Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ~ #
- ~ # ырщц
- /bin/sh: ырщц: not found
- ~ #
- ~ #
- ~ #
- ~ # ,
- /bin/sh: ,: not found
- ~ # cat /proc/cpuinfo
- system type : MT7628
- processor : 0
- cpu model : MIPS 24Kc V5.5
- BogoMIPS : 386.04
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0930, 0x0988, 0x0348]
- ASEs implemented : mips16 dsp
- shadow register sets : 1
- core : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- ~ # cat /proc/
- 1/ 635/ 832/ diskstats net/
- 1003/ 640/ 837/ driver/ pagetypeinfo
- 1004/ 645/ 840/ execdomains partitions
- 1005/ 650/ 843/ filesystems self/
- 1006/ 655/ 939/ fs/ slabinfo
- 1007/ 660/ 940/ interrupts softirqs
- 1008/ 678/ 941/ iomem stat
- 1009/ 69/ 956/ ioports sys/
- 1010/ 7/ 960/ irq/ sysrq-trigger
- 1011/ 71/ 963/ kallsyms sysvipc/
- 1020/ 710/ 964/ kmsg timer_list
- 1034/ 727/ 965/ kpagecount tplink/
- 2/ 728/ 967/ kpageflags tty/
- 3/ 731/ 980/ loadavg uptime
- 4/ 734/ 983/ locks url_list
- 42/ 821/ buddyinfo meminfo version
- 44/ 822/ bus/ misc vmallocinfo
- 46/ 823/ cmdline modules vmstat
- 5/ 829/ cpuinfo mounts zoneinfo
- 6/ 830/ crypto mt7628/
- 630/ 831/ devices mtd
- ~ # cat /proc/tplink/
- eth_forward led_internet led_wlan_24G
- eth_wanPort_status led_sys
- ~ # cat /proc/tplink/
- eth_forward led_internet led_wlan_24G
- eth_wanPort_status led_sys
- ~ # cat /proc/tplink/eth_wanPort_status
- 0
- ~ # cat /proc/version
- Linux version 2.6.36 (root@TimLinux) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #4 Tue Nov 21 17:27:18 CST 2017
- ~ # reboot
- The system is going down NOW!
- Sent SIGTERM to all processes
- Terminated
- ~ # sh: can't create /proc/tplink/echan: nonexistent directory
- sh: can't create /proc/tplink/echan: nonexistent directory
- Sent SIGKILL toRestarting system.
- [04000D07][04000D08]
- DDR Calibration DQS reg = 00008887
- U-Boot 1.1.3 (Nov 21 2017 - 17:26:54)
- Board: Ralink APSoC DRAM: 64 MB
- relocate_code Pointer at: 83fb4000
- ******************************
- Software System Reset Occurred
- ******************************
- gpiomode2 05540554.
- gpiomode2 00000000.
- gpiomode2 05550555.
- flash manufacture id: c8, device id 40 17
- find flash: GD25Q64B
- ============================================
- Ralink UBoot Version: 4.3.0.0
- --------------------------------------------
- ASIC 7628_MP (Port5<->None)
- DRAM component: 512 Mbits DDR, width 16
- DRAM bus: 16 bit
- Total memory: 64 MBytes
- Flash component: SPI Flash
- Date:Nov 21 2017 Time:17:26:54
- ============================================
- icache: sets:512, ways:4, linesz:32 ,total:65536
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 580 MHZ ####
- estimate memory size =64 Mbytes
- RESET MT7628 PHY!!!!!!
- continue to starting system. 0
- disable switch phyport...
- 3: System Boot system code via Flash.(0xbc020000)
- do_bootm:argc=2, addr=0xbc020000
- ## Booting image at bc020000 ...
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 8000c150) ...
- ## Giving linux memsize in MB, 64
- Starting kernel ...
- ?----fff--~--~fx---?-?-f----f----f-f---Linux version 2.6.36 (root@TimLinux) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #4 Tue Nov 21 17:27:18 CST 2017
- The CPU feqenuce set to 575 MHz
- MIPS CPU sleep mode enabled.
- CPU revision is: 00019655 (MIPS 24Kc)
- Software DMA cache coherency
- Determined physical RAM map:
- memory: 04000000 @ 00000000 (usable)
- Initrd not found or empty - disabling initrd
- Zone PFN ranges:
- Normal 0x00000000 -> 0x00004000
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0x00000000 -> 0x00004000
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- Kernel command line: console=ttyS1,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init
- PID hash table entries: 256 (order: -2, 1024 bytes)
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- Writing ErrCtl register=00040000
- Readback ErrCtl register=00040000
- Memory: 61260k/65536k available (2634k kernel code, 4276k reserved, 639k data, 164k init, 0k highmem)
- NR_IRQS:128
- console [ttyS1] enabled
- Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
- pid_max: default: 4096 minimum: 301
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- bio: create slab <bio-0> at 0
- Switching to clocksource Ralink Systick timer
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 2048 bind 2048)
- TCP reno registered
- NET: Registered protocol family 1
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- fuse init (API version 7.15)
- msgmni has been set to 119
- io scheduler noop registered
- io scheduler deadline registered (default)
- Ralink gpio driver initialized
- i2cdrv_major = 218
- Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
- serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A
- serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
- brd: module loaded
- flash manufacture id: c8, device id 40 17
- GD25Q64B(c8 40170000) (8192 Kbytes)
- mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- Creating 7 MTD partitions on "raspi":
- 0x000000000000-0x000000020000 : "boot"
- 0x000000020000-0x000000160000 : "kernel"
- 0x000000160000-0x0000007c0000 : "rootfs"
- mtd: partition "rootfs" set to be root filesystem
- 0x0000007c0000-0x0000007d0000 : "config"
- 0x0000007d0000-0x0000007e0000 : "romfile"
- 0x0000007e0000-0x0000007f0000 : "ISPconfig"
- 0x0000007f0000-0x000000800000 : "radio"
- Register flash device:flash0
- PPP generic driver version 2.4.2
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- Mirror/redirect action on
- u32 classifier
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (957 buckets, 3828 max)
- ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
- TCP cubic registered
- NET: Registered protocol family 10
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- Ebtables v2.0 registered
- starting pid 679, tty '': '/etc/init.d/rcS'
- rdm_major = 253
- spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
- Read MAC from flash(0x7DF100) ffffffc4-71-54-ffffffb6-fffffff9-ffffffe2
- GMAC1_MAC_ADRH -- : 0x0000c471
- GMAC1_MAC_ADRL -- : 0x54b6f9e2
- Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500!
- NAPI enable, Tx Ring = 256, Rx Ring = 256
- spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
- Read MAC from flash(0x7DF100) ffffffc4-71-54-ffffffb6-fffffff9-ffffffe2
- GMAC1_MAC_ADRH -- : 0x0000c471
- GMAC1_MAC_ADRL -- : 0x54b6f9e2
- PROC INIT OK!
- tp_domain init ok
- L2TP core driver, V2.0
- PPPoL2TP kernel driver, V2.0
- Set: phy[0].reg[0] = 3900
- Set: phy[1].reg[0] = 3900
- Set: phy[2].reg[0] = 3900
- Set: phy[3].reg[0] = 3900
- Set: phy[4].reg[0] = 3900
- Set: phy[0].reg[0] = 3300
- Set: phy[1].reg[0] = 3300
- Set: phy[2].reg[0] = 3300
- Set: phy[3].reg[0] = 3300
- Set: phy[4].reg[0] = 3300
- resetMiiPortV over.
- starting pid 728, tty '/dev/ttyS1': '/bin/sh'
- ~ # [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
- spiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000
- [ oal_sys_readCfgFlash ] 1029: User config length is too long - ffffffff
- [ dm_loadCfg ] 2302: Read config from flash failed. ret = 1
- [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/default_config.xml!, about to open file /etc/default_config.xml
- [ parseConfigNode ] 525: Meet unrecognized object node "PhDDNSCfg", skip the node
- [ parseConfigNode ] 530: Meet unrecognized parameter node "PhDDNSCfg", skip the node
- [ parseConfigNode ] 525: Meet unrecospiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
- gnized object nospiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4
- de "SnmpCfg", skspiflash_ioctl_read, Read from 0x007df300 length 0x4, ret 0, retlen 0x4
- ip the node
- [ pspiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
- arseConfigNode ]spiflash_ioctl_read, Read from 0x00020000 length 0x1d0, ret 0, retlen 0x1d0
- 525: Meet unrespiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
- cognized object node "ACL", skip the node
- [ parseConfigNode ] 530: Meet unrecognized parameter node "ACL", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_WANUSB3gLinkConfig", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "QueueManagement", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_IPTV", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "VoiceService", skip the node
- [ parseConfigNode ] 530: Meet unrecognized parameter node "VoiceService", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "StorageService", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_SpeedDialCfg", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_MultiIspDialPlan", skip the node
- [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_CallLogCfg", skip the node
- [ rsl_getManagementServerObj ] 355: cannot set connectionRequestURL yet because no WAN intf is up
- [ rsl_getManagementServerObj ] 355: cannot set connectionRequestURL yet because no WAN intf is up
- [ rsl_getManagementServerObj ] 355: cannot set connectionRequestURL yet because no WAN intf is up
- sendto: No such file or directory
- pid 727 send 2001 error
- [ oal_sys_getOldTZInfo ] 467: Open TZ file error!
- ioctl: No such device
- Raeth v3.1 (NAPI
- ,SkbRecycle)
- phy_tx_ring = 0x030d0000, tx_ring = 0xa30d0000
- phy_rx_ring0 = 0x030d1000, rx_ring0 = 0xa30d1000
- [fe_sw_init:5120]rt305x_esw_init.
- disable switch phyport...
- GMAC1_MAC_ADRH -- : 0x0000c471
- GMAC1_MAC_ADRL -- : 0x54b6f9e2
- RT305x_ESW: Link Status Changed
- [ rsl_getUnusedVlan ] 1008: GET UNUSED VLAN TAG 1 : [3]
- [ rsl_getUnusedVlan ] 1008: GET UNUSED VLAN TAG 2 : [4]
- [ rsl_getUnusedVlan ] 1008: GET UNUSED VLAN TAG 3 : [5]
- [ rsl_getUnusedVlan ] 1008: GET UNUSED VLAN TAG 4 : [6]
- set if eth0.3 to *not wan dev
- set if eth0.4 to *not wan dev
- set if eth0.5 to *not wan dev
- set if eth0.6 to *not wan dev
- set if eth0.2 to wan dev
- [ vlan_addLanPortsIntoBridge ] 495: add lan Port 255 device eth0.3 entered promiscuous mode
- from br0
- device eth0 entered promiscuous mode
- br0: port 1(eth0.3) entering forwarding state
- br0: port 1(eth0.3) entering forwarding state
- device eth0.4 entered promiscuous mode
- br0: port 2(eth0.4) entering forwarding state
- br0: port 2(eth0.4) entering forwarding state
- device eth0.5 entered promiscuous mode
- br0: port 3(eth0.5) entering forwarding state
- br0: port 3(eth0.5) entering forwarding state
- device eth0.6 entered promiscuous mode
- br0: port 4(eth0.6) entering forwarding state
- br0: port 4(eth0.6) entering forwarding state
- ra0 no private ioctls.
- ADDRCONF(NETDEV_CHANGE): eth0.4: link becomes ready
- ADDRCONF(NETDEV_CHANGE): eth0.5: link becomes ready
- ADDRCONF(NETDEV_CHANGE): eth0.6: link becomes ready
- ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
- === pAd = c0839000, size = 1486720 ===
- <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
- <-- RTMPAllocAdapterBlock, Status=0
- RtmpChipOpsHook(492): Not support for HIF_MT yet!
- mt7628_init()-->
- mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
- e2.bin mt7628_init(1135)::(2), pChipCap->fw_len(63888)
- mt_bcn_buf_init(218): Not support for HIF_MT yet!
- <--mt7628_init()
- TX_BCN DESC a32a9000 size = 320
- RX[0] DESC a32ad000 size = 2048
- RX[1] DESC a32b0000 size = 2048
- cfg_mode=9
- cfg_mode=9
- wmode_band_equal(): Band Equal!
- AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
- APSDCapable[0]=0
- APSDCapable[1]=0
- APSDCapable[2]=0
- APSDCapable[3]=0
- APSDCapable[4]=0
- APSDCapable[5]=0
- APSDCapable[6]=0
- APSDCapable[7]=0
- APSDCapable[8]=0
- APSDCapable[9]=0
- APSDCapable[10]=0
- APSDCapable[11]=0
- APSDCapable[12]=0
- APSDCapable[13]=0
- APSDCapable[14]=0
- APSDCapable[15]=0
- default ApCliAPSDCapable[0]=0
- Key1Str is Invalid key length(0) or Type(0)
- Key1Str is Invalid key length(0) or Type(0)
- Key2Str is Invalid key length(0) or Type(0)
- Key2Str is Invalid key length(0) or Type(0)
- Key3Str is Invalid key length(0) or Type(0)
- Key3Str is Invalid key length(0) or Type(0)
- Key4Str is Invalid key length(0) or Type(0)
- Key4Str is Invalid key length(0) or Type(0)
- WscKeyASCII=8
- WscKeyASCII=8
- [RTMPReadParametersHook:297]wifi read profile faild.
- load fw image from fw_header_image
- AndesMTLoadFwMethod1(2239)::pChipCap->fw_len(63888)
- FW Version:20151201
- FW Build Date:20151201183641
- CmdAddressLenReq:(ret = 0)
- CmdFwStartReq: override = 1, address = 1048576
- CmdStartDLRsp: WiFI FW Download Success
- MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
- efuse_probe: efuse = 10000012
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
- RtmpEepromGetDefault::e2p_dafault=2
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
- NVM is FLASH mode
- 1. Phy Mode = 14
- exec!
- spiflash_ioctl_read, Read from 0x007f0000 length 0x400, ret 0, retlen 0x400
- eeFlashId = 0x7628!
- Country Region from e2p = ffff
- tssi_1_target_pwr_g_band = 36
- 2. Phy Mode = 14
- 3. Phy Mode = 14
- NICInitPwrPinCfg(11): Not support for HIF_MT yet!
- NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
- mt_mac_init()-->
- MtAsicInitMac()-->
- mt7628_init_mac_cr()-->
- MtAsicSetMacMaxLen(1299): Set the Max RxPktLen=450!
- <--mt_mac_init()
- WTBL Segment 1 info:
- MemBaseAddr/FID:0x28000/0
- EntrySize/Cnt:32/128
- WTBL Segment 2 info:
- MemBaseAddr/FID:0x40000/0
- EntrySize/Cnt:64/128
- WTBL Segment 3 info:
- MemBaseAddr/FID:0x42000/64
- EntrySize/Cnt:64/128
- WTBL Segment 4 info:
- MemBaseAddr/FID:0x44000/128
- EntrySize/Cnt:32/128
- AntCfgInit(2947): Not support for HIF_MT yet!
- MCS Set = ff ff 00 00 01
- MtAsicSetChBusyStat(883): Not support for HIF_MT yet!
- current bandwidth 0, ctrl channel 1, central channel 1
- current bandwidth 0, ctrl channel 2, central channel 2
- current bandwidth 0, ctrl channel 3, central channel 3
- current bandwidth 0, ctrl channel 4, central channel 4
- CmdSlotTimeSet:(ret = 0)
- current bandwidth 0, ctrl channel 5, central channel 5
- current bandwidth 0, ctrl channel 6, central channel 6
- current bandwidth 0, ctrl channel 7, central channel 7
- current bandwidth 0, ctrl channel 8, central channel 8
- current bandwidth 0, ctrl channel 9, central channel 9
- current bandwidth 0, ctrl channel 10, central channel 10
- current bandwidth 0, ctrl channel 11, central channel 11
- current bandwidth 0, ctrl channel 12, central channel 12
- current bandwidth 0, ctrl channel 13, central channel 13
- [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
- MtAsicSetRalinkBurstMode(3078): Not support for HIF_MT yet!
- MtAsicSetPiggyBack(818): Not support for HIF_MT yet!
- current bandwidth 1, ctrl channel 11, central channel 9
- Find the right list in SingleSkuPwrList, start_ch:3, ch_num: 9
- Find the right list in SingleSkuPwrList, start_ch:3, ch_num: 9
- reload DPD from flash , 0x9F = [ca00] doReload bit7[0]
- CmdLoadDPDDataFromFlash: Channel = 11, DoReload = 0
- MtAsicSetTxPreamble(3057): Not support for HIF_MT yet!
- MtAsicAddSharedKeyEntry(1366): Not support for HIF_MT yet!
- The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
- MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = c4:71:54:b6:f9:e2
- <==== rt28xx_init, Status=0
- @@@ ed_monitor_init : ===>
- @@@ ed_monitor_init : <===
- mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1
- WiFi Startup Cost (ra0): 3.492s
- ====
- @@@ ed_status_read: EDCCA TH - H
- pAd->ed_trigger_cnt : 0 > 20 || pAd->ed_big_rssi_stat : 0 < 50
- ====
- device ra0 entered promiscuous mode
- br0: port 5(ra0) entering forwarding state
- br0: port 5(ra0) entering forwarding state
- device apcli0 entered promiscuous mode
- brctl: bridge br0: Device or resource busy
- device ra1 entered promiscuous mode
- spiflash_ioctl_read, Read from 0x007f0000 length 0x2, ret 0, retlen 0x2
- WLAN-Start wlNetlinkTool
- Waiting for Wireless Events from interfaces...
- swWlanChkAhbErr: netlink to do
- sendto: No such file or directory
- pid 727 send 2030 error
- wscd: SSDP UDP PORT = 1900
- sendto: No such file or directory
- pid 727 send 2004 error
- mldProxy# file: src/mld_ifinfo.c;line: 102; error = No such file or directory
- mldProxy# Err: get LLA failed
- brctl: bridge br0: Invalid argument
- iptables: Bad rule (does a matching rule exist in that chain?).
- radvd starting
- [Jan 01 03:00:07] radvd: no linklocal address configured for br0
- [Jan 01 03:00:07] radvd: error parsing or activating the config file: /var/tmp/dconf/radvd_br0.conf
- [ getPidFromPidFile ] 112: Cann't open file: /var/run/zebra.pid.
- [ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid.
- iptables: No chain/target/match by that name.
- iptables: Bad rule (does a matching rule exist in that chain?).
- iptables: Bad rule (does a matching rule exist in that chain?).
- iptables: Bad rule (does a matching rule exist in that chain?).
- ip6tables: Bad rule (does a matching rule exist in that chain?).
- iptables: Bad rule (does a matching rule exist in that chain?).
- iptables: Bad rule (does a matching rule exist in that chain?).
- iptables: Bad rule (does a matching rule exist in that chain?).
- nf_nat_rtsp v0.6.21 loading
- enable switch phyport...
- Set: phy[0].reg[0] = 3900
- Set: phy[1].reg[0] = 3900
- Set: phy[2].reg[0] = 3900
- Set: phy[3].reg[0] = 3900
- Set: phy[4].reg[0] = 3900
- Set: phy[0].reg[0] = 3300
- Set: phy[1].reg[0] = 3300
- Set: phy[2].reg[0] = 3300
- Set: phy[3].reg[0] = 3300
- Set: phy[4].reg[0] = 3300
- resetMiiPortV over.
- ~ #
- ~ #
- ~ #
- ~ #
- ~ #
- ~ #
- ~ #
- ~ #
- ~ # ifconfig
- br0 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:10754 (10.5 KiB)
- eth0 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:7062 (6.8 KiB)
- Interrupt:3
- eth0.2 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E3
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:6034 (5.8 KiB)
- eth0.3 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:202 (202.0 B)
- eth0.4 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:202 (202.0 B)
- eth0.5 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:284 (284.0 B)
- eth0.6 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:202 (202.0 B)
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:11 errors:0 dropped:0 overruns:0 frame:0
- TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:4412 (4.3 KiB) TX bytes:4412 (4.3 KiB)
- ra0 Link encap:Ethernet HWaddr C4:71:54:B6:F9:E2
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:4
- ~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement