API tools faq
paste
Guest User

Untitled

a guest
Mar 13th, 2020
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.04 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.15-arch1-1] (local build)
  2. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Toshiba 2.5" HDD MQ01ABF...
  6. Device Model: TOSHIBA MQ01ABF050
  7. Serial Number: 631EWDPLT
  8. LU WWN Device Id: 5 000039 4d4b003d4
  9. Firmware Version: AM003M
  10. User Capacity: 500,107,862,016 bytes [500 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS (minor revision not indicated)
  16. SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Mon Dec 16 15:59:35 2019 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 120) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 121) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  61. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1288
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3694
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 48
  64. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  66. 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 15083
  67. 10 Spin_Retry_Count 0x0033 173 100 030 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3656
  69. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 40100
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 442
  71. 193 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 217200
  72. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 10/59)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 6
  74. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 48
  75. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  77. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
  78. 222 Loaded_Hours 0x0032 067 067 000 Old_age Always - 13455
  79. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  80. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  81. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 263
  82. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 976 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 976 occurred at disk power-on lifetime: 15080 hours (628 days + 8 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 40 41 08 60 44 63 40 Error: UNC at LBA = 0x00634460 = 6505568
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 60 08 08 60 44 63 40 00 17:37:30.291 READ FPDMA QUEUED
  112. ef 10 03 00 00 00 a0 00 17:37:30.286 SET FEATURES [Enable SATA feature]
  113. ef 10 02 00 00 00 a0 00 17:37:30.286 SET FEATURES [Enable SATA feature]
  114. 27 00 00 00 00 00 e0 00 17:37:30.285 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  115. ec 00 00 00 00 00 a0 00 17:37:30.284 IDENTIFY DEVICE
  116.  
  117. Error 975 occurred at disk power-on lifetime: 15080 hours (628 days + 8 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 40 41 88 60 44 63 40 Error: UNC at LBA = 0x00634460 = 6505568
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 60 08 88 60 44 63 40 00 17:37:26.102 READ FPDMA QUEUED
  129. ef 10 03 00 00 00 a0 00 17:37:26.097 SET FEATURES [Enable SATA feature]
  130. ef 10 02 00 00 00 a0 00 17:37:26.096 SET FEATURES [Enable SATA feature]
  131. 27 00 00 00 00 00 e0 00 17:37:26.096 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  132. ec 00 00 00 00 00 a0 00 17:37:26.095 IDENTIFY DEVICE
  133.  
  134. Error 974 occurred at disk power-on lifetime: 15080 hours (628 days + 8 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 40 41 68 60 44 63 40 Error: UNC at LBA = 0x00634460 = 6505568
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 60 08 68 60 44 63 40 00 17:37:21.924 READ FPDMA QUEUED
  146. ef 10 03 00 00 00 a0 00 17:37:21.919 SET FEATURES [Enable SATA feature]
  147. ef 10 02 00 00 00 a0 00 17:37:21.918 SET FEATURES [Enable SATA feature]
  148. 27 00 00 00 00 00 e0 00 17:37:21.918 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  149. ec 00 00 00 00 00 a0 00 17:37:21.917 IDENTIFY DEVICE
  150.  
  151. Error 973 occurred at disk power-on lifetime: 15080 hours (628 days + 8 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 40 41 18 60 44 63 40 Error: UNC at LBA = 0x00634460 = 6505568
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 60 08 18 60 44 63 40 00 17:37:17.666 READ FPDMA QUEUED
  163. 60 08 10 58 44 63 40 00 17:37:17.666 READ FPDMA QUEUED
  164. 60 08 08 50 44 63 40 00 17:37:17.644 READ FPDMA QUEUED
  165. 60 08 00 48 44 63 40 00 17:37:17.644 READ FPDMA QUEUED
  166. 60 08 f8 40 44 63 40 00 17:37:17.388 READ FPDMA QUEUED
  167.  
  168. Error 972 occurred at disk power-on lifetime: 15080 hours (628 days + 8 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 40 41 78 60 44 63 40 Error: UNC at LBA = 0x00634460 = 6505568
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. 60 80 78 00 44 63 40 00 17:37:02.442 READ FPDMA QUEUED
  180. 60 08 70 f8 43 63 40 00 17:37:02.420 READ FPDMA QUEUED
  181. 60 08 68 f0 43 63 40 00 17:37:02.397 READ FPDMA QUEUED
  182. 60 08 60 e8 43 63 40 00 17:37:02.375 READ FPDMA QUEUED
  183. 61 40 38 98 43 63 40 00 17:37:02.052 WRITE FPDMA QUEUED
  184.  
  185. SMART Self-test log structure revision number 1
  186. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!