Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.08.22 22:00:59 =~=~=~=~=~=~=~=~=~=~=~=
- ipq40xx_ess_sw_init done
- eth0
- Creating 1 MTD partitions on "nand1":
- 0x00000000-0x08000000 : "mtd=0"
- UBI: attaching mtd2 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 126976 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: VID header offset: 2048 (aligned 2048)
- UBI: data offset: 4096
- UBI: max. sequence number: 18280
- UBI: attached mtd2 to ubi0
- UBI: MTD device name: "mtd=0"
- UBI: MTD device size: 128 MiB
- UBI: number of good PEBs: 1024
- UBI: number of bad PEBs: 0
- UBI: number of corrupted PEBs: 0
- UBI: max. allowed volumes: 128
- UBI: wear-leveling threshold: 4096
- UBI: number of internal volumes: 1
- UBI: number of user volumes: 6
- UBI: available PEBs: 30
- UBI: total number of reserved PEBs: 994
- UBI: number of PEBs reserved for bad PEB handling: 10
- UBI: max/mean erase counter: 190/18
- UBI: image sequence number: 1543254291
- UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
- UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram
- UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory
- UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2
- UBI: 3 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 5 linux
- UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2
- UBI: 5 b5 1 0 dynamic 1f000 b5 15eb000 1f000 0 0 5 jffs2
- UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
- Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ec0ce8
- EEPROM set 0: OK (version 20)
- Read 0x1f000 bytes from volume [Factory2] offset 0x0 to 86ec0ce8
- EEPROM set 1: OK (version 20)
- Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86f04318
- Select EEPROM set 0 at offset 0x0.
- Please choose the operation:
- 1: Load System code to SDRAM via TFTP.
- 2: Load System code then write to Flash via TFTP.
- 3: Boot System code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- You choosed 2
- 2: Load System code then write to Flash via TFTP.
- Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
- Please Input new ones /or Ctrl-C to discard
- Input device IP (192.168.1.1) ==:
- Input server IP (192.168.1.70) ==:
- Input Linux Kernel filename (RT-AC58U.itb) ==:RT-AC58.T trx
- preferred nic: eth0
- eth0 PHY0 up Speed :1000 Full duplex
- eth0 PHY1 Down Speed :10 Half duplex
- eth0 PHY2 Down Speed :10 Half duplex
- eth0 PHY3 Down Speed :10 Half duplex
- eth0 PHY4 Down Speed :10 Half duplex
- switch prereq:0
- Using eth0 device
- TFTP from server 192.168.1.70; our IP address is 192.168.1.1
- Filename 'RT-AC58.trx'.
- Load address: 0x84000000
- Loading: *Got ARP REPLY, set eth addr (00:90:f5:e9:a0:73)
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ########################################################Got ARP REQUEST, return our IP
- #########
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ##################
- done
- Bytes transferred = 23054836 (15fc9f4 hex)
- NetBootFileXferSize= 015fc9f4
- 0x15fc9b4 bytes written to volume linux
- 0x15fc9b4 bytes written to volume linux2
- FIT/FDT format image found at 0x84000040, size 0x015fc974
- ## Booting kernel from FIT Image at 84000040 ...
- Using 'config@1' configuration
- Trying 'kernel@1' kernel subimage
- Description: ARM OpenWrt Linux-3.0
- Type: Kernel Image
- Compression: lzma compressed
- Data Start: 0x84000120
- Data Size: 2091127 Bytes = 2 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x80208000
- Entry Point: 0x80208000
- Hash algo: crc32
- Hash value: 85fd7d65
- FIT/FDT format image found at 0x84000040, size 0x015fc974
- ## Loading init Ramdisk from FIT Image at 84000040 ...
- Using 'config@1' configuration
- Trying 'rootfs@1' ramdisk subimage
- Description: Root File System
- Type: RAMDisk Image
- Compression: lzma compressed
- Data Start: 0x841fea78
- Data Size: 20927914 Bytes = 20 MiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: 7a6cc620
- FIT/FDT format image found at 0x84000040, size 0x015fc974
- ## Flattened Device Tree from FIT Image at 84000040
- Using 'config@1' configuration
- Trying 'fdt@1' FDT blob subimage
- Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x855f4120
- Data Size: 34175 Bytes = 33.4 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: db893700
- Hash algo: sha1
- Hash value: 8a1d44bb71c536ad38d793af0a7851f0e2bd2fef
- Booting using the fdt blob at 0x855f4120
- Read 0x28 bytes from volume [linux2] offset 0x0 to 86edfc50
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 86ed4000, end 86edf57e ... OK
- Using machid 0x8010100 from environment
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Linux version 3.14.77 (barton@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Tue May 23 17:15:10 CST 2017
- CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2
- Memory policy: Data cache writealloc
- PERCPU: Embedded 8 pages/cpu @c7ccb000 s8576 r8192 d16000 u32768
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32000
- Kernel command line: root_rfs=0x001fea38 flash_type=norplusnand ubi.mtd=UBI_DEV clk_ignore_unused
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 121548K/129024K available (3950K kernel code, 199K rwdata, 1152K rodata, 172K init, 601K bss, 7476K reserved, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0208000 - 0xc0703c1c (5104 kB)
- .init : 0xc0704000 - 0xc072f180 ( 173 kB)
- .data : 0xc0730000 - 0xc0761da8 ( 200 kB)
- .bss : 0xc0761da8 - 0xc07f8314 ( 602 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptible hierarchical RCU implementation.
- NR_IRQS:16 nr_irqs:16 16
- Architected cp15 timer(s) running at 48.00MHz (virt).
- sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
- Switching to timer-based delay loop
- Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x802133a0 - 0x802133f8
- CPU1: Booted secondary processor
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: Booted secondary processor
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: Booted secondary processor
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (384.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- pinctrl core: initialized pinctrl subsystem
- regulator-dummy: no parameters
- NET: Registered protocol family 16
- DMA: preallocated 2048 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
- hw-breakpoint: CPU 1 failed to disable vector catch
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
- Version Rollback Feature Disabled
- sps:sps is ready.
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- msm_bus_fabric_init_driver
- msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
- msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
- Switched to clocksource arch_sys_counter
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- msgmni has been set to 237
- Key type asymmetric registered
- Asymmetric key parser 'x509' registered
- io scheduler noop registered
- io scheduler deadline registered (default)
- tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
- tcsr 1953000.ess_tcsr: setting ess interface select = 0
- tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
- tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- msm_serial 78af000.serial: msm_serial: detected port #0
- msm_serial 78af000.serial: uartclk = 1843200
- 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
- msm_serial: console setup on port #0
- console [ttyMSM0] enabled
- msm_serial: driver initialized
- msm_serial_hsl_init: driver initialized
- msm_serial_hs module loaded
- qca_serial_hs module loaded
- brd: module loaded
- sps: BAM device 0x07884000 is not registered yet.
- sps:BAM 0x07884000 is registered.
- sps:BAM 0x07884000 (va:0xc8f40000) enabled: ver:0x19, number of pipes:12
- m25p80 spi0.0: found mx25l1606e, expected n25q128a11
- m25p80 spi0.0: mx25l1606e (2048 Kbytes)
- Creating 1 MTD partitions on "msm-nor0":
- 0x000000000000-0x000000200000 : "Bootloader"
- IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
- Hooking IMQ after NAT on PREROUTING.
- Hooking IMQ before NAT on POSTROUTING.
- libphy: ipq40xx_mdio: probed
- ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- PPTP driver version 0.8.5
- i2c /dev entries driver
- nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
- nand: Winbond W25N01GV 128MiB 3.3V
- nand: 128MiB, SLC, page size: 2048, OOB size: 64
- Scanning device for bad blocks
- random: nonblocking pool is initialized
- 1 ofpart partitions found on MTD device spi0.1
- Creating 1 MTD partitions on "spi0.1":
- 0x000000000000-0x000008000000 : "UBI_DEV"
- nf_conntrack version 0.5.0 (1899 buckets, 7596 max)
- xt_time: kernel timezone is -0000
- gre: GRE over IPv4 demultiplexor driver
- ip_tables: (C) 2000-2006 Netfilter Core Team
- arp_tables: (C) 2002 David S. Miller
- TCP: cubic registered
- NET: Registered protocol family 10
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 17
- l2tp_core: L2TP core driver, V2.0
- l2tp_ppp: PPPoL2TP kernel driver, V2.0
- l2tp_netlink: L2TP netlink interface
- 8021q: 802.1Q VLAN Support v1.8
- Registering SWP/SWPB emulation handler
- regulator-dummy: disabling
- UBI: attaching mtd1 to ubi0
- UBI: scanning is finished
- UBI: attached mtd1 (name "UBI_DEV", size 128 MiB) to ubi0
- UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- UBI: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0
- UBI: user volume: 6, internal volumes: 1, max. volumes count: 128
- UBI: max/mean erase counter: 194/18, WL threshold: 4096, image sequence number: 1543254291
- UBI: available PEBs: 20, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 20
- UBI: background thread "ubi_bgt0d" started, PID 69
- gluebi_create: Hook read/write method of Factory.
- gluebi_create: Hook read/write method of Factory2.
- [Factory-0]: OK (ver: 20)
- [Factory2-0]: OK (ver: 20)
- Select [Factory-0]
- Creating 1 MTD partitions on "linux":
- 0x0000001fea38-0x000003013000 : "rootfs"
- mtd: device 6 (rootfs) set to be root filesystem
- Creating 1 MTD partitions on "linux2":
- 0x0000001fea38-0x000003013000 : "rootfs2"
- gluebi_create: skip jffs2 volume
- clk: Not disabling unused clocks
- VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
- Freeing unused kernel memory: 172K (c0704000 - c072f000)
- offset 0x52800 elapse 60ms
- 1: set_action 0
- Hit ENTER for console...
- firmware version: 3.0.0.4.380_7485-g95cadeb
- bootloader version: RT-AC58U-01-00-00-03
- firmware version: 3.0.0.4
- [1 init:init_nvram +16] init_nvram for model(61)
- set_basic_ifname_vars: WAN eth0 LAN eth1 2G ath0 5G ath1 USB usb AP_LAN eth1 DW_WAN (null) DW_LAN eth2 force_dwlan 0, sw_mode 1
- wan_ifnames: eth0
- num_of_mssid_support(0x0088): [mssid] support [3] mssid
- get_lan_mac_name: Define LAN MAC address for model 61
- ess-switch DT exist!
- switchreg_base_addr: 0xc000000
- switchreg_size: 0x80000
- switch_access_mode: local bus
- wan bmp:0x20
- ess-psgmii DT exist!
- mac mode=0
- current mac mode = 0
- current dts led_source_num is 0
- mdio DT exist!
- ssdk_plat_init start
- enable ess clk
- reset ok in probe!
- PHY ID is 0x4dd0b1
- qca probe malibu phy driver succeeded!
- Dakota Chip version 0x1401
- qca-ssdk module init succeeded!
- hotplug net INTERFACE=eth0 ACTION=add
- hotplug net INTERFACE=eth1 ACTION=add
- get_lan_mac_name: Define LAN MAC address for model 61
- get_wan_mac_name: Define WAN MAC address for model 61
- config_switch(0x01a3): link down all ports
- config_ipq40xx_LANWANPartition: LAN/WAN/WANS_LAN portmask 0000001e/00000020/00000000
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- SSDK Init OK!
- operate done.
- config_switch(0x01e7): ISP Profile/STB: none/0
- config_switch(0x0312): link up wan port(s)
- bled: GPIO#1: netdev eth0.
- bled: GPIO#2: netdev eth1.
- bled: GPIO#58: netdev ath0.
- bled: GPIO#5: netdev ath1.
- bled: GPIO#0: USB BUS mask c.
- mem_manager: module license 'unspecified' taints kernel.
- Disabling lock debugging due to kernel taint
- __mm_init_module
- ath_dfs: Version 2.0.0
- Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
- ath_spectral: Version 2.0.0
- Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
- ath_hal: 0.9.17.1 (WRITE_EEPROM, 11D)
- ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
- ath_tx99: Version 2.0
- Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
- ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
- *********** IPQ4019 *************Wifi0 CPU frequency 250000000
- hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
- hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
- __ol_ath_attach() Allocated scn c57804c0
- __ol_ath_attach: dev name wifi0
- ol_ath_attach interface_id 0
- ol_target_init() BMI inited.
- ol_target_init() BMI Get Target Info.
- Chip id: 0xb, chip version: 0x1000000
- CE WAR Disabled
- NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
- ol_target_init() configure Target .
- Target Version is 1000000
- Flash Download Address c0000
- ol_transfer_bin_file: flash data file defined
- ol_transfer_bin_file[3683] Get Caldata for wifi0.
- qc98xx_verify_checksum: flash checksum passed: 0xa12e
- ol_transfer_bin_file 3749: Download Flash data len 12064
- Board extended Data download address: 0x0
- Board data initialized
- ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
- Selecting OTP binary for CHIP Version -1085567476
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 0, Download data len 4680
- First OTP send param 8000
- ol_ath_download_firmware :First OTP download and Execute is good address:0x4000 return param 4660
- ol_ath_download_firmware:##Board Id 16 , CHIP Id 0
- ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
- wifi0: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi0.bin
- ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi0.bin
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 3, Download data len 12064
- Board extended Data download address: 0x0
- ol_ath_download_firmware: Using 0x1234 for the remainder of init
- Selecting OTP binary for CHIP Version -1085567476
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 0, Download data len 4680
- [Flash] : Ignore Module param
- Second otp download Param 10000
- ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
- Mission mode: Firmware CHIP Version -1085567476
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- Swap: bytes_left to copy: fw:16; dma_page:102441
- Swap: wrong length read:0
- ol_swap_wlan_memory_expansion: Swap total_bytes copied: 159703 Target address 417230
- scn=c57804c0 target_write_addr=417230 seg_info=c5f50510
- ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
- bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
- ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 1, Download data len 366516
- ol_target_init() Download FW done.
- ol_ath_attach() WMI attached. wmi_handle c79dc000
- wmi_unified_register_event_handler: Event id 62 is unavailable
- +htc_create .. HIF :c56d8000-htc_create: (0xc7184000)
- htc_wmi_init() HT Create . c7184000
- htc_wmi_init 7534 host_enable 0 nss_nwifi_offload 0
- ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
- OL_ACBKMinfree : 0
- OL_ACBEMinfree : 0
- OL_ACVIMinfree : 0
- OL_ACVOMinfree : 0
- hif_enable_fastpath, Enabling fastpath mode
- +HWT
- hif_completion_thread_startup: pipe_num:0 pipe_info:0xc56dc578hif_completion_thread_startup: pipe_num:3 pipe_info:0xc56dc650hif_completion_thread_startup: pipe_num:4 pipe_info:0xc56dc698
- -HWT
- Startup Mode-0 set
- <=== cfg max peer id 544 ====>
- htt_peer_map_timer_init Enter pdev c4cc0000 hrtimer c4cc4888
- htt_alloc_peer_map_mem : Alloc Success : host q vaddr c57dc000 paddr 857dc000
- htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
- ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c4920000
- Firmware_Build_Number:61
- FW wireless modes: 0x680c
- num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
- btcoex_support 0, wlan_prio_gpio 0, coex_gpio_pin 0 0 0
- wmi_service_coex_gpio 1, wmi_service_4_wire_coex_support 0, coex_version 0
- Sending Ext resource cfg: HOST PLATFORM as 0
- fw_feature_bitmap as 50 to TGT
- ol_ath_service_ready_event: tt_support: 1
- ol_ath_service_ready_event: periodic_chan_stats: 1
- ol_ath_service_ready_event: sw_cal_support_check_flag: 1
- Peer Caching Enabled ; num_peers = 146, num_active_peers = 52 num_tids = 104, num_vdevs = 17
- idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
- idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
- idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
- idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 147
- ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 147 unit_len 744,
- idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
- ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
- idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
- idx 6 req 5 num_units 0 num_unit_info 2 unit size 2044 actual units 147
- ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 147 unit_len 2044,
- Support not added yet for Service 91
- Support not added yet for Service 92
- No EXT_MSG send INIT now
- chunk 0 len 13568 requested , ptr 0x84980000
- chunk 1 len 54272 requested , ptr 0x84990000
- chunk 2 len 217088 requested , ptr 0x849c0000
- chunk 3 len 109368 requested , ptr 0x849a0000
- chunk 4 len 107520 requested , ptr 0x84a00000
- chunk 5 len 6144 requested , ptr 0x85762000
- chunk 6 len 300468 requested , ptr 0x84a80000
- ol_ath_service_ready_event[4265] WAPI MBSSID 2
- Version = 16777216 3 status = 0
- ol_ath_connect_htc() WMI is ready
- htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
- target uses HTT version 2.2; host uses 2.2
- ol_ath_attach() connect HTC.
- bypasswmi : 0
- ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
- ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
- ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
- ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
- ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
- ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
- ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
- ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
- ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
- ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
- OL Resmgr Init-ed
- ieee80211_bsteering_attach: Band steering initialized
- acfg_attach: 2884: Netlink socket created:c56d1000
- SPECTRAL : get_capability not registered
- HAL_CAP_PHYDIAG : Capable
- SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
- SPECTRAL : get_capability not registered
- HAL_CAP_RADAR : Capable
- SPECTRAL : Need to fix the capablity check for SPECTRAL
- (spectral_attach : 242)
- SPECTRAL : get_capability not registered
- HAL_CAP_SPECTRAL_SCAN : Capable
- SPECTRAL : get_tsf64 not registered
- spectral_init_netlink 78 NULL SKB
- Green-AP : Green-AP : Attached
- Green-AP : Attached
- rate power table override is only supported for AR98XX
- ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
- ol_if_dfs_attach: called; ptr=c498998c, radar_info=c56c5c10
- dfs_attach: event log enabled by default
- >>>> CB Set (null)
- ol_ath_attach() UMAC attach .
- BURSTING enabled by default
- ol_ath_attach: Set global_ic[1] ..ptr:bf372020
- ath_lowi_if_netlink_init LOWI Netlink successfully created
- osif_wrap_attach:441 osif wrap attached
- osif_wrap_devt_init:402 osif wrap dev table init done
- Wrap Attached: Wrap_com =c67cfa00 ic->ic_wrap_com=c67cfa00 &wrap_com->wc_devt=c67cfa00
- __ol_ath_attach: needed_headroom reservation 60
- ol_ath_thermal_mitigation_attach: --
- ol_ath_ahb_probe num_radios=0, wifi_radios[0].sc = c57804c0 wifi_radio_type = 2
- ath_sysfs_diag_init: diag_fsattr
- *********** IPQ4019 *************hotplug net INTERFACE=wifi0 ACTION=add
- Wifi1 CPU frequency 250000000
- hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
- hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
- __ol_ath_attach() Allocated scn c4b804c0
- __ol_ath_attach: dev name wifi1
- ol_ath_attach interface_id 1
- ol_target_init() BMI inited.
- ol_target_init() BMI Get Target Info.
- Chip id: 0xb, chip version: 0x1000000
- CE WAR Disabled
- NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
- ol_target_init() configure Target .
- Target Version is 1000000
- Flash Download Address c0000
- ol_transfer_bin_file: flash data file defined
- ol_transfer_bin_file[3683] Get Caldata for wifi1.
- qc98xx_verify_checksum: flash checksum passed: 0x3309
- ol_transfer_bin_file 3749: Download Flash data len 12064
- Board extended Data download address: 0x0
- Board data initialized
- ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
- Selecting OTP binary for CHIP Version -1085567476
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 0, Download data len 4680
- First OTP send param 8000
- ol_ath_download_firmware :First OTP download and Execute is good address:0x4400 return param 4660
- ol_ath_download_firmware:##Board Id 17 , CHIP Id 0
- ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
- wifi1: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi1.bin
- ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi1.bin
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 3, Download data len 12064
- Board extended Data download address: 0x0
- ol_ath_download_firmware: Using 0x1234 for the remainder of init
- Selecting OTP binary for CHIP Version -1085567476
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 0, Download data len 4680
- [Flash] : Ignore Module param
- Second otp download Param 10000
- ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
- Mission mode: Firmware CHIP Version -1085567476
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- Swap: bytes_left to copy: fw:16; dma_page:102441
- Swap: wrong length read:0
- ol_swap_wlan_memory_expansion: Swap total_bytes copied: 159703 Target address 417230
- scn=c4b804c0 target_write_addr=417230 seg_info=c4af6510
- ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
- bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
- ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- [wifi0] FWLOG: [146501] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [146501] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3546: downloading file 1, Download data len 366516
- 0x0 )
- [wifi0] FWLOG: [146501] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [146501] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [146609] UNKNOWN 22:55 ( 0x3a, 0xa10, 0x160, 0x0, 0x12 )
- ol_target_init() Download FW done.
- ol_ath_attach() WMI attached. wmi_handle c57c8000
- wmi_unified_register_event_handler: Event id 62 is unavailable
- +htc_create .. HIF :c4b58000-htc_create: (0xc7187000)
- htc_wmi_init() HT Create . c7187000
- htc_wmi_init 7534 host_enable 0 nss_nwifi_offload 0
- ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
- OL_ACBKMinfree : 0
- OL_ACBEMinfree : 0
- OL_ACVIMinfree : 0
- OL_ACVOMinfree : 0
- hif_enable_fastpath, Enabling fastpath mode
- +HWT
- hif_completion_thread_startup: pipe_num:0 pipe_info:0xc4b5c578hif_completion_thread_startup: pipe_num:3 pipe_info:0xc4b5c650hif_completion_thread_startup: pipe_num:4 pipe_info:0xc4b5c698
- -HWT
- Startup Mode-0 set
- <=== cfg max peer id 544 ====>
- htt_peer_map_timer_init Enter pdev c4180000 hrtimer c4184888
- htt_alloc_peer_map_mem : Alloc Success : host q vaddr c4200000 paddr 84200000
- htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
- ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c3e00000
- Firmware_Build_Number:61
- FW wireless modes: 0x1f9001
- num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
- wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
- Sending Ext resource cfg: HOST PLATFORM as 0
- fw_feature_bitmap as 50 to TGT
- ol_ath_service_ready_event: tt_support: 1
- ol_ath_service_ready_event: periodic_chan_stats: 1
- ol_ath_service_ready_event: sw_cal_support_check_flag: 1
- Peer Caching Enabled ; num_peers = 146, num_active_peers = 52 num_tids = 104, num_vdevs = 17
- idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
- idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
- idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
- idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 147
- ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 147 unit_len 744,
- idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
- ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
- idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
- idx 6 req 5 num_units 0 num_unit_info 2 unit size 2044 actual units 147
- ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 147 unit_len 2044,
- Support not added yet for Service 91
- Support not added yet for Service 92
- No EXT_MSG send INIT now
- chunk 0 len 13568 requested , ptr 0x83e64000
- chunk 1 len 54272 requested , ptr 0x83e70000
- chunk 2 len 217088 requested , ptr 0x83e80000
- chunk 3 len 109368 requested , ptr 0x83ec0000
- chunk 4 len 107520 requested , ptr 0x83ee0000
- chunk 5 len 6144 requested , ptr 0x83dc6000
- chunk 6 len 300468 requested , ptr 0x83f00000
- ol_ath_service_ready_event[4265] WAPI MBSSID 2
- Version = 16777216 3 status = 0
- ol_ath_connect_htc() WMI is ready
- htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
- target uses HTT version 2.2; host uses 2.2
- ol_ath_attach() connect HTC.
- bypasswmi : 0
- ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
- Add VHT80 channel: 5210
- Add VHT80 channel: 5775
- Skipping VHT80 channel 5825
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
- OL Resmgr Init-ed
- ieee80211_bsteering_attach: Band steering initialized
- acfg_attach: Offload using existing sock c56d1000
- SPECTRAL : get_capability not registered
- HAL_CAP_PHYDIAG : Capable
- SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
- SPECTRAL : get_capability not registered
- HAL_CAP_RADAR : Capable
- SPECTRAL : Need to fix the capablity check for SPECTRAL
- (spectral_attach : 242)
- SPECTRAL : get_capability not registered
- HAL_CAP_SPECTRAL_SCAN : Capable
- SPECTRAL : get_tsf64 not registered
- spectral_init_netlink 78 NULL SKB
- Green-AP : Green-AP : Attached
- Green-AP : Attached
- rate power table override is only supported for AR98XX
- ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
- ol_if_dfs_attach: called; ptr=c3f5198c, radar_info=c56c5c10
- dfs_attach: event log enabled by default
- >>>> CB Set (null)
- ol_ath_attach() UMAC attach .
- BURSTING enabled by default
- ol_ath_attach: Set global_ic[2] ..ptr:bf372020
- ath_lowi_if_netlink_init Incremented LOWI netlink ref count: 2
- osif_wrap_attach:441 osif wrap attached
- osif_wrap_devt_init:402 osif wrap dev table init done
- Wrap Attached: Wrap_com =c4acb800 ic->ic_wrap_com=c4acb800 &wrap_com->wc_devt=c4acb800
- __ol_ath_attach: needed_headroom reservation 60
- ol_ath_thermal_mitigation_attach: --
- ol_ath_ahb_probe num_radios=1, wifi_radios[1].sc = c4b804c0 wifi_radio_type = 2
- ath_sysfs_diag_init: diag_fsattr
- ath_ol_pci: (Atheros/multi-bss)
- hotplug net INTERFACE=wifi1 ACTION=add
- isCountryCodeValid: EEPROM regdomain 0x0
- ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
- ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
- ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
- ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
- ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
- ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
- ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
- ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
- ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
- isCountryCodeValid: EEPROM regdomain 0x0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
- Add VHT80 channel: 5210
- [wifi0] FWLOG: [149236] UNKNOWN 22:55 ( 0x37, 0x199, 0x130, 0x0, 0x32 )
- Add VHT80 channel: 5290
- Add VHT80 channel: 5530
- Skipping VHT80 channel 5580
- Skipping VHT80 channel 5660
- Skipping VHT80 channel 5680
- Skipping VHT80 channel 5700
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
- freq=58
- freq=106
- Switching to Tx Mode-1 Threshold 280
- [wifi1] FWLOG: [148826] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [148826] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [148826] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [148826] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [148922] UNKNOWN 22:55 ( 0x3a, 0xa10, 0x160, 0x10, 0x0 )
- [wifi1] FWLOG: [149329] UNKNOWN 22:55 ( 0x37, 0x199, 0x130, 0x30, 0x0 )
- init_wl(0x046d): init_wl:create wi node
- init_wl(0x047e):
- create a wifi node ath0 from wifi0
- wlan_vap_create : enter. devhandle=0xc57804c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
- send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:4d:7b:11:xx:xx:
- ieee80211_mbo_vattach:MBO Initialized
- ieee80211_oce_vattach: OCE Initialized
- wlan_vap_create : exit. devhandle=0xc57804c0, vap=0xc3f60000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- Enabling TX checksum bit for the vap ath0 features 4000
- Enabling SG bit for the vap ath0 features 4000
- Enabling SG bit for the vap ath0 features 4000
- Enabling TSO bit for the vap ath0 features 4000
- Enabling LRO bit for the vap ath0 features 4000
- VAP device ath0 created osifp: (c57784c0) os_if: (c3f60000)
- ath0
- hotplug net INTERFACE=ath0 ACTION=add
- Switching to Tx Mode-1 Threshold 280
- init_wl(0x047e):
- create a wifi node ath1 from wifi1
- wlan_vap_create : enter. devhandle=0xc4b804c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
- send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:4d:7b:11:xx:xx:
- ieee80211_mbo_vattach:MBO Initialized
- ieee80211_oce_vattach: OCE Initialized
- wlan_vap_create : exit. devhandle=0xc4b804c0, vap=0xc3828000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- Enabling TX checksum bit for the vap ath1 features 4000
- Enabling SG bit for the vap ath1 features 4000
- Enabling SG bit for the vap ath1 features 4000
- Enabling TSO bit for the vap ath1 features 4000
- Enabling LRO bit for the vap ath1 features 4000
- VAP device ath1 created osifp: (c577a4c0) os_if: (c3828000)
- ath1
- hotplug net INTERFACE=ath1 ACTION=add
- 1: check_action 0
- *** ubifs: 0, 5, 22982656
- / # start_logger:
- update_lan_state(lan_, 0, 0)
- start_lan: setting up the bridge br0
- _ifconfig: name=eth1 flags=1243 IFUP addr=(null) netmask=(null)
- hotplug net INTERFACE=br0 ACTION=add
- start_lan: setting MAC of br0 bridge to 70:4D:7B:11:xx:xx
- _ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0
- gen qca config
- mac_filter[0] = 0
- gen qca config
- mac_filter[0] = 0
- _ifconfig: name=ath0 flags=0000 addr=(null) netmask=(null)
- _ifconfig: name=ath1 flags=0000 addr=(null) netmask=(null)
- siwfreq
- Set freq vap 0 stop send + c3f60000
- Set freq vap 0 stop send -c3f60000
- Set wait done --c3f60000
- List Flushed
- siwfreq
- Set freq vap 0 stop send + c3828000
- Set freq vap 0 stop send -c3828000
- Set wait done --c3828000
- _ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0
- route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
- update_lan_state(lan_, 2, 0)
- nat_rule: stop_nat_rules 1.
- stop_nat_rules: apply the redirect_rules!
- start_lan 1937
- [1 init:start_dnsmasq +35] begin
- [1 init:stop_dnsmasq +35] begin
- # wanduck: Got LAN(-1) information:
- [1 init:stop_dnsmasq +35] end
- # Enable direct rule
- [1 init:start_dnsmasq +35] end
- get_lan_mac_name: Define LAN MAC address for model 61
- start_lan_port(0) 1
- TZ watchdog
- decomp: fname=/var/lib/misc/rstats-speed.gz
- decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0
- load: speed_count = 0
- load: read source= save_path=
- load_history: fname=/var/lib/misc/rstats-history.gz
- decomp: fname=/var/lib/misc/rstats-history.gz
- decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
- decomp: fname=/var/lib/misc/rstats-history.gz
- decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
- load_history: load failed
- disk_monitor: starting...
- disk_monitor: day=1, week=6, time=3:0.
- disk_monitor: decide if scan the target...
- disk_monitor: 0: wait_second=72000...
- disk_monitor: 1: wait_second=72000...
- disk_monitor: wait_second=72000...
- disk_monitor: Pause...
- get_lan_mac_name: Define LAN MAC address for model 61
- reinit_sfe:WAN: unit -1,0 type 4 nat_x 1 qos 0: action 1.
- start_wan: start_wan_if(0)!
- [1 init:start_wan_if +37] unit=0.
- update_wan_state(wan0_, 0, 0)
- convert_wan_nvram(wan0_)
- get_wan_mac_name: Define WAN MAC address for model 61
- ** wan_ifname: eth0 is NOT UP
- _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
- update_wan_state(wan0_, 1, 0)
- start_wan_if(0x0754): ifup:eth0
- _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
- start_wan_if(0x0758): start auth:0
- start_auth:: done
- start_wan_if(0x0761): start udhcpc:eth0, 0
- start_wan_if(): End.
- start_usb
- insmod dakota usb module....
- udhcpc_wan:: deconfig
- _ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null)
- wan_down(eth0)
- wan_down(eth0): .
- stop_auth:: done
- route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0
- update_wan_state(wan0_, 3, 0)
- update_wan_state(wan0_, 4, 3)
- udhcpc:: deconfig done
- get_lan_mac_name: Define LAN MAC address for model 61
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- vap-0(ath0):set SIOC80211NWID, 10 characters
- DES SSID SET=ASUS_C8_2G
- [wifi0] FWLOG: [159518] WAL_DBGID_DEV_RESET ( 0xc01d, 0x340 )
- Sending SCAN START cmd
- wmi_dbg_cfg_send: mod[0]00000000 dbgcfg50000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
- [wifi0] FWLOG: [159565] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
- ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
- ol_scan_unregister_event_handler: Failed to unregister evhandler=bf2c8de0 arg=c4a20000
- osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xc3f60000
- send_vdev_down_cmd_non_tlv for vap 0 (c79dc000)
- DEVICE IS DOWN ifname=ath0
- DEVICE IS DOWN ifname=ath0
- Sending SCAN START cmd
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- WARNING: Running kernel does not match configured kernel headers the driver was built with! The driver needs to be rebuilt with the correct kernel headers!
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- vap-0(ath1):set SIOC80211NWID, 10 characters
- DES SSID SET=ASUS_C8_5G
- Sending SCAN START cmd
- wmi_dbg_cfg_send: mod[0]00000000 dbgcfg50000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
- ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
- ol_scan_unregister_event_handler: Failed to unregister evhandler=bf2c8de0 arg=c3f80000
- osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xc3828000
- send_vdev_down_cmd_non_tlv for vap 0 (c57c8000)
- [wifi1] FWLOG: [161629] WAL_DBGID_DEV_RESET ( 0xc01d, 0x338 )
- [wifi1] FWLOG: [161676] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1
- DEVICE IS DOWN ifname=ath1
- DEVICE IS DOWN ifname=ath1
- Sending SCAN START cmd
- siwfreq
- Set freq vap 0 stop send + c3f60000
- ol_scan_unregister_event_handler: Failed to unregister evhandler=bf2c8de0 arg=c4a20000
- osif_vap_acs_cancel: Scan in progress.. Cancelling it vap: 0xc3f60000
- send_vdev_down_cmd_non_tlv for vap 0 (c79dc000)
- Set freq vap 0 stop send -c3f60000
- Set wait done --c3f60000
- Sending SCAN START cmd
- siwfreq
- Set freq vap 0 stop send + c3828000
- ol_scan_unregister_event_handler: Failed to unregister evhandler=bf2c8de0 arg=c3f80000
- osif_vap_acs_cancel: Scan in progress.. Cancelling it vap: 0xc3828000
- send_vdev_down_cmd_non_tlv for vap 0 (c57c8000)
- Set freq vap 0 stop send -c3828000
- Set wait done --c3828000
- Sending SCAN START cmd
- xhci-hcd xhci-hcd.0.auto: ## USB3 port 0/1 addr(ca470430) s1(000002a0) --> (000002a0)
- hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [1 init:init_main +42] recv signal 14 from pid [1:/sbin/init] (from user)
- send_vdev_down_cmd_non_tlv for vap 0 (c79dc000)
- mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
- OL vap_start +
- VDEV START
- OL vap_start -
- ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
- ol_vdev_start_resp_ev for vap 0 (c79dc000)
- send_wmm_update_cmd_non_tlv:
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- send_vdev_up_cmd_non_tlv for vap 0 (c79dc000)
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- send_vdev_down_cmd_non_tlv for vap 0 (c57c8000)
- OL vap_start +
- VDEV START
- OL vap_start -
- ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
- ol_vdev_start_resp_ev for vap 0 (c57c8000)
- send_wmm_update_cmd_non_tlv:
- ol_if_dfs_configure: ETSI domain
- udhcpc_wan:: leasefail
- [1 init:init_main +48] recv signal 14 from pid [1:/sbin/init] (from user)
- udhcpc_wan:: leasefail
- 458: check_action 0
- 458: set_action 7
- 458: set_action 0
- [1 init:init_main +87] recv signal 14 from pid [1:/sbin/init] (from user)
- udhcpc_wan:: leasefail
- cac_timeout cac expired, chan 5500 curr time 4294775
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
- send_vdev_up_cmd_non_tlv for vap 0 (c57c8000)
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement