TSS - Ford Lightning Repairs

2021-11-30 14:28:55 ★ Cletus Taylor walks over to the toolbox, pressing his foot against the brake pedal; disabling it.
2021-11-30 14:29:06 ★ Cletus Taylor grips the toolbox, proceeding to roll it across the room to the Ford.
2021-11-30 14:30:04 ★ Cletus Taylor crouches down, proceeding to open the drawer; then withdraws a Snap-On ratchet.
2021-11-30 14:30:30 ★ Cletus Taylor crouches down, continuing to slowly lay himself down on the floor then slides underneath ---
2021-11-30 14:30:36 ★ the Ford's front-end.      ((Cletus Taylor))
2021-11-30 14:31:09 ★ Cletus Taylor looks around underneath the front-end of the Ford, eventually locating two bolts on ---
2021-11-30 14:31:33 ★ each side of the F150's frame rails, securing the crash bar to each frame rail.      ((Cletus Taylor))
2021-11-30 14:31:58 ★ Cletus Taylor reaches over towards one of the bolts, connecting the socket on their ratchet; then ---
2021-11-30 14:32:06 ★ begins to loosen the bolt.      ((Cletus Taylor))
2021-11-30 14:32:28 ★ Cletus Taylor would then move onto the next bolt, eventually removing all four of the bolts securing ---
2021-11-30 14:32:37 ★ the bent-in crash bar.      ((Cletus Taylor))
2021-11-30 14:33:00 ★ Cletus Taylor slides himself out from underneath the F-150, then steps over towards the toolbox.
2021-11-30 14:33:16 ★ Cletus Taylor places the ratchet down ontop of the box, proceeding to take hold of a plastic clip ---
2021-11-30 14:33:25 ★ remover tool, then heads to the side of the F-150.      ((Cletus Taylor))
2021-11-30 14:33:51 ★ Cletus Taylor reaches between the wheel and the fender, carefully popping out each plastic pin ---
2021-11-30 14:34:07 ★ on the splash guard, then moves onto the opposite side; doing the same.      ((Cletus Taylor))
2021-11-30 14:34:29 ★ Cletus Taylor pockets the pins, along with the remover tool; then walks over to the front-end of the truck
2021-11-30 14:34:49 ★ Cletus Taylor grabs ahold of the front-bumper, carefully pulling on it in order to pop each of the ---
2021-11-30 14:35:18 ★ tabs on the bumper off of the truck's body itself; thus fully removing the broken ---      ((Cletus Taylor))
2021-11-30 14:35:22 ★ front bumper cover.      ((Cletus Taylor))
2021-11-30 14:35:37 ★ Cletus Taylor places the cover aside, proceeding to head back to the F-150.
2021-11-30 14:36:02 ★ Cletus Taylor grips the bent crash-bar, proceeding to tug on it; removing it from the frame rails.
2021-11-30 14:36:31 ★ Cletus Taylor places the bumper bar down next to the mangled bumper.
2021-11-30 14:37:00 ★ Cletus Taylor walks over to the industrial shelf, taking hold of two boxes' then carefully lifts them ---
2021-11-30 14:37:05 ★ up headed towards the truck.      ((Cletus Taylor))
2021-11-30 14:37:22 ★ Cletus Taylor places both boxes on the floor, proceeding to take out their boxcutter; quickly ---
2021-11-30 14:37:31 ★ cutting the taped edges open, then opens the boxes.      ((Cletus Taylor))
2021-11-30 14:37:35 * Cletus Taylor dropped a Ford OE 1L3Z17D957BB Front Bumper Cover. *
2021-11-30 14:37:38 * Cletus Taylor dropped a Ford OE YL3Z17757CAA Front Bumper Face/Impact Bar. *
2021-11-30 14:37:56 ★ Cletus Taylor reaches into the one box, taking hold of the new impact bar, then slides it out.
2021-11-30 14:38:15 ★ Cletus Taylor visually inspects the bar, not noticing any blemishes on it; shrugging.
2021-11-30 14:38:20 [Southern Accent] Cletus Taylor says: Awl'righty.
2021-11-30 14:38:37 ★ Cletus Taylor carefully positions the bumper bar into position on the frame rails, slowly pushing it i n.
2021-11-30 14:38:53 ★ Cletus Taylor crouches down, proceeding to slide himself underneath the F-150.
2021-11-30 14:39:15 ★ Cletus Taylor continues to hold the bar in position with one hand, carefully adjusting it until the four -
2021-11-30 14:39:33 ★ bolt holes align with eachother, then quickly hand-threads the four bolts into the holes.      ((Cletus Taylor))
2021-11-30 14:39:55 ★ Cletus Taylor releases the now loosely connected crash bar, proceeding to slide himself out from ---
2021-11-30 14:40:09 ★ underneath the truck immediately headed to the toolbox.      ((Cletus Taylor))
2021-11-30 14:40:21 ★ Cletus Taylor takes hold of their ratchet, then heads back to the truck.
2021-11-30 14:40:41 ★ Cletus Taylor crouches back down, proceeding to head back underneath the F-150.
2021-11-30 14:40:57 ★ Cletus Taylor reaches up towards one of the four bolts, quickly tightenign it down with the ratchet; ---
2021-11-30 14:41:07 ★ then moves onto the next, eventually tightening down all four.      ((Cletus Taylor))
2021-11-30 14:41:23 ★ Cletus Taylor slides himself out from underneath the F-150, proceeding to dust his hands off.
2021-11-30 14:41:54 ★ Cletus Taylor steps over towards the two boxes, taking hold of the pre-painted bumper; carefully - --
2021-11-30 14:41:58 ★ sliding it out of the box.      ((Cletus Taylor))
2021-11-30 14:42:20 ★ Cletus Taylor visually inspects the bumper, insuring the paint has no scratches or chips in it; then ---
2021-11-30 14:42:23 ★ turns around.      ((Cletus Taylor))
2021-11-30 14:42:49 ★ Cletus Taylor carefully places the bumper against the front-end of the F-150, slowly aligning it into ---
2021-11-30 14:43:03 ★ its OEM position; then begins pressing on the edges in order to snap the plastic ---      ((Cletus Taylor))
2021-11-30 14:44:04 ★ tabs into position, securing the bumper into position.      ((Cletus Taylor))
2021-11-30 14:44:35 ★ Cletus Taylor walks to either side of the F-150, proceeding to slip the plastic pins from his pocket, ---
2021-11-30 14:44:53 ★ inserting them into the holes in order to secure the splash guard to the bumper.      ((Cletus Taylor))
2021-11-30 14:45:07 ★ Cletus Taylor dusts his hands off, proceeding to take a step back, admiring his work.