[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.22-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #987 SMP Fri Apr 14 23:23:05 BST 2017
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80c6edc0, node_mem_map b9faa000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu @b9f64000 s25600 r8192 d23552 u57344
[    0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 936304K/966656K available (7168K kernel code, 483K rwdata, 2012K rodata, 1024K init, 778K bss, 22160K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80800000   (8160 kB)
      .init : 0x80b00000 - 0x80c00000   (1024 kB)
      .data : 0x80c00000 - 0x80c78f94   ( 484 kB)
       .bss : 0x80c7a000 - 0x80d3ca64   ( 779 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000024] Switching to timer-based delay loop, resolution 52ns
[    0.000322] Console: colour dummy device 80x30
[    0.001214] console [tty1] enabled
[    0.001262] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001332] pid_max: default: 32768 minimum: 301
[    0.001693] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001736] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002752] Disabling cpuset control group subsystem
[    0.002947] CPU: Testing write buffer coherency: ok
[    0.003017] ftrace: allocating 22386 entries in 66 pages
[    0.054610] CPU0: update cpu_capacity 1024
[    0.054676] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.054777] Setting up static identity map for 0x100000 - 0x100034
[    0.057049] CPU1: update cpu_capacity 1024
[    0.057057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.057780] CPU2: update cpu_capacity 1024
[    0.057787] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.058457] CPU3: update cpu_capacity 1024
[    0.058463] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.058546] Brought up 4 CPUs
[    0.058719] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.058748] CPU: All CPU(s) started in HYP mode.
[    0.058775] CPU: Virtualization extensions available.
[    0.059594] devtmpfs: initialized
[    0.070685] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.071007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.071069] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.071633] pinctrl core: initialized pinctrl subsystem
[    0.072554] NET: Registered protocol family 16
[    0.074840] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.083709] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.083758] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.083930] Serial: AMBA PL011 UART driver
[    0.085810] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.086360] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.155190] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[    0.157046] SCSI subsystem initialized
[    0.157223] usbcore: registered new interface driver usbfs
[    0.157330] usbcore: registered new interface driver hub
[    0.157446] usbcore: registered new device driver usb
[    0.164162] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-04-04 18:41
[    0.165579] clocksource: Switched to clocksource arch_sys_counter
[    0.212596] VFS: Disk quotas dquot_6.6.0
[    0.212706] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.212938] FS-Cache: Loaded
[    0.213205] CacheFiles: Loaded
[    0.225412] NET: Registered protocol family 2
[    0.226335] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.226474] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.226684] TCP: Hash tables configured (established 8192 bind 8192)
[    0.226802] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.226870] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.227119] NET: Registered protocol family 1
[    0.227555] RPC: Registered named UNIX socket transport module.
[    0.227588] RPC: Registered udp transport module.
[    0.227616] RPC: Registered tcp transport module.
[    0.227643] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.228598] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.230907] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.247043] FS-Cache: Netfs 'nfs' registered for caching
[    0.248044] NFS: Registering the id_resolver key type
[    0.248096] Key type id_resolver registered
[    0.248124] Key type id_legacy registered
[    0.250568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.250714] io scheduler noop registered
[    0.250744] io scheduler deadline registered (default)
[    0.251079] io scheduler cfq registered
[    0.256776] BCM2708FB: allocated DMA memory fa910000
[    0.256830] BCM2708FB: allocated DMA channel 0 @ bb80f000
[    0.288603] Console: switching to colour frame buffer device 170x48
[    0.307151] bcm2835-rng 3f104000.rng: hwrng registered
[    0.307406] vc-cma: Videocore CMA driver
[    0.307522] vc-cma: vc_cma_base      = 0x00000000
[    0.307657] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.307809] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.308164] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.323760] brd: module loaded
[    0.332765] loop: module loaded
[    0.332892] Loading iSCSI transport class v2.0-870.
[    0.333541] usbcore: registered new interface driver smsc95xx
[    0.333718] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.559914] Core Release: 2.80a
[    0.560022] Setting default values for core params
[    0.564950] Finished setting default values for core params
[    0.770248] Using Buffer DMA mode
[    0.775038] Periodic Transfer Interrupt Enhancement - disabled
[    0.779972] Multiprocessor Interrupt Enhancement - disabled
[    0.784922] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.789820] Dedicated Tx FIFOs mode
[    0.794975] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024
[    0.800082] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    0.824689] dwc_otg: Microframe scheduler enabled
[    0.824733] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058e15c
[    0.829787] WARN::hcd_init_fiq:460: FIQ ASM at 0x8058e4cc length 36
[    0.834840] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000
[    0.839871] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.844812] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.849780] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.854669] Init: Port Power? op_state=1
[    0.859496] Init: Power Port (0)
[    0.864456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.869429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.874332] usb usb1: Product: DWC OTG Controller
[    0.879169] usb usb1: Manufacturer: Linux 4.9.22-v7+ dwc_otg_hcd
[    0.884035] usb usb1: SerialNumber: 3f980000.usb
[    0.889734] hub 1-0:1.0: USB hub found
[    0.894623] hub 1-0:1.0: 1 port detected
[    0.900137] dwc_otg: FIQ enabled
[    0.900142] dwc_otg: NAK holdoff enabled
[    0.900146] dwc_otg: FIQ split-transaction FSM enabled
[    0.900160] Module dwc_common_port init
[    0.900400] usbcore: registered new interface driver usb-storage
[    0.905557] mousedev: PS/2 mouse device common for all mice
[    0.911490] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.916741] bcm2835-cpufreq: min=600000 max=1200000
[    0.922046] sdhci: Secure Digital Host Controller Interface driver
[    0.927085] sdhci: Copyright(c) Pierre Ossman
[    0.932395] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[    0.939822] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.945110] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.957551] ledtrig-cpu: registered to indicate activity on CPUs
[    0.962952] hidraw: raw HID events driver (C) Jiri Kosina
[    0.968384] usbcore: registered new interface driver usbhid
[    0.973605] usbhid: USB HID core driver
[    0.979606] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0
[    0.987762] Initializing XFRM netlink socket
[    0.993046] NET: Registered protocol family 17
[    0.998456] Key type dns_resolver registered
[    1.004045] Registering SWP/SWPB emulation handler
[    1.010080] registered taskstats version 1
[    1.015597] vc-sm: Videocore shared memory driver
[    1.020745] [vc_sm_connected_init]: start
[    1.026382] [vc_sm_connected_init]: end - returning 0
[    1.037383] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.044048] sdhost: log_buf @ ba907000 (fa907000)
[    1.115701] Indeed it is in host mode hprt0 = 00021501
[    1.180877] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.188342] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.193578] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.208486] random: fast init done
[    1.255724] of_cfs_init
[    1.260894] of_cfs_init: OK
[    1.266534] Waiting for root device /dev/mmcblk0p2...
[    1.274770] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.281450] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.288010] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.295741] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.335655] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.340704] Indeed it is in host mode hprt0 = 00001101
[    1.416587] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.425457] mmc0: new high speed SDXC card at address aaaa
[    1.431285] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[    1.441827]  mmcblk0: p1 p2
[    1.483363] mmc1: new high speed SDIO card at address 0001
[    1.538205] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.543392] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.551957] devtmpfs: mounted
[    1.558848] Freeing unused kernel memory: 1024K (80b00000 - 80c00000)
[    1.575904] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.581130] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.587135] hub 1-1:1.0: USB hub found
[    1.592317] hub 1-1:1.0: 5 ports detected
[    1.829431] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    1.835183] systemd[1]: Detected architecture 'arm'.
[    1.915633] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.977783] NET: Registered protocol family 10
[    1.984476] systemd[1]: Inserted module 'ipv6'
[    1.994178] systemd[1]: Set hostname to <LivingroomPi>.
[    2.046092] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.052076] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.060968] smsc95xx v1.0.5
[    2.159679] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e7:6c:71
[    2.265648] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[    2.379755] systemd[1]: Cannot add dependency job for unit regenerate_ssh_host_keys.service, ignoring: Unit regenerate_ssh_host_keys.service failed to load: No such file or directory.
[    2.395131] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.401790] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.402136] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b
[    2.402145] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.402152] usb 1-1.4: Product: USB Receiver
[    2.402158] usb 1-1.4: Manufacturer: Logitech
[    2.433080] systemd[1]: Starting Remote File Systems (Pre).
[    2.446539] systemd[1]: Reached target Remote File Systems (Pre).
[    2.453197] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    2.710926] fuse init (API version 7.26)
[    2.746425] i2c /dev entries driver
[    3.144620] systemd-udevd[146]: starting version 215
[    3.556117] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    3.801437] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    3.850469] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.4/input2
[    3.897347] usbcore: registered new interface driver brcmfmac
[    4.048032] input: Logitech K400 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404B.0004/input/input0
[    4.050700] logitech-hidpp-device 0003:046D:404B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-3f980000.usb-1.4:1
[    4.082850] brcmfmac: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    4.498595] systemd-journald[142]: Received request to flush runtime journal from PID 1
[    5.382345] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.382369] brcmfmac: power management disabled
[    5.941746] uart-pl011 3f201000.serial: no DMA platform data
[    6.192347] Adding 102396k swap on /var/swap.  Priority:-1 extents:4 across:167932k SSFS
[    6.466917] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    8.078719] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   10.338523] Bluetooth: Core ver 2.22
[   10.338579] NET: Registered protocol family 31
[   10.338582] Bluetooth: HCI device and connection manager initialized
[   10.338595] Bluetooth: HCI socket layer initialized
[   10.338604] Bluetooth: L2CAP socket layer initialized
[   10.338623] Bluetooth: SCO socket layer initialized
[   10.347168] Bluetooth: HCI UART driver ver 2.3
[   10.347175] Bluetooth: HCI UART protocol H4 registered
[   10.347178] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.347277] Bluetooth: HCI UART protocol Broadcom registered
[   10.506836] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.506843] Bluetooth: BNEP filters: protocol multicast
[   10.506854] Bluetooth: BNEP socket layer initialized
[   19.891888] random: crng init done