API tools faq
paste
Advertisement
Guest User

ATA Error Count @ 35k+

a guest
Dec 5th, 2016
392
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.77 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Hitachi Ultrastar A7K2000
  3. Device Model: Hitachi HUA722020ALA331
  4. Serial Number: YBKNSA0F
  5. LU WWN Device Id: 5 000cca 221f3b57c
  6. Firmware Version: JKAOA3NH
  7. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  8. Sector Size: 512 bytes logical/physical
  9. Rotation Rate: 7200 rpm
  10. Form Factor: 3.5 inches
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ATA8-ACS T13/1699-D revision 4
  13. SATA Version is: SATA 2.6, 3.0 Gb/s
  14. Local Time is: Mon Dec 5 18:11:50 2016 PST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x85) Offline data collection activity
  23. was aborted by an interrupting command from host.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: (21889) seconds.
  30. Offline data collection
  31. capabilities: (0x5b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 365) minutes.
  48. SCT capabilities: (0x003d) SCT Status supported.
  49. SCT Error Recovery Control supported.
  50. SCT Feature Control supported.
  51. SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  57. 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 101
  58. 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 602
  59. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 8
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2
  61. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  62. 8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 34
  63. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4058
  64. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
  66. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27
  67. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 27
  68. 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 24/52)
  69. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
  70. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
  71. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  72. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  73.  
  74. SMART Error Log Version: 1
  75. ATA Error Count: 35550 (device log contains only the most recent five errors)
  76. CR = Command Register [HEX]
  77. FR = Features Register [HEX]
  78. SC = Sector Count Register [HEX]
  79. SN = Sector Number Register [HEX]
  80. CL = Cylinder Low Register [HEX]
  81. CH = Cylinder High Register [HEX]
  82. DH = Device/Head Register [HEX]
  83. DC = Device Command Register [HEX]
  84. ER = Error register [HEX]
  85. ST = Status register [HEX]
  86. Powered_Up_Time is measured from power on, and printed as
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  88. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  89.  
  90. Error 35550 occurred at disk power-on lifetime: 4056 hours (169 days + 0 hours)
  91. When the command that caused the error occurred, the device was active or idle.
  92.  
  93. After command completion occurred, registers were:
  94. ER ST SC SN CL CH DH
  95. -- -- -- -- -- -- --
  96. 40 51 3f 0b 41 a7 00 Error: UNC at LBA = 0x00a7410b = 10961163
  97.  
  98. Commands leading to the command that caused the error were:
  99. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  100. -- -- -- -- -- -- -- -- ---------------- --------------------
  101. 60 00 e0 4a 40 a7 40 00 37d+07:56:41.838 READ FPDMA QUEUED
  102. 2f 00 01 10 00 00 00 00 37d+07:56:41.834 READ LOG EXT
  103. 60 00 d0 4a 40 a7 40 00 37d+07:56:25.054 READ FPDMA QUEUED
  104. 2f 00 01 10 00 00 00 00 37d+07:56:25.049 READ LOG EXT
  105. 60 00 c0 4a 45 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  106.  
  107. Error 35549 occurred at disk power-on lifetime: 4056 hours (169 days + 0 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 51 3f 0b 41 a7 00 Error: UNC at LBA = 0x00a7410b = 10961163
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. 60 00 d0 4a 40 a7 40 00 37d+07:56:25.054 READ FPDMA QUEUED
  119. 2f 00 01 10 00 00 00 00 37d+07:56:25.049 READ LOG EXT
  120. 60 00 c0 4a 45 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  121. 60 00 b8 4a 44 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  122. 60 00 b0 4a 40 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  123.  
  124. Error 35548 occurred at disk power-on lifetime: 4056 hours (169 days + 0 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 3f 0b 41 a7 00 Error: UNC at LBA = 0x00a7410b = 10961163
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. 60 00 c0 4a 45 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  136. 60 00 b8 4a 44 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  137. 60 00 b0 4a 40 a7 40 00 37d+07:56:08.370 READ FPDMA QUEUED
  138. 2f 00 01 10 00 00 00 00 37d+07:56:08.367 READ LOG EXT
  139. 61 a0 a0 46 92 52 40 00 37d+07:55:51.364 WRITE FPDMA QUEUED
  140.  
  141. Error 35547 occurred at disk power-on lifetime: 4056 hours (169 days + 0 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 40 51 3f 0b 41 a7 00 Error: WP at LBA = 0x00a7410b = 10961163
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. 61 a0 a0 46 92 52 40 00 37d+07:55:51.364 WRITE FPDMA QUEUED
  153. 61 00 98 46 91 52 40 00 37d+07:55:51.282 WRITE FPDMA QUEUED
  154. 60 00 90 4a 45 a7 40 00 37d+07:55:51.282 READ FPDMA QUEUED
  155. 60 00 88 4a 44 a7 40 00 37d+07:55:51.282 READ FPDMA QUEUED
  156. 60 00 80 4a 40 a7 40 00 37d+07:55:51.281 READ FPDMA QUEUED
  157.  
  158. Error 35546 occurred at disk power-on lifetime: 4056 hours (169 days + 0 hours)
  159. When the command that caused the error occurred, the device was active or idle.
  160.  
  161. After command completion occurred, registers were:
  162. ER ST SC SN CL CH DH
  163. -- -- -- -- -- -- --
  164. 40 51 3f 0b 41 a7 00 Error: WP at LBA = 0x00a7410b = 10961163
  165.  
  166. Commands leading to the command that caused the error were:
  167. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  168. -- -- -- -- -- -- -- -- ---------------- --------------------
  169. 61 00 70 46 91 52 40 00 37d+07:55:34.710 WRITE FPDMA QUEUED
  170. 61 04 68 b5 a7 46 40 00 37d+07:55:34.706 WRITE FPDMA QUEUED
  171. 60 00 60 4a 45 a7 40 00 37d+07:55:34.704 READ FPDMA QUEUED
  172. 60 00 58 4a 44 a7 40 00 37d+07:55:34.638 READ FPDMA QUEUED
  173. 61 18 50 66 e0 41 40 00 37d+07:55:34.633 WRITE FPDMA QUEUED
  174.  
  175. SMART Self-test log structure revision number 1
  176. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  177. # 1 Short offline Completed without error 00% 4052 -
  178. # 2 Short offline Completed without error 00% 4040 -
  179. # 3 Short offline Completed without error 00% 4004 -
  180. # 4 Short offline Completed without error 00% 3992 -
  181. # 5 Short offline Completed without error 00% 3956 -
  182. # 6 Short offline Completed without error 00% 3944 -
  183. # 7 Short offline Completed without error 00% 3932 -
  184. # 8 Short offline Completed without error 00% 3920 -
  185. # 9 Short offline Completed without error 00% 3884 -
  186. #10 Short offline Completed without error 00% 3872 -
  187. #11 Short offline Completed without error 00% 3860 -
  188. #12 Short offline Completed without error 00% 3848 -
  189. #13 Short offline Completed without error 00% 3812 -
  190. #14 Short offline Completed without error 00% 3800 -
  191. #15 Short offline Completed without error 00% 3764 -
  192. #16 Short offline Completed without error 00% 3752 -
  193. #17 Short offline Completed without error 00% 3716 -
  194. #18 Short offline Completed without error 00% 3704 -
  195. #19 Short offline Completed without error 00% 3668 -
  196. #20 Short offline Completed without error 00% 3656 -
  197. #21 Short offline Completed without error 00% 3644 -
  198.  
  199. SMART Selective self-test log data structure revision number 1
  200. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  201. 1 0 0 Not_testing
  202. 2 0 0 Not_testing
  203. 3 0 0 Not_testing
  204. 4 0 0 Not_testing
  205. 5 0 0 Not_testing
  206. Selective self-test flags (0x0):
  207. After scanning selected spans, do NOT read-scan remainder of disk.
  208. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!