Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ~[2017-04-09 19:52:33] [Output] : ★ There would be 2 cardboard boxes standing by the gate, aswell as 4 tires wrapped- ((Lukas Ruiz))
- [2017-04-09 19:52:37] [Output] : ★ up in plastic. ((Lukas Ruiz))
- [2017-04-09 19:54:37] [Output] : ★ Lukas Ruiz extends both of his hands towards one of the boxes, grabbing it infront of his chest.
- [2017-04-09 19:55:04] [Output] : ★ Lukas Ruiz transports it over next to the BMW, laying it next to the front left fender.
- [2017-04-09 19:55:21] [Output] : ★ Lukas Ruiz repeats the process for the remaining cardbox, aswell as for the tires, as he would-
- [2017-04-09 19:55:36] [Output] : ★ roll each one individually, one to each end of the vehicle. ((Lukas Ruiz))
- [2017-04-09 19:56:06] [Output] : ★ Lukas Ruiz walks towards his tools area, wrapping his right around an utility belt, wrapping it-
- [2017-04-09 19:56:10] [Output] : ★ around his waist. ((Lukas Ruiz))
- [2017-04-09 19:56:34] [Output] : ★ Lukas Ruiz also grasps a red tool box, walking back towards the front left of the car, whilist-
- [2017-04-09 19:56:39] [Output] : ★ transporting the tool box. ((Lukas Ruiz))
- [2017-04-09 19:56:47] [Output] : ★ Lukas Ruiz lays it on the ground, popping it open.
- [2017-04-09 19:57:12] [Output] : ★ Lukas Ruiz crouches, quickly inspecting the wheel of the M2, aswell as the components around it.
- [2017-04-09 19:57:46] [Output] : ★ Lukas Ruiz wraps his right hand's fingers around a metal torque wrench, as he would then drag it-
- [2017-04-09 19:57:52] [Output] : ★ towards the wheel of the vehicle. ((Lukas Ruiz))
- [2017-04-09 19:58:10] [Output] : ★ Lukas Ruiz points it at one of the five nuts, sliding it in it.
- [2017-04-09 19:58:40] [Output] : ★ Lukas Ruiz rotates it counter-clockwise applying a nice amount of torque, loosening the nut.
- [2017-04-09 19:59:03] [Output] : ★ As it would be loose, he stores the nut in one little pocket in his belt. ((Lukas Ruiz))
- [2017-04-09 19:59:20] [Output] : ★ Lukas Ruiz repeats the process for the remaining 4, which would have took him around two-
- [2017-04-09 19:59:22] [Output] : ★ minutes. ((Lukas Ruiz))
- [2017-04-09 19:59:51] [Output] : ★ As the wheel would be free from nuts, Lukas would drop everything in his hands, ((Lukas Ruiz))
- [2017-04-09 20:00:11] [Output] : ★ as he would place each on one side of the Michelin tire, wiggling it out of the wheel. ((Lukas Ruiz))
- [2017-04-09 20:00:33] [Output] : ★ Lukas Ruiz lays it on the ground behind him, with the main part of the rim standing upwards,
- [2017-04-09 20:00:37] [Output] : ★ pointing at the ceiling. ((Lukas Ruiz))
- [2017-04-09 20:01:08] [Output] : ★ As the wheel would now be off, Lukas would grasp his torque wrench back with his right- ((Lukas Ruiz))
- [2017-04-09 20:01:24] [Output] : ★ hand's fingers, quickly inspecting the center nut on the brake disk. ((Lukas Ruiz))
- [2017-04-09 20:01:54] [Output] : ★ Lukas Ruiz slides the wrench inside of it, repeating the process he had done for the wheels'-
- [2017-04-09 20:01:55] [Output] : ★ nuts. ((Lukas Ruiz))
- [2017-04-09 20:02:26] [Output] : ★ Lukas Ruiz then slides the wrench behind the disk, mounting it on one of the duo of nuts holding.
- [2017-04-09 20:02:28] [Output] : ADVERT: [POLITICAL SATIRE] Rise up against the National Soalist Party! | http://tinyurl.com/lhldrrh |
- [2017-04-09 20:02:28] [Output] : Lukas Ruiz: (( -* ))
- [2017-04-09 20:02:36] [Output] : ★ the caliper onto the rotor. ((Lukas Ruiz))
- [2017-04-09 20:03:01] [Output] : ★ Lukas Ruiz finds a comfortable position, as he would then untighten the nut, loosening it completely.
- [2017-04-09 20:03:16] [Output] : ★ Lukas Ruiz then moves onto the next nut, pulling it out also.
- [2017-04-09 20:03:38] [Output] : ★ The caliper would being hold against the brake disk by friction, taking it only a few- ((Lukas Ruiz))
- [2017-04-09 20:03:43] [Output] : ★ seconds to fall off. ((Lukas Ruiz))
- [2017-04-09 20:04:10] [Output] : ★ Lukas Ruiz quickly reaches for the red caliper, pushing it outwards from the rotor, as the brake pads-
- [2017-04-09 20:04:16] [Output] : ★ would normally fall off. ((Lukas Ruiz))
- [2017-04-09 20:04:33] [Output] : ★ Lukas Ruiz stores the caliper next to the wheel behind him, on the ground, as he would then-
- [2017-04-09 20:04:43] [Output] : ★ slides the pads next to the caliper also. ((Lukas Ruiz))
- [2017-04-09 20:05:05] [Output] : ★ Lukas Ruiz then stands up, walking towards the driver's side door, pulling it outwards.
- [2017-04-09 20:05:28] [Output] : ★ Lukas Ruiz slides his body inside, quickly inspecting the modern interior, upon reaching for the-
- [2017-04-09 20:05:50] [Output] : ★ hood lever under the steering wheel, as you would hear a *click* sound coming from- ((Lukas Ruiz))
- [2017-04-09 20:05:54] [Output] : ★ the hood. ((Lukas Ruiz))
- [2017-04-09 20:06:23] [Output] : ★ Lukas Ruiz rushes to the last one, sliding his right palm between the grill and the hood, popping the-
- [2017-04-09 20:06:25] [Output] : ★ hood open. ((Lukas Ruiz))
- [2017-04-09 20:06:33] [Output] : ★ Lukas Ruiz secures it with the rod, by his left.
- [2017-04-09 20:06:55] [Output] : ★ Lukas Ruiz reaches for the tool box by his right, on the ground next to the wheel, as he would-
- [2017-04-09 20:07:26] [Output] : ★ wrap his right hand around a 15' mm extension, which he would quickly connect to a- ((Lukas Ruiz))
- [2017-04-09 20:07:35] [Output] : ★ a power wrench, also inside the box. ((Lukas Ruiz))
- [2017-04-09 20:08:03] [Output] : ★ Lukas Ruiz points it at one of the three screws holding the top mount of the coilover, just above-
- [2017-04-09 20:08:28] [Output] : ★ the fender, as he would press the button on the wrench, quickly untightening it. ((Lukas Ruiz))
- [2017-04-09 20:08:43] [Output] : ★ Lukas Ruiz repeats the process for the remaining duo, not completely, though.
- [2017-04-09 20:09:05] [Output] : ★ Lukas Ruiz then lays the wrench back on the tools box, grasping the torque wrench back.
- [2017-04-09 20:09:25] [Output] : ★ Lukas Ruiz points it at the bottom mount of the factory coilover, untightening it from the axle.
- [2017-04-09 20:09:46] [Output] : ★ Lukas Ruiz then pushes it outwards of the axle, as he would, with his right hand, fully untighten-
- [2017-04-09 20:10:02] [Output] : ★ the three top mount screws, whilist, holding the bottom of the coilover with his left hand. ((Lukas Ruiz))
- [2017-04-09 20:10:17] [Output] : ★ Lukas Ruiz then pushes it off, with the 3 screws, falling through the engine bay, onto the ground.
- [2017-04-09 20:10:31] [Output] : ★ Lukas Ruiz then reaches for his belt, grasping an utility knife
- [2017-04-09 20:10:53] [Output] : ★ Lukas Ruiz rips the tape from the cardboard box by his right, reading 'BC Racing' on each side.
- [2017-04-09 20:11:17] [Output] : ★ Lukas Ruiz peeks inside, unwrapping one of the front coilovers, as he would then inspect it with-
- [2017-04-09 20:11:38] [Output] : ★ a smile, quickly showing it to the customer sitting on the couch by his right, behind him. ((Lukas Ruiz))
- [2017-04-09 20:12:15] [Output] : ★ Lukas Ruiz then slides it in the correct position in the car, lightly tightening the 3 screws on the-
- [2017-04-09 20:12:19] [Output] : ★ top mount. ((Lukas Ruiz))
- [2017-04-09 20:12:43] [Output] : ★ Lukas Ruiz then guides the bottom mount onto the axle, applying a nice amount of strength, as it-
- [2017-04-09 20:12:49] [Output] : Lukas Ruiz: (( -* ))
- [2017-04-09 20:13:03] [Output] : ★ would finally be in place. ((Lukas Ruiz))
- [2017-04-09 20:13:23] [Output] : ★ Lukas Ruiz slides a small nut on the ground, from the old coilovers in the mount under-
- [2017-04-09 20:13:50] [Output] : ★ the coilover, tightening it in place with the torque wrench, according the the values- ((Lukas Ruiz))
- [2017-04-09 20:13:56] [Output] : ★ given by BC Racing. ((Lukas Ruiz))
- [2017-04-09 20:14:27] [Output] : ★ Lukas Ruiz then moves onto the top mounts, grabbing the power wrench on his way up.
- [2017-04-09 20:14:48] [Output] : ★ Lukas Ruiz slides 3 screws in the top mounts, tightening them lightly.
- [2017-04-09 20:15:37] [Output] : ★ Lukas Ruiz then slides the wrench onto each one, tightening them completelym securing it-
- [2017-04-09 20:15:39] [Output] : ★ in place. ((Lukas Ruiz))
- [2017-04-09 20:17:06] [Output] : Lukas Ruiz: (( tightening them completely* ))
- [2017-04-09 20:17:28] [Output] : ★ As the coilovers would be finished, Lukas proceeds to unwrap the cardboard box- ((Lukas Ruiz))
- [2017-04-09 20:17:34] [Output] : ★ containing the brakes kit. ((Lukas Ruiz))
- [2017-04-09 20:18:17] [Output] : ★ Lukas Ruiz grabs a front disk, as he would then guide it onto the hub, grabbing a bag of nuts from-
- [2017-04-09 20:18:30] [Output] : ★ the box, sliding it in the center of the rotor. ((Lukas Ruiz))
- [2017-04-09 20:18:41] [Output] : ★ Lukas Ruiz tightens it completely with the torque wrench.
- [2017-04-09 20:19:25] [Output] : ★ Lukas Ruiz then proceeds to grasp a caliper from the box, aswell as the pads, as he would slide the-
- [2017-04-09 20:19:34] [Output] : ★ last ones inside the caliper, mounting them in place. ((Lukas Ruiz))
- [2017-04-09 20:19:51] [Output] : ★ Lukas Ruiz thens slides the caliper onto the brake rotor, as he would secure it with nuts-
- [2017-04-09 20:20:07] [Output] : ★ which would be onto the plastic bag he had previously took one nut from. ((Lukas Ruiz))
- [2017-04-09 20:20:31] [Output] : ★ Lukas Ruiz tightens these lightly with his hands first, to lign the caliper correctly, as he would-
- [2017-04-09 20:20:41] [Output] : ★ only then finally tighten them with the torque wrench. ((Lukas Ruiz))
- [2017-04-09 20:21:20] [Output] : ★ Lukas Ruiz reaches back for the cardboard box, grasping a rather fat brake fluid tube.
- [2017-04-09 20:21:35] [Output] : ★ Lukas Ruiz mounts it in place, securing it with hose clamps on each side.
- [2017-04-09 20:22:06] [Output] : ★ As the brakes would be done by now, Lukas would then stand back up, stretching his back- ((Lukas Ruiz))
- [2017-04-09 20:22:23] [Output] : ★ a bit, due to being on his knees and back for a long time. ((Lukas Ruiz))
- [2017-04-09 20:22:46] [Output] : ★ Lukas Ruiz would then take off his sweaty oily t-shirt, cleaning the sweat on his face and hands-
- [2017-04-09 20:22:49] [Output] : ★ with it. ((Lukas Ruiz))
- [2017-04-09 20:23:21] [Output] : ★ Lukas Ruiz turns 90º to his left, facing the new rims equipped with new Maxxis grip tires.
- [2017-04-09 20:23:40] [Output] : ★ Lukas Ruiz wraps both hands around it, rolling it over to the hub.
- [2017-04-09 20:24:10] [Output] : ★ Lukas Ruiz lifts it up with a bit of struggle, despite the wheel's light weight, sliding it in the hub.
- [2017-04-09 20:24:35] [Output] : ★ You would notice a lot of angle on the wheel due to not being tighten in place, as Lukas- ((Lukas Ruiz))
- [2017-04-09 20:24:52] [Output] : ★ would fight that back by grabbing 5 nuts from the back, sliding them in their compartiments- ((Lukas Ruiz))
- [2017-04-09 20:24:56] [Output] : ★ in the wheel. ((Lukas Ruiz))
- [2017-04-09 20:25:13] [Output] : ★ Lukas Ruiz tightly tights them up with the torque wrench, around 35%.
- [2017-04-09 20:25:44] [Output] : ★ As he checks for a correct alignment of the wheel, he would then finally completely- ((Lukas Ruiz))
- [2017-04-09 20:25:51] [Output] : ★ tighten the 5 nuts. ((Lukas Ruiz))
- [2017-04-09 20:26:06] [Output] : ★ Lukas Ruiz stands up, as he would move towards the right back side of the car.
- [2017-04-09 20:26:30] [Output] : ★ Lukas Ruiz slides the torque wrench on one of the nuts, untightening it with a bit of strength.
- [2017-04-09 20:26:51] [Output] : ★ As this one would be loose, he would repeat the process for the remaining 4 nuts, and the- ((Lukas Ruiz))
- [2017-04-09 20:27:03] [Output] : ★ whole process for the remaining 3 zones of the vehicle. ((Lukas Ruiz))
- [2017-04-09 20:27:20] [Output] : ★ The M2 would be lowered around 6 centimeters, equipped with new tires and brakes. ((Lukas Ruiz))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement