rock3 dts:
&sdhci {
        bus-width = <8>;
        max-frequency = <200000000>;
        non-removable;
        pinctrl-names = "default";
        pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
        vmmc-supply = <&vcc_3v3>;
        vqmmc-supply = <&vcc_1v8>;
        status = "okay";
};

&sdmmc0 {
        bus-width = <4>;
        cap-sd-highspeed;
        cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
        disable-wp;
        pinctrl-names = "default";
        pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
        sd-uhs-sdr50;
        vmmc-supply = <&vcc3v3_sd>;
        vqmmc-supply = <&vccio_sd>;
        status = "okay";
};

&sdmmc2 {
        bus-width = <4>;
        disable-wp;
        cap-sd-highspeed;
        cap-sdio-irq;
        keep-power-in-suspend;
        mmc-pwrseq = <&sdio_pwrseq>;
        non-removable;
        pinctrl-names = "default";
        pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
        sd-uhs-sdr104;
        vmmc-supply = <&vcc3v3_sys>;
        vqmmc-supply = <&vcc_1v8>;
        status = "okay";
};

radxa-e25 dts:
aliases {
                mmc1 = &sdmmc0;
        };

&sdmmc0 {
        bus-width = <4>;
        cap-sd-highspeed;
        cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
        /* Also used in pcie30x1_clkreqnm0 */
        disable-wp;
        pinctrl-names = "default";
        pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
        sd-uhs-sdr104;
        vmmc-supply = <&vcc3v3_sd>;
        vqmmc-supply = <&vccio_sd>;
        status = "okay";
};


cm3i dtsi:

        aliases {
                mmc0 = &sdhci;
        };

&sdhci {
        bus-width = <8>;
        max-frequency = <200000000>;
        non-removable;
        pinctrl-names = "default";
        pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
        vmmc-supply = <&vcc_3v3>;
        vqmmc-supply = <&vcc_1v8>;
        status = "okay";
};