API tools faq
paste
Advertisement
Bullet64

RockPro64 with marvell 88SE9230

Bullet64
Feb 1st, 2019
308
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.72 KB | None | 0 0
raw download clone embed print report
  1. rock64@rockpro64v_2_1:~$ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  4. [ 0.000000] Machine model: Pine64 RockPro64
  5. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  6. [ 0.000000] printk: bootconsole [uart8250] enabled
  7. [ 0.000000] efi: Getting EFI parameters from FDT:
  8. [ 0.000000] efi: UEFI not found.
  9. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0x7efa4840-0x7efa5fff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  20. [ 0.000000] On node 0 totalpages: 523776
  21. [ 0.000000] DMA32 zone: 8184 pages used for memmap
  22. [ 0.000000] DMA32 zone: 0 pages reserved
  23. [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
  24. [ 0.000000] psci: probing for conduit method from DT.
  25. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  26. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  28. [ 0.000000] psci: SMC Calling Convention v1.0
  29. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  30. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  31. [ 0.000000] pcpu-alloc: s55896 r8192 d30120 u94208 alloc=23*4096
  32. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  33. [ 0.000000] Detected VIPT I-cache on CPU0
  34. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  35. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  36. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  37. [ 0.000000] Policy zone: DMA32
  38. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=1e:0e:99:52:8e:40 eth1addr= serial=15a3d3571288b28 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  39. [ 0.000000] Memory: 2006564K/2095104K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 72156K reserved, 16384K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  43. [ 0.000000] Tasks RCU enabled.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] GICv3: Distributor has no Range Selector support
  49. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  50. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  51. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  52. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e880000 (flat, esz 8, psz 64K, shr 0)
  53. [ 0.000000] ITS: using cache flushing for cmd queue
  54. [ 0.000000] GICv3: using LPI property table @0x000000007e840000
  55. [ 0.000000] GIC: using cache flushing for LPI property table
  56. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e850000
  57. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  64. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  65. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  66. [ 0.002917] Console: colour dummy device 80x25
  67. [ 0.003341] printk: console [tty0] enabled
  68. [ 0.003738] printk: bootconsole [uart8250] disabled
  69. [ 0.004308] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  70. [ 0.004342] pid_max: default: 32768 minimum: 301
  71. [ 0.004478] LSM: Security Framework initializing
  72. [ 0.005538] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  73. [ 0.006081] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  74. [ 0.006150] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.006190] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  76. [ 0.030987] ASID allocator initialised with 32768 entries
  77. [ 0.038985] rcu: Hierarchical SRCU implementation.
  78. [ 0.047114] Platform MSI: interrupt-controller@fee20000 domain created
  79. [ 0.047535] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  80. [ 0.051991] EFI services will not be available.
  81. [ 0.059892] smp: Bringing up secondary CPUs ...
  82. [ 0.092105] Detected VIPT I-cache on CPU1
  83. [ 0.092142] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  84. [ 0.092158] GICv3: CPU1: using allocated LPI pending table @0x000000007e860000
  85. [ 0.092203] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  86. [ 0.124188] Detected VIPT I-cache on CPU2
  87. [ 0.124217] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  88. [ 0.124229] GICv3: CPU2: using allocated LPI pending table @0x000000007e870000
  89. [ 0.124260] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  90. [ 0.156284] Detected VIPT I-cache on CPU3
  91. [ 0.156311] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  92. [ 0.156323] GICv3: CPU3: using allocated LPI pending table @0x000000007e900000
  93. [ 0.156352] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  94. [ 0.190974] CPU features: enabling workaround for EL2 vector hardening
  95. [ 0.191492] Detected PIPT I-cache on CPU4
  96. [ 0.192682] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  97. [ 0.193131] GICv3: CPU4: using allocated LPI pending table @0x000000007e910000
  98. [ 0.194306] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  99. [ 0.230546] Detected PIPT I-cache on CPU5
  100. [ 0.231695] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  101. [ 0.232116] GICv3: CPU5: using allocated LPI pending table @0x000000007e920000
  102. [ 0.233180] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  103. [ 0.236970] smp: Brought up 1 node, 6 CPUs
  104. [ 0.237366] SMP: Total of 6 processors activated.
  105. [ 0.237413] CPU features: detected: GIC system register CPU interface
  106. [ 0.237439] CPU features: detected: 32-bit EL0 Support
  107. [ 0.237474] CPU features: detected: CRC32 instructions
  108. [ 0.259298] CPU: All CPU(s) started at EL2
  109. [ 0.259784] alternatives: patching kernel code
  110. [ 0.263557] devtmpfs: initialized
  111. [ 0.281848] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  112. [ 0.282081] futex hash table entries: 2048 (order: 5, 131072 bytes)
  113. [ 0.283583] xor: measuring software checksum speed
  114. [ 0.323256] 8regs : 1154.000 MB/sec
  115. [ 0.363185] 8regs_prefetch: 42.000 MB/sec
  116. [ 0.403143] 32regs : 1415.000 MB/sec
  117. [ 0.443430] 32regs_prefetch: 1190.000 MB/sec
  118. [ 0.443457] xor: using function: 32regs (1415.000 MB/sec)
  119. [ 0.443496] pinctrl core: initialized pinctrl subsystem
  120. [ 0.447815] DMI not present or invalid.
  121. [ 0.449592] NET: Registered protocol family 16
  122. [ 0.454378] audit: initializing netlink subsys (disabled)
  123. [ 0.457636] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
  124. [ 0.462878] cpuidle: using governor menu
  125. [ 0.465560] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  126. [ 0.465686] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  127. [ 0.477292] DMA: preallocated 1024 KiB pool for atomic allocations
  128. [ 0.482668] Serial: AMBA PL011 UART driver
  129. [ 0.602456] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  130. [ 0.604398] cryptd: max_cpu_qlen set to 1000
  131. [ 0.673823] raid6: int64x1 gen() 219 MB/s
  132. [ 0.742346] raid6: int64x1 xor() 219 MB/s
  133. [ 0.811712] raid6: int64x2 gen() 8 MB/s
  134. [ 0.878695] raid6: int64x2 xor() 298 MB/s
  135. [ 0.946987] raid6: int64x4 gen() 517 MB/s
  136. [ 1.015429] raid6: int64x4 xor() 381 MB/s
  137. [ 1.083830] raid6: int64x8 gen() 490 MB/s
  138. [ 1.152259] raid6: int64x8 xor() 375 MB/s
  139. [ 1.220802] raid6: neonx1 gen() 364 MB/s
  140. [ 1.289128] raid6: neonx1 xor() 426 MB/s
  141. [ 1.357590] raid6: neonx2 gen() 583 MB/s
  142. [ 1.425952] raid6: neonx2 xor() 603 MB/s
  143. [ 1.494400] raid6: neonx4 gen() 754 MB/s
  144. [ 1.562764] raid6: neonx4 xor() 721 MB/s
  145. [ 1.631203] raid6: neonx8 gen() 820 MB/s
  146. [ 1.699613] raid6: neonx8 xor() 767 MB/s
  147. [ 1.699639] raid6: using algorithm neonx8 gen() 820 MB/s
  148. [ 1.699659] raid6: .... xor() 767 MB/s, rmw enabled
  149. [ 1.699684] raid6: using neon recovery algorithm
  150. [ 1.701630] ACPI: Interpreter disabled.
  151. [ 1.704621] vcc3v3_pcie: supplied by dc_12v
  152. [ 1.707718] vcc_sys: supplied by dc_12v
  153. [ 1.712574] vgaarb: loaded
  154. [ 1.713667] SCSI subsystem initialized
  155. [ 1.715183] libata version 3.00 loaded.
  156. [ 1.715839] usbcore: registered new interface driver usbfs
  157. [ 1.716342] usbcore: registered new interface driver hub
  158. [ 1.716804] usbcore: registered new device driver usb
  159. [ 1.719308] media: Linux media interface: v0.10
  160. [ 1.719514] videodev: Linux video capture interface: v2.00
  161. [ 1.719939] pps_core: LinuxPPS API ver. 1 registered
  162. [ 1.719981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  163. [ 1.720032] PTP clock support registered
  164. [ 1.724024] Advanced Linux Sound Architecture Driver Initialized.
  165. [ 1.725932] Bluetooth: Core ver 2.22
  166. [ 1.726150] NET: Registered protocol family 31
  167. [ 1.726171] Bluetooth: HCI device and connection manager initialized
  168. [ 1.726203] Bluetooth: HCI socket layer initialized
  169. [ 1.726226] Bluetooth: L2CAP socket layer initialized
  170. [ 1.726348] Bluetooth: SCO socket layer initialized
  171. [ 1.726405] NetLabel: Initializing
  172. [ 1.726422] NetLabel: domain hash size = 128
  173. [ 1.726439] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  174. [ 1.726550] NetLabel: unlabeled traffic allowed by default
  175. [ 1.731503] clocksource: Switched to clocksource arch_sys_counter
  176. [ 1.732436] VFS: Disk quotas dquot_6.6.0
  177. [ 1.732593] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  178. [ 1.732961] pnp: PnP ACPI: disabled
  179. [ 1.750589] NET: Registered protocol family 2
  180. [ 1.754602] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  181. [ 1.755513] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  182. [ 1.755826] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  183. [ 1.756227] TCP: Hash tables configured (established 16384 bind 16384)
  184. [ 1.756609] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  185. [ 1.756767] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  186. [ 1.757133] NET: Registered protocol family 1
  187. [ 1.765622] RPC: Registered named UNIX socket transport module.
  188. [ 1.765654] RPC: Registered udp transport module.
  189. [ 1.765673] RPC: Registered tcp transport module.
  190. [ 1.765691] RPC: Registered tcp NFSv4.1 backchannel transport module.
  191. [ 1.767495] PCI: CLS 0 bytes, default 64
  192. [ 1.768242] Trying to unpack rootfs image as initramfs...
  193. [ 2.349051] Freeing initrd memory: 7028K
  194. [ 2.357488] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  195. [ 2.360853] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  196. [ 2.361880] kvm [1]: 8-bit VMID
  197. [ 2.361926] kvm [1]: IPA Size Limit: 40bits
  198. [ 2.363766] kvm [1]: vgic-v2@fff20000
  199. [ 2.364151] kvm [1]: GIC system register CPU interface enabled
  200. [ 2.366670] kvm [1]: vgic interrupt IRQ10
  201. [ 2.370392] kvm [1]: Hyp mode initialized successfully
  202. [ 3.167687] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  203. [ 3.185025] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  204. [ 3.187183] NFS: Registering the id_resolver key type
  205. [ 3.187302] Key type id_resolver registered
  206. [ 3.187322] Key type id_legacy registered
  207. [ 3.187352] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  208. [ 3.187376] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  209. [ 3.189457] fuse init (API version 7.28)
  210. [ 3.191626] 9p: Installing v9fs 9p2000 file system support
  211. [ 4.890039] NET: Registered protocol family 38
  212. [ 4.906270] Key type asymmetric registered
  213. [ 4.906320] Asymmetric key parser 'x509' registered
  214. [ 4.906533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  215. [ 4.907424] io scheduler noop registered
  216. [ 4.907881] io scheduler cfq registered (default)
  217. [ 4.907904] io scheduler mq-deadline registered
  218. [ 4.907923] io scheduler kyber registered
  219. [ 4.918251] vcc5v0_host: supplied by vcc_sys
  220. [ 4.918633] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
  221. [ 4.923810] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
  222. [ 4.977111] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  223. [ 4.977192] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  224. [ 4.982061] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  225. [ 4.982134] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  226. [ 4.992858] pwm-regulator: supplied by vcc_sys
  227. [ 4.993530] vcc3v3_sys: supplied by vcc_sys
  228. [ 4.993653] vcc5v0_typec: supplied by vcc_sys
  229. [ 5.005750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  230. [ 5.011853] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  231. [ 5.013283] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  232. [ 5.128629] printk: console [ttyS2] enabled
  233. [ 5.131942] SuperH (H)SCI(F) driver initialized
  234. [ 5.133592] msm_serial: driver initialized
  235. [ 5.212326] cacheinfo: Unable to detect cache hierarchy for CPU 0
  236. [ 5.234613] brd: module loaded
  237. [ 5.250307] loop: module loaded
  238. [ 5.309231] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  239. [ 5.309876] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  240. [ 5.317466] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  241. [ 5.352001] 3 fixed-partitions partitions found on MTD device spi0.0
  242. [ 5.352630] Creating 3 MTD partitions on "spi0.0":
  243. [ 5.353093] 0x000000000000-0x0000003f8000 : "loader"
  244. [ 5.357079] 0x0000003f8000-0x000000400000 : "env"
  245. [ 5.359951] 0x0000007c0000-0x000000800000 : "vendor"
  246. [ 5.374505] libphy: Fixed MDIO Bus: probed
  247. [ 5.376699] tun: Universal TUN/TAP device driver, 1.6
  248. [ 5.389862] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  249. [ 5.390480] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  250. [ 5.391348] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  251. [ 5.391978] igb: Copyright (c) 2007-2014 Intel Corporation.
  252. [ 5.392569] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  253. [ 5.393276] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  254. [ 5.395740] sky2: driver version 1.30
  255. [ 5.400483] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  256. [ 5.401352] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
  257. [ 5.402028] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  258. [ 5.402668] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  259. [ 5.403278] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  260. [ 5.403806] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  261. [ 5.404441] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  262. [ 5.405075] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  263. [ 5.410642] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  264. [ 5.412811] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  265. [ 5.413475] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  266. [ 5.413952] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  267. [ 5.414628] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  268. [ 5.415410] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  269. [ 5.415888] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  270. [ 5.416524] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  271. [ 5.417161] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  272. [ 5.417698] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  273. [ 5.418228] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  274. [ 5.558856] libphy: stmmac: probed
  275. [ 5.559237] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  276. [ 5.560362] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  277. [ 5.567927] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  278. [ 5.568768] usbcore: registered new interface driver pegasus
  279. [ 5.569364] usbcore: registered new interface driver rtl8150
  280. [ 5.570011] usbcore: registered new interface driver r8152
  281. [ 5.570588] usbcore: registered new interface driver asix
  282. [ 5.571261] usbcore: registered new interface driver ax88179_178a
  283. [ 5.571874] usbcore: registered new interface driver cdc_ether
  284. [ 5.572467] usbcore: registered new interface driver dm9601
  285. [ 5.573042] usbcore: registered new interface driver CoreChips
  286. [ 5.573635] usbcore: registered new interface driver smsc75xx
  287. [ 5.574232] usbcore: registered new interface driver smsc95xx
  288. [ 5.574882] usbcore: registered new interface driver net1080
  289. [ 5.575462] usbcore: registered new interface driver plusb
  290. [ 5.576017] usbcore: registered new interface driver cdc_subset
  291. [ 5.576610] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  292. [ 5.577372] usbcore: registered new interface driver cdc_ncm
  293. [ 5.578502] VFIO - User Level meta-driver version: 0.3
  294. [ 5.585996] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  295. [ 5.603159] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  296. [ 5.611838] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  297. [ 5.628867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  298. [ 5.629501] ehci-pci: EHCI PCI platform driver
  299. [ 5.630042] ehci-platform: EHCI generic platform driver
  300. [ 5.633721] ehci-platform fe380000.usb: EHCI Host Controller
  301. [ 5.634279] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  302. [ 5.637616] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  303. [ 5.651003] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  304. [ 5.653226] hub 1-0:1.0: USB hub found
  305. [ 5.653619] hub 1-0:1.0: 1 port detected
  306. [ 5.657470] ehci-platform fe3c0000.usb: EHCI Host Controller
  307. [ 5.658013] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  308. [ 5.662312] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  309. [ 5.675030] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  310. [ 5.677005] hub 2-0:1.0: USB hub found
  311. [ 5.677392] hub 2-0:1.0: 1 port detected
  312. [ 5.680070] ehci-orion: EHCI orion driver
  313. [ 5.681864] ehci-exynos: EHCI EXYNOS driver
  314. [ 5.682711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  315. [ 5.683444] ohci-pci: OHCI PCI platform driver
  316. [ 5.684036] ohci-platform: OHCI generic platform driver
  317. [ 5.685077] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  318. [ 5.685715] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  319. [ 5.688712] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  320. [ 5.756340] hub 3-0:1.0: USB hub found
  321. [ 5.756755] hub 3-0:1.0: 1 port detected
  322. [ 5.758327] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  323. [ 5.759123] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  324. [ 5.761177] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  325. [ 5.824256] hub 4-0:1.0: USB hub found
  326. [ 5.824643] hub 4-0:1.0: 1 port detected
  327. [ 5.827178] ohci-exynos: OHCI EXYNOS driver
  328. [ 5.830628] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  329. [ 5.831243] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  330. [ 5.834426] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  331. [ 5.835444] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  332. [ 5.837973] hub 5-0:1.0: USB hub found
  333. [ 5.838394] hub 5-0:1.0: 1 port detected
  334. [ 5.839550] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  335. [ 5.840076] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  336. [ 5.840781] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  337. [ 5.841477] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  338. [ 5.843654] hub 6-0:1.0: USB hub found
  339. [ 5.844059] hub 6-0:1.0: 1 port detected
  340. [ 5.845486] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  341. [ 5.846011] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  342. [ 5.851981] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  343. [ 5.853016] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  344. [ 5.855778] hub 7-0:1.0: USB hub found
  345. [ 5.856172] hub 7-0:1.0: 1 port detected
  346. [ 5.857714] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  347. [ 5.858236] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  348. [ 5.859233] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  349. [ 5.859914] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  350. [ 5.861744] hub 8-0:1.0: USB hub found
  351. [ 5.862173] hub 8-0:1.0: 1 port detected
  352. [ 5.865835] usbcore: registered new interface driver usb-storage
  353. [ 5.879922] i2c /dev entries driver
  354. [ 5.891324] rk808 0-001b: chip id: 0x0
  355. [ 5.897667] rk808-regulator rk808-regulator: there is no dvs0 gpio
  356. [ 5.898297] rk808-regulator rk808-regulator: there is no dvs1 gpio
  357. [ 5.899654] DCDC_REG1: supplied by vcc_sys
  358. [ 5.901312] DCDC_REG2: supplied by vcc_sys
  359. [ 5.902256] DCDC_REG3: supplied by vcc_sys
  360. [ 5.903099] DCDC_REG4: supplied by vcc_sys
  361. [ 5.904136] LDO_REG1: supplied by vcc_sys
  362. [ 5.905806] LDO_REG2: supplied by vcc_sys
  363. [ 5.906369] vcc2v8_dvp: Bringing 3000000uV into 2800000-2800000uV
  364. [ 5.908149] LDO_REG3: supplied by vcc_sys
  365. [ 5.909697] LDO_REG4: supplied by vcc_sys
  366. [ 5.910250] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  367. [ 5.912023] LDO_REG5: supplied by vcc_sys
  368. [ 5.913408] LDO_REG6: supplied by vcc_sys
  369. [ 5.914996] LDO_REG7: supplied by vcc_sys
  370. [ 5.916377] LDO_REG8: supplied by vcc_sys
  371. [ 5.917886] SWITCH_REG1: supplied by vcc3v3_sys
  372. [ 5.918670] SWITCH_REG2: supplied by vcc3v3_sys
  373. [ 5.924690] rk808-rtc rk808-rtc: registered as rtc0
  374. [ 5.926374] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  375. [ 5.927143] fan53555-reg: supplied by vcc_sys
  376. [ 5.928944] vcc1v8_s3: supplied by vcc_1v8
  377. [ 5.930454] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  378. [ 5.931168] fan53555-reg: supplied by vcc_sys
  379. [ 5.942568] rockchip-rga ff680000.rga: HW Version: 0x03.02
  380. [ 5.958883] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  381. [ 6.002878] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
  382. [ 6.012052] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
  383. [ 6.013636] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
  384. [ 6.014497] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
  385. [ 6.015670] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
  386. [ 6.045597] Bluetooth: HCI UART driver ver 2.3
  387. [ 6.049715] cpu cpu0: Linked as a consumer to regulator.11
  388. [ 6.050565] cpu cpu0: Dropping the link to regulator.11
  389. [ 6.051656] cpu cpu0: Linked as a consumer to regulator.11
  390. [ 6.054687] cpu cpu4: Linked as a consumer to regulator.24
  391. [ 6.055888] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  392. [ 6.057963] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  393. [ 6.058885] random: fast init done
  394. [ 6.060751] sdhci: Secure Digital Host Controller Interface driver
  395. [ 6.061304] sdhci: Copyright(c) Pierre Ossman
  396. [ 6.061934] Synopsys Designware Multimedia Card Interface Driver
  397. [ 6.063540] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  398. [ 6.064498] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  399. [ 6.065103] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  400. [ 6.065659] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  401. [ 6.066610] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
  402. [ 6.067336] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  403. [ 6.067921] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  404. [ 6.081412] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  405. [ 6.097686] sdhci-pltfm: SDHCI platform and OF driver helper
  406. [ 6.100492] mmc1: CQHCI version 5.10
  407. [ 6.127046] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  408. [ 6.133557] ledtrig-cpu: registered to indicate activity on CPUs
  409. [ 6.135758] usbcore: registered new interface driver usbhid
  410. [ 6.136269] usbhid: USB HID core driver
  411. [ 6.138513] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
  412. [ 6.146702] xt_time: kernel timezone is -0000
  413. [ 6.147144] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  414. [ 6.147957] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  415. [ 6.148754] IPVS: ipvs loaded.
  416. [ 6.149030] IPVS: [rr] scheduler registered.
  417. [ 6.149408] IPVS: [wrr] scheduler registered.
  418. [ 6.149794] IPVS: [lc] scheduler registered.
  419. [ 6.150172] IPVS: [wlc] scheduler registered.
  420. [ 6.150558] IPVS: [fo] scheduler registered.
  421. [ 6.150946] IPVS: [ovf] scheduler registered.
  422. [ 6.151339] IPVS: [lblc] scheduler registered.
  423. [ 6.151736] IPVS: [lblcr] scheduler registered.
  424. [ 6.152136] IPVS: [dh] scheduler registered.
  425. [ 6.152514] IPVS: [sh] scheduler registered.
  426. [ 6.152893] IPVS: [sed] scheduler registered.
  427. [ 6.153279] IPVS: [nq] scheduler registered.
  428. [ 6.153888] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  429. [ 6.154504] Initializing XFRM netlink socket
  430. [ 6.155326] NET: Registered protocol family 10
  431. [ 6.156354] Segment Routing with IPv6
  432. [ 6.156921] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  433. [ 6.157849] NET: Registered protocol family 17
  434. [ 6.158281] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  435. [ 6.159538] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  436. [ 6.160066] Bluetooth: HIDP socket layer initialized
  437. [ 6.160538] 8021q: 802.1Q VLAN Support v1.8
  438. [ 6.161015] 9pnet: Installing 9P2000 support
  439. [ 6.161441] Key type dns_resolver registered
  440. [ 6.162618] registered taskstats version 1
  441. [ 6.163851] Btrfs loaded, crc32c=crc32c-generic
  442. [ 6.174269] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  443. [ 6.184236] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  444. [ 6.186891] rk808-rtc rk808-rtc: setting system clock to 2019-02-01 14:20:32 UTC (1549030832)
  445. [ 6.187658] of_cfs_init
  446. [ 6.187907] of_cfs_init: OK
  447. [ 6.188374] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  448. [ 6.189134] cfg80211: failed to load regulatory.db
  449. [ 6.190072] vcc3v3_pcie: disabling
  450. [ 6.190398] ALSA device list:
  451. [ 6.190662] No soundcards found.
  452. [ 6.191308] ttyS2 - failed to request DMA
  453. [ 6.192128] Freeing unused kernel memory: 1536K
  454. [ 6.215760] Run /init as init process
  455. [ 6.333329] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 238
  456. [ 6.334019] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  457. [ 6.336599] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  458. [ 6.344997] GPT:Primary header thinks Alt. header is not at the end of the disk.
  459. [ 6.345683] GPT:60620799 != 62333951
  460. [ 6.346006] GPT:Alternate GPT header not at the end of the disk.
  461. [ 6.346542] GPT:60620799 != 62333951
  462. [ 6.346887] GPT: Use GNU Parted to correct GPT errors.
  463. [ 6.347393] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  464. [ 6.563792] iommu: Adding device ff8f0000.vop to group 0
  465. [ 6.564434] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  466. [ 6.566291] iommu: Adding device ff900000.vop to group 1
  467. [ 6.567104] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  468. [ 6.572790] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  469. [ 6.573484] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  470. [ 6.574656] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  471. [ 6.578211] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  472. [ 6.580874] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  473. [ 6.581895] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  474. [ 6.592774] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  475. [ 6.594039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  476. [ 6.594645] [drm] No driver support for vblank timestamp query.
  477. [ 6.595287] [drm] Cannot find any crtc or sizes
  478. [ 6.596486] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  479. [ 7.607200] [drm] Cannot find any crtc or sizes
  480. [ 8.055389] async_tx: api initialized (async)
  481. [ 8.483066] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  482. [ 8.876286] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  483. [ 8.878680] systemd[1]: Detected architecture arm64.
  484. [ 8.902181] systemd[1]: Set hostname to <rockpro64v_2_1>.
  485. [ 9.177580] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  486. [ 9.179119] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  487. [ 9.355116] random: systemd: uninitialized urandom read (16 bytes read)
  488. [ 9.356064] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  489. [ 9.367128] random: systemd: uninitialized urandom read (16 bytes read)
  490. [ 9.367807] systemd[1]: Reached target System Time Synchronized.
  491. [ 9.379208] random: systemd: uninitialized urandom read (16 bytes read)
  492. [ 9.380093] systemd[1]: Started ntp-systemd-netif.path.
  493. [ 9.392367] systemd[1]: Created slice User and Session Slice.
  494. [ 9.404353] systemd[1]: Created slice System Slice.
  495. [ 10.142071] systemd-journald[2505]: Received request to flush runtime journal from PID 1
  496. [ 10.454715] random: crng init done
  497. [ 10.454726] random: 7 urandom warning(s) missed due to ratelimiting
  498. [ 10.683569] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  499. [ 10.683643] rockchip-pcie f8000000.pcie: Linked as a consumer to regulator.3
  500. [ 10.683687] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  501. [ 10.683721] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  502. [ 10.721737] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  503. [ 10.722638] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  504. [ 10.723280] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl
  505. [ 10.724286] es8316 1-0010: Error applying setting, reverse things back
  506. [ 10.724892] es8316: probe of 1-0010 failed with error -22
  507. [ 10.762988] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  508. [ 10.763015] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  509. [ 10.763023] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  510. [ 10.763294] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  511. [ 10.763303] pci_bus 0000:00: root bus resource [bus 00-1f]
  512. [ 10.763308] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  513. [ 10.763313] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  514. [ 10.763342] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  515. [ 10.763430] pci 0000:00:00.0: supports D1
  516. [ 10.763434] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  517. [ 10.769198] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  518. [ 10.769442] pci 0000:01:00.0: [1b4b:9230] type 00 class 0x010601
  519. [ 10.769534] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00008000 invalid
  520. [ 10.769541] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  521. [ 10.769575] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00008040 invalid
  522. [ 10.769579] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  523. [ 10.769612] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00008100 invalid
  524. [ 10.769616] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  525. [ 10.769650] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00008140 invalid
  526. [ 10.769654] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  527. [ 10.769688] pci 0000:01:00.0: reg 0x20: [io 0x800000-0x80001f]
  528. [ 10.769722] pci 0000:01:00.0: reg 0x24: [mem 0x00900000-0x009007ff]
  529. [ 10.769757] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref]
  530. [ 10.769788] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  531. [ 10.769812] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
  532. [ 10.769984] pci 0000:01:00.0: PME# supported from D3hot
  533. [ 10.773842] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  534. [ 10.773908] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  535. [ 10.773926] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  536. [ 10.773931] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0107ff]
  537. [ 10.773991] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  538. [ 10.773995] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  539. [ 10.774000] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  540. [ 10.774044] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  541. [ 10.774048] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  542. [ 10.774052] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  543. [ 10.774056] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  544. [ 10.774060] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  545. [ 10.774064] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  546. [ 10.774068] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  547. [ 10.774076] pci 0000:00:00.0: PCI bridge to [bus 01]
  548. [ 10.774084] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  549. [ 10.774473] ahci 0000:01:00.0: version 3.0
  550. [ 10.774492] pci 0000:00:00.0: enabling device (0000 -> 0002)
  551. [ 10.774615] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
  552. [ 10.833749] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  553. [ 10.835628] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  554. [ 10.835641] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  555. [ 10.835837] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  556. [ 10.938879] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  557. [ 11.777759] ahci 0000:01:00.0: controller reset failed (0x80000001)
  558. [ 11.778466] ahci: probe of 0000:01:00.0 failed with error -5
  559. [ 11.800655] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
  560. [ 11.867557] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  561. [ 11.867582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  562. [ 12.082957] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
  563. [ 12.082963] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
  564. [ 12.085140] scsi host0: ahci
  565. [ 12.085492] scsi host1: ahci
  566. [ 12.089787] scsi host2: ahci
  567. [ 12.094170] scsi host3: ahci
  568. [ 12.095837] scsi host4: ahci
  569. [ 12.096412] scsi host5: ahci
  570. [ 12.096786] scsi host6: ahci
  571. [ 12.097141] scsi host7: ahci
  572. [ 12.097310] ata1: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010100 irq 231
  573. [ 12.097316] ata2: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010180 irq 231
  574. [ 12.097321] ata3: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010200 irq 231
  575. [ 12.097326] ata4: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010280 irq 231
  576. [ 12.097330] ata5: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010300 irq 231
  577. [ 12.097335] ata6: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010380 irq 231
  578. [ 12.097340] ata7: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010400 irq 231
  579. [ 12.097344] ata8: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010480 irq 231
  580. [ 12.454910] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
  581. [ 12.774117] NFSD: starting 45-second grace period (net f00000a1)
  582. [ 13.563184] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  583. [ 13.606700] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  584. [ 13.606720] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  585. [ 13.611110] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  586. [ 13.615026] ata4: SATA link down (SStatus 0 SControl 300)
  587. [ 13.615110] ata5: SATA link down (SStatus 0 SControl 300)
  588. [ 13.619204] ata6: SATA link down (SStatus 0 SControl 300)
  589. [ 13.623050] ata2: SATA link down (SStatus 0 SControl 300)
  590. [ 13.627042] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  591. [ 13.627321] ata8.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
  592. [ 13.628136] ata8.00: configured for UDMA/66
  593. [ 13.630933] ata7: SATA link down (SStatus 0 SControl 300)
  594. [ 13.651607] ata3.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  595. [ 13.651626] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  596. [ 13.657303] ata1.00: configured for UDMA/133
  597. [ 13.658377] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  598. [ 13.661240] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  599. [ 13.661261] sd 0:0:0:0: [sda] 4096-byte physical blocks
  600. [ 13.661365] sd 0:0:0:0: [sda] Write Protect is off
  601. [ 13.661381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  602. [ 13.661552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  603. [ 13.701700] ata3.00: configured for UDMA/133
  604. [ 13.702130] scsi 2:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  605. [ 13.702891] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  606. [ 13.702900] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  607. [ 13.702940] sd 2:0:0:0: [sdb] Write Protect is off
  608. [ 13.702949] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  609. [ 13.703002] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  610. [ 13.705366] scsi 7:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
  611. [ 13.740105] sda: sda1
  612. [ 13.741253] sd 0:0:0:0: [sda] Attached SCSI disk
  613. [ 13.771056] sdb: sdb1
  614. [ 13.772333] sd 2:0:0:0: [sdb] Attached SCSI disk
  615. [ 42.360451] device-mapper: uevent: version 1.0.3
  616. [ 42.360702] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  617. [ 239.780519] md/raid1:md0: active with 2 out of 2 mirrors
  618. [ 239.812528] md0: detected capacity change from 0 to 2000260497408
  619. [ 240.271182] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!