Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf66d800 (usable)
- [ 0.000000] BIOS-e820: 00000000bf66d800 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0xbf66d max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
- [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
- [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
- [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
- [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 00000000bf66d800 (usable)
- [ 0.000000] modified: 00000000bf66d800 - 00000000c0000000 (reserved)
- [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
- [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
- [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
- [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
- [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
- [ 0.000000] RAMDISK: 371a9000 - 37fef5ee
- [ 0.000000] Allocated new RAMDISK: 008e1000 - 017275ee
- [ 0.000000] Move RAMDISK from 00000000371a9000 - 0000000037fef5ed to 008e1000 - 017275ed
- [ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL )
- [ 0.000000] ACPI: XSDT bf66f200 00054 (v01 DELL M08 27D8011E ASL 00000061)
- [ 0.000000] ACPI: FACP bf66f09c 000F4 (v04 DELL M08 27D8011E ASL 00000061)
- [ 0.000000] ACPI: DSDT bf66f800 0567C (v02 INT430 SYSFexxx 00001001 INTL 20050624)
- [ 0.000000] ACPI: FACS bf67e000 00040
- [ 0.000000] ACPI: HPET bf66f300 00038 (v01 DELL M08 00000001 ASL 00000061)
- [ 0.000000] ACPI: APIC bf66f400 00068 (v01 DELL M08 27D8011E ASL 00000047)
- [ 0.000000] ACPI: MCFG bf66f3c0 0003E (v16 DELL M08 27D8011E ASL 00000061)
- [ 0.000000] ACPI: BOOT bf66efc0 00028 (v01 DELL M08 27D8011E ASL 00000061)
- [ 0.000000] ACPI: SSDT bf66d9fa 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2174MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00008000 - 0000ef00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
- [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- [ 0.000000] #5 [00008dd000 - 00008e0188] BRK ==> [00008dd000 - 00008e0188]
- [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- [ 0.000000] #7 [00008e1000 - 00017275ee] NEW RAMDISK ==> [00008e1000 - 00017275ee]
- [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000bf66d
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000002
- [ 0.000000] 0: 0x00000006 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000bf66d
- [ 0.000000] On node 0 totalpages: 783880
- [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1729000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4349 pages used for memmap
- [ 0.000000] HighMem zone: 552306 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s36056 r0 d21288 u2097152
- [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777755
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=87b9b1b3-0b82-4f19-bbb6-73d3cd7f71ca ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 15679620 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf66d)
- [ 0.000000] Memory: 3070928k/3135924k available (4680k kernel code, 63520k reserved, 2122k data, 656k init, 2226620k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
- [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:424
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1595.629 MHz processor.
- [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.25 BogoMIPS (lpj=6382516)
- [ 0.004026] Security Framework initialized
- [ 0.004049] AppArmor: AppArmor initialized
- [ 0.004057] Mount-cache hash table entries: 512
- [ 0.004206] Initializing cgroup subsys ns
- [ 0.004211] Initializing cgroup subsys cpuacct
- [ 0.004217] Initializing cgroup subsys memory
- [ 0.004226] Initializing cgroup subsys devices
- [ 0.004229] Initializing cgroup subsys freezer
- [ 0.004232] Initializing cgroup subsys net_cls
- [ 0.004256] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004259] CPU: L2 cache: 2048K
- [ 0.004263] CPU: Physical Processor ID: 0
- [ 0.004265] CPU: Processor Core ID: 0
- [ 0.004269] mce: CPU supports 6 MCE banks
- [ 0.004279] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004284] using mwait in idle threads.
- [ 0.004291] Performance Events: Core2 events, Intel PMU driver.
- [ 0.004302] ... version: 2
- [ 0.004305] ... bit width: 40
- [ 0.004307] ... generic registers: 2
- [ 0.004309] ... value mask: 000000ffffffffff
- [ 0.004312] ... max period: 000000007fffffff
- [ 0.004315] ... fixed-purpose events: 3
- [ 0.004317] ... event mask: 0000000700000003
- [ 0.004322] Checking 'hlt' instruction... OK.
- [ 0.023310] ACPI: Core revision 20090903
- [ 0.033905] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.033914] ftrace: allocating 21789 entries in 43 pages
- [ 0.036064] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.036454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.078101] CPU0: Intel(R) Core(TM)2 Duo CPU T5470 @ 1.60GHz stepping 0d
- [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 2048K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
- [ 0.164074] CPU1: Intel(R) Core(TM)2 Duo CPU T5470 @ 1.60GHz stepping 0d
- [ 0.164089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.168020] Brought up 2 CPUs
- [ 0.168023] Total of 2 processors activated (6382.34 BogoMIPS).
- [ 0.168549] CPU0 attaching sched-domain:
- [ 0.168553] domain 0: span 0-1 level MC
- [ 0.168556] groups: 0 1
- [ 0.168563] CPU1 attaching sched-domain:
- [ 0.168566] domain 0: span 0-1 level MC
- [ 0.168569] groups: 1 0
- [ 0.168677] devtmpfs: initialized
- [ 0.168677] regulator: core version 0.5
- [ 0.168677] Time: 22:44:19 Date: 11/10/10
- [ 0.168677] NET: Registered protocol family 16
- [ 0.168677] Trying to unpack rootfs image as initramfs...
- [ 0.168677] EISA bus registered
- [ 0.168677] ACPI: bus type pci registered
- [ 0.168677] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
- [ 0.168677] PCI: MCFG area at f8000000 reserved in E820
- [ 0.168677] PCI: Using MMCONFIG for extended config space
- [ 0.168677] PCI: Using configuration type 1 for base access
- [ 0.172121] bio: create slab <bio-0> at 0
- [ 0.173279] ACPI: EC: Look up EC in DSDT
- [ 0.205996] ACPI: Interpreter enabled
- [ 0.206003] ACPI: (supports S0 S3 S4 S5)
- [ 0.206033] ACPI: Using IOAPIC for interrupt routing
- [ 0.252328] ACPI: No dock devices found.
- [ 0.273294] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.273441] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
- [ 0.273451] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.273458] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
- [ 0.273510] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
- [ 0.273646] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
- [ 0.273725] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
- [ 0.273811] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
- [ 0.273886] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.273894] pci 0000:00:1a.7: PME# disabled
- [ 0.273959] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
- [ 0.274032] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.274038] pci 0000:00:1b.0: PME# disabled
- [ 0.274150] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.274156] pci 0000:00:1c.0: PME# disabled
- [ 0.274273] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.274279] pci 0000:00:1c.1: PME# disabled
- [ 0.274397] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.274403] pci 0000:00:1c.3: PME# disabled
- [ 0.274520] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.274526] pci 0000:00:1c.5: PME# disabled
- [ 0.274603] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
- [ 0.274683] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
- [ 0.274760] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
- [ 0.274844] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
- [ 0.274920] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.274927] pci 0000:00:1d.7: PME# disabled
- [ 0.275133] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
- [ 0.275139] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
- [ 0.275145] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
- [ 0.275152] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
- [ 0.275216] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
- [ 0.275226] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
- [ 0.275236] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
- [ 0.275246] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
- [ 0.275256] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
- [ 0.275344] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
- [ 0.275353] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
- [ 0.275363] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
- [ 0.275373] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
- [ 0.275383] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
- [ 0.275393] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
- [ 0.275446] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.275451] pci 0000:00:1f.2: PME# disabled
- [ 0.275491] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
- [ 0.275522] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
- [ 0.275814] pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fffff]
- [ 0.276118] pci 0000:0c:00.0: supports D1 D2
- [ 0.276263] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
- [ 0.276344] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
- [ 0.276350] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe600000-0xfe7fffff]
- [ 0.276360] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
- [ 0.276563] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe5f0000-0xfe5fffff]
- [ 0.276817] pci 0000:09:00.0: PME# supported from D3hot D3cold
- [ 0.276829] pci 0000:09:00.0: PME# disabled
- [ 0.276950] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
- [ 0.277013] pci 0000:03:01.0: reg 10 32bit mmio: [0xfe4ff800-0xfe4fffff]
- [ 0.277084] pci 0000:03:01.0: supports D1 D2
- [ 0.277087] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.277093] pci 0000:03:01.0: PME# disabled
- [ 0.277145] pci 0000:03:01.1: reg 10 32bit mmio: [0xfe4ff400-0xfe4ff4ff]
- [ 0.277216] pci 0000:03:01.1: supports D1 D2
- [ 0.277219] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.277226] pci 0000:03:01.1: PME# disabled
- [ 0.277275] pci 0000:03:01.2: reg 10 32bit mmio: [0xfe4ff500-0xfe4ff5ff]
- [ 0.277346] pci 0000:03:01.2: supports D1 D2
- [ 0.277349] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.277356] pci 0000:03:01.2: PME# disabled
- [ 0.277406] pci 0000:03:01.3: reg 10 32bit mmio: [0xfe4ff600-0xfe4ff6ff]
- [ 0.277477] pci 0000:03:01.3: supports D1 D2
- [ 0.277480] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.277486] pci 0000:03:01.3: PME# disabled
- [ 0.277537] pci 0000:03:01.4: reg 10 32bit mmio: [0xfe4ff700-0xfe4ff7ff]
- [ 0.277608] pci 0000:03:01.4: supports D1 D2
- [ 0.277611] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.277617] pci 0000:03:01.4: PME# disabled
- [ 0.277699] pci 0000:00:1e.0: transparent bridge
- [ 0.277709] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff]
- [ 0.277754] pci_bus 0000:00: on NUMA node 0
- [ 0.277762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.278097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
- [ 0.278271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.278364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.278464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
- [ 0.278559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
- [ 0.296791] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
- [ 0.296942] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
- [ 0.297088] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
- [ 0.297236] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
- [ 0.297383] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- [ 0.297533] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- [ 0.297684] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
- [ 0.297820] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.297971] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.297996] vgaarb: loaded
- [ 0.298146] SCSI subsystem initialized
- [ 0.298254] libata version 3.00 loaded.
- [ 0.298340] usbcore: registered new interface driver usbfs
- [ 0.298359] usbcore: registered new interface driver hub
- [ 0.298394] usbcore: registered new device driver usb
- [ 0.298591] ACPI: WMI: Mapper loaded
- [ 0.298593] PCI: Using ACPI for IRQ routing
- [ 0.298868] NetLabel: Initializing
- [ 0.298871] NetLabel: domain hash size = 128
- [ 0.298873] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.298890] NetLabel: unlabeled traffic allowed by default
- [ 0.298931] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.298937] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.304032] Switching to clocksource tsc
- [ 0.306671] AppArmor: AppArmor Filesystem Enabled
- [ 0.306690] pnp: PnP ACPI init
- [ 0.306709] ACPI: bus type pnp registered
- [ 0.328504] pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.328509] pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.328646] pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.328651] pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.328655] pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.328659] pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
- [ 0.352721] pnp: PnP ACPI: found 12 devices
- [ 0.352725] ACPI: ACPI bus type pnp unregistered
- [ 0.352731] PnPBIOS: Disabled by ACPI PNP
- [ 0.352749] system 00:05: ioport range 0xc80-0xcff could not be reserved
- [ 0.352759] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
- [ 0.352767] system 00:09: ioport range 0x900-0x97f has been reserved
- [ 0.352771] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.352779] system 00:0a: ioport range 0xf400-0xf4fe has been reserved
- [ 0.352783] system 00:0a: ioport range 0x1080-0x10bf has been reserved
- [ 0.352787] system 00:0a: ioport range 0x10c0-0x10df has been reserved
- [ 0.352791] system 00:0a: ioport range 0x809-0x809 has been reserved
- [ 0.352799] system 00:0b: iomem range 0x0-0x9efff could not be reserved
- [ 0.352803] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
- [ 0.352806] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
- [ 0.352810] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.352814] system 00:0b: iomem range 0x100000-0xbf66d7ff could not be reserved
- [ 0.352818] system 00:0b: iomem range 0xbf66d800-0xbf6fffff has been reserved
- [ 0.352822] system 00:0b: iomem range 0xbf700000-0xbf7fffff has been reserved
- [ 0.352826] system 00:0b: iomem range 0xbf700000-0xbfefffff could not be reserved
- [ 0.352829] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
- [ 0.352833] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
- [ 0.352838] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
- [ 0.352842] system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved
- [ 0.352846] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.352849] system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved
- [ 0.352853] system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved
- [ 0.352857] system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved
- [ 0.352861] system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
- [ 0.352865] system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved
- [ 0.352869] system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved
- [ 0.387719] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
- [ 0.387725] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
- [ 0.387733] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
- [ 0.387740] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
- [ 0.387750] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
- [ 0.387755] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
- [ 0.387763] pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
- [ 0.387770] pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff
- [ 0.387780] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
- [ 0.387785] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
- [ 0.387793] pci 0000:00:1c.3: MEM window: 0xfe600000-0xfe7fffff
- [ 0.387799] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
- [ 0.387810] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
- [ 0.387814] pci 0000:00:1c.5: IO window: 0x4000-0x4fff
- [ 0.387822] pci 0000:00:1c.5: MEM window: 0xfe500000-0xfe5fffff
- [ 0.387828] pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff
- [ 0.387839] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
- [ 0.387842] pci 0000:00:1e.0: IO window: disabled
- [ 0.387850] pci 0000:00:1e.0: MEM window: 0xfe400000-0xfe4fffff
- [ 0.387856] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.387883] alloc irq_desc for 16 on node -1
- [ 0.387886] alloc kstat_irqs on node -1
- [ 0.387895] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.387903] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.387915] alloc irq_desc for 17 on node -1
- [ 0.387918] alloc kstat_irqs on node -1
- [ 0.387923] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.387929] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.387942] alloc irq_desc for 19 on node -1
- [ 0.387944] alloc kstat_irqs on node -1
- [ 0.387949] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.387956] pci 0000:00:1c.3: setting latency timer to 64
- [ 0.387969] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.387976] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.387987] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.387995] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.387999] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.388002] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
- [ 0.388005] pci_bus 0000:0b: resource 1 mem: [0xc0000000-0xc01fffff]
- [ 0.388009] pci_bus 0000:0b: resource 2 pref mem [0xc0200000-0xc03fffff]
- [ 0.388012] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
- [ 0.388016] pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
- [ 0.388019] pci_bus 0000:0c: resource 2 pref mem [0xc0400000-0xc05fffff]
- [ 0.388022] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff]
- [ 0.388026] pci_bus 0000:0d: resource 1 mem: [0xfe600000-0xfe7fffff]
- [ 0.388029] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff]
- [ 0.388032] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
- [ 0.388036] pci_bus 0000:09: resource 1 mem: [0xfe500000-0xfe5fffff]
- [ 0.388039] pci_bus 0000:09: resource 2 pref mem [0xc0600000-0xc07fffff]
- [ 0.388043] pci_bus 0000:03: resource 1 mem: [0xfe400000-0xfe4fffff]
- [ 0.388046] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
- [ 0.388049] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
- [ 0.388098] NET: Registered protocol family 2
- [ 0.388229] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.388665] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.389234] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.389523] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.389527] TCP reno registered
- [ 0.389632] NET: Registered protocol family 1
- [ 0.389658] pci 0000:00:02.0: Boot video device
- [ 0.389863] Simple Boot Flag at 0x79 set to 0x1
- [ 0.390079] cpufreq-nforce2: No nForce2 chipset.
- [ 0.390114] Scanning for low memory corruption every 60 seconds
- [ 0.390261] audit: initializing netlink socket (disabled)
- [ 0.390274] type=2000 audit(1289429058.387:1): initialized
- [ 0.402891] highmem bounce pool size: 64 pages
- [ 0.402898] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.404914] VFS: Disk quotas dquot_6.5.2
- [ 0.404994] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.405723] fuse init (API version 7.13)
- [ 0.405831] msgmni has been set to 1651
- [ 0.406101] alg: No test for stdrng (krng)
- [ 0.406169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.406173] io scheduler noop registered
- [ 0.406176] io scheduler anticipatory registered
- [ 0.406178] io scheduler deadline registered
- [ 0.406228] io scheduler cfq registered (default)
- [ 0.406451] alloc irq_desc for 24 on node -1
- [ 0.406454] alloc kstat_irqs on node -1
- [ 0.406467] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- [ 0.406482] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.406669] alloc irq_desc for 25 on node -1
- [ 0.406671] alloc kstat_irqs on node -1
- [ 0.406682] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- [ 0.406695] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.406876] alloc irq_desc for 26 on node -1
- [ 0.406878] alloc kstat_irqs on node -1
- [ 0.406888] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
- [ 0.406901] pcieport 0000:00:1c.3: setting latency timer to 64
- [ 0.407087] alloc irq_desc for 27 on node -1
- [ 0.407090] alloc kstat_irqs on node -1
- [ 0.407100] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
- [ 0.407113] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.407242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.407392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.407554] ACPI: AC Adapter [AC] (on-line)
- [ 0.407651] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- [ 0.408134] ACPI: Lid Switch [LID]
- [ 0.408195] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 0.408202] ACPI: Power Button [PBTN]
- [ 0.408262] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 0.408266] ACPI: Sleep Button [SBTN]
- [ 0.409070] ACPI: SSDT bf66e530 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.409670] ACPI: SSDT bf66dec6 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.410150] Monitor-Mwait will be used to enter C-1 state
- [ 0.410182] Monitor-Mwait will be used to enter C-2 state
- [ 0.410210] Monitor-Mwait will be used to enter C-3 state
- [ 0.410217] Marking TSC unstable due to TSC halts in idle
- [ 0.410289] processor LNXCPU:00: registered as cooling_device0
- [ 0.410701] ACPI: SSDT bf66e774 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.411102] ACPI: SSDT bf66e4ab 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.411443] Switching to clocksource hpet
- [ 0.415789] processor LNXCPU:01: registered as cooling_device1
- [ 0.424030] thermal LNXTHERM:01: registered as thermal_zone0
- [ 0.424041] ACPI: Thermal Zone [THM] (43 C)
- [ 0.425908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.427659] brd: module loaded
- [ 0.428293] loop: module loaded
- [ 0.428397] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 0.428516] ata_piix 0000:00:1f.1: version 2.13
- [ 0.428531] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.428583] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.428690] scsi0 : ata_piix
- [ 0.428776] scsi1 : ata_piix
- [ 0.429537] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
- [ 0.429541] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
- [ 0.429974] Fixed MDIO Bus: probed
- [ 0.430016] PPP generic driver version 2.4.2
- [ 0.430061] tun: Universal TUN/TAP device driver, 1.6
- [ 0.430064] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.430320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.430347] alloc irq_desc for 22 on node -1
- [ 0.430349] alloc kstat_irqs on node -1
- [ 0.430356] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 0.430372] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.430379] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.430570] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.430606] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.434544] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.434560] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
- [ 0.438499] isapnp: Scanning for PnP cards...
- [ 0.490216] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.490355] usb usb1: configuration #1 chosen from 1 choice
- [ 0.490392] hub 1-0:1.0: USB hub found
- [ 0.490406] hub 1-0:1.0: 4 ports detected
- [ 0.490488] alloc irq_desc for 20 on node -1
- [ 0.490491] alloc kstat_irqs on node -1
- [ 0.490498] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.490520] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.490525] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.490570] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.490606] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.493232] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.493293] ata2: port disabled. ignoring.
- [ 0.494505] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.494525] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
- [ 0.542033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.542191] usb usb2: configuration #1 chosen from 1 choice
- [ 0.542228] hub 2-0:1.0: USB hub found
- [ 0.542240] hub 2-0:1.0: 6 ports detected
- [ 0.542329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.542354] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.542406] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.542417] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.542422] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.542466] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.542502] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
- [ 0.542615] usb usb3: configuration #1 chosen from 1 choice
- [ 0.542652] hub 3-0:1.0: USB hub found
- [ 0.542661] hub 3-0:1.0: 2 ports detected
- [ 0.542718] alloc irq_desc for 21 on node -1
- [ 0.542721] alloc kstat_irqs on node -1
- [ 0.542728] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.542737] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.542742] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.542780] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.542819] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
- [ 0.542941] usb usb4: configuration #1 chosen from 1 choice
- [ 0.542973] hub 4-0:1.0: USB hub found
- [ 0.542981] hub 4-0:1.0: 2 ports detected
- [ 0.543040] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.543048] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.543052] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.543090] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 0.543120] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
- [ 0.543235] usb usb5: configuration #1 chosen from 1 choice
- [ 0.543271] hub 5-0:1.0: USB hub found
- [ 0.543279] hub 5-0:1.0: 2 ports detected
- [ 0.543335] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.543343] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.543347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.543384] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 0.543413] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
- [ 0.543526] usb usb6: configuration #1 chosen from 1 choice
- [ 0.543559] hub 6-0:1.0: USB hub found
- [ 0.543567] hub 6-0:1.0: 2 ports detected
- [ 0.543623] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 0.543631] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.543636] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.543677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 0.543707] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
- [ 0.543830] usb usb7: configuration #1 chosen from 1 choice
- [ 0.543862] hub 7-0:1.0: USB hub found
- [ 0.543870] hub 7-0:1.0: 2 ports detected
- [ 0.544018] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.546792] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.546804] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.546956] mice: PS/2 mouse device common for all mice
- [ 0.547124] rtc_cmos 00:03: RTC can wake from S4
- [ 0.547174] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.547210] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.547341] device-mapper: uevent: version 1.0.3
- [ 0.591195] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.609222] device-mapper: multipath: version 1.1.0 loaded
- [ 0.609227] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.609419] EISA: Probing bus 0 at eisa.0
- [ 0.609481] EISA: Mainboard TO_FFFF detected.
- [ 0.609499] Cannot allocate resource for EISA slot 1
- [ 0.609502] Cannot allocate resource for EISA slot 2
- [ 0.609505] Cannot allocate resource for EISA slot 3
- [ 0.609507] Cannot allocate resource for EISA slot 4
- [ 0.609529] EISA: Detected 0 cards.
- [ 0.617272] cpuidle: using governor ladder
- [ 0.617421] cpuidle: using governor menu
- [ 0.618004] TCP cubic registered
- [ 0.618200] NET: Registered protocol family 10
- [ 0.618799] lo: Disabled Privacy Extensions
- [ 0.619246] NET: Registered protocol family 17
- [ 0.620456] Using IPI No-Shortcut mode
- [ 0.620562] PM: Resume from disk failed.
- [ 0.620577] registered taskstats version 1
- [ 0.621376] Magic number: 2:800:754
- [ 0.621476] rtc_cmos 00:03: setting system clock to 2010-11-10 22:44:19 UTC (1289429059)
- [ 0.621480] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.621482] EDD information not available.
- [ 0.679548] ata1.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
- [ 0.679846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.698884] Freeing initrd memory: 14617k freed
- [ 0.767640] ata1.00: configured for UDMA/33
- [ 0.810965] isapnp: No Plug & Play device found
- [ 0.813357] scsi 0:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
- [ 0.825013] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- [ 0.825018] Uniform CD-ROM driver Revision: 3.20
- [ 0.825177] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 0.825254] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 0.825346] Freeing unused kernel memory: 656k freed
- [ 0.825878] Write protecting the kernel text: 4684k
- [ 0.825948] Write protecting the kernel read-only data: 1840k
- [ 0.849464] udev[92]: starting version 163
- [ 0.944077] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 0.984185] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.984207] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
- [ 0.989326] tg3.c:v3.102 (September 1, 2009)
- [ 0.989356] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.989371] tg3 0000:09:00.0: setting latency timer to 64
- [ 0.989703] ahci 0000:00:1f.2: version 3.0
- [ 0.989718] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.989760] alloc irq_desc for 28 on node -1
- [ 0.989763] alloc kstat_irqs on node -1
- [ 0.989777] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
- [ 0.989856] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
- [ 0.989861] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
- [ 0.989868] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.001592] scsi2 : ahci
- [ 1.001699] scsi3 : ahci
- [ 1.001778] scsi4 : ahci
- [ 1.002098] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 28
- [ 1.002102] ata4: DUMMY
- [ 1.002106] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 28
- [ 1.044224] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
- [ 1.046535] Linux agpgart interface v0.103
- [ 1.051977] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
- [ 1.052693] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
- [ 1.052734] ricoh-mmc: Ricoh MMC Controller disabling driver
- [ 1.052738] ricoh-mmc: Copyright(c) Philip Langdale
- [ 1.052775] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12)
- [ 1.052810] ricoh-mmc: Controller is now disabled.
- [ 1.065517] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
- [ 1.298026] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:c9:01:e9:a3
- [ 1.298030] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
- [ 1.298033] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
- [ 1.298036] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 1.314726] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.320074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.320105] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.323133] Initializing USB Mass Storage driver...
- [ 1.323263] scsi5 : SCSI emulation for USB Mass Storage devices
- [ 1.323367] usbcore: registered new interface driver usb-storage
- [ 1.323370] USB Mass Storage support registered.
- [ 1.323376] usb-storage: device found at 2
- [ 1.323378] usb-storage: waiting for device to settle before scanning
- [ 1.365730] ata3.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
- [ 1.365736] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
- [ 1.366733] ata3.00: configured for UDMA/133
- [ 1.380336] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5
- [ 1.380529] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 1.380553] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 1.380635] sd 2:0:0:0: [sda] Write Protect is off
- [ 1.380638] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.380671] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.380897] sda: sda1 sda2 sda3 < sda5 sda6
- [ 1.424054] usb 2-3: new high speed USB device using ehci_hcd and address 3
- [ 1.432570] sda7 > sda4
- [ 1.433111] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 1.466260] sdhci: Secure Digital Host Controller Interface driver
- [ 1.466264] sdhci: Copyright(c) Pierre Ossman
- [ 1.466848] [drm] Initialized drm 1.1.0 20060810
- [ 1.467995] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
- [ 1.468038] alloc irq_desc for 18 on node -1
- [ 1.468041] alloc kstat_irqs on node -1
- [ 1.468050] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 1.470246] Registered led device: mmc0::
- [ 1.471331] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
- [ 1.475871] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.496628] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.496634] i915 0000:00:02.0: setting latency timer to 64
- [ 1.501143] alloc irq_desc for 29 on node -1
- [ 1.501147] alloc kstat_irqs on node -1
- [ 1.501158] i915 0000:00:02.0: irq 29 for MSI/MSI-X
- [ 1.501166] [drm] set up 7M of stolen space
- [ 1.557027] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
- [ 1.562338] usb 2-3: configuration #1 chosen from 1 choice
- [ 1.562770] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 1.562965] usb-storage: device found at 3
- [ 1.562968] usb-storage: waiting for device to settle before scanning
- [ 1.632896] composite sync not supported
- [ 1.633037] [drm] initialized overlay support
- [ 1.836051] usb 2-6: new high speed USB device using ehci_hcd and address 5
- [ 1.970112] usb 2-6: configuration #1 chosen from 1 choice
- [ 2.029436] composite sync not supported
- [ 2.060155] firewire_core: created device fw0: GUID 464fc0000d9de438, S400
- [ 2.207852] fb0: inteldrmfb frame buffer device
- [ 2.207855] registered panic notifier
- [ 2.212276] usb 3-2: new full speed USB device using uhci_hcd and address 2
- [ 2.222844] acpi device:34: registered as cooling_device2
- [ 2.223273] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
- [ 2.223318] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
- [ 2.223387] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
- [ 2.223473] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input6
- [ 2.223510] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
- [ 2.223535] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.225690] vga16fb: initializing
- [ 2.225694] vga16fb: mapped to 0xc00a0000
- [ 2.225698] vga16fb: not registering due to another framebuffer present
- [ 2.388724] usb 3-2: configuration #1 chosen from 1 choice
- [ 2.390677] hub 3-2:1.0: USB hub found
- [ 2.392625] hub 3-2:1.0: 3 ports detected
- [ 2.576730] Console: switching to colour frame buffer device 160x50
- [ 2.636243] usb 6-2: new low speed USB device using uhci_hcd and address 2
- [ 2.811693] usb 6-2: configuration #1 chosen from 1 choice
- [ 2.826675] usbcore: registered new interface driver hiddev
- [ 2.839847] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input7
- [ 2.839968] generic-usb 0003:1D57:0008.0001: input,hidraw0: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:1d.1-2/input0
- [ 2.839995] usbcore: registered new interface driver usbhid
- [ 2.839998] usbhid: v2.6:USB HID core driver
- [ 2.957468] composite sync not supported
- [ 2.958631] usb 3-2.1: new full speed USB device using uhci_hcd and address 3
- [ 3.085831] usb 3-2.1: configuration #1 chosen from 1 choice
- [ 3.161684] usb 3-2.2: new full speed USB device using uhci_hcd and address 4
- [ 3.291789] usb 3-2.2: configuration #1 chosen from 1 choice
- [ 3.298022] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input8
- [ 3.298114] generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
- [ 3.370681] usb 3-2.3: new full speed USB device using uhci_hcd and address 5
- [ 3.422268] xor: automatically using best checksumming function: pIII_sse
- [ 3.440021] pIII_sse : 6530.000 MB/sec
- [ 3.440023] xor: using function: pIII_sse (6530.000 MB/sec)
- [ 3.444450] device-mapper: dm-raid45: initialized v0.2594b
- [ 3.502829] usb 3-2.3: configuration #1 chosen from 1 choice
- [ 3.510080] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input9
- [ 3.510202] generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
- [ 3.692519] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 6.320334] usb-storage: device scan complete
- [ 6.321099] scsi 5:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
- [ 6.321925] sd 5:0:0:0: Attached scsi generic sg2 type 0
- [ 6.323181] sd 5:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB)
- [ 6.323672] sd 5:0:0:0: [sdb] Write Protect is off
- [ 6.323677] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
- [ 6.323681] sd 5:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.325801] sd 5:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.325806] sdb:
- [ 6.560358] usb-storage: device scan complete
- [ 6.560950] scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
- [ 6.561419] sd 6:0:0:0: Attached scsi generic sg3 type 0
- [ 6.562053] sd 6:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
- [ 6.562690] sd 6:0:0:0: [sdc] Write Protect is off
- [ 6.562693] sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
- [ 6.562696] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 6.564199] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 6.564203] sdc: sdc1
- [ 6.623306] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 6.623310] sd 6:0:0:0: [sdc] Attached SCSI disk
- [ 6.950953] sdb1
- [ 6.952338] sd 5:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.952343] sd 5:0:0:0: [sdb] Attached SCSI removable disk
- [ 30.869527] udev[475]: starting version 163
- [ 31.109046] Adding 1943824k swap on /dev/sda6. Priority:-1 extents:1 across:1943824k
- [ 31.276380] lp: driver loaded but no devices found
- [ 31.376002] cfg80211: Calling CRDA to update world regulatory domain
- [ 31.377778] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- [ 31.458967] Linux video capture interface: v2.00
- [ 31.459137] Bluetooth: Core ver 2.15
- [ 31.472351] NET: Registered protocol family 31
- [ 31.472355] Bluetooth: HCI device and connection manager initialized
- [ 31.472359] Bluetooth: HCI socket layer initialized
- [ 31.499604] cfg80211: World regulatory domain updated:
- [ 31.499608] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 31.499612] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 31.499616] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 31.499619] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 31.499623] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 31.499626] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 31.523138] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 31.524012] usbcore: registered new interface driver btusb
- [ 31.532215] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
- [ 31.533088] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
- [ 31.534131] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10
- [ 31.534462] usbcore: registered new interface driver uvcvideo
- [ 31.535129] USB Video Class driver (v0.1.0)
- [ 31.542055] input: Dell WMI hotkeys as /devices/virtual/input/input11
- [ 31.586268] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
- [ 31.616291] type=1505 audit(1289416490.494:2): operation="profile_load" pid=817 name="/sbin/dhclient3"
- [ 31.617218] type=1505 audit(1289416490.494:3): operation="profile_load" pid=817 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 31.617707] type=1505 audit(1289416490.494:4): operation="profile_load" pid=817 name="/usr/lib/connman/scripts/dhclient-script"
- [ 31.793321] phy0: Selected rate control algorithm 'minstrel'
- [ 31.794295] Registered led device: b43-phy0::tx
- [ 31.794318] Registered led device: b43-phy0::rx
- [ 31.794340] Registered led device: b43-phy0::radio
- [ 31.794433] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
- [ 31.821909] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input12
- [ 31.839430] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input13
- [ 32.794061] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 32.794093] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 33.087561] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
- [ 33.320210] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 33.320316] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
- [ 33.320393] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
- [ 33.391130] type=1505 audit(1289416492.266:5): operation="profile_load" pid=1353 name="/usr/share/gdm/guest-session/Xsession"
- [ 33.393521] type=1505 audit(1289416492.270:6): operation="profile_replace" pid=1354 name="/sbin/dhclient3"
- [ 33.394441] type=1505 audit(1289416492.270:7): operation="profile_replace" pid=1354 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 33.394942] type=1505 audit(1289416492.270:8): operation="profile_replace" pid=1354 name="/usr/lib/connman/scripts/dhclient-script"
- [ 33.404029] type=1505 audit(1289416492.282:9): operation="profile_load" pid=1360 name="/usr/bin/evince"
- [ 33.416373] type=1505 audit(1289416492.294:10): operation="profile_load" pid=1360 name="/usr/bin/evince-previewer"
- [ 33.420105] b43 ssb0:0: firmware: requesting b43/ucode5.fw
- [ 33.421053] type=1505 audit(1289416492.298:11): operation="profile_load" pid=1367 name="/usr/lib/cups/backend/cups-pdf"
- [ 33.460382] b43 ssb0:0: firmware: requesting b43/pcm5.fw
- [ 33.462426] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
- [ 33.464485] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
- [ 33.580074] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
- [ 33.609347] ppdev: user-space parallel port driver
- [ 33.622258] NET: Registered protocol family 15
- [ 33.680867] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 33.682888] alloc irq_desc for 30 on node -1
- [ 33.682892] alloc kstat_irqs on node -1
- [ 33.682927] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
- [ 33.718907] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 33.981530] composite sync not supported
- [ 33.997371] alg: No test for cipher_null (cipher_null-generic)
- [ 33.997415] alg: No test for ecb(cipher_null) (ecb-cipher_null)
- [ 33.997455] alg: No test for digest_null (digest_null-generic)
- [ 33.997492] alg: No test for compress_null (compress_null-generic)
- [ 34.031367] padlock: VIA PadLock Hash Engine not detected.
- [ 34.057376] padlock: VIA PadLock Hash Engine not detected.
- [ 34.119063] padlock: VIA PadLock not detected.
- [ 34.453402] composite sync not supported
- [ 36.345564] composite sync not supported
- [ 36.872043] composite sync not supported
- [ 37.313240] composite sync not supported
- [ 37.733300] composite sync not supported
- [ 38.698748] vboxdrv: Trying to deactivate the NMI watchdog permanently...
- [ 38.698753] vboxdrv: Successfully done.
- [ 38.698756] vboxdrv: Found 2 processor cores.
- [ 38.699447] vboxdrv: fAsync=0 offMin=0x1d0 offMax=0x8b8
- [ 38.700276] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 38.700280] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
- [ 40.605980] Bluetooth: L2CAP ver 2.14
- [ 40.605984] Bluetooth: L2CAP socket layer initialized
- [ 40.769370] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 40.769375] Bluetooth: BNEP filters: protocol multicast
- [ 40.774972] Bluetooth: SCO (Voice Link) ver 0.6
- [ 40.774975] Bluetooth: SCO socket layer initialized
- [ 40.925313] Bluetooth: RFCOMM TTY layer initialized
- [ 40.925319] Bluetooth: RFCOMM socket layer initialized
- [ 40.925322] Bluetooth: RFCOMM ver 1.11
- [ 41.132381] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 41.262229] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 41.263057] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- [ 41.263060] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- [ 41.263063] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- [ 188.342502] composite sync not supported
- [ 188.761436] composite sync not supported
- [ 189.166478] composite sync not supported
- [ 189.569343] composite sync not supported
- [ 190.729242] composite sync not supported
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement