API tools faq
paste
Guest User

Untitled

a guest
Oct 30th, 2024
46
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.05 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 6.12.0-rc4 (pmos@mighty) (armv7-alpine-linux-musleabihf-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #1 SMP Tue Oct 29 15:12:10 UTC 2024
  3. [ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt: Machine model: Samsung Galaxy Tab 2 (7 inch)
  6. [ 0.000000] Memory policy: Data cache writealloc
  7. [ 0.000000] OF: reserved mem: 0xa0000000..0xa01fffff (2048 KiB) nomap non-reusable ramoops_region@A0000000
  8. [ 0.000000] OF: reserved mem: 0xbef00000..0xbf157fff (2400 KiB) nomap non-reusable framebuffer@bef00000
  9. [ 0.000000] cma: Reserved 16 MiB at 0xbd800000 on node -1
  10. [ 0.000000] OMAP4: Map 0xb5e00000 to (ptrval) for dram barrier
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000080000000-0x00000000b5dfffff]
  13. [ 0.000000] HighMem [mem 0x00000000b5e00000-0x00000000bfffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff]
  17. [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000a01fffff]
  18. [ 0.000000] node 0: [mem 0x00000000a0200000-0x00000000b5dfffff]
  19. [ 0.000000] node 0: [mem 0x00000000b6000000-0x00000000beefffff]
  20. [ 0.000000] node 0: [mem 0x00000000bef00000-0x00000000bf157fff]
  21. [ 0.000000] node 0: [mem 0x00000000bf158000-0x00000000bfffffff]
  22. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
  23. [ 0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges
  24. [ 0.000000] OMAP4430 ES2.3
  25. [ 0.000000] percpu: Embedded 17 pages/cpu s40460 r8192 d20980 u69632
  26. [ 0.000000] pcpu-alloc: s40460 r8192 d20980 u69632 alloc=17*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootdelay=2 init=/init vram=15M omapfb.vram=0:8M switch_sel=1 androidboot.emmc_checksum=3 sec_debug.enable=1 sec_debug.enable_user=0 androidboot.debug_level=0x494d mem=512M@0x80000000 mem=512M@0xa0000000 vmalloc=144m console=sec_log_buf loglevel=0 androidboot.mode=reboot_normal bootmode=0 sec_log=2052K@0x9fdff000 sec_bootfb=8M@0xbef00000 lcd_panel_id=2 androidboot.serialno=c16077708b91c5f cordon=38e462ea33d9cefc605244fcfb64770b
  29. [ 0.000000] Unknown kernel command line parameters "vram=15M switch_sel=1 bootmode=0 sec_log=2052K@0x9fdff000 sec_bootfb=8M@0xbef00000 lcd_panel_id=2 cordon=38e462ea33d9cefc605244fcfb64770b", will be passed to user space.
  30. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  31. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  32. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261632
  33. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  35. [ 0.000000] trace event string verifier disabled
  36. [ 0.000000] rcu: Hierarchical RCU implementation.
  37. [ 0.000000] rcu: RCU event tracing is enabled.
  38. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  39. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  40. [ 0.000000] L2C: platform modifies aux control register: 0x1e070000 -> 0x3e470000
  41. [ 0.000000] L2C: DT/platform modifies aux control register: 0x1e070000 -> 0x3e470000
  42. [ 0.000000] L2C-310 erratum 727915 enabled
  43. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  44. [ 0.000000] L2C-310 ID prefetch enabled, offset 6 lines
  45. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  46. [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000
  47. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  48. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  49. [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
  50. [ 0.000000] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns
  51. [ 0.001403] TI gptimer clockevent: always-on 32768 Hz at /ocp/interconnect@4a300000/segment@10000/target-module@8000
  52. [ 0.005126] Console: colour dummy device 80x30
  53. [ 0.005279] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
  54. [ 0.089813] CPU: Testing write buffer coherency: ok
  55. [ 0.089904] CPU0: Spectre v2: using BPIALL workaround
  56. [ 0.089904] pid_max: default: 32768 minimum: 301
  57. [ 0.090057] LSM: initializing lsm=capability
  58. [ 0.090209] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  59. [ 0.090240] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  60. [ 0.091827] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  61. [ 0.091857] smp: CPU1 parked within kernel, needs reset (0x0 0x8008a848)
  62. [ 0.149932] Setting up static identity map for 0x80100000 - 0x80100078
  63. [ 0.159942] rcu: Hierarchical SRCU implementation.
  64. [ 0.159942] rcu: Max phase no-delay instances is 1000.
  65. [ 0.160461] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  66. [ 0.170501] smp: Bringing up secondary CPUs ...
  67. [ 0.249847] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  68. [ 0.249877] CPU1: Spectre v2: using BPIALL workaround
  69. [ 0.250122] smp: Brought up 1 node, 2 CPUs
  70. [ 0.250152] SMP: Total of 2 processors activated (2393.70 BogoMIPS).
  71. [ 0.250152] CPU: All CPU(s) started in SVC mode.
  72. [ 0.250854] Memory: 992908K/1046528K available (11264K kernel code, 1157K rwdata, 2736K rodata, 1024K init, 297K bss, 34316K reserved, 16384K cma-reserved, 145056K highmem)
  73. [ 0.251647] devtmpfs: initialized
  74. [ 0.280273] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  75. [ 0.280731] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  76. [ 0.280761] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  77. [ 0.282073] pinctrl core: initialized pinctrl subsystem
  78. [ 0.283874] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  79. [ 0.287353] DMA: preallocated 256 KiB pool for atomic coherent allocations
  80. [ 0.288360] audit: initializing netlink subsys (disabled)
  81. [ 0.288909] audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
  82. [ 0.289764] thermal_sys: Registered thermal governor 'fair_share'
  83. [ 0.289764] thermal_sys: Registered thermal governor 'step_wise'
  84. [ 0.289794] thermal_sys: Registered thermal governor 'user_space'
  85. [ 0.289947] cpuidle: using governor menu
  86. [ 0.333068] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_instr_cm@e00/clk@20
  87. [ 0.333129] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_2_cm@800/clk@20
  88. [ 0.333160] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_1_cm@700/clk@20
  89. [ 0.339721] platform lvds-encoder: Fixed dependency cycle(s) with /ocp/target-module@58000000/dss@0
  90. [ 0.342071] platform lvds-encoder: Fixed dependency cycle(s) with /panel
  91. [ 0.342193] platform panel: Fixed dependency cycle(s) with /lvds-encoder
  92. [ 0.342681] No ATAGs?
  93. [ 0.342864] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  94. [ 0.342864] hw-breakpoint: maximum watchpoint size is 4 bytes.
  95. [ 0.350280] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
  96. [ 0.365356] iommu: Default domain type: Translated
  97. [ 0.365356] iommu: DMA domain TLB invalidation policy: strict mode
  98. [ 0.367919] SCSI subsystem initialized
  99. [ 0.368225] libata version 3.00 loaded.
  100. [ 0.368652] pps_core: LinuxPPS API ver. 1 registered
  101. [ 0.368682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  102. [ 0.368713] PTP clock support registered
  103. [ 0.371215] vgaarb: loaded
  104. [ 0.372314] clocksource: Switched to clocksource 32k_counter
  105. [ 1.300140] VFS: Disk quotas dquot_6.6.0
  106. [ 1.300170] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  107. [ 1.315979] NET: Registered PF_INET protocol family
  108. [ 1.316345] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  109. [ 1.319610] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  110. [ 1.319641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  111. [ 1.319671] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  112. [ 1.319793] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  113. [ 1.320098] TCP: Hash tables configured (established 8192 bind 8192)
  114. [ 1.320220] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  115. [ 1.320281] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  116. [ 1.320587] NET: Registered PF_UNIX/PF_LOCAL protocol family
  117. [ 1.321502] RPC: Registered named UNIX socket transport module.
  118. [ 1.321533] RPC: Registered udp transport module.
  119. [ 1.321533] RPC: Registered tcp transport module.
  120. [ 1.321533] RPC: Registered tcp-with-tls transport module.
  121. [ 1.321533] RPC: Registered tcp NFSv4.1 backchannel transport module.
  122. [ 1.321563] PCI: CLS 0 bytes, default 64
  123. [ 1.323547] Initialise system trusted keyrings
  124. [ 1.323974] Trying to unpack rootfs image as initramfs...
  125. [ 1.333007] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  126. [ 1.334442] NFS: Registering the id_resolver key type
  127. [ 1.334533] Key type id_resolver registered
  128. [ 1.334564] Key type id_legacy registered
  129. [ 1.334625] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  130. [ 1.335083] Key type asymmetric registered
  131. [ 1.335113] Asymmetric key parser 'x509' registered
  132. [ 1.335296] bounce: pool size: 64 pages
  133. [ 1.335357] io scheduler mq-deadline registered
  134. [ 1.335357] io scheduler kyber registered
  135. [ 1.335449] io scheduler bfq registered
  136. [ 1.345611] ledtrig-cpu: registered to indicate activity on CPUs
  137. [ 1.350341] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
  138. [ 1.370544] brd: module loaded
  139. [ 1.380187] loop: module loaded
  140. [ 1.381927] mtdoops: mtd device (mtddev=name/number) must be supplied
  141. [ 1.384277] mdio_bus fixed-0: using lookup tables for GPIO lookup
  142. [ 1.384307] mdio_bus fixed-0: No GPIO consumer reset found
  143. [ 1.386322] i2c_dev: i2c /dev entries driver
  144. [ 1.387390] sdhci: Secure Digital Host Controller Interface driver
  145. [ 1.387390] sdhci: Copyright(c) Pierre Ossman
  146. [ 1.387725] sdhci-pltfm: SDHCI platform and OF driver helper
  147. [ 1.389434] Initializing XFRM netlink socket
  148. [ 1.389556] NET: Registered PF_INET6 protocol family
  149. [ 1.391906] Segment Routing with IPv6
  150. [ 1.392028] In-situ OAM (IOAM) with IPv6
  151. [ 1.392181] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  152. [ 1.393310] NET: Registered PF_PACKET protocol family
  153. [ 1.393341] NET: Registered PF_KEY protocol family
  154. [ 1.393524] Key type dns_resolver registered
  155. [ 1.393859] ThumbEE CPU extension supported.
  156. [ 1.393890] Registering SWP/SWPB emulation handler
  157. [ 1.395141] twl: not initialized
  158. [ 1.395141] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  159. [ 1.395141] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  160. [ 1.395202] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  161. [ 1.395202] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  162. [ 1.395233] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  163. [ 1.395233] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
  164. [ 1.395263] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
  165. [ 1.395294] Power Management for TI OMAP4+ devices.
  166. [ 1.395935] SmartReflex Class3 initialized
  167. [ 1.407836] Loading compiled-in X.509 certificates
  168. [ 1.468231] gpiochip_find_base_unlocked: found new base at 512
  169. [ 1.468719] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
  170. [ 1.468841] gpio gpiochip0: registered GPIOs 512 to 543 on gpio-0-31
  171. [ 1.468933] OMAP GPIO hardware version 0.1
  172. [ 1.472991] ti-sysc 4a318000.target-module: probe with driver ti-sysc failed with error -16
  173. [ 1.476684] pinctrl-single 4a31e040.pinmux: 28 pins, size 56
  174. [ 1.479339] platform 4a000000.interconnect: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_cfg_cm@d00/clk@20
  175. [ 1.515563] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
  176. [ 1.526458] omap-iommu 4a066000.mmu: 4a066000.mmu registered
  177. [ 1.536682] smartreflex 4a0d9000.smartreflex: omap_sr_probe: SmartReflex driver initialized
  178. [ 1.539123] Freeing initrd memory: 2504K
  179. [ 1.539825] smartreflex 4a0db000.smartreflex: omap_sr_probe: SmartReflex driver initialized
  180. [ 1.542022] smartreflex 4a0dd000.smartreflex: omap_sr_probe: SmartReflex driver initialized
  181. [ 1.548400] pinctrl-single 4a100040.pinmux: 203 pins, size 406
  182. [ 1.563079] omap8250 48020000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0' for 'rs485-term' GPIO lookup
  183. [ 1.563140] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
  184. [ 1.563201] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
  185. [ 1.563232] omap8250 48020000.serial: using lookup tables for GPIO lookup
  186. [ 1.563232] omap8250 48020000.serial: No GPIO consumer rs485-term found
  187. [ 1.563262] omap8250 48020000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0' for 'rs485-rx-during-tx' GPIO lookup
  188. [ 1.563293] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
  189. [ 1.563323] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0[0]'
  190. [ 1.563354] omap8250 48020000.serial: using lookup tables for GPIO lookup
  191. [ 1.563385] omap8250 48020000.serial: No GPIO consumer rs485-rx-during-tx found
  192. [ 1.563781] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 99, base_baud = 3000000) is a 8250
  193. [ 1.576690] gpiochip_find_base_unlocked: found new base at 544
  194. [ 1.577117] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
  195. [ 1.577239] gpio gpiochip1: registered GPIOs 544 to 575 on gpio-32-63
  196. [ 1.579498] gpiochip_find_base_unlocked: found new base at 576
  197. [ 1.579833] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
  198. [ 1.579956] gpio gpiochip2: registered GPIOs 576 to 607 on gpio-64-95
  199. [ 1.582092] gpiochip_find_base_unlocked: found new base at 608
  200. [ 1.582611] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
  201. [ 1.582733] gpio gpiochip3: registered GPIOs 608 to 639 on gpio-96-127
  202. [ 1.584899] gpiochip_find_base_unlocked: found new base at 640
  203. [ 1.585235] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4)
  204. [ 1.585357] gpio gpiochip4: registered GPIOs 640 to 671 on gpio-128-159
  205. [ 1.587280] gpiochip_find_base_unlocked: found new base at 672
  206. [ 1.587615] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5)
  207. [ 1.587768] gpio gpiochip5: registered GPIOs 672 to 703 on gpio-160-191
  208. [ 1.591247] i2c i2c-2: using DT '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0' for 'scl' GPIO lookup
  209. [ 1.591308] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
  210. [ 1.591369] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
  211. [ 1.591400] i2c i2c-2: using lookup tables for GPIO lookup
  212. [ 1.591400] i2c i2c-2: No GPIO consumer scl found
  213. [ 1.591430] i2c i2c-2: using DT '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0' for 'sda' GPIO lookup
  214. [ 1.591461] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
  215. [ 1.591491] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/i2c@0[0]'
  216. [ 1.591522] i2c i2c-2: using lookup tables for GPIO lookup
  217. [ 1.591552] i2c i2c-2: No GPIO consumer sda found
  218. [ 1.592102] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz
  219. [ 1.595764] omap8250 4806a000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0' for 'rs485-term' GPIO lookup
  220. [ 1.595794] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
  221. [ 1.595855] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
  222. [ 1.595886] omap8250 4806a000.serial: using lookup tables for GPIO lookup
  223. [ 1.595886] omap8250 4806a000.serial: No GPIO consumer rs485-term found
  224. [ 1.595916] omap8250 4806a000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0' for 'rs485-rx-during-tx' GPIO lookup
  225. [ 1.595947] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
  226. [ 1.595977] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
  227. [ 1.596008] omap8250 4806a000.serial: using lookup tables for GPIO lookup
  228. [ 1.596008] omap8250 4806a000.serial: No GPIO consumer rs485-rx-during-tx found
  229. [ 1.596405] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 111, base_baud = 3000000) is a 8250
  230. [ 1.600280] omap8250 4806c000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0' for 'rs485-term' GPIO lookup
  231. [ 1.600341] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
  232. [ 1.600372] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
  233. [ 1.600402] omap8250 4806c000.serial: using lookup tables for GPIO lookup
  234. [ 1.600433] omap8250 4806c000.serial: No GPIO consumer rs485-term found
  235. [ 1.600433] omap8250 4806c000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0' for 'rs485-rx-during-tx' GPIO lookup
  236. [ 1.600463] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
  237. [ 1.600524] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0[0]'
  238. [ 1.600555] omap8250 4806c000.serial: using lookup tables for GPIO lookup
  239. [ 1.600555] omap8250 4806c000.serial: No GPIO consumer rs485-rx-during-tx found
  240. [ 1.600921] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 112, base_baud = 3000000) is a 8250
  241. [ 1.601531] serial serial0: tty port ttyS1 registered
  242. [ 1.605316] omap8250 4806e000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0' for 'rs485-term' GPIO lookup
  243. [ 1.605377] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0[0]'
  244. [ 1.605407] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0[0]'
  245. [ 1.605438] omap8250 4806e000.serial: using lookup tables for GPIO lookup
  246. [ 1.605468] omap8250 4806e000.serial: No GPIO consumer rs485-term found
  247. [ 1.605468] omap8250 4806e000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0' for 'rs485-rx-during-tx' GPIO lookup
  248. [ 1.605499] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0[0]'
  249. [ 1.605560] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6e000/serial@0[0]'
  250. [ 1.605590] omap8250 4806e000.serial: using lookup tables for GPIO lookup
  251. [ 1.605590] omap8250 4806e000.serial: No GPIO consumer rs485-rx-during-tx found
  252. [ 1.605957] 4806e000.serial: ttyS3 at MMIO 0x4806e000 (irq = 114, base_baud = 3000000) is a 8250
  253. [ 1.609832] i2c i2c-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0' for 'scl' GPIO lookup
  254. [ 1.609863] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
  255. [ 1.609924] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
  256. [ 1.609954] i2c i2c-0: using lookup tables for GPIO lookup
  257. [ 1.609954] i2c i2c-0: No GPIO consumer scl found
  258. [ 1.609985] i2c i2c-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0' for 'sda' GPIO lookup
  259. [ 1.610015] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
  260. [ 1.610076] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
  261. [ 1.610107] i2c i2c-0: using lookup tables for GPIO lookup
  262. [ 1.610107] i2c i2c-0: No GPIO consumer sda found
  263. [ 1.611663] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  264. [ 1.624786] twl 0-0048: PIH (irq 116) nested IRQs
  265. [ 1.634246] VUSIM: Bringing 0uV into 1200000-1200000uV
  266. [ 1.639007] VAUX3_6030: Bringing 3300000uV into 3000000-3000000uV
  267. [ 1.644683] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz
  268. [ 1.649780] i2c i2c-1: using DT '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0' for 'scl' GPIO lookup
  269. [ 1.649841] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0[0]'
  270. [ 1.649902] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0[0]'
  271. [ 1.649932] i2c i2c-1: using lookup tables for GPIO lookup
  272. [ 1.649932] i2c i2c-1: No GPIO consumer scl found
  273. [ 1.649963] i2c i2c-1: using DT '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0' for 'sda' GPIO lookup
  274. [ 1.649993] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0[0]'
  275. [ 1.650024] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@72000/i2c@0[0]'
  276. [ 1.650054] i2c i2c-1: using lookup tables for GPIO lookup
  277. [ 1.650085] i2c i2c-1: No GPIO consumer sda found
  278. [ 1.650115] omap_i2c 48072000.i2c: bus 1 rev0.10 at 100 kHz
  279. [ 1.658203] ti-sysc 48091fe0.target-module: clock get error for fck: -2
  280. [ 1.658233] ti-sysc 48091fe0.target-module: probe with driver ti-sysc failed with error -2
  281. [ 1.690673] i2c i2c-3: using DT '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0' for 'scl' GPIO lookup
  282. [ 1.690734] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0[0]'
  283. [ 1.690795] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0[0]'
  284. [ 1.690826] i2c i2c-3: using lookup tables for GPIO lookup
  285. [ 1.690826] i2c i2c-3: No GPIO consumer scl found
  286. [ 1.690856] i2c i2c-3: using DT '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0' for 'sda' GPIO lookup
  287. [ 1.690887] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0[0]'
  288. [ 1.690948] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@200000/target-module@150000/i2c@0[0]'
  289. [ 1.690979] i2c i2c-3: using lookup tables for GPIO lookup
  290. [ 1.690979] i2c i2c-3: No GPIO consumer sda found
  291. [ 1.692932] omap_i2c 48350000.i2c: bus 3 rev0.10 at 100 kHz
  292. [ 1.698181] ocp:target-module@48210000:mpu:fck: device ID is greater than 24
  293. [ 1.722015] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  294. [ 1.722045] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
  295. [ 1.722076] gpiochip_find_base_unlocked: found new base at 704
  296. [ 1.722717] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
  297. [ 1.722839] gpio gpiochip6: registered GPIOs 704 to 707 on omap-gpmc
  298. [ 1.724914] ocp:target-module@54000000:pmu:fck: device ID is greater than 24
  299. [ 1.725341] armv7-pmu ocp:target-module@54000000:pmu: hw perfevents: no irqs for PMU, sampling events not supported
  300. [ 1.725708] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available
  301. [ 1.727966] omap-iommu 55082000.mmu: 55082000.mmu registered
  302. [ 1.746459] platform lvds-encoder: Fixed dependency cycle(s) with /ocp/target-module@58000000/dss@0
  303. [ 1.746704] platform 58000000.dss: Fixed dependency cycle(s) with /lvds-encoder
  304. [ 1.748779] 5a05a400.target-module:iva:fck: device ID is greater than 24
  305. [ 1.755126] reg-fixed-voltage regulator-espresso-wlan: using DT '/regulator-espresso-wlan' for '(default)' GPIO lookup
  306. [ 1.755187] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-espresso-wlan[0]'
  307. [ 1.755218] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator-espresso-wlan[0]' - status (0)
  308. [ 1.755279] gpio gpiochip3: Persistence not supported for GPIO 8
  309. [ 1.757507] reg-fixed-voltage regulator-espresso-internal: using DT '/regulator-espresso-internal' for '(default)' GPIO lookup
  310. [ 1.757568] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-espresso-internal[0]' - status (0)
  311. [ 1.757598] gpio gpiochip1: Persistence not supported for GPIO 21
  312. [ 1.757873] reg-fixed-voltage regulator-touch-ldo-en: using DT '/regulator-touch-ldo-en' for '(default)' GPIO lookup
  313. [ 1.757904] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-touch-ldo-en[0]' - status (0)
  314. [ 1.757934] gpio gpiochip1: Persistence not supported for GPIO 22
  315. [ 1.758514] reg-fixed-voltage regulator-lcd: using DT '/regulator-lcd' for '(default)' GPIO lookup
  316. [ 1.758544] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-lcd[0]' - status (0)
  317. [ 1.758575] gpio gpiochip4: Persistence not supported for GPIO 7
  318. [ 1.759429] reg-fixed-voltage regulator-espresso-external: using DT '/regulator-espresso-external' for '(default)' GPIO lookup
  319. [ 1.759490] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-espresso-external[0]' - status (0)
  320. [ 1.759521] gpio gpiochip1: Persistence not supported for GPIO 2
  321. [ 1.762237] omap_hsmmc 4809c000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0' for 'cd' GPIO lookup
  322. [ 1.762268] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
  323. [ 1.762329] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
  324. [ 1.762420] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
  325. [ 1.762451] omap_hsmmc 4809c000.mmc: No GPIO consumer cd found
  326. [ 1.762451] omap_hsmmc 4809c000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0' for 'wp' GPIO lookup
  327. [ 1.762512] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
  328. [ 1.763000] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
  329. [ 1.763061] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
  330. [ 1.763061] omap_hsmmc 4809c000.mmc: No GPIO consumer wp found
  331. [ 1.767700] clk: Disabling unused clocks
  332. [ 1.768127] PM: genpd: Disabling unused power domains
  333. [ 1.768310] Warning: unable to open an initial console.
  334. [ 1.793121] hw-breakpoint: Failed to enable monitor mode on CPU 0.
  335. [ 1.797088] hw-breakpoint: CPU 0 failed to disable vector catch
  336. [ 1.835479] omap_hsmmc 480d5000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@d5000/mmc@0' for 'wp' GPIO lookup
  337. [ 1.835540] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@d5000/mmc@0[0]'
  338. [ 1.835571] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@d5000/mmc@0[0]'
  339. [ 1.835601] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup
  340. [ 1.835632] omap_hsmmc 480d5000.mmc: No GPIO consumer wp found
  341. [ 1.865081] Freeing unused kernel image (initmem) memory: 1024K
  342. [ 1.865966] Run /init as init process
  343. [ 1.865997] with arguments:
  344. [ 1.865997] /init
  345. [ 1.865997] with environment:
  346. [ 1.865997] HOME=/
  347. [ 1.866027] TERM=linux
  348. [ 1.866027] vram=15M
  349. [ 1.866027] switch_sel=1
  350. [ 1.866027] bootmode=0
  351. [ 1.866027] sec_log=2052K@0x9fdff000
  352. [ 1.866027] sec_bootfb=8M@0xbef00000
  353. [ 1.866058] lcd_panel_id=2
  354. [ 1.866058] cordon=38e462ea33d9cefc605244fcfb64770b
  355. [ 1.866241] omap_hsmmc 480b4000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0' for 'cd' GPIO lookup
  356. [ 1.866302] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
  357. [ 1.866363] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
  358. [ 1.866394] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
  359. [ 1.866546] omap_hsmmc 480b4000.mmc: No GPIO consumer cd found
  360. [ 1.866546] omap_hsmmc 480b4000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0' for 'wp' GPIO lookup
  361. [ 1.866607] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
  362. [ 1.866638] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
  363. [ 1.866668] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
  364. [ 1.866699] omap_hsmmc 480b4000.mmc: No GPIO consumer wp found
  365. [ 1.884460] mmc4: new high speed SDIO card at address 0001
  366. [ 1.962249] mmc1: new high speed MMC card at address 0001
  367. [ 1.973297] mmcblk1: mmc1:0001 MAG2GA 14.7 GiB
  368. [ 1.981597] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
  369. [ 1.985809] mmcblk1boot0: mmc1:0001 MAG2GA 2.00 MiB
  370. [ 1.988159] mmcblk1boot1: mmc1:0001 MAG2GA 2.00 MiB
  371. [ 1.990264] mmcblk1rpmb: mmc1:0001 MAG2GA 128 KiB, chardev (250:0)
  372. [ 2.280609] mmc0: host does not support reading read-only switch, assuming write-enable
  373. [ 2.284759] mmc0: new high speed SDXC card at address aaaa
  374. [ 2.285797] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
  375. [ 2.289825] mmcblk0: p1 p2
  376. [ 17.738281] EXT4-fs (mmcblk0p1): mounted filesystem 63b9e6f7-469b-4e08-907f-429881db9ca6 ro without journal. Quota mode: none.
  377. [ 20.497283] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  378. [ 20.497314] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  379. [ 20.863891] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
  380. [ 20.871398] EXT4-fs (mmcblk0p2): recovery complete
  381. [ 20.876037] EXT4-fs (mmcblk0p2): mounted filesystem cb68d54b-50cf-474d-a15c-1af846b82ff7 ro with ordered data mode. Quota mode: none.
  382. [ 20.891510] EXT4-fs (mmcblk0p1): unmounting filesystem 63b9e6f7-469b-4e08-907f-429881db9ca6.
  383. [ 20.992462] random: crng init done
  384. [ 21.817840] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  385. [ 21.822052] EXT4-fs (mmcblk0p1): mounted filesystem 63b9e6f7-469b-4e08-907f-429881db9ca6 r/w without journal. Quota mode: none.
  386. [ 25.921722] udevd[1361]: starting version 3.2.14
  387. [ 26.125244] udevd[1361]: starting eudev-3.2.14
  388. [ 26.548278] pwm-backlight backlight: using DT '/backlight' for 'enable' GPIO lookup
  389. [ 26.548339] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0)
  390. [ 26.548400] gpio gpiochip2: Persistence not supported for GPIO 31
  391. [ 26.548400] gpio-607 (enable): no flags found for GPIO enable
  392. [ 26.572326] l4-per-clkctrl:0048:0: failed to disable
  393. [ 26.572875] pwm-backlight backlight: using DT '/backlight' for 'enable' GPIO lookup
  394. [ 26.572967] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0)
  395. [ 26.572998] gpio gpiochip2: Persistence not supported for GPIO 31
  396. [ 26.573028] gpio-607 (enable): no flags found for GPIO enable
  397. [ 26.580871] gpio-keys gpio-keys: using DT '/gpio-keys/power' for '(default)' GPIO lookup
  398. [ 26.580963] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0)
  399. [ 26.581085] gpio gpiochip0: Persistence not supported for GPIO 3
  400. [ 26.581329] gpio-keys gpio-keys: using DT '/gpio-keys/button-volup' for '(default)' GPIO lookup
  401. [ 26.581390] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button-volup[0]' - status (0)
  402. [ 26.581420] gpio gpiochip0: Persistence not supported for GPIO 30
  403. [ 26.581573] gpio-keys gpio-keys: using DT '/gpio-keys/button-voldown' for '(default)' GPIO lookup
  404. [ 26.581604] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button-voldown[0]' - status (0)
  405. [ 26.581634] gpio gpiochip0: Persistence not supported for GPIO 8
  406. [ 26.582031] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  407. [ 26.616210] gpio-ir-tx irled@0: using DT '/irled@0' for '(default)' GPIO lookup
  408. [ 26.616302] of_get_named_gpiod_flags: parsed 'gpios' property of node '/irled@0[0]' - status (0)
  409. [ 26.616333] gpio gpiochip1: Persistence not supported for GPIO 27
  410. [ 26.616546] rc rc0: GPIO IR Bit Banging Transmitter as /devices/platform/irled@0/rc/rc0
  411. [ 26.616851] rc rc0: lirc_dev: driver gpio-ir-tx registered at minor = 0, no receiver, raw IR transmitter
  412. [ 26.889770] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  413. [ 26.891784] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  414. [ 27.575500] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
  415. [ 27.576568] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2024-10-29T17:43:01 UTC (1730223781)
  416. [ 27.576690] twl_rtc 48070000.i2c:twl@48:rtc: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/rtc' for 'wp' GPIO lookup
  417. [ 27.576782] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/rtc[0]'
  418. [ 27.576812] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/rtc[0]'
  419. [ 27.576873] twl_rtc 48070000.i2c:twl@48:rtc: using lookup tables for GPIO lookup
  420. [ 27.576873] twl_rtc 48070000.i2c:twl@48:rtc: No GPIO consumer wp found
  421. [ 27.657226] Bluetooth: Core ver 2.22
  422. [ 27.657318] NET: Registered PF_BLUETOOTH protocol family
  423. [ 27.657348] Bluetooth: HCI device and connection manager initialized
  424. [ 27.657379] Bluetooth: HCI socket layer initialized
  425. [ 27.657379] Bluetooth: L2CAP socket layer initialized
  426. [ 27.657409] Bluetooth: SCO socket layer initialized
  427. [ 27.765838] usbcore: registered new interface driver usbfs
  428. [ 27.765991] usbcore: registered new interface driver hub
  429. [ 27.766113] usbcore: registered new device driver usb
  430. [ 27.828643] Bluetooth: HCI UART driver ver 2.3
  431. [ 27.828643] Bluetooth: HCI UART protocol H4 registered
  432. [ 27.828674] Bluetooth: HCI UART protocol BCSP registered
  433. [ 27.828826] Bluetooth: HCI UART protocol LL registered
  434. [ 27.828887] Bluetooth: HCI UART protocol Three-wire (H5) registered
  435. [ 27.830261] hci_uart_bcm serial0-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth' for 'device-wakeup' GPIO lookup
  436. [ 27.830383] of_get_named_gpiod_flags: parsed 'device-wakeup-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth[0]' - status (0)
  437. [ 27.830444] gpio gpiochip2: Persistence not supported for GPIO 29
  438. [ 27.830444] hci_uart_bcm serial0-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth' for 'shutdown' GPIO lookup
  439. [ 27.830505] of_get_named_gpiod_flags: parsed 'shutdown-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth[0]' - status (0)
  440. [ 27.830566] gpio gpiochip3: Persistence not supported for GPIO 7
  441. [ 27.830627] hci_uart_bcm serial0-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth' for 'reset' GPIO lookup
  442. [ 27.830780] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth[0]' - status (0)
  443. [ 27.830871] gpio gpiochip2: Persistence not supported for GPIO 18
  444. [ 27.830993] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  445. [ 27.842620] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  446. [ 27.842803] hci_uart_bcm serial0-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth' for 'host-wakeup' GPIO lookup
  447. [ 27.842956] of_get_named_gpiod_flags: can't parse 'host-wakeup-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth[0]'
  448. [ 27.843078] of_get_named_gpiod_flags: can't parse 'host-wakeup-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6c000/serial@0/bluetooth[0]'
  449. [ 27.843109] hci_uart_bcm serial0-0: using lookup tables for GPIO lookup
  450. [ 27.843139] hci_uart_bcm serial0-0: No GPIO consumer host-wakeup found
  451. [ 27.863952] Bluetooth: HCI UART protocol Broadcom registered
  452. [ 28.126922] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
  453. [ 28.127349] omap-des 480a5000.des: will run requests pump with realtime priority
  454. [ 28.207336] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Initialized TWL6030 USB module
  455. [ 28.218139] Bluetooth: hci0: BCM: chip id 62
  456. [ 28.220886] Bluetooth: hci0: BCM: features 0x0f
  457. [ 28.242767] Driver for 1-wire Dallas network protocol.
  458. [ 28.252563] Bluetooth: hci0: BCM4330B1
  459. [ 28.252593] Bluetooth: hci0: BCM4330B1 (002.001.003) build 0000
  460. [ 28.275787] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
  461. [ 28.275817] Bluetooth: hci0: BCM: 'brcm/BCM4330B1.samsung,espresso7.hcd'
  462. [ 28.275817] Bluetooth: hci0: BCM: 'brcm/BCM4330B1.hcd'
  463. [ 28.275817] Bluetooth: hci0: BCM: 'brcm/BCM.samsung,espresso7.hcd'
  464. [ 28.275848] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
  465. [ 28.363616] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.6. Driver in Interrupt mode
  466. [ 28.576538] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
  467. [ 28.855377] ehci-omap 4a064c00.ehci: EHCI Host Controller
  468. [ 28.855407] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
  469. [ 28.898956] ehci-omap 4a064c00.ehci: irq 142, io mem 0x4a064c00
  470. [ 28.912475] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
  471. [ 28.913421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
  472. [ 28.913482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  473. [ 28.913543] usb usb1: Product: EHCI Host Controller
  474. [ 28.913574] usb usb1: Manufacturer: Linux 6.12.0-rc4 ehci_hcd
  475. [ 28.913604] usb usb1: SerialNumber: 4a064c00.ehci
  476. [ 28.918884] ohci-platform 4a064800.ohci: Generic Platform OHCI controller
  477. [ 28.941436] hub 1-0:1.0: USB hub found
  478. [ 28.943542] hub 1-0:1.0: 3 ports detected
  479. [ 28.950927] ohci-platform 4a064800.ohci: new USB bus registered, assigned bus number 2
  480. [ 28.952301] ohci-platform 4a064800.ohci: irq 143, io mem 0x4a064800
  481. [ 28.998291] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
  482. [ 29.014739] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  483. [ 29.014801] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
  484. [ 29.015228] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
  485. [ 29.015228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 29.015258] usb usb3: Product: MUSB HDRC host driver
  487. [ 29.015258] usb usb3: Manufacturer: Linux 6.12.0-rc4 musb-hcd
  488. [ 29.015289] usb usb3: SerialNumber: musb-hdrc.1.auto
  489. [ 29.016265] hub 3-0:1.0: USB hub found
  490. [ 29.016326] hub 3-0:1.0: 1 port detected
  491. [ 29.067199] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
  492. [ 29.067230] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  493. [ 29.067260] usb usb2: Product: Generic Platform OHCI controller
  494. [ 29.067260] usb usb2: Manufacturer: Linux 6.12.0-rc4 ohci_hcd
  495. [ 29.067260] usb usb2: SerialNumber: 4a064800.ohci
  496. [ 29.074951] hub 2-0:1.0: USB hub found
  497. [ 29.075042] hub 2-0:1.0: 3 ports detected
  498. [ 29.206573] thermal thermal_zone1: Temperature check failed (-19)
  499. [ 29.254425] omap-sham 4b100000.sham: hw accel on OMAP rev 4.3
  500. [ 29.257568] omap4-keypad 4a31c000.keypad: number of keypad rows/columns not specified
  501. [ 29.257598] omap4-keypad 4a31c000.keypad: probe with driver omap4-keypad failed with error -22
  502. [ 29.263122] omap-sham 4b100000.sham: will run requests pump with realtime priority
  503. [ 29.279418] omap-aes 4b501000.aes: OMAP AES hw accel rev: 3.2
  504. [ 29.287048] omap-aes 4b501000.aes: will run requests pump with realtime priority
  505. [ 29.294555] omap-aes 4b701000.aes: OMAP AES hw accel rev: 3.2
  506. [ 29.295715] omap-aes 4b701000.aes: will run requests pump with realtime priority
  507. [ 29.339721] emif_probe: error getting device data
  508. [ 29.339813] emif_probe: error getting device data
  509. [ 29.747711] pvrsrvkm 56000000.gpu: Enabling quirks 00000001
  510. [ 29.756317] vmalloc_node_range for size 33558528 failed: Address range restricted to 0xf6000000 - 0xff800000
  511. [ 29.756347] PVR_K:(Error): SysLocateDevices: Failed to map SGX registers
  512. [ 29.756378] PVR_K:(Error): SysInitialise: Failed to locate devices
  513. [ 29.861907] omapdss_dss 58000000.dss: supply vdda_video not found, using dummy regulator
  514. [ 29.917449] dmm 4e000000.dmm: initialized all PAT entries
  515. [ 29.919250] omapdss_dss 58000000.dss: supply vdda_video not found, using dummy regulator
  516. [ 31.257781] EXT4-fs (mmcblk0p2): re-mounted cb68d54b-50cf-474d-a15c-1af846b82ff7 r/w. Quota mode: none.
  517. [ 31.290374] EXT4-fs (mmcblk0p2): re-mounted cb68d54b-50cf-474d-a15c-1af846b82ff7 r/w. Quota mode: none.
  518. [ 31.335388] EXT4-fs (mmcblk0p1): re-mounted 63b9e6f7-469b-4e08-907f-429881db9ca6 r/w. Quota mode: none.
  519. [ 31.845306] lcd_en: disabling
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!