Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.6-2.10-omap2plus (abuild@build10) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #2 SMP Thu Nov 1 18:16:28 UTC 2012
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] cma: CMA: reserved 32 MiB at 9e000000
- [ 0.000000] cma: CMA: reserved 16 MiB at 9c800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 129280
- [ 0.000000] free_area_init_node: node 0, pgdat c0848280, node_mem_map c08bf000
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 128256 pages, LIFO batch:31
- [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- [ 0.000000] omap_sr_enable: omap_sr struct for sr_core not found
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0cc3000 s12160 r8192 d12416 u32768
- [ 0.000000] pcpu-alloc: s12160 r8192 d12416 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128256
- [ 0.000000] Kernel command line: root=/dev/disk/by-id/mmc-SD16G_0x7cadc505-part2 loader=uboot disk=/dev/disk/by-id/mmc-SD16G_0x7cadc505 resume=/dev/disk/by-id/mmc-SD16G_0x7cadc505-part3 vram=16M
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 1048576 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 473MB 32MB = 505MB total
- [ 0.000000] Memory: 441184k/441184k available, 83104k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc076c120 (7569 kB)
- [ 0.000000] .init : 0xc076d000 - 0xc07c5f80 ( 356 kB)
- [ 0.000000] .data : 0xc07c6000 - 0xc0854ac8 ( 571 kB)
- [ 0.000000] .bss : 0xc0854aec - 0xc08be3d0 ( 423 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:474
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] omap_sr_enable: omap_sr struct for sr_mpu_iva not found
- [ 0.000000] omap_sr_disable: omap_sr struct for sr_mpu_iva not found
- [ 0.000000] omap_sr_enable: omap_sr struct for sr_wakeup not found
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000823] Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080)
- [ 0.032989] pid_max: default: 32768 minimum: 301
- [ 0.033203] Security Framework initialized
- [ 0.033294] AppArmor: AppArmor initialized
- [ 0.033386] Mount-cache hash table entries: 512
- [ 0.034667] Initializing cgroup subsys cpuacct
- [ 0.034698] Initializing cgroup subsys memory
- [ 0.034759] Initializing cgroup subsys devices
- [ 0.034790] Initializing cgroup subsys freezer
- [ 0.034820] Initializing cgroup subsys net_cls
- [ 0.034851] Initializing cgroup subsys blkio
- [ 0.034881] Initializing cgroup subsys perf_event
- [ 0.035003] CPU: Testing write buffer coherency: ok
- [ 0.035308] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.035400] Setting up static identity map for 0x80535fa0 - 0x80535ff8
- [ 0.036102] Brought up 1 CPUs
- [ 0.036163] SMP: Total of 1 processors activated (503.12 BogoMIPS).
- [ 0.037231] devtmpfs: initialized
- [ 0.062042] dummy:
- [ 0.065246] NET: Registered protocol family 16
- [ 0.067871] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.068176] GPMC revision 5.0
- [ 0.069641] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
- [ 0.069763] OMAP GPIO hardware version 2.5
- [ 0.069976] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
- [ 0.070251] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
- [ 0.070495] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
- [ 0.070770] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
- [ 0.071014] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
- [ 0.071716] omap_mux_init: Add partition: #1: core, flags: 0
- [ 0.072906] OMAP3 Beagle Rev: xM C
- [ 0.075347] Reprogramming SDRC clock to 332000000 Hz
- [ 0.077392] usbhs_omap: alias fck already exists
- [ 0.077514] Found NAND on CS0
- [ 0.077545] Registering NAND on CS0
- [ 0.077850] gpio_request: gpio--22 (DVI reset) status -22
- [ 0.077850] Unable to get DVI reset GPIO
- [ 0.078033] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.080902] omap-mcbsp.2: alias fck already exists
- [ 0.081115] omap-mcbsp.3: alias fck already exists
- [ 0.082092] OMAP DMA hardware revision 5.0
- [ 0.088439] bio: create slab <bio-0> at 0
- [ 0.089965] SCSI subsystem initialized
- [ 0.090484] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
- [ 0.090942] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
- [ 0.091308] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
- [ 0.091705] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
- [ 0.092132] usbcore: registered new interface driver usbfs
- [ 0.092346] usbcore: registered new interface driver hub
- [ 0.092559] usbcore: registered new device driver usb
- [ 0.105468] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
- [ 0.108184] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
- [ 0.108367] twl 1-0048: power (irq 325) chaining IRQs 328..335
- [ 0.109039] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
- [ 0.109375] gpiochip_add: registered GPIOs 192 to 211 on device: twl4030
- [ 0.110870] VUSB1V5: 1500 mV normal standby
- [ 0.111328] VUSB1V8: 1800 mV normal standby
- [ 0.111724] VUSB3V1: 3100 mV normal standby
- [ 0.112640] vdd_mpu_iva: 600 <--> 1450 mV normal
- [ 0.113067] vdd_core: 600 <--> 1450 mV normal
- [ 0.113586] VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- [ 0.114074] VDAC: 1800 mV normal standby
- [ 0.114593] VDVI: 1800 mV normal standby
- [ 0.115234] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.115722] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
- [ 0.117004] omap-iommu omap-iommu.0: isp registered
- [ 0.117828] NetLabel: Initializing
- [ 0.117858] NetLabel: domain hash size = 128
- [ 0.117889] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.117950] NetLabel: unlabeled traffic allowed by default
- [ 0.118103] Switching to clocksource 32k_counter
- [ 0.136962] AppArmor: AppArmor Filesystem Enabled
- [ 0.149017] usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
- [ 0.149078] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
- [ 0.150024] NET: Registered protocol family 2
- [ 0.150421] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.151123] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.151519] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.151885] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.151916] TCP: reno registered
- [ 0.151916] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.151977] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.152374] NET: Registered protocol family 1
- [ 0.152679] Unpacking initramfs...
- [ 1.231872] Freeing initrd memory: 12160K
- [ 1.232025] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 1.232391] omap_dsp_init: 600000 bytes @ 9da00000
- [ 1.234497] audit: initializing netlink socket (disabled)
- [ 1.234588] type=2000 audit(1.242:1): initialized
- [ 1.413818] VFS: Disk quotas dquot_6.5.2
- [ 1.414123] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.414886] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 1.415435] msgmni has been set to 981
- [ 1.416778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.416992] io scheduler noop registered
- [ 1.417022] io scheduler deadline registered
- [ 1.417114] io scheduler cfq registered (default)
- [ 1.418426] OMAP DSS rev 2.0
- [ 1.513488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.515167] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- [ 1.515747] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- [ 1.516235] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- [ 1.516845] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- [ 1.517425] [drm] Initialized drm 1.1.0 20060810
- [ 1.518920] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 1.519317] No NAND device found
- [ 1.519561] No NAND device found
- [ 1.519683] OneNAND driver initializing
- [ 1.520874] usbcore: registered new interface driver asix
- [ 1.520996] usbcore: registered new interface driver cdc_ether
- [ 1.521087] usbcore: registered new interface driver smsc95xx
- [ 1.521179] usbcore: registered new interface driver net1080
- [ 1.521240] usbcore: registered new interface driver cdc_subset
- [ 1.521331] usbcore: registered new interface driver zaurus
- [ 1.521423] usbcore: registered new interface driver cdc_ncm
- [ 1.521789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.521850] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
- [ 1.522033] ehci-omap ehci-omap.0: failed to get ehci port0 regulator
- [ 1.522064] ehci-omap ehci-omap.0: failed to get ehci port1 regulator
- [ 2.524536] ehci-omap ehci-omap.0: phy reset operation timed out
- [ 3.532348] ehci-omap ehci-omap.0: phy reset operation timed out
- [ 3.532379] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- [ 3.532379] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
- [ 3.532409] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 3.532440] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 3.532623] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file 'devices'
- [ 3.532653] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '001'
- [ 3.533142] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 3.533813] ehci-omap ehci-omap.0: park 0
- [ 3.533905] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- [ 3.533966] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 3.548004] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 3.548217] usb usb1: default language 0x0409
- [ 3.548278] usb usb1: udev 1, busnum 1, minor = 0
- [ 3.548278] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.548339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.548370] usb usb1: Product: OMAP-EHCI Host Controller
- [ 3.548370] usb usb1: Manufacturer: Linux 3.4.6-2.10-omap2plus ehci_hcd
- [ 3.548400] usb usb1: SerialNumber: ehci-omap.0
- [ 3.548950] usb usb1: usb_probe_device
- [ 3.548980] usb usb1: configuration #1 chosen from 1 choice
- [ 3.549041] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 3.549224] hub 1-0:1.0: usb_probe_interface
- [ 3.549255] hub 1-0:1.0: usb_probe_interface - got id
- [ 3.549255] hub 1-0:1.0: USB hub found
- [ 3.549316] hub 1-0:1.0: 3 ports detected
- [ 3.549346] hub 1-0:1.0: standalone hub
- [ 3.549346] hub 1-0:1.0: individual port power switching
- [ 3.549377] hub 1-0:1.0: individual port over-current protection
- [ 3.549377] hub 1-0:1.0: power on to power good time: 20ms
- [ 3.549407] hub 1-0:1.0: local power source is good
- [ 3.549438] hub 1-0:1.0: enabling power on all ports
- [ 3.549804] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '001'
- [ 3.549957] ehci-omap ehci-omap.0: ...powerup ports...
- [ 3.579406] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.579467] ohci_hcd: block sizes: ed 64 td 64
- [ 3.579681] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
- [ 3.579742] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '002'
- [ 3.580047] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
- [ 3.580108] ohci-omap3 ohci-omap3.0: starting OHCI controller
- [ 3.580596] ohci-omap3 ohci-omap3.0: created debug files
- [ 3.580627] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
- [ 3.658691] ohci-omap3 ohci-omap3.0: OHCI controller state
- [ 3.658691] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 3.658721] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 3.658752] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
- [ 3.658752] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
- [ 3.658782] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 3.658813] ohci-omap3 ohci-omap3.0: hcca frame #0012
- [ 3.658813] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
- [ 3.658843] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 3.658874] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
- [ 3.658874] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
- [ 3.658905] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
- [ 3.658935] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
- [ 3.658996] usb usb2: default language 0x0409
- [ 3.659027] usb usb2: udev 1, busnum 2, minor = 128
- [ 3.659057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.659088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.659118] usb usb2: Product: OMAP3 OHCI Host Controller
- [ 3.659149] usb usb2: Manufacturer: Linux 3.4.6-2.10-omap2plus ohci_hcd
- [ 3.659179] usb usb2: SerialNumber: ohci-omap3.0
- [ 3.659332] ehci-omap ehci-omap.0: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 3.659332] hub 1-0:1.0: port 2: status 0501 change 0001
- [ 3.659820] usb usb2: usb_probe_device
- [ 3.659820] usb usb2: configuration #1 chosen from 1 choice
- [ 3.659881] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 3.660003] hub 2-0:1.0: usb_probe_interface
- [ 3.660034] hub 2-0:1.0: usb_probe_interface - got id
- [ 3.660034] hub 2-0:1.0: USB hub found
- [ 3.660095] hub 2-0:1.0: 3 ports detected
- [ 3.660125] hub 2-0:1.0: standalone hub
- [ 3.660156] hub 2-0:1.0: no power switching (usb 1.0)
- [ 3.660156] hub 2-0:1.0: global over-current protection
- [ 3.660186] hub 2-0:1.0: power on to power good time: 20ms
- [ 3.660186] hub 2-0:1.0: local power source is good
- [ 3.660217] hub 2-0:1.0: no over-current condition exists
- [ 3.660217] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 3.660583] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '001'
- [ 3.660766] Initializing USB Mass Storage driver...
- [ 3.660949] usbcore: registered new interface driver usb-storage
- [ 3.660980] USB Mass Storage support registered.
- [ 3.661102] usbcore: registered new interface driver libusual
- [ 3.661285] usbcore: registered new interface driver usbserial
- [ 3.661315] usbserial: USB Serial Driver core
- [ 3.661437] usbcore: registered new interface driver usbtest
- [ 3.661865] mousedev: PS/2 mouse device common for all mice
- [ 3.663360] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
- [ 3.664031] twl_rtc twl_rtc: Power up reset detected.
- [ 3.664184] twl_rtc twl_rtc: Enabling TWL-RTC
- [ 3.666442] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 3.667053] i2c /dev entries driver
- [ 3.667541] Driver for 1-wire Dallas network protocol.
- [ 3.668395] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 3.668914] cpuidle: using governor ladder
- [ 3.668945] cpuidle: using governor menu
- [ 3.759033] hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
- [ 3.759063] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 3.821502] ehci-omap ehci-omap.0: port 2 high speed
- [ 3.821563] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 3.883972] usb 1-2: new high-speed USB device number 2 using ehci-omap
- [ 3.886108] Registered led device: beagleboard::usr0
- [ 3.886230] Registered led device: beagleboard::usr1
- [ 3.888214] Registered led device: beagleboard::pmu_stat
- [ 3.889160] usbcore: registered new interface driver usbhid
- [ 3.889221] usbhid: USB HID core driver
- [ 3.889801] TCP: cubic registered
- [ 3.890014] NET: Registered protocol family 10
- [ 3.891143] Registering the dns_resolver key type
- [ 3.891357] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 3.891418] ThumbEE CPU extension supported.
- [ 3.891479] Registering SWP/SWPB emulation handler
- [ 3.897155] sr_init: No PMIC hook to init smartreflex
- [ 3.897430] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 3.897674] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 3.897827] SmartReflex Class3 initialized
- [ 3.905029] omap_sr_disable: omap_sr struct for sr_wakeup not found
- [ 3.905120] clock: disabling unused clocks to save power
- [ 3.906280] registered taskstats version 1
- [ 3.907196] VDVI: incomplete constraints, leaving on
- [ 3.907501] VDAC: incomplete constraints, leaving on
- [ 3.907775] VUSB3V1: incomplete constraints, leaving on
- [ 3.907989] VUSB1V8: incomplete constraints, leaving on
- [ 3.908233] VUSB1V5: incomplete constraints, leaving on
- [ 3.909210] input: gpio-keys as /devices/platform/gpio-keys/input/input1
- [ 3.910736] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
- [ 3.912017] omapdrm omapdrm.0: DMM not available, disable DMM support
- [ 3.968841] Console: switching to colour frame buffer device 160x64
- [ 3.994323] fb0: omapdrm frame buffer device
- [ 3.994506] drm: registered panic notifier
- [ 3.994659] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 3.994903] [drm] No driver support for vblank timestamp query.
- [ 3.995117] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
- [ 3.996490] Freeing init memory: 352K
- [ 3.997436] ehci-omap ehci-omap.0: port 2 high speed
- [ 3.997497] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 4.088104] usb 1-2: udev 2, busnum 1, minor = 1
- [ 4.088134] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
- [ 4.088745] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.090148] usb 1-2: usb_probe_device
- [ 4.090209] usb 1-2: configuration #1 chosen from 1 choice
- [ 4.090606] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
- [ 4.090911] hub 1-2:1.0: usb_probe_interface
- [ 4.090942] hub 1-2:1.0: usb_probe_interface - got id
- [ 4.090972] hub 1-2:1.0: USB hub found
- [ 4.095184] hub 1-2:1.0: 5 ports detected
- [ 4.095550] hub 1-2:1.0: compound device; port removable status: FRRRR
- [ 4.095581] hub 1-2:1.0: individual port power switching
- [ 4.095611] hub 1-2:1.0: individual port over-current protection
- [ 4.096221] hub 1-2:1.0: TT per port
- [ 4.096252] hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 4.096282] hub 1-2:1.0: power on to power good time: 100ms
- [ 4.096771] hub 1-2:1.0: local power source is good
- [ 4.096832] hub 1-2:1.0: enabling power on all ports
- [ 4.098175] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '002'
- [ 4.098480] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
- [ 4.197113] hub 1-2:1.0: port 1: status 0101 change 0001
- [ 4.197509] hub 1-2:1.0: port 2: status 0101 change 0001
- [ 4.198150] hub 1-2:1.0: port 5: status 0101 change 0001
- [ 4.241516] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 4.244293] mmc0: new high speed SDHC card at address 0007
- [ 4.251556] mmcblk0: mmc0:0007 SD16G 14.5 GiB
- [ 4.256195] mmcblk0: p1 p2 p3
- [ 4.298797] usb 1-2: link qh256-0001/c1d22580 start 1 [1/0 us]
- [ 4.298889] hub 1-2:1.0: state 7 ports 5 chg 0026 evt 0000
- [ 4.299133] hub 1-2:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 4.385437] usb 1-2.1: new high-speed USB device number 3 using ehci-omap
- [ 4.502105] usb 1-2.1: udev 3, busnum 1, minor = 2
- [ 4.502136] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 4.502380] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.503051] usb 1-2.1: usb_probe_device
- [ 4.503082] usb 1-2.1: configuration #1 chosen from 1 choice
- [ 4.505645] usb 1-2.1: adding 1-2.1:1.0 (config #1, interface 0)
- [ 4.505798] smsc95xx 1-2.1:1.0: usb_probe_interface
- [ 4.505798] smsc95xx 1-2.1:1.0: usb_probe_interface - got id
- [ 4.505889] smsc95xx v1.0.4
- [ 4.597778] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 66:07:05:a6:4a:48
- [ 4.598480] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '003'
- [ 4.599151] hub 1-2:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 4.681579] usb 1-2.2: new high-speed USB device number 4 using ehci-omap
- [ 4.806579] usb 1-2.2: default language 0x0409
- [ 4.812683] usb 1-2.2: udev 4, busnum 1, minor = 3
- [ 4.812713] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=2838
- [ 4.812988] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.813232] usb 1-2.2: Product: RTL2838UHIDIR
- [ 4.813415] usb 1-2.2: Manufacturer: Realtek
- [ 4.822509] usb 1-2.2: SerialNumber: 00000013
- [ 4.831787] usb 1-2.2: usb_probe_device
- [ 4.831817] usb 1-2.2: configuration #1 chosen from 1 choice
- [ 4.835937] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
- [ 4.838378] usbtest 1-2.2:1.0: usb_probe_interface
- [ 4.838378] usbtest 1-2.2:1.0: usb_probe_interface - got id
- [ 4.838531] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
- [ 4.840820] usbtest 1-2.2:1.1: usb_probe_interface
- [ 4.840850] usbtest 1-2.2:1.1: usb_probe_interface - got id
- [ 4.841125] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '004'
- [ 4.841583] hub 1-2:1.0: port 5, status 0101, change 0000, 12 Mb/s
- [ 4.923706] usb 1-2.5: new high-speed USB device number 5 using ehci-omap
- [ 5.057342] usb 1-2.5: udev 5, busnum 1, minor = 4
- [ 5.057373] usb 1-2.5: New USB device found, idVendor=0409, idProduct=005a
- [ 5.075164] usb 1-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5.093841] usb 1-2.5: usb_probe_device
- [ 5.093872] usb 1-2.5: configuration #1 chosen from 1 choice
- [ 5.094390] usb 1-2.5: adding 1-2.5:1.0 (config #1, interface 0)
- [ 5.094696] hub 1-2.5:1.0: usb_probe_interface
- [ 5.094757] hub 1-2.5:1.0: usb_probe_interface - got id
- [ 5.094848] hub 1-2.5:1.0: USB hub found
- [ 5.113067] hub 1-2.5:1.0: 4 ports detected
- [ 5.130889] hub 1-2.5:1.0: standalone hub
- [ 5.130920] hub 1-2.5:1.0: ganged power switching
- [ 5.130950] hub 1-2.5:1.0: global over-current protection
- [ 5.130981] hub 1-2.5:1.0: Single TT
- [ 5.130981] hub 1-2.5:1.0: TT requires at most 16 FS bit times (1332 ns)
- [ 5.131011] hub 1-2.5:1.0: Port indicators are supported
- [ 5.131042] hub 1-2.5:1.0: power on to power good time: 0ms
- [ 5.131591] hub 1-2.5:1.0: local power source is good
- [ 5.131622] hub 1-2.5:1.0: no over-current condition exists
- [ 5.131652] hub 1-2.5:1.0: enabling power on all ports
- [ 5.133697] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '005'
- [ 5.229339] hub 1-2.5:1.0: port 4: status 0301 change 0001
- [ 5.329589] usb 1-2.5: link qh256-0001/c1d89d00 start 2 [1/0 us]
- [ 5.329681] hub 1-2.5:1.0: state 7 ports 4 chg 0010 evt 0000
- [ 5.330108] hub 1-2.5:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
- [ 5.416168] usb 1-2.5.4: new low-speed USB device number 6 using ehci-omap
- [ 5.602111] usb 1-2.5.4: skipped 1 descriptor after interface
- [ 5.602142] usb 1-2.5.4: skipped 1 descriptor after interface
- [ 5.602172] usb 1-2.5.4: skipped 1 descriptor after interface
- [ 5.605651] usb 1-2.5.4: default language 0x0409
- [ 5.638397] usb 1-2.5.4: udev 6, busnum 1, minor = 5
- [ 5.638427] usb 1-2.5.4: New USB device found, idVendor=046d, idProduct=c318
- [ 5.656280] usb 1-2.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.674041] usb 1-2.5.4: Product: Logitech Illuminated Keyboard
- [ 5.691772] usb 1-2.5.4: Manufacturer: Logitech
- [ 5.710510] usb 1-2.5.4: usb_probe_device
- [ 5.710540] usb 1-2.5.4: configuration #1 chosen from 1 choice
- [ 5.724151] usb 1-2.5.4: adding 1-2.5.4:1.0 (config #1, interface 0)
- [ 5.724639] usbtest 1-2.5.4:1.0: usb_probe_interface
- [ 5.724670] usbtest 1-2.5.4:1.0: usb_probe_interface - got id
- [ 5.724761] usbhid 1-2.5.4:1.0: usb_probe_interface
- [ 5.724792] usbhid 1-2.5.4:1.0: usb_probe_interface - got id
- [ 5.755462] input: Logitech Logitech Illuminated Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.5/1-2.5.4/1-2.5.4:1.0/input/input2
- [ 5.774566] usb 1-2.5.4: link qh8-0e01/c1d89a00 start 3 [1/2 us]
- [ 5.775238] generic-usb 0003:046D:C318.0001: input: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-ehci-omap.0-2.5.4/input0
- [ 5.794677] usb 1-2.5.4: adding 1-2.5.4:1.1 (config #1, interface 1)
- [ 5.795135] usbtest 1-2.5.4:1.1: usb_probe_interface
- [ 5.795166] usbtest 1-2.5.4:1.1: usb_probe_interface - got id
- [ 5.795257] usbhid 1-2.5.4:1.1: usb_probe_interface
- [ 5.795288] usbhid 1-2.5.4:1.1: usb_probe_interface - got id
- [ 5.830078] input: Logitech Logitech Illuminated Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.5/1-2.5.4/1-2.5.4:1.1/input/input3
- [ 5.849639] usb 1-2.5.4: link qh8-0e01/c1d89840 start 4 [1/2 us]
- [ 5.850280] generic-usb 0003:046D:C318.0002: input: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-ehci-omap.0-2.5.4/input1
- [ 5.870422] usb 1-2.5.4: adding 1-2.5.4:1.2 (config #1, interface 2)
- [ 5.870910] usbtest 1-2.5.4:1.2: usb_probe_interface
- [ 5.870941] usbtest 1-2.5.4:1.2: usb_probe_interface - got id
- [ 5.871032] usbhid 1-2.5.4:1.2: usb_probe_interface
- [ 5.871063] usbhid 1-2.5.4:1.2: usb_probe_interface - got id
- [ 5.896636] input: Logitech Logitech Illuminated Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.5/1-2.5.4/1-2.5.4:1.2/input/input4
- [ 5.918060] generic-usb 0003:046D:C318.0003: input: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-ehci-omap.0-2.5.4/input2
- [ 5.939392] /home/abuild/rpmbuild/BUILD/kernel-omap2plus-3.4.6/linux-3.4/drivers/usb/core/inode.c: creating file '006'
- [ 7.512573] emc: device handler registered
- [ 7.556549] rdac: device handler registered
- [ 7.600036] hp_sw: device handler registered
- [ 7.643005] alua: device handler registered
- [ 7.776153] udevd[82]: starting version 182
- [ 12.751831] kjournald starting. Commit interval 5 seconds
- [ 12.779541] EXT3-fs (mmcblk0p2): using internal journal
- [ 12.801422] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 15.418914] udevd[214]: starting version 182
- [ 20.186798] twl4030_wdt twl4030_wdt: Failed to register misc device
- [ 20.187072] twl4030_wdt: probe of twl4030_wdt failed with error -16
- [ 20.211486] twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 0
- [ 20.213195] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 20.269653] twl4030_madc twl4030_madc: clk disabled, enabling
- [ 21.177368] Adding 498008k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:498008k SS
- [ 21.290405] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
- [ 21.431182] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
- [ 24.886169] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 25.881256] nf_conntrack version 0.5.0 (7857 buckets, 31428 max)
- [ 25.968566] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 38.666168] usb 1-2.1: link qh8-0001/dbf0bf40 start 5 [1/0 us]
- [ 38.667480] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 40.175415] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 40.177734] smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 40.583648] NET: Registered protocol family 17
- [ 50.688720] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement