.237152] ---[ end trace da227214a82491c2 ]---
- <6>[ 350.241180] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 350.248199] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 350.260559] ------------[ cut here ]------------
- <4>[ 350.265075] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 350.277191] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 350.282379] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 350.291778] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 350.301330] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 350.310485] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 350.319824] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 350.329193] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 350.338470] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 350.346893] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 350.355163] ---[ end trace da227214a82491c3 ]---
- <6>[ 350.359802] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 350.366729] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 350.380462] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 350.391052] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.401702] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.412139] mmcblk0: error -110 sending status command, aborting
- <3>[ 350.417266] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 350.423187] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 350.429992] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 350.435943] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 350.442749] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 350.448699] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 350.454742] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 350.460662] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 350.466735] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 350.472686] end_request: I/O error, dev mmcblk0, sector 60424007
- <4>[ 350.478698] ------------[ cut here ]------------
- <4>[ 350.483245] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 350.495422] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 350.500610] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 350.510040] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 350.519592] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 350.528778] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 350.537841] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 350.547210] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 350.556579] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 350.565002] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 350.573272] ---[ end trace da227214a82491c4 ]---
- <6>[ 350.577850] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 350.584869] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 350.597229] ------------[ cut here ]------------
- <4>[ 350.601715] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 350.614349] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 350.619049] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 350.628387] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 350.638000] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 350.647216] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 350.656494] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 350.665863] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 350.675140] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 350.683502] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 350.691864] ---[ end trace da227214a82491c5 ]---
- <6>[ 350.696441] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 350.703430] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 350.717132] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 350.727691] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.738281] mmcblk0: error -110 sending status command, retrying
- <3>[ 350.748779] mmcblk0: error -110 sending status command, aborting
- <3>[ 350.753814] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 350.759796] EXT4-fs (mmcblk0p31): unable to read superblock
- <4>[ 350.765258] ------------[ cut here ]------------
- <4>[ 350.769927] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 350.782012] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 350.787261] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 350.796691] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 350.806213] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 350.815429] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 350.824523] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 350.833770] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 350.843200] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 350.851593] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 350.859954] ---[ end trace da227214a82491c6 ]---
- <6>[ 350.864501] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 350.871459] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <5>[ 367.534027] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 367.539642] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 367.544677] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 367.549530] bq27541_get_psp voltage_now= 4239000 uV
- <5>[ 367.554443] bq27541_get_capacity = 100% ret= 100
- <5>[ 367.558990] bq27541_get_psp temperature= 209 (0.1�XC)
- <5>[ 367.564941] bq27541_get_psp current = -150 mA
- <4>[ 367.633300] ------------[ cut here ]------------
- <4>[ 367.636932] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 367.649139] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 367.654327] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 367.663726] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <5>[ 367.663757] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <4>[ 367.681030] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 367.690277] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <5>[ 367.690307] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4237000
- <4>[ 367.707122] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 367.716430] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 367.725799] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <5>[ 367.725830] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <4>[ 367.742034] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 367.750305] ---[ end trace da227214a82491c7 ]---
- <5>[ 367.750335] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <6>[ 367.762481] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 367.769378] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 367.783081] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 367.793701] mmcblk0: error -110 sending status command, retrying
- <3>[ 367.804290] mmcblk0: error -110 sending status command, retrying
- <3>[ 367.814758] mmcblk0: error -110 sending status command, aborting
- <3>[ 367.819793] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 367.825775] EXT4-fs (mmcblk0p31): unable to read superblock
- <4>[ 367.831237] ------------[ cut here ]------------
- <4>[ 367.835937] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 367.847991] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 367.853240] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 367.862640] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 367.872192] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 367.881408] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 367.890533] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 367.899749] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 367.909118] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 367.917602] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 367.925933] ---[ end trace da227214a82491c8 ]---
- <6>[ 367.930450] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 367.937469] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <3>[ 375.657989] init: avc: denied { set } for property=sys.usb.config pid=150 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
- <6>[ 375.674377] adb_release
- <4>[ 375.674530] enable_store: 1 callbacks suppressed
- <3>[ 375.674560] enable_store: android_usb: already disabled
- <6>[ 375.674682] mtp_bind_config
- <6>[ 375.674713] adb_bind_config
- <4>[ 375.691772] ------------[ cut here ]------------
- <6>[ 375.691986] adb_open
- <6>[ 375.691986] mtp_bind_config
- <6>[ 375.692016] adb_bind_config
- <4>[ 375.704132] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 375.716217] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 375.721405] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 375.730743] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 375.740356] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 375.749572] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 375.758850] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 375.768218] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 375.777496] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 375.785888] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 375.794250] ---[ end trace da227214a82491c9 ]---
- <6>[ 375.798828] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 375.805755] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 375.819580] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 375.830230] mmcblk0: error -110 sending status command, retrying
- <3>[ 375.840820] mmcblk0: error -110 sending status command, retrying
- <3>[ 375.851318] mmcblk0: error -110 sending status command, aborting
- <3>[ 375.856384] end_request: I/O error, dev mmcblk0, sector 60424000
- <4>[ 375.862396] quiet_error: 6 callbacks suppressed
- <3>[ 375.866851] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 375.873687] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 375.879608] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 375.886444] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 375.892425] Buffer I/O error on device mmcblk0p31, logical block 55324418
- <3>[ 375.899139] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 375.905181] Buffer I/O error on device mmcblk0p31, logical block 55324419
- <3>[ 375.911895] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 375.917938] Buffer I/O error on device mmcblk0p31, logical block 55324420
- <3>[ 375.924682] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 375.930694] Buffer I/O error on device mmcblk0p31, logical block 55324421
- <3>[ 375.937500] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 375.943420] Buffer I/O error on device mmcblk0p31, logical block 55324422
- <3>[ 375.950225] end_request: I/O error, dev mmcblk0, sector 60424007
- <3>[ 375.956176] Buffer I/O error on device mmcblk0p31, logical block 55324423
- <4>[ 375.963043] ------------[ cut here ]------------
- <4>[ 375.967559] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 375.979675] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 375.984985] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 375.994354] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 376.003906] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 376.013031] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 376.022216] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 376.031494] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 376.040863] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 376.049285] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 376.058074] ---[ end trace da227214a82491ca ]---
- <6>[ 376.062194] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 376.069122] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 376.081512] ------------[ cut here ]------------
- <4>[ 376.086090] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 376.098175] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 376.103332] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 376.112731] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 376.122314] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 376.131500] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 376.140777] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 376.150177] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 376.159393] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 376.167877] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 376.176208] ---[ end trace da227214a82491cb ]---
- <6>[ 376.180725] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 376.187744] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 376.201416] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 376.212036] mmcblk0: error -110 sending status command, retrying
- <3>[ 376.222625] mmcblk0: error -110 sending status command, retrying
- <3>[ 376.233123] mmcblk0: error -110 sending status command, aborting
- <3>[ 376.238159] end_request: I/O error, dev mmcblk0, sector 60424000
- <3>[ 376.244201] Buffer I/O error on device mmcblk0p31, logical block 55324416
- <3>[ 376.250885] end_request: I/O error, dev mmcblk0, sector 60424001
- <3>[ 376.256958] Buffer I/O error on device mmcblk0p31, logical block 55324417
- <3>[ 376.263671] end_request: I/O error, dev mmcblk0, sector 60424002
- <3>[ 376.269714] end_request: I/O error, dev mmcblk0, sector 60424003
- <3>[ 376.275665] end_request: I/O error, dev mmcblk0, sector 60424004
- <3>[ 376.281677] end_request: I/O error, dev mmcblk0, sector 60424005
- <3>[ 376.287689] end_request: I/O error, dev mmcblk0, sector 60424006
- <3>[ 376.293640] end_request: I/O error, dev mmcblk0, sector 60424007
- <4>[ 376.299682] ------------[ cut here ]------------
- <4>[ 376.304229] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 376.316345] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 376.321624] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 376.330963] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 376.340545] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 376.349761] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 376.358886] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 376.368164] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 376.377532] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 376.385894] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 376.394287] ---[ end trace da227214a82491cc ]---
- <6>[ 376.398803] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 376.405822] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 376.418182] ------------[ cut here ]------------
- <4>[ 376.422729] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 376.435302] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 376.439971] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 376.449401] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 376.458984] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 376.468170] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 376.477386] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 376.486846] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <6>[ 376.486938] mtp_open
- <4>[ 376.498229] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 376.506713] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 376.515045] ---[ end trace da227214a82491cd ]---
- <6>[ 376.519561] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 376.526580] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 376.540283] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 376.550811] mmcblk0: error -110 sending status command, retrying
- <3>[ 376.561492] mmcblk0: error -110 sending status command, retrying
- <3>[ 376.571929] mmcblk0: error -110 sending status command, aborting
- <3>[ 376.577026] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 376.582916] EXT4-fs (mmcblk0p31): unable to read superblock
- <4>[ 376.588409] ------------[ cut here ]------------
- <4>[ 376.593017] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 376.605194] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 376.610382] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 376.619812] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 376.629364] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 376.638519] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 376.647613] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 376.656982] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 376.666351] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 376.674774] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 376.683013] ---[ end trace da227214a82491ce ]---
- <6>[ 376.687683] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 376.694580] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <4>[ 385.673370] ------------[ cut here ]------------
- <4>[ 385.677001] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3511 msmsdcc_enable+0x108/0x148()
- <4>[ 385.689208] mmc0: msmsdcc_enable: failed with error -22
- <4>[ 385.694335] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 385.703674] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 385.713287] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cf38>] (msmsdcc_enable+0x108/0x148)
- <4>[ 385.722442] [<c055cf38>] (msmsdcc_enable+0x108/0x148) from [<c05482b4>] (__mmc_claim_host+0x168/0x178)
- <4>[ 385.731781] [<c05482b4>] (__mmc_claim_host+0x168/0x178) from [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc)
- <4>[ 385.741149] [<c0556474>] (mmc_blk_issue_rq+0x30/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 385.750427] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 385.758789] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 385.767181] ---[ end trace da227214a82491cf ]---
- <6>[ 385.771697] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 385.778717] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <6>[ 385.792388] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <3>[ 385.803009] mmcblk0: error -110 sending status command, retrying
- <3>[ 385.813629] mmcblk0: error -110 sending status command, retrying
- <3>[ 385.824127] mmcblk0: error -110 sending status command, aborting
- <3>[ 385.829162] end_request: I/O error, dev mmcblk0, sector 5099586
- <3>[ 385.835144] EXT4-fs (mmcblk0p31): unable to read superblock
- <4>[ 385.840606] ------------[ cut here ]------------
- <4>[ 385.845275] WARNING: at /home/jenkins/workspace/TWRP/kernel/qcom/msm8960/drivers/mmc/host/msm_sdcc.c:3539 msmsdcc_disable+0x84/0x120()
- <4>[ 385.857330] mmc0: msmsdcc_disable: failed with error -22
- <4>[ 385.862579] [<c0012f08>] (unwind_backtrace+0x0/0xe0) from [<c0070d04>] (warn_slowpath_common+0x48/0x60)
- <4>[ 385.872009] [<c0070d04>] (warn_slowpath_common+0x48/0x60) from [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 385.881561] [<c0070d74>] (warn_slowpath_fmt+0x2c/0x3c) from [<c055cd94>] (msmsdcc_disable+0x84/0x120)
- <4>[ 385.890777] [<c055cd94>] (msmsdcc_disable+0x84/0x120) from [<c05483b0>] (mmc_release_host+0x44/0xa8)
- <4>[ 385.899871] [<c05483b0>] (mmc_release_host+0x44/0xa8) from [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc)
- <4>[ 385.909118] [<c0556804>] (mmc_blk_issue_rq+0x3c0/0x3fc) from [<c0557824>] (mmc_queue_thread+0xa8/0x124)
- <4>[ 385.918548] [<c0557824>] (mmc_queue_thread+0xa8/0x124) from [<c008d300>] (kthread+0x84/0x90)
- <4>[ 385.926971] [<c008d300>] (kthread+0x84/0x90) from [<c000e6d0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 385.935302] ---[ end trace da227214a82491d0 ]---
- <6>[ 385.939819] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
- <6>[ 385.946838] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
- <5>[ 427.853637] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 427.859252] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 427.864318] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 427.869171] bq27541_get_psp voltage_now= 4238000 uV
- <5>[ 427.874084] bq27541_get_capacity = 100% ret= 100
- <5>[ 427.878631] bq27541_get_psp temperature= 211 (0.1�XC)
- <5>[ 427.884552] bq27541_get_psp current = -150 mA
- <5>[ 427.963562] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 427.971069] smb345_charger: [smb345_config_thermal_charging] temp=20, volt=4239000
- <5>[ 427.978881] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 427.986480] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 488.173645] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 488.179260] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 488.184295] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 488.189178] bq27541_get_psp voltage_now= 4238000 uV
- <5>[ 488.194030] bq27541_get_capacity = 100% ret= 100
- <5>[ 488.198669] bq27541_get_psp temperature= 212 (0.1�XC)
- <5>[ 488.204528] bq27541_get_psp current = -150 mA
- <5>[ 488.283569] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 488.290985] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4238000
- <5>[ 488.298919] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 488.306488] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 548.333648] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 548.339324] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 548.344238] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 548.349212] bq27541_get_psp voltage_now= 4235000 uV
- <5>[ 548.354034] bq27541_get_capacity = 100% ret= 100
- <5>[ 548.358673] bq27541_get_psp temperature= 214 (0.1�XC)
- <5>[ 548.364471] bq27541_get_psp current = -167 mA
- <5>[ 548.443511] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 548.450988] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4238000
- <5>[ 548.458892] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 548.466430] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 608.493499] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 608.499176] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 608.504119] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 608.509094] bq27541_get_psp voltage_now= 4236000 uV
- <5>[ 608.513885] bq27541_get_capacity = 100% ret= 100
- <5>[ 608.518493] bq27541_get_psp temperature= 216 (0.1�XC)
- <5>[ 608.524414] bq27541_get_psp current = -148 mA
- <5>[ 608.603363] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 608.610870] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4235000
- <5>[ 608.618743] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 608.626251] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 649.884033] bq27541_get_capacity = 100% ret= 100
- <5>[ 649.888580] bq27541_get_psp status: Full ret= 0x0201
- <4>[ 649.892944] audit_printk_skb: 12 callbacks suppressed
- <5>[ 649.897674] type=1400 audit(1573545644.269:33): avc: denied { create } for pid=150 comm="recovery" name="orsin" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 649.915557] type=1400 audit(1573545644.309:34): avc: denied { read } for pid=150 comm="recovery" name="orsin" dev="rootfs" ino=9330 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 649.934967] type=1400 audit(1573545644.329:35): avc: denied { open } for pid=150 comm="recovery" name="orsin" dev="rootfs" ino=9330 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 649.954925] type=1400 audit(1573545644.349:36): avc: denied { read } for pid=150 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
- <5>[ 668.653533] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 668.659179] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 668.664215] bq27541_get_psp status: Full ret= 0x0201
- <5>[ 668.669067] bq27541_get_psp voltage_now= 4235000 uV
- <5>[ 668.673980] bq27541_get_capacity = 100% ret= 100
- <5>[ 668.678527] bq27541_get_psp temperature= 217 (0.1�XC)
- <5>[ 668.684448] bq27541_get_psp current = -147 mA
- <5>[ 668.763488] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 668.770965] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4236000
- <5>[ 668.778808] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 668.786407] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 710.809112] bq27541_get_capacity = 100% ret= 100
- <5>[ 710.813690] bq27541_get_psp status: Full ret= 0x0201
- <6>[ 711.833160] mipi_JDI_set_backlight: pwm disable
- <6>[ 711.841217] mipi_JDI_lcd_off+
- <6>[ 711.841217] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing
- <4>[ 711.841247] mipi_dsi_panel_power+, on=0
- <6>[ 711.841247] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <5>[ 728.813781] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 728.823974] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 728.843688] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 728.848541] bq27541_get_psp voltage_now= 4286000 uV
- <5>[ 728.853393] bq27541_get_capacity = 100% ret= 100
- <5>[ 728.858062] bq27541_get_psp temperature= 219 (0.1�XC)
- <5>[ 728.863861] bq27541_get_psp current = 284 mA
- <5>[ 728.923278] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 728.930725] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4235000
- <5>[ 728.938659] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 728.946228] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 788.973510] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 788.979187] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 788.984100] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 788.989074] bq27541_get_psp voltage_now= 4295000 uV
- <5>[ 788.993896] bq27541_get_capacity = 100% ret= 100
- <5>[ 788.998535] bq27541_get_psp temperature= 219 (0.1�XC)
- <5>[ 789.004333] bq27541_get_psp current = 259 mA
- <5>[ 789.083374] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 789.090850] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4286000
- <5>[ 789.098724] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 789.106292] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <5>[ 849.133636] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 849.139312] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 849.144226] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 849.149200] bq27541_get_psp voltage_now= 4299000 uV
- <5>[ 849.154022] bq27541_get_capacity = 100% ret= 100
- <5>[ 849.158630] bq27541_get_psp temperature= 218 (0.1�XC)
- <5>[ 849.164550] bq27541_get_psp current = 243 mA
- <5>[ 849.243499] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
- <5>[ 849.251007] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4295000
- <5>[ 849.258880] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 849.266387] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
- <6>[ 869.373168] gpio_keys: Pressed KEY_POWER
- <6>[ 869.513122] gpio_keys: Released KEY_POWER
- <4>[ 869.516296] mipi_dsi_panel_power+, on=1
- <6>[ 869.516296] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
- <6>[ 869.521881] mipi_JDI_lcd_on+
- <6>[ 869.521881] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing
- <5>[ 869.557342] bq27541_get_capacity = 100% ret= 100
- <5>[ 869.561981] bq27541_get_psp status: Full ret= 0x0200
- <6>[ 869.793121] mipi_JDI_set_backlight: pwm enable
- <5>[ 875.310211] type=1400 audit(1573545869.699:37): avc: denied { create } for pid=167 comm="recovery" name="twadbfifo" scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 875.310272] type=1400 audit(1573545869.699:38): avc: denied { remove_name } for pid=150 comm="recovery" name="orsin" dev="rootfs" ino=9330 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 875.310302] type=1400 audit(1573545869.699:39): avc: denied { unlink } for pid=150 comm="recovery" name="orsin" dev="rootfs" ino=9330 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 875.366638] type=1400 audit(1573545869.749:40): avc: denied { read } for pid=167 comm="recovery" name="twadbfifo" dev="tmpfs" ino=7462 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 875.386230] type=1400 audit(1573545869.769:41): avc: denied { open } for pid=167 comm="recovery" name="twadbfifo" dev="tmpfs" ino=7462 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 877.076873] smb345_charger: [smb345_inok_isr] VBUS_DET = H
- <6>[ 885.813598] notifying plugin
- <6>[ 885.816925] msm_otg msm_otg: USB exited from low power mode
- <5>[ 885.821533] smb345_charger: [usb_cable_type_detect] INOK=H
- <5>[ 885.827087] smb345_charger: [usb_cable_type_detect] enable wpc_pok, enable DCIN
- <4>[ 885.834350] ========================================================
- <4>[ 885.840606] bq27541_battery_callback usb_cable_state = 0
- <4>[ 885.846069] ========================================================
- <6>[ 885.852325] battery_callback cable_wake_lock 5 sec...
- <6>[ 885.852325]
- <6>[ 885.858795] elan-ktf3k 3-0010: Update power source to 0
- <6>[ 885.864379] The USB cable status = CHARGER_NONE
- <3>[ 885.868713] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
- <6>[ 885.875000] msm_otg msm_otg: Avail curr from USB = 0
- <6>[ 885.880004] msm_otg msm_otg: phy_reset: success
- <6>[ 885.994964] msm_otg msm_otg: USB in low power mode
- <5>[ 887.854064] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 887.859649] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 887.865264] bq27541_get_psp voltage_now= 4207000 uV
- <5>[ 887.870147] bq27541_get_capacity = 100% ret= 100
- <5>[ 887.874725] bq27541_get_psp temperature= 217 (0.1�XC)
- <5>[ 887.880615] bq27541_get_psp current = -541 mA
- <5>[ 929.814117] bq27541_get_capacity = 100% ret= 100
- <5>[ 929.818695] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 945.663238] smb345_charger: [smb345_inok_isr] VBUS_DET = L
- <6>[ 947.853332] notifying plugin
- <6>[ 947.857696] msm_otg msm_otg: USB exited from low power mode
- <5>[ 948.013854] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 948.019165] bq27541_get_psp status: Not charging ret= 0x0201
- <5>[ 948.024841] bq27541_get_psp voltage_now= 4185000 uV
- <5>[ 948.029632] bq27541_get_capacity = 100% ret= 100
- <6>[ 948.033264] msm_otg msm_otg: chg_type = USB_CDP_CHARGER
- <5>[ 948.033264] smb345_charger: [usb_cable_type_detect] INOK=L
- <5>[ 948.033264] smb345_charger: [usb_cable_type_detect] Cable: CDP
- <5>[ 948.033905] smb345_charger: [smb345_set_InputCurrentlimit] Disable AICL, retval=93 setting=83
- <5>[ 948.034149] smb345_charger: [smb345_set_InputCurrentlimit] Set ICL=1200 retval =21 setting=24
- <5>[ 948.034423] smb345_charger: [smb345_set_InputCurrentlimit] Re-enable AICL, setting=93
- <5>[ 948.064086] smb345_charger: [smb345_vflt_setting] Set Float Volt, retval=ea setting=e8
- <4>[ 948.064453] ========================================================
- <4>[ 948.064453] bq27541_battery_callback usb_cable_state = 3
- <4>[ 948.064453] ========================================================
- <6>[ 948.064483] battery_callback cable_wake_lock 5 sec...
- <6>[ 948.064483]
- <6>[ 948.064483] elan-ktf3k 3-0010: Update power source to 1
- <5>[ 948.064697] smb345_charger: [usb_cable_type_detect] AC cable detect, disable wpc_pok, disable DCIN
- <5>[ 948.122100] bq27541_get_psp temperature= 218 (0.1�XC)
- <5>[ 948.127807] bq27541_get_psp current = -254 mA
- <6>[ 948.265106] The USB cable status = CHARGER_CDP
- <3>[ 948.268585] msm_otg msm_otg: Failed notifying 3 charger type to PMIC
- <6>[ 948.274963] msm_otg msm_otg: Avail curr from USB = 1500
- <6>[ 948.284362] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- <6>[ 948.408142] android_work: android_work: did not send uevent (0 0 (null))
- <6>[ 948.494903] android_work: android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 948.593200] android_usb gadget: high-speed config #1: android_usb
- <6>[ 948.653289] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <5>[ 950.063323] smb345_charger: [reconfig_AICL] Status Reg E=0x94
- <5>[ 950.083465] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 950.088012] bq27541_get_psp status: Full ret= 0x0200
- <5>[ 950.092956] bq27541_get_psp voltage_now= 4217000 uV
- <5>[ 950.097869] bq27541_get_capacity = 100% ret= 100
- <5>[ 950.102416] bq27541_get_psp temperature= 218 (0.1�XC)
- <5>[ 950.108062] bq27541_get_psp current = 219 mA
- <5>[ 950.170257] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73
- <5>[ 950.178588] smb345_charger: [smb345_config_thermal_charging] temp=21, volt=4185000
- <5>[ 950.186126] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8
- <5>[ 950.193817] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement