Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- IO 0x1d06000 (irq = 41) is a 16550A
- [ 0.680000] brd: module loaded
- [ 0.690000] NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
- [ 0.700000] Creating 4 MTD partitions on "davinci_nand.0":
- [ 0.700000] 0x000000000000-0x0000004a0000 : "bootloader"
- [ 0.710000] 0x0000004a0000-0x000000e00000 : "kernel"
- [ 0.720000] 0x000000e00000-0x000007f00000 : "filesystem"
- [ 0.730000] 0x000000000000-0x000008000000 : "all"
- [ 0.740000] davinci_nand davinci_nand.0: controller rev. 2.3
- [ 0.750000] UBI: attaching mtd2 to ubi0
- [ 0.750000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- [ 0.760000] UBI: logical eraseblock size: 126976 bytes
- [ 0.770000] UBI: smallest flash I/O unit: 2048
- [ 0.770000] UBI: sub-page size: 512
- [ 0.780000] UBI: VID header offset: 2048 (aligned 2048)
- [ 0.780000] UBI: data offset: 4096
- [ 1.300000] UBI: attached mtd2 to ubi0
- [ 1.310000] UBI: MTD device name: "filesystem"
- [ 1.310000] UBI: MTD device size: 113 MiB
- [ 1.320000] UBI: number of good PEBs: 903
- [ 1.320000] UBI: number of bad PEBs: 1
- [ 1.320000] UBI: max. allowed volumes: 128
- [ 1.330000] UBI: wear-leveling threshold: 4096
- [ 1.330000] UBI: number of internal volumes: 1
- [ 1.340000] UBI: number of user volumes: 1
- [ 1.340000] UBI: available PEBs: 0
- [ 1.350000] UBI: total number of reserved PEBs: 903
- [ 1.350000] UBI: number of PEBs reserved for bad PEB handling: 9
- [ 1.360000] UBI: max/mean erase counter: 23/5
- [ 1.360000] UBI: image sequence number: 70871224
- [ 1.370000] UBI: background thread "ubi_bgt0d" started, PID 323
- [ 1.380000] usbcore: registered new interface driver asix
- [ 1.380000] usbcore: registered new interface driver cdc_ether
- [ 1.390000] usbcore: registered new interface driver net1080
- [ 1.400000] usbcore: registered new interface driver cdc_subset
- [ 1.400000] usbcore: registered new interface driver zaurus
- [ 1.410000] console [netcon0] enabled
- [ 1.410000] netconsole: network logging started
- [ 1.420000] Initializing USB Mass Storage driver...
- [ 1.420000] usbcore: registered new interface driver usb-storage
- [ 1.430000] USB Mass Storage support registered.
- [ 1.440000] i2c /dev entries driver
- [ 1.440000] Linux video capture interface: v2.00
- [ 2.460000] i2c_davinci i2c_davinci.1: timeout when try recovery i2c bus
- [ 2.460000] i2c_davinci i2c_davinci.1: timeout waiting for bus ready
- [ 3.480000] i2c_davinci i2c_davinci.1: timeout when try recovery i2c bus
- [ 3.480000] i2c_davinci i2c_davinci.1: timeout waiting for bus ready
- [ 4.500000] i2c_davinci i2c_davinci.1: timeout when try recovery i2c bus
- [ 4.500000] i2c_davinci i2c_davinci.1: timeout waiting for bus ready
- [ 4.510000] vpfe-capture: vpss clock vpss_master enabled
- [ 4.510000] vpfe-capture vpfe-capture: v4l2 device registered
- [ 4.520000] vpfe-capture vpfe-capture: video device registered
- [ 4.530000] EVM: switch to ambarella video input
- [ 4.530000] vpfe-capture vpfe-capture: v4l2 sub device ambarella registered
- [ 4.540000] vpfe_register_ccdc_device: DM365 ISIF
- [ 4.550000] DM365 ISIF is registered with vpfe.
- [ 4.550000] Trying to register davinci display video device.
- [ 4.560000] layer=c1059c00,layer->video_dev=c1059d64
- [ 4.560000] Trying to register davinci display video device.
- [ 4.570000] layer=c1152000,layer->video_dev=c1152164
- [ 4.580000] davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
- [ 4.580000] watchdog watchdog: heartbeat 1 sec
- [ 4.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.600000] arp_tables: (C) 2002 David S. Miller
- [ 4.600000] TCP cubic registered
- [ 4.600000] NET: Registered protocol family 17
- [ 4.610000] Bridge firewalling registered
- [ 4.640000] Clocks: disable unused mmcsd0
- [ 4.640000] Clocks: disable unused mmcsd1
- [ 4.640000] Clocks: disable unused spi0
- [ 4.640000] Clocks: disable unused spi1
- [ 4.640000] Clocks: disable unused spi2
- [ 4.640000] Clocks: disable unused spi3
- [ 4.640000] Clocks: disable unused spi4
- [ 4.640000] Clocks: disable unused pwm0
- [ 4.640000] Clocks: disable unused pwm1
- [ 4.640000] Clocks: disable unused pwm2
- [ 4.640000] Clocks: disable unused pwm3
- [ 4.640000] Clocks: disable unused timer1
- [ 4.640000] Clocks: disable unused timer3
- [ 4.640000] Clocks: disable unused emac
- [ 4.640000] Clocks: disable unused voice_codec
- [ 4.640000] Clocks: disable unused asp0
- [ 4.640000] Clocks: disable unused rto
- [ 4.640000] Clocks: disable unused mjcp
- [ 4.720000] nnnn===0
- [ 4.720000] davinci_emac_probe: using random MAC addr: 96:da:18:6b:72:88
- [ 4.730000] emac-mii: probed
- [ 4.770000] UBIFS: recovery needed
- [ 4.820000] UBIFS: recovery completed
- [ 4.830000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 4.830000] UBIFS: file system size: 110342144 bytes (107756 KiB, 105 MiB, 869 LEBs)
- [ 4.840000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
- [ 4.850000] UBIFS: media format: w4/r0 (latest is w4/r0)
- [ 4.850000] UBIFS: default compressor: lzo
- [ 4.860000] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 4.860000] VFS: Mounted root (ubifs filesystem) on device 0:13.
- [ 4.870000] Freeing init memory: 120K
- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>WM610<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
- Filesystem Product Vesion : DJI-WM610-Filesystem-1.0-rc3(2014-06-06)
- Runing /etc/init.d/rcS
- [ 7.020000] CMEMK module: built on Jan 13 2015 at 19:24:09
- [ 7.040000] Reference Linux version 2.6.32
- [ 7.040000] File /home/DJI2/Project/enc_nohdmi_wm610/src/dvsdk/dvsdk_dm368_4_02_00_06/linuxutils_2_26_01_02/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
- [ 7.060000] allocated heap buffer 0xc7000000 of size 0x2456000
- [ 7.090000] heap fallback enabled - will try heap if pool buffer is not available
- [ 7.090000] CMEM Range Overlaps Kernel Physical - allowing overlap
- [ 7.120000] CMEM phys_start (0x1000) overlaps kernel (0x80000000 -> 0x83000000)
- [ 7.120000] cmemk initialized
- [ 7.160000] IRQK module: built on Jan 13 2015 at 19:23:41
- [ 7.180000] Reference Linux version 2.6.32
- [ 7.180000] File /home/DJI2/Project/enc_nohdmi_wm610/src/dvsdk/dvsdk_dm368_4_02_00_06/linuxutils_2_26_01_02/packages/ti/sdo/linuxutils/irq/src/module/irqk.c
- [ 7.200000] irqk initialized
- [ 7.270000] EDMAK module: built on Jan 13 2015 at 19:23:04
- [ 7.290000] Reference Linux version 2.6.32
- [ 7.290000] File /home/DJI2/Project/enc_nohdmi_wm610/src/dvsdk/dvsdk_dm368_4_02_00_06/linuxutils_2_26_01_02/packages/ti/sdo/linuxutils/edma/src/module/edmak.c
- [ 7.430000] usbcore: registered new interface driver usb_68013
- [ 7.430000] usb 68013 module init ok
- sulogin: no password entry for root
- login[436]: root login on 'ttyS0'#Process /etc/profile...
- root@Dji-Pro:~# encode_usb V00.02.02.00(Nov 3 2015 11:23:52).
- Entry Encrypt qury mode
- Init libusb faild!
- Auto to detect v[ 9.820000] EVM: switch to ambarella video input
- ideo input type:
- Default video input selected:Hdmi_yuv
- Setting video standard to: 0x100000000000000
- Capture input set to Hdmi_yuv:11
- [ 9.840000] davinci_resizer davinci_resizer.2: RSZ_G_CONFIG:0:1:124
- [ 9.850000] davinci_previewer davinci_previewer.2: ipipe_set_preview_config
- [ 9.850000] vpfe-capture vpfe-capture: IPIPE Chained
- [ 9.860000] vpfe-capture vpfe-capture: Resizer present
- Capture videoStd[ 9.870000] EVM: switch to ambarella video input
- Old=0000000b
- [ 9.870000] vpfe-capture vpfe-capture: width = 1280, height = 720, bpp = 1
- [ 9.880000] vpfe-capture vpfe-capture: adjusted width = 1280, height = 720, bpp = 1, bytesperline = 1280, sizeimage = 1382400
- [ 9.890000] vpfe-capture vpfe-capture: width = 1280, height = 720, bpp = 1
- [ 9.900000] vpfe-capture vpfe-capture: adjusted width = 1280, height = 720, bpp = 1, bytesperline = 1280, sizeimage = 1382400
- videoFrameRate=30000, width=1280, height=720
- Venc1.c : minNumOutBufs 2, minOutBufSize[0] 1382400, minOutBufSize[1] 800
- GOP interval:30, outBufSize:1382400, enAdpBW:1, airRate=0, slice=6, VUI=4,timeScale=60001
- osdThrFxn: process ID is 441 ***********
- watchdog timeout:5
- ctrlThrFxn: process ID is 433 ***********
- Frmae:1 Pslice = 0, Islice = 8[44ms]
- GetFPGAstatus err!
- FPGA[1,0,1,0]-1.000000:0
- hdmi status is 1
- usblink status check~~~~~~~~~~~~~~~~
- GetFPGAstatus err!!
- inptVD=0547
- No USB device ID:547
- try reset 68013....!
- ARM Load: 62% Video fps: 5 fps Video bit rate: 0 kbps PHY Bandwidth: 0 kbps Time: 00:00:02 Resolution: 1280x720
- GetFPGAstatus err!
- FPGA[1,0,1,0]-1.000000:0
- hdmi status is 1
- ARM Load: 3% Video fps: 0 fps Video bit rate: 0 kbps PHY Bandwidth: 0 kbps Time: 00:00:04 Resolution: 1280x720
- GetFPGAstatus err!
- FPGA[1,0,1,0]-1.000000:0
- hdmi status is 1
- video lost
- libusb send error--1
- ARM Load: 2% Video fps: 1 fps Video bit rate: 0 kbps PHY Bandwidth: 0 kbps Time: 00:00:05 Resolution: 1280x720
- GetFPGAstatus err!
- FPGA[1,0,1,0]-1.000000:0
- hdmi status is 1
- usblink status check~~~~~~~~~~~~~~~~
- GetFPGAstatus err!!
- inptVD=0547
- No USB device ID:547
- try reset 68013....!
- ARM Load: 4% Video fps: 7 fps Video bit rate: 0 kbps PHY Bandwidth: 0 kbps Time: 00:00:06 Resolution: 1280x720
- GetFPGAstatus err!
- FPGA[1,0,1,0]-1.000000:0
- hdmi status is 1
- usblink status check~~~~~~~~~~~~~~~~
- GetFPGAstatus err!!
- inptVD=0547
- No USB device ID:547
- try reset 68013....!
- ARM Load: 8% Video fps: 7 fps Video bit rate: 0 kbps PHY Bandwidth: 0 kbps Time: 00:00:08 Resolution: 1280x720
- umount: can't remount none read-only
- umount: mdev busy - remounted read-only
- The system is going down NOW!
- Sent SIGTERM to all processes
- Sent SIGKILL to all processes
- Requesting system reboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement