fgf

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# for Routing
auto vmbr1
iface vmbr1 inet manual
	bridge_ports dummy0
	bridge_stp off
	bridge_fd 0


# vmbr0: Bridging. Make sure to use only MAC adresses that were assigned to you.
auto vmbr0
iface vmbr0 inet static
	address 145.239.130.110
	netmask 255.255.255.0
	network 145.239.130.0
	broadcast 145.239.130.255
	gateway 145.239.130.254
	bridge_ports eth1
	bridge_stp off
	bridge_fd 0
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
 post-up iptables -t nat -A POSTROUTING -s '145.239.130.0/24' -o vmbr0 -j MASQUERADE
    post-down iptables -t nat -D POSTROUTING -s '145.239.130.0/24' -o vmbr0 -j MASQUERADE


iface vmbr0 inet6 static
	address 2001:41d0:0303:376e::
	netmask 64
	post-up /sbin/ip -f inet6 route add 2001:41d0:0303:37ff:ff:ff:ff:ff dev vmbr0
	post-up /sbin/ip -f inet6 route add default via 2001:41d0:0303:37ff:ff:ff:ff:ff
	pre-down /sbin/ip -f inet6 route del default via 2001:41d0:0303:37ff:ff:ff:ff:ff
	pre-down /sbin/ip -f inet6 route del 2001:41d0:0303:37ff:ff:ff:ff:ff dev vmbr0