2020-01-19 22:02:24 ★ Marcus Wilburn slips a pair of gloves on his hands and pops the trunk open before taking out
2020-01-19 22:02:51 ★ the scissor jack that came with the car, he makes his way to the front left side and kneels      ((Marcus Wilburn))
2020-01-19 22:03:10 ★ down, sliding the jack under the pinch weld, turning the handle to lift that side of the car      ((Marcus Wilburn))
2020-01-19 22:03:12 ★ up.      ((Marcus Wilburn))
2020-01-19 22:03:53 ★ Marcus Wilburn reaches out for the socket wrench and fits it with the appropriate socket as he loosens the
2020-01-19 22:03:58 ★ wheel bolts.      ((Marcus Wilburn))
2020-01-19 22:04:17 ★ Marcus Wilburn puts the wrench aside and pulls the front left wheel out of place as he places it aside.
2020-01-19 22:04:53 ★ Marcus Wilburn fits the wrench with the right socket and starts undoing the nuts of the lower bracket
2020-01-19 22:05:27 ★ securing it to the lower control arm.      ((Marcus Wilburn))
2020-01-19 22:05:56 ★ Marcus Wilburn puts the nuts aside and pushes himself up as he opens the driver door and pulls the
2020-01-19 22:06:02 ★ hood release handle.      ((Marcus Wilburn))
2020-01-19 22:06:30 ★ Marcus Wilburn refits his wrench with the right socket and starts undoing the bolts securing the shock
2020-01-19 22:06:47 ★ absorber to the strut tower.      ((Marcus Wilburn))
2020-01-19 22:07:40 ★ Marcus Wilburn loosens them completely slow, he's aware that they're compressed.
2020-01-19 22:08:52 ★ Marcus Wilburn kneels down and eases the shock assembly out of place, putting it aside.
2020-01-19 22:09:12 ★ Marcus Wilburn takes a coilover out of the box and fits it in place before taking the nuts that came
2020-01-19 22:09:37 ★ with it and hand fitting them before fully tightening them using the wrench in order      ((Marcus Wilburn))
2020-01-19 22:10:07 ★ to secure the coilover to the lower control arm.      ((Marcus Wilburn))
2020-01-20 00:26:53 ★ Marcus Wilburn pushes himself up and places the nuts on the coilover studs that went through the
2020-01-20 00:27:10 ★ OEM holes of the strut tower, he uses the wrench to tighten them down.      ((Marcus Wilburn))
2020-01-20 00:27:57 ★ Marcus Wilburn keeps the car jacked up he grabs a new 16" rim and places it down before
2020-01-20 00:28:30 ★ taking a tire of the same size and placing it directly above the rim.      ((Marcus Wilburn))
2020-01-20 00:29:01 ★ Marcus Wilburn reaches out for the tire iron and wedges it between the bead of the tire and the rim as he
2020-01-20 00:29:12 ★ uses his knees to push the tire down onto the rim.      ((Marcus Wilburn))
2020-01-20 00:31:44 ★ Marcus Wilburn upturns the wheel and slips the end of the tire iron between the bead and the wheel
2020-01-20 00:31:59 ★ he then pushes away to pry the bead and fit it on the rim.      ((Marcus Wilburn))
2020-01-20 00:33:02 ★ Marcus Wilburn eases the edges by pushing the tire using his palms.
2020-01-20 00:33:30 ★ Marcus Wilburn grabs the wheel and puts it in place before using the socket to tighten the bolts and
2020-01-20 00:33:34 ★ secure it in place.      ((Marcus Wilburn))
2020-01-20 00:34:09 ★ Marcus Wilburn grabs the hose of the air compressor and undoes the cap of the air valve before pulling
2020-01-20 00:34:30 ★ on the handle near the end of the hose to fill the tire with air until the machine beeps.      ((Marcus Wilburn))
2020-01-20 00:34:48 ★ Marcus Wilburn puts the cover back on the valve and tosses the hose away before grabbing the handle
2020-01-20 00:35:02 ★ of the scissor jack and turning to lower the car down.      ((Marcus Wilburn))
2020-01-20 00:35:45 ★ Marcus Wilburn goes to the front right side and takes a knee as he puts the jack beneath the pinch weld
2020-01-20 00:35:54 ★ and lifting the car up.      ((Marcus Wilburn))
2020-01-20 00:36:40 ★ Marcus Wilburn uses the tire iron to unscrew the right front wheel bolts prior to taking the wheel off.
2020-01-20 00:37:47 ★ Marcus Wilburn uses the ratchet to undo the bolts securing the shock's lower bracket to the lower
2020-01-20 00:37:50 ★ control arm.      ((Marcus Wilburn))
2020-01-20 00:39:20 ★ Marcus Wilburn pushes himself up and loosens the nuts securing the shock assembly to the strut tower.
2020-01-20 00:39:41 ★ Marcus Wilburn gives them some time to partially decompress before completely loosening them.
2020-01-20 00:40:10 ★ Marcus Wilburn eases the shock assembly out of place and grabs a coilover putting it in place instead
2020-01-20 00:40:45 ★ and hand tightening the bolts to temporarily secure it.      ((Marcus Wilburn))
2020-01-20 00:41:18 ★ Marcus Wilburn grabs the ratchet and fits it with the right size socket before fastening the bolts that
2020-01-20 00:41:30 ★ secure the coilover to the lower control arm.      ((Marcus Wilburn))
2020-01-20 00:42:02 ★ Marcus Wilburn stands up and tightens the nuts that mount the coilover to the strut tower.
2020-01-20 00:42:29 ★ Marcus Wilburn grabs a new 16" rim and places it down before resting a tire of the same size above it
2020-01-20 00:42:44 ★ and using some grease to lubricate the bead.      ((Marcus Wilburn))
2020-01-20 00:43:08 ★ Marcus Wilburn places the lubricated side of the tire directly against the rim and applies pressure on the
2020-01-20 00:44:03 ★ tire with his knees while simultaneously using the tire iron in order to pry the tire      ((Marcus Wilburn))
2020-01-20 00:44:10 ★ onto the rim.      ((Marcus Wilburn))
2020-01-20 00:46:15 ★ Marcus Wilburn turns over the wheel and applies some grease to the side facing him of the tire's bead.
2020-01-20 00:46:44 ★ Marcus Wilburn wedges the tire tool between the rim and the rubber and pries it to fit the tire on the rim
2020-01-20 00:47:28 ★ before making his way around in a circle in order to perfectly mount the tire.      ((Marcus Wilburn))
2020-01-20 00:48:01 ★ Marcus Wilburn grabs the fully assembled wheel and puts it in place as he slides a bolt in one of the
2020-01-20 00:48:10 ★ holes to momentarily fix it.      ((Marcus Wilburn))
2020-01-20 00:48:36 ★ Marcus Wilburn would then insert the rest of the bolts and use the tire iron to tighten the bolts.
2020-01-20 00:49:14 ★ Marcus Wilburn takes off the valve's cap and fits the end of the hose from the air compressor on it
2020-01-20 00:49:29 ★ and squeezing the handle to fill the tire with air until the machine beeps.      ((Marcus Wilburn))
2020-01-20 00:50:13 ★ Marcus Wilburn puts the hose aside and lowers the front right side of the wheel, moving the jack to
2020-01-20 00:50:19 ★ the right rear side.      ((Marcus Wilburn))
2020-01-20 00:53:14 ★ Marcus Wilburn raises the said side of the car and loosens the wheel bolts using the tire tool.
2020-01-20 00:53:35 ★ Marcus Wilburn pulls the wheel out of place and places it aside along with the tire tool.
2020-01-20 00:53:50 ★ Marcus Wilburn grabs the ratchet and exhales deeply before assesing the situation.
2020-01-20 00:54:01  [English] Marcus Wilburn says: Fucking wishbones mane.
2020-01-20 00:54:47 ★ Marcus Wilburn uses the ratchet in his hand to loosen the nut and bolt securing the lower end of the
2020-01-20 00:55:59 ★ shock/strut assembly.      ((Marcus Wilburn))
2020-01-20 00:57:39 ★ Marcus Wilburn grabs a pair of vise grips and uses them to keep the spring compressed.
2020-01-20 00:57:55 ★ Marcus Wilburn opens the trunk and moves the carpet aside to reveal the upper side of the suspension.
2020-01-20 00:58:22 ★ Marcus Wilburn uses the ratchet to undo the bolts securing the upper side of the shock/strut assembly.
2020-01-20 00:58:48 ★ Marcus Wilburn grabs the vise grip's handle and eases the shock assembly out of place.
2020-01-20 00:59:02 ★ Marcus Wilburn places it aside and grabs a brand new coilover as he puts it in place before hand
2020-01-20 00:59:24 ★ tightening the bolt and nut on the bottom.      ((Marcus Wilburn))
2020-01-20 00:59:58 ★ Marcus Wilburn scoops the ratchet and tightens the said nut before pushing himself up and moving
2020-01-20 01:00:36 ★ to the trunk in order to secure the upper side of the coilover.      ((Marcus Wilburn))
2020-01-20 01:01:05 ★ Marcus Wilburn swiftly retrives a new rim and a tire, placing the rim on the ground with the tire on it
2020-01-20 01:01:14 ★ prior to lubricating the bead with grease.      ((Marcus Wilburn))
2020-01-20 01:01:56 ★ Marcus Wilburn applies pressure on the tire as he uses the tire tool to pry the bead onto the rim.
2020-01-20 01:02:24 ★ Marcus Wilburn fits one side of the tire, he wedges the tire iron between the other side of the tire and
2020-01-20 01:02:49 ★ the rim before pushing away to perfectly assemble them together, lubricating if necessary.      ((Marcus Wilburn))
2020-01-20 01:03:38 ★ Marcus Wilburn puts the wheel in place and uses the tire tool to secure the wheel in place.
2020-01-20 01:04:00 ★ Marcus Wilburn takes off the cap of the valve and fits the air compressor's hose on the valve in order
2020-01-20 01:04:23 ★ to fill the tire with air until the machine signals the tire is good to go by beeping.      ((Marcus Wilburn))
2020-01-20 01:04:55 ★ Marcus Wilburn lowers the rear right end of the car and moves to the left rear side as he lifts that
2020-01-20 01:05:23 ★ side with the jack, he unscrews the bolts on the wheel and takes it off.      ((Marcus Wilburn))
2020-01-20 01:05:47 ★ Marcus Wilburn repeats exactly the same procedure by loosening the nut securing the bottom side of
2020-01-20 01:06:17 ★ the strut/shock assembly, he uses the vise grip to keep the spring compressed to      ((Marcus Wilburn))
2020-01-20 01:06:21 ★ avoid accidents.      ((Marcus Wilburn))
2020-01-20 01:06:49 ★ Marcus Wilburn moves to the trunk and undoes the nuts securing the shock/strut assembly, he
2020-01-20 01:07:06 ★ then eases the strut/shock assembly out of place as he exhales deeply.      ((Marcus Wilburn))
2020-01-20 01:07:26 ★ Marcus Wilburn places it aside along with the vise grib and grabs the last coilover remaining in the
2020-01-20 01:08:10 ★ box, he fits it in place and secures the nut in the bottom.      ((Marcus Wilburn))
2020-01-20 01:08:41 ★ Marcus Wilburn uses the ratchet to tighten the nuts mounting the newly fitted coilover to the car's frame
2020-01-20 01:08:45 ★ from the trunk.      ((Marcus Wilburn))
2020-01-20 01:09:11 ★ Marcus Wilburn grabs the last tire and lubricates the bead with grease as he mans the tire tool and uses
2020-01-20 01:09:30 ★ it to pry the side of the tire onto the rim, applying pressure for a direct fit.      ((Marcus Wilburn))
2020-01-20 01:09:47 ★ Marcus Wilburn upturns the wheel and inserts the end of the tire iron between the rubber and the
2020-01-20 01:09:57 ★ rim, prying away to fit that side as well.      ((Marcus Wilburn))
2020-01-20 01:10:16 ★ Marcus Wilburn fits the wheel on the car and fixes it in place by tightening the bolts, he then grabs
2020-01-20 01:10:26 ★ the air compressor hose and fills the tire with air.      ((Marcus Wilburn))
2020-01-20 01:10:44 ★ Marcus Wilburn lowers the rear left side of the car back on the ground as he wipes the sweat off of his
2020-01-20 01:10:47 ★ forehead.      ((Marcus Wilburn))