2020-01-21 05:17:25,305 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 17:01:11,102 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 17:06:35,809 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 17:18:45,002 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 17:24:47,983 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 17:37:36,495 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 19:30:53,140 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-01-25 19:35:35,064 - Enabling serial logging
2020-01-25 19:35:35,718 - Recv:  T:21.45 /0.00 B:23.75 /0.00 @:0 B@:0
2020-01-25 19:35:37,609 - Recv:  T:22.19 /0.00 B:22.81 /0.00 @:0 B@:0
2020-01-25 19:35:39,609 - Recv:  T:22.38 /0.00 B:22.81 /0.00 @:0 B@:0
2020-01-25 19:35:41,608 - Recv:  T:20.78 /0.00 B:22.30 /0.00 @:0 B@:0
2020-01-25 19:35:43,610 - Recv:  T:20.35 /0.00 B:22.62 /0.00 @:0 B@:0
2020-01-25 19:35:45,331 - Send: M111 S247
2020-01-25 19:35:45,351 - Recv: echo:DEBUG:ECHO,INFO,ERRORS,COMMUNICATION,LEVELING
2020-01-25 19:35:45,356 - Recv: ok
2020-01-25 19:35:45,609 - Recv:  T:21.48 /0.00 B:23.16 /0.00 @:0 B@:0
2020-01-25 19:35:47,609 - Recv:  T:21.60 /0.00 B:23.36 /0.00 @:0 B@:0
2020-01-25 19:35:49,608 - Recv:  T:21.09 /0.00 B:23.32 /0.00 @:0 B@:0
2020-01-25 19:35:50,025 - Send: G28
2020-01-25 19:35:50,043 - Recv: echo:G28
2020-01-25 19:35:50,049 - Recv: >>> G28
2020-01-25 19:35:50,053 - Recv: Machine Type: Cartesian
2020-01-25 19:35:50,058 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:35:50,066 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:35:50,070 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:35:50,076 - Recv:  (disabled)
2020-01-25 19:35:50,080 - Recv:
2020-01-25 19:35:50,084 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:35:50,088 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z5.00
2020-01-25 19:35:50,093 - Recv: <<< do_blocking_move_to
2020-01-25 19:35:51,619 - Recv:  T:21.17 /0.00 B:23.36 /0.00 @:0 B@:0
2020-01-25 19:35:52,030 - Recv: echo:busy: processing
2020-01-25 19:35:53,395 - Recv: >>> homeaxis(X)
2020-01-25 19:35:53,399 - Recv: Home 1 Fast:
2020-01-25 19:35:53,410 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 19:35:53,618 - Recv:  T:22.34 /0.00 B:21.80 /0.00 @:0 B@:0
2020-01-25 19:35:54,030 - Recv: echo:busy: processing
2020-01-25 19:35:54,212 - Recv: <<< do_homing_move(X)
2020-01-25 19:35:54,217 - Recv: Move Away:
2020-01-25 19:35:54,221 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 19:35:54,460 - Recv: <<< do_homing_move(X)
2020-01-25 19:35:54,465 - Recv: Home 2 Slow:
2020-01-25 19:35:54,470 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 19:35:54,782 - Recv: <<< do_homing_move(X)
2020-01-25 19:35:54,787 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 19:35:54,792 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 19:35:54,797 - Recv: > home_offset[X] = 0.00
2020-01-25 19:35:54,801 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:35:54,805 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 19:35:54,810 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:35:54,813 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:35:54,818 - Recv: <<< homeaxis(X)
2020-01-25 19:35:54,822 - Recv: >>> homeaxis(Y)
2020-01-25 19:35:54,826 - Recv: Home 1 Fast:
2020-01-25 19:35:54,830 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 19:35:54,906 - Recv: <<< do_homing_move(Y)
2020-01-25 19:35:54,911 - Recv: Move Away:
2020-01-25 19:35:54,914 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 19:35:55,154 - Recv: <<< do_homing_move(Y)
2020-01-25 19:35:55,159 - Recv: Home 2 Slow:
2020-01-25 19:35:55,163 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 19:35:55,475 - Recv: <<< do_homing_move(Y)
2020-01-25 19:35:55,479 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 19:35:55,484 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 19:35:55,488 - Recv: > home_offset[Y] = 0.00
2020-01-25 19:35:55,494 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:35:55,498 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 19:35:55,502 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:35:55,505 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:35:55,509 - Recv: <<< homeaxis(Y)
2020-01-25 19:35:55,513 - Recv: home_z_safely >>>
2020-01-25 19:35:55,517 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:35:55,522 - Recv:   destination= X194.00 Y160.00 Z5.00 : home_z_safely
2020-01-25 19:35:55,528 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:35:55,533 - Recv: <<< do_blocking_move_to
2020-01-25 19:35:55,626 - Recv:  T:21.64 /0.00 B:23.24 /0.00 @:0 B@:0
2020-01-25 19:35:56,030 - Recv: echo:busy: processing
2020-01-25 19:35:57,238 - Recv: >>> homeaxis(Z)
2020-01-25 19:35:57,246 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 19:35:57,253 - Recv: deploy: 1
2020-01-25 19:35:57,258 - Recv: do_probe_raise(5.00)
2020-01-25 19:35:57,261 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:35:57,265 - Recv: <<< do_blocking_move_to
2020-01-25 19:35:57,277 - Recv: Home 1 Fast:
2020-01-25 19:35:57,293 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 19:35:57,616 - Recv:  T:21.56 /0.00 B:22.70 /0.00 @:0 B@:0
2020-01-25 19:35:58,029 - Recv: echo:busy: processing
2020-01-25 19:35:58,053 - Recv: <<< do_homing_move(Z)
2020-01-25 19:35:58,056 - Recv: Move Away:
2020-01-25 19:35:58,058 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 19:35:58,598 - Recv: <<< do_homing_move(Z)
2020-01-25 19:35:58,603 - Recv: Home 2 Slow:
2020-01-25 19:35:58,609 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 19:35:59,489 - Recv: <<< do_homing_move(Z)
2020-01-25 19:35:59,495 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 19:35:59,499 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 19:35:59,503 - Recv: > probe_offset.z = 0.00
2020-01-25 19:35:59,507 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 19:35:59,511 - Recv: > home_offset[Z] = 0.00
2020-01-25 19:35:59,516 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 19:35:59,519 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 19:35:59,523 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 19:35:59,527 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 19:35:59,531 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 19:35:59,534 - Recv: deploy: 0
2020-01-25 19:35:59,538 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 19:35:59,542 - Recv: <<< do_blocking_move_to
2020-01-25 19:35:59,545 - Recv: <<< homeaxis(Z)
2020-01-25 19:35:59,548 - Recv: <<< home_z_safely
2020-01-25 19:35:59,551 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:35:59,555 - Recv: <<< do_blocking_move_to
2020-01-25 19:35:59,617 - Recv:  T:20.98 /0.00 B:22.93 /0.00 @:0 B@:0
2020-01-25 19:36:00,035 - Recv: echo:busy: processing
2020-01-25 19:36:00,306 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:36:00,311 - Recv: X:194.00 Y:160.00 Z:5.00 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 19:36:00,315 - Recv: <<< G28
2020-01-25 19:36:00,319 - Recv: ok
2020-01-25 19:36:01,624 - Recv:  T:21.25 /0.00 B:22.85 /0.00 @:0 B@:0
2020-01-25 19:36:03,538 - Send: G29
2020-01-25 19:36:03,555 - Recv: echo:G29
2020-01-25 19:36:03,560 - Recv:   current_position= X194.00 Y160.00 Z5.00 : >>> G29
2020-01-25 19:36:03,567 - Recv: Machine Type: Cartesian
2020-01-25 19:36:03,572 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:36:03,580 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:36:03,586 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:36:03,590 - Recv:  (disabled)
2020-01-25 19:36:03,593 - Recv:
2020-01-25 19:36:03,596 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 19:36:03,598 - Recv: deploy: 1
2020-01-25 19:36:03,602 - Recv: do_probe_raise(5.00)
2020-01-25 19:36:03,609 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:36:03,614 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:03,619 - Recv: reset_bed_level
2020-01-25 19:36:03,621 - Recv: >>> probe_at_point(15.00, 15.00, raise, 0, probe_relative)
2020-01-25 19:36:03,623 - Recv:   current_position= X194.00 Y160.00 Z5.00 :
2020-01-25 19:36:03,625 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z5.00
2020-01-25 19:36:03,627 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:03,629 - Recv:  T:21.29 /0.00 B:23.16 /0.00 @:0 B@:0
2020-01-25 19:36:04,971 - Recv:   current_position= X59.00 Y25.00 Z5.00 : set_probe_deployed
2020-01-25 19:36:04,983 - Recv: deploy: 1
2020-01-25 19:36:04,986 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> run_z_probe
2020-01-25 19:36:04,990 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> do_probe_move
2020-01-25 19:36:05,004 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 19:36:05,008 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:05,558 - Recv: echo:busy: processing
2020-01-25 19:36:05,617 - Recv:  T:21.02 /0.00 B:21.68 /0.00 @:0 B@:0
2020-01-25 19:36:05,770 - Recv:   current_position= X59.00 Y25.00 Z0.06 : sync_plan_position
2020-01-25 19:36:05,775 - Recv:   current_position= X59.00 Y25.00 Z0.06 : <<< do_probe_move
2020-01-25 19:36:05,780 - Recv: 1st Probe Z:0.06
2020-01-25 19:36:05,783 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.06
2020-01-25 19:36:05,787 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:06,321 - Recv:   current_position= X59.00 Y25.00 Z3.06 : >>> do_probe_move
2020-01-25 19:36:06,349 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 19:36:06,353 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:07,209 - Recv:   current_position= X59.00 Y25.00 Z0.15 : sync_plan_position
2020-01-25 19:36:07,216 - Recv:   current_position= X59.00 Y25.00 Z0.15 : <<< do_probe_move
2020-01-25 19:36:07,221 - Recv: 2nd Probe Z:0.15 Discrepancy:-0.09
2020-01-25 19:36:07,224 - Recv:   current_position= X59.00 Y25.00 Z0.15 : <<< run_z_probe
2020-01-25 19:36:07,228 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.15
2020-01-25 19:36:07,233 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:07,555 - Recv: echo:busy: processing
2020-01-25 19:36:07,618 - Recv:  T:20.66 /0.00 B:22.19 /0.00 @:0 B@:0
2020-01-25 19:36:07,756 - Recv: <<< probe_at_point
2020-01-25 19:36:07,760 - Recv: >>> probe_at_point(135.50, 15.00, raise, 0, probe_relative)
2020-01-25 19:36:07,765 - Recv:   current_position= X59.00 Y25.00 Z3.15 :
2020-01-25 19:36:07,769 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z3.15
2020-01-25 19:36:07,773 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:08,726 - Recv:   current_position= X179.50 Y25.00 Z3.15 : set_probe_deployed
2020-01-25 19:36:08,731 - Recv: deploy: 1
2020-01-25 19:36:08,739 - Recv:   current_position= X179.50 Y25.00 Z3.15 : >>> run_z_probe
2020-01-25 19:36:08,745 - Recv:   current_position= X179.50 Y25.00 Z3.15 : >>> do_probe_move
2020-01-25 19:36:08,761 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 19:36:08,765 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:09,341 - Recv:   current_position= X179.50 Y25.00 Z-0.29 : sync_plan_position
2020-01-25 19:36:09,347 - Recv:   current_position= X179.50 Y25.00 Z-0.29 : <<< do_probe_move
2020-01-25 19:36:09,353 - Recv: 1st Probe Z:-0.29
2020-01-25 19:36:09,355 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.71
2020-01-25 19:36:09,358 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:09,556 - Recv: echo:busy: processing
2020-01-25 19:36:09,617 - Recv:  T:21.56 /0.00 B:22.42 /0.00 @:0 B@:0
2020-01-25 19:36:09,892 - Recv:   current_position= X179.50 Y25.00 Z2.71 : >>> do_probe_move
2020-01-25 19:36:09,919 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 19:36:09,921 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:10,776 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : sync_plan_position
2020-01-25 19:36:10,784 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : <<< do_probe_move
2020-01-25 19:36:10,791 - Recv: 2nd Probe Z:-0.21 Discrepancy:-0.09
2020-01-25 19:36:10,795 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : <<< run_z_probe
2020-01-25 19:36:10,799 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.79
2020-01-25 19:36:10,803 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:11,329 - Recv: <<< probe_at_point
2020-01-25 19:36:11,347 - Recv: >>> probe_at_point(256.00, 15.00, raise, 0, probe_relative)
2020-01-25 19:36:11,351 - Recv:   current_position= X179.50 Y25.00 Z2.79 :
2020-01-25 19:36:11,356 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.79
2020-01-25 19:36:11,360 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:11,555 - Recv: echo:busy: processing
2020-01-25 19:36:11,619 - Recv:  T:21.52 /0.00 B:22.97 /0.00 @:0 B@:0
2020-01-25 19:36:12,316 - Recv:   current_position= X300.00 Y25.00 Z2.79 : set_probe_deployed
2020-01-25 19:36:12,326 - Recv: deploy: 1
2020-01-25 19:36:12,330 - Recv:   current_position= X300.00 Y25.00 Z2.79 : >>> run_z_probe
2020-01-25 19:36:12,334 - Recv:   current_position= X300.00 Y25.00 Z2.79 : >>> do_probe_move
2020-01-25 19:36:12,350 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 19:36:12,354 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:12,934 - Recv:   current_position= X300.00 Y25.00 Z-0.68 : sync_plan_position
2020-01-25 19:36:12,939 - Recv:   current_position= X300.00 Y25.00 Z-0.68 : <<< do_probe_move
2020-01-25 19:36:12,943 - Recv: 1st Probe Z:-0.68
2020-01-25 19:36:12,947 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.32
2020-01-25 19:36:12,952 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:13,484 - Recv:   current_position= X300.00 Y25.00 Z2.32 : >>> do_probe_move
2020-01-25 19:36:13,511 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 19:36:13,514 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:13,555 - Recv: echo:busy: processing
2020-01-25 19:36:13,616 - Recv:  T:21.41 /0.00 B:23.20 /0.00 @:0 B@:0
2020-01-25 19:36:14,366 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : sync_plan_position
2020-01-25 19:36:14,373 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : <<< do_probe_move
2020-01-25 19:36:14,381 - Recv: 2nd Probe Z:-0.59 Discrepancy:-0.09
2020-01-25 19:36:14,386 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : <<< run_z_probe
2020-01-25 19:36:14,392 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.41
2020-01-25 19:36:14,396 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:14,919 - Recv: <<< probe_at_point
2020-01-25 19:36:14,924 - Recv: >>> probe_at_point(256.00, 150.00, raise, 0, probe_relative)
2020-01-25 19:36:14,928 - Recv:   current_position= X300.00 Y25.00 Z2.41 :
2020-01-25 19:36:14,933 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.41
2020-01-25 19:36:14,936 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:15,567 - Recv: echo:busy: processing
2020-01-25 19:36:15,618 - Recv:  T:21.68 /0.00 B:23.87 /0.00 @:0 B@:0
2020-01-25 19:36:15,977 - Recv:   current_position= X300.00 Y160.00 Z2.41 : set_probe_deployed
2020-01-25 19:36:15,981 - Recv: deploy: 1
2020-01-25 19:36:15,986 - Recv:   current_position= X300.00 Y160.00 Z2.41 : >>> run_z_probe
2020-01-25 19:36:15,989 - Recv:   current_position= X300.00 Y160.00 Z2.41 : >>> do_probe_move
2020-01-25 19:36:16,011 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 19:36:16,015 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:16,509 - Recv:   current_position= X300.00 Y160.00 Z-0.38 : sync_plan_position
2020-01-25 19:36:16,514 - Recv:   current_position= X300.00 Y160.00 Z-0.38 : <<< do_probe_move
2020-01-25 19:36:16,518 - Recv: 1st Probe Z:-0.38
2020-01-25 19:36:16,523 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.62
2020-01-25 19:36:16,526 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:17,061 - Recv:   current_position= X300.00 Y160.00 Z2.62 : >>> do_probe_move
2020-01-25 19:36:17,089 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 19:36:17,094 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:17,564 - Recv: echo:busy: processing
2020-01-25 19:36:17,621 - Recv:  T:20.66 /0.00 B:23.01 /0.00 @:0 B@:0
2020-01-25 19:36:17,946 - Recv:   current_position= X300.00 Y160.00 Z-0.30 : sync_plan_position
2020-01-25 19:36:17,951 - Recv:   current_position= X300.00 Y160.00 Z-0.30 : <<< do_probe_move
2020-01-25 19:36:17,955 - Recv: 2nd Probe Z:-0.30 Discrepancy:-0.08
2020-01-25 19:36:17,960 - Recv:   current_position= X300.00 Y160.00 Z-0.30 : <<< run_z_probe
2020-01-25 19:36:17,965 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.70
2020-01-25 19:36:17,968 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:18,499 - Recv: <<< probe_at_point
2020-01-25 19:36:18,503 - Recv: >>> probe_at_point(135.50, 150.00, raise, 0, probe_relative)
2020-01-25 19:36:18,508 - Recv:   current_position= X300.00 Y160.00 Z2.70 :
2020-01-25 19:36:18,512 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.70
2020-01-25 19:36:18,516 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:19,469 - Recv:   current_position= X179.50 Y160.00 Z2.70 : set_probe_deployed
2020-01-25 19:36:19,476 - Recv: deploy: 1
2020-01-25 19:36:19,485 - Recv:   current_position= X179.50 Y160.00 Z2.70 : >>> run_z_probe
2020-01-25 19:36:19,489 - Recv:   current_position= X179.50 Y160.00 Z2.70 : >>> do_probe_move
2020-01-25 19:36:19,504 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 19:36:19,508 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:19,564 - Recv: echo:busy: processing
2020-01-25 19:36:19,620 - Recv:  T:21.76 /0.00 B:22.19 /0.00 @:0 B@:0
2020-01-25 19:36:19,995 - Recv:   current_position= X179.50 Y160.00 Z-0.04 : sync_plan_position
2020-01-25 19:36:20,000 - Recv:   current_position= X179.50 Y160.00 Z-0.04 : <<< do_probe_move
2020-01-25 19:36:20,004 - Recv: 1st Probe Z:-0.04
2020-01-25 19:36:20,008 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.96
2020-01-25 19:36:20,012 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:20,547 - Recv:   current_position= X179.50 Y160.00 Z2.96 : >>> do_probe_move
2020-01-25 19:36:20,573 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 19:36:20,577 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:21,431 - Recv:   current_position= X179.50 Y160.00 Z0.04 : sync_plan_position
2020-01-25 19:36:21,436 - Recv:   current_position= X179.50 Y160.00 Z0.04 : <<< do_probe_move
2020-01-25 19:36:21,441 - Recv: 2nd Probe Z:0.04 Discrepancy:-0.08
2020-01-25 19:36:21,445 - Recv:   current_position= X179.50 Y160.00 Z0.04 : <<< run_z_probe
2020-01-25 19:36:21,449 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z3.04
2020-01-25 19:36:21,452 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:21,564 - Recv: echo:busy: processing
2020-01-25 19:36:21,621 - Recv:  T:21.91 /0.00 B:22.66 /0.00 @:0 B@:0
2020-01-25 19:36:21,984 - Recv: <<< probe_at_point
2020-01-25 19:36:21,989 - Recv: >>> probe_at_point(15.00, 150.00, raise, 0, probe_relative)
2020-01-25 19:36:21,993 - Recv:   current_position= X179.50 Y160.00 Z3.04 :
2020-01-25 19:36:21,998 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.04
2020-01-25 19:36:22,002 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:22,969 - Recv:   current_position= X59.00 Y160.00 Z3.04 : set_probe_deployed
2020-01-25 19:36:22,979 - Recv: deploy: 1
2020-01-25 19:36:22,984 - Recv:   current_position= X59.00 Y160.00 Z3.04 : >>> run_z_probe
2020-01-25 19:36:22,988 - Recv:   current_position= X59.00 Y160.00 Z3.04 : >>> do_probe_move
2020-01-25 19:36:23,002 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 19:36:23,006 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:23,499 - Recv:   current_position= X59.00 Y160.00 Z0.26 : sync_plan_position
2020-01-25 19:36:23,504 - Recv:   current_position= X59.00 Y160.00 Z0.26 : <<< do_probe_move
2020-01-25 19:36:23,508 - Recv: 1st Probe Z:0.26
2020-01-25 19:36:23,513 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.26
2020-01-25 19:36:23,516 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:23,565 - Recv: echo:busy: processing
2020-01-25 19:36:23,621 - Recv:  T:21.60 /0.00 B:23.09 /0.00 @:0 B@:0
2020-01-25 19:36:24,050 - Recv:   current_position= X59.00 Y160.00 Z3.26 : >>> do_probe_move
2020-01-25 19:36:24,077 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 19:36:24,081 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:24,936 - Recv:   current_position= X59.00 Y160.00 Z0.34 : sync_plan_position
2020-01-25 19:36:24,940 - Recv:   current_position= X59.00 Y160.00 Z0.34 : <<< do_probe_move
2020-01-25 19:36:24,944 - Recv: 2nd Probe Z:0.34 Discrepancy:-0.08
2020-01-25 19:36:24,950 - Recv:   current_position= X59.00 Y160.00 Z0.34 : <<< run_z_probe
2020-01-25 19:36:24,954 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.34
2020-01-25 19:36:24,957 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:25,488 - Recv: <<< probe_at_point
2020-01-25 19:36:25,493 - Recv: >>> probe_at_point(15.00, 285.00, raise, 0, probe_relative)
2020-01-25 19:36:25,498 - Recv:   current_position= X59.00 Y160.00 Z3.34 :
2020-01-25 19:36:25,501 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.34
2020-01-25 19:36:25,511 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:25,564 - Recv: echo:busy: processing
2020-01-25 19:36:25,620 - Recv:  T:21.45 /0.00 B:23.79 /0.00 @:0 B@:0
2020-01-25 19:36:26,545 - Recv:   current_position= X59.00 Y295.00 Z3.34 : set_probe_deployed
2020-01-25 19:36:26,555 - Recv: deploy: 1
2020-01-25 19:36:26,559 - Recv:   current_position= X59.00 Y295.00 Z3.34 : >>> run_z_probe
2020-01-25 19:36:26,566 - Recv:   current_position= X59.00 Y295.00 Z3.34 : >>> do_probe_move
2020-01-25 19:36:26,580 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 19:36:26,584 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:27,075 - Recv:   current_position= X59.00 Y295.00 Z0.55 : sync_plan_position
2020-01-25 19:36:27,080 - Recv:   current_position= X59.00 Y295.00 Z0.55 : <<< do_probe_move
2020-01-25 19:36:27,084 - Recv: 1st Probe Z:0.55
2020-01-25 19:36:27,089 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.55
2020-01-25 19:36:27,093 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:27,564 - Recv: echo:busy: processing
2020-01-25 19:36:27,620 - Recv:  T:21.21 /0.00 B:22.46 /0.00 @:0 B@:0
2020-01-25 19:36:27,640 - Recv:   current_position= X59.00 Y295.00 Z3.55 : >>> do_probe_move
2020-01-25 19:36:27,654 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 19:36:27,658 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:28,513 - Recv:   current_position= X59.00 Y295.00 Z0.63 : sync_plan_position
2020-01-25 19:36:28,518 - Recv:   current_position= X59.00 Y295.00 Z0.63 : <<< do_probe_move
2020-01-25 19:36:28,523 - Recv: 2nd Probe Z:0.63 Discrepancy:-0.08
2020-01-25 19:36:28,527 - Recv:   current_position= X59.00 Y295.00 Z0.63 : <<< run_z_probe
2020-01-25 19:36:28,531 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.63
2020-01-25 19:36:28,536 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:29,065 - Recv: <<< probe_at_point
2020-01-25 19:36:29,069 - Recv: >>> probe_at_point(135.50, 285.00, raise, 0, probe_relative)
2020-01-25 19:36:29,074 - Recv:   current_position= X59.00 Y295.00 Z3.63 :
2020-01-25 19:36:29,079 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.63
2020-01-25 19:36:29,082 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:29,564 - Recv: echo:busy: processing
2020-01-25 19:36:29,621 - Recv:  T:21.48 /0.00 B:22.42 /0.00 @:0 B@:0
2020-01-25 19:36:30,035 - Recv:   current_position= X179.50 Y295.00 Z3.63 : set_probe_deployed
2020-01-25 19:36:30,039 - Recv: deploy: 1
2020-01-25 19:36:30,044 - Recv:   current_position= X179.50 Y295.00 Z3.63 : >>> run_z_probe
2020-01-25 19:36:30,048 - Recv:   current_position= X179.50 Y295.00 Z3.63 : >>> do_probe_move
2020-01-25 19:36:30,069 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 19:36:30,073 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:30,647 - Recv:   current_position= X179.50 Y295.00 Z0.20 : sync_plan_position
2020-01-25 19:36:30,658 - Recv:   current_position= X179.50 Y295.00 Z0.20 : <<< do_probe_move
2020-01-25 19:36:30,663 - Recv: 1st Probe Z:0.20
2020-01-25 19:36:30,667 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.20
2020-01-25 19:36:30,671 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:31,198 - Recv:   current_position= X179.50 Y295.00 Z3.20 : >>> do_probe_move
2020-01-25 19:36:31,226 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 19:36:31,230 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:31,564 - Recv: echo:busy: processing
2020-01-25 19:36:31,620 - Recv:  T:21.84 /0.00 B:22.58 /0.00 @:0 B@:0
2020-01-25 19:36:32,083 - Recv:   current_position= X179.50 Y295.00 Z0.28 : sync_plan_position
2020-01-25 19:36:32,088 - Recv:   current_position= X179.50 Y295.00 Z0.28 : <<< do_probe_move
2020-01-25 19:36:32,092 - Recv: 2nd Probe Z:0.28 Discrepancy:-0.08
2020-01-25 19:36:32,097 - Recv:   current_position= X179.50 Y295.00 Z0.28 : <<< run_z_probe
2020-01-25 19:36:32,101 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.28
2020-01-25 19:36:32,105 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:32,635 - Recv: <<< probe_at_point
2020-01-25 19:36:32,640 - Recv: >>> probe_at_point(256.00, 285.00, raise, 0, probe_relative)
2020-01-25 19:36:32,645 - Recv:   current_position= X179.50 Y295.00 Z3.28 :
2020-01-25 19:36:32,649 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z3.28
2020-01-25 19:36:32,654 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:33,565 - Recv: echo:busy: processing
2020-01-25 19:36:33,606 - Recv:   current_position= X300.00 Y295.00 Z3.28 : set_probe_deployed
2020-01-25 19:36:33,611 - Recv: deploy: 1
2020-01-25 19:36:33,616 - Recv:   current_position= X300.00 Y295.00 Z3.28 : >>> run_z_probe
2020-01-25 19:36:33,619 - Recv:   current_position= X300.00 Y295.00 Z3.28 : >>> do_probe_move
2020-01-25 19:36:33,641 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 19:36:33,645 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:33,650 - Recv:  T:20.82 /0.00 B:22.97 /0.00 @:0 B@:0
2020-01-25 19:36:34,220 - Recv:   current_position= X300.00 Y295.00 Z-0.17 : sync_plan_position
2020-01-25 19:36:34,225 - Recv:   current_position= X300.00 Y295.00 Z-0.17 : <<< do_probe_move
2020-01-25 19:36:34,229 - Recv: 1st Probe Z:-0.17
2020-01-25 19:36:34,234 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.83
2020-01-25 19:36:34,238 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:34,772 - Recv:   current_position= X300.00 Y295.00 Z2.83 : >>> do_probe_move
2020-01-25 19:36:34,800 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 19:36:34,805 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:35,564 - Recv: echo:busy: processing
2020-01-25 19:36:35,648 - Recv:  T:21.48 /0.00 B:22.62 /0.00 @:0 B@:0
2020-01-25 19:36:35,668 - Recv:   current_position= X300.00 Y295.00 Z-0.09 : sync_plan_position
2020-01-25 19:36:35,673 - Recv:   current_position= X300.00 Y295.00 Z-0.09 : <<< do_probe_move
2020-01-25 19:36:35,677 - Recv: 2nd Probe Z:-0.09 Discrepancy:-0.08
2020-01-25 19:36:35,681 - Recv:   current_position= X300.00 Y295.00 Z-0.09 : <<< run_z_probe
2020-01-25 19:36:35,685 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.91
2020-01-25 19:36:35,689 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:36,216 - Recv: <<< probe_at_point
2020-01-25 19:36:36,221 - Recv:   current_position= X300.00 Y295.00 Z2.91 : set_probe_deployed
2020-01-25 19:36:36,225 - Recv: deploy: 0
2020-01-25 19:36:36,230 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.91
2020-01-25 19:36:36,235 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:36,239 - Recv:   current_position= X300.00 Y295.00 Z2.91 : > probing complete
2020-01-25 19:36:36,243 - Recv: Extrapolate [ 1+  1+]
2020-01-25 19:36:36,248 - Recv:  (done)
2020-01-25 19:36:36,253 - Recv: Extrapolate [ 1-  1+]
2020-01-25 19:36:36,257 - Recv:  (done)
2020-01-25 19:36:36,261 - Recv: Extrapolate [ 1+  1-]
2020-01-25 19:36:36,266 - Recv:  (done)
2020-01-25 19:36:36,269 - Recv: Extrapolate [ 1-  1-]
2020-01-25 19:36:36,273 - Recv:  (done)
2020-01-25 19:36:36,277 - Recv: Extrapolate [ 1+  0+]
2020-01-25 19:36:36,281 - Recv:  (done)
2020-01-25 19:36:36,285 - Recv: Extrapolate [ 1-  0+]
2020-01-25 19:36:36,290 - Recv:  (done)
2020-01-25 19:36:36,294 - Recv: Extrapolate [ 1+  2-]
2020-01-25 19:36:36,298 - Recv:  (done)
2020-01-25 19:36:36,302 - Recv: Extrapolate [ 1-  2-]
2020-01-25 19:36:36,307 - Recv:  (done)
2020-01-25 19:36:36,311 - Recv: Extrapolate [ 0+  1+]
2020-01-25 19:36:36,315 - Recv:  (done)
2020-01-25 19:36:36,319 - Recv: Extrapolate [ 2-  1+]
2020-01-25 19:36:36,323 - Recv:  (done)
2020-01-25 19:36:36,326 - Recv: Extrapolate [ 0+  1-]
2020-01-25 19:36:36,329 - Recv:  (done)
2020-01-25 19:36:36,334 - Recv: Extrapolate [ 2-  1-]
2020-01-25 19:36:36,338 - Recv:  (done)
2020-01-25 19:36:36,343 - Recv: Extrapolate [ 0+  0+]
2020-01-25 19:36:36,347 - Recv:  (done)
2020-01-25 19:36:36,351 - Recv: Extrapolate [ 2-  0+]
2020-01-25 19:36:36,354 - Recv:  (done)
2020-01-25 19:36:36,357 - Recv: Extrapolate [ 0+  2-]
2020-01-25 19:36:36,361 - Recv:  (done)
2020-01-25 19:36:36,366 - Recv: Extrapolate [ 2-  2-]
2020-01-25 19:36:36,368 - Recv:  (done)
2020-01-25 19:36:36,371 - Recv: Bilinear Leveling Grid:
2020-01-25 19:36:36,373 - Recv:       0      1      2
2020-01-25 19:36:36,374 - Recv:  0 +0.113 -0.242 -0.625
2020-01-25 19:36:36,376 - Recv:  1 +0.307 +0.008 -0.329
2020-01-25 19:36:36,378 - Recv:  2 +0.599 +0.248 -0.122
2020-01-25 19:36:36,381 - Recv:
2020-01-25 19:36:36,383 - Recv: G29 uncorrected Z:2.91
2020-01-25 19:36:36,386 - Recv:  corrected Z:3.03
2020-01-25 19:36:36,388 - Recv: <<< G29
2020-01-25 19:36:36,390 - Recv:   current_position= X300.00 Y295.00 Z3.03 : sync_plan_position
2020-01-25 19:36:36,392 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 19:36:36,394 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:36,671 - Recv: X:300.00 Y:295.00 Z:5.00 E:0.00 Count X:30000 Y:29500 Z:1951
2020-01-25 19:36:36,676 - Recv: ok
2020-01-25 19:36:37,649 - Recv:  T:21.72 /0.00 B:22.42 /0.00 @:0 B@:0
2020-01-25 19:36:39,648 - Recv:  T:21.64 /0.00 B:22.97 /0.00 @:0 B@:0
2020-01-25 19:36:41,648 - Recv:  T:21.56 /0.00 B:22.89 /0.00 @:0 B@:0
2020-01-25 19:36:43,648 - Recv:  T:21.56 /0.00 B:23.36 /0.00 @:0 B@:0
2020-01-25 19:36:45,648 - Recv:  T:21.21 /0.00 B:22.50 /0.00 @:0 B@:0
2020-01-25 19:36:47,648 - Recv:  T:21.05 /0.00 B:22.54 /0.00 @:0 B@:0
2020-01-25 19:36:49,649 - Recv:  T:21.68 /0.00 B:22.93 /0.00 @:0 B@:0
2020-01-25 19:36:51,648 - Recv:  T:21.13 /0.00 B:22.42 /0.00 @:0 B@:0
2020-01-25 19:36:53,648 - Recv:  T:21.17 /0.00 B:23.20 /0.00 @:0 B@:0
2020-01-25 19:36:55,647 - Recv:  T:21.13 /0.00 B:23.40 /0.00 @:0 B@:0
2020-01-25 19:36:56,181 - Send: G28
2020-01-25 19:36:56,189 - Recv: echo:G28
2020-01-25 19:36:56,196 - Recv: >>> G28
2020-01-25 19:36:56,200 - Recv: Machine Type: Cartesian
2020-01-25 19:36:56,205 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:36:56,209 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:36:56,214 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:36:56,218 - Recv:  (enabled)
2020-01-25 19:36:56,222 - Recv: ABL Adjustment Z-0.122
2020-01-25 19:36:56,227 - Recv:   current_position= X300.00 Y295.00 Z5.00 : Leveling ON
2020-01-25 19:36:56,231 - Recv:   current_position= X300.00 Y295.00 Z4.88 : ...Now OFF
2020-01-25 19:36:56,235 - Recv:   current_position= X300.00 Y295.00 Z4.88 : sync_plan_position
2020-01-25 19:36:56,239 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 19:36:56,242 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z4.88
2020-01-25 19:36:56,244 - Recv: <<< do_blocking_move_to
2020-01-25 19:36:57,648 - Recv:  T:21.05 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:36:58,187 - Recv: echo:busy: processing
2020-01-25 19:36:59,665 - Recv:  T:20.47 /0.00 B:23.09 /0.00 @:0 B@:0
2020-01-25 19:37:00,188 - Recv: echo:busy: processing
2020-01-25 19:37:01,664 - Recv:  T:21.56 /0.00 B:23.32 /0.00 @:0 B@:0
2020-01-25 19:37:02,188 - Recv: echo:busy: processing
2020-01-25 19:37:02,268 - Recv: >>> homeaxis(X)
2020-01-25 19:37:02,272 - Recv: Home 1 Fast:
2020-01-25 19:37:02,275 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 19:37:02,503 - Recv: <<< do_homing_move(X)
2020-01-25 19:37:02,507 - Recv: Move Away:
2020-01-25 19:37:02,511 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 19:37:02,756 - Recv: <<< do_homing_move(X)
2020-01-25 19:37:02,761 - Recv: Home 2 Slow:
2020-01-25 19:37:02,764 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 19:37:03,078 - Recv: <<< do_homing_move(X)
2020-01-25 19:37:03,082 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 19:37:03,086 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 19:37:03,090 - Recv: > home_offset[X] = 0.00
2020-01-25 19:37:03,095 - Recv:   current_position= X0.00 Y0.00 Z4.88 :
2020-01-25 19:37:03,098 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 19:37:03,101 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 19:37:03,104 - Recv:   current_position= X0.00 Y0.00 Z4.88 : > AFTER set_axis_is_at_home
2020-01-25 19:37:03,108 - Recv: <<< homeaxis(X)
2020-01-25 19:37:03,111 - Recv: >>> homeaxis(Y)
2020-01-25 19:37:03,114 - Recv: Home 1 Fast:
2020-01-25 19:37:03,117 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 19:37:03,209 - Recv: <<< do_homing_move(Y)
2020-01-25 19:37:03,212 - Recv: Move Away:
2020-01-25 19:37:03,216 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 19:37:03,450 - Recv: <<< do_homing_move(Y)
2020-01-25 19:37:03,454 - Recv: Home 2 Slow:
2020-01-25 19:37:03,458 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 19:37:03,663 - Recv:  T:21.99 /0.00 B:23.87 /0.00 @:0 B@:0
2020-01-25 19:37:03,772 - Recv: <<< do_homing_move(Y)
2020-01-25 19:37:03,776 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 19:37:03,780 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 19:37:03,785 - Recv: > home_offset[Y] = 0.00
2020-01-25 19:37:03,788 - Recv:   current_position= X0.00 Y0.00 Z4.88 :
2020-01-25 19:37:03,793 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 19:37:03,797 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 19:37:03,800 - Recv:   current_position= X0.00 Y0.00 Z4.88 : > AFTER set_axis_is_at_home
2020-01-25 19:37:03,803 - Recv: <<< homeaxis(Y)
2020-01-25 19:37:03,807 - Recv: home_z_safely >>>
2020-01-25 19:37:03,811 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 19:37:03,814 - Recv:   destination= X194.00 Y160.00 Z4.88 : home_z_safely
2020-01-25 19:37:03,818 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.88
2020-01-25 19:37:03,823 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:04,188 - Recv: echo:busy: processing
2020-01-25 19:37:05,535 - Recv: >>> homeaxis(Z)
2020-01-25 19:37:05,547 - Recv:   current_position= X194.00 Y160.00 Z4.88 : set_probe_deployed
2020-01-25 19:37:05,550 - Recv: deploy: 1
2020-01-25 19:37:05,554 - Recv: do_probe_raise(5.00)
2020-01-25 19:37:05,558 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:37:05,562 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:05,662 - Recv:  T:21.09 /0.00 B:22.89 /0.00 @:0 B@:0
2020-01-25 19:37:05,706 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:37:05,710 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:05,715 - Recv: Home 1 Fast:
2020-01-25 19:37:05,719 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 19:37:06,187 - Recv: echo:busy: processing
2020-01-25 19:37:06,521 - Recv: <<< do_homing_move(Z)
2020-01-25 19:37:06,525 - Recv: Move Away:
2020-01-25 19:37:06,528 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 19:37:07,065 - Recv: <<< do_homing_move(Z)
2020-01-25 19:37:07,077 - Recv: Home 2 Slow:
2020-01-25 19:37:07,081 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 19:37:07,663 - Recv:  T:22.30 /0.00 B:22.46 /0.00 @:0 B@:0
2020-01-25 19:37:07,951 - Recv: <<< do_homing_move(Z)
2020-01-25 19:37:07,955 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 19:37:07,959 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 19:37:07,965 - Recv: > probe_offset.z = 0.00
2020-01-25 19:37:07,968 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 19:37:07,972 - Recv: > home_offset[Z] = 0.00
2020-01-25 19:37:07,976 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 19:37:07,981 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 19:37:07,986 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 19:37:07,990 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 19:37:07,994 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 19:37:07,997 - Recv: deploy: 0
2020-01-25 19:37:08,000 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 19:37:08,004 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:08,008 - Recv: <<< homeaxis(Z)
2020-01-25 19:37:08,011 - Recv: <<< home_z_safely
2020-01-25 19:37:08,015 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:37:08,019 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:08,187 - Recv: echo:busy: processing
2020-01-25 19:37:08,774 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:37:08,779 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 19:37:08,783 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 19:37:08,788 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 19:37:08,792 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 19:37:08,798 - Recv: <<< G28
2020-01-25 19:37:08,806 - Recv: ok
2020-01-25 19:37:09,664 - Recv:  T:21.41 /0.00 B:22.62 /0.00 @:0 B@:0
2020-01-25 19:37:11,664 - Recv:  T:20.62 /0.00 B:23.55 /0.00 @:0 B@:0
2020-01-25 19:37:13,663 - Recv:  T:21.64 /0.00 B:21.64 /0.00 @:0 B@:0
2020-01-25 19:37:15,663 - Recv:  T:20.74 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:37:17,664 - Recv:  T:21.45 /0.00 B:22.34 /0.00 @:0 B@:0
2020-01-25 19:37:19,663 - Recv:  T:21.60 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:37:21,663 - Recv:  T:21.09 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:37:23,662 - Recv:  T:21.64 /0.00 B:23.12 /0.00 @:0 B@:0
2020-01-25 19:37:25,666 - Recv:  T:20.94 /0.00 B:23.09 /0.00 @:0 B@:0
2020-01-25 19:37:27,663 - Recv:  T:21.45 /0.00 B:22.58 /0.00 @:0 B@:0
2020-01-25 19:37:29,663 - Recv:  T:21.52 /0.00 B:22.73 /0.00 @:0 B@:0
2020-01-25 19:37:31,662 - Recv:  T:21.02 /0.00 B:21.76 /0.00 @:0 B@:0
2020-01-25 19:37:33,663 - Recv:  T:21.64 /0.00 B:22.66 /0.00 @:0 B@:0
2020-01-25 19:37:35,662 - Recv:  T:21.05 /0.00 B:22.93 /0.00 @:0 B@:0
2020-01-25 19:37:37,662 - Recv:  T:20.90 /0.00 B:21.91 /0.00 @:0 B@:0
2020-01-25 19:37:39,661 - Recv:  T:21.25 /0.00 B:23.36 /0.00 @:0 B@:0
2020-01-25 19:37:41,663 - Recv:  T:21.21 /0.00 B:22.70 /0.00 @:0 B@:0
2020-01-25 19:37:43,662 - Recv:  T:21.52 /0.00 B:22.85 /0.00 @:0 B@:0
2020-01-25 19:37:45,662 - Recv:  T:20.86 /0.00 B:21.95 /0.00 @:0 B@:0
2020-01-25 19:37:47,663 - Recv:  T:20.74 /0.00 B:22.11 /0.00 @:0 B@:0
2020-01-25 19:37:49,666 - Recv:  T:21.33 /0.00 B:23.16 /0.00 @:0 B@:0
2020-01-25 19:37:51,666 - Recv:  T:21.95 /0.00 B:21.87 /0.00 @:0 B@:0
2020-01-25 19:37:51,965 - Send: NOTE: Z IS SHOWING 5.16MM ON THE LCD
2020-01-25 19:37:51,983 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 19:37:51,987 - Recv: Resend: 2
2020-01-25 19:37:52,000 - Recv: ok
2020-01-25 19:37:53,665 - Recv:  T:22.11 /0.00 B:22.19 /0.00 @:0 B@:0
2020-01-25 19:37:55,666 - Recv:  T:21.17 /0.00 B:22.70 /0.00 @:0 B@:0
2020-01-25 19:37:57,529 - Send: G28
2020-01-25 19:37:57,538 - Recv: echo:G28
2020-01-25 19:37:57,543 - Recv: >>> G28
2020-01-25 19:37:57,549 - Recv: Machine Type: Cartesian
2020-01-25 19:37:57,552 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:37:57,557 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:37:57,560 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:37:57,563 - Recv:  (enabled)
2020-01-25 19:37:57,565 - Recv: ABL Adjustment Z-0.139
2020-01-25 19:37:57,568 - Recv:   current_position= X194.00 Y160.00 Z5.14 : Leveling ON
2020-01-25 19:37:57,570 - Recv:   current_position= X194.00 Y160.00 Z5.00 : ...Now OFF
2020-01-25 19:37:57,573 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:37:57,575 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:37:57,578 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z5.00
2020-01-25 19:37:57,580 - Recv: <<< do_blocking_move_to
2020-01-25 19:37:57,665 - Recv:  T:20.74 /0.00 B:22.54 /0.00 @:0 B@:0
2020-01-25 19:37:59,537 - Recv: echo:busy: processing
2020-01-25 19:37:59,666 - Recv:  T:21.05 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:38:00,912 - Recv: >>> homeaxis(X)
2020-01-25 19:38:00,923 - Recv: Home 1 Fast:
2020-01-25 19:38:00,928 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 19:38:01,540 - Recv: echo:busy: processing
2020-01-25 19:38:01,666 - Recv:  T:20.90 /0.00 B:22.11 /0.00 @:0 B@:0
2020-01-25 19:38:01,728 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:01,733 - Recv: Move Away:
2020-01-25 19:38:01,737 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 19:38:01,976 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:01,981 - Recv: Home 2 Slow:
2020-01-25 19:38:01,985 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 19:38:02,298 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:02,303 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 19:38:02,307 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:02,312 - Recv: > home_offset[X] = 0.00
2020-01-25 19:38:02,317 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:38:02,321 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 19:38:02,324 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:02,329 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:02,333 - Recv: <<< homeaxis(X)
2020-01-25 19:38:02,337 - Recv: >>> homeaxis(Y)
2020-01-25 19:38:02,340 - Recv: Home 1 Fast:
2020-01-25 19:38:02,344 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 19:38:02,422 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:02,426 - Recv: Move Away:
2020-01-25 19:38:02,431 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 19:38:02,670 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:02,675 - Recv: Home 2 Slow:
2020-01-25 19:38:02,679 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 19:38:02,992 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:02,997 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 19:38:03,001 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:03,006 - Recv: > home_offset[Y] = 0.00
2020-01-25 19:38:03,011 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:38:03,015 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 19:38:03,020 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:03,023 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:03,026 - Recv: <<< homeaxis(Y)
2020-01-25 19:38:03,030 - Recv: home_z_safely >>>
2020-01-25 19:38:03,034 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:03,038 - Recv:   destination= X194.00 Y160.00 Z5.00 : home_z_safely
2020-01-25 19:38:03,041 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:03,044 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:03,539 - Recv: echo:busy: processing
2020-01-25 19:38:03,666 - Recv:  T:21.33 /0.00 B:21.56 /0.00 @:0 B@:0
2020-01-25 19:38:04,756 - Recv: >>> homeaxis(Z)
2020-01-25 19:38:04,766 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 19:38:04,771 - Recv: deploy: 1
2020-01-25 19:38:04,776 - Recv: do_probe_raise(5.00)
2020-01-25 19:38:04,780 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:04,784 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:04,788 - Recv: Home 1 Fast:
2020-01-25 19:38:04,791 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 19:38:05,538 - Recv: echo:busy: processing
2020-01-25 19:38:05,577 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:05,581 - Recv: Move Away:
2020-01-25 19:38:05,585 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 19:38:05,666 - Recv:  T:20.59 /0.00 B:23.09 /0.00 @:0 B@:0
2020-01-25 19:38:06,121 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:06,126 - Recv: Home 2 Slow:
2020-01-25 19:38:06,132 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 19:38:07,005 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:07,016 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 19:38:07,021 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 19:38:07,026 - Recv: > probe_offset.z = 0.00
2020-01-25 19:38:07,030 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:07,035 - Recv: > home_offset[Z] = 0.00
2020-01-25 19:38:07,040 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 19:38:07,044 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 19:38:07,046 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 19:38:07,048 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:07,051 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 19:38:07,054 - Recv: deploy: 0
2020-01-25 19:38:07,056 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 19:38:07,059 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:07,061 - Recv: <<< homeaxis(Z)
2020-01-25 19:38:07,063 - Recv: <<< home_z_safely
2020-01-25 19:38:07,065 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:07,068 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:07,539 - Recv: echo:busy: processing
2020-01-25 19:38:07,665 - Recv:  T:20.74 /0.00 B:21.87 /0.00 @:0 B@:0
2020-01-25 19:38:07,827 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:38:07,832 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 19:38:07,837 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 19:38:07,841 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 19:38:07,845 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 19:38:07,855 - Recv: <<< G28
2020-01-25 19:38:07,861 - Recv: ok
2020-01-25 19:38:09,665 - Recv:  T:20.51 /0.00 B:22.11 /0.00 @:0 B@:0
2020-01-25 19:38:11,665 - Recv:  T:21.72 /0.00 B:21.91 /0.00 @:0 B@:0
2020-01-25 19:38:13,666 - Recv:  T:20.62 /0.00 B:22.58 /0.00 @:0 B@:0
2020-01-25 19:38:15,666 - Recv:  T:20.82 /0.00 B:23.36 /0.00 @:0 B@:0
2020-01-25 19:38:17,668 - Recv:  T:21.37 /0.00 B:22.15 /0.00 @:0 B@:0
2020-01-25 19:38:19,669 - Recv:  T:21.21 /0.00 B:22.34 /0.00 @:0 B@:0
2020-01-25 19:38:21,668 - Recv:  T:21.29 /0.00 B:22.27 /0.00 @:0 B@:0
2020-01-25 19:38:23,668 - Recv:  T:21.33 /0.00 B:23.09 /0.00 @:0 B@:0
2020-01-25 19:38:25,667 - Recv:  T:21.02 /0.00 B:21.52 /0.00 @:0 B@:0
2020-01-25 19:38:27,668 - Recv:  T:21.45 /0.00 B:22.34 /0.00 @:0 B@:0
2020-01-25 19:38:28,010 - Send: NOTE: Z IS SHOWING 5.14MM ON THE LCD
2020-01-25 19:38:28,029 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 19:38:28,038 - Recv: Resend: 2
2020-01-25 19:38:28,046 - Recv: ok
2020-01-25 19:38:29,667 - Recv:  T:20.98 /0.00 B:21.99 /0.00 @:0 B@:0
2020-01-25 19:38:30,785 - Send: G28
2020-01-25 19:38:30,800 - Recv: echo:G28
2020-01-25 19:38:30,808 - Recv: >>> G28
2020-01-25 19:38:30,812 - Recv: Machine Type: Cartesian
2020-01-25 19:38:30,817 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:38:30,821 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:38:30,828 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:38:30,832 - Recv:  (enabled)
2020-01-25 19:38:30,837 - Recv: ABL Adjustment Z-0.139
2020-01-25 19:38:30,842 - Recv:   current_position= X194.00 Y160.00 Z5.14 : Leveling ON
2020-01-25 19:38:30,845 - Recv:   current_position= X194.00 Y160.00 Z5.00 : ...Now OFF
2020-01-25 19:38:30,850 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:38:30,854 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:30,858 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z5.00
2020-01-25 19:38:30,862 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:31,668 - Recv:  T:21.25 /0.00 B:21.48 /0.00 @:0 B@:0
2020-01-25 19:38:32,790 - Recv: echo:busy: processing
2020-01-25 19:38:32,919 - Send: G29
2020-01-25 19:38:33,668 - Recv:  T:20.47 /0.00 B:22.66 /0.00 @:0 B@:0
2020-01-25 19:38:34,164 - Recv: >>> homeaxis(X)
2020-01-25 19:38:34,167 - Recv: Home 1 Fast:
2020-01-25 19:38:34,170 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 19:38:34,790 - Recv: echo:busy: processing
2020-01-25 19:38:34,982 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:34,986 - Recv: Move Away:
2020-01-25 19:38:34,990 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 19:38:35,230 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:35,234 - Recv: Home 2 Slow:
2020-01-25 19:38:35,238 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 19:38:35,550 - Recv: <<< do_homing_move(X)
2020-01-25 19:38:35,554 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 19:38:35,558 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:35,563 - Recv: > home_offset[X] = 0.00
2020-01-25 19:38:35,567 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:38:35,571 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 19:38:35,575 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:35,578 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:35,581 - Recv: <<< homeaxis(X)
2020-01-25 19:38:35,585 - Recv: >>> homeaxis(Y)
2020-01-25 19:38:35,589 - Recv: Home 1 Fast:
2020-01-25 19:38:35,593 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 19:38:35,668 - Recv:  T:21.05 /0.00 B:22.30 /0.00 @:0 B@:0
2020-01-25 19:38:35,686 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:35,689 - Recv: Move Away:
2020-01-25 19:38:35,691 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 19:38:35,923 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:35,927 - Recv: Home 2 Slow:
2020-01-25 19:38:35,930 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 19:38:36,244 - Recv: <<< do_homing_move(Y)
2020-01-25 19:38:36,247 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 19:38:36,252 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:36,256 - Recv: > home_offset[Y] = 0.00
2020-01-25 19:38:36,261 - Recv:   current_position= X0.00 Y0.00 Z5.00 :
2020-01-25 19:38:36,264 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 19:38:36,268 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:36,272 - Recv:   current_position= X0.00 Y0.00 Z5.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:36,276 - Recv: <<< homeaxis(Y)
2020-01-25 19:38:36,279 - Recv: home_z_safely >>>
2020-01-25 19:38:36,283 - Recv:   current_position= X0.00 Y0.00 Z5.00 : sync_plan_position
2020-01-25 19:38:36,288 - Recv:   destination= X194.00 Y160.00 Z5.00 : home_z_safely
2020-01-25 19:38:36,292 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:36,295 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:36,790 - Recv: echo:busy: processing
2020-01-25 19:38:37,669 - Recv:  T:21.41 /0.00 B:22.70 /0.00 @:0 B@:0
2020-01-25 19:38:38,008 - Recv: >>> homeaxis(Z)
2020-01-25 19:38:38,013 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 19:38:38,017 - Recv: deploy: 1
2020-01-25 19:38:38,022 - Recv: do_probe_raise(5.00)
2020-01-25 19:38:38,026 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:38,030 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:38,034 - Recv: Home 1 Fast:
2020-01-25 19:38:38,038 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 19:38:38,790 - Recv: echo:busy: processing
2020-01-25 19:38:38,829 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:38,833 - Recv: Move Away:
2020-01-25 19:38:38,837 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 19:38:39,373 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:39,377 - Recv: Home 2 Slow:
2020-01-25 19:38:39,380 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 19:38:39,667 - Recv:  T:20.86 /0.00 B:22.46 /0.00 @:0 B@:0
2020-01-25 19:38:40,260 - Recv: <<< do_homing_move(Z)
2020-01-25 19:38:40,265 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 19:38:40,273 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 19:38:40,277 - Recv: > probe_offset.z = 0.00
2020-01-25 19:38:40,281 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 19:38:40,286 - Recv: > home_offset[Z] = 0.00
2020-01-25 19:38:40,290 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 19:38:40,295 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 19:38:40,298 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 19:38:40,301 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 19:38:40,305 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 19:38:40,309 - Recv: deploy: 0
2020-01-25 19:38:40,313 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 19:38:40,324 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:40,328 - Recv: <<< homeaxis(Z)
2020-01-25 19:38:40,333 - Recv: <<< home_z_safely
2020-01-25 19:38:40,337 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:40,339 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:40,791 - Recv: echo:busy: processing
2020-01-25 19:38:41,083 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:38:41,088 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 19:38:41,091 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 19:38:41,095 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 19:38:41,099 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 19:38:41,106 - Recv: <<< G28
2020-01-25 19:38:41,114 - Recv: ok
2020-01-25 19:38:41,120 - Recv: echo:G29
2020-01-25 19:38:41,125 - Recv:   current_position= X194.00 Y160.00 Z5.14 : >>> G29
2020-01-25 19:38:41,129 - Recv: Machine Type: Cartesian
2020-01-25 19:38:41,134 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:38:41,139 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:38:41,143 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:38:41,146 - Recv:  (enabled)
2020-01-25 19:38:41,148 - Recv: ABL Adjustment Z-0.139
2020-01-25 19:38:41,150 - Recv:   current_position= X194.00 Y160.00 Z5.14 : Leveling ON
2020-01-25 19:38:41,152 - Recv:   current_position= X194.00 Y160.00 Z5.00 : ...Now OFF
2020-01-25 19:38:41,154 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:38:41,157 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 19:38:41,159 - Recv: deploy: 1
2020-01-25 19:38:41,161 - Recv: do_probe_raise(5.00)
2020-01-25 19:38:41,164 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:38:41,166 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:41,168 - Recv: >>> probe_at_point(15.00, 15.00, raise, 0, probe_relative)
2020-01-25 19:38:41,170 - Recv:   current_position= X194.00 Y160.00 Z5.00 :
2020-01-25 19:38:41,172 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z5.00
2020-01-25 19:38:41,174 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:41,699 - Recv:  T:21.41 /0.00 B:21.64 /0.00 @:0 B@:0
2020-01-25 19:38:42,530 - Recv:   current_position= X59.00 Y25.00 Z5.00 : set_probe_deployed
2020-01-25 19:38:42,541 - Recv: deploy: 1
2020-01-25 19:38:42,546 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> run_z_probe
2020-01-25 19:38:42,549 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> do_probe_move
2020-01-25 19:38:42,563 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 19:38:42,567 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:43,106 - Recv: echo:busy: processing
2020-01-25 19:38:43,349 - Recv:   current_position= X59.00 Y25.00 Z0.07 : sync_plan_position
2020-01-25 19:38:43,357 - Recv:   current_position= X59.00 Y25.00 Z0.07 : <<< do_probe_move
2020-01-25 19:38:43,363 - Recv: 1st Probe Z:0.07
2020-01-25 19:38:43,368 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.07
2020-01-25 19:38:43,373 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:43,700 - Recv:  T:20.98 /0.00 B:22.50 /0.00 @:0 B@:0
2020-01-25 19:38:43,880 - Recv:   current_position= X59.00 Y25.00 Z3.07 : >>> do_probe_move
2020-01-25 19:38:43,906 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 19:38:43,911 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:44,764 - Recv:   current_position= X59.00 Y25.00 Z0.16 : sync_plan_position
2020-01-25 19:38:44,769 - Recv:   current_position= X59.00 Y25.00 Z0.16 : <<< do_probe_move
2020-01-25 19:38:44,780 - Recv: 2nd Probe Z:0.16 Discrepancy:-0.09
2020-01-25 19:38:44,784 - Recv:   current_position= X59.00 Y25.00 Z0.16 : <<< run_z_probe
2020-01-25 19:38:44,789 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.16
2020-01-25 19:38:44,794 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:45,105 - Recv: echo:busy: processing
2020-01-25 19:38:45,315 - Recv: <<< probe_at_point
2020-01-25 19:38:45,320 - Recv: >>> probe_at_point(135.50, 15.00, raise, 0, probe_relative)
2020-01-25 19:38:45,326 - Recv:   current_position= X59.00 Y25.00 Z3.16 :
2020-01-25 19:38:45,331 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z3.16
2020-01-25 19:38:45,335 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:45,700 - Recv:  T:20.35 /0.00 B:22.62 /0.00 @:0 B@:0
2020-01-25 19:38:46,285 - Recv:   current_position= X179.50 Y25.00 Z3.16 : set_probe_deployed
2020-01-25 19:38:46,290 - Recv: deploy: 1
2020-01-25 19:38:46,300 - Recv:   current_position= X179.50 Y25.00 Z3.16 : >>> run_z_probe
2020-01-25 19:38:46,305 - Recv:   current_position= X179.50 Y25.00 Z3.16 : >>> do_probe_move
2020-01-25 19:38:46,320 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 19:38:46,324 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:46,898 - Recv:   current_position= X179.50 Y25.00 Z-0.29 : sync_plan_position
2020-01-25 19:38:46,902 - Recv:   current_position= X179.50 Y25.00 Z-0.29 : <<< do_probe_move
2020-01-25 19:38:46,907 - Recv: 1st Probe Z:-0.29
2020-01-25 19:38:46,911 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.71
2020-01-25 19:38:46,915 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:47,106 - Recv: echo:busy: processing
2020-01-25 19:38:47,450 - Recv:   current_position= X179.50 Y25.00 Z2.71 : >>> do_probe_move
2020-01-25 19:38:47,476 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 19:38:47,480 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:47,699 - Recv:  T:20.98 /0.00 B:21.91 /0.00 @:0 B@:0
2020-01-25 19:38:48,335 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : sync_plan_position
2020-01-25 19:38:48,343 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : <<< do_probe_move
2020-01-25 19:38:48,350 - Recv: 2nd Probe Z:-0.21 Discrepancy:-0.08
2020-01-25 19:38:48,355 - Recv:   current_position= X179.50 Y25.00 Z-0.21 : <<< run_z_probe
2020-01-25 19:38:48,359 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.79
2020-01-25 19:38:48,363 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:48,887 - Recv: <<< probe_at_point
2020-01-25 19:38:48,892 - Recv: >>> probe_at_point(256.00, 15.00, raise, 0, probe_relative)
2020-01-25 19:38:48,897 - Recv:   current_position= X179.50 Y25.00 Z2.79 :
2020-01-25 19:38:48,901 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.79
2020-01-25 19:38:48,905 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:49,107 - Recv: echo:busy: processing
2020-01-25 19:38:49,699 - Recv:  T:20.20 /0.00 B:22.03 /0.00 @:0 B@:0
2020-01-25 19:38:49,858 - Recv:   current_position= X300.00 Y25.00 Z2.79 : set_probe_deployed
2020-01-25 19:38:49,862 - Recv: deploy: 1
2020-01-25 19:38:49,870 - Recv:   current_position= X300.00 Y25.00 Z2.79 : >>> run_z_probe
2020-01-25 19:38:49,874 - Recv:   current_position= X300.00 Y25.00 Z2.79 : >>> do_probe_move
2020-01-25 19:38:49,893 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 19:38:49,898 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:50,474 - Recv:   current_position= X300.00 Y25.00 Z-0.68 : sync_plan_position
2020-01-25 19:38:50,479 - Recv:   current_position= X300.00 Y25.00 Z-0.68 : <<< do_probe_move
2020-01-25 19:38:50,484 - Recv: 1st Probe Z:-0.68
2020-01-25 19:38:50,488 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.33
2020-01-25 19:38:50,491 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:51,027 - Recv:   current_position= X300.00 Y25.00 Z2.33 : >>> do_probe_move
2020-01-25 19:38:51,053 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 19:38:51,057 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:51,106 - Recv: echo:busy: processing
2020-01-25 19:38:51,699 - Recv:  T:20.82 /0.00 B:21.80 /0.00 @:0 B@:0
2020-01-25 19:38:51,910 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : sync_plan_position
2020-01-25 19:38:51,920 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : <<< do_probe_move
2020-01-25 19:38:51,927 - Recv: 2nd Probe Z:-0.59 Discrepancy:-0.08
2020-01-25 19:38:51,931 - Recv:   current_position= X300.00 Y25.00 Z-0.59 : <<< run_z_probe
2020-01-25 19:38:51,935 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.41
2020-01-25 19:38:51,939 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:52,463 - Recv: <<< probe_at_point
2020-01-25 19:38:52,468 - Recv: >>> probe_at_point(256.00, 150.00, raise, 0, probe_relative)
2020-01-25 19:38:52,472 - Recv:   current_position= X300.00 Y25.00 Z2.41 :
2020-01-25 19:38:52,477 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.41
2020-01-25 19:38:52,480 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:53,106 - Recv: echo:busy: processing
2020-01-25 19:38:53,521 - Recv:   current_position= X300.00 Y160.00 Z2.41 : set_probe_deployed
2020-01-25 19:38:53,526 - Recv: deploy: 1
2020-01-25 19:38:53,530 - Recv:   current_position= X300.00 Y160.00 Z2.41 : >>> run_z_probe
2020-01-25 19:38:53,534 - Recv:   current_position= X300.00 Y160.00 Z2.41 : >>> do_probe_move
2020-01-25 19:38:53,556 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 19:38:53,560 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:53,697 - Recv:  T:20.70 /0.00 B:21.48 /0.00 @:0 B@:0
2020-01-25 19:38:54,050 - Recv:   current_position= X300.00 Y160.00 Z-0.37 : sync_plan_position
2020-01-25 19:38:54,055 - Recv:   current_position= X300.00 Y160.00 Z-0.37 : <<< do_probe_move
2020-01-25 19:38:54,059 - Recv: 1st Probe Z:-0.37
2020-01-25 19:38:54,064 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.63
2020-01-25 19:38:54,068 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:54,602 - Recv:   current_position= X300.00 Y160.00 Z2.63 : >>> do_probe_move
2020-01-25 19:38:54,630 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 19:38:54,634 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:55,106 - Recv: echo:busy: processing
2020-01-25 19:38:55,489 - Recv:   current_position= X300.00 Y160.00 Z-0.29 : sync_plan_position
2020-01-25 19:38:55,494 - Recv:   current_position= X300.00 Y160.00 Z-0.29 : <<< do_probe_move
2020-01-25 19:38:55,499 - Recv: 2nd Probe Z:-0.29 Discrepancy:-0.08
2020-01-25 19:38:55,504 - Recv:   current_position= X300.00 Y160.00 Z-0.29 : <<< run_z_probe
2020-01-25 19:38:55,508 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.71
2020-01-25 19:38:55,511 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:55,698 - Recv:  T:21.13 /0.00 B:22.19 /0.00 @:0 B@:0
2020-01-25 19:38:56,041 - Recv: <<< probe_at_point
2020-01-25 19:38:56,046 - Recv: >>> probe_at_point(135.50, 150.00, raise, 0, probe_relative)
2020-01-25 19:38:56,050 - Recv:   current_position= X300.00 Y160.00 Z2.71 :
2020-01-25 19:38:56,055 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.71
2020-01-25 19:38:56,058 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:57,012 - Recv:   current_position= X179.50 Y160.00 Z2.71 : set_probe_deployed
2020-01-25 19:38:57,023 - Recv: deploy: 1
2020-01-25 19:38:57,028 - Recv:   current_position= X179.50 Y160.00 Z2.71 : >>> run_z_probe
2020-01-25 19:38:57,032 - Recv:   current_position= X179.50 Y160.00 Z2.71 : >>> do_probe_move
2020-01-25 19:38:57,046 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 19:38:57,051 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:57,105 - Recv: echo:busy: processing
2020-01-25 19:38:57,538 - Recv:   current_position= X179.50 Y160.00 Z-0.03 : sync_plan_position
2020-01-25 19:38:57,543 - Recv:   current_position= X179.50 Y160.00 Z-0.03 : <<< do_probe_move
2020-01-25 19:38:57,547 - Recv: 1st Probe Z:-0.03
2020-01-25 19:38:57,551 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.97
2020-01-25 19:38:57,556 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:57,698 - Recv:  T:20.94 /0.00 B:21.33 /0.00 @:0 B@:0
2020-01-25 19:38:58,090 - Recv:   current_position= X179.50 Y160.00 Z2.97 : >>> do_probe_move
2020-01-25 19:38:58,116 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 19:38:58,120 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:58,975 - Recv:   current_position= X179.50 Y160.00 Z0.05 : sync_plan_position
2020-01-25 19:38:58,980 - Recv:   current_position= X179.50 Y160.00 Z0.05 : <<< do_probe_move
2020-01-25 19:38:58,985 - Recv: 2nd Probe Z:0.05 Discrepancy:-0.08
2020-01-25 19:38:58,990 - Recv:   current_position= X179.50 Y160.00 Z0.05 : <<< run_z_probe
2020-01-25 19:38:58,994 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z3.05
2020-01-25 19:38:58,998 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:59,105 - Recv: echo:busy: processing
2020-01-25 19:38:59,526 - Recv: <<< probe_at_point
2020-01-25 19:38:59,531 - Recv: >>> probe_at_point(15.00, 150.00, raise, 0, probe_relative)
2020-01-25 19:38:59,536 - Recv:   current_position= X179.50 Y160.00 Z3.05 :
2020-01-25 19:38:59,540 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.05
2020-01-25 19:38:59,544 - Recv: <<< do_blocking_move_to
2020-01-25 19:38:59,711 - Recv:  T:20.74 /0.00 B:22.46 /0.00 @:0 B@:0
2020-01-25 19:39:00,498 - Recv:   current_position= X59.00 Y160.00 Z3.05 : set_probe_deployed
2020-01-25 19:39:00,503 - Recv: deploy: 1
2020-01-25 19:39:00,507 - Recv:   current_position= X59.00 Y160.00 Z3.05 : >>> run_z_probe
2020-01-25 19:39:00,511 - Recv:   current_position= X59.00 Y160.00 Z3.05 : >>> do_probe_move
2020-01-25 19:39:00,532 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 19:39:00,536 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:01,029 - Recv:   current_position= X59.00 Y160.00 Z0.26 : sync_plan_position
2020-01-25 19:39:01,033 - Recv:   current_position= X59.00 Y160.00 Z0.26 : <<< do_probe_move
2020-01-25 19:39:01,038 - Recv: 1st Probe Z:0.26
2020-01-25 19:39:01,043 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.26
2020-01-25 19:39:01,046 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:01,105 - Recv: echo:busy: processing
2020-01-25 19:39:01,580 - Recv:   current_position= X59.00 Y160.00 Z3.26 : >>> do_probe_move
2020-01-25 19:39:01,607 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 19:39:01,612 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:01,710 - Recv:  T:21.05 /0.00 B:22.54 /0.00 @:0 B@:0
2020-01-25 19:39:02,465 - Recv:   current_position= X59.00 Y160.00 Z0.35 : sync_plan_position
2020-01-25 19:39:02,470 - Recv:   current_position= X59.00 Y160.00 Z0.35 : <<< do_probe_move
2020-01-25 19:39:02,474 - Recv: 2nd Probe Z:0.35 Discrepancy:-0.08
2020-01-25 19:39:02,478 - Recv:   current_position= X59.00 Y160.00 Z0.35 : <<< run_z_probe
2020-01-25 19:39:02,483 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.35
2020-01-25 19:39:02,486 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:03,016 - Recv: <<< probe_at_point
2020-01-25 19:39:03,020 - Recv: >>> probe_at_point(15.00, 285.00, raise, 0, probe_relative)
2020-01-25 19:39:03,026 - Recv:   current_position= X59.00 Y160.00 Z3.35 :
2020-01-25 19:39:03,029 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.35
2020-01-25 19:39:03,033 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:03,105 - Recv: echo:busy: processing
2020-01-25 19:39:03,712 - Recv:  T:20.59 /0.00 B:21.33 /0.00 @:0 B@:0
2020-01-25 19:39:04,074 - Recv:   current_position= X59.00 Y295.00 Z3.35 : set_probe_deployed
2020-01-25 19:39:04,079 - Recv: deploy: 1
2020-01-25 19:39:04,083 - Recv:   current_position= X59.00 Y295.00 Z3.35 : >>> run_z_probe
2020-01-25 19:39:04,087 - Recv:   current_position= X59.00 Y295.00 Z3.35 : >>> do_probe_move
2020-01-25 19:39:04,111 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 19:39:04,116 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:04,605 - Recv:   current_position= X59.00 Y295.00 Z0.56 : sync_plan_position
2020-01-25 19:39:04,610 - Recv:   current_position= X59.00 Y295.00 Z0.56 : <<< do_probe_move
2020-01-25 19:39:04,618 - Recv: 1st Probe Z:0.56
2020-01-25 19:39:04,625 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.56
2020-01-25 19:39:04,630 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:05,105 - Recv: echo:busy: processing
2020-01-25 19:39:05,156 - Recv:   current_position= X59.00 Y295.00 Z3.56 : >>> do_probe_move
2020-01-25 19:39:05,184 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 19:39:05,188 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:05,711 - Recv:  T:21.13 /0.00 B:22.62 /0.00 @:0 B@:0
2020-01-25 19:39:06,041 - Recv:   current_position= X59.00 Y295.00 Z0.64 : sync_plan_position
2020-01-25 19:39:06,045 - Recv:   current_position= X59.00 Y295.00 Z0.64 : <<< do_probe_move
2020-01-25 19:39:06,050 - Recv: 2nd Probe Z:0.64 Discrepancy:-0.08
2020-01-25 19:39:06,055 - Recv:   current_position= X59.00 Y295.00 Z0.64 : <<< run_z_probe
2020-01-25 19:39:06,058 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.64
2020-01-25 19:39:06,062 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:06,592 - Recv: <<< probe_at_point
2020-01-25 19:39:06,597 - Recv: >>> probe_at_point(135.50, 285.00, raise, 0, probe_relative)
2020-01-25 19:39:06,602 - Recv:   current_position= X59.00 Y295.00 Z3.64 :
2020-01-25 19:39:06,606 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.64
2020-01-25 19:39:06,610 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:07,106 - Recv: echo:busy: processing
2020-01-25 19:39:07,563 - Recv:   current_position= X179.50 Y295.00 Z3.64 : set_probe_deployed
2020-01-25 19:39:07,568 - Recv: deploy: 1
2020-01-25 19:39:07,572 - Recv:   current_position= X179.50 Y295.00 Z3.64 : >>> run_z_probe
2020-01-25 19:39:07,576 - Recv:   current_position= X179.50 Y295.00 Z3.64 : >>> do_probe_move
2020-01-25 19:39:07,598 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 19:39:07,602 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:07,711 - Recv:  T:21.33 /0.00 B:21.37 /0.00 @:0 B@:0
2020-01-25 19:39:08,176 - Recv:   current_position= X179.50 Y295.00 Z0.21 : sync_plan_position
2020-01-25 19:39:08,181 - Recv:   current_position= X179.50 Y295.00 Z0.21 : <<< do_probe_move
2020-01-25 19:39:08,185 - Recv: 1st Probe Z:0.21
2020-01-25 19:39:08,189 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.21
2020-01-25 19:39:08,194 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:08,727 - Recv:   current_position= X179.50 Y295.00 Z3.21 : >>> do_probe_move
2020-01-25 19:39:08,755 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 19:39:08,759 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:09,105 - Recv: echo:busy: processing
2020-01-25 19:39:09,613 - Recv:   current_position= X179.50 Y295.00 Z0.29 : sync_plan_position
2020-01-25 19:39:09,618 - Recv:   current_position= X179.50 Y295.00 Z0.29 : <<< do_probe_move
2020-01-25 19:39:09,622 - Recv: 2nd Probe Z:0.29 Discrepancy:-0.08
2020-01-25 19:39:09,627 - Recv:   current_position= X179.50 Y295.00 Z0.29 : <<< run_z_probe
2020-01-25 19:39:09,631 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.29
2020-01-25 19:39:09,635 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:09,710 - Recv:  T:20.74 /0.00 B:21.68 /0.00 @:0 B@:0
2020-01-25 19:39:10,166 - Recv: <<< probe_at_point
2020-01-25 19:39:10,170 - Recv: >>> probe_at_point(256.00, 285.00, raise, 0, probe_relative)
2020-01-25 19:39:10,175 - Recv:   current_position= X179.50 Y295.00 Z3.29 :
2020-01-25 19:39:10,186 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z3.29
2020-01-25 19:39:10,190 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:11,105 - Recv: echo:busy: processing
2020-01-25 19:39:11,135 - Recv:   current_position= X300.00 Y295.00 Z3.29 : set_probe_deployed
2020-01-25 19:39:11,140 - Recv: deploy: 1
2020-01-25 19:39:11,144 - Recv:   current_position= X300.00 Y295.00 Z3.29 : >>> run_z_probe
2020-01-25 19:39:11,148 - Recv:   current_position= X300.00 Y295.00 Z3.29 : >>> do_probe_move
2020-01-25 19:39:11,171 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 19:39:11,176 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:11,710 - Recv:  T:21.29 /0.00 B:22.03 /0.00 @:0 B@:0
2020-01-25 19:39:11,751 - Recv:   current_position= X300.00 Y295.00 Z-0.16 : sync_plan_position
2020-01-25 19:39:11,755 - Recv:   current_position= X300.00 Y295.00 Z-0.16 : <<< do_probe_move
2020-01-25 19:39:11,760 - Recv: 1st Probe Z:-0.16
2020-01-25 19:39:11,764 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.84
2020-01-25 19:39:11,767 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:12,303 - Recv:   current_position= X300.00 Y295.00 Z2.84 : >>> do_probe_move
2020-01-25 19:39:12,330 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 19:39:12,335 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:13,105 - Recv: echo:busy: processing
2020-01-25 19:39:13,188 - Recv:   current_position= X300.00 Y295.00 Z-0.08 : sync_plan_position
2020-01-25 19:39:13,193 - Recv:   current_position= X300.00 Y295.00 Z-0.08 : <<< do_probe_move
2020-01-25 19:39:13,197 - Recv: 2nd Probe Z:-0.08 Discrepancy:-0.08
2020-01-25 19:39:13,202 - Recv:   current_position= X300.00 Y295.00 Z-0.08 : <<< run_z_probe
2020-01-25 19:39:13,206 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.92
2020-01-25 19:39:13,210 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:13,711 - Recv:  T:20.70 /0.00 B:21.84 /0.00 @:0 B@:0
2020-01-25 19:39:13,741 - Recv: <<< probe_at_point
2020-01-25 19:39:13,751 - Recv:   current_position= X300.00 Y295.00 Z2.92 : set_probe_deployed
2020-01-25 19:39:13,759 - Recv: deploy: 0
2020-01-25 19:39:13,763 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.92
2020-01-25 19:39:13,768 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:13,772 - Recv:   current_position= X300.00 Y295.00 Z2.92 : > probing complete
2020-01-25 19:39:13,777 - Recv: Extrapolate [ 1+  1+]
2020-01-25 19:39:13,782 - Recv:  (done)
2020-01-25 19:39:13,788 - Recv: Extrapolate [ 1-  1+]
2020-01-25 19:39:13,792 - Recv:  (done)
2020-01-25 19:39:13,795 - Recv: Extrapolate [ 1+  1-]
2020-01-25 19:39:13,799 - Recv:  (done)
2020-01-25 19:39:13,804 - Recv: Extrapolate [ 1-  1-]
2020-01-25 19:39:13,808 - Recv:  (done)
2020-01-25 19:39:13,812 - Recv: Extrapolate [ 1+  0+]
2020-01-25 19:39:13,816 - Recv:  (done)
2020-01-25 19:39:13,819 - Recv: Extrapolate [ 1-  0+]
2020-01-25 19:39:13,822 - Recv:  (done)
2020-01-25 19:39:13,825 - Recv: Extrapolate [ 1+  2-]
2020-01-25 19:39:13,830 - Recv:  (done)
2020-01-25 19:39:13,834 - Recv: Extrapolate [ 1-  2-]
2020-01-25 19:39:13,838 - Recv:  (done)
2020-01-25 19:39:13,842 - Recv: Extrapolate [ 0+  1+]
2020-01-25 19:39:13,846 - Recv:  (done)
2020-01-25 19:39:13,850 - Recv: Extrapolate [ 2-  1+]
2020-01-25 19:39:13,855 - Recv:  (done)
2020-01-25 19:39:13,859 - Recv: Extrapolate [ 0+  1-]
2020-01-25 19:39:13,865 - Recv:  (done)
2020-01-25 19:39:13,869 - Recv: Extrapolate [ 2-  1-]
2020-01-25 19:39:13,873 - Recv:  (done)
2020-01-25 19:39:13,877 - Recv: Extrapolate [ 0+  0+]
2020-01-25 19:39:13,879 - Recv:  (done)
2020-01-25 19:39:13,882 - Recv: Extrapolate [ 2-  0+]
2020-01-25 19:39:13,884 - Recv:  (done)
2020-01-25 19:39:13,886 - Recv: Extrapolate [ 0+  2-]
2020-01-25 19:39:13,888 - Recv:  (done)
2020-01-25 19:39:13,890 - Recv: Extrapolate [ 2-  2-]
2020-01-25 19:39:13,893 - Recv:  (done)
2020-01-25 19:39:13,895 - Recv: Bilinear Leveling Grid:
2020-01-25 19:39:13,897 - Recv:       0      1      2
2020-01-25 19:39:13,899 - Recv:  0 +0.121 -0.241 -0.626
2020-01-25 19:39:13,901 - Recv:  1 +0.312 +0.018 -0.319
2020-01-25 19:39:13,903 - Recv:  2 +0.610 +0.256 -0.113
2020-01-25 19:39:13,906 - Recv:
2020-01-25 19:39:13,908 - Recv: G29 uncorrected Z:2.92
2020-01-25 19:39:13,910 - Recv:  corrected Z:3.03
2020-01-25 19:39:13,912 - Recv: <<< G29
2020-01-25 19:39:13,915 - Recv:   current_position= X300.00 Y295.00 Z3.03 : sync_plan_position
2020-01-25 19:39:13,917 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 19:39:13,919 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:14,196 - Recv: X:300.00 Y:295.00 Z:5.00 E:0.00 Count X:30000 Y:29500 Z:1955
2020-01-25 19:39:14,199 - Recv: ok
2020-01-25 19:39:15,711 - Recv:  T:20.86 /0.00 B:21.68 /0.00 @:0 B@:0
2020-01-25 19:39:17,710 - Recv:  T:21.25 /0.00 B:21.84 /0.00 @:0 B@:0
2020-01-25 19:39:19,710 - Recv:  T:20.08 /0.00 B:22.54 /0.00 @:0 B@:0
2020-01-25 19:39:21,710 - Recv:  T:22.27 /0.00 B:21.99 /0.00 @:0 B@:0
2020-01-25 19:39:23,711 - Recv:  T:20.35 /0.00 B:22.07 /0.00 @:0 B@:0
2020-01-25 19:39:25,711 - Recv:  T:20.16 /0.00 B:22.42 /0.00 @:0 B@:0
2020-01-25 19:39:27,710 - Recv:  T:20.70 /0.00 B:22.30 /0.00 @:0 B@:0
2020-01-25 19:39:29,710 - Recv:  T:20.94 /0.00 B:21.84 /0.00 @:0 B@:0
2020-01-25 19:39:31,709 - Recv:  T:20.55 /0.00 B:21.45 /0.00 @:0 B@:0
2020-01-25 19:39:33,710 - Recv:  T:20.78 /0.00 B:22.19 /0.00 @:0 B@:0
2020-01-25 19:39:35,710 - Recv:  T:20.43 /0.00 B:22.38 /0.00 @:0 B@:0
2020-01-25 19:39:35,790 - Send: M500
2020-01-25 19:39:35,796 - Recv: echo:M500
2020-01-25 19:39:35,983 - Recv: echo:Settings Stored (635 bytes; crc 58144)
2020-01-25 19:39:35,987 - Recv: ok
2020-01-25 19:39:37,711 - Recv:  T:21.76 /0.00 B:21.60 /0.00 @:0 B@:0
2020-01-25 19:39:38,979 - Send: G28
2020-01-25 19:39:39,004 - Recv: echo:G28
2020-01-25 19:39:39,018 - Recv: >>> G28
2020-01-25 19:39:39,023 - Recv: Machine Type: Cartesian
2020-01-25 19:39:39,027 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 19:39:39,031 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 19:39:39,036 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 19:39:39,040 - Recv:  (enabled)
2020-01-25 19:39:39,044 - Recv: ABL Adjustment Z-0.114
2020-01-25 19:39:39,048 - Recv:   current_position= X300.00 Y295.00 Z5.00 : Leveling ON
2020-01-25 19:39:39,051 - Recv:   current_position= X300.00 Y295.00 Z4.89 : ...Now OFF
2020-01-25 19:39:39,054 - Recv:   current_position= X300.00 Y295.00 Z4.89 : sync_plan_position
2020-01-25 19:39:39,057 - Recv:   current_position= X0.00 Y0.00 Z4.89 : sync_plan_position
2020-01-25 19:39:39,060 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z4.89
2020-01-25 19:39:39,064 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:39,710 - Recv:  T:20.35 /0.00 B:21.84 /0.00 @:0 B@:0
2020-01-25 19:39:40,983 - Recv: echo:busy: processing
2020-01-25 19:39:41,710 - Recv:  T:20.94 /0.00 B:21.52 /0.00 @:0 B@:0
2020-01-25 19:39:42,984 - Recv: echo:busy: processing
2020-01-25 19:39:43,710 - Recv:  T:20.70 /0.00 B:22.66 /0.00 @:0 B@:0
2020-01-25 19:39:44,983 - Recv: echo:busy: processing
2020-01-25 19:39:45,064 - Recv: >>> homeaxis(X)
2020-01-25 19:39:45,069 - Recv: Home 1 Fast:
2020-01-25 19:39:45,074 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 19:39:45,301 - Recv: <<< do_homing_move(X)
2020-01-25 19:39:45,305 - Recv: Move Away:
2020-01-25 19:39:45,309 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 19:39:45,548 - Recv: <<< do_homing_move(X)
2020-01-25 19:39:45,552 - Recv: Home 2 Slow:
2020-01-25 19:39:45,557 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 19:39:45,709 - Recv:  T:21.02 /0.00 B:21.21 /0.00 @:0 B@:0
2020-01-25 19:39:45,868 - Recv: <<< do_homing_move(X)
2020-01-25 19:39:45,873 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 19:39:45,878 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 19:39:45,888 - Recv: > home_offset[X] = 0.00
2020-01-25 19:39:45,896 - Recv:   current_position= X0.00 Y0.00 Z4.89 :
2020-01-25 19:39:45,900 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 19:39:45,905 - Recv:   current_position= X0.00 Y0.00 Z4.89 : sync_plan_position
2020-01-25 19:39:45,910 - Recv:   current_position= X0.00 Y0.00 Z4.89 : > AFTER set_axis_is_at_home
2020-01-25 19:39:45,918 - Recv: <<< homeaxis(X)
2020-01-25 19:39:45,923 - Recv: >>> homeaxis(Y)
2020-01-25 19:39:45,928 - Recv: Home 1 Fast:
2020-01-25 19:39:45,933 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 19:39:45,993 - Recv: <<< do_homing_move(Y)
2020-01-25 19:39:45,998 - Recv: Move Away:
2020-01-25 19:39:46,002 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 19:39:46,241 - Recv: <<< do_homing_move(Y)
2020-01-25 19:39:46,245 - Recv: Home 2 Slow:
2020-01-25 19:39:46,250 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 19:39:46,562 - Recv: <<< do_homing_move(Y)
2020-01-25 19:39:46,566 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 19:39:46,570 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 19:39:46,574 - Recv: > home_offset[Y] = 0.00
2020-01-25 19:39:46,579 - Recv:   current_position= X0.00 Y0.00 Z4.89 :
2020-01-25 19:39:46,583 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 19:39:46,586 - Recv:   current_position= X0.00 Y0.00 Z4.89 : sync_plan_position
2020-01-25 19:39:46,591 - Recv:   current_position= X0.00 Y0.00 Z4.89 : > AFTER set_axis_is_at_home
2020-01-25 19:39:46,595 - Recv: <<< homeaxis(Y)
2020-01-25 19:39:46,599 - Recv: home_z_safely >>>
2020-01-25 19:39:46,603 - Recv:   current_position= X0.00 Y0.00 Z4.89 : sync_plan_position
2020-01-25 19:39:46,606 - Recv:   destination= X194.00 Y160.00 Z4.89 : home_z_safely
2020-01-25 19:39:46,609 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.89
2020-01-25 19:39:46,611 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:46,983 - Recv: echo:busy: processing
2020-01-25 19:39:47,710 - Recv:  T:20.94 /0.00 B:22.81 /0.00 @:0 B@:0
2020-01-25 19:39:48,326 - Recv: >>> homeaxis(Z)
2020-01-25 19:39:48,337 - Recv:   current_position= X194.00 Y160.00 Z4.89 : set_probe_deployed
2020-01-25 19:39:48,343 - Recv: deploy: 1
2020-01-25 19:39:48,346 - Recv: do_probe_raise(5.00)
2020-01-25 19:39:48,350 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:39:48,354 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:48,494 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:39:48,498 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:48,503 - Recv: Home 1 Fast:
2020-01-25 19:39:48,507 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 19:39:48,983 - Recv: echo:busy: processing
2020-01-25 19:39:49,308 - Recv: <<< do_homing_move(Z)
2020-01-25 19:39:49,313 - Recv: Move Away:
2020-01-25 19:39:49,317 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 19:39:49,709 - Recv:  T:20.90 /0.00 B:23.28 /0.00 @:0 B@:0
2020-01-25 19:39:49,854 - Recv: <<< do_homing_move(Z)
2020-01-25 19:39:49,859 - Recv: Home 2 Slow:
2020-01-25 19:39:49,862 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 19:39:50,738 - Recv: <<< do_homing_move(Z)
2020-01-25 19:39:50,743 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 19:39:50,748 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 19:39:50,753 - Recv: > probe_offset.z = 0.00
2020-01-25 19:39:50,757 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 19:39:50,762 - Recv: > home_offset[Z] = 0.00
2020-01-25 19:39:50,767 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 19:39:50,771 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 19:39:50,774 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 19:39:50,779 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 19:39:50,783 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 19:39:50,787 - Recv: deploy: 0
2020-01-25 19:39:50,791 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 19:39:50,795 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:50,799 - Recv: <<< homeaxis(Z)
2020-01-25 19:39:50,802 - Recv: <<< home_z_safely
2020-01-25 19:39:50,805 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 19:39:50,810 - Recv: <<< do_blocking_move_to
2020-01-25 19:39:50,982 - Recv: echo:busy: processing
2020-01-25 19:39:51,561 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 19:39:51,566 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 19:39:51,570 - Recv:   current_position= X194.00 Y160.00 Z5.13 : ...Now ON
2020-01-25 19:39:51,575 - Recv:   current_position= X194.00 Y160.00 Z5.13 : sync_plan_position
2020-01-25 19:39:51,579 - Recv: X:194.00 Y:160.00 Z:5.13 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 19:39:51,585 - Recv: <<< G28
2020-01-25 19:39:51,593 - Recv: ok
TRUNCATED LINES FROM WHEN I WAS AFK
2020-01-25 20:23:46,002 - Recv:  T:18.83 /0.00 B:19.73 /0.00 @:0 B@:0
2020-01-25 20:23:46,400 - Send: G28
2020-01-25 20:23:46,407 - Recv: echo:G28
2020-01-25 20:23:46,415 - Recv: >>> G28
2020-01-25 20:23:46,419 - Recv: Machine Type: Cartesian
2020-01-25 20:23:46,425 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:23:46,430 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 20:23:46,434 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:23:46,438 - Recv:  (enabled)
2020-01-25 20:23:46,440 - Recv: ABL Adjustment Z-0.129
2020-01-25 20:23:46,442 - Recv:   current_position= X194.00 Y160.00 Z5.13 : Leveling ON
2020-01-25 20:23:46,444 - Recv:   current_position= X194.00 Y160.00 Z5.00 : ...Now OFF
2020-01-25 20:23:46,447 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:23:46,449 - Recv: Raise Z (before homing) to 8.00
2020-01-25 20:23:46,451 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z8.00
2020-01-25 20:23:46,454 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:46,969 - Recv:   current_position= X0.00 Y0.00 Z8.00 : sync_plan_position
2020-01-25 20:23:46,973 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z8.00
2020-01-25 20:23:46,975 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:47,802 - Send: G29
2020-01-25 20:23:48,004 - Recv:  T:18.63 /0.00 B:19.57 /0.00 @:0 B@:0
2020-01-25 20:23:48,405 - Recv: echo:busy: processing
2020-01-25 20:23:50,003 - Recv:  T:19.30 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:23:50,326 - Recv: >>> homeaxis(X)
2020-01-25 20:23:50,330 - Recv: Home 1 Fast:
2020-01-25 20:23:50,334 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:23:50,405 - Recv: echo:busy: processing
2020-01-25 20:23:51,144 - Recv: <<< do_homing_move(X)
2020-01-25 20:23:51,154 - Recv: Move Away:
2020-01-25 20:23:51,159 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:23:51,390 - Recv: <<< do_homing_move(X)
2020-01-25 20:23:51,395 - Recv: Home 2 Slow:
2020-01-25 20:23:51,399 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:23:51,711 - Recv: <<< do_homing_move(X)
2020-01-25 20:23:51,716 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:23:51,720 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:23:51,725 - Recv: > home_offset[X] = 0.00
2020-01-25 20:23:51,730 - Recv:   current_position= X0.00 Y0.00 Z8.00 :
2020-01-25 20:23:51,733 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:23:51,736 - Recv:   current_position= X0.00 Y0.00 Z8.00 : sync_plan_position
2020-01-25 20:23:51,740 - Recv:   current_position= X0.00 Y0.00 Z8.00 : > AFTER set_axis_is_at_home
2020-01-25 20:23:51,745 - Recv: <<< homeaxis(X)
2020-01-25 20:23:51,748 - Recv: >>> homeaxis(Y)
2020-01-25 20:23:51,752 - Recv: Home 1 Fast:
2020-01-25 20:23:51,757 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:23:51,835 - Recv: <<< do_homing_move(Y)
2020-01-25 20:23:51,839 - Recv: Move Away:
2020-01-25 20:23:51,845 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:23:52,027 - Recv:  T:19.14 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:23:52,047 - Send: G29
2020-01-25 20:23:52,081 - Recv: <<< do_homing_move(Y)
2020-01-25 20:23:52,084 - Recv: Home 2 Slow:
2020-01-25 20:23:52,086 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:23:52,403 - Recv: echo:busy: processing
2020-01-25 20:23:52,405 - Recv: <<< do_homing_move(Y)
2020-01-25 20:23:52,408 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:23:52,410 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:23:52,413 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:23:52,415 - Recv:   current_position= X0.00 Y0.00 Z8.00 :
2020-01-25 20:23:52,417 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:23:52,420 - Recv:   current_position= X0.00 Y0.00 Z8.00 : sync_plan_position
2020-01-25 20:23:52,422 - Recv:   current_position= X0.00 Y0.00 Z8.00 : > AFTER set_axis_is_at_home
2020-01-25 20:23:52,424 - Recv: <<< homeaxis(Y)
2020-01-25 20:23:52,427 - Recv: home_z_safely >>>
2020-01-25 20:23:52,429 - Recv:   current_position= X0.00 Y0.00 Z8.00 : sync_plan_position
2020-01-25 20:23:52,431 - Recv:   destination= X194.00 Y160.00 Z8.00 : home_z_safely
2020-01-25 20:23:52,433 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z8.00
2020-01-25 20:23:52,435 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:54,003 - Recv:  T:19.77 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:23:54,167 - Recv: >>> homeaxis(Z)
2020-01-25 20:23:54,171 - Recv:   current_position= X194.00 Y160.00 Z8.00 : set_probe_deployed
2020-01-25 20:23:54,175 - Recv: deploy: 1
2020-01-25 20:23:54,180 - Recv: do_probe_raise(5.00)
2020-01-25 20:23:54,184 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z8.00
2020-01-25 20:23:54,188 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:54,191 - Recv: Home 1 Fast:
2020-01-25 20:23:54,195 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:23:54,405 - Recv: echo:busy: processing
2020-01-25 20:23:55,368 - Recv: <<< do_homing_move(Z)
2020-01-25 20:23:55,378 - Recv: Move Away:
2020-01-25 20:23:55,384 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:23:55,913 - Recv: <<< do_homing_move(Z)
2020-01-25 20:23:55,917 - Recv: Home 2 Slow:
2020-01-25 20:23:55,921 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:23:56,010 - Recv:  T:18.67 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:23:56,404 - Recv: echo:busy: processing
2020-01-25 20:23:56,799 - Recv: <<< do_homing_move(Z)
2020-01-25 20:23:56,804 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:23:56,809 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:23:56,813 - Recv: > probe_offset.z = 0.00
2020-01-25 20:23:56,818 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:23:56,823 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:23:56,827 - Recv:   current_position= X194.00 Y160.00 Z0.00 :
2020-01-25 20:23:56,832 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:23:56,836 - Recv:   current_position= X194.00 Y160.00 Z0.00 : sync_plan_position
2020-01-25 20:23:56,840 - Recv:   current_position= X194.00 Y160.00 Z0.00 : > AFTER set_axis_is_at_home
2020-01-25 20:23:56,844 - Recv:   current_position= X194.00 Y160.00 Z0.00 : set_probe_deployed
2020-01-25 20:23:56,848 - Recv: deploy: 0
2020-01-25 20:23:56,853 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z0.00
2020-01-25 20:23:56,857 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:56,860 - Recv: <<< homeaxis(Z)
2020-01-25 20:23:56,865 - Recv: <<< home_z_safely
2020-01-25 20:23:56,868 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:23:56,872 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:57,621 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:23:57,631 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:23:57,636 - Recv:   current_position= X194.00 Y160.00 Z5.13 : ...Now ON
2020-01-25 20:23:57,642 - Recv:   current_position= X194.00 Y160.00 Z5.13 : sync_plan_position
2020-01-25 20:23:57,647 - Recv: X:194.00 Y:160.00 Z:5.13 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:23:57,654 - Recv: <<< G28
2020-01-25 20:23:57,662 - Recv: ok
2020-01-25 20:23:57,668 - Recv: echo:G29
2020-01-25 20:23:57,673 - Recv:   current_position= X194.00 Y160.00 Z5.13 : >>> G29
2020-01-25 20:23:57,677 - Recv: Machine Type: Cartesian
2020-01-25 20:23:57,680 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:23:57,684 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 20:23:57,688 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:23:57,693 - Recv:  (enabled)
2020-01-25 20:23:57,697 - Recv: ABL Adjustment Z-0.129
2020-01-25 20:23:57,701 - Recv:   current_position= X194.00 Y160.00 Z5.13 : Leveling ON
2020-01-25 20:23:57,705 - Recv:   current_position= X194.00 Y160.00 Z5.00 : ...Now OFF
2020-01-25 20:23:57,708 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:23:57,710 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 20:23:57,713 - Recv: deploy: 1
2020-01-25 20:23:57,715 - Recv: do_probe_raise(5.00)
2020-01-25 20:23:57,718 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:23:57,720 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:57,722 - Recv: >>> probe_at_point(15.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:23:57,724 - Recv:   current_position= X194.00 Y160.00 Z5.00 :
2020-01-25 20:23:57,726 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z5.00
2020-01-25 20:23:57,729 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:58,010 - Recv:  T:18.75 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:23:59,058 - Recv:   current_position= X59.00 Y25.00 Z5.00 : set_probe_deployed
2020-01-25 20:23:59,070 - Recv: deploy: 1
2020-01-25 20:23:59,074 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> run_z_probe
2020-01-25 20:23:59,079 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> do_probe_move
2020-01-25 20:23:59,091 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 20:23:59,096 - Recv: <<< do_blocking_move_to
2020-01-25 20:23:59,634 - Recv: echo:busy: processing
2020-01-25 20:23:59,857 - Recv:   current_position= X59.00 Y25.00 Z0.07 : sync_plan_position
2020-01-25 20:23:59,861 - Recv:   current_position= X59.00 Y25.00 Z0.07 : <<< do_probe_move
2020-01-25 20:23:59,866 - Recv: 1st Probe Z:0.07
2020-01-25 20:23:59,870 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.07
2020-01-25 20:23:59,874 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:00,025 - Recv:  T:19.18 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:24:00,408 - Recv:   current_position= X59.00 Y25.00 Z3.07 : >>> do_probe_move
2020-01-25 20:24:00,435 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 20:24:00,439 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:01,292 - Recv:   current_position= X59.00 Y25.00 Z0.15 : sync_plan_position
2020-01-25 20:24:01,299 - Recv:   current_position= X59.00 Y25.00 Z0.15 : <<< do_probe_move
2020-01-25 20:24:01,301 - Recv: 2nd Probe Z:0.15 Discrepancy:-0.08
2020-01-25 20:24:01,304 - Recv:   current_position= X59.00 Y25.00 Z0.15 : <<< run_z_probe
2020-01-25 20:24:01,306 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.15
2020-01-25 20:24:01,308 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:01,635 - Recv: echo:busy: processing
2020-01-25 20:24:01,845 - Recv: <<< probe_at_point
2020-01-25 20:24:01,853 - Recv: >>> probe_at_point(135.50, 15.00, raise, 0, probe_relative)
2020-01-25 20:24:01,858 - Recv:   current_position= X59.00 Y25.00 Z3.15 :
2020-01-25 20:24:01,862 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z3.15
2020-01-25 20:24:01,866 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:02,025 - Recv:  T:18.71 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:24:02,817 - Recv:   current_position= X179.50 Y25.00 Z3.15 : set_probe_deployed
2020-01-25 20:24:02,824 - Recv: deploy: 1
2020-01-25 20:24:02,829 - Recv:   current_position= X179.50 Y25.00 Z3.15 : >>> run_z_probe
2020-01-25 20:24:02,832 - Recv:   current_position= X179.50 Y25.00 Z3.15 : >>> do_probe_move
2020-01-25 20:24:02,848 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 20:24:02,852 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:03,423 - Recv:   current_position= X179.50 Y25.00 Z-0.27 : sync_plan_position
2020-01-25 20:24:03,428 - Recv:   current_position= X179.50 Y25.00 Z-0.27 : <<< do_probe_move
2020-01-25 20:24:03,432 - Recv: 1st Probe Z:-0.27
2020-01-25 20:24:03,436 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.73
2020-01-25 20:24:03,439 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:03,634 - Recv: echo:busy: processing
2020-01-25 20:24:03,976 - Recv:   current_position= X179.50 Y25.00 Z2.73 : >>> do_probe_move
2020-01-25 20:24:04,002 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 20:24:04,005 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:04,024 - Recv:  T:19.77 /0.00 B:18.36 /0.00 @:0 B@:0
2020-01-25 20:24:04,863 - Recv:   current_position= X179.50 Y25.00 Z-0.20 : sync_plan_position
2020-01-25 20:24:04,875 - Recv:   current_position= X179.50 Y25.00 Z-0.20 : <<< do_probe_move
2020-01-25 20:24:04,880 - Recv: 2nd Probe Z:-0.20 Discrepancy:-0.07
2020-01-25 20:24:04,883 - Recv:   current_position= X179.50 Y25.00 Z-0.20 : <<< run_z_probe
2020-01-25 20:24:04,886 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.80
2020-01-25 20:24:04,888 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:05,414 - Recv: <<< probe_at_point
2020-01-25 20:24:05,419 - Recv: >>> probe_at_point(256.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:24:05,422 - Recv:   current_position= X179.50 Y25.00 Z2.80 :
2020-01-25 20:24:05,427 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.80
2020-01-25 20:24:05,431 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:05,635 - Recv: echo:busy: processing
2020-01-25 20:24:06,024 - Recv:  T:18.09 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:24:06,393 - Recv:   current_position= X300.00 Y25.00 Z2.80 : set_probe_deployed
2020-01-25 20:24:06,398 - Recv: deploy: 1
2020-01-25 20:24:06,403 - Recv:   current_position= X300.00 Y25.00 Z2.80 : >>> run_z_probe
2020-01-25 20:24:06,406 - Recv:   current_position= X300.00 Y25.00 Z2.80 : >>> do_probe_move
2020-01-25 20:24:06,426 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 20:24:06,431 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:07,005 - Recv:   current_position= X300.00 Y25.00 Z-0.65 : sync_plan_position
2020-01-25 20:24:07,010 - Recv:   current_position= X300.00 Y25.00 Z-0.65 : <<< do_probe_move
2020-01-25 20:24:07,015 - Recv: 1st Probe Z:-0.65
2020-01-25 20:24:07,020 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.35
2020-01-25 20:24:07,023 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:07,558 - Recv:   current_position= X300.00 Y25.00 Z2.35 : >>> do_probe_move
2020-01-25 20:24:07,584 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 20:24:07,588 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:07,634 - Recv: echo:busy: processing
2020-01-25 20:24:07,838 - Send: M851 Z-1.65
2020-01-25 20:24:08,023 - Recv:  T:19.14 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:24:08,444 - Recv:   current_position= X300.00 Y25.00 Z-0.58 : sync_plan_position
2020-01-25 20:24:08,448 - Recv:   current_position= X300.00 Y25.00 Z-0.58 : <<< do_probe_move
2020-01-25 20:24:08,453 - Recv: 2nd Probe Z:-0.58 Discrepancy:-0.08
2020-01-25 20:24:08,458 - Recv:   current_position= X300.00 Y25.00 Z-0.58 : <<< run_z_probe
2020-01-25 20:24:08,462 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.42
2020-01-25 20:24:08,465 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:08,996 - Recv: <<< probe_at_point
2020-01-25 20:24:09,001 - Recv: >>> probe_at_point(256.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:09,005 - Recv:   current_position= X300.00 Y25.00 Z2.42 :
2020-01-25 20:24:09,009 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.42
2020-01-25 20:24:09,014 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:09,636 - Recv: echo:busy: processing
2020-01-25 20:24:10,025 - Recv:  T:18.12 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:24:10,054 - Recv:   current_position= X300.00 Y160.00 Z2.42 : set_probe_deployed
2020-01-25 20:24:10,058 - Recv: deploy: 1
2020-01-25 20:24:10,062 - Recv:   current_position= X300.00 Y160.00 Z2.42 : >>> run_z_probe
2020-01-25 20:24:10,066 - Recv:   current_position= X300.00 Y160.00 Z2.42 : >>> do_probe_move
2020-01-25 20:24:10,094 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 20:24:10,116 - Send: M500
2020-01-25 20:24:10,121 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:10,584 - Recv:   current_position= X300.00 Y160.00 Z-0.35 : sync_plan_position
2020-01-25 20:24:10,588 - Recv:   current_position= X300.00 Y160.00 Z-0.35 : <<< do_probe_move
2020-01-25 20:24:10,592 - Recv: 1st Probe Z:-0.35
2020-01-25 20:24:10,598 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.65
2020-01-25 20:24:10,602 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:11,136 - Recv:   current_position= X300.00 Y160.00 Z2.65 : >>> do_probe_move
2020-01-25 20:24:11,162 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 20:24:11,166 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:11,635 - Recv: echo:busy: processing
2020-01-25 20:24:12,023 - Recv:  T:18.55 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:24:12,042 - Recv:   current_position= X300.00 Y160.00 Z-0.27 : sync_plan_position
2020-01-25 20:24:12,046 - Recv:   current_position= X300.00 Y160.00 Z-0.27 : <<< do_probe_move
2020-01-25 20:24:12,049 - Recv: 2nd Probe Z:-0.27 Discrepancy:-0.08
2020-01-25 20:24:12,052 - Recv:   current_position= X300.00 Y160.00 Z-0.27 : <<< run_z_probe
2020-01-25 20:24:12,058 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.73
2020-01-25 20:24:12,062 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:12,578 - Recv: <<< probe_at_point
2020-01-25 20:24:12,583 - Recv: >>> probe_at_point(135.50, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:12,587 - Recv:   current_position= X300.00 Y160.00 Z2.73 :
2020-01-25 20:24:12,592 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.73
2020-01-25 20:24:12,596 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:13,548 - Recv:   current_position= X179.50 Y160.00 Z2.73 : set_probe_deployed
2020-01-25 20:24:13,559 - Recv: deploy: 1
2020-01-25 20:24:13,564 - Recv:   current_position= X179.50 Y160.00 Z2.73 : >>> run_z_probe
2020-01-25 20:24:13,568 - Recv:   current_position= X179.50 Y160.00 Z2.73 : >>> do_probe_move
2020-01-25 20:24:13,583 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 20:24:13,587 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:13,635 - Recv: echo:busy: processing
2020-01-25 20:24:14,024 - Recv:  T:18.98 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:24:14,073 - Recv:   current_position= X179.50 Y160.00 Z-0.01 : sync_plan_position
2020-01-25 20:24:14,077 - Recv:   current_position= X179.50 Y160.00 Z-0.01 : <<< do_probe_move
2020-01-25 20:24:14,081 - Recv: 1st Probe Z:-0.01
2020-01-25 20:24:14,085 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.99
2020-01-25 20:24:14,089 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:14,625 - Recv:   current_position= X179.50 Y160.00 Z2.99 : >>> do_probe_move
2020-01-25 20:24:14,652 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 20:24:14,656 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:15,510 - Recv:   current_position= X179.50 Y160.00 Z0.07 : sync_plan_position
2020-01-25 20:24:15,515 - Recv:   current_position= X179.50 Y160.00 Z0.07 : <<< do_probe_move
2020-01-25 20:24:15,522 - Recv: 2nd Probe Z:0.07 Discrepancy:-0.08
2020-01-25 20:24:15,527 - Recv:   current_position= X179.50 Y160.00 Z0.07 : <<< run_z_probe
2020-01-25 20:24:15,530 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z3.07
2020-01-25 20:24:15,534 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:15,636 - Recv: echo:busy: processing
2020-01-25 20:24:16,025 - Recv:  T:19.34 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:24:16,062 - Recv: <<< probe_at_point
2020-01-25 20:24:16,067 - Recv: >>> probe_at_point(15.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:16,072 - Recv:   current_position= X179.50 Y160.00 Z3.07 :
2020-01-25 20:24:16,077 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.07
2020-01-25 20:24:16,087 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:17,044 - Recv:   current_position= X59.00 Y160.00 Z3.07 : set_probe_deployed
2020-01-25 20:24:17,048 - Recv: deploy: 1
2020-01-25 20:24:17,053 - Recv:   current_position= X59.00 Y160.00 Z3.07 : >>> run_z_probe
2020-01-25 20:24:17,057 - Recv:   current_position= X59.00 Y160.00 Z3.07 : >>> do_probe_move
2020-01-25 20:24:17,078 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 20:24:17,082 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:17,573 - Recv:   current_position= X59.00 Y160.00 Z0.29 : sync_plan_position
2020-01-25 20:24:17,578 - Recv:   current_position= X59.00 Y160.00 Z0.29 : <<< do_probe_move
2020-01-25 20:24:17,583 - Recv: 1st Probe Z:0.29
2020-01-25 20:24:17,587 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.29
2020-01-25 20:24:17,591 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:17,635 - Recv: echo:busy: processing
2020-01-25 20:24:18,024 - Recv:  T:17.46 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:24:18,125 - Recv:   current_position= X59.00 Y160.00 Z3.29 : >>> do_probe_move
2020-01-25 20:24:18,151 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 20:24:18,156 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:19,010 - Recv:   current_position= X59.00 Y160.00 Z0.37 : sync_plan_position
2020-01-25 20:24:19,016 - Recv:   current_position= X59.00 Y160.00 Z0.37 : <<< do_probe_move
2020-01-25 20:24:19,020 - Recv: 2nd Probe Z:0.37 Discrepancy:-0.08
2020-01-25 20:24:19,025 - Recv:   current_position= X59.00 Y160.00 Z0.37 : <<< run_z_probe
2020-01-25 20:24:19,028 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.37
2020-01-25 20:24:19,032 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:19,562 - Recv: <<< probe_at_point
2020-01-25 20:24:19,566 - Recv: >>> probe_at_point(15.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:24:19,571 - Recv:   current_position= X59.00 Y160.00 Z3.37 :
2020-01-25 20:24:19,575 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.37
2020-01-25 20:24:19,579 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:19,635 - Recv: echo:busy: processing
2020-01-25 20:24:20,023 - Recv:  T:18.91 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:24:20,620 - Recv:   current_position= X59.00 Y295.00 Z3.37 : set_probe_deployed
2020-01-25 20:24:20,625 - Recv: deploy: 1
2020-01-25 20:24:20,632 - Recv:   current_position= X59.00 Y295.00 Z3.37 : >>> run_z_probe
2020-01-25 20:24:20,637 - Recv:   current_position= X59.00 Y295.00 Z3.37 : >>> do_probe_move
2020-01-25 20:24:20,655 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 20:24:20,659 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:21,155 - Recv:   current_position= X59.00 Y295.00 Z0.60 : sync_plan_position
2020-01-25 20:24:21,159 - Recv:   current_position= X59.00 Y295.00 Z0.60 : <<< do_probe_move
2020-01-25 20:24:21,163 - Recv: 1st Probe Z:0.60
2020-01-25 20:24:21,168 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.60
2020-01-25 20:24:21,171 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:21,635 - Recv: echo:busy: processing
2020-01-25 20:24:21,700 - Recv:   current_position= X59.00 Y295.00 Z3.60 : >>> do_probe_move
2020-01-25 20:24:21,726 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 20:24:21,730 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:22,023 - Recv:  T:19.57 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:24:22,589 - Recv:   current_position= X59.00 Y295.00 Z0.68 : sync_plan_position
2020-01-25 20:24:22,596 - Recv:   current_position= X59.00 Y295.00 Z0.68 : <<< do_probe_move
2020-01-25 20:24:22,602 - Recv: 2nd Probe Z:0.68 Discrepancy:-0.08
2020-01-25 20:24:22,606 - Recv:   current_position= X59.00 Y295.00 Z0.68 : <<< run_z_probe
2020-01-25 20:24:22,611 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.68
2020-01-25 20:24:22,615 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:23,137 - Recv: <<< probe_at_point
2020-01-25 20:24:23,142 - Recv: >>> probe_at_point(135.50, 285.00, raise, 0, probe_relative)
2020-01-25 20:24:23,146 - Recv:   current_position= X59.00 Y295.00 Z3.68 :
2020-01-25 20:24:23,151 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.68
2020-01-25 20:24:23,155 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:23,635 - Recv: echo:busy: processing
2020-01-25 20:24:24,025 - Recv:  T:18.40 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:24:24,108 - Recv:   current_position= X179.50 Y295.00 Z3.68 : set_probe_deployed
2020-01-25 20:24:24,113 - Recv: deploy: 1
2020-01-25 20:24:24,117 - Recv:   current_position= X179.50 Y295.00 Z3.68 : >>> run_z_probe
2020-01-25 20:24:24,121 - Recv:   current_position= X179.50 Y295.00 Z3.68 : >>> do_probe_move
2020-01-25 20:24:24,143 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 20:24:24,147 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:24,719 - Recv:   current_position= X179.50 Y295.00 Z0.24 : sync_plan_position
2020-01-25 20:24:24,731 - Recv:   current_position= X179.50 Y295.00 Z0.24 : <<< do_probe_move
2020-01-25 20:24:24,736 - Recv: 1st Probe Z:0.24
2020-01-25 20:24:24,739 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.24
2020-01-25 20:24:24,742 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:25,271 - Recv:   current_position= X179.50 Y295.00 Z3.24 : >>> do_probe_move
2020-01-25 20:24:25,298 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 20:24:25,302 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:25,634 - Recv: echo:busy: processing
2020-01-25 20:24:26,023 - Recv:  T:18.16 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:24:26,155 - Recv:   current_position= X179.50 Y295.00 Z0.32 : sync_plan_position
2020-01-25 20:24:26,159 - Recv:   current_position= X179.50 Y295.00 Z0.32 : <<< do_probe_move
2020-01-25 20:24:26,164 - Recv: 2nd Probe Z:0.32 Discrepancy:-0.08
2020-01-25 20:24:26,169 - Recv:   current_position= X179.50 Y295.00 Z0.32 : <<< run_z_probe
2020-01-25 20:24:26,173 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.33
2020-01-25 20:24:26,177 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:26,708 - Recv: <<< probe_at_point
2020-01-25 20:24:26,711 - Recv: >>> probe_at_point(256.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:24:26,716 - Recv:   current_position= X179.50 Y295.00 Z3.33 :
2020-01-25 20:24:26,720 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z3.33
2020-01-25 20:24:26,725 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:27,657 - Recv: echo:busy: processing
2020-01-25 20:24:27,678 - Recv:   current_position= X300.00 Y295.00 Z3.33 : set_probe_deployed
2020-01-25 20:24:27,683 - Recv: deploy: 1
2020-01-25 20:24:27,687 - Recv:   current_position= X300.00 Y295.00 Z3.33 : >>> run_z_probe
2020-01-25 20:24:27,690 - Recv:   current_position= X300.00 Y295.00 Z3.33 : >>> do_probe_move
2020-01-25 20:24:27,713 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 20:24:27,717 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:28,023 - Recv:  T:18.87 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:24:28,294 - Recv:   current_position= X300.00 Y295.00 Z-0.12 : sync_plan_position
2020-01-25 20:24:28,298 - Recv:   current_position= X300.00 Y295.00 Z-0.12 : <<< do_probe_move
2020-01-25 20:24:28,302 - Recv: 1st Probe Z:-0.12
2020-01-25 20:24:28,306 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.88
2020-01-25 20:24:28,309 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:28,846 - Recv:   current_position= X300.00 Y295.00 Z2.88 : >>> do_probe_move
2020-01-25 20:24:28,874 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 20:24:28,878 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:29,657 - Recv: echo:busy: processing
2020-01-25 20:24:29,732 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : sync_plan_position
2020-01-25 20:24:29,736 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : <<< do_probe_move
2020-01-25 20:24:29,741 - Recv: 2nd Probe Z:-0.05 Discrepancy:-0.08
2020-01-25 20:24:29,746 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : <<< run_z_probe
2020-01-25 20:24:29,749 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.95
2020-01-25 20:24:29,752 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:30,024 - Recv:  T:19.10 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:24:30,285 - Recv: <<< probe_at_point
2020-01-25 20:24:30,290 - Recv:   current_position= X300.00 Y295.00 Z2.95 : set_probe_deployed
2020-01-25 20:24:30,294 - Recv: deploy: 0
2020-01-25 20:24:30,298 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.95
2020-01-25 20:24:30,302 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:30,307 - Recv:   current_position= X300.00 Y295.00 Z2.95 : > probing complete
2020-01-25 20:24:30,312 - Recv: Extrapolate [ 1+  1+]
2020-01-25 20:24:30,316 - Recv:  (done)
2020-01-25 20:24:30,320 - Recv: Extrapolate [ 1-  1+]
2020-01-25 20:24:30,325 - Recv:  (done)
2020-01-25 20:24:30,330 - Recv: Extrapolate [ 1+  1-]
2020-01-25 20:24:30,334 - Recv:  (done)
2020-01-25 20:24:30,338 - Recv: Extrapolate [ 1-  1-]
2020-01-25 20:24:30,342 - Recv:  (done)
2020-01-25 20:24:30,346 - Recv: Extrapolate [ 1+  0+]
2020-01-25 20:24:30,350 - Recv:  (done)
2020-01-25 20:24:30,354 - Recv: Extrapolate [ 1-  0+]
2020-01-25 20:24:30,358 - Recv:  (done)
2020-01-25 20:24:30,361 - Recv: Extrapolate [ 1+  2-]
2020-01-25 20:24:30,366 - Recv:  (done)
2020-01-25 20:24:30,370 - Recv: Extrapolate [ 1-  2-]
2020-01-25 20:24:30,374 - Recv:  (done)
2020-01-25 20:24:30,376 - Recv: Extrapolate [ 0+  1+]
2020-01-25 20:24:30,378 - Recv:  (done)
2020-01-25 20:24:30,381 - Recv: Extrapolate [ 2-  1+]
2020-01-25 20:24:30,383 - Recv:  (done)
2020-01-25 20:24:30,385 - Recv: Extrapolate [ 0+  1-]
2020-01-25 20:24:30,387 - Recv:  (done)
2020-01-25 20:24:30,389 - Recv: Extrapolate [ 2-  1-]
2020-01-25 20:24:30,391 - Recv:  (done)
2020-01-25 20:24:30,394 - Recv: Extrapolate [ 0+  0+]
2020-01-25 20:24:30,396 - Recv:  (done)
2020-01-25 20:24:30,398 - Recv: Extrapolate [ 2-  0+]
2020-01-25 20:24:30,400 - Recv:  (done)
2020-01-25 20:24:30,402 - Recv: Extrapolate [ 0+  2-]
2020-01-25 20:24:30,404 - Recv:  (done)
2020-01-25 20:24:30,406 - Recv: Extrapolate [ 2-  2-]
2020-01-25 20:24:30,408 - Recv:  (done)
2020-01-25 20:24:30,410 - Recv: Bilinear Leveling Grid:
2020-01-25 20:24:30,412 - Recv:       0      1      2
2020-01-25 20:24:30,415 - Recv:  0 +0.120 -0.228 -0.609
2020-01-25 20:24:30,417 - Recv:  1 +0.336 +0.038 -0.307
2020-01-25 20:24:30,419 - Recv:  2 +0.645 +0.292 -0.080
2020-01-25 20:24:30,422 - Recv:
2020-01-25 20:24:30,423 - Recv: G29 uncorrected Z:2.95
2020-01-25 20:24:30,426 - Recv:  corrected Z:3.03
2020-01-25 20:24:30,428 - Recv: <<< G29
2020-01-25 20:24:30,430 - Recv:   current_position= X300.00 Y295.00 Z3.03 : sync_plan_position
2020-01-25 20:24:30,433 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 20:24:30,435 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:30,739 - Recv: X:300.00 Y:295.00 Z:5.00 E:0.00 Count X:30000 Y:29500 Z:1968
2020-01-25 20:24:30,745 - Recv: ok
2020-01-25 20:24:30,749 - Send: M503
2020-01-25 20:24:30,754 - Recv: echo:G29
2020-01-25 20:24:30,757 - Recv:   current_position= X300.00 Y295.00 Z5.00 : >>> G29
2020-01-25 20:24:30,759 - Recv: Machine Type: Cartesian
2020-01-25 20:24:30,761 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:24:30,764 - Recv: Probe Offset X-44.00 Y-10.00 Z0.00 (Left-Front & Same Z as Nozzle)
2020-01-25 20:24:30,766 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:24:30,769 - Recv:  (enabled)
2020-01-25 20:24:30,771 - Recv: ABL Adjustment Z-0.080
2020-01-25 20:24:30,774 - Recv:   current_position= X300.00 Y295.00 Z5.00 : Leveling ON
2020-01-25 20:24:30,776 - Recv:   current_position= X300.00 Y295.00 Z4.92 : ...Now OFF
2020-01-25 20:24:30,778 - Recv:   current_position= X300.00 Y295.00 Z4.92 : sync_plan_position
2020-01-25 20:24:30,781 - Recv:   current_position= X300.00 Y295.00 Z4.92 : set_probe_deployed
2020-01-25 20:24:30,783 - Recv: deploy: 1
2020-01-25 20:24:30,785 - Recv: do_probe_raise(5.00)
2020-01-25 20:24:30,788 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 20:24:30,790 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:30,933 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 20:24:30,936 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:30,939 - Recv: >>> probe_at_point(15.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:24:30,941 - Recv:   current_position= X300.00 Y295.00 Z5.00 :
2020-01-25 20:24:30,944 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z5.00
2020-01-25 20:24:30,947 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:32,025 - Recv:  T:18.52 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:24:32,757 - Recv: echo:busy: processing
2020-01-25 20:24:33,347 - Recv:   current_position= X59.00 Y25.00 Z5.00 : set_probe_deployed
2020-01-25 20:24:33,357 - Recv: deploy: 1
2020-01-25 20:24:33,362 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> run_z_probe
2020-01-25 20:24:33,367 - Recv:   current_position= X59.00 Y25.00 Z5.00 : >>> do_probe_move
2020-01-25 20:24:33,381 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 20:24:33,384 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:34,024 - Recv:  T:18.28 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:24:34,141 - Recv:   current_position= X59.00 Y25.00 Z0.11 : sync_plan_position
2020-01-25 20:24:34,146 - Recv:   current_position= X59.00 Y25.00 Z0.11 : <<< do_probe_move
2020-01-25 20:24:34,150 - Recv: 1st Probe Z:0.11
2020-01-25 20:24:34,154 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.11
2020-01-25 20:24:34,157 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:34,692 - Recv:   current_position= X59.00 Y25.00 Z3.11 : >>> do_probe_move
2020-01-25 20:24:34,719 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-2.00
2020-01-25 20:24:34,722 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:34,757 - Recv: echo:busy: processing
2020-01-25 20:24:35,576 - Recv:   current_position= X59.00 Y25.00 Z0.19 : sync_plan_position
2020-01-25 20:24:35,586 - Recv:   current_position= X59.00 Y25.00 Z0.19 : <<< do_probe_move
2020-01-25 20:24:35,590 - Recv: 2nd Probe Z:0.19 Discrepancy:-0.09
2020-01-25 20:24:35,595 - Recv:   current_position= X59.00 Y25.00 Z0.19 : <<< run_z_probe
2020-01-25 20:24:35,598 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z3.20
2020-01-25 20:24:35,602 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:36,023 - Recv:  T:18.83 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:24:36,127 - Recv: <<< probe_at_point
2020-01-25 20:24:36,131 - Recv: >>> probe_at_point(135.50, 15.00, raise, 0, probe_relative)
2020-01-25 20:24:36,135 - Recv:   current_position= X59.00 Y25.00 Z3.20 :
2020-01-25 20:24:36,139 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z3.20
2020-01-25 20:24:36,143 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:36,757 - Recv: echo:busy: processing
2020-01-25 20:24:37,098 - Recv:   current_position= X179.50 Y25.00 Z3.20 : set_probe_deployed
2020-01-25 20:24:37,109 - Recv: deploy: 1
2020-01-25 20:24:37,114 - Recv:   current_position= X179.50 Y25.00 Z3.20 : >>> run_z_probe
2020-01-25 20:24:37,118 - Recv:   current_position= X179.50 Y25.00 Z3.20 : >>> do_probe_move
2020-01-25 20:24:37,131 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 20:24:37,136 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:37,709 - Recv:   current_position= X179.50 Y25.00 Z-0.24 : sync_plan_position
2020-01-25 20:24:37,714 - Recv:   current_position= X179.50 Y25.00 Z-0.24 : <<< do_probe_move
2020-01-25 20:24:37,718 - Recv: 1st Probe Z:-0.24
2020-01-25 20:24:37,722 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.76
2020-01-25 20:24:37,726 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:38,023 - Recv:  T:19.41 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:24:38,261 - Recv:   current_position= X179.50 Y25.00 Z2.76 : >>> do_probe_move
2020-01-25 20:24:38,288 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-2.00
2020-01-25 20:24:38,292 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:38,758 - Recv: echo:busy: processing
2020-01-25 20:24:39,146 - Recv:   current_position= X179.50 Y25.00 Z-0.17 : sync_plan_position
2020-01-25 20:24:39,151 - Recv:   current_position= X179.50 Y25.00 Z-0.17 : <<< do_probe_move
2020-01-25 20:24:39,156 - Recv: 2nd Probe Z:-0.17 Discrepancy:-0.08
2020-01-25 20:24:39,160 - Recv:   current_position= X179.50 Y25.00 Z-0.17 : <<< run_z_probe
2020-01-25 20:24:39,165 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z2.83
2020-01-25 20:24:39,168 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:39,699 - Recv: <<< probe_at_point
2020-01-25 20:24:39,704 - Recv: >>> probe_at_point(256.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:24:39,708 - Recv:   current_position= X179.50 Y25.00 Z2.83 :
2020-01-25 20:24:39,711 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.83
2020-01-25 20:24:39,716 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:40,023 - Recv:  T:18.67 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:24:40,676 - Recv:   current_position= X300.00 Y25.00 Z2.83 : set_probe_deployed
2020-01-25 20:24:40,681 - Recv: deploy: 1
2020-01-25 20:24:40,685 - Recv:   current_position= X300.00 Y25.00 Z2.83 : >>> run_z_probe
2020-01-25 20:24:40,689 - Recv:   current_position= X300.00 Y25.00 Z2.83 : >>> do_probe_move
2020-01-25 20:24:40,704 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 20:24:40,708 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:40,762 - Recv: echo:busy: processing
2020-01-25 20:24:41,286 - Recv:   current_position= X300.00 Y25.00 Z-0.64 : sync_plan_position
2020-01-25 20:24:41,290 - Recv:   current_position= X300.00 Y25.00 Z-0.64 : <<< do_probe_move
2020-01-25 20:24:41,294 - Recv: 1st Probe Z:-0.64
2020-01-25 20:24:41,298 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.36
2020-01-25 20:24:41,302 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:41,837 - Recv:   current_position= X300.00 Y25.00 Z2.36 : >>> do_probe_move
2020-01-25 20:24:41,864 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-2.00
2020-01-25 20:24:41,869 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:42,022 - Recv:  T:18.28 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:24:42,723 - Recv:   current_position= X300.00 Y25.00 Z-0.56 : sync_plan_position
2020-01-25 20:24:42,731 - Recv:   current_position= X300.00 Y25.00 Z-0.56 : <<< do_probe_move
2020-01-25 20:24:42,738 - Recv: 2nd Probe Z:-0.56 Discrepancy:-0.08
2020-01-25 20:24:42,742 - Recv:   current_position= X300.00 Y25.00 Z-0.56 : <<< run_z_probe
2020-01-25 20:24:42,746 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z2.44
2020-01-25 20:24:42,751 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:42,761 - Recv: echo:busy: processing
2020-01-25 20:24:43,274 - Recv: <<< probe_at_point
2020-01-25 20:24:43,279 - Recv: >>> probe_at_point(256.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:43,284 - Recv:   current_position= X300.00 Y25.00 Z2.44 :
2020-01-25 20:24:43,288 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.44
2020-01-25 20:24:43,292 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:44,024 - Recv:  T:19.06 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:24:44,333 - Recv:   current_position= X300.00 Y160.00 Z2.44 : set_probe_deployed
2020-01-25 20:24:44,337 - Recv: deploy: 1
2020-01-25 20:24:44,342 - Recv:   current_position= X300.00 Y160.00 Z2.44 : >>> run_z_probe
2020-01-25 20:24:44,346 - Recv:   current_position= X300.00 Y160.00 Z2.44 : >>> do_probe_move
2020-01-25 20:24:44,367 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 20:24:44,371 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:44,762 - Recv: echo:busy: processing
2020-01-25 20:24:44,863 - Recv:   current_position= X300.00 Y160.00 Z-0.33 : sync_plan_position
2020-01-25 20:24:44,867 - Recv:   current_position= X300.00 Y160.00 Z-0.33 : <<< do_probe_move
2020-01-25 20:24:44,872 - Recv: 1st Probe Z:-0.33
2020-01-25 20:24:44,877 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.67
2020-01-25 20:24:44,880 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:45,415 - Recv:   current_position= X300.00 Y160.00 Z2.67 : >>> do_probe_move
2020-01-25 20:24:45,443 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-2.00
2020-01-25 20:24:45,447 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:46,023 - Recv:  T:18.95 /0.00 B:18.28 /0.00 @:0 B@:0
2020-01-25 20:24:46,301 - Recv:   current_position= X300.00 Y160.00 Z-0.26 : sync_plan_position
2020-01-25 20:24:46,306 - Recv:   current_position= X300.00 Y160.00 Z-0.26 : <<< do_probe_move
2020-01-25 20:24:46,310 - Recv: 2nd Probe Z:-0.26 Discrepancy:-0.08
2020-01-25 20:24:46,315 - Recv:   current_position= X300.00 Y160.00 Z-0.26 : <<< run_z_probe
2020-01-25 20:24:46,319 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z2.74
2020-01-25 20:24:46,323 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:46,761 - Recv: echo:busy: processing
2020-01-25 20:24:46,854 - Recv: <<< probe_at_point
2020-01-25 20:24:46,859 - Recv: >>> probe_at_point(135.50, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:46,863 - Recv:   current_position= X300.00 Y160.00 Z2.74 :
2020-01-25 20:24:46,867 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z2.74
2020-01-25 20:24:46,871 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:47,825 - Recv:   current_position= X179.50 Y160.00 Z2.74 : set_probe_deployed
2020-01-25 20:24:47,834 - Recv: deploy: 1
2020-01-25 20:24:47,841 - Recv:   current_position= X179.50 Y160.00 Z2.74 : >>> run_z_probe
2020-01-25 20:24:47,846 - Recv:   current_position= X179.50 Y160.00 Z2.74 : >>> do_probe_move
2020-01-25 20:24:47,859 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 20:24:47,863 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:48,023 - Recv:  T:19.02 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:24:48,350 - Recv:   current_position= X179.50 Y160.00 Z0.00 : sync_plan_position
2020-01-25 20:24:48,354 - Recv:   current_position= X179.50 Y160.00 Z0.00 : <<< do_probe_move
2020-01-25 20:24:48,359 - Recv: 1st Probe Z:0.00
2020-01-25 20:24:48,363 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z3.01
2020-01-25 20:24:48,367 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:48,761 - Recv: echo:busy: processing
2020-01-25 20:24:48,901 - Recv:   current_position= X179.50 Y160.00 Z3.01 : >>> do_probe_move
2020-01-25 20:24:48,928 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-2.00
2020-01-25 20:24:48,933 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:49,788 - Recv:   current_position= X179.50 Y160.00 Z0.08 : sync_plan_position
2020-01-25 20:24:49,792 - Recv:   current_position= X179.50 Y160.00 Z0.08 : <<< do_probe_move
2020-01-25 20:24:49,796 - Recv: 2nd Probe Z:0.08 Discrepancy:-0.07
2020-01-25 20:24:49,800 - Recv:   current_position= X179.50 Y160.00 Z0.08 : <<< run_z_probe
2020-01-25 20:24:49,805 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z3.08
2020-01-25 20:24:49,808 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:50,023 - Recv:  T:18.71 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:24:50,339 - Recv: <<< probe_at_point
2020-01-25 20:24:50,344 - Recv: >>> probe_at_point(15.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:24:50,348 - Recv:   current_position= X179.50 Y160.00 Z3.08 :
2020-01-25 20:24:50,352 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.08
2020-01-25 20:24:50,356 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:50,761 - Recv: echo:busy: processing
2020-01-25 20:24:51,322 - Recv:   current_position= X59.00 Y160.00 Z3.08 : set_probe_deployed
2020-01-25 20:24:51,327 - Recv: deploy: 1
2020-01-25 20:24:51,330 - Recv:   current_position= X59.00 Y160.00 Z3.08 : >>> run_z_probe
2020-01-25 20:24:51,335 - Recv:   current_position= X59.00 Y160.00 Z3.08 : >>> do_probe_move
2020-01-25 20:24:51,356 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 20:24:51,360 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:51,850 - Recv:   current_position= X59.00 Y160.00 Z0.30 : sync_plan_position
2020-01-25 20:24:51,855 - Recv:   current_position= X59.00 Y160.00 Z0.30 : <<< do_probe_move
2020-01-25 20:24:51,860 - Recv: 1st Probe Z:0.30
2020-01-25 20:24:51,863 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.31
2020-01-25 20:24:51,868 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:52,022 - Recv:  T:18.95 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:24:52,401 - Recv:   current_position= X59.00 Y160.00 Z3.31 : >>> do_probe_move
2020-01-25 20:24:52,429 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-2.00
2020-01-25 20:24:52,434 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:52,761 - Recv: echo:busy: processing
2020-01-25 20:24:53,288 - Recv:   current_position= X59.00 Y160.00 Z0.38 : sync_plan_position
2020-01-25 20:24:53,293 - Recv:   current_position= X59.00 Y160.00 Z0.38 : <<< do_probe_move
2020-01-25 20:24:53,301 - Recv: 2nd Probe Z:0.38 Discrepancy:-0.07
2020-01-25 20:24:53,306 - Recv:   current_position= X59.00 Y160.00 Z0.38 : <<< run_z_probe
2020-01-25 20:24:53,309 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z3.38
2020-01-25 20:24:53,314 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:53,841 - Recv: <<< probe_at_point
2020-01-25 20:24:53,846 - Recv: >>> probe_at_point(15.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:24:53,850 - Recv:   current_position= X59.00 Y160.00 Z3.38 :
2020-01-25 20:24:53,854 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.38
2020-01-25 20:24:53,858 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:54,023 - Recv:  T:19.10 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:24:54,762 - Recv: echo:busy: processing
2020-01-25 20:24:54,898 - Recv:   current_position= X59.00 Y295.00 Z3.38 : set_probe_deployed
2020-01-25 20:24:54,903 - Recv: deploy: 1
2020-01-25 20:24:54,907 - Recv:   current_position= X59.00 Y295.00 Z3.38 : >>> run_z_probe
2020-01-25 20:24:54,911 - Recv:   current_position= X59.00 Y295.00 Z3.38 : >>> do_probe_move
2020-01-25 20:24:54,933 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 20:24:54,937 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:55,429 - Recv:   current_position= X59.00 Y295.00 Z0.60 : sync_plan_position
2020-01-25 20:24:55,434 - Recv:   current_position= X59.00 Y295.00 Z0.60 : <<< do_probe_move
2020-01-25 20:24:55,439 - Recv: 1st Probe Z:0.60
2020-01-25 20:24:55,443 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.60
2020-01-25 20:24:55,447 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:55,980 - Recv:   current_position= X59.00 Y295.00 Z3.60 : >>> do_probe_move
2020-01-25 20:24:56,008 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-2.00
2020-01-25 20:24:56,012 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:56,022 - Recv:  T:20.31 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:24:56,761 - Recv: echo:busy: processing
2020-01-25 20:24:56,864 - Recv:   current_position= X59.00 Y295.00 Z0.69 : sync_plan_position
2020-01-25 20:24:56,868 - Recv:   current_position= X59.00 Y295.00 Z0.69 : <<< do_probe_move
2020-01-25 20:24:56,873 - Recv: 2nd Probe Z:0.69 Discrepancy:-0.09
2020-01-25 20:24:56,877 - Recv:   current_position= X59.00 Y295.00 Z0.69 : <<< run_z_probe
2020-01-25 20:24:56,881 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z3.69
2020-01-25 20:24:56,886 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:57,416 - Recv: <<< probe_at_point
2020-01-25 20:24:57,421 - Recv: >>> probe_at_point(135.50, 285.00, raise, 0, probe_relative)
2020-01-25 20:24:57,426 - Recv:   current_position= X59.00 Y295.00 Z3.69 :
2020-01-25 20:24:57,430 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.69
2020-01-25 20:24:57,434 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:58,022 - Recv:  T:19.02 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:24:58,387 - Recv:   current_position= X179.50 Y295.00 Z3.69 : set_probe_deployed
2020-01-25 20:24:58,392 - Recv: deploy: 1
2020-01-25 20:24:58,399 - Recv:   current_position= X179.50 Y295.00 Z3.69 : >>> run_z_probe
2020-01-25 20:24:58,404 - Recv:   current_position= X179.50 Y295.00 Z3.69 : >>> do_probe_move
2020-01-25 20:24:58,422 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 20:24:58,426 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:58,761 - Recv: echo:busy: processing
2020-01-25 20:24:59,000 - Recv:   current_position= X179.50 Y295.00 Z0.25 : sync_plan_position
2020-01-25 20:24:59,004 - Recv:   current_position= X179.50 Y295.00 Z0.25 : <<< do_probe_move
2020-01-25 20:24:59,009 - Recv: 1st Probe Z:0.25
2020-01-25 20:24:59,013 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.25
2020-01-25 20:24:59,017 - Recv: <<< do_blocking_move_to
2020-01-25 20:24:59,551 - Recv:   current_position= X179.50 Y295.00 Z3.25 : >>> do_probe_move
2020-01-25 20:24:59,579 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-2.00
2020-01-25 20:24:59,584 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:00,023 - Recv:  T:19.02 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:25:00,437 - Recv:   current_position= X179.50 Y295.00 Z0.33 : sync_plan_position
2020-01-25 20:25:00,442 - Recv:   current_position= X179.50 Y295.00 Z0.33 : <<< do_probe_move
2020-01-25 20:25:00,446 - Recv: 2nd Probe Z:0.33 Discrepancy:-0.08
2020-01-25 20:25:00,451 - Recv:   current_position= X179.50 Y295.00 Z0.33 : <<< run_z_probe
2020-01-25 20:25:00,455 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z3.33
2020-01-25 20:25:00,459 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:00,771 - Recv: echo:busy: processing
2020-01-25 20:25:00,989 - Recv: <<< probe_at_point
2020-01-25 20:25:00,995 - Recv: >>> probe_at_point(256.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:25:00,999 - Recv:   current_position= X179.50 Y295.00 Z3.33 :
2020-01-25 20:25:01,003 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z3.33
2020-01-25 20:25:01,007 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:01,960 - Recv:   current_position= X300.00 Y295.00 Z3.33 : set_probe_deployed
2020-01-25 20:25:01,971 - Recv: deploy: 1
2020-01-25 20:25:01,977 - Recv:   current_position= X300.00 Y295.00 Z3.33 : >>> run_z_probe
2020-01-25 20:25:01,980 - Recv:   current_position= X300.00 Y295.00 Z3.33 : >>> do_probe_move
2020-01-25 20:25:01,995 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 20:25:01,999 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:02,023 - Recv:  T:18.32 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:25:02,576 - Recv:   current_position= X300.00 Y295.00 Z-0.13 : sync_plan_position
2020-01-25 20:25:02,581 - Recv:   current_position= X300.00 Y295.00 Z-0.13 : <<< do_probe_move
2020-01-25 20:25:02,585 - Recv: 1st Probe Z:-0.13
2020-01-25 20:25:02,590 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.87
2020-01-25 20:25:02,594 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:02,769 - Recv: echo:busy: processing
2020-01-25 20:25:03,130 - Recv:   current_position= X300.00 Y295.00 Z2.87 : >>> do_probe_move
2020-01-25 20:25:03,154 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-2.00
2020-01-25 20:25:03,159 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:04,014 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : sync_plan_position
2020-01-25 20:25:04,021 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : <<< do_probe_move
2020-01-25 20:25:04,028 - Recv: 2nd Probe Z:-0.05 Discrepancy:-0.08
2020-01-25 20:25:04,034 - Recv:   current_position= X300.00 Y295.00 Z-0.05 : <<< run_z_probe
2020-01-25 20:25:04,038 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.95
2020-01-25 20:25:04,042 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:04,046 - Recv:  T:18.32 /0.00 B:17.85 /0.00 @:0 B@:0
2020-01-25 20:25:04,565 - Recv: <<< probe_at_point
2020-01-25 20:25:04,569 - Recv:   current_position= X300.00 Y295.00 Z2.95 : set_probe_deployed
2020-01-25 20:25:04,574 - Recv: deploy: 0
2020-01-25 20:25:04,579 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z2.95
2020-01-25 20:25:04,583 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:04,587 - Recv:   current_position= X300.00 Y295.00 Z2.95 : > probing complete
2020-01-25 20:25:04,592 - Recv: Extrapolate [ 1+  1+]
2020-01-25 20:25:04,596 - Recv:  (done)
2020-01-25 20:25:04,602 - Recv: Extrapolate [ 1-  1+]
2020-01-25 20:25:04,605 - Recv:  (done)
2020-01-25 20:25:04,609 - Recv: Extrapolate [ 1+  1-]
2020-01-25 20:25:04,614 - Recv:  (done)
2020-01-25 20:25:04,618 - Recv: Extrapolate [ 1-  1-]
2020-01-25 20:25:04,622 - Recv:  (done)
2020-01-25 20:25:04,627 - Recv: Extrapolate [ 1+  0+]
2020-01-25 20:25:04,630 - Recv:  (done)
2020-01-25 20:25:04,634 - Recv: Extrapolate [ 1-  0+]
2020-01-25 20:25:04,637 - Recv:  (done)
2020-01-25 20:25:04,643 - Recv: Extrapolate [ 1+  2-]
2020-01-25 20:25:04,646 - Recv:  (done)
2020-01-25 20:25:04,650 - Recv: Extrapolate [ 1-  2-]
2020-01-25 20:25:04,654 - Recv:  (done)
2020-01-25 20:25:04,659 - Recv: Extrapolate [ 0+  1+]
2020-01-25 20:25:04,663 - Recv:  (done)
2020-01-25 20:25:04,668 - Recv: Extrapolate [ 2-  1+]
2020-01-25 20:25:04,671 - Recv:  (done)
2020-01-25 20:25:04,674 - Recv: Extrapolate [ 0+  1-]
2020-01-25 20:25:04,678 - Recv:  (done)
2020-01-25 20:25:04,682 - Recv: Extrapolate [ 2-  1-]
2020-01-25 20:25:04,686 - Recv:  (done)
2020-01-25 20:25:04,690 - Recv: Extrapolate [ 0+  0+]
2020-01-25 20:25:04,695 - Recv:  (done)
2020-01-25 20:25:04,699 - Recv: Extrapolate [ 2-  0+]
2020-01-25 20:25:04,702 - Recv:  (done)
2020-01-25 20:25:04,704 - Recv: Extrapolate [ 0+  2-]
2020-01-25 20:25:04,706 - Recv:  (done)
2020-01-25 20:25:04,708 - Recv: Extrapolate [ 2-  2-]
2020-01-25 20:25:04,710 - Recv:  (done)
2020-01-25 20:25:04,712 - Recv: Bilinear Leveling Grid:
2020-01-25 20:25:04,715 - Recv:       0      1      2
2020-01-25 20:25:04,717 - Recv:  0 +0.160 -0.198 -0.591
2020-01-25 20:25:04,719 - Recv:  1 +0.350 +0.050 -0.288
2020-01-25 20:25:04,721 - Recv:  2 +0.652 +0.299 -0.079
2020-01-25 20:25:04,723 - Recv:
2020-01-25 20:25:04,726 - Recv: G29 uncorrected Z:2.95
2020-01-25 20:25:04,728 - Recv:  corrected Z:3.03
2020-01-25 20:25:04,730 - Recv: <<< G29
2020-01-25 20:25:04,733 - Recv:   current_position= X300.00 Y295.00 Z3.03 : sync_plan_position
2020-01-25 20:25:04,735 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 20:25:04,737 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:04,770 - Recv: echo:busy: processing
2020-01-25 20:25:05,020 - Recv: X:300.00 Y:295.00 Z:5.00 E:0.00 Count X:30000 Y:29500 Z:1968
2020-01-25 20:25:05,025 - Recv: ok
2020-01-25 20:25:05,038 - Recv: echo:M851 Z-1.65
2020-01-25 20:25:05,040 - Recv: ok
2020-01-25 20:25:05,054 - Recv: echo:M500
2020-01-25 20:25:05,204 - Recv: echo:Settings Stored (635 bytes; crc 62226)
2020-01-25 20:25:05,206 - Recv: ok
2020-01-25 20:25:05,217 - Recv: echo:M503
2020-01-25 20:25:05,219 - Recv: echo:  G21    ; Units in mm (mm)
2020-01-25 20:25:05,221 - Recv: echo:  M149 C ; Units in Celsius
2020-01-25 20:25:05,224 - Recv:
2020-01-25 20:25:05,226 - Recv: echo:Filament settings: Disabled
2020-01-25 20:25:05,228 - Recv: echo:  M200 D1.75
2020-01-25 20:25:05,231 - Recv: echo:  M200 D0
2020-01-25 20:25:05,233 - Recv: echo:Steps per unit:
2020-01-25 20:25:05,235 - Recv: echo: M92 X100.00 Y100.00 Z400.00 E463.00
2020-01-25 20:25:05,238 - Recv: echo:Maximum feedrates (units/s):
2020-01-25 20:25:05,240 - Recv: echo:  M203 X300.00 Y300.00 Z15.00 E50.00
2020-01-25 20:25:05,243 - Recv: echo:Maximum Acceleration (units/s2):
2020-01-25 20:25:05,245 - Recv: echo:  M201 X2000.00 Y2000.00 Z100.00 E10000.00
2020-01-25 20:25:05,247 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2020-01-25 20:25:05,250 - Recv: echo:  M204 P1000.00 R1000.00 T1000.00
2020-01-25 20:25:05,252 - Recv: echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
2020-01-25 20:25:05,255 - Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.01
2020-01-25 20:25:05,257 - Recv: echo:Home offset:
2020-01-25 20:25:05,259 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-01-25 20:25:05,262 - Recv: echo:Auto Bed Leveling:
2020-01-25 20:25:05,264 - Recv: echo:  M420 S1 Z0.00
2020-01-25 20:25:05,266 - Recv: echo:  G29 W I0 J0 Z0.16000
2020-01-25 20:25:05,269 - Recv: echo:  G29 W I1 J0 Z-0.19850
2020-01-25 20:25:05,271 - Recv: echo:  G29 W I2 J0 Z-0.59050
2020-01-25 20:25:05,273 - Recv: echo:  G29 W I0 J1 Z0.35000
2020-01-25 20:25:05,275 - Recv: echo:  G29 W I1 J1 Z0.05000
2020-01-25 20:25:05,278 - Recv: echo:  G29 W I2 J1 Z-0.28850
2020-01-25 20:25:05,280 - Recv: echo:  G29 W I0 J2 Z0.65250
2020-01-25 20:25:05,282 - Recv: echo:  G29 W I1 J2 Z0.29900
2020-01-25 20:25:05,284 - Recv: echo:  G29 W I2 J2 Z-0.07950
2020-01-25 20:25:05,286 - Recv: echo:Material heatup parameters:
2020-01-25 20:25:05,289 - Recv: echo:  M145 S0 H220 B60 F0
2020-01-25 20:25:05,290 - Recv: echo:  M145 S1 H240 B100 F0
2020-01-25 20:25:05,293 - Recv: echo:PID settings:
2020-01-25 20:25:05,295 - Recv: echo:  M301 P22.20 I1.08 D114.00
2020-01-25 20:25:05,297 - Recv: echo:Z-Probe Offset (mm):
2020-01-25 20:25:05,299 - Recv: echo:  M851 X-44.00 Y-10.00 Z-1.65
2020-01-25 20:25:05,302 - Recv: echo:Filament load/unload lengths:
2020-01-25 20:25:05,304 - Recv: echo:  M603 L0.00 U100.00
2020-01-25 20:25:05,306 - Recv: echo:Filament runout sensor:
2020-01-25 20:25:05,308 - Recv: echo:  M412 S1
2020-01-25 20:25:05,310 - Recv: ok
2020-01-25 20:25:06,031 - Recv:  T:18.83 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:25:08,031 - Recv:  T:18.36 /0.00 B:19.34 /0.00 @:0 B@:0
2020-01-25 20:25:10,030 - Recv:  T:19.57 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:25:12,031 - Recv:  T:18.67 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:25:14,031 - Recv:  T:19.57 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:25:16,030 - Recv:  T:18.75 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:25:18,032 - Recv:  T:19.45 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:25:20,032 - Recv:  T:18.71 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:25:22,032 - Recv:  T:18.71 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:25:24,031 - Recv:  T:18.79 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:25:26,032 - Recv:  T:18.63 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:25:28,032 - Recv:  T:18.95 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:25:28,598 - Send: M502
2020-01-25 20:25:28,618 - Recv: echo:M502
2020-01-25 20:25:28,625 - Recv: reset_bed_level
2020-01-25 20:25:28,630 - Recv:   current_position= X300.00 Y295.00 Z5.00 : Leveling ON
2020-01-25 20:25:28,633 - Recv:   current_position= X300.00 Y295.00 Z4.92 : ...Now OFF
2020-01-25 20:25:28,638 - Recv:   current_position= X300.00 Y295.00 Z4.92 : sync_plan_position
2020-01-25 20:25:28,643 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:28,647 - Recv: Axis X min:0.00 max:300.00
2020-01-25 20:25:28,651 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:28,655 - Recv: Axis Y min:0.00 max:300.00
2020-01-25 20:25:28,660 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:28,663 - Recv: Axis Z min:0.00 max:300.00
2020-01-25 20:25:28,666 - Recv: echo:Hardcoded Default Settings Loaded
2020-01-25 20:25:28,669 - Recv: ok
2020-01-25 20:25:30,032 - Recv:  T:18.63 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:25:32,031 - Recv:  T:19.26 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:25:32,551 - Send: M851 Z-1.65
2020-01-25 20:25:32,572 - Recv: echo:M851 Z-1.65
2020-01-25 20:25:32,577 - Recv: ok
2020-01-25 20:25:33,565 - Send: M500
2020-01-25 20:25:33,573 - Recv: echo:M500
2020-01-25 20:25:33,759 - Recv: echo:Settings Stored (635 bytes; crc 31998)
2020-01-25 20:25:33,762 - Recv: ok
2020-01-25 20:25:34,030 - Recv:  T:18.75 /0.00 B:19.34 /0.00 @:0 B@:0
2020-01-25 20:25:35,235 - Send: G28
2020-01-25 20:25:35,252 - Recv: echo:G28
2020-01-25 20:25:35,256 - Recv: >>> G28
2020-01-25 20:25:35,260 - Recv: Machine Type: Cartesian
2020-01-25 20:25:35,265 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:25:35,272 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:25:35,277 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:25:35,281 - Recv:  (disabled)
2020-01-25 20:25:35,285 - Recv:
2020-01-25 20:25:35,289 - Recv:   current_position= X0.00 Y0.00 Z4.92 : sync_plan_position
2020-01-25 20:25:35,292 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z4.92
2020-01-25 20:25:35,296 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:36,032 - Recv:  T:19.37 /0.00 B:18.12 /0.00 @:0 B@:0
2020-01-25 20:25:36,671 - Send: G29
2020-01-25 20:25:37,240 - Recv: echo:busy: processing
2020-01-25 20:25:38,031 - Recv:  T:19.88 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:25:39,239 - Recv: echo:busy: processing
2020-01-25 20:25:40,032 - Recv:  T:17.70 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:25:41,239 - Recv: echo:busy: processing
2020-01-25 20:25:41,311 - Recv: >>> homeaxis(X)
2020-01-25 20:25:41,314 - Recv: Home 1 Fast:
2020-01-25 20:25:41,319 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:25:41,549 - Recv: <<< do_homing_move(X)
2020-01-25 20:25:41,553 - Recv: Move Away:
2020-01-25 20:25:41,557 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:25:41,795 - Recv: <<< do_homing_move(X)
2020-01-25 20:25:41,800 - Recv: Home 2 Slow:
2020-01-25 20:25:41,803 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:25:42,031 - Recv:  T:19.14 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:25:42,116 - Recv: <<< do_homing_move(X)
2020-01-25 20:25:42,121 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:25:42,125 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:42,130 - Recv: > home_offset[X] = 0.00
2020-01-25 20:25:42,134 - Recv:   current_position= X0.00 Y0.00 Z4.92 :
2020-01-25 20:25:42,138 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:25:42,141 - Recv:   current_position= X0.00 Y0.00 Z4.92 : sync_plan_position
2020-01-25 20:25:42,144 - Recv:   current_position= X0.00 Y0.00 Z4.92 : > AFTER set_axis_is_at_home
2020-01-25 20:25:42,147 - Recv: <<< homeaxis(X)
2020-01-25 20:25:42,152 - Recv: >>> homeaxis(Y)
2020-01-25 20:25:42,157 - Recv: Home 1 Fast:
2020-01-25 20:25:42,161 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:25:42,241 - Recv: <<< do_homing_move(Y)
2020-01-25 20:25:42,246 - Recv: Move Away:
2020-01-25 20:25:42,250 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:25:42,488 - Recv: <<< do_homing_move(Y)
2020-01-25 20:25:42,492 - Recv: Home 2 Slow:
2020-01-25 20:25:42,495 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:25:42,812 - Recv: <<< do_homing_move(Y)
2020-01-25 20:25:42,817 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:25:42,822 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:42,826 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:25:42,830 - Recv:   current_position= X0.00 Y0.00 Z4.92 :
2020-01-25 20:25:42,836 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:25:42,840 - Recv:   current_position= X0.00 Y0.00 Z4.92 : sync_plan_position
2020-01-25 20:25:42,845 - Recv:   current_position= X0.00 Y0.00 Z4.92 : > AFTER set_axis_is_at_home
2020-01-25 20:25:42,848 - Recv: <<< homeaxis(Y)
2020-01-25 20:25:42,852 - Recv: home_z_safely >>>
2020-01-25 20:25:42,857 - Recv:   current_position= X0.00 Y0.00 Z4.92 : sync_plan_position
2020-01-25 20:25:42,861 - Recv:   destination= X194.00 Y160.00 Z6.57 : home_z_safely
2020-01-25 20:25:42,865 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.92
2020-01-25 20:25:42,869 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:43,239 - Recv: echo:busy: processing
2020-01-25 20:25:44,032 - Recv:  T:18.79 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:25:44,576 - Recv: >>> homeaxis(Z)
2020-01-25 20:25:44,580 - Recv:   current_position= X194.00 Y160.00 Z4.92 : set_probe_deployed
2020-01-25 20:25:44,584 - Recv: deploy: 1
2020-01-25 20:25:44,589 - Recv: do_probe_raise(5.00)
2020-01-25 20:25:44,593 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:25:44,597 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:44,977 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:25:44,981 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:44,986 - Recv: Home 1 Fast:
2020-01-25 20:25:44,990 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:25:45,240 - Recv: echo:busy: processing
2020-01-25 20:25:45,993 - Recv: <<< do_homing_move(Z)
2020-01-25 20:25:45,998 - Recv: Move Away:
2020-01-25 20:25:46,002 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:25:46,030 - Recv:  T:18.48 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:25:46,537 - Recv: <<< do_homing_move(Z)
2020-01-25 20:25:46,542 - Recv: Home 2 Slow:
2020-01-25 20:25:46,546 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:25:47,240 - Recv: echo:busy: processing
2020-01-25 20:25:47,421 - Recv: <<< do_homing_move(Z)
2020-01-25 20:25:47,427 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:25:47,431 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:25:47,435 - Recv: > probe_offset.z = -1.65
2020-01-25 20:25:47,440 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:25:47,444 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:25:47,449 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:25:47,453 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:25:47,458 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:25:47,462 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:25:47,466 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:25:47,470 - Recv: deploy: 0
2020-01-25 20:25:47,473 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:25:47,477 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:47,481 - Recv: <<< homeaxis(Z)
2020-01-25 20:25:47,485 - Recv: <<< home_z_safely
2020-01-25 20:25:47,489 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:25:47,494 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:48,030 - Recv:  T:18.32 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:25:48,040 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:25:48,043 - Recv: X:194.00 Y:160.00 Z:5.00 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:25:48,048 - Recv: <<< G28
2020-01-25 20:25:48,051 - Recv: ok
2020-01-25 20:25:48,054 - Recv: echo:G29
2020-01-25 20:25:48,056 - Recv:   current_position= X194.00 Y160.00 Z5.00 : >>> G29
2020-01-25 20:25:48,059 - Recv: Machine Type: Cartesian
2020-01-25 20:25:48,061 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:25:48,063 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:25:48,065 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:25:48,067 - Recv:  (disabled)
2020-01-25 20:25:48,069 - Recv:
2020-01-25 20:25:48,072 - Recv:   current_position= X194.00 Y160.00 Z5.00 : set_probe_deployed
2020-01-25 20:25:48,074 - Recv: deploy: 1
2020-01-25 20:25:48,076 - Recv: do_probe_raise(5.00)
2020-01-25 20:25:48,078 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:25:48,080 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:48,430 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:25:48,435 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:48,439 - Recv: reset_bed_level
2020-01-25 20:25:48,444 - Recv: >>> probe_at_point(15.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:25:48,448 - Recv:   current_position= X194.00 Y160.00 Z6.65 :
2020-01-25 20:25:48,452 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z6.65
2020-01-25 20:25:48,456 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:49,831 - Recv:   current_position= X59.00 Y25.00 Z6.65 : set_probe_deployed
2020-01-25 20:25:49,839 - Recv: deploy: 1
2020-01-25 20:25:49,850 - Recv:   current_position= X59.00 Y25.00 Z6.65 : >>> run_z_probe
2020-01-25 20:25:49,854 - Recv:   current_position= X59.00 Y25.00 Z6.65 : >>> do_probe_move
2020-01-25 20:25:49,866 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-0.35
2020-01-25 20:25:49,870 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:50,030 - Recv:  T:19.65 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:25:50,049 - Recv: echo:busy: processing
2020-01-25 20:25:50,630 - Recv:   current_position= X59.00 Y25.00 Z1.72 : sync_plan_position
2020-01-25 20:25:50,635 - Recv:   current_position= X59.00 Y25.00 Z1.72 : <<< do_probe_move
2020-01-25 20:25:50,639 - Recv: 1st Probe Z:1.72
2020-01-25 20:25:50,642 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z4.72
2020-01-25 20:25:50,647 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:51,181 - Recv:   current_position= X59.00 Y25.00 Z4.72 : >>> do_probe_move
2020-01-25 20:25:51,209 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z-0.35
2020-01-25 20:25:51,213 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:52,031 - Recv:  T:18.67 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:25:52,058 - Recv: echo:busy: processing
2020-01-25 20:25:52,066 - Recv:   current_position= X59.00 Y25.00 Z1.80 : sync_plan_position
2020-01-25 20:25:52,071 - Recv:   current_position= X59.00 Y25.00 Z1.80 : <<< do_probe_move
2020-01-25 20:25:52,075 - Recv: 2nd Probe Z:1.80 Discrepancy:-0.08
2020-01-25 20:25:52,079 - Recv:   current_position= X59.00 Y25.00 Z1.80 : <<< run_z_probe
2020-01-25 20:25:52,083 - Recv: >>> do_blocking_move_to X59.00 Y25.00 Z4.80
2020-01-25 20:25:52,087 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:52,617 - Recv: <<< probe_at_point
2020-01-25 20:25:52,622 - Recv: >>> probe_at_point(135.50, 15.00, raise, 0, probe_relative)
2020-01-25 20:25:52,626 - Recv:   current_position= X59.00 Y25.00 Z4.80 :
2020-01-25 20:25:52,630 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z4.80
2020-01-25 20:25:52,634 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:53,588 - Recv:   current_position= X179.50 Y25.00 Z4.80 : set_probe_deployed
2020-01-25 20:25:53,600 - Recv: deploy: 1
2020-01-25 20:25:53,605 - Recv:   current_position= X179.50 Y25.00 Z4.80 : >>> run_z_probe
2020-01-25 20:25:53,609 - Recv:   current_position= X179.50 Y25.00 Z4.80 : >>> do_probe_move
2020-01-25 20:25:53,622 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-0.35
2020-01-25 20:25:53,627 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:54,030 - Recv:  T:19.77 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:25:54,049 - Recv: echo:busy: processing
2020-01-25 20:25:54,201 - Recv:   current_position= X179.50 Y25.00 Z1.36 : sync_plan_position
2020-01-25 20:25:54,206 - Recv:   current_position= X179.50 Y25.00 Z1.36 : <<< do_probe_move
2020-01-25 20:25:54,210 - Recv: 1st Probe Z:1.36
2020-01-25 20:25:54,215 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z4.36
2020-01-25 20:25:54,219 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:54,752 - Recv:   current_position= X179.50 Y25.00 Z4.36 : >>> do_probe_move
2020-01-25 20:25:54,780 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z-0.35
2020-01-25 20:25:54,786 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:55,647 - Recv:   current_position= X179.50 Y25.00 Z1.44 : sync_plan_position
2020-01-25 20:25:55,654 - Recv:   current_position= X179.50 Y25.00 Z1.44 : <<< do_probe_move
2020-01-25 20:25:55,656 - Recv: 2nd Probe Z:1.44 Discrepancy:-0.08
2020-01-25 20:25:55,659 - Recv:   current_position= X179.50 Y25.00 Z1.44 : <<< run_z_probe
2020-01-25 20:25:55,661 - Recv: >>> do_blocking_move_to X179.50 Y25.00 Z4.44
2020-01-25 20:25:55,663 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:56,031 - Recv:  T:19.06 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:25:56,049 - Recv: echo:busy: processing
2020-01-25 20:25:56,199 - Recv: <<< probe_at_point
2020-01-25 20:25:56,203 - Recv: >>> probe_at_point(256.00, 15.00, raise, 0, probe_relative)
2020-01-25 20:25:56,208 - Recv:   current_position= X179.50 Y25.00 Z4.44 :
2020-01-25 20:25:56,211 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z4.44
2020-01-25 20:25:56,214 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:57,170 - Recv:   current_position= X300.00 Y25.00 Z4.44 : set_probe_deployed
2020-01-25 20:25:57,182 - Recv: deploy: 1
2020-01-25 20:25:57,186 - Recv:   current_position= X300.00 Y25.00 Z4.44 : >>> run_z_probe
2020-01-25 20:25:57,190 - Recv:   current_position= X300.00 Y25.00 Z4.44 : >>> do_probe_move
2020-01-25 20:25:57,204 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-0.35
2020-01-25 20:25:57,209 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:57,787 - Recv:   current_position= X300.00 Y25.00 Z0.97 : sync_plan_position
2020-01-25 20:25:57,792 - Recv:   current_position= X300.00 Y25.00 Z0.97 : <<< do_probe_move
2020-01-25 20:25:57,796 - Recv: 1st Probe Z:0.97
2020-01-25 20:25:57,800 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z3.97
2020-01-25 20:25:57,804 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:58,030 - Recv:  T:18.79 /0.00 B:19.57 /0.00 @:0 B@:0
2020-01-25 20:25:58,048 - Recv: echo:busy: processing
2020-01-25 20:25:58,338 - Recv:   current_position= X300.00 Y25.00 Z3.97 : >>> do_probe_move
2020-01-25 20:25:58,366 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z-0.35
2020-01-25 20:25:58,370 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:59,221 - Recv:   current_position= X300.00 Y25.00 Z1.06 : sync_plan_position
2020-01-25 20:25:59,233 - Recv:   current_position= X300.00 Y25.00 Z1.06 : <<< do_probe_move
2020-01-25 20:25:59,238 - Recv: 2nd Probe Z:1.06 Discrepancy:-0.09
2020-01-25 20:25:59,242 - Recv:   current_position= X300.00 Y25.00 Z1.06 : <<< run_z_probe
2020-01-25 20:25:59,246 - Recv: >>> do_blocking_move_to X300.00 Y25.00 Z4.06
2020-01-25 20:25:59,250 - Recv: <<< do_blocking_move_to
2020-01-25 20:25:59,774 - Recv: <<< probe_at_point
2020-01-25 20:25:59,779 - Recv: >>> probe_at_point(256.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:25:59,783 - Recv:   current_position= X300.00 Y25.00 Z4.06 :
2020-01-25 20:25:59,788 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z4.06
2020-01-25 20:25:59,791 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:00,032 - Recv:  T:18.09 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:26:00,050 - Recv: echo:busy: processing
2020-01-25 20:26:00,831 - Recv:   current_position= X300.00 Y160.00 Z4.06 : set_probe_deployed
2020-01-25 20:26:00,845 - Recv: deploy: 1
2020-01-25 20:26:00,848 - Recv:   current_position= X300.00 Y160.00 Z4.06 : >>> run_z_probe
2020-01-25 20:26:00,852 - Recv:   current_position= X300.00 Y160.00 Z4.06 : >>> do_probe_move
2020-01-25 20:26:00,866 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-0.35
2020-01-25 20:26:00,870 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:01,363 - Recv:   current_position= X300.00 Y160.00 Z1.27 : sync_plan_position
2020-01-25 20:26:01,367 - Recv:   current_position= X300.00 Y160.00 Z1.27 : <<< do_probe_move
2020-01-25 20:26:01,371 - Recv: 1st Probe Z:1.27
2020-01-25 20:26:01,376 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z4.27
2020-01-25 20:26:01,379 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:01,922 - Recv:   current_position= X300.00 Y160.00 Z4.27 : >>> do_probe_move
2020-01-25 20:26:01,950 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z-0.35
2020-01-25 20:26:01,954 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:02,030 - Recv:  T:18.98 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:26:02,048 - Recv: echo:busy: processing
2020-01-25 20:26:02,806 - Recv:   current_position= X300.00 Y160.00 Z1.36 : sync_plan_position
2020-01-25 20:26:02,811 - Recv:   current_position= X300.00 Y160.00 Z1.36 : <<< do_probe_move
2020-01-25 20:26:02,814 - Recv: 2nd Probe Z:1.36 Discrepancy:-0.09
2020-01-25 20:26:02,819 - Recv:   current_position= X300.00 Y160.00 Z1.36 : <<< run_z_probe
2020-01-25 20:26:02,824 - Recv: >>> do_blocking_move_to X300.00 Y160.00 Z4.36
2020-01-25 20:26:02,828 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:03,358 - Recv: <<< probe_at_point
2020-01-25 20:26:03,370 - Recv: >>> probe_at_point(135.50, 150.00, raise, 0, probe_relative)
2020-01-25 20:26:03,375 - Recv:   current_position= X300.00 Y160.00 Z4.36 :
2020-01-25 20:26:03,379 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z4.36
2020-01-25 20:26:03,383 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:04,030 - Recv:  T:19.06 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:26:04,052 - Recv: echo:busy: processing
2020-01-25 20:26:04,328 - Recv:   current_position= X179.50 Y160.00 Z4.36 : set_probe_deployed
2020-01-25 20:26:04,333 - Recv: deploy: 1
2020-01-25 20:26:04,337 - Recv:   current_position= X179.50 Y160.00 Z4.36 : >>> run_z_probe
2020-01-25 20:26:04,341 - Recv:   current_position= X179.50 Y160.00 Z4.36 : >>> do_probe_move
2020-01-25 20:26:04,363 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-0.35
2020-01-25 20:26:04,367 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:04,856 - Recv:   current_position= X179.50 Y160.00 Z1.61 : sync_plan_position
2020-01-25 20:26:04,861 - Recv:   current_position= X179.50 Y160.00 Z1.61 : <<< do_probe_move
2020-01-25 20:26:04,865 - Recv: 1st Probe Z:1.61
2020-01-25 20:26:04,869 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z4.61
2020-01-25 20:26:04,874 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:05,407 - Recv:   current_position= X179.50 Y160.00 Z4.61 : >>> do_probe_move
2020-01-25 20:26:05,434 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z-0.35
2020-01-25 20:26:05,439 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:06,030 - Recv:  T:18.36 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:26:06,051 - Recv: echo:busy: processing
2020-01-25 20:26:06,291 - Recv:   current_position= X179.50 Y160.00 Z1.69 : sync_plan_position
2020-01-25 20:26:06,296 - Recv:   current_position= X179.50 Y160.00 Z1.69 : <<< do_probe_move
2020-01-25 20:26:06,300 - Recv: 2nd Probe Z:1.69 Discrepancy:-0.08
2020-01-25 20:26:06,305 - Recv:   current_position= X179.50 Y160.00 Z1.69 : <<< run_z_probe
2020-01-25 20:26:06,309 - Recv: >>> do_blocking_move_to X179.50 Y160.00 Z4.69
2020-01-25 20:26:06,313 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:06,844 - Recv: <<< probe_at_point
2020-01-25 20:26:06,849 - Recv: >>> probe_at_point(15.00, 150.00, raise, 0, probe_relative)
2020-01-25 20:26:06,854 - Recv:   current_position= X179.50 Y160.00 Z4.69 :
2020-01-25 20:26:06,858 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z4.69
2020-01-25 20:26:06,862 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:07,815 - Recv:   current_position= X59.00 Y160.00 Z4.69 : set_probe_deployed
2020-01-25 20:26:07,819 - Recv: deploy: 1
2020-01-25 20:26:07,831 - Recv:   current_position= X59.00 Y160.00 Z4.69 : >>> run_z_probe
2020-01-25 20:26:07,835 - Recv:   current_position= X59.00 Y160.00 Z4.69 : >>> do_probe_move
2020-01-25 20:26:07,849 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-0.35
2020-01-25 20:26:07,854 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:08,031 - Recv:  T:19.49 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:26:08,051 - Recv: echo:busy: processing
2020-01-25 20:26:08,349 - Recv:   current_position= X59.00 Y160.00 Z1.90 : sync_plan_position
2020-01-25 20:26:08,352 - Recv:   current_position= X59.00 Y160.00 Z1.90 : <<< do_probe_move
2020-01-25 20:26:08,356 - Recv: 1st Probe Z:1.90
2020-01-25 20:26:08,361 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z4.90
2020-01-25 20:26:08,365 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:08,900 - Recv:   current_position= X59.00 Y160.00 Z4.90 : >>> do_probe_move
2020-01-25 20:26:08,926 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z-0.35
2020-01-25 20:26:08,930 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:09,783 - Recv:   current_position= X59.00 Y160.00 Z1.99 : sync_plan_position
2020-01-25 20:26:09,788 - Recv:   current_position= X59.00 Y160.00 Z1.99 : <<< do_probe_move
2020-01-25 20:26:09,792 - Recv: 2nd Probe Z:1.99 Discrepancy:-0.09
2020-01-25 20:26:09,797 - Recv:   current_position= X59.00 Y160.00 Z1.99 : <<< run_z_probe
2020-01-25 20:26:09,801 - Recv: >>> do_blocking_move_to X59.00 Y160.00 Z4.99
2020-01-25 20:26:09,805 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:10,030 - Recv:  T:19.02 /0.00 B:18.20 /0.00 @:0 B@:0
2020-01-25 20:26:10,050 - Recv: echo:busy: processing
2020-01-25 20:26:10,336 - Recv: <<< probe_at_point
2020-01-25 20:26:10,340 - Recv: >>> probe_at_point(15.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:26:10,345 - Recv:   current_position= X59.00 Y160.00 Z4.99 :
2020-01-25 20:26:10,348 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z4.99
2020-01-25 20:26:10,351 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:11,393 - Recv:   current_position= X59.00 Y295.00 Z4.99 : set_probe_deployed
2020-01-25 20:26:11,404 - Recv: deploy: 1
2020-01-25 20:26:11,409 - Recv:   current_position= X59.00 Y295.00 Z4.99 : >>> run_z_probe
2020-01-25 20:26:11,413 - Recv:   current_position= X59.00 Y295.00 Z4.99 : >>> do_probe_move
2020-01-25 20:26:11,427 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-0.35
2020-01-25 20:26:11,431 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:11,924 - Recv:   current_position= X59.00 Y295.00 Z2.21 : sync_plan_position
2020-01-25 20:26:11,929 - Recv:   current_position= X59.00 Y295.00 Z2.21 : <<< do_probe_move
2020-01-25 20:26:11,933 - Recv: 1st Probe Z:2.21
2020-01-25 20:26:11,937 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z5.21
2020-01-25 20:26:11,940 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:12,030 - Recv:  T:19.61 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:26:12,050 - Recv: echo:busy: processing
2020-01-25 20:26:12,483 - Recv:   current_position= X59.00 Y295.00 Z5.21 : >>> do_probe_move
2020-01-25 20:26:12,511 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z-0.35
2020-01-25 20:26:12,516 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:13,369 - Recv:   current_position= X59.00 Y295.00 Z2.28 : sync_plan_position
2020-01-25 20:26:13,374 - Recv:   current_position= X59.00 Y295.00 Z2.28 : <<< do_probe_move
2020-01-25 20:26:13,378 - Recv: 2nd Probe Z:2.28 Discrepancy:-0.08
2020-01-25 20:26:13,384 - Recv:   current_position= X59.00 Y295.00 Z2.28 : <<< run_z_probe
2020-01-25 20:26:13,387 - Recv: >>> do_blocking_move_to X59.00 Y295.00 Z5.28
2020-01-25 20:26:13,391 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:13,922 - Recv: <<< probe_at_point
2020-01-25 20:26:13,926 - Recv: >>> probe_at_point(135.50, 285.00, raise, 0, probe_relative)
2020-01-25 20:26:13,936 - Recv:   current_position= X59.00 Y295.00 Z5.28 :
2020-01-25 20:26:13,943 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z5.28
2020-01-25 20:26:13,946 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:14,030 - Recv:  T:19.57 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:26:14,050 - Recv: echo:busy: processing
2020-01-25 20:26:14,892 - Recv:   current_position= X179.50 Y295.00 Z5.28 : set_probe_deployed
2020-01-25 20:26:14,896 - Recv: deploy: 1
2020-01-25 20:26:14,901 - Recv:   current_position= X179.50 Y295.00 Z5.28 : >>> run_z_probe
2020-01-25 20:26:14,905 - Recv:   current_position= X179.50 Y295.00 Z5.28 : >>> do_probe_move
2020-01-25 20:26:14,926 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-0.35
2020-01-25 20:26:14,931 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:15,504 - Recv:   current_position= X179.50 Y295.00 Z1.85 : sync_plan_position
2020-01-25 20:26:15,516 - Recv:   current_position= X179.50 Y295.00 Z1.85 : <<< do_probe_move
2020-01-25 20:26:15,521 - Recv: 1st Probe Z:1.85
2020-01-25 20:26:15,525 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z4.85
2020-01-25 20:26:15,529 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:16,030 - Recv:  T:18.52 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:26:16,050 - Recv: echo:busy: processing
2020-01-25 20:26:16,056 - Recv:   current_position= X179.50 Y295.00 Z4.85 : >>> do_probe_move
2020-01-25 20:26:16,092 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z-0.35
2020-01-25 20:26:16,098 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:16,941 - Recv:   current_position= X179.50 Y295.00 Z1.93 : sync_plan_position
2020-01-25 20:26:16,945 - Recv:   current_position= X179.50 Y295.00 Z1.93 : <<< do_probe_move
2020-01-25 20:26:16,951 - Recv: 2nd Probe Z:1.93 Discrepancy:-0.08
2020-01-25 20:26:16,956 - Recv:   current_position= X179.50 Y295.00 Z1.93 : <<< run_z_probe
2020-01-25 20:26:16,959 - Recv: >>> do_blocking_move_to X179.50 Y295.00 Z4.93
2020-01-25 20:26:16,963 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:17,494 - Recv: <<< probe_at_point
2020-01-25 20:26:17,498 - Recv: >>> probe_at_point(256.00, 285.00, raise, 0, probe_relative)
2020-01-25 20:26:17,502 - Recv:   current_position= X179.50 Y295.00 Z4.93 :
2020-01-25 20:26:17,507 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z4.93
2020-01-25 20:26:17,510 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:18,031 - Recv:  T:18.28 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:26:18,057 - Recv: echo:busy: processing
2020-01-25 20:26:18,464 - Recv:   current_position= X300.00 Y295.00 Z4.93 : set_probe_deployed
2020-01-25 20:26:18,468 - Recv: deploy: 1
2020-01-25 20:26:18,473 - Recv:   current_position= X300.00 Y295.00 Z4.93 : >>> run_z_probe
2020-01-25 20:26:18,477 - Recv:   current_position= X300.00 Y295.00 Z4.93 : >>> do_probe_move
2020-01-25 20:26:18,498 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-0.35
2020-01-25 20:26:18,503 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:19,080 - Recv:   current_position= X300.00 Y295.00 Z1.48 : sync_plan_position
2020-01-25 20:26:19,092 - Recv:   current_position= X300.00 Y295.00 Z1.48 : <<< do_probe_move
2020-01-25 20:26:19,098 - Recv: 1st Probe Z:1.48
2020-01-25 20:26:19,102 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z4.48
2020-01-25 20:26:19,106 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:19,632 - Recv:   current_position= X300.00 Y295.00 Z4.48 : >>> do_probe_move
2020-01-25 20:26:19,659 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z-0.35
2020-01-25 20:26:19,663 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:20,029 - Recv:  T:18.71 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:26:20,051 - Recv: echo:busy: processing
2020-01-25 20:26:20,517 - Recv:   current_position= X300.00 Y295.00 Z1.56 : sync_plan_position
2020-01-25 20:26:20,522 - Recv:   current_position= X300.00 Y295.00 Z1.56 : <<< do_probe_move
2020-01-25 20:26:20,526 - Recv: 2nd Probe Z:1.56 Discrepancy:-0.08
2020-01-25 20:26:20,531 - Recv:   current_position= X300.00 Y295.00 Z1.56 : <<< run_z_probe
2020-01-25 20:26:20,535 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z4.56
2020-01-25 20:26:20,539 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:21,070 - Recv: <<< probe_at_point
2020-01-25 20:26:21,074 - Recv:   current_position= X300.00 Y295.00 Z4.56 : set_probe_deployed
2020-01-25 20:26:21,079 - Recv: deploy: 0
2020-01-25 20:26:21,084 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z4.56
2020-01-25 20:26:21,088 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:21,093 - Recv:   current_position= X300.00 Y295.00 Z4.56 : > probing complete
2020-01-25 20:26:21,097 - Recv: Extrapolate [ 1+  1+]
2020-01-25 20:26:21,102 - Recv:  (done)
2020-01-25 20:26:21,106 - Recv: Extrapolate [ 1-  1+]
2020-01-25 20:26:21,115 - Recv:  (done)
2020-01-25 20:26:21,123 - Recv: Extrapolate [ 1+  1-]
2020-01-25 20:26:21,126 - Recv:  (done)
2020-01-25 20:26:21,130 - Recv: Extrapolate [ 1-  1-]
2020-01-25 20:26:21,134 - Recv:  (done)
2020-01-25 20:26:21,138 - Recv: Extrapolate [ 1+  0+]
2020-01-25 20:26:21,142 - Recv:  (done)
2020-01-25 20:26:21,147 - Recv: Extrapolate [ 1-  0+]
2020-01-25 20:26:21,151 - Recv:  (done)
2020-01-25 20:26:21,155 - Recv: Extrapolate [ 1+  2-]
2020-01-25 20:26:21,159 - Recv:  (done)
2020-01-25 20:26:21,163 - Recv: Extrapolate [ 1-  2-]
2020-01-25 20:26:21,167 - Recv:  (done)
2020-01-25 20:26:21,172 - Recv: Extrapolate [ 0+  1+]
2020-01-25 20:26:21,175 - Recv:  (done)
2020-01-25 20:26:21,178 - Recv: Extrapolate [ 2-  1+]
2020-01-25 20:26:21,181 - Recv:  (done)
2020-01-25 20:26:21,184 - Recv: Extrapolate [ 0+  1-]
2020-01-25 20:26:21,187 - Recv:  (done)
2020-01-25 20:26:21,191 - Recv: Extrapolate [ 2-  1-]
2020-01-25 20:26:21,196 - Recv:  (done)
2020-01-25 20:26:21,201 - Recv: Extrapolate [ 0+  0+]
2020-01-25 20:26:21,204 - Recv:  (done)
2020-01-25 20:26:21,208 - Recv: Extrapolate [ 2-  0+]
2020-01-25 20:26:21,213 - Recv:  (done)
2020-01-25 20:26:21,217 - Recv: Extrapolate [ 0+  2-]
2020-01-25 20:26:21,219 - Recv:  (done)
2020-01-25 20:26:21,221 - Recv: Extrapolate [ 2-  2-]
2020-01-25 20:26:21,224 - Recv:  (done)
2020-01-25 20:26:21,226 - Recv: Bilinear Leveling Grid:
2020-01-25 20:26:21,228 - Recv:       0      1      2
2020-01-25 20:26:21,230 - Recv:  0 +0.117 -0.240 -0.625
2020-01-25 20:26:21,232 - Recv:  1 +0.308 +0.010 -0.325
2020-01-25 20:26:21,234 - Recv:  2 +0.604 +0.251 -0.123
2020-01-25 20:26:21,237 - Recv:
2020-01-25 20:26:21,239 - Recv: G29 uncorrected Z:4.56
2020-01-25 20:26:21,241 - Recv:  corrected Z:4.64
2020-01-25 20:26:21,243 - Recv: <<< G29
2020-01-25 20:26:21,245 - Recv:   current_position= X300.00 Y295.00 Z4.64 : sync_plan_position
2020-01-25 20:26:21,247 - Recv: >>> do_blocking_move_to X300.00 Y295.00 Z5.00
2020-01-25 20:26:21,250 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:21,321 - Recv: X:300.00 Y:295.00 Z:5.00 E:0.00 Count X:30000 Y:29500 Z:1968
2020-01-25 20:26:21,327 - Recv: ok
2020-01-25 20:26:22,030 - Recv:  T:19.10 /0.00 B:17.97 /0.00 @:0 B@:0
2020-01-25 20:26:23,518 - Send: M500
2020-01-25 20:26:23,534 - Recv: echo:M500
2020-01-25 20:26:23,700 - Recv: echo:Settings Stored (635 bytes; crc 55590)
2020-01-25 20:26:23,703 - Recv: ok
2020-01-25 20:26:24,032 - Recv:  T:19.06 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:26:26,031 - Recv:  T:18.98 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:26:26,751 - Send: G28
2020-01-25 20:26:26,765 - Recv: echo:G28
2020-01-25 20:26:26,770 - Recv: >>> G28
2020-01-25 20:26:26,777 - Recv: Machine Type: Cartesian
2020-01-25 20:26:26,784 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:26:26,787 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:26:26,792 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:26:26,797 - Recv:  (enabled)
2020-01-25 20:26:26,801 - Recv: ABL Adjustment Z-0.080
2020-01-25 20:26:26,805 - Recv:   current_position= X300.00 Y295.00 Z5.00 : Leveling ON
2020-01-25 20:26:26,809 - Recv:   current_position= X300.00 Y295.00 Z4.88 : ...Now OFF
2020-01-25 20:26:26,813 - Recv:   current_position= X300.00 Y295.00 Z4.88 : sync_plan_position
2020-01-25 20:26:26,817 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 20:26:26,821 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z4.88
2020-01-25 20:26:26,823 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:28,036 - Recv:  T:18.67 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:26:28,756 - Recv: echo:busy: processing
2020-01-25 20:26:30,030 - Recv:  T:19.10 /0.00 B:19.80 /0.00 @:0 B@:0
2020-01-25 20:26:30,757 - Recv: echo:busy: processing
2020-01-25 20:26:32,031 - Recv:  T:19.34 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:26:32,756 - Recv: echo:busy: processing
2020-01-25 20:26:32,836 - Recv: >>> homeaxis(X)
2020-01-25 20:26:32,840 - Recv: Home 1 Fast:
2020-01-25 20:26:32,844 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:26:33,073 - Recv: <<< do_homing_move(X)
2020-01-25 20:26:33,078 - Recv: Move Away:
2020-01-25 20:26:33,083 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:26:33,320 - Recv: <<< do_homing_move(X)
2020-01-25 20:26:33,325 - Recv: Home 2 Slow:
2020-01-25 20:26:33,329 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:26:33,646 - Recv: <<< do_homing_move(X)
2020-01-25 20:26:33,651 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:26:33,655 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:26:33,660 - Recv: > home_offset[X] = 0.00
2020-01-25 20:26:33,664 - Recv:   current_position= X0.00 Y0.00 Z4.88 :
2020-01-25 20:26:33,667 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:26:33,670 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 20:26:33,674 - Recv:   current_position= X0.00 Y0.00 Z4.88 : > AFTER set_axis_is_at_home
2020-01-25 20:26:33,677 - Recv: <<< homeaxis(X)
2020-01-25 20:26:33,681 - Recv: >>> homeaxis(Y)
2020-01-25 20:26:33,685 - Recv: Home 1 Fast:
2020-01-25 20:26:33,689 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:26:33,770 - Recv: <<< do_homing_move(Y)
2020-01-25 20:26:33,774 - Recv: Move Away:
2020-01-25 20:26:33,777 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:26:34,018 - Recv: <<< do_homing_move(Y)
2020-01-25 20:26:34,022 - Recv: Home 2 Slow:
2020-01-25 20:26:34,025 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:26:34,031 - Recv:  T:19.41 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:26:34,340 - Recv: <<< do_homing_move(Y)
2020-01-25 20:26:34,344 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:26:34,349 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:26:34,352 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:26:34,356 - Recv:   current_position= X0.00 Y0.00 Z4.88 :
2020-01-25 20:26:34,360 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:26:34,365 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 20:26:34,369 - Recv:   current_position= X0.00 Y0.00 Z4.88 : > AFTER set_axis_is_at_home
2020-01-25 20:26:34,373 - Recv: <<< homeaxis(Y)
2020-01-25 20:26:34,376 - Recv: home_z_safely >>>
2020-01-25 20:26:34,380 - Recv:   current_position= X0.00 Y0.00 Z4.88 : sync_plan_position
2020-01-25 20:26:34,384 - Recv:   destination= X194.00 Y160.00 Z6.53 : home_z_safely
2020-01-25 20:26:34,386 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.88
2020-01-25 20:26:34,390 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:34,764 - Recv: echo:busy: processing
2020-01-25 20:26:36,033 - Recv:  T:19.92 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:26:36,104 - Recv: >>> homeaxis(Z)
2020-01-25 20:26:36,108 - Recv:   current_position= X194.00 Y160.00 Z4.88 : set_probe_deployed
2020-01-25 20:26:36,113 - Recv: deploy: 1
2020-01-25 20:26:36,116 - Recv: do_probe_raise(5.00)
2020-01-25 20:26:36,119 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:26:36,123 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:36,501 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:26:36,505 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:36,509 - Recv: Home 1 Fast:
2020-01-25 20:26:36,513 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:26:36,764 - Recv: echo:busy: processing
2020-01-25 20:26:37,321 - Recv: <<< do_homing_move(Z)
2020-01-25 20:26:37,326 - Recv: Move Away:
2020-01-25 20:26:37,330 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:26:37,865 - Recv: <<< do_homing_move(Z)
2020-01-25 20:26:37,870 - Recv: Home 2 Slow:
2020-01-25 20:26:37,874 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:26:38,030 - Recv:  T:18.59 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:26:38,749 - Recv: <<< do_homing_move(Z)
2020-01-25 20:26:38,759 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:26:38,763 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:26:38,767 - Recv: > probe_offset.z = -1.65
2020-01-25 20:26:38,772 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:26:38,776 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:26:38,781 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:26:38,784 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:26:38,788 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:26:38,791 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:26:38,796 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:26:38,799 - Recv: deploy: 0
2020-01-25 20:26:38,802 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:26:38,805 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:38,809 - Recv: <<< homeaxis(Z)
2020-01-25 20:26:38,812 - Recv: <<< home_z_safely
2020-01-25 20:26:38,816 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:26:38,820 - Recv: <<< do_blocking_move_to
2020-01-25 20:26:38,822 - Recv: echo:busy: processing
2020-01-25 20:26:39,364 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:26:39,366 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:26:39,369 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:26:39,372 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:26:39,377 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:26:39,380 - Recv: <<< G28
2020-01-25 20:26:39,385 - Recv: ok
2020-01-25 20:26:40,030 - Recv:  T:19.41 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:26:42,032 - Recv:  T:18.09 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:26:44,031 - Recv:  T:18.83 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:26:46,031 - Recv:  T:18.98 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:26:48,030 - Recv:  T:18.95 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:26:50,029 - Recv:  T:19.30 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:26:52,030 - Recv:  T:19.26 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:26:53,361 - Send: G1 Z0
2020-01-25 20:26:53,388 - Recv: echo:G1 Z0
2020-01-25 20:26:53,395 - Recv: ok
2020-01-25 20:26:54,030 - Recv:  T:18.01 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:26:56,030 - Recv:  T:18.95 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:26:58,031 - Recv:  T:18.59 /0.00 B:18.05 /0.00 @:0 B@:0
2020-01-25 20:27:00,030 - Recv:  T:18.63 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:27:02,029 - Recv:  T:19.30 /0.00 B:18.91 /0.00 @:0 B@:0
2020-01-25 20:27:04,029 - Recv:  T:20.04 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:27:06,030 - Recv:  T:19.96 /0.00 B:18.24 /0.00 @:0 B@:0
2020-01-25 20:27:08,029 - Recv:  T:19.41 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:27:10,029 - Recv:  T:19.45 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:27:11,966 - Send: G1 Z5
2020-01-25 20:27:11,981 - Recv: echo:G1 Z5
2020-01-25 20:27:11,993 - Recv: ok
2020-01-25 20:27:12,041 - Recv:  T:18.95 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:27:14,042 - Recv:  T:19.22 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:27:16,042 - Recv:  T:18.59 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:27:18,043 - Recv:  T:19.77 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:27:20,042 - Recv:  T:18.75 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:27:22,042 - Recv:  T:18.16 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:27:24,043 - Recv:  T:18.75 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:27:25,482 - Send: G28
2020-01-25 20:27:25,493 - Recv: echo:G28
2020-01-25 20:27:25,506 - Recv: >>> G28
2020-01-25 20:27:25,512 - Recv: Machine Type: Cartesian
2020-01-25 20:27:25,516 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:27:25,520 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:27:25,524 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:27:25,528 - Recv:  (enabled)
2020-01-25 20:27:25,533 - Recv: ABL Adjustment Z-0.136
2020-01-25 20:27:25,537 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling ON
2020-01-25 20:27:25,541 - Recv:   current_position= X194.00 Y160.00 Z4.86 : ...Now OFF
2020-01-25 20:27:25,546 - Recv:   current_position= X194.00 Y160.00 Z4.86 : sync_plan_position
2020-01-25 20:27:25,549 - Recv:   current_position= X0.00 Y0.00 Z4.86 : sync_plan_position
2020-01-25 20:27:25,553 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z4.86
2020-01-25 20:27:25,556 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:26,042 - Recv:  T:19.10 /0.00 B:17.85 /0.00 @:0 B@:0
2020-01-25 20:27:27,488 - Recv: echo:busy: processing
2020-01-25 20:27:28,042 - Recv:  T:18.71 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:27:28,861 - Recv: >>> homeaxis(X)
2020-01-25 20:27:28,865 - Recv: Home 1 Fast:
2020-01-25 20:27:28,869 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:27:29,487 - Recv: echo:busy: processing
2020-01-25 20:27:29,677 - Recv: <<< do_homing_move(X)
2020-01-25 20:27:29,682 - Recv: Move Away:
2020-01-25 20:27:29,686 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:27:29,925 - Recv: <<< do_homing_move(X)
2020-01-25 20:27:29,929 - Recv: Home 2 Slow:
2020-01-25 20:27:29,933 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:27:30,041 - Recv:  T:18.91 /0.00 B:20.00 /0.00 @:0 B@:0
2020-01-25 20:27:30,247 - Recv: <<< do_homing_move(X)
2020-01-25 20:27:30,251 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:27:30,256 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:27:30,260 - Recv: > home_offset[X] = 0.00
2020-01-25 20:27:30,264 - Recv:   current_position= X0.00 Y0.00 Z4.86 :
2020-01-25 20:27:30,267 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:27:30,271 - Recv:   current_position= X0.00 Y0.00 Z4.86 : sync_plan_position
2020-01-25 20:27:30,274 - Recv:   current_position= X0.00 Y0.00 Z4.86 : > AFTER set_axis_is_at_home
2020-01-25 20:27:30,278 - Recv: <<< homeaxis(X)
2020-01-25 20:27:30,282 - Recv: >>> homeaxis(Y)
2020-01-25 20:27:30,285 - Recv: Home 1 Fast:
2020-01-25 20:27:30,289 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:27:30,372 - Recv: <<< do_homing_move(Y)
2020-01-25 20:27:30,376 - Recv: Move Away:
2020-01-25 20:27:30,380 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:27:30,619 - Recv: <<< do_homing_move(Y)
2020-01-25 20:27:30,624 - Recv: Home 2 Slow:
2020-01-25 20:27:30,628 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:27:30,942 - Recv: <<< do_homing_move(Y)
2020-01-25 20:27:30,946 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:27:30,950 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:27:30,954 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:27:30,958 - Recv:   current_position= X0.00 Y0.00 Z4.86 :
2020-01-25 20:27:30,962 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:27:30,968 - Recv:   current_position= X0.00 Y0.00 Z4.86 : sync_plan_position
2020-01-25 20:27:30,971 - Recv:   current_position= X0.00 Y0.00 Z4.86 : > AFTER set_axis_is_at_home
2020-01-25 20:27:30,975 - Recv: <<< homeaxis(Y)
2020-01-25 20:27:30,979 - Recv: home_z_safely >>>
2020-01-25 20:27:30,982 - Recv:   current_position= X0.00 Y0.00 Z4.86 : sync_plan_position
2020-01-25 20:27:30,986 - Recv:   destination= X194.00 Y160.00 Z6.51 : home_z_safely
2020-01-25 20:27:30,989 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.86
2020-01-25 20:27:30,993 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:31,486 - Recv: echo:busy: processing
2020-01-25 20:27:32,043 - Recv:  T:18.59 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:27:32,706 - Recv: >>> homeaxis(Z)
2020-01-25 20:27:32,717 - Recv:   current_position= X194.00 Y160.00 Z4.86 : set_probe_deployed
2020-01-25 20:27:32,723 - Recv: deploy: 1
2020-01-25 20:27:32,727 - Recv: do_probe_raise(5.00)
2020-01-25 20:27:32,730 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:27:32,734 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:33,104 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:27:33,108 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:33,114 - Recv: Home 1 Fast:
2020-01-25 20:27:33,118 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:27:33,487 - Recv: echo:busy: processing
2020-01-25 20:27:33,920 - Recv: <<< do_homing_move(Z)
2020-01-25 20:27:33,924 - Recv: Move Away:
2020-01-25 20:27:33,928 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:27:34,042 - Recv:  T:18.44 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:27:34,465 - Recv: <<< do_homing_move(Z)
2020-01-25 20:27:34,470 - Recv: Home 2 Slow:
2020-01-25 20:27:34,473 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:27:35,349 - Recv: <<< do_homing_move(Z)
2020-01-25 20:27:35,360 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:27:35,365 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:27:35,369 - Recv: > probe_offset.z = -1.65
2020-01-25 20:27:35,373 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:27:35,377 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:27:35,381 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:27:35,385 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:27:35,389 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:27:35,393 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:27:35,396 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:27:35,400 - Recv: deploy: 0
2020-01-25 20:27:35,404 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:27:35,408 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:35,411 - Recv: <<< homeaxis(Z)
2020-01-25 20:27:35,415 - Recv: <<< home_z_safely
2020-01-25 20:27:35,419 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:27:35,423 - Recv: <<< do_blocking_move_to
2020-01-25 20:27:35,487 - Recv: echo:busy: processing
2020-01-25 20:27:35,965 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:27:35,969 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:27:35,974 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:27:35,977 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:27:35,981 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:27:35,991 - Recv: <<< G28
2020-01-25 20:27:35,996 - Recv: ok
2020-01-25 20:27:36,041 - Recv:  T:18.36 /0.00 B:17.34 /0.00 @:0 B@:0
2020-01-25 20:27:38,042 - Recv:  T:18.32 /0.00 B:19.88 /0.00 @:0 B@:0
2020-01-25 20:27:40,042 - Recv:  T:18.87 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:27:42,041 - Recv:  T:18.98 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:27:44,041 - Recv:  T:17.77 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:27:46,040 - Recv:  T:18.52 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:27:48,042 - Recv:  T:19.65 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:27:50,041 - Recv:  T:18.20 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:27:52,041 - Recv:  T:18.32 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:27:52,378 - Send: NOTE: Z on the LCD shows 5.14mm
2020-01-25 20:27:52,394 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:27:52,399 - Recv: Resend: 2
2020-01-25 20:27:52,406 - Recv: ok
2020-01-25 20:27:54,041 - Recv:  T:18.32 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:27:54,789 - Send: G1 ZO
2020-01-25 20:27:54,806 - Recv: echo:G1 ZO
2020-01-25 20:27:54,810 - Recv: ok
2020-01-25 20:27:56,041 - Recv:  T:19.73 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:27:56,858 - Send: G1 Z0
2020-01-25 20:27:56,881 - Recv: echo:G1 Z0
2020-01-25 20:27:56,900 - Recv: ok
2020-01-25 20:27:58,040 - Recv:  T:18.98 /0.00 B:20.04 /0.00 @:0 B@:0
2020-01-25 20:28:00,044 - Recv:  T:18.98 /0.00 B:19.57 /0.00 @:0 B@:0
2020-01-25 20:28:02,045 - Recv:  T:18.28 /0.00 B:20.04 /0.00 @:0 B@:0
2020-01-25 20:28:04,044 - Recv:  T:18.24 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:28:06,045 - Recv:  T:19.41 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:28:08,044 - Recv:  T:18.63 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:28:10,045 - Recv:  T:19.45 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:28:11,787 - Send: G1 Z10
2020-01-25 20:28:11,809 - Recv: echo:G1 Z10
2020-01-25 20:28:11,820 - Recv: ok
2020-01-25 20:28:12,045 - Recv:  T:17.89 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:28:14,050 - Recv:  T:18.83 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:28:16,044 - Recv:  T:19.02 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:28:18,043 - Recv:  T:19.34 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:28:20,044 - Recv:  T:18.63 /0.00 B:18.32 /0.00 @:0 B@:0
2020-01-25 20:28:22,044 - Recv:  T:19.37 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:28:24,044 - Recv:  T:19.02 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:28:24,157 - Send: G28
2020-01-25 20:28:24,163 - Recv: echo:G28
2020-01-25 20:28:24,169 - Recv: >>> G28
2020-01-25 20:28:24,174 - Recv: Machine Type: Cartesian
2020-01-25 20:28:24,178 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:28:24,185 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:28:24,188 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:28:24,193 - Recv:  (enabled)
2020-01-25 20:28:24,197 - Recv: ABL Adjustment Z-0.136
2020-01-25 20:28:24,201 - Recv:   current_position= X194.00 Y160.00 Z10.00 : Leveling ON
2020-01-25 20:28:24,206 - Recv:   current_position= X194.00 Y160.00 Z9.86 : ...Now OFF
2020-01-25 20:28:24,209 - Recv:   current_position= X194.00 Y160.00 Z9.86 : sync_plan_position
2020-01-25 20:28:24,213 - Recv:   current_position= X0.00 Y0.00 Z9.86 : sync_plan_position
2020-01-25 20:28:24,217 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z9.86
2020-01-25 20:28:24,221 - Recv: <<< do_blocking_move_to
2020-01-25 20:28:26,044 - Recv:  T:19.34 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:28:26,162 - Recv: echo:busy: processing
2020-01-25 20:28:27,536 - Recv: >>> homeaxis(X)
2020-01-25 20:28:27,546 - Recv: Home 1 Fast:
2020-01-25 20:28:27,551 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:28:28,044 - Recv:  T:18.59 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:28:28,163 - Recv: echo:busy: processing
2020-01-25 20:28:28,354 - Recv: <<< do_homing_move(X)
2020-01-25 20:28:28,358 - Recv: Move Away:
2020-01-25 20:28:28,361 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:28:28,602 - Recv: <<< do_homing_move(X)
2020-01-25 20:28:28,606 - Recv: Home 2 Slow:
2020-01-25 20:28:28,609 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:28:28,924 - Recv: <<< do_homing_move(X)
2020-01-25 20:28:28,928 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:28:28,932 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:28:28,936 - Recv: > home_offset[X] = 0.00
2020-01-25 20:28:28,941 - Recv:   current_position= X0.00 Y0.00 Z9.86 :
2020-01-25 20:28:28,944 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:28:28,947 - Recv:   current_position= X0.00 Y0.00 Z9.86 : sync_plan_position
2020-01-25 20:28:28,951 - Recv:   current_position= X0.00 Y0.00 Z9.86 : > AFTER set_axis_is_at_home
2020-01-25 20:28:28,955 - Recv: <<< homeaxis(X)
2020-01-25 20:28:28,959 - Recv: >>> homeaxis(Y)
2020-01-25 20:28:28,963 - Recv: Home 1 Fast:
2020-01-25 20:28:28,968 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:28:29,049 - Recv: <<< do_homing_move(Y)
2020-01-25 20:28:29,053 - Recv: Move Away:
2020-01-25 20:28:29,059 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:28:29,296 - Recv: <<< do_homing_move(Y)
2020-01-25 20:28:29,300 - Recv: Home 2 Slow:
2020-01-25 20:28:29,304 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:28:29,619 - Recv: <<< do_homing_move(Y)
2020-01-25 20:28:29,622 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:28:29,627 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:28:29,631 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:28:29,635 - Recv:   current_position= X0.00 Y0.00 Z9.86 :
2020-01-25 20:28:29,639 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:28:29,644 - Recv:   current_position= X0.00 Y0.00 Z9.86 : sync_plan_position
2020-01-25 20:28:29,647 - Recv:   current_position= X0.00 Y0.00 Z9.86 : > AFTER set_axis_is_at_home
2020-01-25 20:28:29,651 - Recv: <<< homeaxis(Y)
2020-01-25 20:28:29,654 - Recv: home_z_safely >>>
2020-01-25 20:28:29,657 - Recv:   current_position= X0.00 Y0.00 Z9.86 : sync_plan_position
2020-01-25 20:28:29,659 - Recv:   destination= X194.00 Y160.00 Z11.51 : home_z_safely
2020-01-25 20:28:29,662 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z9.86
2020-01-25 20:28:29,667 - Recv: <<< do_blocking_move_to
2020-01-25 20:28:30,044 - Recv:  T:18.95 /0.00 B:19.88 /0.00 @:0 B@:0
2020-01-25 20:28:30,162 - Recv: echo:busy: processing
2020-01-25 20:28:31,385 - Recv: >>> homeaxis(Z)
2020-01-25 20:28:31,395 - Recv:   current_position= X194.00 Y160.00 Z9.86 : set_probe_deployed
2020-01-25 20:28:31,401 - Recv: deploy: 1
2020-01-25 20:28:31,405 - Recv: do_probe_raise(5.00)
2020-01-25 20:28:31,410 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z9.86
2020-01-25 20:28:31,414 - Recv: <<< do_blocking_move_to
2020-01-25 20:28:31,418 - Recv: Home 1 Fast:
2020-01-25 20:28:31,423 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:28:32,043 - Recv:  T:19.22 /0.00 B:19.96 /0.00 @:0 B@:0
2020-01-25 20:28:32,162 - Recv: echo:busy: processing
2020-01-25 20:28:32,608 - Recv: <<< do_homing_move(Z)
2020-01-25 20:28:32,613 - Recv: Move Away:
2020-01-25 20:28:32,617 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:28:33,152 - Recv: <<< do_homing_move(Z)
2020-01-25 20:28:33,157 - Recv: Home 2 Slow:
2020-01-25 20:28:33,161 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:28:34,036 - Recv: <<< do_homing_move(Z)
2020-01-25 20:28:34,043 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:28:34,052 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:28:34,056 - Recv: > probe_offset.z = -1.65
2020-01-25 20:28:34,063 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:28:34,068 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:28:34,072 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:28:34,076 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:28:34,080 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:28:34,083 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:28:34,086 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:28:34,090 - Recv: deploy: 0
2020-01-25 20:28:34,094 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:28:34,097 - Recv: <<< do_blocking_move_to
2020-01-25 20:28:34,101 - Recv: <<< homeaxis(Z)
2020-01-25 20:28:34,104 - Recv: <<< home_z_safely
2020-01-25 20:28:34,108 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:28:34,112 - Recv: <<< do_blocking_move_to
2020-01-25 20:28:34,115 - Recv:  T:18.44 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:28:34,161 - Recv: echo:busy: processing
2020-01-25 20:28:34,650 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:28:34,655 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:28:34,660 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:28:34,664 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:28:34,669 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:28:34,674 - Recv: <<< G28
2020-01-25 20:28:34,679 - Recv: ok
2020-01-25 20:28:36,072 - Recv:  T:19.14 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:28:38,072 - Recv:  T:18.59 /0.00 B:19.88 /0.00 @:0 B@:0
2020-01-25 20:28:40,071 - Recv:  T:19.53 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:28:40,435 - Send: NOTE: Z when sent to G1 Z0 went to 0 on the bed. Not too high or too low
2020-01-25 20:28:40,443 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:28:40,446 - Recv: Resend: 2
2020-01-25 20:28:40,456 - Recv: ok
2020-01-25 20:28:42,072 - Recv:  T:18.95 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:28:44,071 - Recv:  T:18.87 /0.00 B:18.12 /0.00 @:0 B@:0
2020-01-25 20:28:46,071 - Recv:  T:19.57 /0.00 B:19.96 /0.00 @:0 B@:0
2020-01-25 20:28:48,072 - Recv:  T:19.49 /0.00 B:19.69 /0.00 @:0 B@:0
2020-01-25 20:28:50,072 - Recv:  T:19.22 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:28:52,071 - Recv:  T:19.30 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:28:54,080 - Recv:  T:19.26 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:28:56,079 - Recv:  T:18.24 /0.00 B:18.24 /0.00 @:0 B@:0
2020-01-25 20:28:57,041 - Send: NOTE: LCD SHOWS Z at 5.14mm. Moving down 5.14mm
2020-01-25 20:28:57,048 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:28:57,063 - Recv: Resend: 2
2020-01-25 20:28:57,068 - Recv: ok
2020-01-25 20:28:58,078 - Recv:  T:18.40 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:29:00,079 - Recv:  T:18.98 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:29:02,079 - Recv:  T:18.24 /0.00 B:18.09 /0.00 @:0 B@:0
2020-01-25 20:29:03,998 - Send: G91
2020-01-25 20:29:04,016 - Send: G1 Z-5 F1200
2020-01-25 20:29:04,026 - Recv: echo:G91
2020-01-25 20:29:04,039 - Recv: ok
2020-01-25 20:29:04,047 - Send: G90
2020-01-25 20:29:04,056 - Recv: echo:G1 Z-5 F1200
2020-01-25 20:29:04,067 - Recv: ok
2020-01-25 20:29:04,081 - Recv: echo:G90
2020-01-25 20:29:04,088 - Recv: ok
2020-01-25 20:29:04,092 - Recv:  T:19.53 /0.00 B:19.88 /0.00 @:0 B@:0
2020-01-25 20:29:06,084 - Recv:  T:18.24 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:29:06,385 - Send: G91
2020-01-25 20:29:06,391 - Send: G1 Z-0.1 F1200
2020-01-25 20:29:06,396 - Recv: echo:G91
2020-01-25 20:29:06,403 - Send: G90
2020-01-25 20:29:06,418 - Recv: ok
2020-01-25 20:29:06,428 - Recv: echo:G1 Z-0.1 F1200
2020-01-25 20:29:06,434 - Recv: ok
2020-01-25 20:29:06,439 - Recv: echo:G90
2020-01-25 20:29:06,443 - Recv: ok
2020-01-25 20:29:07,651 - Send: G91
2020-01-25 20:29:07,662 - Send: G1 Z-0.01 F1200
2020-01-25 20:29:07,667 - Recv: echo:G91
2020-01-25 20:29:07,673 - Send: G90
2020-01-25 20:29:07,683 - Recv: ok
2020-01-25 20:29:07,693 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:29:07,698 - Recv: ok
2020-01-25 20:29:07,705 - Recv: echo:G90
2020-01-25 20:29:07,708 - Recv: ok
2020-01-25 20:29:08,006 - Send: G91
2020-01-25 20:29:08,010 - Send: G1 Z-0.01 F1200
2020-01-25 20:29:08,011 - Recv: echo:G91
2020-01-25 20:29:08,014 - Recv: ok
2020-01-25 20:29:08,015 - Send: G90
2020-01-25 20:29:08,019 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:29:08,022 - Recv: ok
2020-01-25 20:29:08,024 - Recv: echo:G90
2020-01-25 20:29:08,027 - Recv: ok
2020-01-25 20:29:08,078 - Recv:  T:19.34 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:29:08,349 - Send: G91
2020-01-25 20:29:08,353 - Send: G1 Z-0.01 F1200
2020-01-25 20:29:08,356 - Recv: echo:G91
2020-01-25 20:29:08,357 - Send: G90
2020-01-25 20:29:08,360 - Recv: ok
2020-01-25 20:29:08,362 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:29:08,365 - Recv: ok
2020-01-25 20:29:08,367 - Recv: echo:G90
2020-01-25 20:29:08,369 - Recv: ok
2020-01-25 20:29:08,714 - Send: G91
2020-01-25 20:29:08,725 - Recv: echo:G91
2020-01-25 20:29:08,727 - Send: G1 Z-0.01 F1200
2020-01-25 20:29:08,737 - Send: G90
2020-01-25 20:29:08,741 - Recv: ok
2020-01-25 20:29:08,745 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:29:08,749 - Recv: ok
2020-01-25 20:29:08,754 - Recv: echo:G90
2020-01-25 20:29:08,758 - Recv: ok
2020-01-25 20:29:10,080 - Recv:  T:18.28 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:29:12,078 - Recv:  T:18.16 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:29:14,079 - Recv:  T:18.91 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:29:16,079 - Recv:  T:19.45 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:29:18,078 - Recv:  T:19.18 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:29:20,079 - Recv:  T:19.53 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:29:22,077 - Recv:  T:18.91 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:29:24,079 - Recv:  T:19.18 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:29:26,078 - Recv:  T:19.06 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:29:28,078 - Recv:  T:18.52 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:29:30,079 - Recv:  T:18.63 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:29:32,078 - Recv:  T:19.49 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:29:34,077 - Recv:  T:18.52 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:29:36,077 - Recv:  T:18.63 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:29:38,078 - Recv:  T:18.79 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:29:40,078 - Recv:  T:18.16 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:29:42,078 - Recv:  T:17.89 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:29:44,077 - Recv:  T:19.53 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:29:46,078 - Recv:  T:18.28 /0.00 B:19.73 /0.00 @:0 B@:0
2020-01-25 20:29:48,078 - Recv:  T:18.91 /0.00 B:18.59 /0.00 @:0 B@:0
2020-01-25 20:29:49,157 - Send: NOTE: Nozzle is low on the bed when telling to move down 5.14mm
2020-01-25 20:29:49,165 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:29:49,170 - Recv: Resend: 2
2020-01-25 20:29:49,176 - Recv: ok
2020-01-25 20:29:50,077 - Recv:  T:19.41 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:29:52,077 - Recv:  T:18.95 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:29:54,077 - Recv:  T:19.02 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:29:56,078 - Recv:  T:18.63 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:29:58,077 - Recv:  T:18.44 /0.00 B:17.97 /0.00 @:0 B@:0
2020-01-25 20:30:00,078 - Recv:  T:18.55 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:30:02,077 - Recv:  T:18.55 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:30:03,124 - Send: G28
2020-01-25 20:30:03,137 - Recv: echo:G28
2020-01-25 20:30:03,149 - Recv: >>> G28
2020-01-25 20:30:03,154 - Recv: Machine Type: Cartesian
2020-01-25 20:30:03,159 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:30:03,163 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:30:03,167 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:30:03,171 - Recv:  (enabled)
2020-01-25 20:30:03,173 - Recv: ABL Adjustment Z-0.136
2020-01-25 20:30:03,176 - Recv:   current_position= X194.00 Y160.00 Z-0.00 : Leveling ON
2020-01-25 20:30:03,178 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : ...Now OFF
2020-01-25 20:30:03,181 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : sync_plan_position
2020-01-25 20:30:03,183 - Recv: Raise Z (before homing) to 3.00
2020-01-25 20:30:03,186 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z3.00
2020-01-25 20:30:03,188 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:03,710 - Recv:   current_position= X0.00 Y0.00 Z3.00 : sync_plan_position
2020-01-25 20:30:03,714 - Recv: >>> do_blocking_move_to X-450.00 Y-450.00 Z3.00
2020-01-25 20:30:03,716 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:04,077 - Recv:  T:19.49 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:30:05,130 - Recv: echo:busy: processing
2020-01-25 20:30:06,077 - Recv:  T:18.09 /0.00 B:19.57 /0.00 @:0 B@:0
2020-01-25 20:30:07,065 - Recv: >>> homeaxis(X)
2020-01-25 20:30:07,070 - Recv: Home 1 Fast:
2020-01-25 20:30:07,074 - Recv: >>> do_homing_move(X, -450.00, [50.00])
2020-01-25 20:30:07,129 - Recv: echo:busy: processing
2020-01-25 20:30:07,883 - Recv: <<< do_homing_move(X)
2020-01-25 20:30:07,888 - Recv: Move Away:
2020-01-25 20:30:07,892 - Recv: >>> do_homing_move(X, 5.00, [50.00])
2020-01-25 20:30:08,077 - Recv:  T:19.18 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:30:08,130 - Recv: <<< do_homing_move(X)
2020-01-25 20:30:08,135 - Recv: Home 2 Slow:
2020-01-25 20:30:08,140 - Recv: >>> do_homing_move(X, -10.00, 25.00)
2020-01-25 20:30:08,452 - Recv: <<< do_homing_move(X)
2020-01-25 20:30:08,457 - Recv: >>> set_axis_is_at_home(X)
2020-01-25 20:30:08,461 - Recv: Axis X home_offset = 0.00 position_shift = 0.00
2020-01-25 20:30:08,466 - Recv: > home_offset[X] = 0.00
2020-01-25 20:30:08,470 - Recv:   current_position= X0.00 Y0.00 Z3.00 :
2020-01-25 20:30:08,474 - Recv: <<< set_axis_is_at_home(X)
2020-01-25 20:30:08,479 - Recv:   current_position= X0.00 Y0.00 Z3.00 : sync_plan_position
2020-01-25 20:30:08,483 - Recv:   current_position= X0.00 Y0.00 Z3.00 : > AFTER set_axis_is_at_home
2020-01-25 20:30:08,487 - Recv: <<< homeaxis(X)
2020-01-25 20:30:08,491 - Recv: >>> homeaxis(Y)
2020-01-25 20:30:08,495 - Recv: Home 1 Fast:
2020-01-25 20:30:08,499 - Recv: >>> do_homing_move(Y, -450.00, [50.00])
2020-01-25 20:30:08,575 - Recv: <<< do_homing_move(Y)
2020-01-25 20:30:08,578 - Recv: Move Away:
2020-01-25 20:30:08,580 - Recv: >>> do_homing_move(Y, 5.00, [50.00])
2020-01-25 20:30:08,823 - Recv: <<< do_homing_move(Y)
2020-01-25 20:30:08,826 - Recv: Home 2 Slow:
2020-01-25 20:30:08,828 - Recv: >>> do_homing_move(Y, -10.00, 25.00)
2020-01-25 20:30:09,130 - Recv: echo:busy: processing
2020-01-25 20:30:09,145 - Recv: <<< do_homing_move(Y)
2020-01-25 20:30:09,147 - Recv: >>> set_axis_is_at_home(Y)
2020-01-25 20:30:09,150 - Recv: Axis Y home_offset = 0.00 position_shift = 0.00
2020-01-25 20:30:09,152 - Recv: > home_offset[Y] = 0.00
2020-01-25 20:30:09,155 - Recv:   current_position= X0.00 Y0.00 Z3.00 :
2020-01-25 20:30:09,157 - Recv: <<< set_axis_is_at_home(Y)
2020-01-25 20:30:09,160 - Recv:   current_position= X0.00 Y0.00 Z3.00 : sync_plan_position
2020-01-25 20:30:09,162 - Recv:   current_position= X0.00 Y0.00 Z3.00 : > AFTER set_axis_is_at_home
2020-01-25 20:30:09,165 - Recv: <<< homeaxis(Y)
2020-01-25 20:30:09,167 - Recv: home_z_safely >>>
2020-01-25 20:30:09,169 - Recv:   current_position= X0.00 Y0.00 Z3.00 : sync_plan_position
2020-01-25 20:30:09,171 - Recv:   destination= X194.00 Y160.00 Z4.65 : home_z_safely
2020-01-25 20:30:09,174 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z3.00
2020-01-25 20:30:09,176 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:10,090 - Recv:  T:18.95 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:30:10,909 - Recv: >>> homeaxis(Z)
2020-01-25 20:30:10,921 - Recv:   current_position= X194.00 Y160.00 Z3.00 : set_probe_deployed
2020-01-25 20:30:10,925 - Recv: deploy: 1
2020-01-25 20:30:10,928 - Recv: do_probe_raise(5.00)
2020-01-25 20:30:10,933 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:30:10,937 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:11,130 - Recv: echo:busy: processing
2020-01-25 20:30:11,540 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:30:11,544 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:11,548 - Recv: Home 1 Fast:
2020-01-25 20:30:11,551 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:30:12,090 - Recv:  T:19.65 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:30:12,356 - Recv: <<< do_homing_move(Z)
2020-01-25 20:30:12,361 - Recv: Move Away:
2020-01-25 20:30:12,365 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:30:12,902 - Recv: <<< do_homing_move(Z)
2020-01-25 20:30:12,907 - Recv: Home 2 Slow:
2020-01-25 20:30:12,911 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:30:13,129 - Recv: echo:busy: processing
2020-01-25 20:30:13,785 - Recv: <<< do_homing_move(Z)
2020-01-25 20:30:13,790 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:30:13,794 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:30:13,799 - Recv: > probe_offset.z = -1.65
2020-01-25 20:30:13,803 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:30:13,808 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:30:13,813 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:30:13,817 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:30:13,821 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:30:13,826 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:30:13,829 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:30:13,833 - Recv: deploy: 0
2020-01-25 20:30:13,836 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:30:13,840 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:13,843 - Recv: <<< homeaxis(Z)
2020-01-25 20:30:13,846 - Recv: <<< home_z_safely
2020-01-25 20:30:13,849 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:30:13,852 - Recv: <<< do_blocking_move_to
2020-01-25 20:30:14,089 - Recv:  T:18.55 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:30:14,399 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:30:14,402 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:30:14,405 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:30:14,408 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:30:14,412 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:30:14,418 - Recv: <<< G28
2020-01-25 20:30:14,420 - Recv: ok
2020-01-25 20:30:16,097 - Recv:  T:18.32 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:30:18,095 - Recv:  T:18.12 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:30:20,090 - Recv:  T:18.98 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:30:22,089 - Recv:  T:18.40 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:30:24,090 - Recv:  T:18.95 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:30:26,089 - Recv:  T:18.20 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:30:28,089 - Recv:  T:18.91 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:30:30,088 - Recv:  T:18.52 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:30:32,090 - Recv:  T:18.59 /0.00 B:18.36 /0.00 @:0 B@:0
2020-01-25 20:30:34,089 - Recv:  T:18.01 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:30:36,089 - Recv:  T:19.30 /0.00 B:19.34 /0.00 @:0 B@:0
2020-01-25 20:30:38,089 - Recv:  T:18.59 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:30:40,098 - Recv:  T:19.80 /0.00 B:18.59 /0.00 @:0 B@:0
2020-01-25 20:30:42,095 - Recv:  T:18.59 /0.00 B:18.36 /0.00 @:0 B@:0
2020-01-25 20:30:44,090 - Recv:  T:18.44 /0.00 B:18.91 /0.00 @:0 B@:0
2020-01-25 20:30:46,091 - Recv:  T:19.22 /0.00 B:18.91 /0.00 @:0 B@:0
2020-01-25 20:30:48,091 - Recv:  T:18.63 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:30:50,092 - Recv:  T:19.69 /0.00 B:18.59 /0.00 @:0 B@:0
2020-01-25 20:30:52,092 - Recv:  T:18.40 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:30:54,092 - Recv:  T:19.37 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:30:56,091 - Recv:  T:18.87 /0.00 B:18.87 /0.00 @:0 B@:0
2020-01-25 20:30:56,978 - Send: NOTE: LCD SHOWS 5.14MM ON Z
2020-01-25 20:30:56,992 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:30:56,999 - Recv: Resend: 2
2020-01-25 20:30:57,009 - Recv: ok
2020-01-25 20:30:58,092 - Recv:  T:18.95 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:31:00,091 - Recv:  T:19.02 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:31:02,091 - Recv:  T:18.28 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:31:04,090 - Recv:  T:18.48 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:31:06,092 - Recv:  T:19.26 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:31:08,091 - Recv:  T:17.81 /0.00 B:19.92 /0.00 @:0 B@:0
2020-01-25 20:31:09,580 - Send: NOTEL DIAL INDICATOR SHOWING 0MM
2020-01-25 20:31:09,588 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:31:09,595 - Recv: Resend: 2
2020-01-25 20:31:09,609 - Recv: ok
2020-01-25 20:31:10,091 - Recv:  T:17.62 /0.00 B:18.59 /0.00 @:0 B@:0
2020-01-25 20:31:12,091 - Recv:  T:19.53 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:31:14,091 - Recv:  T:19.77 /0.00 B:20.00 /0.00 @:0 B@:0
2020-01-25 20:31:14,991 - Send: G1 Z0
2020-01-25 20:31:15,014 - Recv: echo:G1 Z0
2020-01-25 20:31:15,018 - Recv: ok
2020-01-25 20:31:16,091 - Recv:  T:17.62 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:31:18,090 - Recv:  T:18.52 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:31:20,091 - Recv:  T:18.91 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:31:22,091 - Recv:  T:19.02 /0.00 B:18.71 /0.00 @:0 B@:0
2020-01-25 20:31:24,091 - Recv:  T:18.01 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:31:26,090 - Recv:  T:18.48 /0.00 B:20.23 /0.00 @:0 B@:0
2020-01-25 20:31:28,090 - Recv:  T:19.30 /0.00 B:19.61 /0.00 @:0 B@:0
2020-01-25 20:31:30,097 - Recv:  T:19.26 /0.00 B:18.28 /0.00 @:0 B@:0
2020-01-25 20:31:32,096 - Recv:  T:18.95 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:31:34,096 - Recv:  T:18.36 /0.00 B:19.65 /0.00 @:0 B@:0
2020-01-25 20:31:36,095 - Recv:  T:18.36 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:31:38,096 - Recv:  T:18.98 /0.00 B:18.16 /0.00 @:0 B@:0
2020-01-25 20:31:40,096 - Recv:  T:18.20 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:31:42,097 - Recv:  T:19.06 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:31:44,095 - Recv:  T:19.34 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:31:44,908 - Send: NOTE: G1 Z0 shows 4.98mm MOVED ON DIAL INDICATOR
2020-01-25 20:31:44,918 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:31:44,924 - Recv: Resend: 2
2020-01-25 20:31:44,938 - Recv: ok
2020-01-25 20:31:46,096 - Recv:  T:19.84 /0.00 B:18.59 /0.00 @:0 B@:0
2020-01-25 20:31:47,703 - Send: G1 Z5
2020-01-25 20:31:47,735 - Recv: echo:G1 Z5
2020-01-25 20:31:47,740 - Recv: ok
2020-01-25 20:31:48,096 - Recv:  T:19.61 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:31:50,096 - Recv:  T:18.98 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:31:50,273 - Send: G28 Z
2020-01-25 20:31:50,291 - Recv: echo:G28 Z
2020-01-25 20:31:50,296 - Recv: >>> G28
2020-01-25 20:31:50,300 - Recv: Machine Type: Cartesian
2020-01-25 20:31:50,307 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:31:50,312 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:31:50,317 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:31:50,321 - Recv:  (enabled)
2020-01-25 20:31:50,329 - Recv: ABL Adjustment Z-0.136
2020-01-25 20:31:50,333 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling ON
2020-01-25 20:31:50,337 - Recv:   current_position= X194.00 Y160.00 Z4.86 : ...Now OFF
2020-01-25 20:31:50,341 - Recv:   current_position= X194.00 Y160.00 Z4.86 : sync_plan_position
2020-01-25 20:31:50,347 - Recv: home_z_safely >>>
2020-01-25 20:31:50,350 - Recv:   current_position= X194.00 Y160.00 Z4.86 : sync_plan_position
2020-01-25 20:31:50,355 - Recv:   destination= X194.00 Y160.00 Z6.51 : home_z_safely
2020-01-25 20:31:50,359 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z4.86
2020-01-25 20:31:50,363 - Recv: <<< do_blocking_move_to
2020-01-25 20:31:50,367 - Recv: >>> homeaxis(Z)
2020-01-25 20:31:50,371 - Recv:   current_position= X194.00 Y160.00 Z4.86 : set_probe_deployed
2020-01-25 20:31:50,376 - Recv: deploy: 1
2020-01-25 20:31:50,380 - Recv: do_probe_raise(5.00)
2020-01-25 20:31:50,384 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:31:50,388 - Recv: <<< do_blocking_move_to
2020-01-25 20:31:50,702 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:31:50,705 - Recv: <<< do_blocking_move_to
2020-01-25 20:31:50,707 - Recv: Home 1 Fast:
2020-01-25 20:31:50,709 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:31:51,517 - Recv: <<< do_homing_move(Z)
2020-01-25 20:31:51,521 - Recv: Move Away:
2020-01-25 20:31:51,526 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:31:52,062 - Recv: <<< do_homing_move(Z)
2020-01-25 20:31:52,067 - Recv: Home 2 Slow:
2020-01-25 20:31:52,071 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:31:52,098 - Recv:  T:19.06 /0.00 B:19.65 /0.00 @:0 B@:0
2020-01-25 20:31:52,278 - Recv: echo:busy: processing
2020-01-25 20:31:52,946 - Recv: <<< do_homing_move(Z)
2020-01-25 20:31:52,950 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:31:52,955 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:31:52,960 - Recv: > probe_offset.z = -1.65
2020-01-25 20:31:52,965 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:31:52,970 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:31:52,975 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:31:52,979 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:31:52,983 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:31:52,987 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:31:52,992 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:31:52,995 - Recv: deploy: 0
2020-01-25 20:31:53,000 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:31:53,004 - Recv: <<< do_blocking_move_to
2020-01-25 20:31:53,005 - Recv: <<< homeaxis(Z)
2020-01-25 20:31:53,007 - Recv: <<< home_z_safely
2020-01-25 20:31:53,010 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:31:53,012 - Recv: <<< do_blocking_move_to
2020-01-25 20:31:53,560 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:31:53,563 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:31:53,566 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:31:53,569 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:31:53,574 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:31:53,577 - Recv: <<< G28
2020-01-25 20:31:53,580 - Recv: ok
2020-01-25 20:31:54,096 - Recv:  T:19.61 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:31:56,097 - Recv:  T:18.79 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:31:58,096 - Recv:  T:18.20 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:32:00,097 - Recv:  T:18.95 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:32:02,103 - Recv:  T:19.26 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:32:04,102 - Recv:  T:19.14 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:32:06,103 - Recv:  T:19.69 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:32:08,102 - Recv:  T:18.59 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:32:10,102 - Recv:  T:18.52 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:32:12,102 - Recv:  T:18.95 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:32:12,528 - Send: NOTE: DIAL INDICATOR SHOWS 0 AFTER G28 Z, LCD SHOWS 5.14MM
2020-01-25 20:32:12,545 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:32:12,550 - Recv: Resend: 2
2020-01-25 20:32:12,558 - Recv: ok
2020-01-25 20:32:14,103 - Recv:  T:18.83 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:32:16,102 - Recv:  T:18.48 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:32:18,102 - Recv:  T:18.75 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:32:19,725 - Send: NOTE: MOVING DOWN 5.14MM
2020-01-25 20:32:19,746 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:32:19,751 - Recv: Resend: 2
2020-01-25 20:32:19,762 - Recv: ok
2020-01-25 20:32:20,102 - Recv:  T:19.45 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:32:22,108 - Recv:  T:18.32 /0.00 B:18.09 /0.00 @:0 B@:0
2020-01-25 20:32:24,101 - Recv:  T:19.49 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:32:24,776 - Send: G91
2020-01-25 20:32:24,784 - Send: G1 Z-1 F1200
2020-01-25 20:32:24,787 - Recv: echo:G91
2020-01-25 20:32:24,794 - Send: G90
2020-01-25 20:32:24,861 - Recv: ok
2020-01-25 20:32:24,879 - Recv: echo:G1 Z-1 F1200
2020-01-25 20:32:24,886 - Recv: ok
2020-01-25 20:32:24,891 - Recv: echo:G90
2020-01-25 20:32:24,897 - Recv: ok
2020-01-25 20:32:25,269 - Send: G91
2020-01-25 20:32:25,272 - Send: G1 Z-1 F1200
2020-01-25 20:32:25,277 - Send: G90
2020-01-25 20:32:25,283 - Recv: echo:G91
2020-01-25 20:32:25,289 - Recv: ok
2020-01-25 20:32:25,293 - Recv: echo:G1 Z-1 F1200
2020-01-25 20:32:25,297 - Recv: ok
2020-01-25 20:32:25,301 - Recv: echo:G90
2020-01-25 20:32:25,305 - Recv: ok
2020-01-25 20:32:25,746 - Send: G91
2020-01-25 20:32:25,756 - Send: G1 Z-1 F1200
2020-01-25 20:32:25,759 - Send: G90
2020-01-25 20:32:25,760 - Recv: echo:G91
2020-01-25 20:32:25,771 - Recv: ok
2020-01-25 20:32:25,777 - Recv: echo:G1 Z-1 F1200
2020-01-25 20:32:25,781 - Recv: ok
2020-01-25 20:32:25,786 - Recv: echo:G90
2020-01-25 20:32:25,790 - Recv: ok
2020-01-25 20:32:26,112 - Recv:  T:18.63 /0.00 B:18.36 /0.00 @:0 B@:0
2020-01-25 20:32:26,159 - Send: G91
2020-01-25 20:32:26,164 - Send: G1 Z-1 F1200
2020-01-25 20:32:26,166 - Recv: echo:G91
2020-01-25 20:32:26,168 - Send: G90
2020-01-25 20:32:26,181 - Recv: ok
2020-01-25 20:32:26,193 - Recv: echo:G1 Z-1 F1200
2020-01-25 20:32:26,202 - Recv: ok
2020-01-25 20:32:26,207 - Recv: echo:G90
2020-01-25 20:32:26,211 - Recv: ok
2020-01-25 20:32:26,606 - Send: G91
2020-01-25 20:32:26,615 - Send: G1 Z-1 F1200
2020-01-25 20:32:26,622 - Recv: echo:G91
2020-01-25 20:32:26,624 - Send: G90
2020-01-25 20:32:26,631 - Recv: ok
2020-01-25 20:32:26,637 - Recv: echo:G1 Z-1 F1200
2020-01-25 20:32:26,640 - Recv: ok
2020-01-25 20:32:26,644 - Recv: echo:G90
2020-01-25 20:32:26,648 - Recv: ok
2020-01-25 20:32:27,750 - Send: G91
2020-01-25 20:32:27,762 - Recv: echo:G91
2020-01-25 20:32:27,772 - Send: G1 Z-0.1 F1200
2020-01-25 20:32:27,776 - Recv: ok
2020-01-25 20:32:27,786 - Send: G90
2020-01-25 20:32:27,793 - Recv: echo:G1 Z-0.1 F1200
2020-01-25 20:32:27,801 - Recv: ok
2020-01-25 20:32:27,804 - Recv: echo:G90
2020-01-25 20:32:27,807 - Recv: ok
2020-01-25 20:32:28,111 - Recv:  T:19.06 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:32:29,119 - Send: G91
2020-01-25 20:32:29,134 - Send: G1 Z-0.01 F1200
2020-01-25 20:32:29,149 - Recv: echo:G91
2020-01-25 20:32:29,151 - Send: G90
2020-01-25 20:32:29,158 - Recv: ok
2020-01-25 20:32:29,164 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:32:29,168 - Recv: ok
2020-01-25 20:32:29,172 - Recv: echo:G90
2020-01-25 20:32:29,176 - Recv: ok
2020-01-25 20:32:29,564 - Send: G91
2020-01-25 20:32:29,571 - Send: G1 Z-0.01 F1200
2020-01-25 20:32:29,572 - Recv: echo:G91
2020-01-25 20:32:29,577 - Recv: ok
2020-01-25 20:32:29,592 - Send: G90
2020-01-25 20:32:29,596 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:32:29,601 - Recv: ok
2020-01-25 20:32:29,605 - Recv: echo:G90
2020-01-25 20:32:29,609 - Recv: ok
2020-01-25 20:32:30,008 - Send: G91
2020-01-25 20:32:30,029 - Recv: echo:G91
2020-01-25 20:32:30,031 - Send: G1 Z-0.01 F1200
2020-01-25 20:32:30,035 - Recv: ok
2020-01-25 20:32:30,039 - Send: G90
2020-01-25 20:32:30,044 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:32:30,048 - Recv: ok
2020-01-25 20:32:30,055 - Recv: echo:G90
2020-01-25 20:32:30,059 - Recv: ok
2020-01-25 20:32:30,110 - Recv:  T:18.44 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:32:30,461 - Send: G91
2020-01-25 20:32:30,480 - Send: G1 Z-0.01 F1200
2020-01-25 20:32:30,483 - Recv: echo:G91
2020-01-25 20:32:30,489 - Recv: ok
2020-01-25 20:32:30,493 - Send: G90
2020-01-25 20:32:30,498 - Recv: echo:G1 Z-0.01 F1200
2020-01-25 20:32:30,503 - Recv: ok
2020-01-25 20:32:30,508 - Recv: echo:G90
2020-01-25 20:32:30,511 - Recv: ok
2020-01-25 20:32:32,110 - Recv:  T:17.15 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:32:34,111 - Recv:  T:18.95 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:32:36,110 - Recv:  T:18.55 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:32:38,111 - Recv:  T:18.09 /0.00 B:19.57 /0.00 @:0 B@:0
2020-01-25 20:32:40,110 - Recv:  T:18.40 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:32:42,110 - Recv:  T:19.06 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:32:44,110 - Recv:  T:19.65 /0.00 B:17.77 /0.00 @:0 B@:0
2020-01-25 20:32:46,109 - Recv:  T:18.67 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:32:48,110 - Recv:  T:18.28 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:32:50,110 - Recv:  T:19.22 /0.00 B:18.52 /0.00 @:0 B@:0
2020-01-25 20:32:52,117 - Recv:  T:19.41 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:32:54,116 - Recv:  T:18.83 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:32:56,115 - Recv:  T:19.57 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:32:58,115 - Recv:  T:19.34 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:33:00,114 - Recv:  T:19.84 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:33:02,114 - Recv:  T:19.22 /0.00 B:19.92 /0.00 @:0 B@:0
2020-01-25 20:33:04,115 - Recv:  T:18.59 /0.00 B:19.69 /0.00 @:0 B@:0
2020-01-25 20:33:06,114 - Recv:  T:19.18 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:33:08,115 - Recv:  T:18.63 /0.00 B:19.02 /0.00 @:0 B@:0
2020-01-25 20:33:10,114 - Recv:  T:18.48 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:33:11,994 - Send: NOTE: DIAL INDICATOR SHOWS 5.04MM AND NOZZLE IS TOO CLOSE TO BED
2020-01-25 20:33:12,008 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:33:12,013 - Recv: Resend: 2
2020-01-25 20:33:12,025 - Recv: ok
2020-01-25 20:33:12,114 - Recv:  T:18.98 /0.00 B:18.63 /0.00 @:0 B@:0
2020-01-25 20:33:14,114 - Recv:  T:18.75 /0.00 B:19.92 /0.00 @:0 B@:0
2020-01-25 20:33:14,702 - Send: G28 Z
2020-01-25 20:33:14,714 - Recv: echo:G28 Z
2020-01-25 20:33:14,721 - Recv: >>> G28
2020-01-25 20:33:14,727 - Recv: Machine Type: Cartesian
2020-01-25 20:33:14,732 - Recv: Probe: FIX_MOUNTED_PROBE
2020-01-25 20:33:14,737 - Recv: Probe Offset X-44.00 Y-10.00 Z-1.65 (Left-Front & Below Nozzle)
2020-01-25 20:33:14,741 - Recv: Auto Bed Leveling: BILINEAR
2020-01-25 20:33:14,745 - Recv:  (enabled)
2020-01-25 20:33:14,749 - Recv: ABL Adjustment Z-0.136
2020-01-25 20:33:14,754 - Recv:   current_position= X194.00 Y160.00 Z-0.00 : Leveling ON
2020-01-25 20:33:14,757 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : ...Now OFF
2020-01-25 20:33:14,761 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : sync_plan_position
2020-01-25 20:33:14,765 - Recv: home_z_safely >>>
2020-01-25 20:33:14,769 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : sync_plan_position
2020-01-25 20:33:14,772 - Recv:   destination= X194.00 Y160.00 Z1.51 : home_z_safely
2020-01-25 20:33:14,776 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z-0.14
2020-01-25 20:33:14,780 - Recv: <<< do_blocking_move_to
2020-01-25 20:33:14,784 - Recv: >>> homeaxis(Z)
2020-01-25 20:33:14,788 - Recv:   current_position= X194.00 Y160.00 Z-0.14 : set_probe_deployed
2020-01-25 20:33:14,793 - Recv: deploy: 1
2020-01-25 20:33:14,797 - Recv: do_probe_raise(5.00)
2020-01-25 20:33:14,801 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:33:14,806 - Recv: <<< do_blocking_move_to
2020-01-25 20:33:15,758 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z6.65
2020-01-25 20:33:15,767 - Recv: <<< do_blocking_move_to
2020-01-25 20:33:15,774 - Recv: Home 1 Fast:
2020-01-25 20:33:15,777 - Recv: >>> do_homing_move(Z, -450.00, [8.00])
2020-01-25 20:33:16,115 - Recv:  T:19.18 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:33:16,575 - Recv: <<< do_homing_move(Z)
2020-01-25 20:33:16,579 - Recv: Move Away:
2020-01-25 20:33:16,584 - Recv: >>> do_homing_move(Z, 3.00, 8.00)
2020-01-25 20:33:16,706 - Recv: echo:busy: processing
2020-01-25 20:33:17,119 - Recv: <<< do_homing_move(Z)
2020-01-25 20:33:17,124 - Recv: Home 2 Slow:
2020-01-25 20:33:17,127 - Recv: >>> do_homing_move(Z, -6.00, 4.00)
2020-01-25 20:33:18,002 - Recv: <<< do_homing_move(Z)
2020-01-25 20:33:18,013 - Recv: >>> set_axis_is_at_home(Z)
2020-01-25 20:33:18,018 - Recv: *** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
2020-01-25 20:33:18,023 - Recv: > probe_offset.z = -1.65
2020-01-25 20:33:18,028 - Recv: Axis Z home_offset = 0.00 position_shift = 0.00
2020-01-25 20:33:18,033 - Recv: > home_offset[Z] = 0.00
2020-01-25 20:33:18,037 - Recv:   current_position= X194.00 Y160.00 Z1.65 :
2020-01-25 20:33:18,041 - Recv: <<< set_axis_is_at_home(Z)
2020-01-25 20:33:18,044 - Recv:   current_position= X194.00 Y160.00 Z1.65 : sync_plan_position
2020-01-25 20:33:18,048 - Recv:   current_position= X194.00 Y160.00 Z1.65 : > AFTER set_axis_is_at_home
2020-01-25 20:33:18,052 - Recv:   current_position= X194.00 Y160.00 Z1.65 : set_probe_deployed
2020-01-25 20:33:18,057 - Recv: deploy: 0
2020-01-25 20:33:18,062 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z1.65
2020-01-25 20:33:18,066 - Recv: <<< do_blocking_move_to
2020-01-25 20:33:18,069 - Recv: <<< homeaxis(Z)
2020-01-25 20:33:18,073 - Recv: <<< home_z_safely
2020-01-25 20:33:18,077 - Recv: >>> do_blocking_move_to X194.00 Y160.00 Z5.00
2020-01-25 20:33:18,082 - Recv: <<< do_blocking_move_to
2020-01-25 20:33:18,116 - Recv:  T:18.24 /0.00 B:19.84 /0.00 @:0 B@:0
2020-01-25 20:33:18,617 - Recv:   current_position= X194.00 Y160.00 Z5.00 : sync_plan_position
2020-01-25 20:33:18,620 - Recv:   current_position= X194.00 Y160.00 Z5.00 : Leveling OFF
2020-01-25 20:33:18,623 - Recv:   current_position= X194.00 Y160.00 Z5.14 : ...Now ON
2020-01-25 20:33:18,625 - Recv:   current_position= X194.00 Y160.00 Z5.14 : sync_plan_position
2020-01-25 20:33:18,631 - Recv: X:194.00 Y:160.00 Z:5.14 E:0.00 Count X:19400 Y:16000 Z:2000
2020-01-25 20:33:18,634 - Recv: <<< G28
2020-01-25 20:33:18,636 - Recv: ok
2020-01-25 20:33:20,115 - Recv:  T:19.06 /0.00 B:19.41 /0.00 @:0 B@:0
2020-01-25 20:33:22,116 - Recv:  T:18.12 /0.00 B:19.45 /0.00 @:0 B@:0
2020-01-25 20:33:24,123 - Recv:  T:18.67 /0.00 B:18.95 /0.00 @:0 B@:0
2020-01-25 20:33:26,124 - Recv:  T:19.41 /0.00 B:18.24 /0.00 @:0 B@:0
2020-01-25 20:33:28,124 - Recv:  T:18.67 /0.00 B:18.40 /0.00 @:0 B@:0
2020-01-25 20:33:30,124 - Recv:  T:19.26 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:33:32,123 - Recv:  T:18.52 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:33:32,949 - Send: G1 X150 Y150
2020-01-25 20:33:32,967 - Recv: echo:G1 X150 Y150
2020-01-25 20:33:32,982 - Recv: ok
2020-01-25 20:33:34,124 - Recv:  T:18.48 /0.00 B:18.55 /0.00 @:0 B@:0
2020-01-25 20:33:36,123 - Recv:  T:19.37 /0.00 B:19.26 /0.00 @:0 B@:0
2020-01-25 20:33:38,123 - Recv:  T:18.79 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:33:40,123 - Recv:  T:19.06 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:33:42,123 - Recv:  T:19.57 /0.00 B:20.04 /0.00 @:0 B@:0
2020-01-25 20:33:44,123 - Recv:  T:18.95 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:33:46,123 - Recv:  T:18.95 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:33:48,123 - Recv:  T:18.83 /0.00 B:18.28 /0.00 @:0 B@:0
2020-01-25 20:33:50,128 - Recv:  T:19.14 /0.00 B:18.20 /0.00 @:0 B@:0
2020-01-25 20:33:52,128 - Recv:  T:19.57 /0.00 B:17.89 /0.00 @:0 B@:0
2020-01-25 20:33:54,128 - Recv:  T:18.95 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:33:56,127 - Recv:  T:17.89 /0.00 B:18.83 /0.00 @:0 B@:0
2020-01-25 20:33:58,128 - Recv:  T:18.91 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:33:59,470 - Send: NOTE: Z SHOWS 5.14MM, DIAL INDICATOR CHANGED FROM 0.00 to 0.07
2020-01-25 20:33:59,482 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 1
2020-01-25 20:33:59,491 - Recv: Resend: 2
2020-01-25 20:33:59,500 - Recv: ok
2020-01-25 20:34:00,127 - Recv:  T:18.67 /0.00 B:19.49 /0.00 @:0 B@:0
2020-01-25 20:34:02,111 - Send: G1 Z0
2020-01-25 20:34:02,148 - Recv: echo:G1 Z0
2020-01-25 20:34:02,158 - Recv: ok
2020-01-25 20:34:02,168 - Recv:  T:19.18 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:34:04,132 - Recv:  T:19.49 /0.00 B:20.12 /0.00 @:0 B@:0
2020-01-25 20:34:06,128 - Recv:  T:19.02 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:34:08,127 - Recv:  T:18.48 /0.00 B:20.00 /0.00 @:0 B@:0
2020-01-25 20:34:10,127 - Recv:  T:18.36 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:34:12,127 - Recv:  T:18.71 /0.00 B:19.30 /0.00 @:0 B@:0
2020-01-25 20:34:14,127 - Recv:  T:18.83 /0.00 B:19.77 /0.00 @:0 B@:0
2020-01-25 20:34:16,127 - Recv:  T:18.32 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:34:18,127 - Recv:  T:18.24 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:34:20,128 - Recv:  T:18.44 /0.00 B:19.37 /0.00 @:0 B@:0
2020-01-25 20:34:22,127 - Recv:  T:18.52 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:34:24,127 - Recv:  T:18.67 /0.00 B:20.00 /0.00 @:0 B@:0
2020-01-25 20:34:26,128 - Recv:  T:18.67 /0.00 B:19.22 /0.00 @:0 B@:0
2020-01-25 20:34:28,127 - Recv:  T:19.18 /0.00 B:19.65 /0.00 @:0 B@:0
2020-01-25 20:34:30,127 - Recv:  T:19.22 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:34:32,126 - Recv:  T:19.57 /0.00 B:17.77 /0.00 @:0 B@:0
2020-01-25 20:34:34,128 - Recv:  T:19.65 /0.00 B:18.98 /0.00 @:0 B@:0
2020-01-25 20:34:36,127 - Recv:  T:19.18 /0.00 B:18.44 /0.00 @:0 B@:0
2020-01-25 20:34:38,127 - Recv:  T:17.62 /0.00 B:19.65 /0.00 @:0 B@:0
2020-01-25 20:34:40,128 - Recv:  T:19.10 /0.00 B:19.18 /0.00 @:0 B@:0
2020-01-25 20:34:42,128 - Recv:  T:17.42 /0.00 B:18.67 /0.00 @:0 B@:0
2020-01-25 20:34:44,128 - Recv:  T:19.57 /0.00 B:18.48 /0.00 @:0 B@:0
2020-01-25 20:34:46,127 - Recv:  T:18.79 /0.00 B:19.10 /0.00 @:0 B@:0
2020-01-25 20:34:48,127 - Recv:  T:17.89 /0.00 B:19.80 /0.00 @:0 B@:0
2020-01-25 20:34:50,128 - Recv:  T:18.91 /0.00 B:18.75 /0.00 @:0 B@:0
2020-01-25 20:34:52,128 - Recv:  T:19.02 /0.00 B:19.53 /0.00 @:0 B@:0
2020-01-25 20:34:54,128 - Recv:  T:18.91 /0.00 B:19.69 /0.00 @:0 B@:0
2020-01-25 20:34:56,127 - Recv:  T:19.34 /0.00 B:18.05 /0.00 @:0 B@:0
2020-01-25 20:34:58,127 - Recv:  T:19.30 /0.00 B:19.14 /0.00 @:0 B@:0
2020-01-25 20:35:00,127 - Recv:  T:18.95 /0.00 B:19.06 /0.00 @:0 B@:0
2020-01-25 20:35:02,127 - Recv:  T:19.34 /0.00 B:18.28 /0.00 @:0 B@:0
2020-01-25 20:35:04,127 - Recv:  T:19.18 /0.00 B:18.79 /0.00 @:0 B@:0
2020-01-25 20:35:06,129 - Recv:  T:19.45 /0.00 B:19.80 /0.00 @:0 B@:0