Advertisement
rz2k

Untitled

Jul 21st, 2012
219
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.11 KB | None | 0 0
  1. LIVALL # setenv bootargs root=/dev/mmcblk1p3 console=ttyS0,115200n8n SELINUX_INIT=no mem=64M@0x40000000 rw video=qfb: rootfstype=ext3 rootwait;bootm 40007fc0
  2. ## Booting kernel from Legacy Image at 40007fc0 ...
  3. Image Name: Linux-2.6.35.7
  4. Image Type: ARM Linux Kernel Image (uncompressed)
  5. Data Size: 4644960 Bytes = 4.4 MB
  6. Load Address: 40008000
  7. Entry Point: 40008000
  8. Verifying Checksum ... OK
  9. Loading Kernel Image ... OK
  10. OK
  11.  
  12. Starting kernel ...
  13.  
  14. Initializing cgroup subsys cpu
  15. Linux version 2.6.35.7 (zkl@and-ser2) (gcc version 4.4.3 (GCC) ) #11220 SMP PREEMPT Tue Dec 20 10:00:59 CST 2011
  16. CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c57c7f
  17. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  18. Machine: EMXX
  19. Memory policy: ECC disabled, Data cache writealloc
  20. Normal zone: 1 pages exceeds realsize 0
  21. Normal zone: 1 pages exceeds realsize 0
  22. Normal zone: 1 pages exceeds realsize 0
  23. PERCPU: Embedded 6 pages/cpu @c05be000 s3872 r8192 d12512 u65536
  24. pcpu-alloc: s3872 r8192 d12512 u65536 alloc=16*4096
  25. pcpu-alloc: [0] 0 [0] 1
  26. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  27. Kernel command line: root=/dev/mmcblk1p3 console=ttyS0,115200n8n SELINUX_INIT=no mem=64M@0x40000000 rw video=qfb: rootfstype=ext3 rootwait
  28. PID hash table entries: 256 (order: -2, 1024 bytes)
  29. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  31. Memory: 64MB = 64MB total
  32. Memory: 59576k/59576k available, 5960k reserved, 0K highmem
  33. Virtual kernel memory layout:
  34. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  37. vmalloc : 0xc4800000 - 0xf0000000 ( 696 MB)
  38. lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  39. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  40. .init : 0xc0008000 - 0xc0026000 ( 120 kB)
  41. .text : 0xc0026000 - 0xc0429000 (4108 kB)
  42. .data : 0xc0442000 - 0xc0476060 ( 209 kB)
  43. Hierarchical RCU implementation.
  44. RCU-based detection of stalled CPUs is disabled.
  45. Verbose stalled-CPUs detection is disabled.
  46. NR_IRQS:374
  47. Console: colour dummy device 80x30
  48. Calibrating delay loop... 1061.68 BogoMIPS (lpj=5308416)
  49. pid_max: default: 32768 minimum: 301
  50. Mount-cache hash table entries: 512
  51. Initializing cgroup subsys cpuacct
  52. Initializing cgroup subsys freezer
  53. CPU: Testing write buffer coherency: ok
  54. CPU1: Booted secondary processor
  55. Brought up 2 CPUs
  56. SMP: Total of 2 processors activated (2126.64 BogoMIPS).
  57. NET: Registered protocol family 16
  58. L310 cache controller enabled
  59. l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x40440000
  60. chip revision 420
  61. bio: create slab <bio-0> at 0
  62. SCSI subsystem initialized
  63. usbcore: registered new interface driver usbfs
  64. usbcore: registered new interface driver hub
  65. usbcore: registered new device driver usb
  66. Advanced Linux Sound Architecture Driver Version 1.0.23.
  67. Bluetooth: Core ver 2.15
  68. NET: Registered protocol family 31
  69. Bluetooth: HCI device and connection manager initialized
  70. Bluetooth: HCI socket layer initialized
  71. cfg80211: Calling CRDA to update world regulatory domain
  72. Switching to clocksource sti
  73. NET: Registered protocol family 2
  74. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  75. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  76. TCP bind hash table entries: 2048 (order: 2, 24576 bytes)
  77. TCP: Hash tables configured (established 2048 bind 2048)
  78. TCP reno registered
  79. UDP hash table entries: 128 (order: 0, 4096 bytes)
  80. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  81. NET: Registered protocol family 1
  82. RPC: Registered udp transport module.
  83. RPC: Registered tcp transport module.
  84. RPC: Registered tcp NFSv4.1 backchannel transport module.
  85. Power Management for EMXX.
  86. spi: registered device spi [spi]
  87. Starting pmu...
  88. ashmem: initialized
  89. msgmni has been set to 116
  90. alg: No test for stdrng (krng)
  91. io scheduler noop registered
  92. io scheduler deadline registered (default)
  93. io scheduler cfq registered
  94. emxx_fb: registered device fb
  95. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  96. serial8250.0: ttyS0 at MMIO 0xe1020000 (irq = 40) is a TI16750
  97. console [ttyS0] enabled
  98. serial8250.0: ttyS1 at MMIO 0xe1030000 (irq = 41) is a TI16750
  99. serial8250.0: ttyS2 at MMIO 0xe1040000 (irq = 42) is a TI16750
  100. serial8250.0: ttyS3 at MMIO 0xe1050000 (irq = 43) is a TI16750
  101. loop: module loaded
  102. i2c /dev entries driver
  103. hdmi:IT6610 Detected
  104. hdmi:probe successfully!
  105. Linux video capture interface: v2.00
  106. emxx_v4l2: registered device video0 [v4l2]
  107. emxx_camera : "GC0307" registered device video1 [V4L2]
  108. PPP generic driver version 2.4.2
  109. PPP Deflate Compression module registered
  110. PPP BSD Compression module registered
  111. smsc911x: Driver version 2008-10-21.
  112. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  113. emxx-ohci-driver emxx-ohci-driver: EMXX OHCI
  114. emxx-ohci-driver emxx-ohci-driver: new USB bus registered, assigned bus number 1
  115. emxx-ohci-driver emxx-ohci-driver: irq 115, io mem 0xe2700000
  116. hub 1-0:1.0: USB hub found
  117. hub 1-0:1.0: 1 port detected
  118. ohci_hcd: ***** USB Over Current !!
  119.  
  120. Initializing USB Mass Storage driver...
  121. usbcore: registered new interface driver usb-storage
  122. USB Mass Storage support registered.
  123. usbcore: registered new interface driver usbserial
  124. usbserial: USB Serial Driver core
  125. USB Serial support registered for GSM modem (1-port)
  126. usbcore: registered new interface driver option
  127. option: v0.7.2:USB Driver for GSM modems
  128. udc: version Dec 20 2011
  129. android init
  130. android_probe pdata: c0455e7c
  131. android_bind
  132. android_usb gadget: android_usb ready
  133. udc: ----- VBUS OFF
  134. f_adb init
  135. android_register_function adb
  136. f_mass_storage init
  137. fsg_probe pdev: c0455660, pdata: c0455e6c
  138. android_register_function usb_mass_storage
  139. android_usb gadget: Mass Storage Function, version: 2009/09/11
  140. android_usb gadget: Number of LUNs=2
  141. lun0: LUN: removable file: (no medium)
  142. lun1: LUN: removable file: (no medium)
  143. adb_bind_config
  144. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  145. input: remocon as /devices/virtual/input/input1
  146. rtc-pcf8563 0-0051: chip found, driver version 0.4.3
  147. using rtc device, rtc-pcf8563, for alarms
  148. rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
  149. Starting wdt.
  150. device-mapper: uevent: version 1.0.3
  151. device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  152. Bluetooth: HCI UART driver ver 2.2
  153. Bluetooth: HCI H4 protocol initialized
  154. bcm_pwr_init
  155. usbcore: registered new interface driver usbhid
  156. usbhid: USB HID core driver
  157. logger: created 64K log 'log_main'
  158. logger: created 256K log 'log_events'
  159. logger: created 64K log 'log_radio'
  160. logger: created 64K log 'log_system'
  161. emxx_nts: registered device ntsc
  162. Starting sound codec.
  163. ALSA device list:
  164. #0: sound codec (emxx mixer)
  165. TCP cubic registered
  166. NET: Registered protocol family 17
  167. emev_rfkill_probe
  168. emev_rfkill_set_power
  169. Bluetooth: L2CAP ver 2.14
  170. Bluetooth: L2CAP socket layer initialized
  171. Bluetooth: SCO (Voice Link) ver 0.6
  172. Bluetooth: SCO socket layer initialized
  173. Bluetooth: RFCOMM TTY layer initialized
  174. Bluetooth: RFCOMM socket layer initialized
  175. Bluetooth: RFCOMM ver 1.11
  176. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  177. Bluetooth: BNEP filters: protocol multicast
  178. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  179. Skipping unavailable LED gpio 160 (led1)
  180. Skipping unavailable LED gpio 160 (led2)
  181. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  182. input: pixcir168 as /devices/i2c-0/0-005c/input/input2
  183. mmc0: new high speed MMC card at address 0001
  184. mmcblk0: mmc0:0001 SEM04G 3.68 GiB
  185. emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: insmod successfully!
  186. mmcblk0:
  187. rtc-pcf8563 0-0051: setting system clock to 1970-01-02 00:39:32 UTC (88772)
  188. axp192_bat_init
  189. p1emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: Unable to write to i2c touchscreen!
  190. p2 p3 p4 <
  191. axp192_battery axp192_battery: axp192_bat_probe
  192. register power supply successful
  193. p5
  194. touchkey 0-0050: insmod successfully!
  195. p6 p7 >
  196. input: emxx-sensors as /devices/platform/emxx_sensors_plat/input/input3
  197. [GOODIX] check another ts, ignore ...
  198. Goodix-TS: probe of 0-0055 failed with error -17
  199. touch_button:eKT2201 Detected(Product ID:0x22)
  200. input: tb_i2c as /devices/i2c-0/0-0010/input/input4
  201. touch_button:probe successfully!
  202. Waiting for root device /dev/mmcblk1p3...
  203. mmc1: new high speed SD card at address 0002
  204. mmcblk1: mmc1:0002 00000 1.90 GiB
  205. mmcblk1: p1 p2 p3
  206. EXT3-fs: barriers not enabled
  207. kjournald starting. Commit interval 5 seconds
  208. EXT3-fs (mmcblk1p3): using internal journal
  209. EXT3-fs (mmcblk1p3): recovery complete
  210. EXT3-fs (mmcblk1p3): mounted filesystem with writeback data mode
  211. VFS: Mounted root (ext3 filesystem) on device 179:11.
  212. Freeing init memory: 120K
  213. Kernel panic - not syncing: Attempted to kill init!
  214. [<c002d768>] (unwind_backtrace+0x0/0xf0) from [<c0329c2c>] (panic+0x6c/0xe8)
  215. [<c0329c2c>] (panic+0x6c/0xe8) from [<c0057a38>] (do_exit+0x68/0x5e8)
  216. [<c0057a38>] (do_exit+0x68/0x5e8) from [<c0058048>] (do_group_exit+0x90/0xc0)
  217. [<c0058048>] (do_group_exit+0x90/0xc0) from [<c0058088>] (sys_exit_group+0x10/0x18)
  218. [<c0058088>] (sys_exit_group+0x10/0x18) from [<c0027180>] (ret_fast_syscall+0x0/0x30)
  219. Rebooting in 5 seconds..
  220. CPU0: stopping
  221. [<c002d768>] (unwind_backtrace+0x0/0xf0) from [<c0026318>] (do_IPI+0xd8/0x150)
  222. [<c0026318>] (do_IPI+0xd8/0x150) from [<c0026c88>] (__irq_svc+0x48/0xe0)
  223. Exception stack(0xc0443f60 to 0xc0443fa8)
  224. 3f60: 00000000 c049791c f300a000 000058e6 c04765a0 c0451838 c04762c4 c032e2e0
  225. 3f80: 4001fda8 411fc092 0000001f 00000000 00000002 c0443fa8 c00344d0 c00344d8
  226. 3fa0: 60000013 ffffffff
  227. [<c0026c88>] (__irq_svc+0x48/0xe0) from [<c00344d8>] (emxx_pm_idle+0x278/0x2a0)
  228. [<c00344d8>] (emxx_pm_idle+0x278/0x2a0) from [<c0028698>] (cpu_idle+0x7c/0xd8)
  229. [<c0028698>] (cpu_idle+0x7c/0xd8) from [<c0008b10>] (start_kernel+0x25c/0x2b0)
  230. unwind: Unknown symbol address c0008b10
  231. unwind: Index not found c0008b10
  232. mode = 's'
  233. BUG: scheduling while atomic: init/1/0x00000002
  234. Modules linked in:
  235. [<c002d768>] (unwind_backtrace+0x0/0xf0) from [<c032a1ac>] (schedule+0x8c/0x4f8)
  236. [<c032a1ac>] (schedule+0x8c/0x4f8) from [<c032aa08>] (schedule_timeout+0x1c0/0x1fc)
  237. [<c032aa08>] (schedule_timeout+0x1c0/0x1fc) from [<c01bf2cc>] (emxx_i2c_wait_for_pin+0x16c/0x240)
  238. [<c01bf2cc>] (emxx_i2c_wait_for_pin+0x16c/0x240) from [<c01bf66c>] (emxx_i2c_xfer+0x2b0/0x628)
  239. [<c01bf66c>] (emxx_i2c_xfer+0x2b0/0x628) from [<c01bc9b4>] (i2c_transfer+0xa0/0xf4)
  240. [<c01bc9b4>] (i2c_transfer+0xa0/0xf4) from [<c01bd380>] (i2c_master_send+0x38/0x48)
  241. [<c01bd380>] (i2c_master_send+0x38/0x48) from [<c003f6c8>] (axp192_read+0x2c/0x54)
  242. [<c003f6c8>] (axp192_read+0x2c/0x54) from [<c003f8e4>] (axp192_set_charging+0x20/0x34)
  243. [<c003f8e4>] (axp192_set_charging+0x20/0x34) from [<c003fb24>] (axp192_poweroff+0x18/0x3c)
  244. [<c003fb24>] (axp192_poweroff+0x18/0x3c) from [<c0039968>] (emxx_pm_do_poweroff_restart+0x28/0x48)
  245. [<c0039968>] (emxx_pm_do_poweroff_restart+0x28/0x48) from [<c0033ef0>] (emxx_pm_power_off_restart+0x10/0x3c)
  246. [<c0033ef0>] (emxx_pm_power_off_restart+0x10/0x3c) from [<c0028734>] (arm_machine_restart+0x40/0x70)
  247. [<c0028734>] (arm_machine_restart+0x40/0x70) from [<c002838c>] (machine_restart+0x18/0x20)
  248. [<c002838c>] (machine_restart+0x18/0x20) from [<c0329c84>] (panic+0xc4/0xe8)
  249. [<c0329c84>] (panic+0xc4/0xe8) from [<c0057a38>] (do_exit+0x68/0x5e8)
  250. [<c0057a38>] (do_exit+0x68/0x5e8) from [<c0058048>] (do_group_exit+0x90/0xc0)
  251. [<c0058048>] (do_group_exit+0x90/0xc0) from [<c0058088>] (sys_exit_group+0x10/0x18)
  252. [<c0058088>] (sys_exit_group+0x10/0x18) from [<c0027180>] (ret_fast_syscall+0x0/0x30)
  253. BUG: scheduling while atomic: init/1/0x00000002
  254. Modules linked in:
  255. [<c002d768>] (unwind_backtrace+0x0/0xf0) from [<c032a1ac>] (schedule+0x8c/0x4f8)
  256. [<c032a1ac>] (schedule+0x8c/0x4f8) from [<c032aa08>] (schedule_timeout+0x1c0/0x1fc)
  257. [<c032aa08>] (schedule_timeout+0x1c0/0x1fc) from [<c01bf2cc>] (emxx_i2c_wait_for_pin+0x16c/0x240)
  258. [<c01bf2cc>] (emxx_i2c_wait_for_pin+0x16c/0x240) from [<c01bf66c>] (emxx_i2c_xfer+0x2b0/0x628)
  259. [<c01bf66c>] (emxx_i2c_xfer+0x2b0/0x628) from [<c01bc9b4>] (i2c_transfer+0xa0/0xf4)
  260. [<c01bc9b4>] (i2c_transfer+0xa0/0xf4) from [<c01bd380>] (i2c_master_send+0x38/0x48)
  261. [<c01bd380>] (i2c_master_send+0x38/0x48) from [<c003f6c8>] (axp192_read+0x2c/0x54)
  262. [<c003f6c8>] (axp192_read+0x2c/0x54) from [<c003f8e4>] (axp192_set_charging+0x20/0x34)
  263. [<c003f8e4>] (axp192_set_charging+0x20/0x34) from [<c003fb24>] (axp192_poweroff+0x18/0x3c)
  264. [<c003fb24>] (axp192_poweroff+0x18/0x3c) from [<c0039968>] (emxx_pm_do_poweroff_restart+0x28/0x48)
  265. [<c0039968>] (emxx_pm_do_poweroff_restart+0x28/0x48) from [<c0033ef0>] (emxx_pm_power_off_restart+0x10/0x3c)
  266. [<c0033ef0>] (emxx_pm_power_off_restart+0x10/0x3c) from [<c0028734>] (arm_machine_restart+0x40/0x70)
  267. [<c0028734>] (arm_machine_restart+0x40/0x70) from [<c002838c>] (machine_restart+0x18/0x20)
  268. [<c002838c>] (machine_restart+0x18/0x20) from [<c0329c84>] (panic+0xc4/0xe8)
  269. [<c0329c84>] (panic+0xc4/0xe8) from [<c0057a38>] (do_exit+0x68/0x5e8)
  270. [<c0057a38>] (do_exit+0x68/0x5e8) from [<c0058048>] (do_group_exit+0x90/0xc0)
  271. [<c0058048>] (do_group_exit+0x90/0xc0) from [<c0058088>] (sys_exit_group+0x10/0x18)
  272. [<c0058088>] (sys_exit_group+0x10/0x18) from [<c0027180>] (ret_fast_syscall+0x0/0x30)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement